'Choose Rule' => 'Choose <u>one</u> of the following rules.',
'Class' => 'Class',
'Class was deleted' => 'with potential subclasses was deleted',
+'Client status and controlc' => 'Client status and control:',
'ConnSched action' => 'Action:',
'ConnSched add action' => 'Add action',
'ConnSched change profile title' => 'Change to profile:',
'ConnSched days' => 'Days:',
+'ConnSched dial' => 'Connect',
'ConnSched down' => 'Down',
+'ConnSched hangup' => 'Disconnect',
'ConnSched ipsecstart' => 'IPSec (re)start',
'ConnSched ipsecstop' => 'IPSec stop',
+'ConnSched reboot' => 'Reboot',
'ConnSched reconnect' => 'Reconnect',
'ConnSched scheduled actions' => 'Scheduled actions',
'ConnSched scheduler' => 'Scheduler',
'ConnSched select profile' => 'Select profile',
+'ConnSched shutdown' => 'Shutdown',
'ConnSched time' => 'Time:',
'ConnSched up' => 'Up',
'ConnSched weekdays' => 'Days of the week:',
'Level7 Rule' => 'Level7-Rule',
'Level7 rule' => 'Level7 rule',
'Local VPN IP' => 'Internal Network (GREEN):',
+'MB read' => 'MB read',
+'MB written' => 'MB written',
'MTU' => 'MTU size:',
'Number of IPs for the pie chart' => 'Number of IPs for the pie chart',
'Number of Ports for the pie chart' => 'Number of ports for the pie chart',
'behind a proxy' => 'Behind a proxy:',
'bewan adsl pci st' => 'TO BE REMOVED',
'bewan adsl usb' => 'TO BE REMOVED',
-'bit' => 'bit',
+'bit' => 'Bit',
'bitrate' => 'Bitrate',
'bleeding rules' => 'Bleeding Edge Snort Rules',
'blue' => 'BLUE',
'cant change certificates' => 'Can\'t change certificates.',
'cant enable xtaccess' => 'The associated port forwarding rule is disabled, therefore you cannot enable external access for this rule.',
'cant start openssl' => 'Can\'t start OpenSSL',
+'capabilities' => 'Capabilities',
'caps all' => 'ALL',
'capsclosed' => 'DISCONNECTED',
'capsinactive' => 'INACTIVE',
'ccd err invalidnet' => 'Invalid IP address. Format: 192.168.0.0/24 or 192.168.0.0/255.255.255.0.',
'ccd err iroute' => 'Network address for route is invalid.',
'ccd err irouteexist' => 'This route is already in use.',
-'ccd err isipsecnet' => 'The given subnet address already used by an IPsec network.',
-'ccd err isovpnnet' => 'Subnet address already in use for OpenVPN Server.',
+'ccd err isipsecnet' => 'The given subnet address is already used by an IPsec network.',
+'ccd err isipsecrw' => 'The given subnet address is already used by the IPsec rw network.',
+'ccd err isovpnn2n' => 'The subnet address is already in use for an OpenVPN net-to-net connection.',
+'ccd err isovpnnet' => 'The subnet address is already in use for the OpenVPN server.',
'ccd err issubnet' => 'Subnet address already in use.',
'ccd err name' => 'Please choose a name.',
'ccd err nameexist' => 'Name already exists.',
'could not open installed updates file' => 'Could not open installed updates file',
'could not open update information file' => 'Could not open update information file. The update file is corrupt.',
'could not retrieve common name from certificate' => 'Could not retrieve common name from certificate.',
+'count' => 'Count',
+'countries' => 'Countries',
'country' => 'Country',
+'country codes and flags' => 'Country Codes and Flags:',
+'countrycode' => 'Code',
'cpu frequency per' => 'CPU frequency per',
'cpu idle usage' => 'Idle CPU Usage',
'cpu interrupt usage' => 'Interrupt CPU Usage',
'destination port numbers' => 'Destination port must be a valid port number or port range.',
'destination port overlaps' => 'Destination port range overlaps an existing port range.',
'detail level' => 'Detail level',
+'details' => 'Details',
'device' => 'Device',
'devices on blue' => 'Devices on BLUE',
'dh' => 'Diffie-Hellman Key',
'dh key warn' => 'Keys with 1024 and 2048 bit takes up to several minutes, 3072 and 4096 bit might needs several hours. Please be patient.',
-'dh name is invalid' => 'Name ist ung\9fltig, bitte "dh1024.pem" verwenden.',
+'dh name is invalid' => 'Name is invalid, please use "dh1024.pem".',
'dhcp advopt add' => 'Add a DHCP option',
'dhcp advopt added' => 'DHCP option added',
'dhcp advopt blank value' => 'DHCP Option value cannot be empty.',
'dmz pinhole rule added' => 'DMZ pinhole rule added; restarting DMZ pinhole',
'dmz pinhole rule removed' => 'DMZ pinhole rule removed; restarting DMZ pinhole',
'dmzpinholes for same net not necessary' => 'DMZ Pinholes are not necessary for same net. Select different source or destination net.',
-'dnat address' => 'External IP address',
+'dnat address' => 'Firewall Interface',
'dns address deleted' => 'Successfully deleted!',
