kernel: add arm (versatile and kirkwood) cfg for 3.2.x.

[people/teissler/ipfire-2.x.git] / src / patches / linux-3.2.25-arm_kirkwood_setups.patch

diff -Naur linux-3.2.25.org/arch/arm/mach-kirkwood/dreamplug-setup.c linux-3.2.25/arch/arm/mach-kirkwood/dreamplug-setup.c
--- linux-3.2.25.org/arch/arm/mach-kirkwood/dreamplug-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-3.2.25/arch/arm/mach-kirkwood/dreamplug-setup.c	2012-08-05 19:04:12.000000000 +0200
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-kirkwood/dreamplug-setup.c
+ *
+ * Marvell DreamPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+	.type		= "mx25l1606e",
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &dreamplug_spi_slave_data,
+		.irq		= -1,
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data dreamplug_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
+	/* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+	{
+		.name			= "dreamplug:blue:bluetooth",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+	{
+		.name			= "dreamplug:green:wlan",
+		.gpio			= 48,
+		.active_low		= 1,
+	},
+	{
+		.name			= "dreamplug:blue:wlanap",
+		.gpio			= 49,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+	.leds		= dreamplug_led_pins,
+	.num_leds	= ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static struct platform_device dreamplug_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dreamplug_led_data,
+	}
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_GPIO,
+	MPP5_GPO,
+	MPP7_GPO,
+	MPP18_GPO,
+	MPP19_GPO,
+	MPP47_GPIO,	/* B_BLED */
+	MPP48_GPIO,	/* W_GLED */
+	MPP49_GPIO,	/* W_BLED */
+	0
+};
+
+static void __init dreamplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(dreamplug_mpp_config);
+
+	kirkwood_uart0_init();
+
+	spi_register_board_info(dreamplug_spi_slave_info,
+				ARRAY_SIZE(dreamplug_spi_slave_info));
+
+	kirkwood_spi_init();
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dreamplug_ge00_data);
+	kirkwood_ge01_init(&dreamplug_ge01_data);
+	kirkwood_sata_init(&dreamplug_sata_data);
+	kirkwood_sdio_init(&dreamplug_mvsdio_data);
+
+	platform_device_register(&dreamplug_leds);
+}
+
+MACHINE_START(DREAMPLUG, "Marvell DreamPlug Reference Board")
+	/* Maintainer: Siddarth Gore <gores <at> marvell.com> */
+	.atag_offset	= 0x100,
+	.init_machine	= dreamplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff -Naur linux-3.2.25.org/arch/arm/mach-kirkwood/guruplug-setup.c linux-3.2.25/arch/arm/mach-kirkwood/guruplug-setup.c
--- linux-3.2.25.org/arch/arm/mach-kirkwood/guruplug-setup.c	2012-08-02 15:38:04.000000000 +0200
+++ linux-3.2.25/arch/arm/mach-kirkwood/guruplug-setup.c	2012-08-05 19:05:22.000000000 +0200
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
@@ -27,15 +28,16 @@
 	{
 		.name = "u-boot",
 		.offset = 0,
-		.size = SZ_1M
+		.size = SZ_1M,
+		.mask_flags = MTD_WRITEABLE, /* read only */
 	}, {
 		.name = "uImage",
 		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
+		.size = SZ_4M,
 	}, {
 		.name = "root",
 		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
+		.size = MTDPART_SIZ_FULL,
 	},
 };
 
