. /etc/sysconfig/rc
. ${rc_functions}
+. /etc/init.d/networking/functions.network
#Define some defaults
INET_VLAN=7
fi
fi
-PIDFILE="/var/run/dhcpcd-${DEVICE}.pid"
-LEASEINFO="/var/ipfire/dhcpc/dhcpcd-${DEVICE}.info"
-DHCP_START=" "
-DHCP_STOP="-k "
-
case "${1}" in
start)
if [ "${DEVICE}" != "${GREEN_DEV}" ] && [ "${DEVICE}" != "" ]; then
echo -n "${DEVICE}" > /var/ipfire/red/iface
echo -n "${ADDRESS}" > /var/ipfire/red/local-ipaddress
echo -n "${GATEWAY}" > /var/ipfire/red/remote-ipaddress
- grep -v "gateway" /etc/hosts > /tmp/hosts
- echo "$GATEWAY gateway" >> /tmp/hosts
+ grep -v -E "\<gateway\>" /etc/hosts > /tmp/hosts
+ echo "$GATEWAY gateway" >> /tmp/hosts
mv /tmp/hosts /etc/hosts
echo -n "${DNS1}" > /var/ipfire/red/dns1
echo -n "${DNS2}" > /var/ipfire/red/dns2
/usr/local/bin/setaliases
elif [ "${TYPE}" == "DHCP" ]; then
+ # Add firewall rules to allow comunication with the dhcp server on red.
+ iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
+ iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
- if [ -e $LEASEINFO ]; then
- boot_mesg -n "Stopping dhcpcd on the ${DEVICE} interface..."
- . $LEASEINFO
- if [ "$dhcp_lease_time" = "4294967295" ]; then
- # do nothing, just echo ok
- echo ""
- echo_ok
- else
- if [ -n "$DHCP_STOP" ]; then
- /sbin/dhcpcd ${DEVICE} $DHCP_STOP &> /dev/null
- RET="$?"
- if [ "$RET" -eq 0 ]; then
- echo ""
- echo_ok
- elif [ "$RET" -eq 1 ]; then
- boot_mesg "dhcpcd not running!" ${WARNING}
- echo_warning
- else
- echo ""
- echo_failure
- fi
- else
- echo ""
- killproc dhcpcd
- fi
- fi
- fi
-
- boot_mesg -n "Starting dhcpcd on the ${DEVICE} interface..."
echo -n "${DEVICE}" > /var/ipfire/red/iface
+ # Check if the wlan-client is used on red.
+ # To determine this we check if a wpa_supplicant is running.
+ pid="$(pidof wpa_supplicant)"
+
+ if [ -z "${pid}" ]; then
+ # No wpa_supplicant is running. So it's save to start dhcpcd.
+ dhcpcd_start "${DEVICE}"
+ fi
+
## Create & Enable vnstat
/usr/bin/vnstat -u -i ${DEVICE} -r --enable --force > /dev/null 2>&1
- # Test to see if there is a stale pid file
- if [ -f "$PIDFILE" ]; then
- ps `cat "$PIDFILE"` | grep dhcpcd > /dev/null
- if [ $? != 0 ]; then
- rm -f /var/run/dhcpcd-${DEVICE}.pid > /dev/null
- else
- boot_mesg "dhcpcd already running!" ${WARNING}
- echo_warning
- exit 2
- fi
- fi
-
- iptables -A REDINPUT -p tcp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
- iptables -A REDINPUT -p udp --source-port 67 --destination-port 68 -i ${DEVICE} -j ACCEPT
-
- if [ -n "${RED_DHCP_HOSTNAME}" ]; then
- DHCP_START+="-h ${RED_DHCP_HOSTNAME} "
- fi
-
- /sbin/dhcpcd ${DEVICE} ${DHCP_START} >/dev/null 2>&1
- RET="$?"