'dns address deleted txt' => 'The DNS-Server addresses have been successfully deleted.<br />You have to reboot or reconnect that the changes have effect!',
'dns address done' => 'The DNS-Server address settings are going to be saved.',
'dns saved' => 'Successfully saved!',
'dns saved txt' => 'The two entered DNS server addresses have been saved successfully.<br />You have to reboot or reconnect that the changes have effect!',
'dns server' => 'DNS Server',
+'dns servers' => 'DNS Servers',
'dns title' => 'Domain Name System',
'dnsforward' => 'DNS Forwarding',
'dnsforward add a new entry' => 'Add a new entry',
'done' => 'Do it',
'dos charset' => 'DOS Charset',
'down and up speed' => 'Enter your Down- and Uplink-Speed <br /> and then press <i>Save</i>.',
+'downlink' => 'Downlink',
'downlink speed' => 'Downlink speed (kbit/sec)',
'downlink std class' => 'downlink standard class',
'download' => 'download',
'enter ack class' => 'Enter the ACK- Class <br /> and then press <i>Save</i>.',
'enter data' => 'Enter your settings <br /> and then press <i>Save</i>.',
'entropy' => 'Entropy',
+'entropy graphs' => 'Entropy Graphs',
'err bk 1' => 'Error creating archive',
'err bk 10 password' => 'Error with backup password',
'err bk 2 key' => 'Error creating key file',
'firewall log' => 'Firewall log',
'firewall log viewer' => 'Firewall Log Viewer',
'firewall logs' => 'Firewall Logs',
+'firewall logs country' => 'Fw-Loggraphs (Country)',
'firewall logs ip' => 'Fw-Loggraphs (IP)',
'firewall logs port' => 'Fw-Loggraphs (Port)',
'firewall rules' => 'Firewall Rules',
'firewallhits' => 'firewallhits',
'firmware' => 'Firmware',
'firmware upload' => 'Upload Firmware/Drivers',
+'first' => 'First',
'fixed ip lease added' => 'Fixed IP lease added',
'fixed ip lease modified' => 'Fixed IP lease modified',
'fixed ip lease removed' => 'Fixed IP lease removed',
+'flag' => 'Flag',
'force update' => 'Force update',
'force user' => 'force all new file to user',
'forward firewall' => 'Firewall',
'fwdfw log' => 'Log',
'fwdfw log rule' => 'Log rule',
'fwdfw man port' => 'Port(s):',
+'fwdfw many' => 'Many',
'fwdfw menu' => 'Firewall',
'fwdfw movedown' => 'Move down',
'fwdfw moveup' => 'Move up',
'fwdfw use srcport' => 'Source port:',
'fwdfw use srv' => 'Destination port:',
'fwdfw useless rule' => 'This rule is useless.',
+'fwdfw warn1' => 'This might lead to firewallrules which are applied to networks for which they are not intended to be.',
'fwdfw wd_fri' => 'Fri',
'fwdfw wd_mon' => 'Mon',
'fwdfw wd_sat' => 'Sat',
'harddisk temperature' => 'Harddisk Temperature',
'harddisk temperature graphs' => 'HDD Graphs',
'hardware graphs' => 'Hardware Graphs',
+'hardware support' => 'Hardware Support',
'hdd temperature in' => 'Harddisk temperature in',
'help' => 'Help',
'high' => 'High',
'ike integrity' => 'IKE Integrity:',
'ike lifetime' => 'IKE Lifetime:',
'ike lifetime should be between 1 and 8 hours' => 'IKE lifetime should be between 1 and 8 hours.',
+'imei' => 'IMEI',
'import' => 'Import',
'importkey' => 'Import PSK',
+'imsi' => 'IMSI',
'in' => 'In',
'inactive' => 'inactive',
'include logfiles' => 'Include logfiles',
'incoming' => 'incoming',
+'incoming firewall access' => 'Incoming Firewall Access',
'incoming traffic in bytes per second' => 'Incoming Traffic',
'incorrect password' => 'Incorrect password',
'info' => 'Info',
'lan' => 'LAN',
'lang' => 'en',
'languagepurpose' => 'Select the language you wish IPFire to display in:',
+'last' => 'Last',
'last activity' => 'Last Activity',
'lateprompting' => 'Lateprompting',
'lease expires' => 'Lease expires',
'missing dat' => 'Encrypted archive not found',
'missing gz' => 'Unencrypted archive not found',
'mode' => 'Mode',
+'model' => 'Model',
'modem' => 'Modem',
'modem configuration' => 'Modem configuration',
+'modem hardware details' => 'Modem Hardware',
+'modem information' => 'Modem Information',
+'modem network bit error rate' => 'Bit Error Rate',
+'modem network information' => 'Network Information',
+'modem network mode' => 'Network Mode',
+'modem network operator' => 'Network Operator',
+'modem network registration' => 'Network Registration',
+'modem network signal quality' => 'Signal Quality',
+'modem no connection' => 'No Connection',
+'modem no connection message' => 'No connection to the modem could be established.',
'modem on com1' => 'Modem on COM1',
'modem on com2' => 'Modem on COM2',
'modem on com3' => 'Modem on COM3',
'modem on com4' => 'Modem on COM4',
'modem on com5' => 'Modem on COM5',
'modem settings have errors' => 'Modem settings have errors',