diff -Naur linux-3.2.25.org/arch/arm/mach-kirkwood/iconnect-setup.c linux-3.2.25/arch/arm/mach-kirkwood/iconnect-setup.c
--- linux-3.2.25.org/arch/arm/mach-kirkwood/iconnect-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-3.2.25/arch/arm/mach-kirkwood/iconnect-setup.c	2012-08-05 19:06:06.000000000 +0200
@@ -0,0 +1,212 @@
+/*
+ * arch/arm/mach-kirkwood/iconnect-setup.c
+ *
+ * Iomega iConnect Wireless Data Station Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition iconnect_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M,
+		.mask_flags = MTD_WRITEABLE, /* read only */
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 0x440000,
+	}, {
+		.name = "uInit",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = 0x440000,
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0xB),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+	{
+		.name			= "iconnect:led_level",
+		.default_trigger	= "default-on",
+		.gpio			= 41,
+		.active_low		= 0,
+	},
+
+	{
+		.name			= "iconnect:blue:power",
+		.default_trigger	= "default-on",
+		.gpio			= 42,
+		.active_low		= 0,
+	},
+	{
+		.name			= "iconnect:red:power",
+		.default_trigger	= "none",
+		.gpio			= 43,
+		.active_low		= 0,
+	},
+	{
+		.name			= "iconnect:blue:usb_1",
+		.default_trigger	= "none",
+		.gpio			= 44,
+		.active_low		= 0,
+	},
+	{
+		.name			= "iconnect:blue:usb_2",
+		.default_trigger	= "none",
+		.gpio			= 45,
+		.active_low		= 0,
+	},
+	{
+		.name			= "iconnect:blue:usb_3",
+		.default_trigger	= "none",
+		.gpio			= 46,
+		.active_low		= 0,
+	},
+	{
+		.name			= "iconnect:blue:usb_4",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 0,
+	},
+	{
+		.name			= "iconnect:blue:otb",
+		.default_trigger	= "none",
+		.gpio			= 48,
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+	.leds		= iconnect_led_pins,
+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
+};
+
+static struct platform_device iconnect_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &iconnect_led_data,
+	}
+};
+
+static struct gpio_keys_button iconnect_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 35,
+		.desc		= "OTB Button",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 12,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+	.buttons	= iconnect_buttons,
+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &iconnect_button_data,
+	}
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP12_GPIO,	/* Reset Button */
+	MPP35_GPIO,	/* OTB Button */
+
+	MPP41_GPIO,	/* LED Level */
+	MPP42_GPIO,	/* Power LED blue */
+	MPP43_GPIO,	/* Power LED red */
+	MPP44_GPIO,	/* USB LED 1 */
+	MPP45_GPIO,	/* USB LED 2 */
+	MPP46_GPIO,	/* USB LED 3 */
+	MPP47_GPIO,	/* USB LED 4 */
+	MPP48_GPIO,	/* OTB LED */
+	0
+};
+
+static struct i2c_board_info __initdata iconnect_i2c = {
+	I2C_BOARD_INFO("lm63", 0x4c),
+};
+
+static void __init iconnect_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(iconnect_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&iconnect_ge00_data);
+
+	kirkwood_uart0_init();
+	platform_device_register(&iconnect_leds);
+	platform_device_register(&iconnect_button_device);
+
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &iconnect_i2c,1);
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (machine_is_iconnect()) {
+		kirkwood_pcie_init(KW_PCIE0);
+	}
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);
+
+MACHINE_START(ICONNECT, "Iomega iConnect Wireless Data Station")
+	/* Maintainer: Arne Fitzenreiter <arne_f@ipfire.org> */
+	.atag_offset	= 0x100,
+	.init_machine	= iconnect_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff -Naur linux-3.2.25.org/arch/arm/mach-kirkwood/Kconfig linux-3.2.25/arch/arm/mach-kirkwood/Kconfig
--- linux-3.2.25.org/arch/arm/mach-kirkwood/Kconfig	2012-08-02 15:38:04.000000000 +0200
+++ linux-3.2.25/arch/arm/mach-kirkwood/Kconfig	2012-08-05 18:45:22.015253501 +0200
@@ -44,6 +44,12 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell GuruPlug Reference Board.
 
+config MACH_DREAMPLUG
+	bool "Marvell DreamPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DreamPlug Reference Board.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
@@ -130,6 +136,18 @@
 	  Say 'Y' here if you want your kernel to support the
 	  HP t5325 Thin Client.
 
+config MACH_ICONNECT
+	bool "Iomega iConnect Wireless Data Station"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Iomega iConnect Wireless Data Station.
+
+config MACH_NAS6210
+	bool "Raidsonic ICY BOX IB-62x0"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Raidsonic ICY BOX IB-62x0.
+
 endmenu
 
 endif
diff -Naur linux-3.2.25.org/arch/arm/mach-kirkwood/Makefile linux-3.2.25/arch/arm/mach-kirkwood/Makefile
--- linux-3.2.25.org/arch/arm/mach-kirkwood/Makefile	2012-08-02 15:38:04.000000000 +0200
+++ linux-3.2.25/arch/arm/mach-kirkwood/Makefile	2012-08-05 18:46:49.015253501 +0200
@@ -7,6 +7,7 @@
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+obj-$(CONFIG_MACH_DREAMPLUG)		+= dreamplug-setup.o
 obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
@@ -18,5 +19,7 @@
 obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
+obj-$(CONFIG_MACH_ICONNECT)		+= iconnect-setup.o
+obj-$(CONFIG_MACH_NAS6210)		+= nas6210-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff -Naur linux-3.2.25.org/arch/arm/mach-kirkwood/mpp.h linux-3.2.25/arch/arm/mach-kirkwood/mpp.h
--- linux-3.2.25.org/arch/arm/mach-kirkwood/mpp.h	2012-08-02 15:38:04.000000000 +0200
+++ linux-3.2.25/arch/arm/mach-kirkwood/mpp.h	2012-08-05 19:08:23.835566001 +0200
@@ -102,6 +102,7 @@
 #define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 0, 0,   1,   1,   1,   1 )
 
 #define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_GPIO		MPP( 12, 0x0, 1, 1, 1,   1,   1,   1,   1 )
 #define MPP12_SD_CLK		MPP( 12, 0x1, 0, 0, 1,   1,   1,   1,   1 )
 #define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 0, 0,   0,   0,   0,   1 )
 #define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 0, 0,   0,   0,   0,   1 )
diff -Naur linux-3.2.25.org/arch/arm/mach-kirkwood/nas6210-setup.c linux-3.2.25/arch/arm/mach-kirkwood/nas6210-setup.c
--- linux-3.2.25.org/arch/arm/mach-kirkwood/nas6210-setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-3.2.25/arch/arm/mach-kirkwood/nas6210-setup.c	2012-08-05 19:06:40.000000000 +0200
@@ -0,0 +1,184 @@
+/*
+ * arch/arm/mach-kirkwood/nas6210-setup.c
+ *
+ * Raidsonic ICYBOX NAS6210 and 6220 Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define NAS6210_GPIO_POWER_OFF 24
+
+static struct mtd_partition nas6210_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M,
+		.mask_flags = MTD_WRITEABLE, /* read only */
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = (SZ_1M*6),
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mv643xx_eth_platform_data nas6210_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data nas6210_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_led nas6210_led_pins[] = {
+	{
+		.name			= "nas6210:green:power",
+		.default_trigger	= "default-on",
+		.gpio			= 25,
+		.active_low		= 0,
+	},
+	{
+		.name			= "nas6210:red:power",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= 0,
+	},
+	{
+		.name			= "nas6210:red:usb_copy",
+		.default_trigger	= "none",
+		.gpio			= 27,
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data nas6210_led_data = {
+	.leds		= nas6210_led_pins,
+	.num_leds	= ARRAY_SIZE(nas6210_led_pins),
+};
+
+static struct platform_device nas6210_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &nas6210_led_data,
+	}
+};
+
+static struct gpio_keys_button nas6210_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 29,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 28,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data nas6210_button_data = {
+	.buttons	= nas6210_buttons,
+	.nbuttons	= ARRAY_SIZE(nas6210_buttons),
+};
+
+static struct platform_device nas6210_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &nas6210_button_data,
+	}
+};
+
+static unsigned int nas6210_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP22_GPIO,	/* Power LED red */
+	MPP24_GPIO,	/* Power off */
+	MPP25_GPIO,	/* Power LED green */
+	MPP27_GPIO,    /* USB transfer LED */
+	MPP28_GPIO,    /* Reset button */
+	MPP29_GPIO,    /* USB Copy button */
+	0
+};
+
+void nas6210_power_off(void)
+{
+	gpio_set_value(NAS6210_GPIO_POWER_OFF, 1);
+	while(1);
+}
+
+static void __init nas6210_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(nas6210_mpp_config);
+
+	kirkwood_nand_init(ARRAY_AND_SIZE(nas6210_nand_parts), 25);
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&nas6210_ge00_data);
+	kirkwood_sata_init(&nas6210_sata_data);
+	kirkwood_uart0_init();
+	platform_device_register(&nas6210_leds);
+	platform_device_register(&nas6210_button_device);
+
+	if (gpio_request(NAS6210_GPIO_POWER_OFF, "power-off") == 0 &&
+		gpio_direction_output(NAS6210_GPIO_POWER_OFF, 0) == 0)
+			pm_power_off = nas6210_power_off;
+
+	else
+		pr_err("nas6210: failed to configure power-off gpio pin");
+}
+
+static int __init nas6210_pci_init(void)
+{
+	if (machine_is_nas6210()) {
+		kirkwood_pcie_init(KW_PCIE0);
+	}
+	return 0;
+}
+subsys_initcall(nas6210_pci_init);
+
+MACHINE_START(NAS6210, "RaidSonic ICY BOX IB-NAS62x0")
+	/* Maintainer: Arne Fitzenreiter <arne_f@ipfire.org> */
+	.atag_offset	= 0x00000100,
+	.init_machine	= nas6210_init,
+	.map_io		= kirkwood_map_io,
+	.init_early	= kirkwood_init_early,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff -Naur linux-3.2.25.org/arch/arm/tools/mach-types linux-3.2.25/arch/arm/tools/mach-types
--- linux-3.2.25.org/arch/arm/tools/mach-types	2012-08-02 15:38:04.000000000 +0200
+++ linux-3.2.25/arch/arm/tools/mach-types	2012-08-05 18:39:17.218378501 +0200
@@ -455,9 +455,9 @@
 mx23evk			MACH_MX23EVK		MX23EVK			2629
 ap4evb			MACH_AP4EVB		AP4EVB			2630
 mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
-guruplug		MACH_GURUPLUG		GURUPLUG		2659
+dreamplug		MACH_DREAMPLUG		DREAMPLUG		2659
 spear310		MACH_SPEAR310		SPEAR310		2660
-spear320		MACH_SPEAR320		SPEAR320		2661
+guruplug		MACH_GURUPLUG		GURUPLUG		2661
 aquila			MACH_AQUILA		AQUILA			2676
 sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
 msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679