v\bvi\bis\bsi\bib\bbl\ble\be, readline uses a visible bell if one is available. If
set to a\bau\bud\bdi\bib\bbl\ble\be, readline attempts to ring the terminal's bell.
b\bbi\bin\bnd\bd-\b-t\btt\bty\by-\b-s\bsp\bpe\bec\bci\bia\bal\bl-\b-c\bch\bha\bar\brs\bs (\b(O\bOn\bn)\b)
- If set to O\bOn\bn, readline attempts to bind the control characters
- treated specially by the kernel's terminal driver to their read-
- line equivalents.
+ If set to O\bOn\bn (the default), readline attempts to bind the con-
+ trol characters that are treated specially by the kernel's ter-
+ minal driver to their readline equivalents. These override the
+ default readline bindings described here. Type stty -a at a
+ bash prompt to see your current terminal settings, including the
+ special control characters (usually c\bcc\bch\bha\bar\brs\bs).
b\bbl\bli\bin\bnk\bk-\b-m\bma\bat\btc\bch\bhi\bin\bng\bg-\b-p\bpa\bar\bre\ben\bn (\b(O\bOf\bff\bf)\b)
If set to O\bOn\bn, readline attempts to briefly move the cursor to an
opening parenthesis when a closing parenthesis is inserted.
c\bco\bol\blo\bor\bre\bed\bd-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-p\bpr\bre\bef\bfi\bix\bx (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, when listing completions, readline displays the
+ If set to O\bOn\bn, when listing completions, readline displays the
common prefix of the set of possible completions using a differ-
- ent color. The color definitions are taken from the value of
+ ent color. The color definitions are taken from the value of
the L\bLS\bS_\b_C\bCO\bOL\bLO\bOR\bRS\bS environment variable. If there is a color defini-
- tion in $\b$L\bLS\bS_\b_C\bCO\bOL\bLO\bOR\bRS\bS for the custom suffix "readline-colored-com-
- pletion-prefix", readline uses this color for the common prefix
+ tion in $\b$L\bLS\bS_\b_C\bCO\bOL\bLO\bOR\bRS\bS for the custom suffix "readline-colored-com-
+ pletion-prefix", readline uses this color for the common prefix
instead of its default.
c\bco\bol\blo\bor\bre\bed\bd-\b-s\bst\bta\bat\bts\bs (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, readline displays possible completions using dif-
- ferent colors to indicate their file type. The color defini-
- tions are taken from the value of the L\bLS\bS_\b_C\bCO\bOL\bLO\bOR\bRS\bS environment
+ If set to O\bOn\bn, readline displays possible completions using dif-
+ ferent colors to indicate their file type. The color defini-
+ tions are taken from the value of the L\bLS\bS_\b_C\bCO\bOL\bLO\bOR\bRS\bS environment
variable.
c\bco\bom\bmm\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn (\b(`\b``\b`#\b#'\b''\b')\b)
- The string that is inserted when the readline i\bin\bns\bse\ber\brt\bt-\b-c\bco\bom\bmm\bme\ben\bnt\bt
+ The string that is inserted when the readline i\bin\bns\bse\ber\brt\bt-\b-c\bco\bom\bmm\bme\ben\bnt\bt
command is executed. This command is bound to M\bM-\b-#\b# in emacs mode
and to #\b# in vi command mode.
c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-d\bdi\bis\bsp\bpl\bla\bay\by-\b-w\bwi\bid\bdt\bth\bh (\b(-\b-1\b1)\b)
- The number of screen columns used to display possible matches
- when performing completion. The value is ignored if it is less
- than 0 or greater than the terminal screen width. A value of 0
- will cause matches to be displayed one per line. The default
+ The number of screen columns used to display possible matches
+ when performing completion. The value is ignored if it is less
+ than 0 or greater than the terminal screen width. A value of 0
+ will cause matches to be displayed one per line. The default
value is -1.
c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-i\big\bgn\bno\bor\bre\be-\b-c\bca\bas\bse\be (\b(O\bOf\bff\bf)\b)
If set to O\bOn\bn, readline performs filename matching and completion
in a case-insensitive fashion.
c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-m\bma\bap\bp-\b-c\bca\bas\bse\be (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, and c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-i\big\bgn\bno\bor\bre\be-\b-c\bca\bas\bse\be is enabled, readline
- treats hyphens (_\b-) and underscores (_\b_) as equivalent when per-
+ If set to O\bOn\bn, and c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-i\big\bgn\bno\bor\bre\be-\b-c\bca\bas\bse\be is enabled, readline
+ treats hyphens (_\b-) and underscores (_\b_) as equivalent when per-
forming case-insensitive filename matching and completion.
c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-p\bpr\bre\bef\bfi\bix\bx-\b-d\bdi\bis\bsp\bpl\bla\bay\by-\b-l\ble\ben\bng\bgt\bth\bh (\b(0\b0)\b)
- The length in characters of the common prefix of a list of pos-
- sible completions that is displayed without modification. When
- set to a value greater than zero, common prefixes longer than
- this value are replaced with an ellipsis when displaying possi-
+ The length in characters of the common prefix of a list of pos-
+ sible completions that is displayed without modification. When
+ set to a value greater than zero, common prefixes longer than
+ this value are replaced with an ellipsis when displaying possi-
ble completions.
c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn-\b-q\bqu\bue\ber\bry\by-\b-i\bit\bte\bem\bms\bs (\b(1\b10\b00\b0)\b)
- This determines when the user is queried about viewing the num-
- ber of possible completions generated by the p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-c\bco\bom\bmp\bpl\ble\be-\b-
- t\bti\bio\bon\bns\bs command. It may be set to any integer value greater than
- or equal to zero. If the number of possible completions is
- greater than or equal to the value of this variable, readline
- will ask whether or not the user wishes to view them; otherwise
- they are simply listed on the terminal. A zero value means
+ This determines when the user is queried about viewing the num-
+ ber of possible completions generated by the p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-c\bco\bom\bmp\bpl\ble\be-\b-
+ t\bti\bio\bon\bns\bs command. It may be set to any integer value greater than
+ or equal to zero. If the number of possible completions is
+ greater than or equal to the value of this variable, readline
+ will ask whether or not the user wishes to view them; otherwise
+ they are simply listed on the terminal. A zero value means
readline should never ask; negative values are treated as zero.
c\bco\bon\bnv\bve\ber\brt\bt-\b-m\bme\bet\bta\ba (\b(O\bOn\bn)\b)
- If set to O\bOn\bn, readline will convert characters with the eighth
+ If set to O\bOn\bn, readline will convert characters with the eighth
bit set to an ASCII key sequence by stripping the eighth bit and
- prefixing an escape character (in effect, using escape as the
- _\bm_\be_\bt_\ba _\bp_\br_\be_\bf_\bi_\bx). The default is _\bO_\bn, but readline will set it to
- _\bO_\bf_\bf if the locale contains eight-bit characters. This variable
- is dependent on the L\bLC\bC_\b_C\bCT\bTY\bYP\bPE\bE locale category, and may change if
+ prefixing an escape character (in effect, using escape as the
+ _\bm_\be_\bt_\ba _\bp_\br_\be_\bf_\bi_\bx). The default is _\bO_\bn, but readline will set it to
+ _\bO_\bf_\bf if the locale contains eight-bit characters. This variable
+ is dependent on the L\bLC\bC_\b_C\bCT\bTY\bYP\bPE\bE locale category, and may change if
the locale is changed.
d\bdi\bis\bsa\bab\bbl\ble\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn (\b(O\bOf\bff\bf)\b)
If set to O\bOn\bn, readline will inhibit word completion. Completion
- characters will be inserted into the line as if they had been
+ characters will be inserted into the line as if they had been
mapped to s\bse\bel\blf\bf-\b-i\bin\bns\bse\ber\brt\bt.
e\bec\bch\bho\bo-\b-c\bco\bon\bnt\btr\bro\bol\bl-\b-c\bch\bha\bar\bra\bac\bct\bte\ber\brs\bs (\b(O\bOn\bn)\b)
- When set to O\bOn\bn, on operating systems that indicate they support
+ When set to O\bOn\bn, on operating systems that indicate they support
it, readline echoes a character corresponding to a signal gener-
ated from the keyboard.
e\bed\bdi\bit\bti\bin\bng\bg-\b-m\bmo\bod\bde\be (\b(e\bem\bma\bac\bcs\bs)\b)
ilar to _\bE_\bm_\ba_\bc_\bs or _\bv_\bi. e\bed\bdi\bit\bti\bin\bng\bg-\b-m\bmo\bod\bde\be can be set to either e\bem\bma\bac\bcs\bs or
v\bvi\bi.
e\bem\bma\bac\bcs\bs-\b-m\bmo\bod\bde\be-\b-s\bst\btr\bri\bin\bng\bg (\b(@\b@)\b)
- If the _\bs_\bh_\bo_\bw_\b-_\bm_\bo_\bd_\be_\b-_\bi_\bn_\b-_\bp_\br_\bo_\bm_\bp_\bt variable is enabled, this string is
+ If the _\bs_\bh_\bo_\bw_\b-_\bm_\bo_\bd_\be_\b-_\bi_\bn_\b-_\bp_\br_\bo_\bm_\bp_\bt variable is enabled, this string is
displayed immediately before the last line of the primary prompt
when emacs editing mode is active. The value is expanded like a
- key binding, so the standard set of meta- and control prefixes
- and backslash escape sequences is available. Use the \1 and \2
- escapes to begin and end sequences of non-printing characters,
- which can be used to embed a terminal control sequence into the
+ key binding, so the standard set of meta- and control prefixes
+ and backslash escape sequences is available. Use the \1 and \2
+ escapes to begin and end sequences of non-printing characters,
+ which can be used to embed a terminal control sequence into the
mode string.
e\ben\bna\bab\bbl\ble\be-\b-a\bac\bct\bti\biv\bve\be-\b-r\bre\beg\bgi\bio\bon\bn (\b(O\bOn\bn)\b)
- The _\bp_\bo_\bi_\bn_\bt is the current cursor position, and _\bm_\ba_\br_\bk refers to a
- saved cursor position. The text between the point and mark is
- referred to as the _\br_\be_\bg_\bi_\bo_\bn. When this variable is set to _\bO_\bn,
- readline allows certain commands to designate the region as _\ba_\bc_\b-
- _\bt_\bi_\bv_\be. When the region is active, readline highlights the text
- in the region using the value of the a\bac\bct\bti\biv\bve\be-\b-r\bre\beg\bgi\bio\bon\bn-\b-s\bst\bta\bar\brt\bt-\b-c\bco\bol\blo\bor\br,
- which defaults to the string that enables the terminal's stand-
- out mode. The active region shows the text inserted by brack-
- eted-paste and any matching text found by incremental and non-
+ The _\bp_\bo_\bi_\bn_\bt is the current cursor position, and _\bm_\ba_\br_\bk refers to a
+ saved cursor position. The text between the point and mark is
+ referred to as the _\br_\be_\bg_\bi_\bo_\bn. When this variable is set to _\bO_\bn,
+ readline allows certain commands to designate the region as _\ba_\bc_\b-
+ _\bt_\bi_\bv_\be. When the region is active, readline highlights the text
+ in the region using the value of the a\bac\bct\bti\biv\bve\be-\b-r\bre\beg\bgi\bio\bon\bn-\b-s\bst\bta\bar\brt\bt-\b-c\bco\bol\blo\bor\br,
+ which defaults to the string that enables the terminal's stand-
+ out mode. The active region shows the text inserted by brack-
+ eted-paste and any matching text found by incremental and non-
incremental history searches.
e\ben\bna\bab\bbl\ble\be-\b-b\bbr\bra\bac\bck\bke\bet\bte\bed\bd-\b-p\bpa\bas\bst\bte\be (\b(O\bOn\bn)\b)
- When set to O\bOn\bn, readline configures the terminal to insert each
- paste into the editing buffer as a single string of characters,
- instead of treating each character as if it had been read from
+ When set to O\bOn\bn, readline configures the terminal to insert each
+ paste into the editing buffer as a single string of characters,
+ instead of treating each character as if it had been read from
the keyboard. This prevents readline from executing any editing
commands bound to key sequences appearing in the pasted text.
e\ben\bna\bab\bbl\ble\be-\b-k\bke\bey\byp\bpa\bad\bd (\b(O\bOf\bff\bf)\b)
pad when it is called. Some systems need this to enable the ar-
row keys.
e\ben\bna\bab\bbl\ble\be-\b-m\bme\bet\bta\ba-\b-k\bke\bey\by (\b(O\bOn\bn)\b)
- When set to O\bOn\bn, readline will try to enable any meta modifier
- key the terminal claims to support when it is called. On many
+ When set to O\bOn\bn, readline will try to enable any meta modifier
+ key the terminal claims to support when it is called. On many
terminals, the meta key is used to send eight-bit characters.
e\bex\bxp\bpa\ban\bnd\bd-\b-t\bti\bil\bld\bde\be (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, tilde expansion is performed when readline at-
+ If set to O\bOn\bn, tilde expansion is performed when readline at-
tempts word completion.
h\bhi\bis\bst\bto\bor\bry\by-\b-p\bpr\bre\bes\bse\ber\brv\bve\be-\b-p\bpo\boi\bin\bnt\bt (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, the history code attempts to place point at the
- same location on each history line retrieved with p\bpr\bre\bev\bvi\bio\bou\bus\bs-\b-h\bhi\bis\bs-\b-
+ If set to O\bOn\bn, the history code attempts to place point at the
+ same location on each history line retrieved with p\bpr\bre\bev\bvi\bio\bou\bus\bs-\b-h\bhi\bis\bs-\b-
t\bto\bor\bry\by or n\bne\bex\bxt\bt-\b-h\bhi\bis\bst\bto\bor\bry\by.
h\bhi\bis\bst\bto\bor\bry\by-\b-s\bsi\biz\bze\be (\b(u\bun\bns\bse\bet\bt)\b)
- Set the maximum number of history entries saved in the history
- list. If set to zero, any existing history entries are deleted
+ Set the maximum number of history entries saved in the history
+ list. If set to zero, any existing history entries are deleted
and no new entries are saved. If set to a value less than zero,
- the number of history entries is not limited. By default, the
- number of history entries is set to the value of the H\bHI\bIS\bST\bTS\bSI\bIZ\bZE\bE
- shell variable. If an attempt is made to set _\bh_\bi_\bs_\bt_\bo_\br_\by_\b-_\bs_\bi_\bz_\be to a
+ the number of history entries is not limited. By default, the
+ number of history entries is set to the value of the H\bHI\bIS\bST\bTS\bSI\bIZ\bZE\bE
+ shell variable. If an attempt is made to set _\bh_\bi_\bs_\bt_\bo_\br_\by_\b-_\bs_\bi_\bz_\be to a
non-numeric value, the maximum number of history entries will be
set to 500.
h\bho\bor\bri\biz\bzo\bon\bnt\bta\bal\bl-\b-s\bsc\bcr\bro\bol\bll\bl-\b-m\bmo\bod\bde\be (\b(O\bOf\bff\bf)\b)
- When set to O\bOn\bn, makes readline use a single line for display,
+ When set to O\bOn\bn, makes readline use a single line for display,
scrolling the input horizontally on a single screen line when it
- becomes longer than the screen width rather than wrapping to a
- new line. This setting is automatically enabled for terminals
+ becomes longer than the screen width rather than wrapping to a
+ new line. This setting is automatically enabled for terminals
of height 1.
i\bin\bnp\bpu\but\bt-\b-m\bme\bet\bta\ba (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, readline will enable eight-bit input (that is, it
+ If set to O\bOn\bn, readline will enable eight-bit input (that is, it
will not strip the eighth bit from the characters it reads), re-
- gardless of what the terminal claims it can support. The name
- m\bme\bet\bta\ba-\b-f\bfl\bla\bag\bg is a synonym for this variable. The default is _\bO_\bf_\bf,
- but readline will set it to _\bO_\bn if the locale contains eight-bit
- characters. This variable is dependent on the L\bLC\bC_\b_C\bCT\bTY\bYP\bPE\bE locale
+ gardless of what the terminal claims it can support. The name
+ m\bme\bet\bta\ba-\b-f\bfl\bla\bag\bg is a synonym for this variable. The default is _\bO_\bf_\bf,
+ but readline will set it to _\bO_\bn if the locale contains eight-bit
+ characters. This variable is dependent on the L\bLC\bC_\b_C\bCT\bTY\bYP\bPE\bE locale
category, and may change if the locale is changed.
i\bis\bse\bea\bar\brc\bch\bh-\b-t\bte\ber\brm\bmi\bin\bna\bat\bto\bor\brs\bs (\b(`\b``\b`C\bC-\b-[\b[C\bC-\b-J\bJ'\b''\b')\b)
- The string of characters that should terminate an incremental
- search without subsequently executing the character as a com-
- mand. If this variable has not been given a value, the charac-
+ The string of characters that should terminate an incremental
+ search without subsequently executing the character as a com-
+ mand. If this variable has not been given a value, the charac-
ters _\bE_\bS_\bC and _\bC_\b-_\bJ will terminate an incremental search.
k\bke\bey\bym\bma\bap\bp (\b(e\bem\bma\bac\bcs\bs)\b)
- Set the current readline keymap. The set of valid keymap names
- is _\be_\bm_\ba_\bc_\bs_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\bd_\ba_\br_\bd_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bm_\be_\bt_\ba_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bc_\bt_\bl_\bx_\b, _\bv_\bi_\b, _\bv_\bi_\b-_\bc_\bo_\bm_\b-
- _\bm_\ba_\bn_\bd, and _\bv_\bi_\b-_\bi_\bn_\bs_\be_\br_\bt. _\bv_\bi is equivalent to _\bv_\bi_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd; _\be_\bm_\ba_\bc_\bs is
- equivalent to _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\bd_\ba_\br_\bd. The default value is _\be_\bm_\ba_\bc_\bs; the
+ Set the current readline keymap. The set of valid keymap names
+ is _\be_\bm_\ba_\bc_\bs_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\bd_\ba_\br_\bd_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bm_\be_\bt_\ba_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bc_\bt_\bl_\bx_\b, _\bv_\bi_\b, _\bv_\bi_\b-_\bc_\bo_\bm_\b-
+ _\bm_\ba_\bn_\bd, and _\bv_\bi_\b-_\bi_\bn_\bs_\be_\br_\bt. _\bv_\bi is equivalent to _\bv_\bi_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd; _\be_\bm_\ba_\bc_\bs is
+ equivalent to _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\bd_\ba_\br_\bd. The default value is _\be_\bm_\ba_\bc_\bs; the
value of e\bed\bdi\bit\bti\bin\bng\bg-\b-m\bmo\bod\bde\be also affects the default keymap.
k\bke\bey\bys\bse\beq\bq-\b-t\bti\bim\bme\beo\bou\but\bt (\b(5\b50\b00\b0)\b)
- Specifies the duration _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will wait for a character when
- reading an ambiguous key sequence (one that can form a complete
+ Specifies the duration _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will wait for a character when
+ reading an ambiguous key sequence (one that can form a complete
key sequence using the input read so far, or can take additional
- input to complete a longer key sequence). If no input is re-
- ceived within the timeout, _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will use the shorter but
- complete key sequence. The value is specified in milliseconds,
- so a value of 1000 means that _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will wait one second for
- additional input. If this variable is set to a value less than
- or equal to zero, or to a non-numeric value, _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will wait
- until another key is pressed to decide which key sequence to
+ input to complete a longer key sequence). If no input is re-
+ ceived within the timeout, _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will use the shorter but
+ complete key sequence. The value is specified in milliseconds,
+ so a value of 1000 means that _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will wait one second for
+ additional input. If this variable is set to a value less than
+ or equal to zero, or to a non-numeric value, _\br_\be_\ba_\bd_\bl_\bi_\bn_\be will wait
+ until another key is pressed to decide which key sequence to
complete.
m\bma\bar\brk\bk-\b-d\bdi\bir\bre\bec\bct\bto\bor\bri\bie\bes\bs (\b(O\bOn\bn)\b)
If set to O\bOn\bn, completed directory names have a slash appended.
m\bma\bar\brk\bk-\b-m\bmo\bod\bdi\bif\bfi\bie\bed\bd-\b-l\bli\bin\bne\bes\bs (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, history lines that have been modified are dis-
+ If set to O\bOn\bn, history lines that have been modified are dis-
played with a preceding asterisk (*\b*).
m\bma\bar\brk\bk-\b-s\bsy\bym\bml\bli\bin\bnk\bke\bed\bd-\b-d\bdi\bir\bre\bec\bct\bto\bor\bri\bie\bes\bs (\b(O\bOf\bff\bf)\b)
If set to O\bOn\bn, completed names which are symbolic links to direc-
- tories have a slash appended (subject to the value of m\bma\bar\brk\bk-\b-d\bdi\bi-\b-
+ tories have a slash appended (subject to the value of m\bma\bar\brk\bk-\b-d\bdi\bi-\b-
r\bre\bec\bct\bto\bor\bri\bie\bes\bs).
m\bma\bat\btc\bch\bh-\b-h\bhi\bid\bdd\bde\ben\bn-\b-f\bfi\bil\ble\bes\bs (\b(O\bOn\bn)\b)
- This variable, when set to O\bOn\bn, causes readline to match files
- whose names begin with a `.' (hidden files) when performing
- filename completion. If set to O\bOf\bff\bf, the leading `.' must be
+ This variable, when set to O\bOn\bn, causes readline to match files
+ whose names begin with a `.' (hidden files) when performing
+ filename completion. If set to O\bOf\bff\bf, the leading `.' must be
supplied by the user in the filename to be completed.
m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-d\bdi\bis\bsp\bpl\bla\bay\by-\b-p\bpr\bre\bef\bfi\bix\bx (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, menu completion displays the common prefix of the
+ If set to O\bOn\bn, menu completion displays the common prefix of the
list of possible completions (which may be empty) before cycling
through the list.
o\bou\but\btp\bpu\but\bt-\b-m\bme\bet\bta\ba (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, readline will display characters with the eighth
+ If set to O\bOn\bn, readline will display characters with the eighth
bit set directly rather than as a meta-prefixed escape sequence.
The default is _\bO_\bf_\bf, but readline will set it to _\bO_\bn if the locale
- contains eight-bit characters. This variable is dependent on
- the L\bLC\bC_\b_C\bCT\bTY\bYP\bPE\bE locale category, and may change if the locale is
+ contains eight-bit characters. This variable is dependent on
+ the L\bLC\bC_\b_C\bCT\bTY\bYP\bPE\bE locale category, and may change if the locale is
changed.
p\bpa\bag\bge\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs (\b(O\bOn\bn)\b)
- If set to O\bOn\bn, readline uses an internal _\bm_\bo_\br_\be-like pager to dis-
+ If set to O\bOn\bn, readline uses an internal _\bm_\bo_\br_\be-like pager to dis-
play a screenful of possible completions at a time.
p\bpr\bri\bin\bnt\bt-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs-\b-h\bho\bor\bri\biz\bzo\bon\bnt\bta\bal\bll\bly\by (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, readline will display completions with matches
- sorted horizontally in alphabetical order, rather than down the
+ If set to O\bOn\bn, readline will display completions with matches
+ sorted horizontally in alphabetical order, rather than down the
screen.
r\bre\bev\bve\ber\brt\bt-\b-a\bal\bll\bl-\b-a\bat\bt-\b-n\bne\bew\bwl\bli\bin\bne\be (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, readline will undo all changes to history lines
+ If set to O\bOn\bn, readline will undo all changes to history lines
before returning when a\bac\bcc\bce\bep\bpt\bt-\b-l\bli\bin\bne\be is executed. By default, his-
- tory lines may be modified and retain individual undo lists
+ tory lines may be modified and retain individual undo lists
across calls to r\bre\bea\bad\bdl\bli\bin\bne\be.
s\bse\bea\bar\brc\bch\bh-\b-i\big\bgn\bno\bor\bre\be-\b-c\bca\bas\bse\be (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, readline performs incremental and non-incremental
+ If set to O\bOn\bn, readline performs incremental and non-incremental
history list searches in a case-insensitive fashion.
s\bsh\bho\bow\bw-\b-a\bal\bll\bl-\b-i\bif\bf-\b-a\bam\bmb\bbi\big\bgu\buo\bou\bus\bs (\b(O\bOf\bff\bf)\b)
- This alters the default behavior of the completion functions.
+ This alters the default behavior of the completion functions.
If set to O\bOn\bn, words which have more than one possible completion
- cause the matches to be listed immediately instead of ringing
+ cause the matches to be listed immediately instead of ringing
the bell.
s\bsh\bho\bow\bw-\b-a\bal\bll\bl-\b-i\bif\bf-\b-u\bun\bnm\bmo\bod\bdi\bif\bfi\bie\bed\bd (\b(O\bOf\bff\bf)\b)
- This alters the default behavior of the completion functions in
+ This alters the default behavior of the completion functions in
a fashion similar to s\bsh\bho\bow\bw-\b-a\bal\bll\bl-\b-i\bif\bf-\b-a\bam\bmb\bbi\big\bgu\buo\bou\bus\bs. If set to O\bOn\bn, words
- which have more than one possible completion without any possi-
- ble partial completion (the possible completions don't share a
- common prefix) cause the matches to be listed immediately in-
+ which have more than one possible completion without any possi-
+ ble partial completion (the possible completions don't share a
+ common prefix) cause the matches to be listed immediately in-
stead of ringing the bell.
s\bsh\bho\bow\bw-\b-m\bmo\bod\bde\be-\b-i\bin\bn-\b-p\bpr\bro\bom\bmp\bpt\bt (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, add a string to the beginning of the prompt indi-
- cating the editing mode: emacs, vi command, or vi insertion.
+ If set to O\bOn\bn, add a string to the beginning of the prompt indi-
+ cating the editing mode: emacs, vi command, or vi insertion.
The mode strings are user-settable (e.g., _\be_\bm_\ba_\bc_\bs_\b-_\bm_\bo_\bd_\be_\b-_\bs_\bt_\br_\bi_\bn_\bg).
s\bsk\bki\bip\bp-\b-c\bco\bom\bmp\bpl\ble\bet\bte\bed\bd-\b-t\bte\bex\bxt\bt (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, this alters the default completion behavior when
- inserting a single match into the line. It's only active when
- performing completion in the middle of a word. If enabled,
- readline does not insert characters from the completion that
- match characters after point in the word being completed, so
+ If set to O\bOn\bn, this alters the default completion behavior when
+ inserting a single match into the line. It's only active when
+ performing completion in the middle of a word. If enabled,
+ readline does not insert characters from the completion that
+ match characters after point in the word being completed, so
portions of the word following the cursor are not duplicated.
v\bvi\bi-\b-c\bcm\bmd\bd-\b-m\bmo\bod\bde\be-\b-s\bst\btr\bri\bin\bng\bg (\b((\b(c\bcm\bmd\bd)\b))\b)
- If the _\bs_\bh_\bo_\bw_\b-_\bm_\bo_\bd_\be_\b-_\bi_\bn_\b-_\bp_\br_\bo_\bm_\bp_\bt variable is enabled, this string is
+ If the _\bs_\bh_\bo_\bw_\b-_\bm_\bo_\bd_\be_\b-_\bi_\bn_\b-_\bp_\br_\bo_\bm_\bp_\bt variable is enabled, this string is
displayed immediately before the last line of the primary prompt
- when vi editing mode is active and in command mode. The value
+ when vi editing mode is active and in command mode. The value
is expanded like a key binding, so the standard set of meta- and
- control prefixes and backslash escape sequences is available.
- Use the \1 and \2 escapes to begin and end sequences of non-
- printing characters, which can be used to embed a terminal con-
+ control prefixes and backslash escape sequences is available.
+ Use the \1 and \2 escapes to begin and end sequences of non-
+ printing characters, which can be used to embed a terminal con-
trol sequence into the mode string.
v\bvi\bi-\b-i\bin\bns\bs-\b-m\bmo\bod\bde\be-\b-s\bst\btr\bri\bin\bng\bg (\b((\b(i\bin\bns\bs)\b))\b)
- If the _\bs_\bh_\bo_\bw_\b-_\bm_\bo_\bd_\be_\b-_\bi_\bn_\b-_\bp_\br_\bo_\bm_\bp_\bt variable is enabled, this string is
+ If the _\bs_\bh_\bo_\bw_\b-_\bm_\bo_\bd_\be_\b-_\bi_\bn_\b-_\bp_\br_\bo_\bm_\bp_\bt variable is enabled, this string is
displayed immediately before the last line of the primary prompt
when vi editing mode is active and in insertion mode. The value
is expanded like a key binding, so the standard set of meta- and
- control prefixes and backslash escape sequences is available.
- Use the \1 and \2 escapes to begin and end sequences of non-
- printing characters, which can be used to embed a terminal con-
+ control prefixes and backslash escape sequences is available.
+ Use the \1 and \2 escapes to begin and end sequences of non-
+ printing characters, which can be used to embed a terminal con-
trol sequence into the mode string.
v\bvi\bis\bsi\bib\bbl\ble\be-\b-s\bst\bta\bat\bts\bs (\b(O\bOf\bff\bf)\b)
- If set to O\bOn\bn, a character denoting a file's type as reported by
- _\bs_\bt_\ba_\bt(2) is appended to the filename when listing possible com-
+ If set to O\bOn\bn, a character denoting a file's type as reported by
+ _\bs_\bt_\ba_\bt(2) is appended to the filename when listing possible com-
pletions.
R\bRe\bea\bad\bdl\bli\bin\bne\be C\bCo\bon\bnd\bdi\bit\bti\bio\bon\bna\bal\bl C\bCo\bon\bns\bst\btr\bru\buc\bct\bts\bs
- Readline implements a facility similar in spirit to the conditional
- compilation features of the C preprocessor which allows key bindings
- and variable settings to be performed as the result of tests. There
+ Readline implements a facility similar in spirit to the conditional
+ compilation features of the C preprocessor which allows key bindings
+ and variable settings to be performed as the result of tests. There
are four parser directives used.
- $\b$i\bif\bf The $\b$i\bif\bf construct allows bindings to be made based on the edit-
- ing mode, the terminal being used, or the application using
+ $\b$i\bif\bf The $\b$i\bif\bf construct allows bindings to be made based on the edit-
+ ing mode, the terminal being used, or the application using
readline. The text of the test, after any comparison operator,
- extends to the end of the line; unless otherwise noted, no
+ extends to the end of the line; unless otherwise noted, no
characters are required to isolate it.
- m\bmo\bod\bde\be The m\bmo\bod\bde\be=\b= form of the $\b$i\bif\bf directive is used to test
- whether readline is in emacs or vi mode. This may be
- used in conjunction with the s\bse\bet\bt k\bke\bey\bym\bma\bap\bp command, for in-
- stance, to set bindings in the _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\bd_\ba_\br_\bd and
- _\be_\bm_\ba_\bc_\bs_\b-_\bc_\bt_\bl_\bx keymaps only if readline is starting out in
+ m\bmo\bod\bde\be The m\bmo\bod\bde\be=\b= form of the $\b$i\bif\bf directive is used to test
+ whether readline is in emacs or vi mode. This may be
+ used in conjunction with the s\bse\bet\bt k\bke\bey\bym\bma\bap\bp command, for in-
+ stance, to set bindings in the _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\bd_\ba_\br_\bd and
+ _\be_\bm_\ba_\bc_\bs_\b-_\bc_\bt_\bl_\bx keymaps only if readline is starting out in
emacs mode.
- t\bte\ber\brm\bm The t\bte\ber\brm\bm=\b= form may be used to include terminal-specific
+ t\bte\ber\brm\bm The t\bte\ber\brm\bm=\b= form may be used to include terminal-specific
key bindings, perhaps to bind the key sequences output by
the terminal's function keys. The word on the right side
of the =\b= is tested against both the full name of the ter-
- minal and the portion of the terminal name before the
- first -\b-. This allows _\bs_\bu_\bn to match both _\bs_\bu_\bn and _\bs_\bu_\bn_\b-_\bc_\bm_\bd,
+ minal and the portion of the terminal name before the
+ first -\b-. This allows _\bs_\bu_\bn to match both _\bs_\bu_\bn and _\bs_\bu_\bn_\b-_\bc_\bm_\bd,
for instance.
v\bve\ber\brs\bsi\bio\bon\bn
- The v\bve\ber\brs\bsi\bio\bon\bn test may be used to perform comparisons
- against specific readline versions. The v\bve\ber\brs\bsi\bio\bon\bn expands
- to the current readline version. The set of comparison
- operators includes =\b=, (and =\b==\b=), !\b!=\b=, <\b<=\b=, >\b>=\b=, <\b<, and >\b>.
- The version number supplied on the right side of the op-
- erator consists of a major version number, an optional
+ The v\bve\ber\brs\bsi\bio\bon\bn test may be used to perform comparisons
+ against specific readline versions. The v\bve\ber\brs\bsi\bio\bon\bn expands
+ to the current readline version. The set of comparison
+ operators includes =\b=, (and =\b==\b=), !\b!=\b=, <\b<=\b=, >\b>=\b=, <\b<, and >\b>.
+ The version number supplied on the right side of the op-
+ erator consists of a major version number, an optional
decimal point, and an optional minor version (e.g., 7\b7.\b.1\b1).
- If the minor version is omitted, it is assumed to be 0\b0.
+ If the minor version is omitted, it is assumed to be 0\b0.
