]>
Commit | Line | Data |
---|---|---|
de125810 MT |
1 | .TH network-zone-bridge 8 "8 Jun 2012" "@VERSION@" "network man page" |
2 | ||
3 | .SH NAME | |
4 | network-zone-bridge \- Network Configuration Control Program | |
5 | ||
6 | .SH SYNOPSIS | |
7 | \fBnetwork [OPTIONS] zone create <zone> bridge ...\fR | |
8 | .P | |
9 | All options may be edited on zones which have already been set up with the \fBbridge\fR hook: | |
10 | .P | |
11 | \fBnetwork [OPTIONS] zone <zone> edit ...\fR | |
12 | ||
13 | .SH DESCRIPTION | |
14 | The bridge hook creates an ethernet bridge which acts as an unmanaged network | |
15 | switch. It contains one or multiple phyisical network interfaces or virtual | |
16 | devices which will be connected to each other. | |
17 | .PP | |
18 | The bridge hook is the prefered hook for local area network zones which are | |
19 | connected to an ethernet network. | |
20 | ||
21 | .SH OPTIONS | |
22 | The \fBbridge\fR hook offers various configuration options: | |
23 | ||
24 | \fB--stp\fR = [\fBon\fR|off] | |
25 | .RS 4 | |
26 | This option enables or disable the use of the \fBSpanning Tree Protocol\fR (STP). | |
27 | This protocol is used to avoid loops in networks by dynamically disabling packet | |
28 | forwarding on links. | |
29 | .PP | |
30 | It is highly recommended to leave this option enabled when you add more than | |
31 | one device to the zone. Read below how the behaviour of STP can be changed. | |
32 | .RE | |
33 | .PP | |
34 | ||
35 | \fB--mtu\fR = 1500 | |
36 | .RS 4 | |
37 | Sets the default MTU of the bridge. All ports in the bridge must support this | |
38 | MTU. | |
39 | .RE | |
40 | .PP | |
41 | ||
42 | \fB--mac\fR = ... | |
43 | .RS 4 | |
44 | By this option, you may define the MAC address of the bridge. If this option | |
45 | is missing, a random MAC address will be generated. | |
46 | .RE | |
47 | .PP | |
48 | ||
49 | Spanning Tree Protocol configuration options: | |
50 | ||
51 | \fB--stp-mode\fR = [\fBrstp\fR|stp] | |
52 | .RS 4 | |
53 | When STP is enabled, this option will set the operational mode which can either be: | |
54 | .PP | |
0a2bcb09 | 55 | * \fBSpanning Tree Protocol IEEE 802.1D\fR (stp) was introduced in 1998 by Radia |
de125810 MT |
56 | Perlman. |
57 | .P | |
0a2bcb09 | 58 | * \fBRapid Spanning Tree Protocol IEEE 802.1W\fR (rstp) which has much faster convergence |
de125810 MT |
59 | times and was introduced in 2004. This is the default option. |
60 | .RE | |
61 | .PP | |
62 | ||
63 | \fB--stp-forward-delay\fR = 0 | |
64 | .RS 4 | |
65 | This sets the default time the interfaces are hold off after they have been added | |
66 | to a bridge. The default value is 0. | |
67 | .RE | |
68 | .PP | |
69 | ||
70 | \fB--stp-hello\fR = 2 | |
71 | .RS 4 | |
72 | This option defines how often a hello message should be sent. The value is given in seconds | |
73 | and the default is 2. | |
74 | .RE | |
75 | .PP | |
76 | ||
77 | \fB--stp-priority\fR = 512 | |
78 | .RS 4 | |
79 | The STP priority sets the ranking of this network device within the network. The bridge | |
80 | with the best rank (0 is best) will become the root bridge. | |
81 | .RE | |
82 | .PP | |
83 | ||
84 | .SH SEE ALSO | |
85 | network(8) | |
86 | ||
87 | .SH AUTHOR | |
88 | Michael Tremer (michael.tremer@ipfire.org) |