Merge remote-tracking branch 'ms/timezone-transision' into next

[people/teissler/ipfire-2.x.git] / langs / en / cgi-bin / en.pl

diff --git a/langs/en/cgi-bin/en.pl b/langs/en/cgi-bin/en.pl
index f04a17e7642bd4409b3a92c610832c0b27878f0b..173b8f05361f0c7f70b48b6d9858ce16c0991f88 100644 (file)
--- a/langs/en/cgi-bin/en.pl
+++ b/langs/en/cgi-bin/en.pl
@@ -959,6 +959,8 @@
 'fwdfw delete' => 'Delete',
 'fwdfw dnat' => 'Destination NAT (Port forwarding)',
 'fwdfw dnat error' => 'You have to select a single host for DNAT. Groups or networks are not allowed.',
+'fwdfw dnat extport' => 'The external port has to be empty when using Source NAT rules.',
+'fwdfw dnat nochoice' => 'Please pick Source NAT or Destination NAT from the NAT section.',
 'fwdfw dnat porterr' => 'You have to select a single port or portrange (tcp/udp) for NAT',
 'fwdfw dnat porterr2' => 'Cannot use external port (NAT) when no destination port is defined.',
 'fwdfw edit' => 'Edit',
@@ -983,6 +985,7 @@
 'fwdfw from' => 'From:',
 'fwdfw hint ip1' => 'The last generated rule may never match, because source and destination subnets may overlap.',
 'fwdfw hint ip2' => 'Please double-check if this rule makes sense: ',
+'fwdfw hint mac' => 'The destination group contains MAC addresses, which will be skipped during rule creation.',
 'fwdfw iface' => 'Interface',
 'fwdfw ipsec network' => 'IPsec networks:',
 'fwdfw log' => 'Log',
@@ -1012,7 +1015,7 @@
 'fwdfw sourceip' => 'Source address (MAC/IP address or network):',
 'fwdfw std network' => 'Standard networks:',
 'fwdfw target' => 'Destination',
-'fwdfw targetip' => 'Destination address (MAC/IP address or network):',
+'fwdfw targetip' => 'Destination address (IP address or network):',
 'fwdfw till' => 'Until:',
 'fwdfw time' => 'Time Constraints',
 'fwdfw timeframe' => 'Use time constraints',
@@ -1298,7 +1301,9 @@
 'ipfire side is invalid' => 'IPFire side is invalid.',
 'ipfires hostname' => 'IPFire\'s Hostname',
 'ipinfo' => 'IP info',
+'ipsec' => 'IPsec',
 'ipsec network' => 'IPsec network',
+'ipsec no connections' => 'No active IPsec connections',
 'iptable rules' => 'IPTable rules',
 'iptmangles' => 'IPTable Mangles',
 'iptnats' => 'IPTable Network Address Translation',
@@ -1625,6 +1630,7 @@
 'ovpn errmsg green already pushed' => 'Route for green network is always set',
 'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask',
 'ovpn log' => 'OVPN-Log',
+'ovpn mgmt in root range' => 'A port number of 1024 or higher is required.',
 'ovpn mtu-disc' => 'Path MTU Discovery',
 'ovpn mtu-disc and mtu not 1500' => 'Path MTU Discovery requires a MTU of 1500.',
 'ovpn mtu-disc maybe' => 'Optionally',
@@ -1632,9 +1638,11 @@
 'ovpn mtu-disc off' => 'Disabled',
 'ovpn mtu-disc with mssfix or fragment' => 'Path MTU Discovery cannot be used with mssfix or fragment.',
 'ovpn mtu-disc yes' => 'Forced',
+'ovpn no connections' => 'No active OpenVPN connections',
 'ovpn on blue' => 'OpenVPN on BLUE',
 'ovpn on orange' => 'OpenVPN on ORANGE',
 'ovpn on red' => 'OpenVPN on RED',
+'ovpn port in root range' => 'A port number of 1024 or higher is required.',
 'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24',
 'ovpn routes push options' => 'Route push options',
 'ovpn server status' => 'Current OpenVPN server status:',
@@ -1657,7 +1665,7 @@
 'ovpn_processprioVH' => 'Very high',
 'ovpnstatus log' => 'OVPN-Status-Log',
 'ovpnsys log' => 'OVPN-System-Log',
-'p2p block' => 'P2P block',
+'p2p block' => 'P2P networks',
 'p2p block save notice' => 'Please reload the firewall ruleset in order to apply your changes.',
 'package failed to install' => 'Package failed to install.',
 'pagerefresh' => 'Page is beeing refreshed, please wait.',