-
- if [ "$RET" = "0" ]; then
- . /var/ipfire/dhcpc/dhcpcd-${DEVICE}.info
- echo ""
- echo_ok
- boot_mesg " DHCP Assigned Settings for ${DEVICE}:"
- boot_mesg_flush
- boot_mesg " IP Address: $ip_address"
- boot_mesg_flush
- if [ -n "${RED_DHCP_HOSTNAME}" ]; then
- boot_mesg " Hostname: $RED_DHCP_HOSTNAME"
- boot_mesg_flush
- fi
- boot_mesg " Subnet Mask: $subnet_mask"
- boot_mesg_flush
- boot_mesg " Default Gateway: $routers"
- boot_mesg_flush
- boot_mesg " DNS Server: $domain_name_servers"
- boot_mesg_flush
- else
- echo ""
- $(exit "$RET")
- evaluate_retval
- fi
-
elif [ "$TYPE" == "PPPOE" ]; then
if ( ps ax | grep -q [p]ppd ); then
boot_mesg "Createing ATM-Bridge as $PPP_NIC ..."
br2684ctl -c0 -e${ENCAP} -a0.${VPI}.${VCI} >/dev/null 2>&1 &
sleep 1
+
+ # use user-defined or green mac address for nas0
+ if [ -n "$MAC" ]; then
+ ip link set dev nas0 address ${MAC}
+ else
+ ip link set dev nas0 address $(cat /sys/class/net/green0/address)
+ fi
+
if [ "$TYPE" == "pppoeatm" ]; then
TYPE="pppoe"
fi
### Standard PPP options we always use
#
PPP_STD_OPTIONS="$PLUGOPTS $DNS defaultroute noipdefault noauth"
- PPP_STD_OPTIONS+=" default-asyncmap hide-password nodetach mtu ${MTU}"
- PPP_STD_OPTIONS+=" mru ${MRU} noaccomp nodeflate nopcomp novj novjccomp"
+ PPP_STD_OPTIONS+=" default-asyncmap hide-password nodetach"
+ PPP_STD_OPTIONS+=" noaccomp nodeflate nopcomp novj novjccomp"
PPP_STD_OPTIONS+=" nobsdcomp user ${USERNAME} lcp-echo-interval 20"
PPP_STD_OPTIONS+=" lcp-echo-failure 5 ${AUTH}"
+
+ if [ -n "${MTU}" ]; then
+ PPP_STD_OPTIONS="${PPP_STD_OPTIONS} mtu ${MTU}"
+ fi
+
+ if [ -n "${MRU}" ]; then
+ PPP_STD_OPTIONS="${PPP_STD_OPTIONS} mru ${MRU}"
+ fi
### Debugging
#
# Add a NaN value to ppp0 rrd to supress spikes at reconnect
rrdtool update $RRDLOG/collectd/localhost/interface/if_octets-ppp0.rrd \
$(date +%s):: > /dev/null 2>&1
- fi
- if [ -e $LEASEINFO ]; then
- boot_mesg -n "Stopping dhcpcd on the ${DEVICE} interface..."
- . $LEASEINFO
- if [ "$dchp_lease_time" = "4294967295" ]; then
- # do nothing, just echo ok
- echo ""
- echo_ok
- else
- if [ -n "$DHCP_STOP" ]; then
- /sbin/dhcpcd ${DEVICE} $DHCP_STOP &> /dev/null
- RET="$?"
- if [ "$RET" -eq 0 ]; then
- echo ""
- echo_ok
- elif [ "$RET" -eq 1 ]; then
- boot_mesg "dhcpcd not running!" ${WARNING}
- echo_warning
- else
- echo ""
- echo_failure
- fi
- else
- echo ""
- killproc dhcpcd
- fi
+ elif [ "$TYPE" == "DHCP" ]; then
+ # Check if the wlan-client is used on red.
+ # To determine this we check if a wpa_supplicant is running.
+ pid="$(pidof wpa_supplicant)"
+
+ if [ -z "${pid}" ]; then
+ # Stop dhcpcd.
+ dhcpcd_stop "${DEVICE}"
fi
fi