. /etc/sysconfig/rc
. ${rc_functions}
-CHANNEL="05"
+CHANNEL="6"
+COUNTRY="00"
TXPOWER="auto"
INTERFACE="blue0"
MACMODE="0"
if [ -e "/sys/class/net/$INTERFACE/phy80211" ]; then
DRIVER="NL80211"
driver="nl80211"
- elif [ -e "/sys/class/net/$INTERFACE/madwifi_name_type" ]; then
- DRIVER="MADWIFI"
- driver="madwifi"
+ elif [ "$(/bin/grep hostap /sys/class/net/$INTERFACE/uevent)" != "" ]; then
+ DRIVER="HOSTAP"
+ driver="hostap"
else
boot_mesg "Interface $INTERFACE is a not supported wireless device." ${FAILURE}
echo_failure
chmod 644 /var/ipfire/wlanap/settings.tmp
mv /var/ipfire/wlanap/settings.tmp /var/ipfire/wlanap/settings
- if [ "$DRIVER" == "MADWIFI" ]; then
+ if [ "$DRIVER" == "HOSTAP" ]; then
if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
- boot_mesg "Setting MADWIFI wlan $INTERFACE to Master mode... "
- # Set Atheros Cards to master mode
- /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
- /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode ap > /dev/null
+ boot_mesg "Setting HOSTAP wlan $INTERFACE to Master mode... "
+ # Set Prism Cards to master mode
+ /usr/bin/iwconfig $INTERFACE mode master > /dev/null
fi
fi
- /usr/sbin/iwconfig $INTERFACE channel $CHANNEL
+ # First set to any country then reset to World (00)
+ # and then set new country because the card is only
+ # reprogrammed if the region was changed.
+ /usr/sbin/iw reg set DE
+ /usr/sbin/iw reg set 00
+ /usr/sbin/iw reg set $COUNTRY
+
+ /usr/sbin/iwconfig $INTERFACE channel $CHANNEL 2>/dev/null
/usr/sbin/iwconfig $INTERFACE txpower $TXPOWER
/usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf >/dev/null 2>&1 &
- sleep 2
-
- if [ $DRIVER == "MADWIFI" ]; then
- iwpriv $INTERFACE maccmd 3
- if [ $MACMODE != 0 ]; then
- FILE="/var/ipfire/wlanap/macfile"
- exec < $FILE
- while read LINE
- do
- iwpriv $INTERFACE addmac $LINE
- done
-
- iwpriv $INTERFACE maccmd $MACMODE
- fi
- fi
-
- sleep 2
+ sleep 3
if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
- boot_mesg "Error! Can't set wlan master mode"
- echo_failure;
+ killproc /usr/bin/hostapd > /dev/null 2>&1
+ boot_mesg "Try to create additional AP device ..."
+ ip link set ${INTERFACE} down
+ ip link set ${INTERFACE} name ${INTERFACE}_man
+ iw dev ${INTERFACE}_man interface add ${INTERFACE} type __ap
+ evaluate_retval;
+ if [ -d /sys/class/net/${INTERFACE} ]; then
+ /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf >/dev/null 2>&1 &
+ else
+ ip link set ${INTERFACE}_man down
+ ip link set ${INTERFACE}_man name ${INTERFACE}
+ fi
exit 0;
else
- # enable wlan module of collectd
- sed -i -e "s|#LoadPlugin wireless|LoadPlugin wireless|g" /etc/collectd.conf
echo_ok
fi
;;
stop)
boot_mesg "Stopping hostapd..."
-
+ ip link set ${INTERFACE} down > /dev/null 2>&1
+ ip link set ${INTERFACE} down_man > /dev/null 2>&1
+ sleep 1
killproc /usr/bin/hostapd
evaluate_retval
;;