The operator may be separated from the string v\bve\ber\brs\bsi\bio\bon\bn and
from the version number argument by whitespace.
a\bap\bpp\bpl\bli\bic\bca\bat\bti\bio\bon\bn
The a\bap\bpp\bpl\bli\bic\bca\bat\bti\bio\bon\bn construct is used to include application-
- specific settings. Each program using the readline li-
- brary sets the _\ba_\bp_\bp_\bl_\bi_\bc_\ba_\bt_\bi_\bo_\bn _\bn_\ba_\bm_\be, and an initialization
+ specific settings. Each program using the readline li-
+ brary sets the _\ba_\bp_\bp_\bl_\bi_\bc_\ba_\bt_\bi_\bo_\bn _\bn_\ba_\bm_\be, and an initialization
file can test for a particular value. This could be used
- to bind key sequences to functions useful for a specific
- program. For instance, the following command adds a key
- sequence that quotes the current or previous word in
+ to bind key sequences to functions useful for a specific
+ program. For instance, the following command adds a key
+ sequence that quotes the current or previous word in
b\bba\bas\bsh\bh:
$\b$i\bif\bf Bash
_\bv_\ba_\br_\bi_\ba_\bb_\bl_\be
The _\bv_\ba_\br_\bi_\ba_\bb_\bl_\be construct provides simple equality tests for
- readline variables and values. The permitted comparison
- operators are _\b=, _\b=_\b=, and _\b!_\b=. The variable name must be
+ readline variables and values. The permitted comparison
+ operators are _\b=, _\b=_\b=, and _\b!_\b=. The variable name must be
separated from the comparison operator by whitespace; the
- operator may be separated from the value on the right
- hand side by whitespace. Both string and boolean vari-
- ables may be tested. Boolean variables must be tested
+ operator may be separated from the value on the right
+ hand side by whitespace. Both string and boolean vari-
+ ables may be tested. Boolean variables must be tested
against the values _\bo_\bn and _\bo_\bf_\bf.
$\b$e\ben\bnd\bdi\bif\bf This command, as seen in the previous example, terminates an $\b$i\bif\bf
test fails.
$\b$i\bin\bnc\bcl\blu\bud\bde\be
- This directive takes a single filename as an argument and reads
- commands and bindings from that file. For example, the follow-
+ This directive takes a single filename as an argument and reads
+ commands and bindings from that file. For example, the follow-
ing directive would read _\b/_\be_\bt_\bc_\b/_\bi_\bn_\bp_\bu_\bt_\br_\bc:
$\b$i\bin\bnc\bcl\blu\bud\bde\be _\b/_\be_\bt_\bc_\b/_\bi_\bn_\bp_\bu_\bt_\br_\bc
S\bSe\bea\bar\brc\bch\bhi\bin\bng\bg
- Readline provides commands for searching through the command history
+ Readline provides commands for searching through the command history
(see H\bHI\bIS\bST\bTO\bOR\bRY\bY below) for lines containing a specified string. There are
two search modes: _\bi_\bn_\bc_\br_\be_\bm_\be_\bn_\bt_\ba_\bl and _\bn_\bo_\bn_\b-_\bi_\bn_\bc_\br_\be_\bm_\be_\bn_\bt_\ba_\bl.
- Incremental searches begin before the user has finished typing the
- search string. As each character of the search string is typed, read-
+ Incremental searches begin before the user has finished typing the
+ search string. As each character of the search string is typed, read-
line displays the next entry from the history matching the string typed
- so far. An incremental search requires only as many characters as
- needed to find the desired history entry. The characters present in
- the value of the i\bis\bse\bea\bar\brc\bch\bh-\b-t\bte\ber\brm\bmi\bin\bna\bat\bto\bor\brs\bs variable are used to terminate an
+ so far. An incremental search requires only as many characters as
+ needed to find the desired history entry. The characters present in
+ the value of the i\bis\bse\bea\bar\brc\bch\bh-\b-t\bte\ber\brm\bmi\bin\bna\bat\bto\bor\brs\bs variable are used to terminate an
incremental search. If that variable has not been assigned a value the
- Escape and Control-J characters will terminate an incremental search.
- Control-G will abort an incremental search and restore the original
- line. When the search is terminated, the history entry containing the
+ Escape and Control-J characters will terminate an incremental search.
+ Control-G will abort an incremental search and restore the original
+ line. When the search is terminated, the history entry containing the
search string becomes the current line.
- To find other matching entries in the history list, type Control-S or
- Control-R as appropriate. This will search backward or forward in the
- history for the next entry matching the search string typed so far.
- Any other key sequence bound to a readline command will terminate the
- search and execute that command. For instance, a _\bn_\be_\bw_\bl_\bi_\bn_\be will termi-
+ To find other matching entries in the history list, type Control-S or
+ Control-R as appropriate. This will search backward or forward in the
+ history for the next entry matching the search string typed so far.
+ Any other key sequence bound to a readline command will terminate the
+ search and execute that command. For instance, a _\bn_\be_\bw_\bl_\bi_\bn_\be will termi-
nate the search and accept the line, thereby executing the command from
the history list.
Readline remembers the last incremental search string. If two Control-
- Rs are typed without any intervening characters defining a new search
+ Rs are typed without any intervening characters defining a new search
string, any remembered search string is used.
- Non-incremental searches read the entire search string before starting
- to search for matching history lines. The search string may be typed
+ Non-incremental searches read the entire search string before starting
+ to search for matching history lines. The search string may be typed
by the user or be part of the contents of the current line.
R\bRe\bea\bad\bdl\bli\bin\bne\be C\bCo\bom\bmm\bma\ban\bnd\bd N\bNa\bam\bme\bes\bs
- The following is a list of the names of the commands and the default
+ The following is a list of the names of the commands and the default
key sequences to which they are bound. Command names without an accom-
panying key sequence are unbound by default. In the following descrip-
- tions, _\bp_\bo_\bi_\bn_\bt refers to the current cursor position, and _\bm_\ba_\br_\bk refers to
- a cursor position saved by the s\bse\bet\bt-\b-m\bma\bar\brk\bk command. The text between the
+ tions, _\bp_\bo_\bi_\bn_\bt refers to the current cursor position, and _\bm_\ba_\br_\bk refers to
+ a cursor position saved by the s\bse\bet\bt-\b-m\bma\bar\brk\bk command. The text between the
point and mark is referred to as the _\br_\be_\bg_\bi_\bo_\bn.
C\bCo\bom\bmm\bma\ban\bnd\bds\bs f\bfo\bor\br M\bMo\bov\bvi\bin\bng\bg
Move forward to the end of the next word. Words are composed of
alphanumeric characters (letters and digits).
b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd (\b(M\bM-\b-b\bb)\b)
- Move back to the start of the current or previous word. Words
+ Move back to the start of the current or previous word. Words
are composed of alphanumeric characters (letters and digits).
s\bsh\bhe\bel\bll\bl-\b-f\bfo\bor\brw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd
- Move forward to the end of the next word. Words are delimited
+ Move forward to the end of the next word. Words are delimited
by non-quoted shell metacharacters.
s\bsh\bhe\bel\bll\bl-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd
- Move back to the start of the current or previous word. Words
+ Move back to the start of the current or previous word. Words
are delimited by non-quoted shell metacharacters.
p\bpr\bre\bev\bvi\bio\bou\bus\bs-\b-s\bsc\bcr\bre\bee\ben\bn-\b-l\bli\bin\bne\be
- Attempt to move point to the same physical screen column on the
- previous physical screen line. This will not have the desired
- effect if the current readline line does not take up more than
- one physical line or if point is not greater than the length of
+ Attempt to move point to the same physical screen column on the
+ previous physical screen line. This will not have the desired
+ effect if the current readline line does not take up more than
+ one physical line or if point is not greater than the length of
the prompt plus the screen width.
n\bne\bex\bxt\bt-\b-s\bsc\bcr\bre\bee\ben\bn-\b-l\bli\bin\bne\be
- Attempt to move point to the same physical screen column on the
+ Attempt to move point to the same physical screen column on the
next physical screen line. This will not have the desired effect
- if the current readline line does not take up more than one
- physical line or if the length of the current readline line is
+ if the current readline line does not take up more than one
+ physical line or if the length of the current readline line is
not greater than the length of the prompt plus the screen width.
c\bcl\ble\bea\bar\br-\b-d\bdi\bis\bsp\bpl\bla\bay\by (\b(M\bM-\b-C\bC-\b-l\bl)\b)
- Clear the screen and, if possible, the terminal's scrollback
- buffer, then redraw the current line, leaving the current line
+ Clear the screen and, if possible, the terminal's scrollback
+ buffer, then redraw the current line, leaving the current line
at the top of the screen.
c\bcl\ble\bea\bar\br-\b-s\bsc\bcr\bre\bee\ben\bn (\b(C\bC-\b-l\bl)\b)
Clear the screen, then redraw the current line, leaving the cur-
- rent line at the top of the screen. With an argument, refresh
+ rent line at the top of the screen. With an argument, refresh
the current line without clearing the screen.
r\bre\bed\bdr\bra\baw\bw-\b-c\bcu\bur\brr\bre\ben\bnt\bt-\b-l\bli\bin\bne\be
Refresh the current line.
C\bCo\bom\bmm\bma\ban\bnd\bds\bs f\bfo\bor\br M\bMa\ban\bni\bip\bpu\bul\bla\bat\bti\bin\bng\bg t\bth\bhe\be H\bHi\bis\bst\bto\bor\bry\by
a\bac\bcc\bce\bep\bpt\bt-\b-l\bli\bin\bne\be (\b(N\bNe\bew\bwl\bli\bin\bne\be,\b, R\bRe\bet\btu\bur\brn\bn)\b)
Accept the line regardless of where the cursor is. If this line
- is non-empty, add it to the history list according to the state
- of the H\bHI\bIS\bST\bTC\bCO\bON\bNT\bTR\bRO\bOL\bL variable. If the line is a modified history
+ is non-empty, add it to the history list according to the state
+ of the H\bHI\bIS\bST\bTC\bCO\bON\bNT\bTR\bRO\bOL\bL variable. If the line is a modified history
line, then restore the history line to its original state.
p\bpr\bre\bev\bvi\bio\bou\bus\bs-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(C\bC-\b-p\bp)\b)
Fetch the previous command from the history list, moving back in
the list.
n\bne\bex\bxt\bt-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(C\bC-\b-n\bn)\b)
- Fetch the next command from the history list, moving forward in
+ Fetch the next command from the history list, moving forward in
the list.
b\bbe\beg\bgi\bin\bnn\bni\bin\bng\bg-\b-o\bof\bf-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(M\bM-\b-<\b<)\b)
Move to the first line in the history.
e\ben\bnd\bd-\b-o\bof\bf-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(M\bM-\b->\b>)\b)
- Move to the end of the input history, i.e., the line currently
+ Move to the end of the input history, i.e., the line currently
being entered.
o\bop\bpe\ber\bra\bat\bte\be-\b-a\ban\bnd\bd-\b-g\bge\bet\bt-\b-n\bne\bex\bxt\bt (\b(C\bC-\b-o\bo)\b)
- Accept the current line for execution and fetch the next line
- relative to the current line from the history for editing. A
- numeric argument, if supplied, specifies the history entry to
+ Accept the current line for execution and fetch the next line
+ relative to the current line from the history for editing. A
+ numeric argument, if supplied, specifies the history entry to
use instead of the current line.
f\bfe\bet\btc\bch\bh-\b-h\bhi\bis\bst\bto\bor\bry\by
- With a numeric argument, fetch that entry from the history list
+ With a numeric argument, fetch that entry from the history list
and make it the current line. Without an argument, move back to
the first entry in the history list.
r\bre\bev\bve\ber\brs\bse\be-\b-s\bse\bea\bar\brc\bch\bh-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(C\bC-\b-r\br)\b)
- Search backward starting at the current line and moving `up'
- through the history as necessary. This is an incremental
+ Search backward starting at the current line and moving `up'
+ through the history as necessary. This is an incremental
search.
f\bfo\bor\brw\bwa\bar\brd\bd-\b-s\bse\bea\bar\brc\bch\bh-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(C\bC-\b-s\bs)\b)
- Search forward starting at the current line and moving `down'
- through the history as necessary. This is an incremental
+ Search forward starting at the current line and moving `down'
+ through the history as necessary. This is an incremental
search.
n\bno\bon\bn-\b-i\bin\bnc\bcr\bre\bem\bme\ben\bnt\bta\bal\bl-\b-r\bre\bev\bve\ber\brs\bse\be-\b-s\bse\bea\bar\brc\bch\bh-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(M\bM-\b-p\bp)\b)
Search backward through the history starting at the current line
- using a non-incremental search for a string supplied by the
+ using a non-incremental search for a string supplied by the
user.
n\bno\bon\bn-\b-i\bin\bnc\bcr\bre\bem\bme\ben\bnt\bta\bal\bl-\b-f\bfo\bor\brw\bwa\bar\brd\bd-\b-s\bse\bea\bar\brc\bch\bh-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(M\bM-\b-n\bn)\b)
- Search forward through the history using a non-incremental
+ Search forward through the history using a non-incremental
search for a string supplied by the user.
h\bhi\bis\bst\bto\bor\bry\by-\b-s\bse\bea\bar\brc\bch\bh-\b-f\bfo\bor\brw\bwa\bar\brd\bd
- Search forward through the history for the string of characters
- between the start of the current line and the point. This is a
+ Search forward through the history for the string of characters
+ between the start of the current line and the point. This is a
non-incremental search.
h\bhi\bis\bst\bto\bor\bry\by-\b-s\bse\bea\bar\brc\bch\bh-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd
Search backward through the history for the string of characters
- between the start of the current line and the point. This is a
+ between the start of the current line and the point. This is a
non-incremental search.
h\bhi\bis\bst\bto\bor\bry\by-\b-s\bsu\bub\bbs\bst\btr\bri\bin\bng\bg-\b-s\bse\bea\bar\brc\bch\bh-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd
Search backward through the history for the string of characters
between the start of the current line and the current cursor po-
- sition (the _\bp_\bo_\bi_\bn_\bt). The search string may match anywhere in a
+ sition (the _\bp_\bo_\bi_\bn_\bt). The search string may match anywhere in a
history line. This is a non-incremental search.
h\bhi\bis\bst\bto\bor\bry\by-\b-s\bsu\bub\bbs\bst\btr\bri\bin\bng\bg-\b-s\bse\bea\bar\brc\bch\bh-\b-f\bfo\bor\brw\bwa\bar\brd\bd
- Search forward through the history for the string of characters
+ Search forward through the history for the string of characters
between the start of the current line and the point. The search
- string may match anywhere in a history line. This is a non-in-
+ string may match anywhere in a history line. This is a non-in-
cremental search.
y\bya\ban\bnk\bk-\b-n\bnt\bth\bh-\b-a\bar\brg\bg (\b(M\bM-\b-C\bC-\b-y\by)\b)
- Insert the first argument to the previous command (usually the
+ Insert the first argument to the previous command (usually the
second word on the previous line) at point. With an argument _\bn,
- insert the _\bnth word from the previous command (the words in the
- previous command begin with word 0). A negative argument in-
- serts the _\bnth word from the end of the previous command. Once
- the argument _\bn is computed, the argument is extracted as if the
+ insert the _\bnth word from the previous command (the words in the
+ previous command begin with word 0). A negative argument in-
+ serts the _\bnth word from the end of the previous command. Once
+ the argument _\bn is computed, the argument is extracted as if the
"!_\bn" history expansion had been specified.
y\bya\ban\bnk\bk-\b-l\bla\bas\bst\bt-\b-a\bar\brg\bg (\b(M\bM-\b-.\b.,\b, M\bM-\b-_\b_)\b)
- Insert the last argument to the previous command (the last word
+ Insert the last argument to the previous command (the last word
of the previous history entry). With a numeric argument, behave
- exactly like y\bya\ban\bnk\bk-\b-n\bnt\bth\bh-\b-a\bar\brg\bg. Successive calls to y\bya\ban\bnk\bk-\b-l\bla\bas\bst\bt-\b-a\bar\brg\bg
- move back through the history list, inserting the last word (or
- the word specified by the argument to the first call) of each
+ exactly like y\bya\ban\bnk\bk-\b-n\bnt\bth\bh-\b-a\bar\brg\bg. Successive calls to y\bya\ban\bnk\bk-\b-l\bla\bas\bst\bt-\b-a\bar\brg\bg
+ move back through the history list, inserting the last word (or
+ the word specified by the argument to the first call) of each
line in turn. Any numeric argument supplied to these successive
- calls determines the direction to move through the history. A
- negative argument switches the direction through the history
+ calls determines the direction to move through the history. A
+ negative argument switches the direction through the history
(back or forward). The history expansion facilities are used to
extract the last word, as if the "!$" history expansion had been
specified.
s\bsh\bhe\bel\bll\bl-\b-e\bex\bxp\bpa\ban\bnd\bd-\b-l\bli\bin\bne\be (\b(M\bM-\b-C\bC-\b-e\be)\b)
- Expand the line by performing shell word expansions. This per-
+ Expand the line by performing shell word expansions. This per-
forms alias and history expansion, $\b$'_\bs_\bt_\br_\bi_\bn_\bg' and $\b$"_\bs_\bt_\br_\bi_\bn_\bg" quot-
- ing, tilde expansion, parameter and variable expansion, arith-
+ ing, tilde expansion, parameter and variable expansion, arith-
metic expansion, word splitting, and quote removal. See H\bHI\bIS\bST\bTO\bOR\bRY\bY
E\bEX\bXP\bPA\bAN\bNS\bSI\bIO\bON\bN below for a description of history expansion.
h\bhi\bis\bst\bto\bor\bry\by-\b-e\bex\bxp\bpa\ban\bnd\bd-\b-l\bli\bin\bne\be (\b(M\bM-\b-^\b^)\b)
- Perform history expansion on the current line. See H\bHI\bIS\bST\bTO\bOR\bRY\bY E\bEX\bX-\b-
+ Perform history expansion on the current line. See H\bHI\bIS\bST\bTO\bOR\bRY\bY E\bEX\bX-\b-
P\bPA\bAN\bNS\bSI\bIO\bON\bN below for a description of history expansion.
m\bma\bag\bgi\bic\bc-\b-s\bsp\bpa\bac\bce\be
- Perform history expansion on the current line and insert a
+ Perform history expansion on the current line and insert a
space. See H\bHI\bIS\bST\bTO\bOR\bRY\bY E\bEX\bXP\bPA\bAN\bNS\bSI\bIO\bON\bN below for a description of history
expansion.
a\bal\bli\bia\bas\bs-\b-e\bex\bxp\bpa\ban\bnd\bd-\b-l\bli\bin\bne\be
- Perform alias expansion on the current line. See A\bAL\bLI\bIA\bAS\bSE\bES\bS above
+ Perform alias expansion on the current line. See A\bAL\bLI\bIA\bAS\bSE\bES\bS above
for a description of alias expansion.
h\bhi\bis\bst\bto\bor\bry\by-\b-a\ban\bnd\bd-\b-a\bal\bli\bia\bas\bs-\b-e\bex\bxp\bpa\ban\bnd\bd-\b-l\bli\bin\bne\be
Perform history and alias expansion on the current line.
i\bin\bns\bse\ber\brt\bt-\b-l\bla\bas\bst\bt-\b-a\bar\brg\bgu\bum\bme\ben\bnt\bt (\b(M\bM-\b-.\b.,\b, M\bM-\b-_\b_)\b)
A synonym for y\bya\ban\bnk\bk-\b-l\bla\bas\bst\bt-\b-a\bar\brg\bg.
e\bed\bdi\bit\bt-\b-a\ban\bnd\bd-\b-e\bex\bxe\bec\bcu\but\bte\be-\b-c\bco\bom\bmm\bma\ban\bnd\bd (\b(C\bC-\b-x\bx C\bC-\b-e\be)\b)
- Invoke an editor on the current command line, and execute the
+ Invoke an editor on the current command line, and execute the
result as shell commands. B\bBa\bas\bsh\bh attempts to invoke $\b$V\bVI\bIS\bSU\bUA\bAL\bL, $\b$E\bED\bD-\b-
I\bIT\bTO\bOR\bR, and _\be_\bm_\ba_\bc_\bs as the editor, in that order.
C\bCo\bom\bmm\bma\ban\bnd\bds\bs f\bfo\bor\br C\bCh\bha\ban\bng\bgi\bin\bng\bg T\bTe\bex\bxt\bt
_\be_\bn_\bd_\b-_\bo_\bf_\b-_\bf_\bi_\bl_\be (\b(u\bus\bsu\bua\bal\bll\bly\by C\bC-\b-d\bd)\b)
- The character indicating end-of-file as set, for example, by
- ``stty''. If this character is read when there are no charac-
- ters on the line, and point is at the beginning of the line,
+ The character indicating end-of-file as set, for example, by
+ ``stty''. If this character is read when there are no charac-
+ ters on the line, and point is at the beginning of the line,
readline interprets it as the end of input and returns E\bEO\bOF\bF.
d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br (\b(C\bC-\b-d\bd)\b)
Delete the character at point. If this function is bound to the
same character as the tty E\bEO\bOF\bF character, as C\bC-\b-d\bd commonly is, see
above for the effects.
b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br (\b(R\bRu\bub\bbo\bou\but\bt)\b)
- Delete the character behind the cursor. When given a numeric
+ Delete the character behind the cursor. When given a numeric
argument, save the deleted text on the kill ring.
f\bfo\bor\brw\bwa\bar\brd\bd-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br
- Delete the character under the cursor, unless the cursor is at
+ Delete the character under the cursor, unless the cursor is at
the end of the line, in which case the character behind the cur-
sor is deleted.
q\bqu\buo\bot\bte\bed\bd-\b-i\bin\bns\bse\ber\brt\bt (\b(C\bC-\b-q\bq,\b, C\bC-\b-v\bv)\b)
- Add the next character typed to the line verbatim. This is how
+ Add the next character typed to the line verbatim. This is how
to insert characters like C\bC-\b-q\bq, for example.
t\bta\bab\bb-\b-i\bin\bns\bse\ber\brt\bt (\b(C\bC-\b-v\bv T\bTA\bAB\bB)\b)
Insert a tab character.
s\bse\bel\blf\bf-\b-i\bin\bns\bse\ber\brt\bt (\b(a\ba,\b, b\bb,\b, A\bA,\b, 1\b1,\b, !\b!,\b, .\b..\b..\b.)\b)
Insert the character typed.
t\btr\bra\ban\bns\bsp\bpo\bos\bse\be-\b-c\bch\bha\bar\brs\bs (\b(C\bC-\b-t\bt)\b)
- Drag the character before point forward over the character at
- point, moving point forward as well. If point is at the end of
- the line, then this transposes the two characters before point.
+ Drag the character before point forward over the character at
+ point, moving point forward as well. If point is at the end of
+ the line, then this transposes the two characters before point.
Negative arguments have no effect.
t\btr\bra\ban\bns\bsp\bpo\bos\bse\be-\b-w\bwo\bor\brd\bds\bs (\b(M\bM-\b-t\bt)\b)
- Drag the word before point past the word after point, moving
- point over that word as well. If point is at the end of the
+ Drag the word before point past the word after point, moving
+ point over that word as well. If point is at the end of the
line, this transposes the last two words on the line.
u\bup\bpc\bca\bas\bse\be-\b-w\bwo\bor\brd\bd (\b(M\bM-\b-u\bu)\b)
- Uppercase the current (or following) word. With a negative ar-
+ Uppercase the current (or following) word. With a negative ar-
gument, uppercase the previous word, but do not move point.
d\bdo\bow\bwn\bnc\bca\bas\bse\be-\b-w\bwo\bor\brd\bd (\b(M\bM-\b-l\bl)\b)
- Lowercase the current (or following) word. With a negative ar-
+ Lowercase the current (or following) word. With a negative ar-
gument, lowercase the previous word, but do not move point.
c\bca\bap\bpi\bit\bta\bal\bli\biz\bze\be-\b-w\bwo\bor\brd\bd (\b(M\bM-\b-c\bc)\b)
Capitalize the current (or following) word. With a negative ar-
gument, capitalize the previous word, but do not move point.
o\bov\bve\ber\brw\bwr\bri\bit\bte\be-\b-m\bmo\bod\bde\be
- Toggle overwrite mode. With an explicit positive numeric argu-
+ Toggle overwrite mode. With an explicit positive numeric argu-
ment, switches to overwrite mode. With an explicit non-positive
numeric argument, switches to insert mode. This command affects
- only e\bem\bma\bac\bcs\bs mode; v\bvi\bi mode does overwrite differently. Each call
+ only e\bem\bma\bac\bcs\bs mode; v\bvi\bi mode does overwrite differently. Each call
to _\br_\be_\ba_\bd_\bl_\bi_\bn_\be_\b(_\b) starts in insert mode. In overwrite mode, charac-
- ters bound to s\bse\bel\blf\bf-\b-i\bin\bns\bse\ber\brt\bt replace the text at point rather than
- pushing the text to the right. Characters bound to b\bba\bac\bck\bk-\b-
- w\bwa\bar\brd\bd-\b-d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br replace the character before point with a
+ ters bound to s\bse\bel\blf\bf-\b-i\bin\bns\bse\ber\brt\bt replace the text at point rather than
+ pushing the text to the right. Characters bound to b\bba\bac\bck\bk-\b-
+ w\bwa\bar\brd\bd-\b-d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br replace the character before point with a
space. By default, this command is unbound.
K\bKi\bil\bll\bli\bin\bng\bg a\ban\bnd\bd Y\bYa\ban\bnk\bki\bin\bng\bg
b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-k\bki\bil\bll\bl-\b-l\bli\bin\bne\be (\b(C\bC-\b-x\bx R\bRu\bub\bbo\bou\but\bt)\b)
Kill backward to the beginning of the line.
u\bun\bni\bix\bx-\b-l\bli\bin\bne\be-\b-d\bdi\bis\bsc\bca\bar\brd\bd (\b(C\bC-\b-u\bu)\b)
- Kill backward from point to the beginning of the line. The
+ Kill backward from point to the beginning of the line. The
killed text is saved on the kill-ring.
k\bki\bil\bll\bl-\b-w\bwh\bho\bol\ble\be-\b-l\bli\bin\bne\be
- Kill all characters on the current line, no matter where point
+ Kill all characters on the current line, no matter where point
is.
k\bki\bil\bll\bl-\b-w\bwo\bor\brd\bd (\b(M\bM-\b-d\bd)\b)
- Kill from point to the end of the current word, or if between
- words, to the end of the next word. Word boundaries are the
+ Kill from point to the end of the current word, or if between
+ words, to the end of the next word. Word boundaries are the
same as those used by f\bfo\bor\brw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd.
b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-k\bki\bil\bll\bl-\b-w\bwo\bor\brd\bd (\b(M\bM-\b-R\bRu\bub\bbo\bou\but\bt)\b)
- Kill the word behind point. Word boundaries are the same as
+ Kill the word behind point. Word boundaries are the same as
those used by b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd.
s\bsh\bhe\bel\bll\bl-\b-k\bki\bil\bll\bl-\b-w\bwo\bor\brd\bd
- Kill from point to the end of the current word, or if between
- words, to the end of the next word. Word boundaries are the
+ Kill from point to the end of the current word, or if between
+ words, to the end of the next word. Word boundaries are the
same as those used by s\bsh\bhe\bel\bll\bl-\b-f\bfo\bor\brw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd.
s\bsh\bhe\bel\bll\bl-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-k\bki\bil\bll\bl-\b-w\bwo\bor\brd\bd
- Kill the word behind point. Word boundaries are the same as
+ Kill the word behind point. Word boundaries are the same as
those used by s\bsh\bhe\bel\bll\bl-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd.
u\bun\bni\bix\bx-\b-w\bwo\bor\brd\bd-\b-r\bru\bub\bbo\bou\but\bt (\b(C\bC-\b-w\bw)\b)
- Kill the word behind point, using white space as a word bound-
+ Kill the word behind point, using white space as a word bound-
ary. The killed text is saved on the kill-ring.
u\bun\bni\bix\bx-\b-f\bfi\bil\ble\ben\bna\bam\bme\be-\b-r\bru\bub\bbo\bou\but\bt
- Kill the word behind point, using white space and the slash
- character as the word boundaries. The killed text is saved on
+ Kill the word behind point, using white space and the slash
+ character as the word boundaries. The killed text is saved on
the kill-ring.
d\bde\bel\ble\bet\bte\be-\b-h\bho\bor\bri\biz\bzo\bon\bnt\bta\bal\bl-\b-s\bsp\bpa\bac\bce\be (\b(M\bM-\b-\\b\)\b)
Delete all spaces and tabs around point.
c\bco\bop\bpy\by-\b-r\bre\beg\bgi\bio\bon\bn-\b-a\bas\bs-\b-k\bki\bil\bll\bl
Copy the text in the region to the kill buffer.
c\bco\bop\bpy\by-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd
- Copy the word before point to the kill buffer. The word bound-
+ Copy the word before point to the kill buffer. The word bound-
aries are the same as b\bba\bac\bck\bkw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd.
c\bco\bop\bpy\by-\b-f\bfo\bor\brw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd
- Copy the word following point to the kill buffer. The word
+ Copy the word following point to the kill buffer. The word
boundaries are the same as f\bfo\bor\brw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd.
y\bya\ban\bnk\bk (\b(C\bC-\b-y\by)\b)
Yank the top of the kill ring into the buffer at point.
y\bya\ban\bnk\bk-\b-p\bpo\bop\bp (\b(M\bM-\b-y\by)\b)
- Rotate the kill ring, and yank the new top. Only works follow-
+ Rotate the kill ring, and yank the new top. Only works follow-
ing y\bya\ban\bnk\bk or y\bya\ban\bnk\bk-\b-p\bpo\bop\bp.
N\bNu\bum\bme\ber\bri\bic\bc A\bAr\brg\bgu\bum\bme\ben\bnt\bts\bs
d\bdi\big\bgi\bit\bt-\b-a\bar\brg\bgu\bum\bme\ben\bnt\bt (\b(M\bM-\b-0\b0,\b, M\bM-\b-1\b1,\b, .\b..\b..\b.,\b, M\bM-\b--\b-)\b)
- Add this digit to the argument already accumulating, or start a
+ Add this digit to the argument already accumulating, or start a
new argument. M-- starts a negative argument.
u\bun\bni\biv\bve\ber\brs\bsa\bal\bl-\b-a\bar\brg\bgu\bum\bme\ben\bnt\bt
- This is another way to specify an argument. If this command is
- followed by one or more digits, optionally with a leading minus
- sign, those digits define the argument. If the command is fol-
+ This is another way to specify an argument. If this command is
+ followed by one or more digits, optionally with a leading minus
+ sign, those digits define the argument. If the command is fol-
lowed by digits, executing u\bun\bni\biv\bve\ber\brs\bsa\bal\bl-\b-a\bar\brg\bgu\bum\bme\ben\bnt\bt again ends the nu-
meric argument, but is otherwise ignored. As a special case, if
this command is immediately followed by a character that is nei-
- ther a digit nor minus sign, the argument count for the next
- command is multiplied by four. The argument count is initially
- one, so executing this function the first time makes the argu-
+ ther a digit nor minus sign, the argument count for the next
+ command is multiplied by four. The argument count is initially
+ one, so executing this function the first time makes the argu-
ment count four, a second time makes the argument count sixteen,
and so on.
C\bCo\bom\bmp\bpl\ble\bet\bti\bin\bng\bg
c\bco\bom\bmp\bpl\ble\bet\bte\be (\b(T\bTA\bAB\bB)\b)
- Attempt to perform completion on the text before point. B\bBa\bas\bsh\bh
+ Attempt to perform completion on the text before point. B\bBa\bas\bsh\bh
attempts completion treating the text as a variable (if the text
- begins with $\b$), username (if the text begins with ~\b~), hostname
- (if the text begins with @\b@), or command (including aliases and
+ begins with $\b$), username (if the text begins with ~\b~), hostname
+ (if the text begins with @\b@), or command (including aliases and
functions) in turn. If none of these produces a match, filename
completion is attempted.
p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs (\b(M\bM-\b-?\b?)\b)
List the possible completions of the text before point.
i\bin\bns\bse\ber\brt\bt-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs (\b(M\bM-\b-*\b*)\b)
- Insert all completions of the text before point that would have
+ Insert all completions of the text before point that would have
been generated by p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs.
m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be
- Similar to c\bco\bom\bmp\bpl\ble\bet\bte\be, but replaces the word to be completed with
- a single match from the list of possible completions. Repeated
- execution of m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be steps through the list of possible
- completions, inserting each match in turn. At the end of the
+ Similar to c\bco\bom\bmp\bpl\ble\bet\bte\be, but replaces the word to be completed with
+ a single match from the list of possible completions. Repeated
+ execution of m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be steps through the list of possible
+ completions, inserting each match in turn. At the end of the
list of completions, the bell is rung (subject to the setting of
b\bbe\bel\bll\bl-\b-s\bst\bty\byl\ble\be) and the original text is restored. An argument of _\bn
moves _\bn positions forward in the list of matches; a negative ar-
gument may be used to move backward through the list. This com-
mand is intended to be bound to T\bTA\bAB\bB, but is unbound by default.
m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd
- Identical to m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be, but moves backward through the list
- of possible completions, as if m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be had been given a
+ Identical to m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be, but moves backward through the list
+ of possible completions, as if m\bme\ben\bnu\bu-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be had been given a
negative argument. This command is unbound by default.
d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br-\b-o\bor\br-\b-l\bli\bis\bst\bt
- Deletes the character under the cursor if not at the beginning
- or end of the line (like d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br). If at the end of the
+ Deletes the character under the cursor if not at the beginning
+ or end of the line (like d\bde\bel\ble\bet\bte\be-\b-c\bch\bha\bar\br). If at the end of the
line, behaves identically to p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs. This command
is unbound by default.
c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-f\bfi\bil\ble\ben\bna\bam\bme\be (\b(M\bM-\b-/\b/)\b)
List the possible completions of the text before point, treating
it as a filename.
c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-u\bus\bse\ber\brn\bna\bam\bme\be (\b(M\bM-\b-~\b~)\b)
- Attempt completion on the text before point, treating it as a
+ Attempt completion on the text before point, treating it as a
username.
p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-u\bus\bse\ber\brn\bna\bam\bme\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs (\b(C\bC-\b-x\bx ~\b~)\b)
List the possible completions of the text before point, treating
it as a username.
c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-v\bva\bar\bri\bia\bab\bbl\ble\be (\b(M\bM-\b-$\b$)\b)
- Attempt completion on the text before point, treating it as a
+ Attempt completion on the text before point, treating it as a
shell variable.
p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-v\bva\bar\bri\bia\bab\bbl\ble\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs (\b(C\bC-\b-x\bx $\b$)\b)
List the possible completions of the text before point, treating
it as a shell variable.
c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-h\bho\bos\bst\btn\bna\bam\bme\be (\b(M\bM-\b-@\b@)\b)
- Attempt completion on the text before point, treating it as a
+ Attempt completion on the text before point, treating it as a
hostname.
p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-h\bho\bos\bst\btn\bna\bam\bme\be-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs (\b(C\bC-\b-x\bx @\b@)\b)
List the possible completions of the text before point, treating
it as a hostname.
c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-c\bco\bom\bmm\bma\ban\bnd\bd (\b(M\bM-\b-!\b!)\b)
- Attempt completion on the text before point, treating it as a
- command name. Command completion attempts to match the text
- against aliases, reserved words, shell functions, shell
+ Attempt completion on the text before point, treating it as a
+ command name. Command completion attempts to match the text
+ against aliases, reserved words, shell functions, shell
builtins, and finally executable filenames, in that order.
p\bpo\bos\bss\bsi\bib\bbl\ble\be-\b-c\bco\bom\bmm\bma\ban\bnd\bd-\b-c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bns\bs (\b(C\bC-\b-x\bx !\b!)\b)
List the possible completions of the text before point, treating
it as a command name.
d\bdy\byn\bna\bam\bmi\bic\bc-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-h\bhi\bis\bst\bto\bor\bry\by (\b(M\bM-\b-T\bTA\bAB\bB)\b)
- Attempt completion on the text before point, comparing the text
- against lines from the history list for possible completion
+ Attempt completion on the text before point, comparing the text
+ against lines from the history list for possible completion
matches.
d\bda\bab\bbb\bbr\bre\bev\bv-\b-e\bex\bxp\bpa\ban\bnd\bd
- Attempt menu completion on the text before point, comparing the
+ Attempt menu completion on the text before point, comparing the
text against lines from the history list for possible completion
matches.
c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-i\bin\bnt\bto\bo-\b-b\bbr\bra\bac\bce\bes\bs (\b(M\bM-\b-{\b{)\b)
Perform filename completion and insert the list of possible com-
- pletions enclosed within braces so the list is available to the
+ pletions enclosed within braces so the list is available to the
shell (see B\bBr\bra\bac\bce\be E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn above).
K\bKe\bey\byb\bbo\boa\bar\brd\bd M\bMa\bac\bcr\bro\bos\bs
s\bst\bta\bar\brt\bt-\b-k\bkb\bbd\bd-\b-m\bma\bac\bcr\bro\bo (\b(C\bC-\b-x\bx (\b()\b)
- Begin saving the characters typed into the current keyboard
+ Begin saving the characters typed into the current keyboard
macro.
e\ben\bnd\bd-\b-k\bkb\bbd\bd-\b-m\bma\bac\bcr\bro\bo (\b(C\bC-\b-x\bx )\b))\b)
Stop saving the characters typed into the current keyboard macro
and store the definition.
c\bca\bal\bll\bl-\b-l\bla\bas\bst\bt-\b-k\bkb\bbd\bd-\b-m\bma\bac\bcr\bro\bo (\b(C\bC-\b-x\bx e\be)\b)
- Re-execute the last keyboard macro defined, by making the char-
+ Re-execute the last keyboard macro defined, by making the char-
acters in the macro appear as if typed at the keyboard.
p\bpr\bri\bin\bnt\bt-\b-l\bla\bas\bst\bt-\b-k\bkb\bbd\bd-\b-m\bma\bac\bcr\bro\bo (\b()\b)
- Print the last keyboard macro defined in a format suitable for
+ Print the last keyboard macro defined in a format suitable for
the _\bi_\bn_\bp_\bu_\bt_\br_\bc file.
M\bMi\bis\bsc\bce\bel\bll\bla\ban\bne\beo\bou\bus\bs
r\bre\be-\b-r\bre\bea\bad\bd-\b-i\bin\bni\bit\bt-\b-f\bfi\bil\ble\be (\b(C\bC-\b-x\bx C\bC-\b-r\br)\b)
- Read in the contents of the _\bi_\bn_\bp_\bu_\bt_\br_\bc file, and incorporate any
+ Read in the contents of the _\bi_\bn_\bp_\bu_\bt_\br_\bc file, and incorporate any
bindings or variable assignments found there.
a\bab\bbo\bor\brt\bt (\b(C\bC-\b-g\bg)\b)
- Abort the current editing command and ring the terminal's bell
+ Abort the current editing command and ring the terminal's bell
(subject to the setting of b\bbe\bel\bll\bl-\b-s\bst\bty\byl\ble\be).
d\bdo\bo-\b-l\blo\bow\bwe\ber\brc\bca\bas\bse\be-\b-v\bve\ber\brs\bsi\bio\bon\bn (\b(M\bM-\b-A\bA,\b, M\bM-\b-B\bB,\b, M\bM-\b-_\bx,\b, .\b..\b..\b.)\b)
- If the metafied character _\bx is uppercase, run the command that
+ If the metafied character _\bx is uppercase, run the command that
is bound to the corresponding metafied lowercase character. The
behavior is undefined if _\bx is already lowercase.
p\bpr\bre\bef\bfi\bix\bx-\b-m\bme\bet\bta\ba (\b(E\bES\bSC\bC)\b)
u\bun\bnd\bdo\bo (\b(C\bC-\b-_\b_,\b, C\bC-\b-x\bx C\bC-\b-u\bu)\b)
Incremental undo, separately remembered for each line.
r\bre\bev\bve\ber\brt\bt-\b-l\bli\bin\bne\be (\b(M\bM-\b-r\br)\b)
- Undo all changes made to this line. This is like executing the
- u\bun\bnd\bdo\bo command enough times to return the line to its initial
+ Undo all changes made to this line. This is like executing the
+ u\bun\bnd\bdo\bo command enough times to return the line to its initial
state.
t\bti\bil\bld\bde\be-\b-e\bex\bxp\bpa\ban\bnd\bd (\b(M\bM-\b-&\b&)\b)
Perform tilde expansion on the current word.
s\bse\bet\bt-\b-m\bma\bar\brk\bk (\b(C\bC-\b-@\b@,\b, M\bM-\b-<\b<s\bsp\bpa\bac\bce\be>\b>)\b)
- Set the mark to the point. If a numeric argument is supplied,
+ Set the mark to the point. If a numeric argument is supplied,
the mark is set to that position.
e\bex\bxc\bch\bha\ban\bng\bge\be-\b-p\bpo\boi\bin\bnt\bt-\b-a\ban\bnd\bd-\b-m\bma\bar\brk\bk (\b(C\bC-\b-x\bx C\bC-\b-x\bx)\b)
- Swap the point with the mark. The current cursor position is
- set to the saved position, and the old cursor position is saved
+ Swap the point with the mark. The current cursor position is
+ set to the saved position, and the old cursor position is saved
as the mark.
c\bch\bha\bar\bra\bac\bct\bte\ber\br-\b-s\bse\bea\bar\brc\bch\bh (\b(C\bC-\b-]\b])\b)
A character is read and point is moved to the next occurrence of
- that character. A negative argument searches for previous oc-
+ that character. A negative argument searches for previous oc-
currences.
c\bch\bha\bar\bra\bac\bct\bte\ber\br-\b-s\bse\bea\bar\brc\bch\bh-\b-b\bba\bac\bck\bkw\bwa\bar\brd\bd (\b(M\bM-\b-C\bC-\b-]\b])\b)
- A character is read and point is moved to the previous occur-
- rence of that character. A negative argument searches for sub-
+ A character is read and point is moved to the previous occur-
+ rence of that character. A negative argument searches for sub-
sequent occurrences.
s\bsk\bki\bip\bp-\b-c\bcs\bsi\bi-\b-s\bse\beq\bqu\bue\ben\bnc\bce\be
- Read enough characters to consume a multi-key sequence such as
- those defined for keys like Home and End. Such sequences begin
+ Read enough characters to consume a multi-key sequence such as
+ those defined for keys like Home and End. Such sequences begin
with a Control Sequence Indicator (CSI), usually ESC-[. If this
- sequence is bound to "\[", keys producing such sequences will
- have no effect unless explicitly bound to a readline command,
- instead of inserting stray characters into the editing buffer.
+ sequence is bound to "\[", keys producing such sequences will
+ have no effect unless explicitly bound to a readline command,
+ instead of inserting stray characters into the editing buffer.
This is unbound by default, but usually bound to ESC-[.
i\bin\bns\bse\ber\brt\bt-\b-c\bco\bom\bmm\bme\ben\bnt\bt (\b(M\bM-\b-#\b#)\b)
- Without a numeric argument, the value of the readline c\bco\bom\bm-\b-
- m\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn variable is inserted at the beginning of the current
+ Without a numeric argument, the value of the readline c\bco\bom\bm-\b-
+ m\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn variable is inserted at the beginning of the current
line. If a numeric argument is supplied, this command acts as a
- toggle: if the characters at the beginning of the line do not
- match the value of c\bco\bom\bmm\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn, the value is inserted, other-
+ toggle: if the characters at the beginning of the line do not
+ match the value of c\bco\bom\bmm\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn, the value is inserted, other-
wise the characters in c\bco\bom\bmm\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn are deleted from the begin-
- ning of the line. In either case, the line is accepted as if a
- newline had been typed. The default value of c\bco\bom\bmm\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn
- causes this command to make the current line a shell comment.
- If a numeric argument causes the comment character to be re-
+ ning of the line. In either case, the line is accepted as if a
+ newline had been typed. The default value of c\bco\bom\bmm\bme\ben\bnt\bt-\b-b\bbe\beg\bgi\bin\bn
+ causes this command to make the current line a shell comment.
+ If a numeric argument causes the comment character to be re-
moved, the line will be executed by the shell.
s\bsp\bpe\bel\bll\bl-\b-c\bco\bor\brr\bre\bec\bct\bt-\b-w\bwo\bor\brd\bd (\b(C\bC-\b-x\bx s\bs)\b)
- Perform spelling correction on the current word, treating it as
- a directory or filename, in the same way as the c\bcd\bds\bsp\bpe\bel\bll\bl shell
- option. Word boundaries are the same as those used by
+ Perform spelling correction on the current word, treating it as
+ a directory or filename, in the same way as the c\bcd\bds\bsp\bpe\bel\bll\bl shell
+ option. Word boundaries are the same as those used by
s\bsh\bhe\bel\bll\bl-\b-f\bfo\bor\brw\bwa\bar\brd\bd-\b-w\bwo\bor\brd\bd.
g\bgl\blo\bob\bb-\b-c\bco\bom\bmp\bpl\ble\bet\bte\be-\b-w\bwo\bor\brd\bd (\b(M\bM-\b-g\bg)\b)
- The word before point is treated as a pattern for pathname ex-
- pansion, with an asterisk implicitly appended. This pattern is
- used to generate a list of matching filenames for possible com-
+ The word before point is treated as a pattern for pathname ex-
+ pansion, with an asterisk implicitly appended. This pattern is
+ used to generate a list of matching filenames for possible com-
pletions.
g\bgl\blo\bob\bb-\b-e\bex\bxp\bpa\ban\bnd\bd-\b-w\bwo\bor\brd\bd (\b(C\bC-\b-x\bx *\b*)\b)
- The word before point is treated as a pattern for pathname ex-
+ The word before point is treated as a pattern for pathname ex-
pansion, and the list of matching filenames is inserted, replac-
ing the word. If a numeric argument is supplied, an asterisk is
appended before pathname expansion.
g\bgl\blo\bob\bb-\b-l\bli\bis\bst\bt-\b-e\bex\bxp\bpa\ban\bns\bsi\bio\bon\bns\bs (\b(C\bC-\b-x\bx g\bg)\b)
- The list of expansions that would have been generated by
- g\bgl\blo\bob\bb-\b-e\bex\bxp\bpa\ban\bnd\bd-\b-w\bwo\bor\brd\bd is displayed, and the line is redrawn. If a
- numeric argument is supplied, an asterisk is appended before
+ The list of expansions that would have been generated by
+ g\bgl\blo\bob\bb-\b-e\bex\bxp\bpa\ban\bnd\bd-\b-w\bwo\bor\brd\bd is displayed, and the line is redrawn. If a
+ numeric argument is supplied, an asterisk is appended before
pathname expansion.
d\bdu\bum\bmp\bp-\b-f\bfu\bun\bnc\bct\bti\bio\bon\bns\bs
- Print all of the functions and their key bindings to the read-
+ Print all of the functions and their key bindings to the read-
line output stream. If a numeric argument is supplied, the out-
- put is formatted in such a way that it can be made part of an
+ put is formatted in such a way that it can be made part of an
_\bi_\bn_\bp_\bu_\bt_\br_\bc file.
d\bdu\bum\bmp\bp-\b-v\bva\bar\bri\bia\bab\bbl\ble\bes\bs
Print all of the settable readline variables and their values to
- the readline output stream. If a numeric argument is supplied,
- the output is formatted in such a way that it can be made part
+ the readline output stream. If a numeric argument is supplied,
+ the output is formatted in such a way that it can be made part
of an _\bi_\bn_\bp_\bu_\bt_\br_\bc file.
d\bdu\bum\bmp\bp-\b-m\bma\bac\bcr\bro\bos\bs
- Print all of the readline key sequences bound to macros and the
- strings they output. If a numeric argument is supplied, the
+ Print all of the readline key sequences bound to macros and the
+ strings they output. If a numeric argument is supplied, the
output is formatted in such a way that it can be made part of an
_\bi_\bn_\bp_\bu_\bt_\br_\bc file.
d\bdi\bis\bsp\bpl\bla\bay\by-\b-s\bsh\bhe\bel\bll\bl-\b-v\bve\ber\brs\bsi\bio\bon\bn (\b(C\bC-\b-x\bx C\bC-\b-v\bv)\b)
Display version information about the current instance of b\bba\bas\bsh\bh.
P\bPr\bro\bog\bgr\bra\bam\bmm\bma\bab\bbl\ble\be C\bCo\bom\bmp\bpl\ble\bet\bti\bio\bon\bn
- When word completion is attempted for an argument to a command for
- which a completion specification (a _\bc_\bo_\bm_\bp_\bs_\bp_\be_\bc) has been defined using
- the c\bco\bom\bmp\bpl\ble\bet\bte\be builtin (see S\bSH\bHE\bEL\bLL\bL B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS below), the program-
+ When word completion is attempted for an argument to a command for
+ which a completion specification (a _\bc_\bo_\bm_\bp_\bs_\bp_\be_\bc) has been defined using
+ the c\bco\bom\bmp\bpl\ble\bet\bte\be builtin (see S\bSH\bHE\bEL\bLL\bL B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS below), the program-
mable completion facilities are invoked.
- First, the command name is identified. If the command word is the
- empty string (completion attempted at the beginning of an empty line),
- any compspec defined with the -\b-E\bE option to c\bco\bom\bmp\bpl\ble\bet\bte\be is used. If a
- compspec has been defined for that command, the compspec is used to
+ First, the command name is identified. If the command word is the
+ empty string (completion attempted at the beginning of an empty line),
+ any compspec defined with the -\b-E\bE option to c\bco\bom\bmp\bpl\ble\bet\bte\be is used. If a
+ compspec has been defined for that command, the compspec is used to
generate the list of possible completions for the word. If the command
- word is a full pathname, a compspec for the full pathname is searched
- for first. If no compspec is found for the full pathname, an attempt
- is made to find a compspec for the portion following the final slash.
- If those searches do not result in a compspec, any compspec defined
- with the -\b-D\bD option to c\bco\bom\bmp\bpl\ble\bet\bte\be is used as the default. If there is no
- default compspec, b\bba\bas\bsh\bh attempts alias expansion on the command word as
- a final resort, and attempts to find a compspec for the command word
+ word is a full pathname, a compspec for the full pathname is searched
+ for first. If no compspec is found for the full pathname, an attempt
+ is made to find a compspec for the portion following the final slash.
+ If those searches do not result in a compspec, any compspec defined
+ with the -\b-D\bD option to c\bco\bom\bmp\bpl\ble\bet\bte\be is used as the default. If there is no
+ default compspec, b\bba\bas\bsh\bh attempts alias expansion on the command word as
+ a final resort, and attempts to find a compspec for the command word
from any successful expansion.
- Once a compspec has been found, it is used to generate the list of
- matching words. If a compspec is not found, the default b\bba\bas\bsh\bh comple-
+ Once a compspec has been found, it is used to generate the list of
+ matching words. If a compspec is not found, the default b\bba\bas\bsh\bh comple-
tion as described above under C\bCo\bom\bmp\bpl\ble\bet\bti\bin\bng\bg is performed.
- First, the actions specified by the compspec are used. Only matches
- which are prefixed by the word being completed are returned. When the
- -\b-f\bf or -\b-d\bd option is used for filename or directory name completion, the
+ First, the actions specified by the compspec are used. Only matches
+ which are prefixed by the word being completed are returned. When the
+ -\b-f\bf or -\b-d\bd option is used for filename or directory name completion, the
shell variable F\bFI\bIG\bGN\bNO\bOR\bRE\bE is used to filter the matches.
Any completions specified by a pathname expansion pattern to the -\b-G\bG op-
- tion are generated next. The words generated by the pattern need not
- match the word being completed. The G\bGL\bLO\bOB\bBI\bIG\bGN\bNO\bOR\bRE\bE shell variable is not
+ tion are generated next. The words generated by the pattern need not
+ match the word being completed. The G\bGL\bLO\bOB\bBI\bIG\bGN\bNO\bOR\bRE\bE shell variable is not
used to filter the matches, but the F\bFI\bIG\bGN\bNO\bOR\bRE\bE variable is used.
- Next, the string specified as the argument to the -\b-W\bW option is consid-
- ered. The string is first split using the characters in the I\bIF\bFS\bS spe-
- cial variable as delimiters. Shell quoting is honored. Each word is
- then expanded using brace expansion, tilde expansion, parameter and
- variable expansion, command substitution, and arithmetic expansion, as
+ Next, the string specified as the argument to the -\b-W\bW option is consid-
+ ered. The string is first split using the characters in the I\bIF\bFS\bS spe-
+ cial variable as delimiters. Shell quoting is honored. Each word is
+ then expanded using brace expansion, tilde expansion, parameter and
+ variable expansion, command substitution, and arithmetic expansion, as
described above under E\bEX\bXP\bPA\bAN\bNS\bSI\bIO\bON\bN. The results are split using the rules
described above under W\bWo\bor\brd\bd S\bSp\bpl\bli\bit\btt\bti\bin\bng\bg. The results of the expansion are
prefix-matched against the word being completed, and the matching words
become the possible completions.
- After these matches have been generated, any shell function or command
- specified with the -\b-F\bF and -\b-C\bC options is invoked. When the command or
+ After these matches have been generated, any shell function or command
+ specified with the -\b-F\bF and -\b-C\bC options is invoked. When the command or
function is invoked, the C\bCO\bOM\bMP\bP_\b_L\bLI\bIN\bNE\bE, C\bCO\bOM\bMP\bP_\b_P\bPO\bOI\bIN\bNT\bT, C\bCO\bOM\bMP\bP_\b_K\bKE\bEY\bY, and C\bCO\bOM\bMP\bP_\b_T\bTY\bYP\bPE\bE
variables are assigned values as described above under S\bSh\bhe\bel\bll\bl V\bVa\bar\bri\bia\bab\bbl\ble\bes\bs.
- If a shell function is being invoked, the C\bCO\bOM\bMP\bP_\b_W\bWO\bOR\bRD\bDS\bS and C\bCO\bOM\bMP\bP_\b_C\bCW\bWO\bOR\bRD\bD
- variables are also set. When the function or command is invoked, the
- first argument ($\b$1\b1) is the name of the command whose arguments are be-
- ing completed, the second argument ($\b$2\b2) is the word being completed,
- and the third argument ($\b$3\b3) is the word preceding the word being com-
+ If a shell function is being invoked, the C\bCO\bOM\bMP\bP_\b_W\bWO\bOR\bRD\bDS\bS and C\bCO\bOM\bMP\bP_\b_C\bCW\bWO\bOR\bRD\bD
+ variables are also set. When the function or command is invoked, the
+ first argument ($\b$1\b1) is the name of the command whose arguments are be-
+ ing completed, the second argument ($\b$2\b2) is the word being completed,
+ and the third argument ($\b$3\b3) is the word preceding the word being com-
pleted on the current command line. No filtering of the generated com-
pletions against the word being completed is performed; the function or
command has complete freedom in generating the matches.
- Any function specified with -\b-F\bF is invoked first. The function may use
- any of the shell facilities, including the c\bco\bom\bmp\bpg\bge\ben\bn builtin described
- below, to generate the matches. It must put the possible completions
+ Any function specified with -\b-F\bF is invoked first. The function may use
+ any of the shell facilities, including the c\bco\bom\bmp\bpg\bge\ben\bn builtin described
+ below, to generate the matches. It must put the possible completions
in the C\bCO\bOM\bMP\bPR\bRE\bEP\bPL\bLY\bY array variable, one per array element.
- Next, any command specified with the -\b-C\bC option is invoked in an envi-
- ronment equivalent to command substitution. It should print a list of
- completions, one per line, to the standard output. Backslash may be
+ Next, any command specified with the -\b-C\bC option is invoked in an envi-
+ ronment equivalent to command substitution. It should print a list of
+ completions, one per line, to the standard output. Backslash may be
used to escape a newline, if necessary.
- After all of the possible completions are generated, any filter speci-
- fied with the -\b-X\bX option is applied to the list. The filter is a pat-
- tern as used for pathname expansion; a &\b& in the pattern is replaced
- with the text of the word being completed. A literal &\b& may be escaped
- with a backslash; the backslash is removed before attempting a match.
- Any completion that matches the pattern will be removed from the list.
+ After all of the possible completions are generated, any filter speci-
+ fied with the -\b-X\bX option is applied to the list. The filter is a pat-
+ tern as used for pathname expansion; a &\b& in the pattern is replaced
+ with the text of the word being completed. A literal &\b& may be escaped
+ with a backslash; the backslash is removed before attempting a match.
+ Any completion that matches the pattern will be removed from the list.
A leading !\b! negates the pattern; in this case any completion not match-
- ing the pattern will be removed. If the n\bno\boc\bca\bas\bse\bem\bma\bat\btc\bch\bh shell option is
- enabled, the match is performed without regard to the case of alpha-
+ ing the pattern will be removed. If the n\bno\boc\bca\bas\bse\bem\bma\bat\btc\bch\bh shell option is
+ enabled, the match is performed without regard to the case of alpha-
betic characters.
Finally, any prefix and suffix specified with the -\b-P\bP and -\b-S\bS options are
added to each member of the completion list, and the result is returned
to the readline completion code as the list of possible completions.
- If the previously-applied actions do not generate any matches, and the
- -\b-o\bo d\bdi\bir\brn\bna\bam\bme\bes\bs option was supplied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec was de-
+ If the previously-applied actions do not generate any matches, and the
+ -\b-o\bo d\bdi\bir\brn\bna\bam\bme\bes\bs option was supplied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec was de-
fined, directory name completion is attempted.
- If the -\b-o\bo p\bpl\blu\bus\bsd\bdi\bir\brs\bs option was supplied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec
+ If the -\b-o\bo p\bpl\blu\bus\bsd\bdi\bir\brs\bs option was supplied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec
was defined, directory name completion is attempted and any matches are
added to the results of the other actions.
- By default, if a compspec is found, whatever it generates is returned
- to the completion code as the full set of possible completions. The
+ By default, if a compspec is found, whatever it generates is returned
+ to the completion code as the full set of possible completions. The
default b\bba\bas\bsh\bh completions are not attempted, and the readline default of
filename completion is disabled. If the -\b-o\bo b\bba\bas\bsh\bhd\bde\bef\bfa\bau\bul\blt\bt option was sup-
- plied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec was defined, the b\bba\bas\bsh\bh default com-
+ plied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec was defined, the b\bba\bas\bsh\bh default com-
pletions are attempted if the compspec generates no matches. If the -\b-o\bo
- d\bde\bef\bfa\bau\bul\blt\bt option was supplied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec was defined,
- readline's default completion will be performed if the compspec (and,
+ d\bde\bef\bfa\bau\bul\blt\bt option was supplied to c\bco\bom\bmp\bpl\ble\bet\bte\be when the compspec was defined,
+ readline's default completion will be performed if the compspec (and,
if attempted, the default b\bba\bas\bsh\bh completions) generate no matches.
- When a compspec indicates that directory name completion is desired,
- the programmable completion functions force readline to append a slash
- to completed names which are symbolic links to directories, subject to
- the value of the m\bma\bar\brk\bk-\b-d\bdi\bir\bre\bec\bct\bto\bor\bri\bie\bes\bs readline variable, regardless of the
+ When a compspec indicates that directory name completion is desired,
+ the programmable completion functions force readline to append a slash
+ to completed names which are symbolic links to directories, subject to
+ the value of the m\bma\bar\brk\bk-\b-d\bdi\bir\bre\bec\bct\bto\bor\bri\bie\bes\bs readline variable, regardless of the
setting of the m\bma\bar\brk\bk-\b-s\bsy\bym\bml\bli\bin\bnk\bke\bed\bd-\b-d\bdi\bir\bre\bec\bct\bto\bor\bri\bie\bes\bs readline variable.
- There is some support for dynamically modifying completions. This is
- most useful when used in combination with a default completion speci-
- fied with c\bco\bom\bmp\bpl\ble\bet\bte\be -\b-D\bD. It's possible for shell functions executed as
- completion handlers to indicate that completion should be retried by
- returning an exit status of 124. If a shell function returns 124, and
+ There is some support for dynamically modifying completions. This is
+ most useful when used in combination with a default completion speci-
+ fied with c\bco\bom\bmp\bpl\ble\bet\bte\be -\b-D\bD. It's possible for shell functions executed as
+ completion handlers to indicate that completion should be retried by
+ returning an exit status of 124. If a shell function returns 124, and
changes the compspec associated with the command on which completion is
- being attempted (supplied as the first argument when the function is
+ being attempted (supplied as the first argument when the function is
executed), programmable completion restarts from the beginning, with an
- attempt to find a new compspec for that command. This allows a set of
- completions to be built dynamically as completion is attempted, rather
+ attempt to find a new compspec for that command. This allows a set of
+ completions to be built dynamically as completion is attempted, rather
than being loaded all at once.
- For instance, assuming that there is a library of compspecs, each kept
- in a file corresponding to the name of the command, the following de-
+ For instance, assuming that there is a library of compspecs, each kept
+ in a file corresponding to the name of the command, the following de-
fault completion function would load completions dynamically:
_completion_loader()
H\bHI\bIS\bST\bTO\bOR\bRY\bY
- When the -\b-o\bo h\bhi\bis\bst\bto\bor\bry\by option to the s\bse\bet\bt builtin is enabled, the shell
+ When the -\b-o\bo h\bhi\bis\bst\bto\bor\bry\by option to the s\bse\bet\bt builtin is enabled, the shell
provides access to the _\bc_\bo_\bm_\bm_\ba_\bn_\bd _\bh_\bi_\bs_\bt_\bo_\br_\by, the list of commands previously
- typed. The value of the H\bHI\bIS\bST\bTS\bSI\bIZ\bZE\bE variable is used as the number of
+ typed. The value of the H\bHI\bIS\bST\bTS\bSI\bIZ\bZE\bE variable is used as the number of
commands to save in a history list. The text of the last H\bHI\bIS\bST\bTS\bSI\bIZ\bZE\bE com-
- mands (default 500) is saved. The shell stores each command in the
- history list prior to parameter and variable expansion (see E\bEX\bXP\bPA\bAN\bNS\bSI\bIO\bON\bN
- above) but after history expansion is performed, subject to the values
+ mands (default 500) is saved. The shell stores each command in the
+ history list prior to parameter and variable expansion (see E\bEX\bXP\bPA\bAN\bNS\bSI\bIO\bON\bN
+ above) but after history expansion is performed, subject to the values
of the shell variables H\bHI\bIS\bST\bTI\bIG\bGN\bNO\bOR\bRE\bE and H\bHI\bIS\bST\bTC\bCO\bON\bNT\bTR\bRO\bOL\bL.
On startup, the history is initialized from the file named by the vari-
- able H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE (default _\b~_\b/_\b._\bb_\ba_\bs_\bh_\b__\bh_\bi_\bs_\bt_\bo_\br_\by). The file named by the value
- of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE is truncated, if necessary, to contain no more than the
- number of lines specified by the value of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bES\bSI\bIZ\bZE\bE. If H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE-\b-
- S\bSI\bIZ\bZE\bE is unset, or set to null, a non-numeric value, or a numeric value
- less than zero, the history file is not truncated. When the history
- file is read, lines beginning with the history comment character fol-
+ able H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE (default _\b~_\b/_\b._\bb_\ba_\bs_\bh_\b__\bh_\bi_\bs_\bt_\bo_\br_\by). The file named by the value
+ of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE is truncated, if necessary, to contain no more than the
+ number of lines specified by the value of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bES\bSI\bIZ\bZE\bE. If H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE-\b-
+ S\bSI\bIZ\bZE\bE is unset, or set to null, a non-numeric value, or a numeric value
+ less than zero, the history file is not truncated. When the history
+ file is read, lines beginning with the history comment character fol-
lowed immediately by a digit are interpreted as timestamps for the fol-
lowing history line. These timestamps are optionally displayed depend-
- ing on the value of the H\bHI\bIS\bST\bTT\bTI\bIM\bME\bEF\bFO\bOR\bRM\bMA\bAT\bT variable. When a shell with
- history enabled exits, the last $\b$H\bHI\bIS\bST\bTS\bSI\bIZ\bZE\bE lines are copied from the
- history list to $\b$H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE. If the h\bhi\bis\bst\bta\bap\bpp\bpe\ben\bnd\bd shell option is enabled
- (see the description of s\bsh\bho\bop\bpt\bt under S\bSH\bHE\bEL\bLL\bL B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS below), the
- lines are appended to the history file, otherwise the history file is
- overwritten. If H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE is unset, or if the history file is un-
- writable, the history is not saved. If the H\bHI\bIS\bST\bTT\bTI\bIM\bME\bEF\bFO\bOR\bRM\bMA\bAT\bT variable is
- set, time stamps are written to the history file, marked with the his-
+ ing on the value of the H\bHI\bIS\bST\bTT\bTI\bIM\bME\bEF\bFO\bOR\bRM\bMA\bAT\bT variable. When a shell with
+ history enabled exits, the last $\b$H\bHI\bIS\bST\bTS\bSI\bIZ\bZE\bE lines are copied from the
+ history list to $\b$H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE. If the h\bhi\bis\bst\bta\bap\bpp\bpe\ben\bnd\bd shell option is enabled
+ (see the description of s\bsh\bho\bop\bpt\bt under S\bSH\bHE\bEL\bLL\bL B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS below), the
+ lines are appended to the history file, otherwise the history file is
+ overwritten. If H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE is unset, or if the history file is un-
+ writable, the history is not saved. If the H\bHI\bIS\bST\bTT\bTI\bIM\bME\bEF\bFO\bOR\bRM\bMA\bAT\bT variable is
+ set, time stamps are written to the history file, marked with the his-
tory comment character, so they may be preserved across shell sessions.
- This uses the history comment character to distinguish timestamps from
- other history lines. After saving the history, the history file is
- truncated to contain no more than H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bES\bSI\bIZ\bZE\bE lines. If H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bES\bSI\bIZ\bZE\bE
- is unset, or set to null, a non-numeric value, or a numeric value less
+ This uses the history comment character to distinguish timestamps from
+ other history lines. After saving the history, the history file is
+ truncated to contain no more than H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bES\bSI\bIZ\bZE\bE lines. If H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bES\bSI\bIZ\bZE\bE
+ is unset, or set to null, a non-numeric value, or a numeric value less
than zero, the history file is not truncated.
- The builtin command f\bfc\bc (see S\bSH\bHE\bEL\bLL\bL B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS below) may be used
+ The builtin command f\bfc\bc (see S\bSH\bHE\bEL\bLL\bL B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS below) may be used
to list or edit and re-execute a portion of the history list. The h\bhi\bis\bs-\b-
- t\bto\bor\bry\by builtin may be used to display or modify the history list and ma-
- nipulate the history file. When using command-line editing, search
- commands are available in each editing mode that provide access to the
+ t\bto\bor\bry\by builtin may be used to display or modify the history list and ma-
+ nipulate the history file. When using command-line editing, search
+ commands are available in each editing mode that provide access to the
history list.
- The shell allows control over which commands are saved on the history
+ The shell allows control over which commands are saved on the history
list. The H\bHI\bIS\bST\bTC\bCO\bON\bNT\bTR\bRO\bOL\bL and H\bHI\bIS\bST\bTI\bIG\bGN\bNO\bOR\bRE\bE variables may be set to cause the
shell to save only a subset of the commands entered. The c\bcm\bmd\bdh\bhi\bis\bst\bt shell
- option, if enabled, causes the shell to attempt to save each line of a
- multi-line command in the same history entry, adding semicolons where
- necessary to preserve syntactic correctness. The l\bli\bit\bth\bhi\bis\bst\bt shell option
- causes the shell to save the command with embedded newlines instead of
+ option, if enabled, causes the shell to attempt to save each line of a
+ multi-line command in the same history entry, adding semicolons where
+ necessary to preserve syntactic correctness. The l\bli\bit\bth\bhi\bis\bst\bt shell option
+ causes the shell to save the command with embedded newlines instead of
semicolons. See the description of the s\bsh\bho\bop\bpt\bt builtin below under S\bSH\bHE\bEL\bLL\bL
- B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS for information on setting and unsetting shell op-
+ B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS for information on setting and unsetting shell op-
tions.
H\bHI\bIS\bST\bTO\bOR\bRY\bY E\bEX\bXP\bPA\bAN\bNS\bSI\bIO\bON\bN
- The shell supports a history expansion feature that is similar to the
- history expansion in c\bcs\bsh\bh. This section describes what syntax features
- are available. This feature is enabled by default for interactive
+ The shell supports a history expansion feature that is similar to the
+ history expansion in c\bcs\bsh\bh. This section describes what syntax features
+ are available. This feature is enabled by default for interactive
shells, and can be disabled using the +\b+H\bH option to the s\bse\bet\bt builtin com-
mand (see S\bSH\bHE\bEL\bLL\bL B\bBU\bUI\bIL\bLT\bTI\bIN\bN C\bCO\bOM\bMM\bMA\bAN\bND\bDS\bS below). Non-interactive shells do not
perform history expansion by default.
History expansions introduce words from the history list into the input
- stream, making it easy to repeat commands, insert the arguments to a
+ stream, making it easy to repeat commands, insert the arguments to a
previous command into the current input line, or fix errors in previous
commands quickly.
