# (File exists when the addon is installed.)
my $owncloud_meta = "/opt/pakfire/db/installed/meta-owncloud";
+
+# File declarations.
+my $settingsfile = "${General::swroot}/guardian/settings";
+my $ignoredfile = "${General::swroot}/guardian/ignored";
+
+# Create empty settings and ignoredfile if they do not exist yet.
+unless (-e "$settingsfile") { system("touch $settingsfile"); }
+unless (-e "$ignoredfile") { system("touch $ignoredfile"); }
+
our %settings = ();
+our %ignored = ();
$settings{'ACTION'} = '';
&BuildConfiguration();
}
-## Add a new entry to the ignore file.
+## Add/edit an entry to the ignore file.
#
-} elsif ($settings{'ACTION'} eq $Lang::tr{'add'}) {
+} elsif (($settings{'ACTION'} eq $Lang::tr{'add'}) || ($settings{'ACTION'} eq $Lang::tr{'update'})) {
# Check if any input has been performed.
- if ($settings{'NEW_IGNORE_ENTRY'} ne '') {
+ if ($settings{'IGNORE_ENTRY_ADDRESS'} ne '') {
# Check if the given input is no valid IP-address or IP-address with subnet, display an error message.
- if ((!&General::validip($settings{'NEW_IGNORE_ENTRY'})) && (!&General::validipandmask($settings{'NEW_IGNORE_ENTRY'}))) {
+ if ((!&General::validip($settings{'IGNORE_ENTRY_ADDRESS'})) && (!&General::validipandmask($settings{'IGNORE_ENTRY_ADDRESS'}))) {
$errormessage = "$Lang::tr{'guardian invalid address or subnet'}";
}
} else {
# Go further if there was no error.
if ($errormessage eq '') {
- my $new_entry = $settings{'NEW_IGNORE_ENTRY'};
+ my %ignored = ();
+ my $id;
+ my $status;
+
+ # Assign hash values.
+ my $new_entry_address = $settings{'IGNORE_ENTRY_ADDRESS'};
+ my $new_entry_remark = $settings{'IGNORE_ENTRY_REMARK'};
+
+ # Read-in ignoredfile.
+ &General::readhasharray($ignoredfile, \%ignored);
+
+ # Check if we should edit an existing entry and got an ID.
+ if (($settings{'ACTION'} eq $Lang::tr{'update'}) && ($settings{'ID'})) {
+ # Assin the provided id.
+ $id = $settings{'ID'};
+
+ # Undef the given ID.
+ undef($settings{'ID'});
+
+ # Grab the configured status of the corresponding entry.
+ $status = $ignored{$id}[2];
+ } else {
+ # Each newly added entry automatically should be enabled.
+ $status = "enabled";
+
+ # Generate the ID for the new entry.
+ #
+ # Sort the keys by it's ID and store them in an array.
+ my @keys = sort { $a <=> $b } keys %ignored;
+
+ # Reverse the key array.
+ my @reversed = reverse(@keys);
+
+ # Obtain the last used id.
+ my $last_id = @reversed[0];
- # Open file for appending the new entry.
- open (FILE, ">>$ignorefile") or die "Unable to open $ignorefile for writing";
+ # Increase the last id by one and use it as id for the new entry.
+ $id = ++$last_id;
+ }
+
+ # Add/Modify the entry to/in the ignored hash.
+ $ignored{$id} = ["$new_entry_address", "$new_entry_remark", "$status"];
- # Write the new entry to the ignore file.
- print FILE "$new_entry\n";
- close(FILE);
+ # Write the changed ignored hash to the ignored file.
+ &General::writehasharray($ignoredfile, \%ignored);
+
+ # Regenerate the ignore file.
+ # &GenerateIgnoreFile();
}
# Check if guardian is running.
&Guardian::Socket::Client("reload");
}
-## Remove entry from ignore list.
+## Toggle Enabled/Disabled for an existing entry on the ignore list.
#
-} elsif ($settings{'ACTION'} eq $Lang::tr{'remove'}) {
- my $id = 0;
- # Open ignorefile and read content.
- open(FILE, "<$ignorefile") or die "Unable to open $ignorefile.";
- my @current = <FILE>;
- close(FILE);
+} elsif ($settings{'ACTION'} eq $Lang::tr{'toggle enable disable'}) {
+ my %ignored = ();
+
+ # Only go further, if an ID has been passed.