+'modem sim information' => 'SIM Information',
'modem speaker on' => 'Modem speaker on:',
+'modem status' => 'Modem Status',
'modify' => 'Modify',
'modulation' => 'Modulation',
'monday' => 'Monday',
'network traffic graphs others' => 'Network (others)',
'network updated' => 'Custom Network updated',
'networks settings' => 'Firewall - Network settings',
-'never' => 'Never',
'new optionsfw later' => 'Some options need a reboot to take effect',
'new optionsfw must boot' => 'You must reboot your IPFire',
'newer' => 'Newer',
'no eciadsl synch.bin file' => 'No ECI ADSL synch.bin file. Please upload.',
'no filter pass' => 'Enter the standard class for non-filtered packets.',
'no fritzdsl driver' => 'No Fritz!DSL driver. Please upload.',
+'no hardware random number generator' => 'This system has no source for entropy.',
'no information available' => 'No information available.',
'no log selected' => 'No log selected',
'no modem selected' => 'No modem selected',
'out' => 'Out',
'outgoing' => 'outgoing',
'outgoing firewall' => 'Outgoing Firewall',
+'outgoing firewall access' => 'Outgoing Firewall Access',
'outgoing firewall add ip group' => 'Add IP Address Group',
'outgoing firewall add mac group' => 'Add MAC Address Group',
'outgoing firewall edit ip group' => 'Edit IP Address Group',
'ovpn dh' => 'Diffie-Hellman key lenght',
'ovpn dh name' => 'Diffie-Hellman key name',
'ovpn dl' => 'OVPN-Config Download',
-'ovpn engines' => 'Crypto engine',
'ovpn errmsg green already pushed' => 'Route for green network is always set',
'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask',
'ovpn generating the root and host certificates' => 'Generating the root and host certifictae can take a long time.',
'ovpn on orange' => 'OpenVPN on ORANGE:',
'ovpn on red' => 'OpenVPN on RED:',
'ovpn port in root range' => 'A port number of 1024 or higher is required.',
-'ovpn reneg sec' => 'Session key lifetime:',
'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24',
'ovpn routes push options' => 'Route push options',
'ovpn server status' => 'Current OpenVPN server status:',
'snort hits' => 'Total of number of Intrusion rules activated for',
'snort working' => 'Snort is working ... Please wait until all operations have completed successfully.',
'socket options' => 'Socket options',
+'software version' => 'Software Version',
'sort ascending' => 'Sort ascending',
'sort descending' => 'Sort descending',
'sound' => 'Sound',
'swap usage per' => 'Swap usage per',
'system' => 'System',
'system graphs' => 'System Graphs',
+'system has hwrng' => 'This system has got a hardware random number generator.',
+'system has rdrand' => 'This system has got support for Intel(R) RDRAND.',
'system information' => 'System Information',
'system log viewer' => 'System Log Viewer',
'system logs' => 'System Logs',
'updxlrtr weekly' => 'weekly',
'updxlrtr year' => 'one year',
'upgrade' => 'upgrade',
+'uplink' => 'Uplink',
'uplink speed' => 'Uplink speed (kbit/sec)',
'uplink std class' => 'uplink standard class',
'upload' => 'Upload',
'valid root certificate already exists' => 'A valid root certificate already exists.',
'valid till' => 'Valid till',
'vci number' => 'VCI number:',
+'vendor' => 'Vendor',
'view log' => 'view log',
'virtual address' => 'Virtual Address',
'virtual private networking' => 'Virtual Private Networking',
'vpn aggrmode' => 'IKE aggressive mode allowed. Avoid if possible (preshared key is transmitted in clear text)!',
'vpn altname syntax' => 'SubjectAltName is a comma separated list of e-mail, dns, uri, rid and ip objects.<br />email:an email address. Syntax email:copy takes the email field from the cert to be used.<br />DNS:a valid domain name.<br />URI:any valid uri.<br />RID:registered object identifier.<br />IP:an IP address.<br />Note:charset is limited and case is significant.<br />Example:<br /><b>e-mail:</b>ipfire@foo.org<b>,email:</b>copy<b>,DNS:</b>www.ipfire.org<b>,IP:</b>127.0.0.1<b>,URI:</b>http://url/to/something',
'vpn auth-dn' => 'Peer is identified by either IPV4_ADDR, FQDN, USER_FQDN or DER_ASN1_DN string in remote ID field',
+'vpn configuration main' => 'VPN Configuration',
'vpn delayed start' => 'Delay before launching VPN (seconds)',
'vpn delayed start help' => 'If required, this delay can be used to allow dynamic DNS updates to propagate properly. 60 is a common value when RED is a dynamic IP.',
'vpn incompatible use of defaultroute' => 'hostname=%defaultroute not allowed',
projects / people / teissler / ipfire-2.x.git / blobdiff