- History expansion is performed immediately after a complete line is
- read, before the shell breaks it into words, and is performed on each
- line individually without taking quoting on previous lines into ac-
- count. It takes place in two parts. The first is to determine which
- line from the history list to use during substitution. The second is
- to select portions of that line for inclusion into the current one.
- The line selected from the history is the _\be_\bv_\be_\bn_\bt, and the portions of
- that line that are acted upon are _\bw_\bo_\br_\bd_\bs. Various _\bm_\bo_\bd_\bi_\bf_\bi_\be_\br_\bs are avail-
- able to manipulate the selected words. The line is broken into words
- in the same fashion as when reading input, so that several _\bm_\be_\bt_\ba_\bc_\bh_\ba_\br_\ba_\bc_\b-
+ History expansion is performed immediately after a complete line is
+ read, before the shell breaks it into words, and is performed on each
+ line individually without taking quoting on previous lines into ac-
+ count. It takes place in two parts. The first is to determine which
+ line from the history list to use during substitution. The second is
+ to select portions of that line for inclusion into the current one.
+ The line selected from the history is the _\be_\bv_\be_\bn_\bt, and the portions of
+ that line that are acted upon are _\bw_\bo_\br_\bd_\bs. Various _\bm_\bo_\bd_\bi_\bf_\bi_\be_\br_\bs are avail-
+ able to manipulate the selected words. The line is broken into words
+ in the same fashion as when reading input, so that several _\bm_\be_\bt_\ba_\bc_\bh_\ba_\br_\ba_\bc_\b-
_\bt_\be_\br-separated words surrounded by quotes are considered one word. His-
- tory expansions are introduced by the appearance of the history expan-
- sion character, which is !\b! by default. Only backslash (\\b\) and single
- quotes can quote the history expansion character, but the history ex-
- pansion character is also treated as quoted if it immediately precedes
+ tory expansions are introduced by the appearance of the history expan-
+ sion character, which is !\b! by default. Only backslash (\\b\) and single
+ quotes can quote the history expansion character, but the history ex-
+ pansion character is also treated as quoted if it immediately precedes
the closing double quote in a double-quoted string.
- Several characters inhibit history expansion if found immediately fol-
- lowing the history expansion character, even if it is unquoted: space,
- tab, newline, carriage return, and =\b=. If the e\bex\bxt\btg\bgl\blo\bob\bb shell option is
+ Several characters inhibit history expansion if found immediately fol-
+ lowing the history expansion character, even if it is unquoted: space,
+ tab, newline, carriage return, and =\b=. If the e\bex\bxt\btg\bgl\blo\bob\bb shell option is
enabled, (\b( will also inhibit expansion.
- Several shell options settable with the s\bsh\bho\bop\bpt\bt builtin may be used to
- tailor the behavior of history expansion. If the h\bhi\bis\bst\btv\bve\ber\bri\bif\bfy\by shell op-
- tion is enabled (see the description of the s\bsh\bho\bop\bpt\bt builtin below), and
- r\bre\bea\bad\bdl\bli\bin\bne\be is being used, history substitutions are not immediately
- passed to the shell parser. Instead, the expanded line is reloaded
+ Several shell options settable with the s\bsh\bho\bop\bpt\bt builtin may be used to
+ tailor the behavior of history expansion. If the h\bhi\bis\bst\btv\bve\ber\bri\bif\bfy\by shell op-
+ tion is enabled (see the description of the s\bsh\bho\bop\bpt\bt builtin below), and
+ r\bre\bea\bad\bdl\bli\bin\bne\be is being used, history substitutions are not immediately
+ passed to the shell parser. Instead, the expanded line is reloaded
into the r\bre\bea\bad\bdl\bli\bin\bne\be editing buffer for further modification. If r\bre\bea\bad\bdl\bli\bin\bne\be
- is being used, and the h\bhi\bis\bst\btr\bre\bee\bed\bdi\bit\bt shell option is enabled, a failed
- history substitution will be reloaded into the r\bre\bea\bad\bdl\bli\bin\bne\be editing buffer
- for correction. The -\b-p\bp option to the h\bhi\bis\bst\bto\bor\bry\by builtin command may be
- used to see what a history expansion will do before using it. The -\b-s\bs
+ is being used, and the h\bhi\bis\bst\btr\bre\bee\bed\bdi\bit\bt shell option is enabled, a failed
+ history substitution will be reloaded into the r\bre\bea\bad\bdl\bli\bin\bne\be editing buffer
+ for correction. The -\b-p\bp option to the h\bhi\bis\bst\bto\bor\bry\by builtin command may be
+ used to see what a history expansion will do before using it. The -\b-s\bs
option to the h\bhi\bis\bst\bto\bor\bry\by builtin may be used to add commands to the end of
- the history list without actually executing them, so that they are
+ the history list without actually executing them, so that they are
available for subsequent recall.
- The shell allows control of the various characters used by the history
+ The shell allows control of the various characters used by the history
expansion mechanism (see the description of h\bhi\bis\bst\btc\bch\bha\bar\brs\bs above under S\bSh\bhe\bel\bll\bl
- V\bVa\bar\bri\bia\bab\bbl\ble\bes\bs). The shell uses the history comment character to mark his-
+ V\bVa\bar\bri\bia\bab\bbl\ble\bes\bs). The shell uses the history comment character to mark his-
tory timestamps when writing the history file.
E\bEv\bve\ben\bnt\bt D\bDe\bes\bsi\big\bgn\bna\bat\bto\bor\brs\bs
- An event designator is a reference to a command line entry in the his-
- tory list. Unless the reference is absolute, events are relative to
+ An event designator is a reference to a command line entry in the his-
+ tory list. Unless the reference is absolute, events are relative to
the current position in the history list.
- !\b! Start a history substitution, except when followed by a b\bbl\bla\ban\bnk\bk,
- newline, carriage return, = or ( (when the e\bex\bxt\btg\bgl\blo\bob\bb shell option
+ !\b! Start a history substitution, except when followed by a b\bbl\bla\ban\bnk\bk,
+ newline, carriage return, = or ( (when the e\bex\bxt\btg\bgl\blo\bob\bb shell option
is enabled using the s\bsh\bho\bop\bpt\bt builtin).
!\b!_\bn Refer to command line _\bn.
!\b!-\b-_\bn Refer to the current command minus _\bn.
!\b!!\b! Refer to the previous command. This is a synonym for `!-1'.
!\b!_\bs_\bt_\br_\bi_\bn_\bg
- Refer to the most recent command preceding the current position
+ Refer to the most recent command preceding the current position
in the history list starting with _\bs_\bt_\br_\bi_\bn_\bg.
!\b!?\b?_\bs_\bt_\br_\bi_\bn_\bg[\b[?\b?]\b]
- Refer to the most recent command preceding the current position
- in the history list containing _\bs_\bt_\br_\bi_\bn_\bg. The trailing ?\b? may be
- omitted if _\bs_\bt_\br_\bi_\bn_\bg is followed immediately by a newline. If
- _\bs_\bt_\br_\bi_\bn_\bg is missing, the string from the most recent search is
+ Refer to the most recent command preceding the current position
+ in the history list containing _\bs_\bt_\br_\bi_\bn_\bg. The trailing ?\b? may be
+ omitted if _\bs_\bt_\br_\bi_\bn_\bg is followed immediately by a newline. If
+ _\bs_\bt_\br_\bi_\bn_\bg is missing, the string from the most recent search is
used; it is an error if there is no previous search string.
^\b^_\bs_\bt_\br_\bi_\bn_\bg_\b1^\b^_\bs_\bt_\br_\bi_\bn_\bg_\b2^\b^
- Quick substitution. Repeat the previous command, replacing
- _\bs_\bt_\br_\bi_\bn_\bg_\b1 with _\bs_\bt_\br_\bi_\bn_\bg_\b2. Equivalent to ``!!:s^_\bs_\bt_\br_\bi_\bn_\bg_\b1^_\bs_\bt_\br_\bi_\bn_\bg_\b2^''
+ Quick substitution. Repeat the previous command, replacing
+ _\bs_\bt_\br_\bi_\bn_\bg_\b1 with _\bs_\bt_\br_\bi_\bn_\bg_\b2. Equivalent to ``!!:s^_\bs_\bt_\br_\bi_\bn_\bg_\b1^_\bs_\bt_\br_\bi_\bn_\bg_\b2^''
(see M\bMo\bod\bdi\bif\bfi\bie\ber\brs\bs below).
!\b!#\b# The entire command line typed so far.
W\bWo\bor\brd\bd D\bDe\bes\bsi\big\bgn\bna\bat\bto\bor\brs\bs
- Word designators are used to select desired words from the event. A :\b:
- separates the event specification from the word designator. It may be
- omitted if the word designator begins with a ^\b^, $\b$, *\b*, -\b-, or %\b%. Words
- are numbered from the beginning of the line, with the first word being
- denoted by 0 (zero). Words are inserted into the current line sepa-
+ Word designators are used to select desired words from the event. A :\b:
+ separates the event specification from the word designator. It may be
+ omitted if the word designator begins with a ^\b^, $\b$, *\b*, -\b-, or %\b%. Words
+ are numbered from the beginning of the line, with the first word being
+ denoted by 0 (zero). Words are inserted into the current line sepa-
rated by single spaces.
0\b0 (\b(z\bze\ber\bro\bo)\b)
The zeroth word. For the shell, this is the command word.
_\bn The _\bnth word.
^\b^ The first argument. That is, word 1.
- $\b$ The last word. This is usually the last argument, but will ex-
+ $\b$ The last word. This is usually the last argument, but will ex-
pand to the zeroth word if there is only one word in the line.
- %\b% The first word matched by the most recent `?_\bs_\bt_\br_\bi_\bn_\bg?' search, if
- the search string begins with a character that is part of a
+ %\b% The first word matched by the most recent `?_\bs_\bt_\br_\bi_\bn_\bg?' search, if
+ the search string begins with a character that is part of a
word.
_\bx-\b-_\by A range of words; `-_\by' abbreviates `0-_\by'.
- *\b* All of the words but the zeroth. This is a synonym for `_\b1_\b-_\b$'.
- It is not an error to use *\b* if there is just one word in the
+ *\b* All of the words but the zeroth. This is a synonym for `_\b1_\b-_\b$'.
+ It is not an error to use *\b* if there is just one word in the
event; the empty string is returned in that case.
x\bx*\b* Abbreviates _\bx_\b-_\b$.
x\bx-\b- Abbreviates _\bx_\b-_\b$ like x\bx*\b*, but omits the last word. If x\bx is miss-
ing, it defaults to 0.
- If a word designator is supplied without an event specification, the
+ If a word designator is supplied without an event specification, the
previous command is used as the event.
M\bMo\bod\bdi\bif\bfi\bie\ber\brs\bs
- After the optional word designator, there may appear a sequence of one
+ After the optional word designator, there may appear a sequence of one
or more of the following modifiers, each preceded by a `:'. These mod-
ify, or edit, the word or words selected from the history event.
e\be Remove all but the trailing suffix.
p\bp Print the new command but do not execute it.
q\bq Quote the substituted words, escaping further substitutions.
- x\bx Quote the substituted words as with q\bq, but break into words at
- b\bbl\bla\ban\bnk\bks\bs and newlines. The q\bq and x\bx modifiers are mutually exclu-
+ x\bx Quote the substituted words as with q\bq, but break into words at
+ b\bbl\bla\ban\bnk\bks\bs and newlines. The q\bq and x\bx modifiers are mutually exclu-
sive; the last one supplied is used.
s\bs/\b/_\bo_\bl_\bd/\b/_\bn_\be_\bw/\b/
- Substitute _\bn_\be_\bw for the first occurrence of _\bo_\bl_\bd in the event
+ Substitute _\bn_\be_\bw for the first occurrence of _\bo_\bl_\bd in the event
line. Any character may be used as the delimiter in place of /.
- The final delimiter is optional if it is the last character of
+ The final delimiter is optional if it is the last character of
the event line. The delimiter may be quoted in _\bo_\bl_\bd and _\bn_\be_\bw with
a single backslash. If & appears in _\bn_\be_\bw, it is replaced by _\bo_\bl_\bd.
- A single backslash will quote the &. If _\bo_\bl_\bd is null, it is set
- to the last _\bo_\bl_\bd substituted, or, if no previous history substi-
- tutions took place, the last _\bs_\bt_\br_\bi_\bn_\bg in a !\b!?\b?_\bs_\bt_\br_\bi_\bn_\bg[\b[?\b?]\b] search.
+ A single backslash will quote the &. If _\bo_\bl_\bd is null, it is set
+ to the last _\bo_\bl_\bd substituted, or, if no previous history substi-
+ tutions took place, the last _\bs_\bt_\br_\bi_\bn_\bg in a !\b!?\b?_\bs_\bt_\br_\bi_\bn_\bg[\b[?\b?]\b] search.
If _\bn_\be_\bw is null, each matching _\bo_\bl_\bd is deleted.
&\b& Repeat the previous substitution.
g\bg Cause changes to be applied over the entire event line. This is
- used in conjunction with `:\b:s\bs' (e.g., `:\b:g\bgs\bs/\b/_\bo_\bl_\bd/\b/_\bn_\be_\bw/\b/') or `:\b:&\b&'.
- If used with `:\b:s\bs', any delimiter can be used in place of /, and
- the final delimiter is optional if it is the last character of
+ used in conjunction with `:\b:s\bs' (e.g., `:\b:g\bgs\bs/\b/_\bo_\bl_\bd/\b/_\bn_\be_\bw/\b/') or `:\b:&\b&'.
+ If used with `:\b:s\bs', any delimiter can be used in place of /, and
+ the final delimiter is optional if it is the last character of
the event line. An a\ba may be used as a synonym for g\bg.
G\bG Apply the following `s\bs' or `&\b&' modifier once to each word in the
event line.
Unless otherwise noted, each builtin command documented in this section
as accepting options preceded by -\b- accepts -\b--\b- to signify the end of the
options. The :\b:, t\btr\bru\bue\be, f\bfa\bal\bls\bse\be, and t\bte\bes\bst\bt/[\b[ builtins do not accept options
- and do not treat -\b--\b- specially. The e\bex\bxi\bit\bt, l\blo\bog\bgo\bou\but\bt, r\bre\bet\btu\bur\brn\bn, b\bbr\bre\bea\bak\bk, c\bco\bon\bn-\b-
- t\bti\bin\bnu\bue\be, l\ble\bet\bt, and s\bsh\bhi\bif\bft\bt builtins accept and process arguments beginning
- with -\b- without requiring -\b--\b-. Other builtins that accept arguments but
- are not specified as accepting options interpret arguments beginning
- with -\b- as invalid options and require -\b--\b- to prevent this interpreta-
+ and do not treat -\b--\b- specially. The e\bex\bxi\bit\bt, l\blo\bog\bgo\bou\but\bt, r\bre\bet\btu\bur\brn\bn, b\bbr\bre\bea\bak\bk, c\bco\bon\bn-\b-
+ t\bti\bin\bnu\bue\be, l\ble\bet\bt, and s\bsh\bhi\bif\bft\bt builtins accept and process arguments beginning
+ with -\b- without requiring -\b--\b-. Other builtins that accept arguments but
+ are not specified as accepting options interpret arguments beginning
+ with -\b- as invalid options and require -\b--\b- to prevent this interpreta-
tion.
:\b: [_\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs]
- No effect; the command does nothing beyond expanding _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs
+ No effect; the command does nothing beyond expanding _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs
and performing any specified redirections. The return status is
zero.
.\b. _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be [_\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs]
s\bso\bou\bur\brc\bce\be _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be [_\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs]
Read and execute commands from _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be in the current shell en-
- vironment and return the exit status of the last command exe-
- cuted from _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be. If _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be does not contain a slash,
- filenames in P\bPA\bAT\bTH\bH are used to find the directory containing
+ vironment and return the exit status of the last command exe-
+ cuted from _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be. If _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be does not contain a slash,
+ filenames in P\bPA\bAT\bTH\bH are used to find the directory containing
_\bf_\bi_\bl_\be_\bn_\ba_\bm_\be, but _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be does not need to be executable. The file
- searched for in P\bPA\bAT\bTH\bH need not be executable. When b\bba\bas\bsh\bh is not
- in _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be, it searches the current directory if no file is
- found in P\bPA\bAT\bTH\bH. If the s\bso\bou\bur\brc\bce\bep\bpa\bat\bth\bh option to the s\bsh\bho\bop\bpt\bt builtin
- command is turned off, the P\bPA\bAT\bTH\bH is not searched. If any _\ba_\br_\bg_\bu_\b-
- _\bm_\be_\bn_\bt_\bs are supplied, they become the positional parameters when
- _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be is executed. Otherwise the positional parameters are
- unchanged. If the -\b-T\bT option is enabled, .\b. inherits any trap on
+ searched for in P\bPA\bAT\bTH\bH need not be executable. When b\bba\bas\bsh\bh is not
+ in _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be, it searches the current directory if no file is
+ found in P\bPA\bAT\bTH\bH. If the s\bso\bou\bur\brc\bce\bep\bpa\bat\bth\bh option to the s\bsh\bho\bop\bpt\bt builtin
+ command is turned off, the P\bPA\bAT\bTH\bH is not searched. If any _\ba_\br_\bg_\bu_\b-
+ _\bm_\be_\bn_\bt_\bs are supplied, they become the positional parameters when
+ _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be is executed. Otherwise the positional parameters are
+ unchanged. If the -\b-T\bT option is enabled, .\b. inherits any trap on
D\bDE\bEB\bBU\bUG\bG; if it is not, any D\bDE\bEB\bBU\bUG\bG trap string is saved and restored
- around the call to .\b., and .\b. unsets the D\bDE\bEB\bBU\bUG\bG trap while it exe-
+ around the call to .\b., and .\b. unsets the D\bDE\bEB\bBU\bUG\bG trap while it exe-
cutes. If -\b-T\bT is not set, and the sourced file changes the D\bDE\bEB\bBU\bUG\bG
- trap, the new value is retained when .\b. completes. The return
- status is the status of the last command exited within the
+ trap, the new value is retained when .\b. completes. The return
+ status is the status of the last command exited within the
script (0 if no commands are executed), and false if _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be is
not found or cannot be read.
a\bal\bli\bia\bas\bs [-\b-p\bp] [_\bn_\ba_\bm_\be[=_\bv_\ba_\bl_\bu_\be] ...]
A\bAl\bli\bia\bas\bs with no arguments or with the -\b-p\bp option prints the list of
- aliases in the form a\bal\bli\bia\bas\bs _\bn_\ba_\bm_\be=_\bv_\ba_\bl_\bu_\be on standard output. When
- arguments are supplied, an alias is defined for each _\bn_\ba_\bm_\be whose
- _\bv_\ba_\bl_\bu_\be is given. A trailing space in _\bv_\ba_\bl_\bu_\be causes the next word
+ aliases in the form a\bal\bli\bia\bas\bs _\bn_\ba_\bm_\be=_\bv_\ba_\bl_\bu_\be on standard output. When
+ arguments are supplied, an alias is defined for each _\bn_\ba_\bm_\be whose
+ _\bv_\ba_\bl_\bu_\be is given. A trailing space in _\bv_\ba_\bl_\bu_\be causes the next word
to be checked for alias substitution when the alias is expanded.
- For each _\bn_\ba_\bm_\be in the argument list for which no _\bv_\ba_\bl_\bu_\be is sup-
- plied, the name and value of the alias is printed. A\bAl\bli\bia\bas\bs re-
- turns true unless a _\bn_\ba_\bm_\be is given for which no alias has been
+ For each _\bn_\ba_\bm_\be in the argument list for which no _\bv_\ba_\bl_\bu_\be is sup-
+ plied, the name and value of the alias is printed. A\bAl\bli\bia\bas\bs re-
+ turns true unless a _\bn_\ba_\bm_\be is given for which no alias has been
defined.
b\bbg\bg [_\bj_\bo_\bb_\bs_\bp_\be_\bc ...]
- Resume each suspended job _\bj_\bo_\bb_\bs_\bp_\be_\bc in the background, as if it
+ Resume each suspended job _\bj_\bo_\bb_\bs_\bp_\be_\bc in the background, as if it
had been started with &\b&. If _\bj_\bo_\bb_\bs_\bp_\be_\bc is not present, the shell's
- notion of the _\bc_\bu_\br_\br_\be_\bn_\bt _\bj_\bo_\bb is used. b\bbg\bg _\bj_\bo_\bb_\bs_\bp_\be_\bc returns 0 unless
- run when job control is disabled or, when run with job control
- enabled, any specified _\bj_\bo_\bb_\bs_\bp_\be_\bc was not found or was started
+ notion of the _\bc_\bu_\br_\br_\be_\bn_\bt _\bj_\bo_\bb is used. b\bbg\bg _\bj_\bo_\bb_\bs_\bp_\be_\bc returns 0 unless
+ run when job control is disabled or, when run with job control
+ enabled, any specified _\bj_\bo_\bb_\bs_\bp_\be_\bc was not found or was started
without job control.
b\bbi\bin\bnd\bd [-\b-m\bm _\bk_\be_\by_\bm_\ba_\bp] [-\b-l\blp\bps\bsv\bvP\bPS\bSV\bVX\bX]
b\bbi\bin\bnd\bd [-\b-m\bm _\bk_\be_\by_\bm_\ba_\bp] _\bk_\be_\by_\bs_\be_\bq:_\bf_\bu_\bn_\bc_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be
b\bbi\bin\bnd\bd [-\b-m\bm _\bk_\be_\by_\bm_\ba_\bp] _\bk_\be_\by_\bs_\be_\bq:_\br_\be_\ba_\bd_\bl_\bi_\bn_\be_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd
b\bbi\bin\bnd\bd _\br_\be_\ba_\bd_\bl_\bi_\bn_\be_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd_\b-_\bl_\bi_\bn_\be
- Display current r\bre\bea\bad\bdl\bli\bin\bne\be key and function bindings, bind a key
- sequence to a r\bre\bea\bad\bdl\bli\bin\bne\be function or macro, or set a r\bre\bea\bad\bdl\bli\bin\bne\be
+ Display current r\bre\bea\bad\bdl\bli\bin\bne\be key and function bindings, bind a key
+ sequence to a r\bre\bea\bad\bdl\bli\bin\bne\be function or macro, or set a r\bre\bea\bad\bdl\bli\bin\bne\be
variable. Each non-option argument is a command as it would ap-
- pear in a r\bre\bea\bad\bdl\bli\bin\bne\be initialization file such as _\b._\bi_\bn_\bp_\bu_\bt_\br_\bc, but
- each binding or command must be passed as a separate argument;
- e.g., '"\C-x\C-r": re-read-init-file'. Options, if supplied,
+ pear in a r\bre\bea\bad\bdl\bli\bin\bne\be initialization file such as _\b._\bi_\bn_\bp_\bu_\bt_\br_\bc, but
+ each binding or command must be passed as a separate argument;
+ e.g., '"\C-x\C-r": re-read-init-file'. Options, if supplied,
have the following meanings:
-\b-m\bm _\bk_\be_\by_\bm_\ba_\bp
Use _\bk_\be_\by_\bm_\ba_\bp as the keymap to be affected by the subsequent
bindings. Acceptable _\bk_\be_\by_\bm_\ba_\bp names are _\be_\bm_\ba_\bc_\bs_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\b-
- _\bd_\ba_\br_\bd_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bm_\be_\bt_\ba_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bc_\bt_\bl_\bx_\b, _\bv_\bi_\b, _\bv_\bi_\b-_\bm_\bo_\bv_\be_\b, _\bv_\bi_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd,
- and _\bv_\bi_\b-_\bi_\bn_\bs_\be_\br_\bt. _\bv_\bi is equivalent to _\bv_\bi_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd (_\bv_\bi_\b-_\bm_\bo_\bv_\be
- is also a synonym); _\be_\bm_\ba_\bc_\bs is equivalent to _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\b-
+ _\bd_\ba_\br_\bd_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bm_\be_\bt_\ba_\b, _\be_\bm_\ba_\bc_\bs_\b-_\bc_\bt_\bl_\bx_\b, _\bv_\bi_\b, _\bv_\bi_\b-_\bm_\bo_\bv_\be_\b, _\bv_\bi_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd,
+ and _\bv_\bi_\b-_\bi_\bn_\bs_\be_\br_\bt. _\bv_\bi is equivalent to _\bv_\bi_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd (_\bv_\bi_\b-_\bm_\bo_\bv_\be
+ is also a synonym); _\be_\bm_\ba_\bc_\bs is equivalent to _\be_\bm_\ba_\bc_\bs_\b-_\bs_\bt_\ba_\bn_\b-
_\bd_\ba_\br_\bd.
-\b-l\bl List the names of all r\bre\bea\bad\bdl\bli\bin\bne\be functions.
- -\b-p\bp Display r\bre\bea\bad\bdl\bli\bin\bne\be function names and bindings in such a
+ -\b-p\bp Display r\bre\bea\bad\bdl\bli\bin\bne\be function names and bindings in such a
way that they can be re-read.
-\b-P\bP List current r\bre\bea\bad\bdl\bli\bin\bne\be function names and bindings.
- -\b-s\bs Display r\bre\bea\bad\bdl\bli\bin\bne\be key sequences bound to macros and the
- strings they output in such a way that they can be re-
+ -\b-s\bs Display r\bre\bea\bad\bdl\bli\bin\bne\be key sequences bound to macros and the
+ strings they output in such a way that they can be re-
read.
- -\b-S\bS Display r\bre\bea\bad\bdl\bli\bin\bne\be key sequences bound to macros and the
+ -\b-S\bS Display r\bre\bea\bad\bdl\bli\bin\bne\be key sequences bound to macros and the
strings they output.
- -\b-v\bv Display r\bre\bea\bad\bdl\bli\bin\bne\be variable names and values in such a way
+ -\b-v\bv Display r\bre\bea\bad\bdl\bli\bin\bne\be variable names and values in such a way
that they can be re-read.
-\b-V\bV List current r\bre\bea\bad\bdl\bli\bin\bne\be variable names and values.
-\b-f\bf _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be
Remove any current binding for _\bk_\be_\by_\bs_\be_\bq.
-\b-x\bx _\bk_\be_\by_\bs_\be_\bq:\b:_\bs_\bh_\be_\bl_\bl_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd
Cause _\bs_\bh_\be_\bl_\bl_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd to be executed whenever _\bk_\be_\by_\bs_\be_\bq is en-
- tered. When _\bs_\bh_\be_\bl_\bl_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd is executed, the shell sets
- the R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_L\bLI\bIN\bNE\bE variable to the contents of the r\bre\bea\bad\bd-\b-
+ tered. When _\bs_\bh_\be_\bl_\bl_\b-_\bc_\bo_\bm_\bm_\ba_\bn_\bd is executed, the shell sets
+ the R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_L\bLI\bIN\bNE\bE variable to the contents of the r\bre\bea\bad\bd-\b-
l\bli\bin\bne\be line buffer and the R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_P\bPO\bOI\bIN\bNT\bT and R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_M\bMA\bAR\bRK\bK
- variables to the current location of the insertion point
- and the saved insertion point (the mark), respectively.
- The shell assigns any numeric argument the user supplied
+ variables to the current location of the insertion point
+ and the saved insertion point (the mark), respectively.
+ The shell assigns any numeric argument the user supplied
to the R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_A\bAR\bRG\bGU\bUM\bME\bEN\bNT\bT variable. If there was no argu-
- ment, that variable is not set. If the executed command
- changes the value of any of R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_L\bLI\bIN\bNE\bE, R\bRE\bEA\bAD\bD-\b-
- L\bLI\bIN\bNE\bE_\b_P\bPO\bOI\bIN\bNT\bT, or R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_M\bMA\bAR\bRK\bK, those new values will be
+ ment, that variable is not set. If the executed command
+ changes the value of any of R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_L\bLI\bIN\bNE\bE, R\bRE\bEA\bAD\bD-\b-
+ L\bLI\bIN\bNE\bE_\b_P\bPO\bOI\bIN\bNT\bT, or R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE_\b_M\bMA\bAR\bRK\bK, those new values will be
reflected in the editing state.
- -\b-X\bX List all key sequences bound to shell commands and the
+ -\b-X\bX List all key sequences bound to shell commands and the
associated commands in a format that can be reused as in-
put.
- The return value is 0 unless an unrecognized option is given or
+ The return value is 0 unless an unrecognized option is given or
an error occurred.
b\bbr\bre\bea\bak\bk [_\bn]
- Exit from within a f\bfo\bor\br, w\bwh\bhi\bil\ble\be, u\bun\bnt\bti\bil\bl, or s\bse\bel\ble\bec\bct\bt loop. If _\bn is
- specified, break _\bn levels. _\bn must be >= 1. If _\bn is greater
- than the number of enclosing loops, all enclosing loops are ex-
- ited. The return value is 0 unless _\bn is not greater than or
+ Exit from within a f\bfo\bor\br, w\bwh\bhi\bil\ble\be, u\bun\bnt\bti\bil\bl, or s\bse\bel\ble\bec\bct\bt loop. If _\bn is
+ specified, break _\bn levels. _\bn must be >= 1. If _\bn is greater
+ than the number of enclosing loops, all enclosing loops are ex-
+ ited. The return value is 0 unless _\bn is not greater than or
equal to 1.
b\bbu\bui\bil\blt\bti\bin\bn _\bs_\bh_\be_\bl_\bl_\b-_\bb_\bu_\bi_\bl_\bt_\bi_\bn [_\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs]
- Execute the specified shell builtin, passing it _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs, and
+ Execute the specified shell builtin, passing it _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs, and
return its exit status. This is useful when defining a function
- whose name is the same as a shell builtin, retaining the func-
+ whose name is the same as a shell builtin, retaining the func-
tionality of the builtin within the function. The c\bcd\bd builtin is
- commonly redefined this way. The return status is false if
+ commonly redefined this way. The return status is false if
_\bs_\bh_\be_\bl_\bl_\b-_\bb_\bu_\bi_\bl_\bt_\bi_\bn is not a shell builtin command.
c\bca\bal\bll\ble\ber\br [_\be_\bx_\bp_\br]
Returns the context of any active subroutine call (a shell func-
tion or a script executed with the .\b. or s\bso\bou\bur\brc\bce\be builtins). With-
out _\be_\bx_\bp_\br, c\bca\bal\bll\ble\ber\br displays the line number and source filename of
- the current subroutine call. If a non-negative integer is sup-
+ the current subroutine call. If a non-negative integer is sup-
plied as _\be_\bx_\bp_\br, c\bca\bal\bll\ble\ber\br displays the line number, subroutine name,
- and source file corresponding to that position in the current
- execution call stack. This extra information may be used, for
- example, to print a stack trace. The current frame is frame 0.
- The return value is 0 unless the shell is not executing a sub-
- routine call or _\be_\bx_\bp_\br does not correspond to a valid position in
+ and source file corresponding to that position in the current
+ execution call stack. This extra information may be used, for
+ example, to print a stack trace. The current frame is frame 0.
+ The return value is 0 unless the shell is not executing a sub-
+ routine call or _\be_\bx_\bp_\br does not correspond to a valid position in
the call stack.
c\bcd\bd [-\b-L\bL|[-\b-P\bP [-\b-e\be]]] [-@] [_\bd_\bi_\br]
- Change the current directory to _\bd_\bi_\br. if _\bd_\bi_\br is not supplied,
- the value of the H\bHO\bOM\bME\bE shell variable is the default. The vari-
+ Change the current directory to _\bd_\bi_\br. if _\bd_\bi_\br is not supplied,
+ the value of the H\bHO\bOM\bME\bE shell variable is the default. The vari-
able C\bCD\bDP\bPA\bAT\bTH\bH defines the search path for the directory containing
- _\bd_\bi_\br: each directory name in C\bCD\bDP\bPA\bAT\bTH\bH is searched for _\bd_\bi_\br. Alter-
- native directory names in C\bCD\bDP\bPA\bAT\bTH\bH are separated by a colon (:).
- A null directory name in C\bCD\bDP\bPA\bAT\bTH\bH is the same as the current di-
- rectory, i.e., ``.\b.''. If _\bd_\bi_\br begins with a slash (/), then C\bCD\bD-\b-
- P\bPA\bAT\bTH\bH is not used. The -\b-P\bP option causes c\bcd\bd to use the physical
+ _\bd_\bi_\br: each directory name in C\bCD\bDP\bPA\bAT\bTH\bH is searched for _\bd_\bi_\br. Alter-
+ native directory names in C\bCD\bDP\bPA\bAT\bTH\bH are separated by a colon (:).
+ A null directory name in C\bCD\bDP\bPA\bAT\bTH\bH is the same as the current di-
+ rectory, i.e., ``.\b.''. If _\bd_\bi_\br begins with a slash (/), then C\bCD\bD-\b-
+ P\bPA\bAT\bTH\bH is not used. The -\b-P\bP option causes c\bcd\bd to use the physical
directory structure by resolving symbolic links while traversing
- _\bd_\bi_\br and before processing instances of _\b._\b. in _\bd_\bi_\br (see also the
+ _\bd_\bi_\br and before processing instances of _\b._\b. in _\bd_\bi_\br (see also the
-\b-P\bP option to the s\bse\bet\bt builtin command); the -\b-L\bL option forces sym-
- bolic links to be followed by resolving the link after process-
- ing instances of _\b._\b. in _\bd_\bi_\br. If _\b._\b. appears in _\bd_\bi_\br, it is pro-
- cessed by removing the immediately previous pathname component
- from _\bd_\bi_\br, back to a slash or the beginning of _\bd_\bi_\br. If the -\b-e\be
- option is supplied with -\b-P\bP, and the current working directory
- cannot be successfully determined after a successful directory
- change, c\bcd\bd will return an unsuccessful status. On systems that
+ bolic links to be followed by resolving the link after process-
+ ing instances of _\b._\b. in _\bd_\bi_\br. If _\b._\b. appears in _\bd_\bi_\br, it is pro-
+ cessed by removing the immediately previous pathname component
+ from _\bd_\bi_\br, back to a slash or the beginning of _\bd_\bi_\br. If the -\b-e\be
+ option is supplied with -\b-P\bP, and the current working directory
+ cannot be successfully determined after a successful directory
+ change, c\bcd\bd will return an unsuccessful status. On systems that
support it, the -\b-@\b@ option presents the extended attributes asso-
- ciated with a file as a directory. An argument of -\b- is con-
- verted to $\b$O\bOL\bLD\bDP\bPW\bWD\bD before the directory change is attempted. If
- a non-empty directory name from C\bCD\bDP\bPA\bAT\bTH\bH is used, or if -\b- is the
- first argument, and the directory change is successful, the ab-
- solute pathname of the new working directory is written to the
+ ciated with a file as a directory. An argument of -\b- is con-
+ verted to $\b$O\bOL\bLD\bDP\bPW\bWD\bD before the directory change is attempted. If
+ a non-empty directory name from C\bCD\bDP\bPA\bAT\bTH\bH is used, or if -\b- is the
+ first argument, and the directory change is successful, the ab-
+ solute pathname of the new working directory is written to the
standard output. If the directory change is successful, c\bcd\bd sets
- the value of the P\bPW\bWD\bD environment variable to the new directory
- name, and sets the O\bOL\bLD\bDP\bPW\bWD\bD environment variable to the value of
- the current working directory before the change. The return
- value is true if the directory was successfully changed; false
+ the value of the P\bPW\bWD\bD environment variable to the new directory
+ name, and sets the O\bOL\bLD\bDP\bPW\bWD\bD environment variable to the value of
+ the current working directory before the change. The return
+ value is true if the directory was successfully changed; false
otherwise.
c\bco\bom\bmm\bma\ban\bnd\bd [-\b-p\bpV\bVv\bv] _\bc_\bo_\bm_\bm_\ba_\bn_\bd [_\ba_\br_\bg ...]