+ if ($settings{'ID'}) {
+ # Assign the given ID.
+ my $id = $settings{'ID'};
+
+ # Undef the given ID.
+ undef($settings{'ID'});
+
+ # Read-in ignoredfile.
+ &General::readhasharray($ignoredfile, \%ignored);
+
+ # Grab the configured status of the corresponding entry.
+ my $status = $ignored{$id}[2];
+
+ # Switch the status.
+ if ($status eq "disabled") {
+ $status = "enabled";
+ } else {
+ $status = "disabled";
+ }
+
+ # Modify the status of the existing entry.
+ $ignored{$id} = ["$ignored{$id}[0]", "$ignored{$id}[1]", "$status"];
- # Re-open ignorefile for writing.
- open(FILE, ">$ignorefile") or die "Unable to open $ignorefile for writing";
- flock FILE, 2;
+ # Write the changed ignored hash to the ignored file.
+ &General::writehasharray($ignoredfile, \%ignored);
- # Read line by line from ignorefile and write them back except the line with the given ID.
- # So this line is missing in the new file and the entry has been deleted.
- foreach my $line (@current) {
- $id++;
- unless ($settings{'ID'} eq $id) {
- print FILE "$line";
+ # Regenerate the ignore file.
+ # &GenerateIgnoreFile();
+
+ # Check if guardian is running.
+ if ($pid > 0) {
+ # Send reload command through socket connection.
+ &Guardian::Socket::Client("reload");
}
}
- close(FILE);
+
+## Remove entry from ignore list.
+#
+} elsif ($settings{'ACTION'} eq $Lang::tr{'remove'}) {
+ my %ignored = ();
+
+ # Read-in ignoredfile.
+ &General::readhasharray($ignoredfile, \%ignored);
+
+ # Drop entry from the hash.
+ delete($ignored{$settings{'ID'}});
+
+ # Undef the given ID.
+ undef($settings{'ID'});
+
+ # Write the changed ignored hash to the ignored file.
+ &General::writehasharray($ignoredfile, \%ignored);
+
+ # Regenerate the ignore file.
+ # &GenerateIgnoreFile();
# Check if guardian is running.
if ($pid > 0) {
&Guardian::Socket::Client("flush");
}
-# Load settings from file.
+# Load settings from files.
&General::readhash("${General::swroot}/guardian/settings", \%settings);
+&General::readhasharray("${General::swroot}/guardian/ignored", \%ignored);
# Call functions to generate whole page.
&showMainBox();
&Header::openbox('100%', 'center', $Lang::tr{'guardian ignored hosts'});
print <<END;
- <table width='60%'>
+ <table width='80%'>
<tr>
- <td colspan='2' class='base' bgcolor='$color{'color20'}'><b>$Lang::tr{'guardian ignored hosts'}</b></td>
+ <td class='base' bgcolor='$color{'color20'}'><b>$Lang::tr{'ip address'}</b></td>
+ <td class='base' bgcolor='$color{'color20'}'><b>$Lang::tr{'remark'}</b></td>
+ <td class='base' colspan='3' bgcolor='$color{'color20'}'></td>
</tr>
END
- # Check if the guardian ignore file contains any content.
- if (-s $ignorefile) {
-
- # Open file and print contents.
- open FILE, $ignorefile or die "Could not open $ignorefile";
-
- my $id = 0;
+ # Check if some hosts have been add to be ignored.
+ if (keys (%ignored)) {
my $col = "";
- # Read file line by line and print out the elements.
- while( my $ignored_element = <FILE> ) {
-
- # Increase id number for each element in the ignore file.
- $id++;
-
- # Check if the id number is even or not.
- if ($id % 2) {
+ # Loop through all entries of the hash..
+ while( (my $key) = each %ignored) {
+ # Assign data array positions to some nice variable names.
+ my $address = $ignored{$key}[0];
+ my $remark = $ignored{$key}[1];
+ my $status = $ignored{$key}[2];
+
+ # Check if the key (id) number is even or not.
+ if ($settings{'ID'} eq $key) {
+ $col="bgcolor='${Header::colouryellow}'";
+ } elsif ($key % 2) {
$col="bgcolor='$color{'color22'}'";
} else {
$col="bgcolor='$color{'color20'}'";
}
+ # Choose icon for the checkbox.
+ my $gif;
+ my $gdesc;
+
+ # Check if the status is enabled and select the correct image and description.
