u-boot: add config for aarch64

[people/pmueller/ipfire-2.x.git] / config / u-boot / boot.cmd

diff --git a/config/u-boot/boot.cmd b/config/u-boot/boot.cmd
index 9d8d0e4023cbe587b79a67dfe3f21fee9e7edd5d..6679d679ab22c7e16ce60f32a2589cda2a1e7992 100644 (file)
--- a/config/u-boot/boot.cmd
+++ b/config/u-boot/boot.cmd
@@ -1,5 +1,20 @@
+if test ${boot_dev} = ""; then
+       setenv boot_dev mmc;
+       setenv root_dev /dev/mmcblk0p3;
+fi;
+
+if test ${boot_part} = ""; then
+       setenv boot_part 0:1;
+fi;
+
+if test ${soc} = "kirkwood"; then
+       setenv kernel_type kirkwood;
+else
+       setenv kernel_type multi;
+fi;
+
 # Import uEnv txt...
-if fatload mmc 0 ${kernel_addr_r} uEnv.txt; then
+if fatload ${boot_dev} ${boot_part} ${kernel_addr_r} uEnv.txt; then
        echo Load uEnv.txt...;
        env import -t ${kernel_addr_r} ${filesize};
        if test "${uenvcmd}" = ""; then
@@ -19,32 +34,38 @@ fi;
 if test "${SERIAL-CONSOLE}" = "ON"; then
        if test ${console} = ""; then
                if test "${board}" = "rpi"; then
-                       if test "${fdtfile}" = "bcm2837-rpi-3-b.dtb"; then
+                       if test "${fdtfile}" = "bcm2837-rpi-3-b-plus.dtb"; then
                                setenv console ttyS1,115200n8;
                        else
-                               setenv console ttyAMA0,115200n8;
+                               if test "${fdtfile}" = "bcm2837-rpi-3-b.dtb"; then
+                                       setenv console ttyS1,115200n8;
+                               else
+                                       setenv console ttyAMA0,115200n8;
+                               fi;
                        fi;
                else
                        setenv console ttyS0,115200n8;
                fi;
        fi
        echo Set console to ${console};
-       setenv bootargs console=${console} rootwait root=/dev/mmcblk0p3 rootwait;
+       setenv bootargs console=${console} root=${root_dev} rootwait;
 else
        echo Set console to tty1 ;
-       setenv bootargs console=tty1 rootwait root=/dev/mmcblk0p3 rootwait;
+       setenv bootargs console=tty1 root=${root_dev} rootwait;
 fi;
 
 setenv fdt_high ffffffff;
-fatload mmc 0:1 ${kernel_addr_r} vmlinuz-${KVER}-ipfire-multi;
-fatload mmc 0:1 ${fdt_addr_r} dtb-${KVER}-ipfire-multi/${fdtfile};
-if fatload mmc 0:1 ${ramdisk_addr_r} uInit-${KVER}-ipfire-multi; then
+fatload ${boot_dev} ${boot_part} ${kernel_addr_r} vmlinuz-${KVER}-ipfire-${kernel_type};
+fatload ${boot_dev} ${boot_part} ${fdt_addr_r} dtb-${KVER}-ipfire-${kernel_type}/${fdtfile};
+setenv ramdisk_addr ${ramdisk_addr_r}
+if fatload ${boot_dev} ${boot_part} ${ramdisk_addr} uInit-${KVER}-ipfire-${kernel_type}; then
        echo Ramdisk loaded...;
 else
        echo Ramdisk not loaded...;
-       setenv ramdisk_addr_r -;
+       setenv ramdisk_addr -;
 fi ;
-bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r};
+bootz ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r};
+booti ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r};
 
 # Recompile with:
 # mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr