]> git.ipfire.org Git - people/teissler/ipfire-2.x.git/blobdiff - config/firewall/rules.pl
firewall: rules.pl: Refactored entire script.
[people/teissler/ipfire-2.x.git] / config / firewall / rules.pl
index b5555d168228a000f5407bffbf706f5923579510..d2991b897c6f64a4447266991358ee9ff616bb66 100755 (executable)
@@ -31,25 +31,27 @@ my $DEBUG = 0;
 my $IPTABLES = "iptables --wait";
 
 # iptables chains
-my $CHAIN                 = "FORWARDFW";
+my $CHAIN_INPUT           = "INPUTFW";
+my $CHAIN_FORWARD         = "FORWARDFW";
+my $CHAIN_OUTPUT          = "OUTPUTFW";
+my $CHAIN                 = $CHAIN_FORWARD;
 my $CHAIN_NAT_SOURCE      = "NAT_SOURCE";
 my $CHAIN_NAT_DESTINATION = "NAT_DESTINATION";
+my @VALID_CHAINS          = ($CHAIN_INPUT, $CHAIN_FORWARD, $CHAIN_OUTPUT);
+
+my @PROTOCOLS = ("tcp", "udp", "icmp", "igmp", "ah", "esp", "gre", "ipv6", "ipip");
+my @PROTOCOLS_WITH_PORTS = ("tcp", "udp");
+
+my @VALID_TARGETS = ("ACCEPT", "DROP", "REJECT");
 
 my %fwdfwsettings=();
 my %defaultNetworks=();
-my %configfwdfw=();
-my %color=();
-my %icmptypes=();
-my %ovpnSettings=();
+my %configfwdfw=();;
 my %customgrp=();
-our %sourcehash=();
-our %targethash=();
-my @timeframe=();
 my %configinputfw=();
 my %configoutgoingfw=();
 my %confignatfw=();
 my %aliases=();
-my @DPROT=();
 my @p2ps=();
 
 my $configfwdfw                = "${General::swroot}/firewall/config";
@@ -58,14 +60,6 @@ my $configoutgoing  = "${General::swroot}/firewall/outgoing";
 my $p2pfile                    = "${General::swroot}/firewall/p2protocols";
 my $configgrp          = "${General::swroot}/fwhosts/customgroups";
 my $netsettings                = "${General::swroot}/ethernet/settings";
-my $errormessage       = '';
-my $orange                     = '';
-my $green                      = '';
-my $blue                       = '';
-my ($TYPE,$PROT,$SPROT,$DPROT,$SPORT,$DPORT,$SRC_TGT);
-my $conexists          = 'off';
-my $dnat                       ='';
-my $snat                       ='';
 
 &General::readhash("${General::swroot}/firewall/settings", \%fwdfwsettings);
 &General::readhash("$netsettings", \%defaultNetworks);
@@ -75,19 +69,6 @@ my $snat                     ='';
 &General::readhasharray($configgrp, \%customgrp);
 &General::get_aliases(\%aliases);
 
-#check if we have an internetconnection
-open (CONN,"/var/ipfire/red/iface");
-my $con = <CONN>;
-close(CONN);
-
-if (-f "/var/ipfire/red/active"){
-       $conexists='on';
-}
-
-open (CONN1,"/var/ipfire/red/local-ipaddress");
-my $redip = <CONN1>;
-close(CONN1);
-
 # MAIN
 &main();
 
@@ -122,6 +103,18 @@ sub print_error {
        print STDERR "$message\n";
 }
 
+sub print_rule {
+       my $hash = shift;
+
+       print "\nRULE:";
+
+       my $i = 0;
+       foreach (@$hash) {
+               printf("  %2d: %s", $i++, $_);
+       }
+       print "\n";
+}
+
 sub flush {
        run("$IPTABLES -F FORWARDFW");
        run("$IPTABLES -F INPUTFW");
@@ -143,272 +136,249 @@ sub preparerules {
 }
 
 sub buildrules {
-       my $hash=shift;
-       my $STAG;
-       my $snatport;
-       my $fireport;
-       my $fwaccessdport;
-       my $natchain;
-       my $icmptype;
-       foreach my $key (sort {$a <=> $b} keys %$hash){
-               next if (($$hash{$key}[6] eq 'RED' || $$hash{$key}[6] eq 'RED1') && $conexists eq 'off' );
+       my $hash = shift;
+
+       foreach my $key (sort {$a <=> $b} keys %$hash) {
+               # Skip disabled rules.
+               next unless ($$hash{$key}[2] eq 'ON');
+
+               if ($DEBUG) {
+                       print_rule($$hash{$key});
+               }
+
+               # Check if the target is valid.
+               my $target = $$hash{$key}[0];
+               if (!$target ~~ @VALID_TARGETS) {
+                       print_error("Invalid target '$target' for rule $key");
+                       next;
+               }
+
+               # Check if the chain is valid.
+               my $chain = $$hash{$key}[1];
+               if (!$chain ~~ @VALID_CHAINS) {
+                       print_error("Invalid chain '$chain' in rule $key");
+                       next;
+               }
+
+               # Collect all sources.
+               my @sources = &get_addresses($hash, $key, "src");
+
+               # Collect all destinations.
+               my @destinations = &get_addresses($hash, $key, "tgt");
 
                my $time_constraints = "";
-               my $natip = "";
 
                # Check if logging should be enabled.
-               my $LOG = 0;
-               if ($$hash{$key}[17] eq 'ON') {
-                       $LOG = 1;
-               }
+               my $LOG = ($$hash{$key}[17] eq 'ON');
 
-               my $NAT = 0;
+               # Check if NAT is enabled and initialize variables, that we use for that.
+               my $NAT = ($$hash{$key}[28] eq 'ON');
                my $NAT_MODE;
+               if ($NAT) {
+                       $NAT_MODE = uc($$hash{$key}[31]);
+               }
 
-               # Check if NAT is enabled and initialize variables, that we use for that.
-               if ($$hash{$key}[28] eq 'ON') {
-                       $NAT = 1;
-
-                       # Destination NAT
-                       if ($$hash{$key}[31] eq 'dnat') {
-                               $NAT_MODE = "DNAT";
-
-                               if ($$hash{$key}[30] =~ /\|/) {
-                                       $$hash{$key}[30]=~ tr/|/,/;
-                                       $fireport='-m multiport --dport '.$$hash{$key}[30];
-                               } else {
-                                       $fireport='--dport '.$$hash{$key}[30] if ($$hash{$key}[30]>0);
-                               }
+               # Set up time constraints.
+               my @time_options = ();
+               if ($$hash{$key}[18] eq 'ON') {
+                       push(@time_options, ("-m", "time"));
 
-                       # Source NAT
-                       } elsif ($$hash{$key}[31] eq 'snat') {
-                               $NAT_MODE = "SNAT";
+                       # Select all days of the week this match is active.
+                       my @weekdays = ();
+                       if ($$hash{$key}[19] ne '') {
+                               push (@weekdays, "Mon");
+                       }
+                       if ($$hash{$key}[20] ne '') {
+                               push (@weekdays, "Tue");
+                       }
+                       if ($$hash{$key}[21] ne '') {
+                               push (@weekdays, "Wed");
+                       }
+                       if ($$hash{$key}[22] ne '') {
+                               push (@weekdays, "Thu");
+                       }
+                       if ($$hash{$key}[23] ne '') {
+                               push (@weekdays, "Fri");
+                       }
+                       if ($$hash{$key}[24] ne '') {
+                               push (@weekdays, "Sat");
+                       }
+                       if ($$hash{$key}[25] ne '') {
+                               push (@weekdays, "Sun");
+                       }
+                       if (@weekdays) {
+                               push(@time_options, ("--weekdays", join(",", @weekdays)));
+                       }
 
-                       } else {
-                               print_error("Invalid NAT mode: $$hash{$key}[31]");
-                               next;
+                       # Convert start time.
+                       my $time_start = &format_time($$hash{$key}[26]);
+                       if ($time_start) {
+                               push(@time_options, ("--timestart", $time_start));
                        }
 
-                       $natip = &get_nat_ip($$hash{$key}[29], $NAT_MODE);
+                       # Convert end time.
+                       my $time_stop = &format_time($$hash{$key}[27]);
+                       if ($time_stop) {
+                               push(@time_options, ("--timestop", $time_stop));
+                       }
                }
 
-               $STAG='';
-               if($$hash{$key}[2] eq 'ON'){
-                       #get source ip's
-                       if ($$hash{$key}[3] eq 'cust_grp_src'){
-                               foreach my $grp (sort {$a <=> $b} keys %customgrp){
-                                               if($customgrp{$grp}[0] eq $$hash{$key}[4]){
-                                               &get_address($customgrp{$grp}[3],$customgrp{$grp}[2],"src");
-                                       }
-                               }
-                       }else{
-                               &get_address($$hash{$key}[3],$$hash{$key}[4],"src");
+               # Check which protocols are used in this rule and so that we can
+               # later group rules by protocols.
+               my @protocols = &get_protocols($hash, $key);
+               if (!@protocols) {
+                       print_error("Invalid protocol configuration for rule $key");
+                       next;
+               }
+
+               foreach my $protocol (@protocols) {
+                       # Check if the given protocol is supported.
+                       if (($protocol ne "all") && (!$protocol ~~ @PROTOCOLS)) {
+                               print_error("Protocol $protocol is not supported (rule $key)");
+                               next;
                        }
-                       #get target ip's
-                       if ($$hash{$key}[5] eq 'cust_grp_tgt'){
-                               foreach my $grp (sort {$a <=> $b} keys %customgrp){
-                                       if($customgrp{$grp}[0] eq $$hash{$key}[6]){
-                                               &get_address($customgrp{$grp}[3],$customgrp{$grp}[2],"tgt");
+
+                       # Prepare protocol options (like ICMP types, ports, etc...).
+                       my @protocol_options = &get_protocol_options($hash, $key, $protocol);
+
+                       # Check if this protocol knows ports.
+                       my $protocol_has_ports = ($protocol ~~ @PROTOCOLS_WITH_PORTS);
+
+                       foreach my $source (@sources) {
+                               foreach my $destination (@destinations) {
+                                       # Skip invalid rules.
+                                       next if (!$source || !$destination || ($destination eq "none"));
+
+                                       # Array with iptables arguments.
+                                       my @options = ();
+
+                                       # Append protocol.
+                                       if ($protocol ne "all") {
+                                               push(@options, ("-p", $protocol));
+                                               push(@options, @protocol_options);
                                        }
-                               }
-                       }elsif($$hash{$key}[5] eq 'ipfire' ){
-                               if($$hash{$key}[6] eq 'GREEN'){
-                                       $targethash{$key}[0]=$defaultNetworks{'GREEN_ADDRESS'};
-                               }
-                               if($$hash{$key}[6] eq 'BLUE'){
-                                       $targethash{$key}[0]=$defaultNetworks{'BLUE_ADDRESS'};
-                               }
-                               if($$hash{$key}[6] eq 'ORANGE'){
-                                       $targethash{$key}[0]=$defaultNetworks{'ORANGE_ADDRESS'};
-                               }
-                               if($$hash{$key}[6] eq 'ALL'){
-                                       $targethash{$key}[0]='0.0.0.0/0';
-                               }
-                               if($$hash{$key}[6] eq 'RED' || $$hash{$key}[6] eq 'RED1'){
-                                       open(FILE, "/var/ipfire/red/local-ipaddress")or die "Couldn't open local-ipaddress";
-                                       $targethash{$key}[0]= <FILE>;
-                                       close(FILE);
-                               }else{
-                                       foreach my $alias (sort keys %aliases){
-                                               if ($$hash{$key}[6] eq $alias){
-                                                       $targethash{$key}[0]=$aliases{$alias}{'IPT'};
-                                               }
+
+                                       # Append source.
+                                       if ($source =~ /mac/) {
+                                               push(@options, $source);
+                                       } else {
+                                               push(@options, ("-s", $source));
                                        }
-                               }
-                       }else{
-                               &get_address($$hash{$key}[5],$$hash{$key}[6],"tgt");
-                       }
-                       ##get source prot and port
-                       $SRC_TGT='SRC';
-                       $SPORT = &get_port($hash,$key);
-                       $SRC_TGT='';
 
-                       ##get target prot and port
-                       $DPROT=&get_prot($hash,$key);
+                                       # Append destination for non-DNAT rules.
+                                       unless ($NAT && ($NAT_MODE eq "DNAT")) {
+                                               push(@options, ("-d", $destination));
+                                       }
 
-                       if ($DPROT eq ''){$DPROT=' ';}
-                       @DPROT=split(",",$DPROT);
+                                       # Add time constraint options.
+                                       push(@options, @time_options);
 
-                       # Set up time constraints.
-                       if ($$hash{$key}[18] eq 'ON') {
-                               my @time_args = ("-m", "time");
+                                       # Process NAT rules.
+                                       if ($NAT) {
+                                               my $nat_address = &get_nat_address($$hash{$key}[29]);
 
-                               # Select all days of the week this match is active.
-                               my @weekdays = ();
-                               if ($$hash{$key}[19] ne '') {
-                                       push (@weekdays, "Mon");
-                               }
-                               if ($$hash{$key}[20] ne '') {
-                                       push (@weekdays, "Tue");
-                               }
-                               if ($$hash{$key}[21] ne '') {
-                                       push (@weekdays, "Wed");
-                               }
-                               if ($$hash{$key}[22] ne '') {
-                                       push (@weekdays, "Thu");
-                               }
-                               if ($$hash{$key}[23] ne '') {
-                                       push (@weekdays, "Fri");
-                               }
-                               if ($$hash{$key}[24] ne '') {
-                                       push (@weekdays, "Sat");
-                               }
-                               if ($$hash{$key}[25] ne '') {
-                                       push (@weekdays, "Sun");
-                               }
-                               if (@weekdays) {
-                                       push(@time_args, ("--weekdays", join(",", @weekdays)));
-                               }
+                                               # Skip NAT rules if the NAT address is unknown
+                                               # (i.e. no internet connection has been established, yet).
+                                               next unless ($nat_address);
 
-                               # Convert start time.
-                               my $time_start = &format_time($$hash{$key}[26]);
-                               if ($time_start) {
-                                       push(@time_args, ("--timestart", $time_start));
-                               }
+                                               # Destination NAT
+                                               if ($NAT_MODE eq "DNAT") {
+                                                       my ($dnat_address, $dnat_mask) = split("/", $destination);
 
-                               # Convert end time.
-                               my $time_stop = &format_time($$hash{$key}[27]);
-                               if ($time_stop) {
-                                       push(@time_args, ("--timestop", $time_stop));
-                               }
+                                                       my @nat_options = @options;
+                                                       push(@nat_options, ("-d", $nat_address));
+                                                       push(@options,     ("-d", $dnat_address));
 
-                               # Format command line.
-                               $time_constraints = join(" ", @time_args);
-                       }
+                                                       if ($protocol_has_ports) {
+                                                               my $dnat_port = &get_dnat_target_port($hash, $key);
 
-                       foreach my $DPROT (@DPROT){
-                               $DPORT = &get_port($hash,$key,$DPROT);
-                               $PROT=$DPROT;
-                               $PROT="-p $PROT" if ($PROT ne '' && $PROT ne ' ');
-                               if ($DPROT ne 'TCP' && $DPROT ne'UDP' && $DPROT ne 'ICMP' ){
-                                       $DPORT='';
-                               }
-                               foreach my $a (sort keys %sourcehash){
-                                       foreach my $b (sort keys %targethash){
-                                               if(! $sourcehash{$a}[0] || ! $targethash{$b}[0] || ($natip eq '-d ' && $NAT) || (!$natip && $NAT)){
-                                                       #Skip rules when no RED IP is set (DHCP,DSL)
-                                                       next;
-                                               }
-                                               next if ($targethash{$b}[0] eq 'none');
-                                               $STAG='';
-                                               if ($sourcehash{$a}[0] ne $targethash{$b}[0] && $targethash{$b}[0] ne 'none' || $sourcehash{$a}[0] eq '0.0.0.0/0.0.0.0'){
-                                                       if($DPROT ne ''){
-                                                               if(substr($sourcehash{$a}[0], 3, 3) ne 'mac' && $sourcehash{$a}[0] ne ''){ $STAG="-s";}
-                                                               #Process ICMP RULE
-                                                               if(substr($DPORT, 2, 4) eq 'icmp'){
-                                                                       my @icmprule= split(",",substr($DPORT, 12,));
-                                                                       foreach (@icmprule){
-                                                                               $icmptype="--icmp-type ";
-                                                                               if ($_ eq "BLANK") {
-                                                                                               $icmptype="";
-                                                                                               $_="";
-                                                                               }
-                                                                               if ($LOG) {
-                                                                                       run("$IPTABLES -A $$hash{$key}[1] $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $icmptype $_ $time_constraints -j LOG");
-                                                                               }
-                                                                               run("$IPTABLES -A $$hash{$key}[1] $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $icmptype $_ $time_constraints -j $$hash{$key}[0]");
-                                                                       }
-                                                               #PROCESS DNAT RULE (Portforward)
-                                                               } elsif ($NAT && $NAT_MODE eq "DNAT") {
-                                                                       if ($LOG) {
-                                                                               run("$IPTABLES -t nat -A $CHAIN_NAT_DESTINATION $PROT $STAG $sourcehash{$a}[0] $SPORT $natip $fireport $time_constraints -j LOG --log-prefix 'DNAT'");
-                                                                       }
-                                                                       my ($ip,$sub) =split("/",$targethash{$b}[0]);
-                                                                       #Process NAT with servicegroup used
-                                                                       if ($$hash{$key}[14] eq 'cust_srvgrp') {
-                                                                               run("$IPTABLES -t nat -A $CHAIN_NAT_DESTINATION $PROT $STAG $sourcehash{$a}[0] $SPORT $natip $fireport $time_constraints -j DNAT --to-destination $ip $DPORT");
-                                                                               $fwaccessdport=$DPORT;
-                                                                       } else {
-                                                                               run("$IPTABLES -t nat -A $CHAIN_NAT_DESTINATION $PROT $STAG $sourcehash{$a}[0] $SPORT $natip $fireport $time_constraints -j DNAT --to-destination $ip$DPORT");
-                                                                               $DPORT =~ s/\-/:/g;
-                                                                               if ($DPORT){
-                                                                                       $fwaccessdport="--dport ".substr($DPORT,1,);
-                                                                               }elsif(! $DPORT && $$hash{$key}[30] ne ''){
-                                                                                       if ($$hash{$key}[30]=~m/|/i){
-                                                                                               $$hash{$key}[30] =~ s/\|/,/g;
-                                                                                               $fwaccessdport="-m multiport --dport $$hash{$key}[30]";
-                                                                                       }else{
-                                                                                               $fwaccessdport="--dport $$hash{$key}[30]";
-                                                                                       }
+                                                               if ($dnat_port) {
+                                                                       $dnat_address .= ":$dnat_port";
+
+                                                                       # Replace --dport with the translated one.
+                                                                       my @new_options = ();
+                                                                       my $skip_count = 0;
+                                                                       foreach my $option (@options) {
+                                                                               next if ($skip_count-- > 0);
+
+                                                                               if ($option eq "--dport") {
+                                                                                       push(@new_options, ("--dport", $dnat_port));
+                                                                                       $skip_count = 1;
+                                                                                       next;
                                                                                }
+
+                                                                               push(@new_options, $option);
                                                                        }
-                                                                       run("$IPTABLES -A FORWARDFW $PROT $STAG $sourcehash{$a}[0] -d $ip $fwaccessdport $time_constraints -j $$hash{$key}[0]");
-                                                                       next;
-                                                               #PROCESS SNAT RULE
-                                                               } elsif ($NAT && $NAT_MODE eq "SNAT") {
-                                                                       if ($LOG) {
-                                                                               run("$IPTABLES -t nat -A $CHAIN_NAT_SOURCE $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $DPORT $time_constraints -j LOG --log-prefix 'SNAT'");
-                                                                       }
-                                                                       run("$IPTABLES -t nat -A $CHAIN_NAT_SOURCE $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $DPORT $time_constraints -j SNAT --to-source $natip");
-                                                               }
-                                                               #PROCESS EVERY OTHER RULE (If NOT ICMP, else the rule would be applied double)
-                                                               if ($PROT ne '-p ICMP'){
-                                                                       if ($LOG && !$NAT) {
-                                                                               run("$IPTABLES -A $$hash{$key}[1] $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $DPORT $time_constraints -j LOG");
-                                                                       }
-                                                                       run("$IPTABLES -A $$hash{$key}[1] $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $DPORT $time_constraints -j $$hash{$key}[0]");
-                                                               }
-                                                               #PROCESS Prot ICMP and type = All ICMP-Types
-                                                               if ($PROT eq '-p ICMP' && $$hash{$key}[9] eq 'All ICMP-Types'){
-                                                                       if ($LOG && !$NAT) {
-                                                                               run("$IPTABLES -A $$hash{$key}[1] $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $DPORT $time_constraints -j LOG");
-                                                                       }
-                                                                       run("$IPTABLES -A $$hash{$key}[1] $PROT $STAG $sourcehash{$a}[0] $SPORT -d $targethash{$b}[0] $DPORT $time_constraints -j $$hash{$key}[0]");
+                                                                       @options = @new_options;
                                                                }
                                                        }
+
+                                                       if ($LOG) {
+                                                               run("$IPTABLES -t nat -A $CHAIN_NAT_DESTINATION @nat_options -j LOG --log-prefix 'DNAT'");
+                                                       }
+                                                       run("$IPTABLES -t nat -A $CHAIN_NAT_DESTINATION @nat_options -j DNAT --to-destination $dnat_address");
+
+                                               # Source NAT
+                                               } elsif ($NAT_MODE eq "SNAT") {
+                                                       if ($LOG) {
+                                                               run("$IPTABLES -t nat -A $CHAIN_NAT_SOURCE @options -j LOG --log-prefix 'SNAT'");
+                                                       }
+                                                       run("$IPTABLES -t nat -A $CHAIN_NAT_SOURCE @options -j SNAT --to-source $nat_address");
                                                }
                                        }
+
+                                       # Insert firewall rule.
+                                       if ($LOG && !$NAT) {
+                                               run("$IPTABLES -A $chain @options -j LOG");
+                                       }
+                                       run("$IPTABLES -A $chain @options -j $target");
                                }
                        }
                }
-               %sourcehash=();
-               %targethash=();
-               undef $fireport;
        }
 }
 
-sub get_nat_ip {
-       my $val=shift;
-       my $type=shift;
-       my $result;
-       if($val eq 'RED' || $val eq 'GREEN' || $val eq 'ORANGE' || $val eq 'BLUE'){
-               $result=$defaultNetworks{$val.'_ADDRESS'};
-       }elsif($val eq 'ALL'){
-               $result='-i '.$con;
-       }elsif($val eq 'Default IP' && $type eq "DNAT"){
-               $result='-d '.$redip;
-       }elsif($val eq 'Default IP' && $type eq "SNAT"){
-               $result=$redip;
-       }else{
-               foreach my $al (sort keys %aliases){
-                       if($val eq $al && $type eq "DNAT"){
-                               $result='-d '.$aliases{$al}{'IPT'};
-                       }elsif($val eq $al && $type eq "SNAT"){
-                               $result=$aliases{$al}{'IPT'};
-                       }
+sub get_external_interface() {
+       open(IFACE, "/var/ipfire/red/iface") or return "";
+       my $iface = <IFACE>;
+       close(IFACE);
+
+       return $iface;
+}
+
+sub get_external_address() {
+       open(ADDR, "/var/ipfire/red/local-ipaddress") or return "";
+       my $address = <ADDR>;
+       close(ADDR);
+
+       return $address;
+}
+
+sub get_alias {
+       my $id = shift;
+
+       foreach my $alias (sort keys %aliases) {
+               if ($id eq $alias) {
+                       return $aliases{$alias};
                }
        }
-       return $result;
+}
+
+sub get_nat_address {
+       my $zone = shift;
+
+       # Any static address of any zone.
+       if ($zone eq "RED" || $zone eq "GREEN" || $zone eq "ORANGE" || $zone eq "BLUE") {
+               return $defaultNetworks{$zone . "_ADDRESS"};
+
+       } elsif ($zone eq "Default IP") {
+               return &get_external_address();
+
+       } else {
+               return &get_alias($zone);
+       }
+
+       print_error("Could not find NAT address");
 }
 
 # Formats the given timestamp into the iptables format which is "hh:mm" UTC.
@@ -476,156 +446,291 @@ sub p2pblock {
        }
 }
 
-sub get_address {
-       my $base=shift; #source of checking ($configfwdfw{$key}[x] or groupkey
-       my $base2=shift;
-       my $type=shift; #src or tgt
-       my $hash;
-       if ($type eq 'src'){
-               $hash=\%sourcehash;
-       }else{
-               $hash=\%targethash;
+sub get_addresses {
+       my $hash = shift;
+       my $key  = shift;
+       my $type = shift;
+
+       my @addresses = ();
+       my $addr_type;
+       my $value;
+       my $group_name;
+
+       if ($type eq "src") {
+               $addr_type = $$hash{$key}[3];
+               $value = $$hash{$key}[4];
+
+       } elsif ($type eq "tgt") {
+               $addr_type = $$hash{$key}[5];
+               $value = $$hash{$key}[6];
+       }
+
+       if ($addr_type ~~ ["cust_grp_src", "cust_grp_tgt"]) {
+               foreach my $grp (sort {$a <=> $b} keys %customgrp) {
+                       if ($customgrp{$grp}[0] eq $value) {
+                               my @address = &get_address($customgrp{$grp}[3], $customgrp{$grp}[2], $type);
+
+                               if (@address) {
+                                       push(@addresses, @address);
+                               }
+                       }
+               }
+       } else {
+               my @address = &get_address($addr_type, $value, $type);
+
+               if (@address) {
+                       push(@addresses, @address);
+               }
        }
-       my $key = &General::findhasharraykey($hash);
-       if($base eq 'src_addr' || $base eq 'tgt_addr' ){
-               if (&General::validmac($base2)){
-                       $$hash{$key}[0] = "-m mac --mac-source $base2";
-               }else{
-                       $$hash{$key}[0] = $base2;
+
+       return @addresses;
+}
+
+sub get_address {
+       my $key   = shift;
+       my $value = shift;
+       my $type  = shift;
+
+       my @ret = ();
+
+       # If the user manually typed an address, we just check if it is a MAC
+       # address. Otherwise, we assume that it is an IP address.
+       if ($key ~~ ["src_addr", "tgt_addr"]) {
+               if (&General::validmac($value)) {
+                       push(@ret, "-m mac --mac-source $value");
+               } else {
+                       push(@ret, $value);
+               }
+
+       # If a default network interface (GREEN, BLUE, etc.) is selected, we
+       # try to get the corresponding address of the network.
+       } elsif ($key ~~ ["std_net_src", "std_net_tgt", "Standard Network"]) {
+               my $external_interface = &get_external_interface();
+
+               my $network_address = &fwlib::get_std_net_ip($value, $external_interface);
+               if ($network_address) {
+                       push(@ret, $network_address);
                }
-       }elsif($base eq 'std_net_src' || $base eq 'std_net_tgt' || $base eq 'Standard Network'){
-               $$hash{$key}[0]=&fwlib::get_std_net_ip($base2,$con);
-       }elsif($base eq 'cust_net_src' || $base eq 'cust_net_tgt' || $base eq 'Custom Network'){
-               $$hash{$key}[0]=&fwlib::get_net_ip($base2);
-       }elsif($base eq 'cust_host_src' || $base eq 'cust_host_tgt' || $base eq 'Custom Host'){
-               $$hash{$key}[0]=&fwlib::get_host_ip($base2,$type);
-       }elsif($base eq 'ovpn_net_src' || $base eq 'ovpn_net_tgt' || $base eq 'OpenVPN static network'){
-               $$hash{$key}[0]=&fwlib::get_ovpn_net_ip($base2,1);
-       }elsif($base eq 'ovpn_host_src' ||$base eq 'ovpn_host_tgt' || $base eq 'OpenVPN static host'){
-               $$hash{$key}[0]=&fwlib::get_ovpn_host_ip($base2,33);
-       }elsif($base eq 'ovpn_n2n_src' ||$base eq 'ovpn_n2n_tgt' || $base eq 'OpenVPN N-2-N'){
-               $$hash{$key}[0]=&fwlib::get_ovpn_n2n_ip($base2,11);
-       }elsif($base eq 'ipsec_net_src' || $base eq 'ipsec_net_tgt' || $base eq 'IpSec Network'){
-               $$hash{$key}[0]=&fwlib::get_ipsec_net_ip($base2,11);
-       }elsif($base eq 'ipfire_src' ){
-               if($base2 eq 'GREEN'){
-                       $$hash{$key}[0]=$defaultNetworks{'GREEN_ADDRESS'};
+
+       # Custom networks.
+       } elsif ($key ~~ ["cust_net_src", "cust_net_tgt", "Custom Network"]) {
+               my $network_address = &fwlib::get_net_ip($value);
+               if ($network_address) {
+                       push(@ret, $network_address);
                }
-               if($base2 eq 'BLUE'){
-                       $$hash{$key}[0]=$defaultNetworks{'BLUE_ADDRESS'};
+
+       # Custom hosts.
+       } elsif ($key ~~ ["cust_host_src", "cust_host_tgt", "Custom Host"]) {
+               my $host_address = &fwlib::get_host_ip($value, $type);
+               if ($host_address) {
+                       push(@ret, $host_address);
                }
-               if($base2 eq 'ORANGE'){
-                       $$hash{$key}[0]=$defaultNetworks{'ORANGE_ADDRESS'};
+
+       # OpenVPN networks.
+       } elsif ($key ~~ ["ovpn_net_src", "ovpn_net_tgt", "OpenVPN static network"]) {
+               my $network_address = &fwlib::get_ovpn_net_ip($value, 1);
+               if ($network_address) {
+                       push(@ret, $network_address);
                }
-               if($base2 eq 'ALL'){
-                       $$hash{$key}[0]='0.0.0.0/0';
+
+       # OpenVPN hosts.
+       } elsif ($key ~~ ["ovpn_host_src", "ovpn_host_tgt", "OpenVPN static host"]) {
+               my $host_address = &fwlib::get_ovpn_host_ip($value, 33);
+               if ($host_address) {
+                       push(@ret, $host_address);
                }
-               if($base2 eq 'RED' || $base2 eq 'RED1'){
-                       open(FILE, "/var/ipfire/red/local-ipaddress");
-                       $$hash{$key}[0]= <FILE>;
-                       close(FILE);
-               }else{
-                       foreach my $alias (sort keys %aliases){
-                               if ($base2 eq $alias){
-                                       $$hash{$key}[0]=$aliases{$alias}{'IPT'};
-                               }
+
+       # OpenVPN N2N.
+       } elsif ($key ~~ ["ovpn_n2n_src", "ovpn_n2n_tgt", "OpenVPN N-2-N"]) {
+               my $network_address = &fwlib::get_ovpn_n2n_ip($value, 11);
+               if ($network_address) {
+                       push(@ret, $network_address);
+               }
+
+       # IPsec networks.
+       } elsif ($key ~~ ["ipsec_net_src", "ipsec_net_tgt", "IpSec Network"]) {
+               my $network_address = &fwlib::get_ipsec_net_ip($value, 11);
+               if ($network_address) {
+                       push(@ret, $network_address);
+               }
+
+       # The firewall's own IP addresses.
+       } elsif ($key ~~ ["ipfire", "ipfire_src"]) {
+               # ALL
+               if ($value eq "ALL") {
+                       push(@ret, "0/0");
+
+               # GREEN
+               } elsif ($value eq "GREEN") {
+                       push(@ret, $defaultNetworks{"GREEN_ADDRESS"});
+
+               # BLUE
+               } elsif ($value eq "BLUE") {
+                       push(@ret, $defaultNetworks{"BLUE_ADDRESS"});
+
+               # ORANGE
+               } elsif ($value eq "ORANGE") {
+                       push(@ret, $defaultNetworks{"ORANGE_ADDRESS"});
+
+               # RED
+               } elsif ($value ~~ ["RED", "RED1"]) {
+                       my $address = &get_external_address();
+                       if ($address) {
+                               push(@ret, $address);
+                       }
+
+               # Aliases
+               } else {
+                       my %alias = &get_alias($value);
+                       if (%alias) {
+                               push(@ret, $alias{"IPT"});
                        }
                }
+
+       # If nothing was selected, we assume "any".
+       } else {
+               push(@ret, "0/0");
        }
+
+       return @ret;
 }
 
-sub get_prot {
-       my $hash=shift;
-       my $key=shift;
-       #check AH,GRE,ESP or ICMP
-       if ($$hash{$key}[7] ne 'ON' && $$hash{$key}[11] ne 'ON'){
-               return "$$hash{$key}[8]";
-       }
-       if ($$hash{$key}[7] eq 'ON' || $$hash{$key}[11] eq 'ON'){
-               #check if servicegroup or service
-               if($$hash{$key}[14] eq 'cust_srv'){
-                       return &fwlib::get_srv_prot($$hash{$key}[15]);
-               }elsif($$hash{$key}[14] eq 'cust_srvgrp'){
-                       return &fwlib::get_srvgrp_prot($$hash{$key}[15]);
-               }elsif (($$hash{$key}[10] ne '' || $$hash{$key}[15] ne '') && $$hash{$key}[8] eq ''){ #when ports are used and prot set to "all"
-                       return "TCP,UDP";
-               }elsif (($$hash{$key}[10] ne '' || $$hash{$key}[15] ne '') && ($$hash{$key}[8] eq 'TCP' || $$hash{$key}[8] eq 'UDP')){ #when ports are used and prot set to "tcp" or "udp"
-                       return "$$hash{$key}[8]";
-               }elsif (($$hash{$key}[10] eq '' && $$hash{$key}[15] eq '') && $$hash{$key}[8] ne 'ICMP'){ #when ports are NOT used and prot NOT set to "ICMP"
-                       return "$$hash{$key}[8]";
-               }else{
-                       return "$$hash{$key}[8]";
+sub get_protocols {
+       my $hash = shift;
+       my $key = shift;
+
+       my $uses_source_ports = ($$hash{$key}[7] eq "ON");
+       my $uses_services = ($$hash{$key}[11] eq "ON");
+
+       my @protocols = ();
+
+       # Rules which don't have source ports or services (like ICMP, ESP, ...).
+       if (!$uses_source_ports && !$uses_services) {
+               push(@protocols, $$hash{$key}[8]);
+
+       # Rules which either use ports or services.
+       } elsif ($uses_source_ports || $uses_services) {
+               # Check if service group or service
+               if ($$hash{$key}[14] eq 'cust_srv') {
+                       push(@protocols, &fwlib::get_srv_prot($$hash{$key}[15]));
+
+               } elsif($$hash{$key}[14] eq 'cust_srvgrp'){
+                       my $protos = &fwlib::get_srvgrp_prot($$hash{$key}[15]);
+                       push(@protocols, split(",", $protos));
+
+               } else {
+                       # Fetch the protocol for this rule.
+                       my $protocol = lc($$hash{$key}[8]);
+
+                       # Fetch source and destination ports for this rule.
+                       my $source_ports = $$hash{$key}[10];
+                       my $destination_ports = $$hash{$key}[15];
+
+                       # Check if ports are set for protocols which do not support ports.
+                       if (!($protocol ~~ @PROTOCOLS_WITH_PORTS) && ($source_ports || $destination_ports)) {
+                               print_error("$protocol does not support ports");
+                               return ();
+                       }
+
+                       push(@protocols, $protocol);
                }
        }
-       #DNAT
-       if ($SRC_TGT eq '' && $$hash{$key}[31] eq 'dnat' && $$hash{$key}[11] eq '' && $$hash{$key}[12] ne ''){
-               return "$$hash{$key}[8]";
+
+       # Remove all empty elements
+       @protocols = map { $_ ? $_ : () } @protocols;
+
+       # If no protocol has been defined, we assume "all".
+       if (!@protocols) {
+               push(@protocols, "all");
        }
+
+       # Make all protocol names lowercase.
+       @protocols = map { lc } @protocols;
+
+       return @protocols;
 }
 
-sub get_port {
-       my $hash=shift;
-       my $key=shift;
-       my $prot=shift;
-       #Get manual defined Ports from SOURCE
-       if ($$hash{$key}[7] eq 'ON' && $SRC_TGT eq 'SRC'){
-               if ($$hash{$key}[10] ne ''){
-                       $$hash{$key}[10] =~ s/\|/,/g;
-                       if(index($$hash{$key}[10],",") > 0){
-                               return "-m multiport --sport $$hash{$key}[10] ";
-                       }else{
-                               if($$hash{$key}[28] ne 'ON' || ($$hash{$key}[28] eq 'ON' && $$hash{$key}[31] eq 'snat') ||($$hash{$key}[28] eq 'ON' && $$hash{$key}[31] eq 'dnat')  ){
-                                       return "--sport $$hash{$key}[10] ";
-                               }else{
-                                       return ":$$hash{$key}[10]";
-                               }
-                       }
+sub get_protocol_options {
+       my $hash = shift;
+       my $key  = shift;
+       my $protocol = shift;
+       my @options = ();
+
+       # Process source ports.
+       my $use_src_ports = ($$hash{$key}[7] eq "ON");
+       my $src_ports     = $$hash{$key}[10];
+
+       if ($use_src_ports && $src_ports) {
+               push(@options, &format_ports($src_ports, "src"));
+       }
+
+       # Process destination ports.
+       my $use_dst_ports  = ($$hash{$key}[11] eq "ON");
+       my $use_dnat       = (($$hash{$key}[28] eq "ON") && ($$hash{$key}[31] eq "dnat"));
+
+       if ($use_dst_ports) {
+               my $dst_ports_mode = $$hash{$key}[14];
+               my $dst_ports      = $$hash{$key}[15];
+               if ($use_dnat && $$hash{$key}[30]) {
+                       $dst_ports = $$hash{$key}[30];
                }
-               #Get manual ports from TARGET
-       }elsif($$hash{$key}[11] eq 'ON' && $SRC_TGT eq ''){
-               if($$hash{$key}[14] eq 'TGT_PORT'){
-                       if ($$hash{$key}[15] ne ''){
-                               $$hash{$key}[15] =~ s/\|/,/g;
-                               if(index($$hash{$key}[15],",") > 0){
-                                       return "-m multiport --dport $$hash{$key}[15] ";
-                               }else{
-                                       if($$hash{$key}[28] ne 'ON' || ($$hash{$key}[28] eq 'ON' && $$hash{$key}[31] eq 'snat') ){
-                                               return "--dport $$hash{$key}[15] ";
-                                        }else{
-                                                $$hash{$key}[15] =~ s/\:/-/g;
-                                                return ":$$hash{$key}[15]";
-                                        }
-                               }
-                       }
-               #Get ports defined in custom Service (firewall-groups)
-               }elsif($$hash{$key}[14] eq 'cust_srv'){
-                       if ($prot ne 'ICMP'){
-                               if($$hash{$key}[31] eq 'dnat' && $$hash{$key}[28] eq 'ON'){
-                                       my $ports =&fwlib::get_srv_port($$hash{$key}[15],1,$prot);
-                                       $ports =~ s/\:/-/g;
-                                       return ":".$ports
-                               }else{
-                                       return "--dport ".&fwlib::get_srv_port($$hash{$key}[15],1,$prot);
-                               }
-                       }elsif($prot eq 'ICMP' && $$hash{$key}[11] eq 'ON'){        #When PROT is ICMP and "use targetport is checked, this is an icmp-service
-                               return "--icmp-type ".&fwlib::get_srv_port($$hash{$key}[15],3,$prot);
-                       }
-               #Get ports from services which are used in custom servicegroups (firewall-groups)
-               }elsif($$hash{$key}[14] eq 'cust_srvgrp'){
-                       if      ($prot ne 'ICMP'){
-                               return &fwlib::get_srvgrp_port($$hash{$key}[15],$prot);
-                       }
-                       elsif($prot eq 'ICMP'){
-                               return &fwlib::get_srvgrp_port($$hash{$key}[15],$prot);
+
+               if (($dst_ports_mode eq "TGT_PORT") && $dst_ports) {
+                       push(@options, &format_ports($dst_ports, "dst"));
+
+               } elsif ($dst_ports_mode eq "cust_srv") {
+                       if ($protocol eq "ICMP") {
+                               push(@options, ("--icmp-type", &fwlib::get_srv_port($dst_ports, 3, "ICMP")));
+                       } else {
+                               $dst_ports = &fwlib::get_srv_port($dst_ports, 1, uc($protocol));
+                               push(@options, &format_ports($dst_ports, "dst"));
                        }
+
+               } elsif ($dst_ports_mode eq "cust_srvgrp") {
+                       push(@options, &fwlib::get_srvgrp_port($dst_ports, uc($protocol)));
                }
        }
-       #CHECK ICMP
-       if ($$hash{$key}[7] ne 'ON' && $$hash{$key}[11] ne 'ON' && $SRC_TGT eq ''){
-               if($$hash{$key}[9] ne '' && $$hash{$key}[9] ne 'All ICMP-Types'){
-                       return "--icmp-type $$hash{$key}[9] ";
-               }elsif($$hash{$key}[9] eq 'All ICMP-Types'){
-                       return;
+
+       # Check if a single ICMP type is selected.
+       if (!$use_src_ports && !$use_dst_ports && $protocol eq "icmp") {
+               my $icmp_type = $$hash{$key}[9];
+
+               if (($icmp_type ne "All ICMP-Types") && $icmp_type) {
+                       push(@options, ("--icmp-type", $icmp_type));
                }
        }
+
+       return @options;
+}
+
+sub format_ports {
+       my $ports = shift;
+       my $type = shift;
+
+       my $arg;
+       if ($type eq "src") {
+               $arg = "--sport";
+       } elsif ($type eq "dst") {
+               $arg = "--dport";
+       }
+
+       my @options = ();
+
+       if ($ports =~ /\|/) {
+               $ports =~ s/\|/,/g;
+               push(@options, ("-m", "multiport"));
+       }
+
+       push(@options, ($arg, $ports));
+
+       return @options;
+}
+
+sub get_dnat_target_port {
+       my $hash = shift;
+       my $key  = shift;
+
+       if ($$hash{$key}[14] eq "TGT_PORT") {
+               return $$hash{$key}[15];
+       }
 }