+ if ($status eq 'enabled' ) {
+ $gif = 'on.gif';
+ $gdesc = $Lang::tr{'click to disable'};
+ } else {
+ $gif = 'off.gif';
+ $gdesc = $Lang::tr{'click to enable'};
+ }
+
print <<END;
<tr>
- <td width='80%' class='base' $col>$ignored_element</td>
- <td width='20%' align='center' $col>
- <form method='post' name='$id' action='$ENV{'SCRIPT_NAME'}'>
+ <td width='20%' class='base' $col>$address</td>
+ <td width='65%' class='base' $col>$remark</td>
+
+ <td align='center' $col>
+ <form method='post' action='$ENV{'SCRIPT_NAME'}'>
+ <input type='hidden' name='ACTION' value='$Lang::tr{'toggle enable disable'}' />
+ <input type='image' name='$Lang::tr{'toggle enable disable'}' src='/images/$gif' alt='$gdesc' title='$gdesc' />
+ <input type='hidden' name='ID' value='$key' />
+ </form>
+ </td>
+
+ <td align='center' $col>
+ <form method='post' action='$ENV{'SCRIPT_NAME'}'>
+ <input type='hidden' name='ACTION' value='$Lang::tr{'edit'}' />
+ <input type='image' name='$Lang::tr{'edit'}' src='/images/edit.gif' alt='$Lang::tr{'edit'}' title='$Lang::tr{'edit'}' />
+ <input type='hidden' name='ID' value='$key' />
+ </form>
+ </td>
+
+ <td align='center' $col>
+ <form method='post' name='$key' action='$ENV{'SCRIPT_NAME'}'>
<input type='image' name='$Lang::tr{'remove'}' src='/images/delete.gif' title='$Lang::tr{'remove'}' alt='$Lang::tr{'remove'}'>
- <input type='hidden' name='ID' value='$id'>
+ <input type='hidden' name='ID' value='$key'>
<input type='hidden' name='ACTION' value='$Lang::tr{'remove'}'>
</form>
</td>
</tr>
END
}
- close (FILE);
} else {
- # Print notice that currently no elements are stored in the ignore file.
+ # Print notice that currently no hosts are ignored.
print "<tr>\n";
print "<td class='base' colspan='2'>$Lang::tr{'guardian no entries'}</td>\n";
print "</tr>\n";
print "</table>\n";
- # Section to add new elements to the ignore list.
+ # Section to add new elements or edit existing ones.
print <<END;
<br>
+ <hr>
+ <br>
+
<div align='center'>
- <table width='60%'>
+ <table width='100%'>
+END
+
+ # Assign correct headline and button text.
+ my $buttontext;
+ my $entry_address;
+ my $entry_remark;
+
+ # Check if an ID (key) has been given, in this case an existing entry should be edited.
+ if ($settings{'ID'} ne '') {
+ $buttontext = $Lang::tr{'update'};
+ print "<tr><td class='boldbase' colspan='3'><b>$Lang::tr{'update'}</b></td></tr>\n";
+
+ # Grab address and remark for the given key.
+ $entry_address = $ignored{$settings{'ID'}}[0];
+ $entry_remark = $ignored{$settings{'ID'}}[1];
+ } else {
+ $buttontext = $Lang::tr{'add'};
+ print "<tr><td class='boldbase' colspan='3'><b>$Lang::tr{'dnsforward add a new entry'}</b></td></tr>\n";
+ }
+
+ print <<END;
<form method='post' action='$ENV{'SCRIPT_NAME'}'>
+ <input type='hidden' name='ID' value='$settings{'ID'}'>
<tr>
- <td width='30%'>$Lang::tr{'dnsforward add a new entry'}: </td>
- <td width='50%'><input type='text' name='NEW_IGNORE_ENTRY' value='' size='24' /></td>
- <td align='center' width='20%'><input type='submit' name='ACTION' value='$Lang::tr{'add'}' /></td>
+ <td width='30%'>$Lang::tr{'ip address'}: </td>
+ <td width='50%'><input type='text' name='IGNORE_ENTRY_ADDRESS' value='$entry_address' size='24' /></td>
+
+ <td width='30%'>$Lang::tr{'remark'}: </td>
+ <td wicth='50%'><input type='text' name=IGNORE_ENTRY_REMARK value='$entry_remark' size='24' /></td>
+ <td align='center' width='20%'><input type='submit' name='ACTION' value='$buttontext' /></td>
</tr>
</form>
</table>