- Run _\bc_\bo_\bm_\bm_\ba_\bn_\bd with _\ba_\br_\bg_\bs suppressing the normal shell function
+ Run _\bc_\bo_\bm_\bm_\ba_\bn_\bd with _\ba_\br_\bg_\bs suppressing the normal shell function
lookup. Only builtin commands or commands found in the P\bPA\bAT\bTH\bH are
- executed. If the -\b-p\bp option is given, the search for _\bc_\bo_\bm_\bm_\ba_\bn_\bd is
- performed using a default value for P\bPA\bAT\bTH\bH that is guaranteed to
- find all of the standard utilities. If either the -\b-V\bV or -\b-v\bv op-
- tion is supplied, a description of _\bc_\bo_\bm_\bm_\ba_\bn_\bd is printed. The -\b-v\bv
- option causes a single word indicating the command or filename
+ executed. If the -\b-p\bp option is given, the search for _\bc_\bo_\bm_\bm_\ba_\bn_\bd is
+ performed using a default value for P\bPA\bAT\bTH\bH that is guaranteed to
+ find all of the standard utilities. If either the -\b-V\bV or -\b-v\bv op-
+ tion is supplied, a description of _\bc_\bo_\bm_\bm_\ba_\bn_\bd is printed. The -\b-v\bv
+ option causes a single word indicating the command or filename
used to invoke _\bc_\bo_\bm_\bm_\ba_\bn_\bd to be displayed; the -\b-V\bV option produces a
- more verbose description. If the -\b-V\bV or -\b-v\bv option is supplied,
- the exit status is 0 if _\bc_\bo_\bm_\bm_\ba_\bn_\bd was found, and 1 if not. If
+ more verbose description. If the -\b-V\bV or -\b-v\bv option is supplied,
+ the exit status is 0 if _\bc_\bo_\bm_\bm_\ba_\bn_\bd was found, and 1 if not. If
neither option is supplied and an error occurred or _\bc_\bo_\bm_\bm_\ba_\bn_\bd can-
- not be found, the exit status is 127. Otherwise, the exit sta-
+ not be found, the exit status is 127. Otherwise, the exit sta-
tus of the c\bco\bom\bmm\bma\ban\bnd\bd builtin is the exit status of _\bc_\bo_\bm_\bm_\ba_\bn_\bd.
c\bco\bom\bmp\bpg\bge\ben\bn [-\b-V\bV _\bv_\ba_\br_\bn_\ba_\bm_\be] [_\bo_\bp_\bt_\bi_\bo_\bn] [_\bw_\bo_\br_\bd]
- Generate possible completion matches for _\bw_\bo_\br_\bd according to the
- _\bo_\bp_\bt_\bi_\bo_\bns, which may be any option accepted by the c\bco\bom\bmp\bpl\ble\bet\bte\be
+ Generate possible completion matches for _\bw_\bo_\br_\bd according to the
+ _\bo_\bp_\bt_\bi_\bo_\bns, which may be any option accepted by the c\bco\bom\bmp\bpl\ble\bet\bte\be
builtin with the exceptions of -\b-p\bp, -\b-r\br, -\b-D\bD, -\b-E\bE, and -\b-I\bI, and write
- the matches to the standard output. If the -\b-V\bV option is sup-
+ the matches to the standard output. If the -\b-V\bV option is sup-
plied, c\bco\bom\bmp\bpg\bge\ben\bn stores the generated completions into the indexed
- array variable _\bv_\ba_\br_\bn_\ba_\bm_\be instead of writing them to the standard
- output. When using the -\b-F\bF or -\b-C\bC options, the various shell
- variables set by the programmable completion facilities, while
+ array variable _\bv_\ba_\br_\bn_\ba_\bm_\be instead of writing them to the standard
+ output. When using the -\b-F\bF or -\b-C\bC options, the various shell
+ variables set by the programmable completion facilities, while
available, will not have useful values.
The matches will be generated in the same way as if the program-
mable completion code had generated them directly from a comple-
- tion specification with the same flags. If _\bw_\bo_\br_\bd is specified,
+ tion specification with the same flags. If _\bw_\bo_\br_\bd is specified,
only those completions matching _\bw_\bo_\br_\bd will be displayed.
- The return value is true unless an invalid option is supplied,
+ The return value is true unless an invalid option is supplied,
or no matches were generated.
c\bco\bom\bmp\bpl\ble\bet\bte\be [-\b-a\bab\bbc\bcd\bde\bef\bfg\bgj\bjk\bks\bsu\buv\bv] [-\b-o\bo _\bc_\bo_\bm_\bp_\b-_\bo_\bp_\bt_\bi_\bo_\bn] [-\b-D\bDE\bEI\bI] [-\b-A\bA _\ba_\bc_\bt_\bi_\bo_\bn]
[-\b-G\bG _\bg_\bl_\bo_\bb_\bp_\ba_\bt] [-\b-W\bW _\bw_\bo_\br_\bd_\bl_\bi_\bs_\bt] [-\b-F\bF _\bf_\bu_\bn_\bc_\bt_\bi_\bo_\bn] [-\b-C\bC _\bc_\bo_\bm_\bm_\ba_\bn_\bd]
[-\b-X\bX _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt] [-\b-P\bP _\bp_\br_\be_\bf_\bi_\bx] [-\b-S\bS _\bs_\bu_\bf_\bf_\bi_\bx] _\bn_\ba_\bm_\be [_\bn_\ba_\bm_\be _\b._\b._\b.]
c\bco\bom\bmp\bpl\ble\bet\bte\be -\b-p\bpr\br [-\b-D\bDE\bEI\bI] [_\bn_\ba_\bm_\be ...]
- Specify how arguments to each _\bn_\ba_\bm_\be should be completed. If the
- -\b-p\bp option is supplied, or if no options are supplied, existing
- completion specifications are printed in a way that allows them
+ Specify how arguments to each _\bn_\ba_\bm_\be should be completed. If the
+ -\b-p\bp option is supplied, or if no options are supplied, existing
+ completion specifications are printed in a way that allows them
to be reused as input. The -\b-r\br option removes a completion spec-
- ification for each _\bn_\ba_\bm_\be, or, if no _\bn_\ba_\bm_\bes are supplied, all com-
+ ification for each _\bn_\ba_\bm_\be, or, if no _\bn_\ba_\bm_\bes are supplied, all com-
pletion specifications. The -\b-D\bD option indicates that other sup-
- plied options and actions should apply to the ``default'' com-
- mand completion; that is, completion attempted on a command for
- which no completion has previously been defined. The -\b-E\bE option
- indicates that other supplied options and actions should apply
- to ``empty'' command completion; that is, completion attempted
- on a blank line. The -\b-I\bI option indicates that other supplied
- options and actions should apply to completion on the initial
- non-assignment word on the line, or after a command delimiter
- such as ;\b; or |\b|, which is usually command name completion. If
- multiple options are supplied, the -\b-D\bD option takes precedence
+ plied options and actions should apply to the ``default'' com-
+ mand completion; that is, completion attempted on a command for
+ which no completion has previously been defined. The -\b-E\bE option
+ indicates that other supplied options and actions should apply
+ to ``empty'' command completion; that is, completion attempted
+ on a blank line. The -\b-I\bI option indicates that other supplied
+ options and actions should apply to completion on the initial
+ non-assignment word on the line, or after a command delimiter
+ such as ;\b; or |\b|, which is usually command name completion. If
+ multiple options are supplied, the -\b-D\bD option takes precedence
over -\b-E\bE, and both take precedence over -\b-I\bI. If any of -\b-D\bD, -\b-E\bE, or
- -\b-I\bI are supplied, any other _\bn_\ba_\bm_\be arguments are ignored; these
+ -\b-I\bI are supplied, any other _\bn_\ba_\bm_\be arguments are ignored; these
completions only apply to the case specified by the option.
- The process of applying these completion specifications when
- word completion is attempted is described above under P\bPr\bro\bog\bgr\bra\bam\bm-\b-
+ The process of applying these completion specifications when
+ word completion is attempted is described above under P\bPr\bro\bog\bgr\bra\bam\bm-\b-
m\bma\bab\bbl\ble\be C\bCo\bom\bmp\bpl\ble\bet\bti\bio\bon\bn.
- Other options, if specified, have the following meanings. The
- arguments to the -\b-G\bG, -\b-W\bW, and -\b-X\bX options (and, if necessary, the
- -\b-P\bP and -\b-S\bS options) should be quoted to protect them from expan-
+ Other options, if specified, have the following meanings. The
+ arguments to the -\b-G\bG, -\b-W\bW, and -\b-X\bX options (and, if necessary, the
+ -\b-P\bP and -\b-S\bS options) should be quoted to protect them from expan-
sion before the c\bco\bom\bmp\bpl\ble\bet\bte\be builtin is invoked.
-\b-o\bo _\bc_\bo_\bm_\bp_\b-_\bo_\bp_\bt_\bi_\bo_\bn
- The _\bc_\bo_\bm_\bp_\b-_\bo_\bp_\bt_\bi_\bo_\bn controls several aspects of the comp-
- spec's behavior beyond the simple generation of comple-
+ The _\bc_\bo_\bm_\bp_\b-_\bo_\bp_\bt_\bi_\bo_\bn controls several aspects of the comp-
+ spec's behavior beyond the simple generation of comple-
tions. _\bc_\bo_\bm_\bp_\b-_\bo_\bp_\bt_\bi_\bo_\bn may be one of:
b\bba\bas\bsh\bhd\bde\bef\bfa\bau\bul\blt\bt
Perform the rest of the default b\bba\bas\bsh\bh completions
if the compspec generates no matches.
- d\bde\bef\bfa\bau\bul\blt\bt Use readline's default filename completion if
+ d\bde\bef\bfa\bau\bul\blt\bt Use readline's default filename completion if
the compspec generates no matches.
d\bdi\bir\brn\bna\bam\bme\bes\bs
- Perform directory name completion if the comp-
+ Perform directory name completion if the comp-
spec generates no matches.
f\bfi\bil\ble\ben\bna\bam\bme\bes\bs
- Tell readline that the compspec generates file-
- names, so it can perform any filename-specific
- processing (like adding a slash to directory
- names, quoting special characters, or suppress-
- ing trailing spaces). Intended to be used with
+ Tell readline that the compspec generates file-
+ names, so it can perform any filename-specific
+ processing (like adding a slash to directory
+ names, quoting special characters, or suppress-
+ ing trailing spaces). Intended to be used with
shell functions.
f\bfu\bul\bll\blq\bqu\buo\bot\bte\be
- Tell readline to quote all the completed words
+ Tell readline to quote all the completed words
even if they are not filenames.
- n\bno\boq\bqu\buo\bot\bte\be Tell readline not to quote the completed words
- if they are filenames (quoting filenames is the
+ n\bno\boq\bqu\buo\bot\bte\be Tell readline not to quote the completed words
+ if they are filenames (quoting filenames is the
default).
- n\bno\bos\bso\bor\brt\bt Tell readline not to sort the list of possible
+ n\bno\bos\bso\bor\brt\bt Tell readline not to sort the list of possible
completions alphabetically.
- n\bno\bos\bsp\bpa\bac\bce\be Tell readline not to append a space (the de-
- fault) to words completed at the end of the
+ n\bno\bos\bsp\bpa\bac\bce\be Tell readline not to append a space (the de-
+ fault) to words completed at the end of the
line.
p\bpl\blu\bus\bsd\bdi\bir\brs\bs
- After any matches defined by the compspec are
+ After any matches defined by the compspec are
generated, directory name completion is at-
tempted and any matches are added to the results
of the other actions.
-\b-A\bA _\ba_\bc_\bt_\bi_\bo_\bn
- The _\ba_\bc_\bt_\bi_\bo_\bn may be one of the following to generate a
+ The _\ba_\bc_\bt_\bi_\bo_\bn may be one of the following to generate a
list of possible completions:
a\bal\bli\bia\bas\bs Alias names. May also be specified as -\b-a\ba.
a\bar\brr\bra\bay\byv\bva\bar\br
Array variable names.
b\bbi\bin\bnd\bdi\bin\bng\bg R\bRe\bea\bad\bdl\bli\bin\bne\be key binding names.
- b\bbu\bui\bil\blt\bti\bin\bn Names of shell builtin commands. May also be
+ b\bbu\bui\bil\blt\bti\bin\bn Names of shell builtin commands. May also be
specified as -\b-b\bb.
c\bco\bom\bmm\bma\ban\bnd\bd Command names. May also be specified as -\b-c\bc.
d\bdi\bir\bre\bec\bct\bto\bor\bry\by
d\bdi\bis\bsa\bab\bbl\ble\bed\bd
Names of disabled shell builtins.
e\ben\bna\bab\bbl\ble\bed\bd Names of enabled shell builtins.
- e\bex\bxp\bpo\bor\brt\bt Names of exported shell variables. May also be
+ e\bex\bxp\bpo\bor\brt\bt Names of exported shell variables. May also be
specified as -\b-e\be.
f\bfi\bil\ble\be File names. May also be specified as -\b-f\bf.
f\bfu\bun\bnc\bct\bti\bio\bon\bn
h\bhe\bel\blp\bpt\bto\bop\bpi\bic\bc
Help topics as accepted by the h\bhe\bel\blp\bp builtin.
h\bho\bos\bst\btn\bna\bam\bme\be
- Hostnames, as taken from the file specified by
+ Hostnames, as taken from the file specified by
the H\bHO\bOS\bST\bTF\bFI\bIL\bLE\bE shell variable.
- j\bjo\bob\bb Job names, if job control is active. May also
+ j\bjo\bob\bb Job names, if job control is active. May also
be specified as -\b-j\bj.
- k\bke\bey\byw\bwo\bor\brd\bd Shell reserved words. May also be specified as
+ k\bke\bey\byw\bwo\bor\brd\bd Shell reserved words. May also be specified as
-\b-k\bk.
r\bru\bun\bnn\bni\bin\bng\bg Names of running jobs, if job control is active.
s\bse\ber\brv\bvi\bic\bce\be Service names. May also be specified as -\b-s\bs.
- s\bse\bet\bto\bop\bpt\bt Valid arguments for the -\b-o\bo option to the s\bse\bet\bt
+ s\bse\bet\bto\bop\bpt\bt Valid arguments for the -\b-o\bo option to the s\bse\bet\bt
builtin.
- s\bsh\bho\bop\bpt\bt Shell option names as accepted by the s\bsh\bho\bop\bpt\bt
+ s\bsh\bho\bop\bpt\bt Shell option names as accepted by the s\bsh\bho\bop\bpt\bt
builtin.
s\bsi\big\bgn\bna\bal\bl Signal names.
s\bst\bto\bop\bpp\bpe\bed\bd Names of stopped jobs, if job control is active.
Names of all shell variables. May also be spec-
ified as -\b-v\bv.
-\b-C\bC _\bc_\bo_\bm_\bm_\ba_\bn_\bd
- _\bc_\bo_\bm_\bm_\ba_\bn_\bd is executed in a subshell environment, and its
- output is used as the possible completions. Arguments
+ _\bc_\bo_\bm_\bm_\ba_\bn_\bd is executed in a subshell environment, and its
+ output is used as the possible completions. Arguments
are passed as with the -\b-F\bF option.
-\b-F\bF _\bf_\bu_\bn_\bc_\bt_\bi_\bo_\bn
- The shell function _\bf_\bu_\bn_\bc_\bt_\bi_\bo_\bn is executed in the current
- shell environment. When the function is executed, the
+ The shell function _\bf_\bu_\bn_\bc_\bt_\bi_\bo_\bn is executed in the current
+ shell environment. When the function is executed, the
first argument ($\b$1\b1) is the name of the command whose ar-
guments are being completed, the second argument ($\b$2\b2) is
the word being completed, and the third argument ($\b$3\b3) is
- the word preceding the word being completed on the cur-
- rent command line. When it finishes, the possible com-
- pletions are retrieved from the value of the C\bCO\bOM\bMP\bPR\bRE\bEP\bPL\bLY\bY
+ the word preceding the word being completed on the cur-
+ rent command line. When it finishes, the possible com-
+ pletions are retrieved from the value of the C\bCO\bOM\bMP\bPR\bRE\bEP\bPL\bLY\bY
array variable.
-\b-G\bG _\bg_\bl_\bo_\bb_\bp_\ba_\bt
- The pathname expansion pattern _\bg_\bl_\bo_\bb_\bp_\ba_\bt is expanded to
+ The pathname expansion pattern _\bg_\bl_\bo_\bb_\bp_\ba_\bt is expanded to
generate the possible completions.
-\b-P\bP _\bp_\br_\be_\bf_\bi_\bx
- _\bp_\br_\be_\bf_\bi_\bx is added at the beginning of each possible com-
+ _\bp_\br_\be_\bf_\bi_\bx is added at the beginning of each possible com-
pletion after all other options have been applied.
-\b-S\bS _\bs_\bu_\bf_\bf_\bi_\bx
_\bs_\bu_\bf_\bf_\bi_\bx is appended to each possible completion after all
other options have been applied.
-\b-W\bW _\bw_\bo_\br_\bd_\bl_\bi_\bs_\bt
- The _\bw_\bo_\br_\bd_\bl_\bi_\bs_\bt is split using the characters in the I\bIF\bFS\bS
- special variable as delimiters, and each resultant word
- is expanded. Shell quoting is honored within _\bw_\bo_\br_\bd_\bl_\bi_\bs_\bt,
+ The _\bw_\bo_\br_\bd_\bl_\bi_\bs_\bt is split using the characters in the I\bIF\bFS\bS
+ special variable as delimiters, and each resultant word
+ is expanded. Shell quoting is honored within _\bw_\bo_\br_\bd_\bl_\bi_\bs_\bt,
in order to provide a mechanism for the words to contain
- shell metacharacters or characters in the value of I\bIF\bFS\bS.
- The possible completions are the members of the resul-
+ shell metacharacters or characters in the value of I\bIF\bFS\bS.
+ The possible completions are the members of the resul-
tant list which match the word being completed.
-\b-X\bX _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt
- _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt is a pattern as used for pathname expansion.
+ _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt is a pattern as used for pathname expansion.
It is applied to the list of possible completions gener-
- ated by the preceding options and arguments, and each
- completion matching _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt is removed from the list.
- A leading !\b! in _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt negates the pattern; in this
+ ated by the preceding options and arguments, and each
+ completion matching _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt is removed from the list.
+ A leading !\b! in _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt negates the pattern; in this
case, any completion not matching _\bf_\bi_\bl_\bt_\be_\br_\bp_\ba_\bt is removed.
- The return value is true unless an invalid option is supplied,
+ The return value is true unless an invalid option is supplied,
an option other than -\b-p\bp, -\b-r\br, -\b-D\bD, -\b-E\bE, or -\b-I\bI is supplied without a
- _\bn_\ba_\bm_\be argument, an attempt is made to remove a completion speci-
+ _\bn_\ba_\bm_\be argument, an attempt is made to remove a completion speci-
fication for a _\bn_\ba_\bm_\be for which no specification exists, or an er-
ror occurs adding a completion specification.
c\bco\bom\bmp\bpo\bop\bpt\bt [-\b-o\bo _\bo_\bp_\bt_\bi_\bo_\bn] [-\b-D\bDE\bEI\bI] [+\b+o\bo _\bo_\bp_\bt_\bi_\bo_\bn] [_\bn_\ba_\bm_\be]
- Modify completion options for each _\bn_\ba_\bm_\be according to the _\bo_\bp_\b-
+ Modify completion options for each _\bn_\ba_\bm_\be according to the _\bo_\bp_\b-
_\bt_\bi_\bo_\bns, or for the currently-executing completion if no _\bn_\ba_\bm_\bes are
- supplied. If no _\bo_\bp_\bt_\bi_\bo_\bns are given, display the completion op-
- tions for each _\bn_\ba_\bm_\be or the current completion. The possible
- values of _\bo_\bp_\bt_\bi_\bo_\bn are those valid for the c\bco\bom\bmp\bpl\ble\bet\bte\be builtin de-
- scribed above. The -\b-D\bD option indicates that other supplied op-
- tions should apply to the ``default'' command completion; that
- is, completion attempted on a command for which no completion
+ supplied. If no _\bo_\bp_\bt_\bi_\bo_\bns are given, display the completion op-
+ tions for each _\bn_\ba_\bm_\be or the current completion. The possible
+ values of _\bo_\bp_\bt_\bi_\bo_\bn are those valid for the c\bco\bom\bmp\bpl\ble\bet\bte\be builtin de-
+ scribed above. The -\b-D\bD option indicates that other supplied op-
+ tions should apply to the ``default'' command completion; that
+ is, completion attempted on a command for which no completion
has previously been defined. The -\b-E\bE option indicates that other
- supplied options should apply to ``empty'' command completion;
- that is, completion attempted on a blank line. The -\b-I\bI option
+ supplied options should apply to ``empty'' command completion;
+ that is, completion attempted on a blank line. The -\b-I\bI option
indicates that other supplied options should apply to completion
- on the initial non-assignment word on the line, or after a com-
- mand delimiter such as ;\b; or |\b|, which is usually command name
+ on the initial non-assignment word on the line, or after a com-
+ mand delimiter such as ;\b; or |\b|, which is usually command name
completion.
- The return value is true unless an invalid option is supplied,
+ The return value is true unless an invalid option is supplied,
an attempt is made to modify the options for a _\bn_\ba_\bm_\be for which no
completion specification exists, or an output error occurs.
c\bco\bon\bnt\bti\bin\bnu\bue\be [_\bn]
Resume the next iteration of the enclosing f\bfo\bor\br, w\bwh\bhi\bil\ble\be, u\bun\bnt\bti\bil\bl, or
- s\bse\bel\ble\bec\bct\bt loop. If _\bn is specified, resume at the _\bnth enclosing
- loop. _\bn must be >= 1. If _\bn is greater than the number of en-
- closing loops, the last enclosing loop (the ``top-level'' loop)
- is resumed. The return value is 0 unless _\bn is not greater than
+ s\bse\bel\ble\bec\bct\bt loop. If _\bn is specified, resume at the _\bnth enclosing
+ loop. _\bn must be >= 1. If _\bn is greater than the number of en-
+ closing loops, the last enclosing loop (the ``top-level'' loop)
+ is resumed. The return value is 0 unless _\bn is not greater than
or equal to 1.
d\bde\bec\bcl\bla\bar\bre\be [-\b-a\baA\bAf\bfF\bFg\bgi\biI\bIl\bln\bnr\brt\btu\bux\bx] [-\b-p\bp] [_\bn_\ba_\bm_\be[=_\bv_\ba_\bl_\bu_\be] ...]
t\bty\byp\bpe\bes\bse\bet\bt [-\b-a\baA\bAf\bfF\bFg\bgi\biI\bIl\bln\bnr\brt\btu\bux\bx] [-\b-p\bp] [_\bn_\ba_\bm_\be[=_\bv_\ba_\bl_\bu_\be] ...]
- Declare variables and/or give them attributes. If no _\bn_\ba_\bm_\bes are
- given then display the values of variables. The -\b-p\bp option will
+ Declare variables and/or give them attributes. If no _\bn_\ba_\bm_\bes are
+ given then display the values of variables. The -\b-p\bp option will
display the attributes and values of each _\bn_\ba_\bm_\be. When -\b-p\bp is used
- with _\bn_\ba_\bm_\be arguments, additional options, other than -\b-f\bf and -\b-F\bF,
- are ignored. When -\b-p\bp is supplied without _\bn_\ba_\bm_\be arguments, it
- will display the attributes and values of all variables having
+ with _\bn_\ba_\bm_\be arguments, additional options, other than -\b-f\bf and -\b-F\bF,
+ are ignored. When -\b-p\bp is supplied without _\bn_\ba_\bm_\be arguments, it
+ will display the attributes and values of all variables having
the attributes specified by the additional options. If no other
- options are supplied with -\b-p\bp, d\bde\bec\bcl\bla\bar\bre\be will display the at-
- tributes and values of all shell variables. The -\b-f\bf option will
+ options are supplied with -\b-p\bp, d\bde\bec\bcl\bla\bar\bre\be will display the at-
+ tributes and values of all shell variables. The -\b-f\bf option will
restrict the display to shell functions. The -\b-F\bF option inhibits
- the display of function definitions; only the function name and
+ the display of function definitions; only the function name and
attributes are printed. If the e\bex\bxt\btd\bde\beb\bbu\bug\bg shell option is enabled
- using s\bsh\bho\bop\bpt\bt, the source file name and line number where each
- _\bn_\ba_\bm_\be is defined are displayed as well. The -\b-F\bF option implies
+ using s\bsh\bho\bop\bpt\bt, the source file name and line number where each
+ _\bn_\ba_\bm_\be is defined are displayed as well. The -\b-F\bF option implies
-\b-f\bf. The -\b-g\bg option forces variables to be created or modified at
the global scope, even when d\bde\bec\bcl\bla\bar\bre\be is executed in a shell func-
- tion. It is ignored in all other cases. The -\b-I\bI option causes
- local variables to inherit the attributes (except the _\bn_\ba_\bm_\be_\br_\be_\bf
+ tion. It is ignored in all other cases. The -\b-I\bI option causes
+ local variables to inherit the attributes (except the _\bn_\ba_\bm_\be_\br_\be_\bf
attribute) and value of any existing variable with the same _\bn_\ba_\bm_\be
- at a surrounding scope. If there is no existing variable, the
+ at a surrounding scope. If there is no existing variable, the
local variable is initially unset. The following options can be
- used to restrict output to variables with the specified attri-
+ used to restrict output to variables with the specified attri-
bute or to give variables attributes:
- -\b-a\ba Each _\bn_\ba_\bm_\be is an indexed array variable (see A\bAr\brr\bra\bay\bys\bs
+ -\b-a\ba Each _\bn_\ba_\bm_\be is an indexed array variable (see A\bAr\brr\bra\bay\bys\bs
above).
- -\b-A\bA Each _\bn_\ba_\bm_\be is an associative array variable (see A\bAr\brr\bra\bay\bys\bs
+ -\b-A\bA Each _\bn_\ba_\bm_\be is an associative array variable (see A\bAr\brr\bra\bay\bys\bs
above).
-\b-f\bf Use function names only.
-\b-i\bi The variable is treated as an integer; arithmetic evalua-
- tion (see A\bAR\bRI\bIT\bTH\bHM\bME\bET\bTI\bIC\bC E\bEV\bVA\bAL\bLU\bUA\bAT\bTI\bIO\bON\bN above) is performed when
+ tion (see A\bAR\bRI\bIT\bTH\bHM\bME\bET\bTI\bIC\bC E\bEV\bVA\bAL\bLU\bUA\bAT\bTI\bIO\bON\bN above) is performed when
the variable is assigned a value.
- -\b-l\bl When the variable is assigned a value, all upper-case
- characters are converted to lower-case. The upper-case
+ -\b-l\bl When the variable is assigned a value, all upper-case
+ characters are converted to lower-case. The upper-case
attribute is disabled.
- -\b-n\bn Give each _\bn_\ba_\bm_\be the _\bn_\ba_\bm_\be_\br_\be_\bf attribute, making it a name
- reference to another variable. That other variable is
- defined by the value of _\bn_\ba_\bm_\be. All references, assign-
- ments, and attribute modifications to _\bn_\ba_\bm_\be, except those
- using or changing the -\b-n\bn attribute itself, are performed
- on the variable referenced by _\bn_\ba_\bm_\be's value. The nameref
+ -\b-n\bn Give each _\bn_\ba_\bm_\be the _\bn_\ba_\bm_\be_\br_\be_\bf attribute, making it a name
+ reference to another variable. That other variable is
+ defined by the value of _\bn_\ba_\bm_\be. All references, assign-
+ ments, and attribute modifications to _\bn_\ba_\bm_\be, except those
+ using or changing the -\b-n\bn attribute itself, are performed
+ on the variable referenced by _\bn_\ba_\bm_\be's value. The nameref
attribute cannot be applied to array variables.
-\b-r\br Make _\bn_\ba_\bm_\bes readonly. These names cannot then be assigned
values by subsequent assignment statements or unset.
-\b-t\bt Give each _\bn_\ba_\bm_\be the _\bt_\br_\ba_\bc_\be attribute. Traced functions in-
- herit the D\bDE\bEB\bBU\bUG\bG and R\bRE\bET\bTU\bUR\bRN\bN traps from the calling shell.
+ herit the D\bDE\bEB\bBU\bUG\bG and R\bRE\bET\bTU\bUR\bRN\bN traps from the calling shell.
The trace attribute has no special meaning for variables.
- -\b-u\bu When the variable is assigned a value, all lower-case
- characters are converted to upper-case. The lower-case
+ -\b-u\bu When the variable is assigned a value, all lower-case
+ characters are converted to upper-case. The lower-case
attribute is disabled.
- -\b-x\bx Mark _\bn_\ba_\bm_\bes for export to subsequent commands via the en-
+ -\b-x\bx Mark _\bn_\ba_\bm_\bes for export to subsequent commands via the en-
vironment.
- Using `+' instead of `-' turns off the attribute instead, with
- the exceptions that +\b+a\ba and +\b+A\bA may not be used to destroy array
- variables and +\b+r\br will not remove the readonly attribute. When
+ Using `+' instead of `-' turns off the attribute instead, with
+ the exceptions that +\b+a\ba and +\b+A\bA may not be used to destroy array
+ variables and +\b+r\br will not remove the readonly attribute. When
used in a function, d\bde\bec\bcl\bla\bar\bre\be and t\bty\byp\bpe\bes\bse\bet\bt make each _\bn_\ba_\bm_\be local, as
- with the l\blo\boc\bca\bal\bl command, unless the -\b-g\bg option is supplied. If a
- variable name is followed by =_\bv_\ba_\bl_\bu_\be, the value of the variable
- is set to _\bv_\ba_\bl_\bu_\be. When using -\b-a\ba or -\b-A\bA and the compound assign-
- ment syntax to create array variables, additional attributes do
- not take effect until subsequent assignments. The return value
+ with the l\blo\boc\bca\bal\bl command, unless the -\b-g\bg option is supplied. If a
+ variable name is followed by =_\bv_\ba_\bl_\bu_\be, the value of the variable
+ is set to _\bv_\ba_\bl_\bu_\be. When using -\b-a\ba or -\b-A\bA and the compound assign-
+ ment syntax to create array variables, additional attributes do
+ not take effect until subsequent assignments. The return value
is 0 unless an invalid option is encountered, an attempt is made
to define a function using ``-f foo=bar'', an attempt is made to
assign a value to a readonly variable, an attempt is made to as-
sign a value to an array variable without using the compound as-
- signment syntax (see A\bAr\brr\bra\bay\bys\bs above), one of the _\bn_\ba_\bm_\be_\bs is not a
- valid shell variable name, an attempt is made to turn off read-
- only status for a readonly variable, an attempt is made to turn
+ signment syntax (see A\bAr\brr\bra\bay\bys\bs above), one of the _\bn_\ba_\bm_\be_\bs is not a
+ valid shell variable name, an attempt is made to turn off read-
+ only status for a readonly variable, an attempt is made to turn
off array status for an array variable, or an attempt is made to
display a non-existent function with -\b-f\bf.
d\bdi\bir\brs\bs [\b[-\b-c\bcl\blp\bpv\bv]\b] [\b[+\b+_\bn]\b] [\b[-\b-_\bn]\b]
- Without options, displays the list of currently remembered di-
- rectories. The default display is on a single line with direc-
- tory names separated by spaces. Directories are added to the
- list with the p\bpu\bus\bsh\bhd\bd command; the p\bpo\bop\bpd\bd command removes entries
+ Without options, displays the list of currently remembered di-
+ rectories. The default display is on a single line with direc-
+ tory names separated by spaces. Directories are added to the
+ list with the p\bpu\bus\bsh\bhd\bd command; the p\bpo\bop\bpd\bd command removes entries
from the list. The current directory is always the first direc-
tory in the stack.
- -\b-c\bc Clears the directory stack by deleting all of the en-
+ -\b-c\bc Clears the directory stack by deleting all of the en-
tries.
- -\b-l\bl Produces a listing using full pathnames; the default
+ -\b-l\bl Produces a listing using full pathnames; the default
listing format uses a tilde to denote the home directory.
-\b-p\bp Print the directory stack with one entry per line.
- -\b-v\bv Print the directory stack with one entry per line, pre-
+ -\b-v\bv Print the directory stack with one entry per line, pre-
fixing each entry with its index in the stack.
+\b+_\bn Displays the _\bnth entry counting from the left of the list
shown by d\bdi\bir\brs\bs when invoked without options, starting with
zero.
- -\b-_\bn Displays the _\bnth entry counting from the right of the
+ -\b-_\bn Displays the _\bnth entry counting from the right of the
list shown by d\bdi\bir\brs\bs when invoked without options, starting
with zero.
