Forward Firewall: added new line at bottom of all ruletables with the "final rule"

[people/teissler/ipfire-2.x.git] / langs / en / cgi-bin / en.pl

diff --git a/langs/en/cgi-bin/en.pl b/langs/en/cgi-bin/en.pl
index d66c202c5275c14514395b1e8c6cfba57a30dd36..37c3b12572cfc0593cad4b57edfa3f82ff0732f1 100644 (file)
--- a/langs/en/cgi-bin/en.pl
+++ b/langs/en/cgi-bin/en.pl
@@ -949,6 +949,7 @@
 'fwdfw err tgt_grp'            => 'Target servicegroup is empty',
 'fwdfw err time'               => 'You have to define at least one day.',
 'fwdfw from'                   => 'From:',
 'fwdfw err tgt_grp'            => 'Target servicegroup is empty',
 'fwdfw err time'               => 'You have to define at least one day.',
 'fwdfw from'                   => 'From:',

+'fwdfw final_rule'             => 'Last rule: ',

 'fwdfw hint ip1'               => 'The last generated rule may never be activated because source and target probably are in same subnet.',
 'fwdfw hint ip2'               => 'Please doublecheck if this rule makes sense: ',
 'fwdfw ipsec network'  => 'IpSec networks:',
 'fwdfw hint ip1'               => 'The last generated rule may never be activated because source and target probably are in same subnet.',
 'fwdfw hint ip2'               => 'Please doublecheck if this rule makes sense: ',
 'fwdfw ipsec network'  => 'IpSec networks:',


@@ -956,6 +957,8 @@
 'fwdfw man port'               => 'Port(s) manual:',
 'fwdfw moveup'                 => 'Move up',
 'fwdfw movedown'               => 'Move down',
 'fwdfw man port'               => 'Port(s) manual:',
 'fwdfw moveup'                 => 'Move up',
 'fwdfw movedown'               => 'Move down',

+'fwdfw MODE1'                  => 'Drop all packets',
+'fwdfw MODE2'                  => 'Accept all packets',

 'fwdfw p2p txt'                        => 'Here you can admit or deny or allow single p2p networks. Just define which networks are allowed or denied and the system takes care of the rules depending on the firewall mode. An allowed p2p network may use a lot of bandwith.',
 'fwdfw pol allow'              => 'Allowed',
 'fwdfw pol block'              => 'Blocked',
 'fwdfw p2p txt'                        => 'Here you can admit or deny or allow single p2p networks. Just define which networks are allowed or denied and the system takes care of the rules depending on the firewall mode. An allowed p2p network may use a lot of bandwith.',
 'fwdfw pol allow'              => 'Allowed',
 'fwdfw pol block'              => 'Blocked',