cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0001-imx6qdl-wandboard-dts-backport.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0002-ARM-dts-imx6qdl-wandboard-add-gpio-lines-to-wandboar.patch
cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/wandboard/dts/0003-ARM-dts-imx6qdl-wandboard-Add-support-for-i2c1.patch
+
+ # Patchset for Compulab Utilite.
+ cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/kernel/utilite/linux-3.10-compulab-utilite-support.patch
endif
ifeq "$(KCFG)" "-rpi"
--- /dev/null
+Add initial support for cm-fx6 module.
+
+cm-fx6 is a module based on mx6q SoC with the following features:
+- Up to 4GB of DDR3
+- 1 LCD/DVI output port
+- 1 HDMI output port
+- 2 LVDS LCD ports
+- Gigabit Ethernet
+- Analog Audio
+- CAN
+- SATA
+- NAND
+- PCIE
+
+This patch allows to boot up the module, configures the serial console,
+the Ethernet adapter and the heartbeat led.
+
+cm-fx6 is embedded inside the Utilite computer.
+
+Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
+Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
+---
+
+Shawn, can this still be applied for 3.13 ?
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index f0895c5..7521a34 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
+ imx6dl-sabresd.dtb \
+ imx6dl-wandboard.dtb \
+ imx6q-arm2.dtb \
++ imx6q-cm-fx6.dtb \
+ imx6q-sabreauto.dtb \
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
+diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
+new file mode 100644
+index 0000000..2419751
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
+@@ -0,0 +1,53 @@
++/*
++ * Copyright 2013 CompuLab Ltd.
++ *
++ * Author: Valentin Raevsky <valentin@compulab.co.il>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/dts-v1/;
++#include "imx6q.dtsi"
++
++/ {
++ model = "CompuLab CM-FX6";
++ compatible = "compulab,cm-fx6", "fsl,imx6q";
++
++ memory {
++ reg = <0x10000000 0x80000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ heartbeat-led {
++ label = "Heartbeat";
++ gpios = <&gpio2 31 0>;
++ linux,default-trigger = "heartbeat";
++ };
++ };
++};
++
++&fec {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet_1>;
++ phy-mode = "rgmii";
++ status = "okay";
++};
++
++&gpmi {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
++ status = "okay";
++};
++
++&uart4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart4_1>;
++ status = "okay";
++};