- The return value is 0 unless an invalid option is supplied or _\bn
+ The return value is 0 unless an invalid option is supplied or _\bn
indexes beyond the end of the directory stack.
d\bdi\bis\bso\bow\bwn\bn [-\b-a\bar\br] [-\b-h\bh] [_\bj_\bo_\bb_\bs_\bp_\be_\bc ... | _\bp_\bi_\bd ... ]
- Without options, remove each _\bj_\bo_\bb_\bs_\bp_\be_\bc from the table of active
- jobs. If _\bj_\bo_\bb_\bs_\bp_\be_\bc is not present, and neither the -\b-a\ba nor the -\b-r\br
- option is supplied, the _\bc_\bu_\br_\br_\be_\bn_\bt _\bj_\bo_\bb is used. If the -\b-h\bh option
- is given, each _\bj_\bo_\bb_\bs_\bp_\be_\bc is not removed from the table, but is
- marked so that S\bSI\bIG\bGH\bHU\bUP\bP is not sent to the job if the shell re-
+ Without options, remove each _\bj_\bo_\bb_\bs_\bp_\be_\bc from the table of active
+ jobs. If _\bj_\bo_\bb_\bs_\bp_\be_\bc is not present, and neither the -\b-a\ba nor the -\b-r\br
+ option is supplied, the _\bc_\bu_\br_\br_\be_\bn_\bt _\bj_\bo_\bb is used. If the -\b-h\bh option
+ is given, each _\bj_\bo_\bb_\bs_\bp_\be_\bc is not removed from the table, but is
+ marked so that S\bSI\bIG\bGH\bHU\bUP\bP is not sent to the job if the shell re-
ceives a S\bSI\bIG\bGH\bHU\bUP\bP. If no _\bj_\bo_\bb_\bs_\bp_\be_\bc is supplied, the -\b-a\ba option means
- to remove or mark all jobs; the -\b-r\br option without a _\bj_\bo_\bb_\bs_\bp_\be_\bc ar-
+ to remove or mark all jobs; the -\b-r\br option without a _\bj_\bo_\bb_\bs_\bp_\be_\bc ar-
gument restricts operation to running jobs. The return value is
0 unless a _\bj_\bo_\bb_\bs_\bp_\be_\bc does not specify a valid job.
e\bec\bch\bho\bo [-\b-n\bne\beE\bE] [_\ba_\br_\bg ...]
- Output the _\ba_\br_\bgs, separated by spaces, followed by a newline.
- The return status is 0 unless a write error occurs. If -\b-n\bn is
+ Output the _\ba_\br_\bgs, separated by spaces, followed by a newline.
+ The return status is 0 unless a write error occurs. If -\b-n\bn is
specified, the trailing newline is suppressed. If the -\b-e\be option
- is given, interpretation of the following backslash-escaped
- characters is enabled. The -\b-E\bE option disables the interpreta-
- tion of these escape characters, even on systems where they are
- interpreted by default. The x\bxp\bpg\bg_\b_e\bec\bch\bho\bo shell option may be used
- to dynamically determine whether or not e\bec\bch\bho\bo expands these es-
- cape characters by default. e\bec\bch\bho\bo does not interpret -\b--\b- to mean
- the end of options. e\bec\bch\bho\bo interprets the following escape se-
+ is given, interpretation of the following backslash-escaped
+ characters is enabled. The -\b-E\bE option disables the interpreta-
+ tion of these escape characters, even on systems where they are
+ interpreted by default. The x\bxp\bpg\bg_\b_e\bec\bch\bho\bo shell option may be used
+ to dynamically determine whether or not e\bec\bch\bho\bo expands these es-
+ cape characters by default. e\bec\bch\bho\bo does not interpret -\b--\b- to mean
+ the end of options. e\bec\bch\bho\bo interprets the following escape se-
quences:
\\b\a\ba alert (bell)
\\b\b\bb backspace
\\b\t\bt horizontal tab
\\b\v\bv vertical tab
\\b\\\b\ backslash
- \\b\0\b0_\bn_\bn_\bn the eight-bit character whose value is the octal value
+ \\b\0\b0_\bn_\bn_\bn the eight-bit character whose value is the octal value
_\bn_\bn_\bn (zero to three octal digits)
- \\b\x\bx_\bH_\bH the eight-bit character whose value is the hexadecimal
+ \\b\x\bx_\bH_\bH the eight-bit character whose value is the hexadecimal
value _\bH_\bH (one or two hex digits)
- \\b\u\bu_\bH_\bH_\bH_\bH the Unicode (ISO/IEC 10646) character whose value is the
+ \\b\u\bu_\bH_\bH_\bH_\bH the Unicode (ISO/IEC 10646) character whose value is the
hexadecimal value _\bH_\bH_\bH_\bH (one to four hex digits)
\\b\U\bU_\bH_\bH_\bH_\bH_\bH_\bH_\bH_\bH
- the Unicode (ISO/IEC 10646) character whose value is the
+ the Unicode (ISO/IEC 10646) character whose value is the
hexadecimal value _\bH_\bH_\bH_\bH_\bH_\bH_\bH_\bH (one to eight hex digits)
e\ben\bna\bab\bbl\ble\be [-\b-a\ba] [-\b-d\bdn\bnp\bps\bs] [-\b-f\bf _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be] [_\bn_\ba_\bm_\be ...]
- Enable and disable builtin shell commands. Disabling a builtin
+ Enable and disable builtin shell commands. Disabling a builtin
allows a disk command which has the same name as a shell builtin
- to be executed without specifying a full pathname, even though
- the shell normally searches for builtins before disk commands.
- If -\b-n\bn is used, each _\bn_\ba_\bm_\be is disabled; otherwise, _\bn_\ba_\bm_\be_\bs are en-
- abled. For example, to use the t\bte\bes\bst\bt binary found via the P\bPA\bAT\bTH\bH
- instead of the shell builtin version, run ``enable -n test''.
- The -\b-f\bf option means to load the new builtin command _\bn_\ba_\bm_\be from
+ to be executed without specifying a full pathname, even though
+ the shell normally searches for builtins before disk commands.
+ If -\b-n\bn is used, each _\bn_\ba_\bm_\be is disabled; otherwise, _\bn_\ba_\bm_\be_\bs are en-
+ abled. For example, to use the t\bte\bes\bst\bt binary found via the P\bPA\bAT\bTH\bH
+ instead of the shell builtin version, run ``enable -n test''.
+ The -\b-f\bf option means to load the new builtin command _\bn_\ba_\bm_\be from
shared object _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be, on systems that support dynamic loading.
Bash will use the value of the B\bBA\bAS\bSH\bH_\b_L\bLO\bOA\bAD\bDA\bAB\bBL\bLE\bES\bS_\b_P\bPA\bAT\bTH\bH variable as a
colon-separated list of directories in which to search for _\bf_\bi_\bl_\be_\b-
- _\bn_\ba_\bm_\be. The default is system-dependent. The -\b-d\bd option will
- delete a builtin previously loaded with -\b-f\bf. If no _\bn_\ba_\bm_\be argu-
- ments are given, or if the -\b-p\bp option is supplied, a list of
- shell builtins is printed. With no other option arguments, the
+ _\bn_\ba_\bm_\be. The default is system-dependent. The -\b-d\bd option will
+ delete a builtin previously loaded with -\b-f\bf. If no _\bn_\ba_\bm_\be argu-
+ ments are given, or if the -\b-p\bp option is supplied, a list of
+ shell builtins is printed. With no other option arguments, the
list consists of all enabled shell builtins. If -\b-n\bn is supplied,
only disabled builtins are printed. If -\b-a\ba is supplied, the list
- printed includes all builtins, with an indication of whether or
- not each is enabled. If -\b-s\bs is supplied, the output is re-
- stricted to the POSIX _\bs_\bp_\be_\bc_\bi_\ba_\bl builtins. If no options are sup-
- plied and a _\bn_\ba_\bm_\be is not a shell builtin, e\ben\bna\bab\bbl\ble\be will attempt to
- load _\bn_\ba_\bm_\be from a shared object named _\bn_\ba_\bm_\be, as if the command
- were ``enable -f _\bn_\ba_\bm_\be _\bn_\ba_\bm_\be . The return value is 0 unless a
- _\bn_\ba_\bm_\be is not a shell builtin or there is an error loading a new
+ printed includes all builtins, with an indication of whether or
+ not each is enabled. If -\b-s\bs is supplied, the output is re-
+ stricted to the POSIX _\bs_\bp_\be_\bc_\bi_\ba_\bl builtins. If no options are sup-
+ plied and a _\bn_\ba_\bm_\be is not a shell builtin, e\ben\bna\bab\bbl\ble\be will attempt to
+ load _\bn_\ba_\bm_\be from a shared object named _\bn_\ba_\bm_\be, as if the command
+ were ``enable -f _\bn_\ba_\bm_\be _\bn_\ba_\bm_\be . The return value is 0 unless a
+ _\bn_\ba_\bm_\be is not a shell builtin or there is an error loading a new
builtin from a shared object.
e\bev\bva\bal\bl [_\ba_\br_\bg ...]
- The _\ba_\br_\bgs are read and concatenated together into a single com-
- mand. This command is then read and executed by the shell, and
- its exit status is returned as the value of e\bev\bva\bal\bl. If there are
+ The _\ba_\br_\bgs are read and concatenated together into a single com-
+ mand. This command is then read and executed by the shell, and
+ its exit status is returned as the value of e\bev\bva\bal\bl. If there are
no _\ba_\br_\bg_\bs, or only null arguments, e\bev\bva\bal\bl returns 0.
e\bex\bxe\bec\bc [-\b-c\bcl\bl] [-\b-a\ba _\bn_\ba_\bm_\be] [_\bc_\bo_\bm_\bm_\ba_\bn_\bd [_\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs]]
- If _\bc_\bo_\bm_\bm_\ba_\bn_\bd is specified, it replaces the shell. No new process
- is created. The _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs become the arguments to _\bc_\bo_\bm_\bm_\ba_\bn_\bd. If
+ If _\bc_\bo_\bm_\bm_\ba_\bn_\bd is specified, it replaces the shell. No new process
+ is created. The _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs become the arguments to _\bc_\bo_\bm_\bm_\ba_\bn_\bd. If
the -\b-l\bl option is supplied, the shell places a dash at the begin-
ning of the zeroth argument passed to _\bc_\bo_\bm_\bm_\ba_\bn_\bd. This is what _\bl_\bo_\b-
- _\bg_\bi_\bn(1) does. The -\b-c\bc option causes _\bc_\bo_\bm_\bm_\ba_\bn_\bd to be executed with
- an empty environment. If -\b-a\ba is supplied, the shell passes _\bn_\ba_\bm_\be
+ _\bg_\bi_\bn(1) does. The -\b-c\bc option causes _\bc_\bo_\bm_\bm_\ba_\bn_\bd to be executed with
+ an empty environment. If -\b-a\ba is supplied, the shell passes _\bn_\ba_\bm_\be
as the zeroth argument to the executed command. If _\bc_\bo_\bm_\bm_\ba_\bn_\bd can-
- not be executed for some reason, a non-interactive shell exits,
- unless the e\bex\bxe\bec\bcf\bfa\bai\bil\bl shell option is enabled. In that case, it
- returns failure. An interactive shell returns failure if the
- file cannot be executed. A subshell exits unconditionally if
- e\bex\bxe\bec\bc fails. If _\bc_\bo_\bm_\bm_\ba_\bn_\bd is not specified, any redirections take
- effect in the current shell, and the return status is 0. If
+ not be executed for some reason, a non-interactive shell exits,
+ unless the e\bex\bxe\bec\bcf\bfa\bai\bil\bl shell option is enabled. In that case, it
+ returns failure. An interactive shell returns failure if the
+ file cannot be executed. A subshell exits unconditionally if
+ e\bex\bxe\bec\bc fails. If _\bc_\bo_\bm_\bm_\ba_\bn_\bd is not specified, any redirections take
+ effect in the current shell, and the return status is 0. If
there is a redirection error, the return status is 1.
e\bex\bxi\bit\bt [_\bn]
- Cause the shell to exit with a status of _\bn. If _\bn is omitted,
+ Cause the shell to exit with a status of _\bn. If _\bn is omitted,
the exit status is that of the last command executed. A trap on
E\bEX\bXI\bIT\bT is executed before the shell terminates.
e\bex\bxp\bpo\bor\brt\bt [-\b-f\bfn\bn] [_\bn_\ba_\bm_\be[=_\bw_\bo_\br_\bd]] ...
e\bex\bxp\bpo\bor\brt\bt -\b-p\bp
- The supplied _\bn_\ba_\bm_\be_\bs are marked for automatic export to the envi-
- ronment of subsequently executed commands. If the -\b-f\bf option is
- given, the _\bn_\ba_\bm_\be_\bs refer to functions. If no _\bn_\ba_\bm_\be_\bs are given, or
- if the -\b-p\bp option is supplied, a list of names of all exported
- variables is printed. The -\b-n\bn option causes the export property
+ The supplied _\bn_\ba_\bm_\be_\bs are marked for automatic export to the envi-
+ ronment of subsequently executed commands. If the -\b-f\bf option is
+ given, the _\bn_\ba_\bm_\be_\bs refer to functions. If no _\bn_\ba_\bm_\be_\bs are given, or
+ if the -\b-p\bp option is supplied, a list of names of all exported
+ variables is printed. The -\b-n\bn option causes the export property
to be removed from each _\bn_\ba_\bm_\be. If a variable name is followed by
=_\bw_\bo_\br_\bd, the value of the variable is set to _\bw_\bo_\br_\bd. e\bex\bxp\bpo\bor\brt\bt returns
an exit status of 0 unless an invalid option is encountered, one
- of the _\bn_\ba_\bm_\be_\bs is not a valid shell variable name, or -\b-f\bf is sup-
+ of the _\bn_\ba_\bm_\be_\bs is not a valid shell variable name, or -\b-f\bf is sup-
plied with a _\bn_\ba_\bm_\be that is not a function.
f\bfa\bal\bls\bse\be Does nothing, returns a non-zero status.
f\bfc\bc [-\b-e\be _\be_\bn_\ba_\bm_\be] [-\b-l\bln\bnr\br] [_\bf_\bi_\br_\bs_\bt] [_\bl_\ba_\bs_\bt]
f\bfc\bc -\b-s\bs [_\bp_\ba_\bt=_\br_\be_\bp] [_\bc_\bm_\bd]
- The first form selects a range of commands from _\bf_\bi_\br_\bs_\bt to _\bl_\ba_\bs_\bt
- from the history list and displays or edits and re-executes
- them. _\bF_\bi_\br_\bs_\bt and _\bl_\ba_\bs_\bt may be specified as a string (to locate
- the last command beginning with that string) or as a number (an
- index into the history list, where a negative number is used as
- an offset from the current command number). When listing, a
- _\bf_\bi_\br_\bs_\bt or _\bl_\ba_\bs_\bt of 0 is equivalent to -1 and -0 is equivalent to
- the current command (usually the f\bfc\bc command); otherwise 0 is
- equivalent to -1 and -0 is invalid. If _\bl_\ba_\bs_\bt is not specified,
- it is set to the current command for listing (so that ``fc -l
- -10'' prints the last 10 commands) and to _\bf_\bi_\br_\bs_\bt otherwise. If
- _\bf_\bi_\br_\bs_\bt is not specified, it is set to the previous command for
+ The first form selects a range of commands from _\bf_\bi_\br_\bs_\bt to _\bl_\ba_\bs_\bt
+ from the history list and displays or edits and re-executes
+ them. _\bF_\bi_\br_\bs_\bt and _\bl_\ba_\bs_\bt may be specified as a string (to locate
+ the last command beginning with that string) or as a number (an
+ index into the history list, where a negative number is used as
+ an offset from the current command number). When listing, a
+ _\bf_\bi_\br_\bs_\bt or _\bl_\ba_\bs_\bt of 0 is equivalent to -1 and -0 is equivalent to
+ the current command (usually the f\bfc\bc command); otherwise 0 is
+ equivalent to -1 and -0 is invalid. If _\bl_\ba_\bs_\bt is not specified,
+ it is set to the current command for listing (so that ``fc -l
+ -10'' prints the last 10 commands) and to _\bf_\bi_\br_\bs_\bt otherwise. If
+ _\bf_\bi_\br_\bs_\bt is not specified, it is set to the previous command for
editing and -16 for listing.
- The -\b-n\bn option suppresses the command numbers when listing. The
- -\b-r\br option reverses the order of the commands. If the -\b-l\bl option
- is given, the commands are listed on standard output. Other-
- wise, the editor given by _\be_\bn_\ba_\bm_\be is invoked on a file containing
- those commands. If _\be_\bn_\ba_\bm_\be is not given, the value of the F\bFC\bCE\bED\bDI\bIT\bT
- variable is used, and the value of E\bED\bDI\bIT\bTO\bOR\bR if F\bFC\bCE\bED\bDI\bIT\bT is not set.
- If neither variable is set, _\bv_\bi is used. When editing is com-
+ The -\b-n\bn option suppresses the command numbers when listing. The
+ -\b-r\br option reverses the order of the commands. If the -\b-l\bl option
+ is given, the commands are listed on standard output. Other-
+ wise, the editor given by _\be_\bn_\ba_\bm_\be is invoked on a file containing
+ those commands. If _\be_\bn_\ba_\bm_\be is not given, the value of the F\bFC\bCE\bED\bDI\bIT\bT
+ variable is used, and the value of E\bED\bDI\bIT\bTO\bOR\bR if F\bFC\bCE\bED\bDI\bIT\bT is not set.
+ If neither variable is set, _\bv_\bi is used. When editing is com-
plete, the edited commands are echoed and executed.
- In the second form, _\bc_\bo_\bm_\bm_\ba_\bn_\bd is re-executed after each instance
- of _\bp_\ba_\bt is replaced by _\br_\be_\bp. _\bC_\bo_\bm_\bm_\ba_\bn_\bd is interpreted the same as
- _\bf_\bi_\br_\bs_\bt above. A useful alias to use with this is ``r="fc -s"'',
- so that typing ``r cc'' runs the last command beginning with
+ In the second form, _\bc_\bo_\bm_\bm_\ba_\bn_\bd is re-executed after each instance
+ of _\bp_\ba_\bt is replaced by _\br_\be_\bp. _\bC_\bo_\bm_\bm_\ba_\bn_\bd is interpreted the same as
+ _\bf_\bi_\br_\bs_\bt above. A useful alias to use with this is ``r="fc -s"'',
+ so that typing ``r cc'' runs the last command beginning with
``cc'' and typing ``r'' re-executes the last command.
- If the first form is used, the return value is 0 unless an in-
- valid option is encountered or _\bf_\bi_\br_\bs_\bt or _\bl_\ba_\bs_\bt specify history
- lines out of range. If the -\b-e\be option is supplied, the return
+ If the first form is used, the return value is 0 unless an in-
+ valid option is encountered or _\bf_\bi_\br_\bs_\bt or _\bl_\ba_\bs_\bt specify history
+ lines out of range. If the -\b-e\be option is supplied, the return
value is the value of the last command executed or failure if an
error occurs with the temporary file of commands. If the second
- form is used, the return status is that of the command re-exe-
- cuted, unless _\bc_\bm_\bd does not specify a valid history line, in
+ form is used, the return status is that of the command re-exe-
+ cuted, unless _\bc_\bm_\bd does not specify a valid history line, in
which case f\bfc\bc returns failure.
f\bfg\bg [_\bj_\bo_\bb_\bs_\bp_\be_\bc]
- Resume _\bj_\bo_\bb_\bs_\bp_\be_\bc in the foreground, and make it the current job.
+ Resume _\bj_\bo_\bb_\bs_\bp_\be_\bc in the foreground, and make it the current job.
If _\bj_\bo_\bb_\bs_\bp_\be_\bc is not present, the shell's notion of the _\bc_\bu_\br_\br_\be_\bn_\bt _\bj_\bo_\bb
- is used. The return value is that of the command placed into
- the foreground, or failure if run when job control is disabled
+ is used. The return value is that of the command placed into
+ the foreground, or failure if run when job control is disabled
or, when run with job control enabled, if _\bj_\bo_\bb_\bs_\bp_\be_\bc does not spec-
- ify a valid job or _\bj_\bo_\bb_\bs_\bp_\be_\bc specifies a job that was started
+ ify a valid job or _\bj_\bo_\bb_\bs_\bp_\be_\bc specifies a job that was started
without job control.
g\bge\bet\bto\bop\bpt\bts\bs _\bo_\bp_\bt_\bs_\bt_\br_\bi_\bn_\bg _\bn_\ba_\bm_\be [_\ba_\br_\bg _\b._\b._\b.]
- g\bge\bet\bto\bop\bpt\bts\bs is used by shell procedures to parse positional parame-
- ters. _\bo_\bp_\bt_\bs_\bt_\br_\bi_\bn_\bg contains the option characters to be recog-
- nized; if a character is followed by a colon, the option is ex-
+ g\bge\bet\bto\bop\bpt\bts\bs is used by shell procedures to parse positional parame-
+ ters. _\bo_\bp_\bt_\bs_\bt_\br_\bi_\bn_\bg contains the option characters to be recog-
+ nized; if a character is followed by a colon, the option is ex-
pected to have an argument, which should be separated from it by
- white space. The colon and question mark characters may not be
- used as option characters. Each time it is invoked, g\bge\bet\bto\bop\bpt\bts\bs
- places the next option in the shell variable _\bn_\ba_\bm_\be, initializing
+ white space. The colon and question mark characters may not be
+ used as option characters. Each time it is invoked, g\bge\bet\bto\bop\bpt\bts\bs
+ places the next option in the shell variable _\bn_\ba_\bm_\be, initializing
_\bn_\ba_\bm_\be if it does not exist, and the index of the next argument to
be processed into the variable O\bOP\bPT\bTI\bIN\bND\bD. O\bOP\bPT\bTI\bIN\bND\bD is initialized to
1 each time the shell or a shell script is invoked. When an op-
tion requires an argument, g\bge\bet\bto\bop\bpt\bts\bs places that argument into the
variable O\bOP\bPT\bTA\bAR\bRG\bG. The shell does not reset O\bOP\bPT\bTI\bIN\bND\bD automatically;
- it must be manually reset between multiple calls to g\bge\bet\bto\bop\bpt\bts\bs
- within the same shell invocation if a new set of parameters is
+ it must be manually reset between multiple calls to g\bge\bet\bto\bop\bpt\bts\bs
+ within the same shell invocation if a new set of parameters is
to be used.
When the end of options is encountered, g\bge\bet\bto\bop\bpt\bts\bs exits with a re-
turn value greater than zero. O\bOP\bPT\bTI\bIN\bND\bD is set to the index of the
first non-option argument, and _\bn_\ba_\bm_\be is set to ?.
- g\bge\bet\bto\bop\bpt\bts\bs normally parses the positional parameters, but if more
- arguments are supplied as _\ba_\br_\bg values, g\bge\bet\bto\bop\bpt\bts\bs parses those in-
+ g\bge\bet\bto\bop\bpt\bts\bs normally parses the positional parameters, but if more
+ arguments are supplied as _\ba_\br_\bg values, g\bge\bet\bto\bop\bpt\bts\bs parses those in-
stead.
- g\bge\bet\bto\bop\bpt\bts\bs can report errors in two ways. If the first character
- of _\bo_\bp_\bt_\bs_\bt_\br_\bi_\bn_\bg is a colon, _\bs_\bi_\bl_\be_\bn_\bt error reporting is used. In
- normal operation, diagnostic messages are printed when invalid
- options or missing option arguments are encountered. If the
- variable O\bOP\bPT\bTE\bER\bRR\bR is set to 0, no error messages will be dis-
+ g\bge\bet\bto\bop\bpt\bts\bs can report errors in two ways. If the first character
+ of _\bo_\bp_\bt_\bs_\bt_\br_\bi_\bn_\bg is a colon, _\bs_\bi_\bl_\be_\bn_\bt error reporting is used. In
+ normal operation, diagnostic messages are printed when invalid
+ options or missing option arguments are encountered. If the
+ variable O\bOP\bPT\bTE\bER\bRR\bR is set to 0, no error messages will be dis-
played, even if the first character of _\bo_\bp_\bt_\bs_\bt_\br_\bi_\bn_\bg is not a colon.
If an invalid option is seen, g\bge\bet\bto\bop\bpt\bts\bs places ? into _\bn_\ba_\bm_\be and, if
- not silent, prints an error message and unsets O\bOP\bPT\bTA\bAR\bRG\bG. If
- g\bge\bet\bto\bop\bpt\bts\bs is silent, the option character found is placed in O\bOP\bP-\b-
+ not silent, prints an error message and unsets O\bOP\bPT\bTA\bAR\bRG\bG. If
+ g\bge\bet\bto\bop\bpt\bts\bs is silent, the option character found is placed in O\bOP\bP-\b-
T\bTA\bAR\bRG\bG and no diagnostic message is printed.
- If a required argument is not found, and g\bge\bet\bto\bop\bpt\bts\bs is not silent,
- a question mark (?\b?) is placed in _\bn_\ba_\bm_\be, O\bOP\bPT\bTA\bAR\bRG\bG is unset, and a
- diagnostic message is printed. If g\bge\bet\bto\bop\bpt\bts\bs is silent, then a
- colon (:\b:) is placed in _\bn_\ba_\bm_\be and O\bOP\bPT\bTA\bAR\bRG\bG is set to the option
+ If a required argument is not found, and g\bge\bet\bto\bop\bpt\bts\bs is not silent,
+ a question mark (?\b?) is placed in _\bn_\ba_\bm_\be, O\bOP\bPT\bTA\bAR\bRG\bG is unset, and a
+ diagnostic message is printed. If g\bge\bet\bto\bop\bpt\bts\bs is silent, then a
+ colon (:\b:) is placed in _\bn_\ba_\bm_\be and O\bOP\bPT\bTA\bAR\bRG\bG is set to the option
character found.
- g\bge\bet\bto\bop\bpt\bts\bs returns true if an option, specified or unspecified, is
+ g\bge\bet\bto\bop\bpt\bts\bs returns true if an option, specified or unspecified, is
found. It returns false if the end of options is encountered or
an error occurs.
h\bha\bas\bsh\bh [-\b-l\blr\br] [-\b-p\bp _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be] [-\b-d\bdt\bt] [_\bn_\ba_\bm_\be]
Each time h\bha\bas\bsh\bh is invoked, the full pathname of the command _\bn_\ba_\bm_\be
- is determined by searching the directories in $\b$P\bPA\bAT\bTH\bH and remem-
+ is determined by searching the directories in $\b$P\bPA\bAT\bTH\bH and remem-
bered. Any previously-remembered pathname is discarded. If the
-\b-p\bp option is supplied, no path search is performed, and _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be
- is used as the full filename of the command. The -\b-r\br option
- causes the shell to forget all remembered locations. Assigning
- to the P\bPA\bAT\bTH\bH variable also clears all hashed filenames. The -\b-d\bd
- option causes the shell to forget the remembered location of
- each _\bn_\ba_\bm_\be. If the -\b-t\bt option is supplied, the full pathname to
- which each _\bn_\ba_\bm_\be corresponds is printed. If multiple _\bn_\ba_\bm_\be argu-
- ments are supplied with -\b-t\bt, the _\bn_\ba_\bm_\be is printed before the
- hashed full pathname. The -\b-l\bl option causes output to be dis-
+ is used as the full filename of the command. The -\b-r\br option
+ causes the shell to forget all remembered locations. Assigning
+ to the P\bPA\bAT\bTH\bH variable also clears all hashed filenames. The -\b-d\bd
+ option causes the shell to forget the remembered location of
+ each _\bn_\ba_\bm_\be. If the -\b-t\bt option is supplied, the full pathname to
+ which each _\bn_\ba_\bm_\be corresponds is printed. If multiple _\bn_\ba_\bm_\be argu-
+ ments are supplied with -\b-t\bt, the _\bn_\ba_\bm_\be is printed before the
+ hashed full pathname. The -\b-l\bl option causes output to be dis-
played in a format that may be reused as input. If no arguments
- are given, or if only -\b-l\bl is supplied, information about remem-
- bered commands is printed. The return status is true unless a
+ are given, or if only -\b-l\bl is supplied, information about remem-
+ bered commands is printed. The return status is true unless a
_\bn_\ba_\bm_\be is not found or an invalid option is supplied.
h\bhe\bel\blp\bp [-\b-d\bdm\bms\bs] [_\bp_\ba_\bt_\bt_\be_\br_\bn]
- Display helpful information about builtin commands. If _\bp_\ba_\bt_\bt_\be_\br_\bn
- is specified, h\bhe\bel\blp\bp gives detailed help on all commands matching
- _\bp_\ba_\bt_\bt_\be_\br_\bn; otherwise help for all the builtins and shell control
+ Display helpful information about builtin commands. If _\bp_\ba_\bt_\bt_\be_\br_\bn
+ is specified, h\bhe\bel\blp\bp gives detailed help on all commands matching
+ _\bp_\ba_\bt_\bt_\be_\br_\bn; otherwise help for all the builtins and shell control
structures is printed.
-\b-d\bd Display a short description of each _\bp_\ba_\bt_\bt_\be_\br_\bn
-\b-m\bm Display the description of each _\bp_\ba_\bt_\bt_\be_\br_\bn in a manpage-like
h\bhi\bis\bst\bto\bor\bry\by -\b-s\bs _\ba_\br_\bg [_\ba_\br_\bg _\b._\b._\b.]
With no options, display the command history list with line num-
bers. Lines listed with a *\b* have been modified. An argument of
- _\bn lists only the last _\bn lines. If the shell variable H\bHI\bIS\bST\bTT\bTI\bIM\bME\bE-\b-
- F\bFO\bOR\bRM\bMA\bAT\bT is set and not null, it is used as a format string for
- _\bs_\bt_\br_\bf_\bt_\bi_\bm_\be(3) to display the time stamp associated with each dis-
- played history entry. No intervening blank is printed between
- the formatted time stamp and the history line. If _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be is
- supplied, it is used as the name of the history file; if not,
- the value of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE is used. Options, if supplied, have the
+ _\bn lists only the last _\bn lines. If the shell variable H\bHI\bIS\bST\bTT\bTI\bIM\bME\bE-\b-
+ F\bFO\bOR\bRM\bMA\bAT\bT is set and not null, it is used as a format string for
+ _\bs_\bt_\br_\bf_\bt_\bi_\bm_\be(3) to display the time stamp associated with each dis-
+ played history entry. No intervening blank is printed between
+ the formatted time stamp and the history line. If _\bf_\bi_\bl_\be_\bn_\ba_\bm_\be is
+ supplied, it is used as the name of the history file; if not,
+ the value of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE is used. Options, if supplied, have the
following meanings:
-\b-c\bc Clear the history list by deleting all the entries.
-\b-d\bd _\bo_\bf_\bf_\bs_\be_\bt
- Delete the history entry at position _\bo_\bf_\bf_\bs_\be_\bt. If _\bo_\bf_\bf_\bs_\be_\bt
+ Delete the history entry at position _\bo_\bf_\bf_\bs_\be_\bt. If _\bo_\bf_\bf_\bs_\be_\bt
is negative, it is interpreted as relative to one greater
than the last history position, so negative indices count
- back from the end of the history, and an index of -1
+ back from the end of the history, and an index of -1
refers to the current h\bhi\bis\bst\bto\bor\bry\by -\b-d\bd command.
-\b-d\bd _\bs_\bt_\ba_\br_\bt-_\be_\bn_\bd
- Delete the range of history entries between positions
- _\bs_\bt_\ba_\br_\bt and _\be_\bn_\bd, inclusive. Positive and negative values
+ Delete the range of history entries between positions
+ _\bs_\bt_\ba_\br_\bt and _\be_\bn_\bd, inclusive. Positive and negative values
for _\bs_\bt_\ba_\br_\bt and _\be_\bn_\bd are interpreted as described above.
- -\b-a\ba Append the ``new'' history lines to the history file.
- These are history lines entered since the beginning of
+ -\b-a\ba Append the ``new'' history lines to the history file.
+ These are history lines entered since the beginning of
the current b\bba\bas\bsh\bh session, but not already appended to the
history file.
- -\b-n\bn Read the history lines not already read from the history
- file into the current history list. These are lines ap-
- pended to the history file since the beginning of the
+ -\b-n\bn Read the history lines not already read from the history
+ file into the current history list. These are lines ap-
+ pended to the history file since the beginning of the
current b\bba\bas\bsh\bh session.
- -\b-r\br Read the contents of the history file and append them to
+ -\b-r\br Read the contents of the history file and append them to
the current history list.
-\b-w\bw Write the current history list to the history file, over-
writing the history file's contents.
- -\b-p\bp Perform history substitution on the following _\ba_\br_\bg_\bs and
- display the result on the standard output. Does not
- store the results in the history list. Each _\ba_\br_\bg must be
+ -\b-p\bp Perform history substitution on the following _\ba_\br_\bg_\bs and
+ display the result on the standard output. Does not
+ store the results in the history list. Each _\ba_\br_\bg must be
quoted to disable normal history expansion.
- -\b-s\bs Store the _\ba_\br_\bg_\bs in the history list as a single entry.
- The last command in the history list is removed before
+ -\b-s\bs Store the _\ba_\br_\bg_\bs in the history list as a single entry.
+ The last command in the history list is removed before
the _\ba_\br_\bg_\bs are added.
- If the H\bHI\bIS\bST\bTT\bTI\bIM\bME\bEF\bFO\bOR\bRM\bMA\bAT\bT variable is set, the time stamp informa-
- tion associated with each history entry is written to the his-
- tory file, marked with the history comment character. When the
- history file is read, lines beginning with the history comment
- character followed immediately by a digit are interpreted as
+ If the H\bHI\bIS\bST\bTT\bTI\bIM\bME\bEF\bFO\bOR\bRM\bMA\bAT\bT variable is set, the time stamp informa-
+ tion associated with each history entry is written to the his-
+ tory file, marked with the history comment character. When the
+ history file is read, lines beginning with the history comment
+ character followed immediately by a digit are interpreted as
timestamps for the following history entry. The return value is
0 unless an invalid option is encountered, an error occurs while
- reading or writing the history file, an invalid _\bo_\bf_\bf_\bs_\be_\bt or range
- is supplied as an argument to -\b-d\bd, or the history expansion sup-
+ reading or writing the history file, an invalid _\bo_\bf_\bf_\bs_\be_\bt or range
+ is supplied as an argument to -\b-d\bd, or the history expansion sup-
plied as an argument to -\b-p\bp fails.
j\bjo\bob\bbs\bs [-\b-l\bln\bnp\bpr\brs\bs] [ _\bj_\bo_\bb_\bs_\bp_\be_\bc ... ]
The first form lists the active jobs. The options have the fol-
lowing meanings:
-\b-l\bl List process IDs in addition to the normal information.
- -\b-n\bn Display information only about jobs that have changed
+ -\b-n\bn Display information only about jobs that have changed
status since the user was last notified of their status.
- -\b-p\bp List only the process ID of the job's process group
+ -\b-p\bp List only the process ID of the job's process group
leader.
-\b-r\br Display only running jobs.
-\b-s\bs Display only stopped jobs.
- If _\bj_\bo_\bb_\bs_\bp_\be_\bc is given, output is restricted to information about
- that job. The return status is 0 unless an invalid option is
+ If _\bj_\bo_\bb_\bs_\bp_\be_\bc is given, output is restricted to information about
+ that job. The return status is 0 unless an invalid option is
encountered or an invalid _\bj_\bo_\bb_\bs_\bp_\be_\bc is supplied.
If the -\b-x\bx option is supplied, j\bjo\bob\bbs\bs replaces any _\bj_\bo_\bb_\bs_\bp_\be_\bc found in
k\bki\bil\bll\bl [-\b-s\bs _\bs_\bi_\bg_\bs_\bp_\be_\bc | -\b-n\bn _\bs_\bi_\bg_\bn_\bu_\bm | -\b-_\bs_\bi_\bg_\bs_\bp_\be_\bc] [_\bp_\bi_\bd | _\bj_\bo_\bb_\bs_\bp_\be_\bc] ...
k\bki\bil\bll\bl -\b-l\bl|-\b-L\bL [_\bs_\bi_\bg_\bs_\bp_\be_\bc | _\be_\bx_\bi_\bt_\b__\bs_\bt_\ba_\bt_\bu_\bs]
- Send the signal named by _\bs_\bi_\bg_\bs_\bp_\be_\bc or _\bs_\bi_\bg_\bn_\bu_\bm to the processes
- named by _\bp_\bi_\bd or _\bj_\bo_\bb_\bs_\bp_\be_\bc. _\bs_\bi_\bg_\bs_\bp_\be_\bc is either a case-insensitive
- signal name such as S\bSI\bIG\bGK\bKI\bIL\bLL\bL (with or without the S\bSI\bIG\bG prefix) or
- a signal number; _\bs_\bi_\bg_\bn_\bu_\bm is a signal number. If _\bs_\bi_\bg_\bs_\bp_\be_\bc is not
- present, then S\bSI\bIG\bGT\bTE\bER\bRM\bM is assumed. An argument of -\b-l\bl lists the
- signal names. If any arguments are supplied when -\b-l\bl is given,
- the names of the signals corresponding to the arguments are
+ Send the signal named by _\bs_\bi_\bg_\bs_\bp_\be_\bc or _\bs_\bi_\bg_\bn_\bu_\bm to the processes
+ named by _\bp_\bi_\bd or _\bj_\bo_\bb_\bs_\bp_\be_\bc. _\bs_\bi_\bg_\bs_\bp_\be_\bc is either a case-insensitive
+ signal name such as S\bSI\bIG\bGK\bKI\bIL\bLL\bL (with or without the S\bSI\bIG\bG prefix) or
+ a signal number; _\bs_\bi_\bg_\bn_\bu_\bm is a signal number. If _\bs_\bi_\bg_\bs_\bp_\be_\bc is not
+ present, then S\bSI\bIG\bGT\bTE\bER\bRM\bM is assumed. An argument of -\b-l\bl lists the
+ signal names. If any arguments are supplied when -\b-l\bl is given,
+ the names of the signals corresponding to the arguments are
listed, and the return status is 0. The _\be_\bx_\bi_\bt_\b__\bs_\bt_\ba_\bt_\bu_\bs argument to
- -\b-l\bl is a number specifying either a signal number or the exit
- status of a process terminated by a signal. The -\b-L\bL option is
- equivalent to -\b-l\bl. k\bki\bil\bll\bl returns true if at least one signal was
+ -\b-l\bl is a number specifying either a signal number or the exit
+ status of a process terminated by a signal. The -\b-L\bL option is
+ equivalent to -\b-l\bl. k\bki\bil\bll\bl returns true if at least one signal was
successfully sent, or false if an error occurs or an invalid op-
tion is encountered.
l\ble\bet\bt _\ba_\br_\bg [_\ba_\br_\bg ...]
Each _\ba_\br_\bg is an arithmetic expression to be evaluated (see A\bAR\bRI\bIT\bTH\bH-\b-
- M\bME\bET\bTI\bIC\bC E\bEV\bVA\bAL\bLU\bUA\bAT\bTI\bIO\bON\bN above). If the last _\ba_\br_\bg evaluates to 0, l\ble\bet\bt
+ M\bME\bET\bTI\bIC\bC E\bEV\bVA\bAL\bLU\bUA\bAT\bTI\bIO\bON\bN above). If the last _\ba_\br_\bg evaluates to 0, l\ble\bet\bt
returns 1; 0 is returned otherwise.
l\blo\boc\bca\bal\bl [_\bo_\bp_\bt_\bi_\bo_\bn] [_\bn_\ba_\bm_\be[=_\bv_\ba_\bl_\bu_\be] ... | - ]
- For each argument, a local variable named _\bn_\ba_\bm_\be is created, and
- assigned _\bv_\ba_\bl_\bu_\be. The _\bo_\bp_\bt_\bi_\bo_\bn can be any of the options accepted
+ For each argument, a local variable named _\bn_\ba_\bm_\be is created, and
+ assigned _\bv_\ba_\bl_\bu_\be. The _\bo_\bp_\bt_\bi_\bo_\bn can be any of the options accepted
by d\bde\bec\bcl\bla\bar\bre\be. When l\blo\boc\bca\bal\bl is used within a function, it causes the
- variable _\bn_\ba_\bm_\be to have a visible scope restricted to that func-
- tion and its children. If _\bn_\ba_\bm_\be is -, the set of shell options
- is made local to the function in which l\blo\boc\bca\bal\bl is invoked: shell
- options changed using the s\bse\bet\bt builtin inside the function after
+ variable _\bn_\ba_\bm_\be to have a visible scope restricted to that func-
+ tion and its children. If _\bn_\ba_\bm_\be is -, the set of shell options
+ is made local to the function in which l\blo\boc\bca\bal\bl is invoked: shell
+ options changed using the s\bse\bet\bt builtin inside the function after
the call to l\blo\boc\bca\bal\bl are restored to their original values when the
function returns. The restore is effected as if a series of s\bse\bet\bt
- commands were executed to restore the values that were in place
- before the function. With no operands, l\blo\boc\bca\bal\bl writes a list of
- local variables to the standard output. It is an error to use
+ commands were executed to restore the values that were in place
+ before the function. With no operands, l\blo\boc\bca\bal\bl writes a list of
+ local variables to the standard output. It is an error to use
l\blo\boc\bca\bal\bl when not within a function. The return status is 0 unless
- l\blo\boc\bca\bal\bl is used outside a function, an invalid _\bn_\ba_\bm_\be is supplied,
+ l\blo\boc\bca\bal\bl is used outside a function, an invalid _\bn_\ba_\bm_\be is supplied,
or _\bn_\ba_\bm_\be is a readonly variable.
l\blo\bog\bgo\bou\but\bt Exit a login shell.
- m\bma\bap\bpf\bfi\bil\ble\be [-\b-d\bd _\bd_\be_\bl_\bi_\bm] [-\b-n\bn _\bc_\bo_\bu_\bn_\bt] [-\b-O\bO _\bo_\br_\bi_\bg_\bi_\bn] [-\b-s\bs _\bc_\bo_\bu_\bn_\bt] [-\b-t\bt] [-\b-u\bu _\bf_\bd] [-\b-C\bC
+ m\bma\bap\bpf\bfi\bil\ble\be [-\b-d\bd _\bd_\be_\bl_\bi_\bm] [-\b-n\bn _\bc_\bo_\bu_\bn_\bt] [-\b-O\bO _\bo_\br_\bi_\bg_\bi_\bn] [-\b-s\bs _\bc_\bo_\bu_\bn_\bt] [-\b-t\bt] [-\b-u\bu _\bf_\bd] [-\b-C\bC
_\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk] [-\b-c\bc _\bq_\bu_\ba_\bn_\bt_\bu_\bm] [_\ba_\br_\br_\ba_\by]
r\bre\bea\bad\bda\bar\brr\bra\bay\by [-\b-d\bd _\bd_\be_\bl_\bi_\bm] [-\b-n\bn _\bc_\bo_\bu_\bn_\bt] [-\b-O\bO _\bo_\br_\bi_\bg_\bi_\bn] [-\b-s\bs _\bc_\bo_\bu_\bn_\bt] [-\b-t\bt] [-\b-u\bu _\bf_\bd] [-\b-C\bC
_\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk] [-\b-c\bc _\bq_\bu_\ba_\bn_\bt_\bu_\bm] [_\ba_\br_\br_\ba_\by]
- Read lines from the standard input into the indexed array vari-
- able _\ba_\br_\br_\ba_\by, or from file descriptor _\bf_\bd if the -\b-u\bu option is sup-
- plied. The variable M\bMA\bAP\bPF\bFI\bIL\bLE\bE is the default _\ba_\br_\br_\ba_\by. Options, if
+ Read lines from the standard input into the indexed array vari-
+ able _\ba_\br_\br_\ba_\by, or from file descriptor _\bf_\bd if the -\b-u\bu option is sup-
+ plied. The variable M\bMA\bAP\bPF\bFI\bIL\bLE\bE is the default _\ba_\br_\br_\ba_\by. Options, if
supplied, have the following meanings:
- -\b-d\bd The first character of _\bd_\be_\bl_\bi_\bm is used to terminate each
- input line, rather than newline. If _\bd_\be_\bl_\bi_\bm is the empty
+ -\b-d\bd The first character of _\bd_\be_\bl_\bi_\bm is used to terminate each
+ input line, rather than newline. If _\bd_\be_\bl_\bi_\bm is the empty
string, m\bma\bap\bpf\bfi\bil\ble\be will terminate a line when it reads a NUL
character.
- -\b-n\bn Copy at most _\bc_\bo_\bu_\bn_\bt lines. If _\bc_\bo_\bu_\bn_\bt is 0, all lines are
+ -\b-n\bn Copy at most _\bc_\bo_\bu_\bn_\bt lines. If _\bc_\bo_\bu_\bn_\bt is 0, all lines are
copied.
- -\b-O\bO Begin assigning to _\ba_\br_\br_\ba_\by at index _\bo_\br_\bi_\bg_\bi_\bn. The default
+ -\b-O\bO Begin assigning to _\ba_\br_\br_\ba_\by at index _\bo_\br_\bi_\bg_\bi_\bn. The default
index is 0.
-\b-s\bs Discard the first _\bc_\bo_\bu_\bn_\bt lines read.
- -\b-t\bt Remove a trailing _\bd_\be_\bl_\bi_\bm (default newline) from each line
+ -\b-t\bt Remove a trailing _\bd_\be_\bl_\bi_\bm (default newline) from each line
read.
- -\b-u\bu Read lines from file descriptor _\bf_\bd instead of the stan-
+ -\b-u\bu Read lines from file descriptor _\bf_\bd instead of the stan-
dard input.
- -\b-C\bC Evaluate _\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk each time _\bq_\bu_\ba_\bn_\bt_\bu_\bm lines are read. The
+ -\b-C\bC Evaluate _\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk each time _\bq_\bu_\ba_\bn_\bt_\bu_\bm lines are read. The
-\b-c\bc option specifies _\bq_\bu_\ba_\bn_\bt_\bu_\bm.
- -\b-c\bc Specify the number of lines read between each call to
+ -\b-c\bc Specify the number of lines read between each call to
_\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk.
- If -\b-C\bC is specified without -\b-c\bc, the default quantum is 5000.
+ If -\b-C\bC is specified without -\b-c\bc, the default quantum is 5000.
When _\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk is evaluated, it is supplied the index of the next
array element to be assigned and the line to be assigned to that
- element as additional arguments. _\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk is evaluated after
+ element as additional arguments. _\bc_\ba_\bl_\bl_\bb_\ba_\bc_\bk is evaluated after
the line is read but before the array element is assigned.
- If not supplied with an explicit origin, m\bma\bap\bpf\bfi\bil\ble\be will clear _\ba_\br_\b-
+ If not supplied with an explicit origin, m\bma\bap\bpf\bfi\bil\ble\be will clear _\ba_\br_\b-
_\br_\ba_\by before assigning to it.
- m\bma\bap\bpf\bfi\bil\ble\be returns successfully unless an invalid option or option
- argument is supplied, _\ba_\br_\br_\ba_\by is invalid or unassignable, or if
+ m\bma\bap\bpf\bfi\bil\ble\be returns successfully unless an invalid option or option
+ argument is supplied, _\ba_\br_\br_\ba_\by is invalid or unassignable, or if
_\ba_\br_\br_\ba_\by is not an indexed array.
p\bpo\bop\bpd\bd [-n\bn] [+_\bn] [-_\bn]
Removes entries from the directory stack. The elements are num-
- bered from 0 starting at the first directory listed by d\bdi\bir\brs\bs.
- With no arguments, p\bpo\bop\bpd\bd removes the top directory from the
+ bered from 0 starting at the first directory listed by d\bdi\bir\brs\bs.
+ With no arguments, p\bpo\bop\bpd\bd removes the top directory from the
stack, and changes to the new top directory. Arguments, if sup-
plied, have the following meanings:
- -\b-n\bn Suppresses the normal change of directory when removing
+ -\b-n\bn Suppresses the normal change of directory when removing
directories from the stack, so that only the stack is ma-
nipulated.
- +\b+_\bn Removes the _\bnth entry counting from the left of the list
- shown by d\bdi\bir\brs\bs, starting with zero, from the stack. For
- example: ``popd +0'' removes the first directory, ``popd
+ +\b+_\bn Removes the _\bnth entry counting from the left of the list
+ shown by d\bdi\bir\brs\bs, starting with zero, from the stack. For
+ example: ``popd +0'' removes the first directory, ``popd
+1'' the second.
-\b-_\bn Removes the _\bnth entry counting from the right of the list
- shown by d\bdi\bir\brs\bs, starting with zero. For example: ``popd
- -0'' removes the last directory, ``popd -1'' the next to
+ shown by d\bdi\bir\brs\bs, starting with zero. For example: ``popd
+ -0'' removes the last directory, ``popd -1'' the next to
last.
- If the top element of the directory stack is modified, and the
- _\b-_\bn option was not supplied, p\bpo\bop\bpd\bd uses the c\bcd\bd builtin to change
+ If the top element of the directory stack is modified, and the
+ _\b-_\bn option was not supplied, p\bpo\bop\bpd\bd uses the c\bcd\bd builtin to change
to the directory at the top of the stack. If the c\bcd\bd fails, p\bpo\bop\bpd\bd
returns a non-zero value.
- Otherwise, p\bpo\bop\bpd\bd returns false if an invalid option is encoun-
+ Otherwise, p\bpo\bop\bpd\bd returns false if an invalid option is encoun-
tered, the directory stack is empty, or a non-existent directory
stack entry is specified.
- If the p\bpo\bop\bpd\bd command is successful, bash runs d\bdi\bir\brs\bs to show the
- final contents of the directory stack, and the return status is
+ If the p\bpo\bop\bpd\bd command is successful, bash runs d\bdi\bir\brs\bs to show the
+ final contents of the directory stack, and the return status is
0.
p\bpr\bri\bin\bnt\btf\bf [-\b-v\bv _\bv_\ba_\br] _\bf_\bo_\br_\bm_\ba_\bt [_\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs]
- Write the formatted _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs to the standard output under the
- control of the _\bf_\bo_\br_\bm_\ba_\bt. The -\b-v\bv option causes the output to be
- assigned to the variable _\bv_\ba_\br rather than being printed to the
+ Write the formatted _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs to the standard output under the
+ control of the _\bf_\bo_\br_\bm_\ba_\bt. The -\b-v\bv option causes the output to be
+ assigned to the variable _\bv_\ba_\br rather than being printed to the
standard output.
- The _\bf_\bo_\br_\bm_\ba_\bt is a character string which contains three types of
- objects: plain characters, which are simply copied to standard
- output, character escape sequences, which are converted and
- copied to the standard output, and format specifications, each
- of which causes printing of the next successive _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt. In
+ The _\bf_\bo_\br_\bm_\ba_\bt is a character string which contains three types of
+ objects: plain characters, which are simply copied to standard
+ output, character escape sequences, which are converted and
+ copied to the standard output, and format specifications, each
+ of which causes printing of the next successive _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt. In
addition to the standard _\bp_\br_\bi_\bn_\bt_\bf(3) format characters c\bcs\bsn\bnd\bdi\bio\bou\bux\bxX\bXe\be-\b-
E\bEf\bfF\bFg\bgG\bGa\baA\bA, p\bpr\bri\bin\bnt\btf\bf interprets the following additional format spec-
ifiers:
%\b%b\bb causes p\bpr\bri\bin\bnt\btf\bf to expand backslash escape sequences in the
corresponding _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt in the same way as e\bec\bch\bho\bo -\b-e\be.
- %\b%q\bq causes p\bpr\bri\bin\bnt\btf\bf to output the corresponding _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt in a
- format that can be reused as shell input. %\b%q\bq and %\b%Q\bQ use
- the $\b$'\b''\b' quoting style if any characters in the argument
- string require it, and backslash quoting otherwise. If
- the format string uses the _\bp_\br_\bi_\bn_\bt_\bf alternate form, these
+ %\b%q\bq causes p\bpr\bri\bin\bnt\btf\bf to output the corresponding _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt in a
+ format that can be reused as shell input. %\b%q\bq and %\b%Q\bQ use
+ the $\b$'\b''\b' quoting style if any characters in the argument
+ string require it, and backslash quoting otherwise. If
+ the format string uses the _\bp_\br_\bi_\bn_\bt_\bf alternate form, these
two formats quote the argument string using single
quotes.
- %\b%Q\bQ like %\b%q\bq, but applies any supplied precision to the _\ba_\br_\bg_\bu_\b-
+ %\b%Q\bQ like %\b%q\bq, but applies any supplied precision to the _\ba_\br_\bg_\bu_\b-
_\bm_\be_\bn_\bt before quoting it.
%\b%(\b(_\bd_\ba_\bt_\be_\bf_\bm_\bt)\b)T\bT
- causes p\bpr\bri\bin\bnt\btf\bf to output the date-time string resulting
- from using _\bd_\ba_\bt_\be_\bf_\bm_\bt as a format string for _\bs_\bt_\br_\bf_\bt_\bi_\bm_\be(3).
+ causes p\bpr\bri\bin\bnt\btf\bf to output the date-time string resulting
+ from using _\bd_\ba_\bt_\be_\bf_\bm_\bt as a format string for _\bs_\bt_\br_\bf_\bt_\bi_\bm_\be(3).
The corresponding _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt is an integer representing the
- number of seconds since the epoch. Two special argument
- values may be used: -1 represents the current time, and
- -2 represents the time the shell was invoked. If no ar-
+ number of seconds since the epoch. Two special argument
+ values may be used: -1 represents the current time, and
+ -2 represents the time the shell was invoked. If no ar-
gument is specified, conversion behaves as if -1 had been
- given. This is an exception to the usual p\bpr\bri\bin\bnt\btf\bf behav-
+ given. This is an exception to the usual p\bpr\bri\bin\bnt\btf\bf behav-
ior.
The %b, %q, and %T format specifiers all use the field width and
precision arguments from the format specification and write that
- many bytes from (or use that wide a field for) the expanded ar-
- gument, which usually contains more characters than the origi-
+ many bytes from (or use that wide a field for) the expanded ar-
+ gument, which usually contains more characters than the origi-
nal.
The %n format specifier accepts a corresponding argument that is
treated as a shell variable name.
- The %s and %c format specifiers accept an l (long) modifier,
+ The %s and %c format specifiers accept an l (long) modifier,
which forces them to convert the argument string to a wide-char-
acter string and apply any supplied field width and precision in
terms of characters, not bytes.
- Arguments to non-string format specifiers are treated as C con-
+ Arguments to non-string format specifiers are treated as C con-
stants, except that a leading plus or minus sign is allowed, and
- if the leading character is a single or double quote, the value
+ if the leading character is a single or double quote, the value
is the ASCII value of the following character.
- The _\bf_\bo_\br_\bm_\ba_\bt is reused as necessary to consume all of the _\ba_\br_\bg_\bu_\b-
+ The _\bf_\bo_\br_\bm_\ba_\bt is reused as necessary to consume all of the _\ba_\br_\bg_\bu_\b-
_\bm_\be_\bn_\bt_\bs. If the _\bf_\bo_\br_\bm_\ba_\bt requires more _\ba_\br_\bg_\bu_\bm_\be_\bn_\bt_\bs than are supplied,
- the extra format specifications behave as if a zero value or
- null string, as appropriate, had been supplied. The return
- value is zero on success, non-zero if an invalid option is sup-
+ the extra format specifications behave as if a zero value or
+ null string, as appropriate, had been supplied. The return
+ value is zero on success, non-zero if an invalid option is sup-
plied or a write or assignment error occurs.
p\bpu\bus\bsh\bhd\bd [-\b-n\bn] [+_\bn] [-_\bn]
p\bpu\bus\bsh\bhd\bd [-\b-n\bn] [_\bd_\bi_\br]
- Adds a directory to the top of the directory stack, or rotates
- the stack, making the new top of the stack the current working
- directory. With no arguments, p\bpu\bus\bsh\bhd\bd exchanges the top two ele-
- ments of the directory stack. Arguments, if supplied, have the
+ Adds a directory to the top of the directory stack, or rotates
+ the stack, making the new top of the stack the current working
+ directory. With no arguments, p\bpu\bus\bsh\bhd\bd exchanges the top two ele-
+ ments of the directory stack. Arguments, if supplied, have the
following meanings:
- -\b-n\bn Suppresses the normal change of directory when rotating
- or adding directories to the stack, so that only the
+ -\b-n\bn Suppresses the normal change of directory when rotating
+ or adding directories to the stack, so that only the
stack is manipulated.
- +\b+_\bn Rotates the stack so that the _\bnth directory (counting
- from the left of the list shown by d\bdi\bir\brs\bs, starting with
+ +\b+_\bn Rotates the stack so that the _\bnth directory (counting
+ from the left of the list shown by d\bdi\bir\brs\bs, starting with
zero) is at the top.
- -\b-_\bn Rotates the stack so that the _\bnth directory (counting
- from the right of the list shown by d\bdi\bir\brs\bs, starting with
+ -\b-_\bn Rotates the stack so that the _\bnth directory (counting
+ from the right of the list shown by d\bdi\bir\brs\bs, starting with
zero) is at the top.
_\bd_\bi_\br Adds _\bd_\bi_\br to the directory stack at the top
After the stack has been modified, if the -\b-n\bn option was not sup-
- plied, p\bpu\bus\bsh\bhd\bd uses the c\bcd\bd builtin to change to the directory at
+ plied, p\bpu\bus\bsh\bhd\bd uses the c\bcd\bd builtin to change to the directory at
the top of the stack. If the c\bcd\bd fails, p\bpu\bus\bsh\bhd\bd returns a non-zero
value.
- Otherwise, if no arguments are supplied, p\bpu\bus\bsh\bhd\bd returns 0 unless
- the directory stack is empty. When rotating the directory
- stack, p\bpu\bus\bsh\bhd\bd returns 0 unless the directory stack is empty or a
+ Otherwise, if no arguments are supplied, p\bpu\bus\bsh\bhd\bd returns 0 unless
+ the directory stack is empty. When rotating the directory
+ stack, p\bpu\bus\bsh\bhd\bd returns 0 unless the directory stack is empty or a
non-existent directory stack element is specified.
- If the p\bpu\bus\bsh\bhd\bd command is successful, bash runs d\bdi\bir\brs\bs to show the
+ If the p\bpu\bus\bsh\bhd\bd command is successful, bash runs d\bdi\bir\brs\bs to show the
final contents of the directory stack.
p\bpw\bwd\bd [-\b-L\bLP\bP]
- Print the absolute pathname of the current working directory.
+ Print the absolute pathname of the current working directory.
The pathname printed contains no symbolic links if the -\b-P\bP option
is supplied or the -\b-o\bo p\bph\bhy\bys\bsi\bic\bca\bal\bl option to the s\bse\bet\bt builtin command
- is enabled. If the -\b-L\bL option is used, the pathname printed may
- contain symbolic links. The return status is 0 unless an error
+ is enabled. If the -\b-L\bL option is used, the pathname printed may
+ contain symbolic links. The return status is 0 unless an error
occurs while reading the name of the current directory or an in-
valid option is supplied.
r\bre\bea\bad\bd [-\b-e\ber\brs\bs] [-\b-a\ba _\ba_\bn_\ba_\bm_\be] [-\b-d\bd _\bd_\be_\bl_\bi_\bm] [-\b-i\bi _\bt_\be_\bx_\bt] [-\b-n\bn _\bn_\bc_\bh_\ba_\br_\bs] [-\b-N\bN _\bn_\bc_\bh_\ba_\br_\bs] [-\b-p\bp
_\bp_\br_\bo_\bm_\bp_\bt] [-\b-t\bt _\bt_\bi_\bm_\be_\bo_\bu_\bt] [-\b-u\bu _\bf_\bd] [_\bn_\ba_\bm_\be ...]
- One line is read from the standard input, or from the file de-
+ One line is read from the standard input, or from the file de-
scriptor _\bf_\bd supplied as an argument to the -\b-u\bu option, split into
- words as described above under W\bWo\bor\brd\bd S\bSp\bpl\bli\bit\btt\bti\bin\bng\bg, and the first
- word is assigned to the first _\bn_\ba_\bm_\be, the second word to the sec-
- ond _\bn_\ba_\bm_\be, and so on. If there are more words than names, the
+ words as described above under W\bWo\bor\brd\bd S\bSp\bpl\bli\bit\btt\bti\bin\bng\bg, and the first
+ word is assigned to the first _\bn_\ba_\bm_\be, the second word to the sec-
+ ond _\bn_\ba_\bm_\be, and so on. If there are more words than names, the
remaining words and their intervening delimiters are assigned to
- the last _\bn_\ba_\bm_\be. If there are fewer words read from the input
- stream than names, the remaining names are assigned empty val-
- ues. The characters in I\bIF\bFS\bS are used to split the line into
- words using the same rules the shell uses for expansion (de-
- scribed above under W\bWo\bor\brd\bd S\bSp\bpl\bli\bit\btt\bti\bin\bng\bg). The backslash character
+ the last _\bn_\ba_\bm_\be. If there are fewer words read from the input
+ stream than names, the remaining names are assigned empty val-
+ ues. The characters in I\bIF\bFS\bS are used to split the line into
+ words using the same rules the shell uses for expansion (de-
+ scribed above under W\bWo\bor\brd\bd S\bSp\bpl\bli\bit\btt\bti\bin\bng\bg). The backslash character
(\\b\) may be used to remove any special meaning for the next char-
- acter read and for line continuation. Options, if supplied,
+ acter read and for line continuation. Options, if supplied,
have the following meanings:
-\b-a\ba _\ba_\bn_\ba_\bm_\be
The words are assigned to sequential indices of the array
variable _\ba_\bn_\ba_\bm_\be, starting at 0. _\ba_\bn_\ba_\bm_\be is unset before any
- new values are assigned. Other _\bn_\ba_\bm_\be arguments are ig-
+ new values are assigned. Other _\bn_\ba_\bm_\be arguments are ig-
nored.
-\b-d\bd _\bd_\be_\bl_\bi_\bm
The first character of _\bd_\be_\bl_\bi_\bm is used to terminate the in-
- put line, rather than newline. If _\bd_\be_\bl_\bi_\bm is the empty
- string, r\bre\bea\bad\bd will terminate a line when it reads a NUL
+ put line, rather than newline. If _\bd_\be_\bl_\bi_\bm is the empty
+ string, r\bre\bea\bad\bd will terminate a line when it reads a NUL
character.
-\b-e\be If the standard input is coming from a terminal, r\bre\bea\bad\bdl\bli\bin\bne\be
- (see R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE above) is used to obtain the line. Read-
- line uses the current (or default, if line editing was
- not previously active) editing settings, but uses read-
+ (see R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE above) is used to obtain the line. Read-
+ line uses the current (or default, if line editing was
+ not previously active) editing settings, but uses read-
line's default filename completion.
-\b-i\bi _\bt_\be_\bx_\bt
- If r\bre\bea\bad\bdl\bli\bin\bne\be is being used to read the line, _\bt_\be_\bx_\bt is
+ If r\bre\bea\bad\bdl\bli\bin\bne\be is being used to read the line, _\bt_\be_\bx_\bt is
placed into the editing buffer before editing begins.
-\b-n\bn _\bn_\bc_\bh_\ba_\br_\bs
- r\bre\bea\bad\bd returns after reading _\bn_\bc_\bh_\ba_\br_\bs characters rather than
+ r\bre\bea\bad\bd returns after reading _\bn_\bc_\bh_\ba_\br_\bs characters rather than
waiting for a complete line of input, but honors a delim-
- iter if fewer than _\bn_\bc_\bh_\ba_\br_\bs characters are read before the
+ iter if fewer than _\bn_\bc_\bh_\ba_\br_\bs characters are read before the
delimiter.
-\b-N\bN _\bn_\bc_\bh_\ba_\br_\bs
- r\bre\bea\bad\bd returns after reading exactly _\bn_\bc_\bh_\ba_\br_\bs characters
- rather than waiting for a complete line of input, unless
- EOF is encountered or r\bre\bea\bad\bd times out. Delimiter charac-
- ters encountered in the input are not treated specially
- and do not cause r\bre\bea\bad\bd to return until _\bn_\bc_\bh_\ba_\br_\bs characters
- are read. The result is not split on the characters in
- I\bIF\bFS\bS; the intent is that the variable is assigned exactly
+ r\bre\bea\bad\bd returns after reading exactly _\bn_\bc_\bh_\ba_\br_\bs characters
+ rather than waiting for a complete line of input, unless
+ EOF is encountered or r\bre\bea\bad\bd times out. Delimiter charac-
+ ters encountered in the input are not treated specially
+ and do not cause r\bre\bea\bad\bd to return until _\bn_\bc_\bh_\ba_\br_\bs characters
+ are read. The result is not split on the characters in
+ I\bIF\bFS\bS; the intent is that the variable is assigned exactly
the characters read (with the exception of backslash; see
the -\b-r\br option below).
-\b-p\bp _\bp_\br_\bo_\bm_\bp_\bt
line, before attempting to read any input. The prompt is
displayed only if input is coming from a terminal.
-\b-r\br Backslash does not act as an escape character. The back-
- slash is considered to be part of the line. In particu-
- lar, a backslash-newline pair may not then be used as a
+ slash is considered to be part of the line. In particu-
+ lar, a backslash-newline pair may not then be used as a
line continuation.
-\b-s\bs Silent mode. If input is coming from a terminal, charac-
ters are not echoed.
-\b-t\bt _\bt_\bi_\bm_\be_\bo_\bu_\bt
- Cause r\bre\bea\bad\bd to time out and return failure if a complete
- line of input (or a specified number of characters) is
- not read within _\bt_\bi_\bm_\be_\bo_\bu_\bt seconds. _\bt_\bi_\bm_\be_\bo_\bu_\bt may be a deci-
- mal number with a fractional portion following the deci-
- mal point. This option is only effective if r\bre\bea\bad\bd is
- reading input from a terminal, pipe, or other special
- file; it has no effect when reading from regular files.
+ Cause r\bre\bea\bad\bd to time out and return failure if a complete
+ line of input (or a specified number of characters) is
+ not read within _\bt_\bi_\bm_\be_\bo_\bu_\bt seconds. _\bt_\bi_\bm_\be_\bo_\bu_\bt may be a deci-
+ mal number with a fractional portion following the deci-
+ mal point. This option is only effective if r\bre\bea\bad\bd is
+ reading input from a terminal, pipe, or other special
+ file; it has no effect when reading from regular files.
If r\bre\bea\bad\bd times out, r\bre\bea\bad\bd saves any partial input read into
- the specified variable _\bn_\ba_\bm_\be. If _\bt_\bi_\bm_\be_\bo_\bu_\bt is 0, r\bre\bea\bad\bd re-
- turns immediately, without trying to read any data. The
- exit status is 0 if input is available on the specified
- file descriptor, or the read will return EOF, non-zero
- otherwise. The exit status is greater than 128 if the
+ the specified variable _\bn_\ba_\bm_\be. If _\bt_\bi_\bm_\be_\bo_\bu_\bt is 0, r\bre\bea\bad\bd re-
+ turns immediately, without trying to read any data. The
+ exit status is 0 if input is available on the specified
+ file descriptor, or the read will return EOF, non-zero
+ otherwise. The exit status is greater than 128 if the
timeout is exceeded.
-\b-u\bu _\bf_\bd Read input from file descriptor _\bf_\bd.
- If no _\bn_\ba_\bm_\be_\bs are supplied, the line read, without the ending de-
- limiter but otherwise unmodified, is assigned to the variable
- R\bRE\bEP\bPL\bLY\bY. The exit status is zero, unless end-of-file is encoun-
- tered, r\bre\bea\bad\bd times out (in which case the status is greater than
- 128), a variable assignment error (such as assigning to a read-
+ If no _\bn_\ba_\bm_\be_\bs are supplied, the line read, without the ending de-
+ limiter but otherwise unmodified, is assigned to the variable
+ R\bRE\bEP\bPL\bLY\bY. The exit status is zero, unless end-of-file is encoun-
+ tered, r\bre\bea\bad\bd times out (in which case the status is greater than
+ 128), a variable assignment error (such as assigning to a read-
only variable) occurs, or an invalid file descriptor is supplied
as the argument to -\b-u\bu.
r\bre\bea\bad\bdo\bon\bnl\bly\by [-\b-a\baA\bAf\bf] [-\b-p\bp] [_\bn_\ba_\bm_\be[=_\bw_\bo_\br_\bd] ...]
- The given _\bn_\ba_\bm_\be_\bs are marked readonly; the values of these _\bn_\ba_\bm_\be_\bs
- may not be changed by subsequent assignment. If the -\b-f\bf option
- is supplied, the functions corresponding to the _\bn_\ba_\bm_\be_\bs are so
- marked. The -\b-a\ba option restricts the variables to indexed ar-
- rays; the -\b-A\bA option restricts the variables to associative ar-
+ The given _\bn_\ba_\bm_\be_\bs are marked readonly; the values of these _\bn_\ba_\bm_\be_\bs
+ may not be changed by subsequent assignment. If the -\b-f\bf option
+ is supplied, the functions corresponding to the _\bn_\ba_\bm_\be_\bs are so
+ marked. The -\b-a\ba option restricts the variables to indexed ar-
+ rays; the -\b-A\bA option restricts the variables to associative ar-
rays. If both options are supplied, -\b-A\bA takes precedence. If no
- _\bn_\ba_\bm_\be arguments are given, or if the -\b-p\bp option is supplied, a
+ _\bn_\ba_\bm_\be arguments are given, or if the -\b-p\bp option is supplied, a
list of all readonly names is printed. The other options may be
- used to restrict the output to a subset of the set of readonly
- names. The -\b-p\bp option causes output to be displayed in a format
- that may be reused as input. If a variable name is followed by
- =_\bw_\bo_\br_\bd, the value of the variable is set to _\bw_\bo_\br_\bd. The return
- status is 0 unless an invalid option is encountered, one of the
+ used to restrict the output to a subset of the set of readonly
+ names. The -\b-p\bp option causes output to be displayed in a format
+ that may be reused as input. If a variable name is followed by
+ =_\bw_\bo_\br_\bd, the value of the variable is set to _\bw_\bo_\br_\bd. The return
+ status is 0 unless an invalid option is encountered, one of the
_\bn_\ba_\bm_\be_\bs is not a valid shell variable name, or -\b-f\bf is supplied with
a _\bn_\ba_\bm_\be that is not a function.
r\bre\bet\btu\bur\brn\bn [_\bn]
- Causes a function to stop executing and return the value speci-
- fied by _\bn to its caller. If _\bn is omitted, the return status is
- that of the last command executed in the function body. If r\bre\be-\b-
+ Causes a function to stop executing and return the value speci-
+ fied by _\bn to its caller. If _\bn is omitted, the return status is
+ that of the last command executed in the function body. If r\bre\be-\b-
t\btu\bur\brn\bn is executed by a trap handler, the last command used to de-
- termine the status is the last command executed before the trap
- handler. If r\bre\bet\btu\bur\brn\bn is executed during a D\bDE\bEB\bBU\bUG\bG trap, the last
- command used to determine the status is the last command exe-
- cuted by the trap handler before r\bre\bet\btu\bur\brn\bn was invoked. If r\bre\bet\btu\bur\brn\bn
- is used outside a function, but during execution of a script by
- the .\b. (s\bso\bou\bur\brc\bce\be) command, it causes the shell to stop executing
- that script and return either _\bn or the exit status of the last
- command executed within the script as the exit status of the
+ termine the status is the last command executed before the trap
+ handler. If r\bre\bet\btu\bur\brn\bn is executed during a D\bDE\bEB\bBU\bUG\bG trap, the last
+ command used to determine the status is the last command exe-
+ cuted by the trap handler before r\bre\bet\btu\bur\brn\bn was invoked. If r\bre\bet\btu\bur\brn\bn
+ is used outside a function, but during execution of a script by
+ the .\b. (s\bso\bou\bur\brc\bce\be) command, it causes the shell to stop executing
+ that script and return either _\bn or the exit status of the last
+ command executed within the script as the exit status of the
script. If _\bn is supplied, the return value is its least signif-
- icant 8 bits. The return status is non-zero if r\bre\bet\btu\bur\brn\bn is sup-
- plied a non-numeric argument, or is used outside a function and
- not during execution of a script by .\b. or s\bso\bou\bur\brc\bce\be. Any command
+ icant 8 bits. The return status is non-zero if r\bre\bet\btu\bur\brn\bn is sup-
+ plied a non-numeric argument, or is used outside a function and
+ not during execution of a script by .\b. or s\bso\bou\bur\brc\bce\be. Any command
associated with the R\bRE\bET\bTU\bUR\bRN\bN trap is executed before execution re-
sumes after the function or script.
s\bse\bet\bt [-\b-a\bab\bbe\bef\bfh\bhk\bkm\bmn\bnp\bpt\btu\buv\bvx\bxB\bBC\bCE\bEH\bHP\bPT\bT] [-\b-o\bo _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be] [-\b--\b-] [-\b-] [_\ba_\br_\bg ...]
s\bse\bet\bt [+\b+a\bab\bbe\bef\bfh\bhk\bkm\bmn\bnp\bpt\btu\buv\bvx\bxB\bBC\bCE\bEH\bHP\bPT\bT] [+\b+o\bo _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be] [-\b--\b-] [-\b-] [_\ba_\br_\bg ...]
- Without options, display the name and value of each shell vari-
- able in a format that can be reused as input for setting or re-
+ s\bse\bet\bt -\b-o\bo
+ s\bse\bet\bt +\b+o\bo Without options, display the name and value of each shell vari-
+ able in a format that can be reused as input for setting or re-
setting the currently-set variables. Read-only variables cannot
- be reset. In _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be, only shell variables are listed. The
- output is sorted according to the current locale. When options
- are specified, they set or unset shell attributes. Any argu-
- ments remaining after option processing are treated as values
+ be reset. In _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be, only shell variables are listed. The
+ output is sorted according to the current locale. When options
+ are specified, they set or unset shell attributes. Any argu-
+ ments remaining after option processing are treated as values
for the positional parameters and are assigned, in order, to $\b$1\b1,
- $\b$2\b2, .\b..\b..\b. $\b$_\bn. Options, if specified, have the following mean-
+ $\b$2\b2, .\b..\b..\b. $\b$_\bn. Options, if specified, have the following mean-
ings:
-\b-a\ba Each variable or function that is created or modified is
- given the export attribute and marked for export to the
+ given the export attribute and marked for export to the
environment of subsequent commands.
- -\b-b\bb Report the status of terminated background jobs immedi-
+ -\b-b\bb Report the status of terminated background jobs immedi-
ately, rather than before the next primary prompt. This
is effective only when job control is enabled.
- -\b-e\be Exit immediately if a _\bp_\bi_\bp_\be_\bl_\bi_\bn_\be (which may consist of a
- single _\bs_\bi_\bm_\bp_\bl_\be _\bc_\bo_\bm_\bm_\ba_\bn_\bd), a _\bl_\bi_\bs_\bt, or a _\bc_\bo_\bm_\bp_\bo_\bu_\bn_\bd _\bc_\bo_\bm_\bm_\ba_\bn_\bd
+ -\b-e\be Exit immediately if a _\bp_\bi_\bp_\be_\bl_\bi_\bn_\be (which may consist of a
+ single _\bs_\bi_\bm_\bp_\bl_\be _\bc_\bo_\bm_\bm_\ba_\bn_\bd), a _\bl_\bi_\bs_\bt, or a _\bc_\bo_\bm_\bp_\bo_\bu_\bn_\bd _\bc_\bo_\bm_\bm_\ba_\bn_\bd
(see S\bSH\bHE\bEL\bLL\bL G\bGR\bRA\bAM\bMM\bMA\bAR\bR above), exits with a non-zero status.
- The shell does not exit if the command that fails is
- part of the command list immediately following a w\bwh\bhi\bil\ble\be
- or u\bun\bnt\bti\bil\bl keyword, part of the test following the i\bif\bf or
- e\bel\bli\bif\bf reserved words, part of any command executed in a
- &\b&&\b& or |\b||\b| list except the command following the final &\b&&\b&
+ The shell does not exit if the command that fails is
+ part of the command list immediately following a w\bwh\bhi\bil\ble\be
+ or u\bun\bnt\bti\bil\bl keyword, part of the test following the i\bif\bf or
+ e\bel\bli\bif\bf reserved words, part of any command executed in a
+ &\b&&\b& or |\b||\b| list except the command following the final &\b&&\b&
or |\b||\b|, any command in a pipeline but the last, or if the
- command's return value is being inverted with !\b!. If a
- compound command other than a subshell returns a non-
- zero status because a command failed while -\b-e\be was being
- ignored, the shell does not exit. A trap on E\bER\bRR\bR, if
- set, is executed before the shell exits. This option
+ command's return value is being inverted with !\b!. If a
+ compound command other than a subshell returns a non-
+ zero status because a command failed while -\b-e\be was being
+ ignored, the shell does not exit. A trap on E\bER\bRR\bR, if
+ set, is executed before the shell exits. This option
applies to the shell environment and each subshell envi-
- ronment separately (see C\bCO\bOM\bMM\bMA\bAN\bND\bD E\bEX\bXE\bEC\bCU\bUT\bTI\bIO\bON\bN E\bEN\bNV\bVI\bIR\bRO\bON\bNM\bME\bEN\bNT\bT
+ ronment separately (see C\bCO\bOM\bMM\bMA\bAN\bND\bD E\bEX\bXE\bEC\bCU\bUT\bTI\bIO\bON\bN E\bEN\bNV\bVI\bIR\bRO\bON\bNM\bME\bEN\bNT\bT
above), and may cause subshells to exit before executing
all the commands in the subshell.
- If a compound command or shell function executes in a
- context where -\b-e\be is being ignored, none of the commands
- executed within the compound command or function body
- will be affected by the -\b-e\be setting, even if -\b-e\be is set
- and a command returns a failure status. If a compound
- command or shell function sets -\b-e\be while executing in a
- context where -\b-e\be is ignored, that setting will not have
- any effect until the compound command or the command
+ If a compound command or shell function executes in a
+ context where -\b-e\be is being ignored, none of the commands
+ executed within the compound command or function body
+ will be affected by the -\b-e\be setting, even if -\b-e\be is set
+ and a command returns a failure status. If a compound
+ command or shell function sets -\b-e\be while executing in a
+ context where -\b-e\be is ignored, that setting will not have
+ any effect until the compound command or the command
containing the function call completes.
-\b-f\bf Disable pathname expansion.
- -\b-h\bh Remember the location of commands as they are looked up
+ -\b-h\bh Remember the location of commands as they are looked up
for execution. This is enabled by default.
- -\b-k\bk All arguments in the form of assignment statements are
- placed in the environment for a command, not just those
+ -\b-k\bk All arguments in the form of assignment statements are
+ placed in the environment for a command, not just those
that precede the command name.
- -\b-m\bm Monitor mode. Job control is enabled. This option is
- on by default for interactive shells on systems that
- support it (see J\bJO\bOB\bB C\bCO\bON\bNT\bTR\bRO\bOL\bL above). All processes run
+ -\b-m\bm Monitor mode. Job control is enabled. This option is
+ on by default for interactive shells on systems that
+ support it (see J\bJO\bOB\bB C\bCO\bON\bNT\bTR\bRO\bOL\bL above). All processes run
in a separate process group. When a background job com-
pletes, the shell prints a line containing its exit sta-
tus.
-\b-n\bn Read commands but do not execute them. This may be used
- to check a shell script for syntax errors. This is ig-
+ to check a shell script for syntax errors. This is ig-
nored by interactive shells.
-\b-o\bo _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be
The _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be can be one of the following:
Same as -\b-a\ba.
b\bbr\bra\bac\bce\bee\bex\bxp\bpa\ban\bnd\bd
Same as -\b-B\bB.
- e\bem\bma\bac\bcs\bs Use an emacs-style command line editing inter-
+ e\bem\bma\bac\bcs\bs Use an emacs-style command line editing inter-
face. This is enabled by default when the shell
is interactive, unless the shell is started with
- the -\b--\b-n\bno\boe\bed\bdi\bit\bti\bin\bng\bg option. This also affects the
+ the -\b--\b-n\bno\boe\bed\bdi\bit\bti\bin\bng\bg option. This also affects the
editing interface used for r\bre\bea\bad\bd -\b-e\be.
e\ber\brr\bre\bex\bxi\bit\bt Same as -\b-e\be.
e\ber\brr\brt\btr\bra\bac\bce\be
H\bHI\bIS\bST\bTO\bOR\bRY\bY. This option is on by default in inter-
active shells.
i\big\bgn\bno\bor\bre\bee\beo\bof\bf
- The effect is as if the shell command ``IG-
- NOREEOF=10'' had been executed (see S\bSh\bhe\bel\bll\bl V\bVa\bar\bri\bi-\b-
+ The effect is as if the shell command ``IG-
+ NOREEOF=10'' had been executed (see S\bSh\bhe\bel\bll\bl V\bVa\bar\bri\bi-\b-
a\bab\bbl\ble\bes\bs above).
k\bke\bey\byw\bwo\bor\brd\bd Same as -\b-k\bk.
m\bmo\bon\bni\bit\bto\bor\br Same as -\b-m\bm.
p\bph\bhy\bys\bsi\bic\bca\bal\bl
Same as -\b-P\bP.
p\bpi\bip\bpe\bef\bfa\bai\bil\bl
- If set, the return value of a pipeline is the
- value of the last (rightmost) command to exit
- with a non-zero status, or zero if all commands
- in the pipeline exit successfully. This option
+ If set, the return value of a pipeline is the
+ value of the last (rightmost) command to exit
+ with a non-zero status, or zero if all commands
+ in the pipeline exit successfully. This option
is disabled by default.
- p\bpo\bos\bsi\bix\bx Change the behavior of b\bba\bas\bsh\bh where the default
- operation differs from the POSIX standard to
- match the standard (_\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be). See S\bSE\bEE\bE A\bAL\bLS\bSO\bO
+ p\bpo\bos\bsi\bix\bx Change the behavior of b\bba\bas\bsh\bh where the default
+ operation differs from the POSIX standard to
+ match the standard (_\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be). See S\bSE\bEE\bE A\bAL\bLS\bSO\bO
below for a reference to a document that details
how posix mode affects bash's behavior.
p\bpr\bri\biv\bvi\bil\ble\beg\bge\bed\bd
Same as -\b-p\bp.
v\bve\ber\brb\bbo\bos\bse\be Same as -\b-v\bv.
- v\bvi\bi Use a vi-style command line editing interface.
+ v\bvi\bi Use a vi-style command line editing interface.
This also affects the editing interface used for
r\bre\bea\bad\bd -\b-e\be.
x\bxt\btr\bra\bac\bce\be Same as -\b-x\bx.
- If -\b-o\bo is supplied with no _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be, the values of the
- current options are printed. If +\b+o\bo is supplied with no
- _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be, a series of s\bse\bet\bt commands to recreate the
- current option settings is displayed on the standard
+ If -\b-o\bo is supplied with no _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be, s\bse\bet\bt prints the
+ current shell option settings. If +\b+o\bo is supplied with
+ no _\bo_\bp_\bt_\bi_\bo_\bn_\b-_\bn_\ba_\bm_\be, s\bse\bet\bt prints a series of s\bse\bet\bt commands to
+ recreate the current option settings on the standard
output.
- -\b-p\bp Turn on _\bp_\br_\bi_\bv_\bi_\bl_\be_\bg_\be_\bd mode. In this mode, the $\b$E\bEN\bNV\bV and
- $\b$B\bBA\bAS\bSH\bH_\b_E\bEN\bNV\bV files are not processed, shell functions are
- not inherited from the environment, and the S\bSH\bHE\bEL\bLL\bLO\bOP\bPT\bTS\bS,
- B\bBA\bAS\bSH\bHO\bOP\bPT\bTS\bS, C\bCD\bDP\bPA\bAT\bTH\bH, and G\bGL\bLO\bOB\bBI\bIG\bGN\bNO\bOR\bRE\bE variables, if they ap-
- pear in the environment, are ignored. If the shell is
- started with the effective user (group) id not equal to
- the real user (group) id, and the -\b-p\bp option is not sup-
+ -\b-p\bp Turn on _\bp_\br_\bi_\bv_\bi_\bl_\be_\bg_\be_\bd mode. In this mode, the $\b$E\bEN\bNV\bV and
+ $\b$B\bBA\bAS\bSH\bH_\b_E\bEN\bNV\bV files are not processed, shell functions are
+ not inherited from the environment, and the S\bSH\bHE\bEL\bLL\bLO\bOP\bPT\bTS\bS,
+ B\bBA\bAS\bSH\bHO\bOP\bPT\bTS\bS, C\bCD\bDP\bPA\bAT\bTH\bH, and G\bGL\bLO\bOB\bBI\bIG\bGN\bNO\bOR\bRE\bE variables, if they ap-
+ pear in the environment, are ignored. If the shell is
+ started with the effective user (group) id not equal to
+ the real user (group) id, and the -\b-p\bp option is not sup-
plied, these actions are taken and the effective user id
- is set to the real user id. If the -\b-p\bp option is sup-
- plied at startup, the effective user id is not reset.
- Turning this option off causes the effective user and
+ is set to the real user id. If the -\b-p\bp option is sup-
+ plied at startup, the effective user id is not reset.
+ Turning this option off causes the effective user and
group ids to be set to the real user and group ids.
-\b-r\br Enable restricted shell mode. This option cannot be un-
set once it has been set.
-\b-t\bt Exit after reading and executing one command.
-\b-u\bu Treat unset variables and parameters other than the spe-
- cial parameters "@" and "*", or array variables sub-
- scripted with "@" or "*", as an error when performing
- parameter expansion. If expansion is attempted on an
- unset variable or parameter, the shell prints an error
- message, and, if not interactive, exits with a non-zero
+ cial parameters "@" and "*", or array variables sub-
+ scripted with "@" or "*", as an error when performing
+ parameter expansion. If expansion is attempted on an
+ unset variable or parameter, the shell prints an error
+ message, and, if not interactive, exits with a non-zero
status.
-\b-v\bv Print shell input lines as they are read.
- -\b-x\bx After expanding each _\bs_\bi_\bm_\bp_\bl_\be _\bc_\bo_\bm_\bm_\ba_\bn_\bd, f\bfo\bor\br command, c\bca\bas\bse\be
+ -\b-x\bx After expanding each _\bs_\bi_\bm_\bp_\bl_\be _\bc_\bo_\bm_\bm_\ba_\bn_\bd, f\bfo\bor\br command, c\bca\bas\bse\be
command, s\bse\bel\ble\bec\bct\bt command, or arithmetic f\bfo\bor\br command, dis-
- play the expanded value of P\bPS\bS4\b4, followed by the command
- and its expanded arguments or associated word list, to
+ play the expanded value of P\bPS\bS4\b4, followed by the command
+ and its expanded arguments or associated word list, to
standard error.
- -\b-B\bB The shell performs brace expansion (see B\bBr\bra\bac\bce\be E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn
+ -\b-B\bB The shell performs brace expansion (see B\bBr\bra\bac\bce\be E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn
above). This is on by default.
- -\b-C\bC If set, b\bba\bas\bsh\bh does not overwrite an existing file with
- the >\b>, >\b>&\b&, and <\b<>\b> redirection operators. This may be
+ -\b-C\bC If set, b\bba\bas\bsh\bh does not overwrite an existing file with
+ the >\b>, >\b>&\b&, and <\b<>\b> redirection operators. This may be
overridden when creating output files by using the redi-
rection operator >\b>|\b| instead of >\b>.
-\b-E\bE If set, any trap on E\bER\bRR\bR is inherited by shell functions,
- command substitutions, and commands executed in a sub-
- shell environment. The E\bER\bRR\bR trap is normally not inher-
+ command substitutions, and commands executed in a sub-
+ shell environment. The E\bER\bRR\bR trap is normally not inher-
ited in such cases.
-\b-H\bH Enable !\b! style history substitution. This option is on
by default when the shell is interactive.
- -\b-P\bP If set, the shell does not resolve symbolic links when
- executing commands such as c\bcd\bd that change the current
+ -\b-P\bP If set, the shell does not resolve symbolic links when
+ executing commands such as c\bcd\bd that change the current
working directory. It uses the physical directory
structure instead. By default, b\bba\bas\bsh\bh follows the logical
- chain of directories when performing commands which
+ chain of directories when performing commands which
change the current directory.
- -\b-T\bT If set, any traps on D\bDE\bEB\bBU\bUG\bG and R\bRE\bET\bTU\bUR\bRN\bN are inherited by
+ -\b-T\bT If set, any traps on D\bDE\bEB\bBU\bUG\bG and R\bRE\bET\bTU\bUR\bRN\bN are inherited by
shell functions, command substitutions, and commands ex-
- ecuted in a subshell environment. The D\bDE\bEB\bBU\bUG\bG and R\bRE\bET\bTU\bUR\bRN\bN
+ ecuted in a subshell environment. The D\bDE\bEB\bBU\bUG\bG and R\bRE\bET\bTU\bUR\bRN\bN
traps are normally not inherited in such cases.
- -\b--\b- If no arguments follow this option, then the positional
+ -\b--\b- If no arguments follow this option, then the positional
parameters are unset. Otherwise, the positional parame-
- ters are set to the _\ba_\br_\bgs, even if some of them begin
+ ters are set to the _\ba_\br_\bgs, even if some of them begin
with a -\b-.
- -\b- Signal the end of options, cause all remaining _\ba_\br_\bgs to
+ -\b- Signal the end of options, cause all remaining _\ba_\br_\bgs to
be assigned to the positional parameters. The -\b-x\bx and -\b-v\bv
options are turned off. If there are no _\ba_\br_\bgs, the posi-
tional parameters remain unchanged.
- The options are off by default unless otherwise noted. Using +
- rather than - causes these options to be turned off. The op-
+ The options are off by default unless otherwise noted. Using +
+ rather than - causes these options to be turned off. The op-
tions can also be specified as arguments to an invocation of the
- shell. The current set of options may be found in $\b$-\b-. The re-
- turn status is always true unless an invalid option is encoun-
+ shell. The current set of options may be found in $\b$-\b-. The re-
+ turn status is always true unless an invalid option is encoun-
tered.
s\bsh\bhi\bif\bft\bt [_\bn]
- The positional parameters from _\bn+1 ... are renamed to $\b$1\b1 .\b..\b..\b..\b.
- Parameters represented by the numbers $\b$#\b# down to $\b$#\b#-_\bn+1 are un-
- set. _\bn must be a non-negative number less than or equal to $\b$#\b#.
- If _\bn is 0, no parameters are changed. If _\bn is not given, it is
+ The positional parameters from _\bn+1 ... are renamed to $\b$1\b1 .\b..\b..\b..\b.
+ Parameters represented by the numbers $\b$#\b# down to $\b$#\b#-_\bn+1 are un-
+ set. _\bn must be a non-negative number less than or equal to $\b$#\b#.
+ If _\bn is 0, no parameters are changed. If _\bn is not given, it is
assumed to be 1. If _\bn is greater than $\b$#\b#, the positional param-
- eters are not changed. The return status is greater than zero
+ eters are not changed. The return status is greater than zero
if _\bn is greater than $\b$#\b# or less than zero; otherwise 0.
s\bsh\bho\bop\bpt\bt [-\b-p\bpq\bqs\bsu\bu] [-\b-o\bo] [_\bo_\bp_\bt_\bn_\ba_\bm_\be ...]
- Toggle the values of settings controlling optional shell behav-
- ior. The settings can be either those listed below, or, if the
+ Toggle the values of settings controlling optional shell behav-
+ ior. The settings can be either those listed below, or, if the
-\b-o\bo option is used, those available with the -\b-o\bo option to the s\bse\bet\bt
builtin command. With no options, or with the -\b-p\bp option, a list
- of all settable options is displayed, with an indication of
+ of all settable options is displayed, with an indication of
whether or not each is set; if _\bo_\bp_\bt_\bn_\ba_\bm_\be_\bs are supplied, the output
- is restricted to those options. The -\b-p\bp option causes output to
- be displayed in a form that may be reused as input. Other op-
+ is restricted to those options. The -\b-p\bp option causes output to
+ be displayed in a form that may be reused as input. Other op-
tions have the following meanings:
-\b-s\bs Enable (set) each _\bo_\bp_\bt_\bn_\ba_\bm_\be.
-\b-u\bu Disable (unset) each _\bo_\bp_\bt_\bn_\ba_\bm_\be.
- -\b-q\bq Suppresses normal output (quiet mode); the return status
+ -\b-q\bq Suppresses normal output (quiet mode); the return status
indicates whether the _\bo_\bp_\bt_\bn_\ba_\bm_\be is set or unset. If multi-
- ple _\bo_\bp_\bt_\bn_\ba_\bm_\be arguments are given with -\b-q\bq, the return sta-
- tus is zero if all _\bo_\bp_\bt_\bn_\ba_\bm_\be_\bs are enabled; non-zero other-
+ ple _\bo_\bp_\bt_\bn_\ba_\bm_\be arguments are given with -\b-q\bq, the return sta-
+ tus is zero if all _\bo_\bp_\bt_\bn_\ba_\bm_\be_\bs are enabled; non-zero other-
wise.
- -\b-o\bo Restricts the values of _\bo_\bp_\bt_\bn_\ba_\bm_\be to be those defined for
+ -\b-o\bo Restricts the values of _\bo_\bp_\bt_\bn_\ba_\bm_\be to be those defined for
the -\b-o\bo option to the s\bse\bet\bt builtin.
- If either -\b-s\bs or -\b-u\bu is used with no _\bo_\bp_\bt_\bn_\ba_\bm_\be arguments, s\bsh\bho\bop\bpt\bt
- shows only those options which are set or unset, respectively.
- Unless otherwise noted, the s\bsh\bho\bop\bpt\bt options are disabled (unset)
+ If either -\b-s\bs or -\b-u\bu is used with no _\bo_\bp_\bt_\bn_\ba_\bm_\be arguments, s\bsh\bho\bop\bpt\bt
+ shows only those options which are set or unset, respectively.
+ Unless otherwise noted, the s\bsh\bho\bop\bpt\bt options are disabled (unset)
by default.
- The return status when listing options is zero if all _\bo_\bp_\bt_\bn_\ba_\bm_\be_\bs
- are enabled, non-zero otherwise. When setting or unsetting op-
- tions, the return status is zero unless an _\bo_\bp_\bt_\bn_\ba_\bm_\be is not a
+ The return status when listing options is zero if all _\bo_\bp_\bt_\bn_\ba_\bm_\be_\bs
+ are enabled, non-zero otherwise. When setting or unsetting op-
+ tions, the return status is zero unless an _\bo_\bp_\bt_\bn_\ba_\bm_\be is not a
valid shell option.
The list of s\bsh\bho\bop\bpt\bt options is:
a\bar\brr\bra\bay\by_\b_e\bex\bxp\bpa\ban\bnd\bd_\b_o\bon\bnc\bce\be
- If set, the shell suppresses multiple evaluation of as-
+ If set, the shell suppresses multiple evaluation of as-
sociative and indexed array subscripts during arithmetic
expression evaluation, while executing builtins that can
- perform variable assignments, and while executing
+ perform variable assignments, and while executing
builtins that perform array dereferencing.
a\bas\bss\bso\boc\bc_\b_e\bex\bxp\bpa\ban\bnd\bd_\b_o\bon\bnc\bce\be
Deprecated; a synonym for a\bar\brr\bra\bay\by_\b_e\bex\bxp\bpa\ban\bnd\bd_\b_o\bon\bnc\bce\be.
- a\bau\but\bto\boc\bcd\bd If set, a command name that is the name of a directory
- is executed as if it were the argument to the c\bcd\bd com-
+ a\bau\but\bto\boc\bcd\bd If set, a command name that is the name of a directory
+ is executed as if it were the argument to the c\bcd\bd com-
mand. This option is only used by interactive shells.
c\bcd\bda\bab\bbl\ble\be_\b_v\bva\bar\brs\bs
- If set, an argument to the c\bcd\bd builtin command that is
- not a directory is assumed to be the name of a variable
+ If set, an argument to the c\bcd\bd builtin command that is
+ not a directory is assumed to be the name of a variable
whose value is the directory to change to.
c\bcd\bds\bsp\bpe\bel\bll\bl If set, minor errors in the spelling of a directory com-
- ponent in a c\bcd\bd command will be corrected. The errors
+ ponent in a c\bcd\bd command will be corrected. The errors
checked for are transposed characters, a missing charac-
- ter, and one character too many. If a correction is
- found, the corrected filename is printed, and the com-
- mand proceeds. This option is only used by interactive
+ ter, and one character too many. If a correction is
+ found, the corrected filename is printed, and the com-
+ mand proceeds. This option is only used by interactive
shells.
c\bch\bhe\bec\bck\bkh\bha\bas\bsh\bh
If set, b\bba\bas\bsh\bh checks that a command found in the hash ta-
- ble exists before trying to execute it. If a hashed
- command no longer exists, a normal path search is per-
+ ble exists before trying to execute it. If a hashed
+ command no longer exists, a normal path search is per-
formed.
c\bch\bhe\bec\bck\bkj\bjo\bob\bbs\bs
If set, b\bba\bas\bsh\bh lists the status of any stopped and running
- jobs before exiting an interactive shell. If any jobs
+ jobs before exiting an interactive shell. If any jobs
are running, this causes the exit to be deferred until a
- second exit is attempted without an intervening command
+ second exit is attempted without an intervening command
(see J\bJO\bOB\bB C\bCO\bON\bNT\bTR\bRO\bOL\bL above). The shell always postpones ex-
iting if any jobs are stopped.
c\bch\bhe\bec\bck\bkw\bwi\bin\bns\bsi\biz\bze\be
- If set, b\bba\bas\bsh\bh checks the window size after each external
- (non-builtin) command and, if necessary, updates the
- values of L\bLI\bIN\bNE\bES\bS and C\bCO\bOL\bLU\bUM\bMN\bNS\bS. This option is enabled by
+ If set, b\bba\bas\bsh\bh checks the window size after each external
+ (non-builtin) command and, if necessary, updates the
+ values of L\bLI\bIN\bNE\bES\bS and C\bCO\bOL\bLU\bUM\bMN\bNS\bS. This option is enabled by
default.
- c\bcm\bmd\bdh\bhi\bis\bst\bt If set, b\bba\bas\bsh\bh attempts to save all lines of a multiple-
- line command in the same history entry. This allows
- easy re-editing of multi-line commands. This option is
- enabled by default, but only has an effect if command
+ c\bcm\bmd\bdh\bhi\bis\bst\bt If set, b\bba\bas\bsh\bh attempts to save all lines of a multiple-
+ line command in the same history entry. This allows
+ easy re-editing of multi-line commands. This option is
+ enabled by default, but only has an effect if command
history is enabled, as described above under H\bHI\bIS\bST\bTO\bOR\bRY\bY.
c\bco\bom\bmp\bpa\bat\bt3\b31\b1
c\bco\bom\bmp\bpa\bat\bt3\b32\b2
c\bco\bom\bmp\bpa\bat\bt4\b43\b3
c\bco\bom\bmp\bpa\bat\bt4\b44\b4
c\bco\bom\bmp\bpa\bat\bt5\b50\b0
- These control aspects of the shell's compatibility mode
+ These control aspects of the shell's compatibility mode
(see S\bSH\bHE\bEL\bLL\bL C\bCO\bOM\bMP\bPA\bAT\bTI\bIB\bBI\bIL\bLI\bIT\bTY\bY M\bMO\bOD\bDE\bE below).
c\bco\bom\bmp\bpl\ble\bet\bte\be_\b_f\bfu\bul\bll\blq\bqu\buo\bot\bte\be
- If set, b\bba\bas\bsh\bh quotes all shell metacharacters in file-
- names and directory names when performing completion.
+ If set, b\bba\bas\bsh\bh quotes all shell metacharacters in file-
+ names and directory names when performing completion.
If not set, b\bba\bas\bsh\bh removes metacharacters such as the dol-
- lar sign from the set of characters that will be quoted
- in completed filenames when these metacharacters appear
- in shell variable references in words to be completed.
- This means that dollar signs in variable names that ex-
- pand to directories will not be quoted; however, any
- dollar signs appearing in filenames will not be quoted,
- either. This is active only when bash is using back-
- slashes to quote completed filenames. This variable is
- set by default, which is the default bash behavior in
+ lar sign from the set of characters that will be quoted
+ in completed filenames when these metacharacters appear
+ in shell variable references in words to be completed.
+ This means that dollar signs in variable names that ex-
+ pand to directories will not be quoted; however, any
+ dollar signs appearing in filenames will not be quoted,
+ either. This is active only when bash is using back-
+ slashes to quote completed filenames. This variable is
+ set by default, which is the default bash behavior in
versions through 4.2.
d\bdi\bir\bre\bex\bxp\bpa\ban\bnd\bd
- If set, b\bba\bas\bsh\bh replaces directory names with the results
- of word expansion when performing filename completion.
- This changes the contents of the readline editing buf-
- fer. If not set, b\bba\bas\bsh\bh attempts to preserve what the
+ If set, b\bba\bas\bsh\bh replaces directory names with the results
+ of word expansion when performing filename completion.
+ This changes the contents of the readline editing buf-
+ fer. If not set, b\bba\bas\bsh\bh attempts to preserve what the
user typed.
d\bdi\bir\brs\bsp\bpe\bel\bll\bl
- If set, b\bba\bas\bsh\bh attempts spelling correction on directory
- names during word completion if the directory name ini-
+ If set, b\bba\bas\bsh\bh attempts spelling correction on directory
+ names during word completion if the directory name ini-
tially supplied does not exist.
- d\bdo\bot\btg\bgl\blo\bob\bb If set, b\bba\bas\bsh\bh includes filenames beginning with a `.' in
- the results of pathname expansion. The filenames `\b``\b`.\b.'\b''\b'
- and `\b``\b`.\b..\b.'\b''\b' must always be matched explicitly, even if
+ d\bdo\bot\btg\bgl\blo\bob\bb If set, b\bba\bas\bsh\bh includes filenames beginning with a `.' in
+ the results of pathname expansion. The filenames `\b``\b`.\b.'\b''\b'
+ and `\b``\b`.\b..\b.'\b''\b' must always be matched explicitly, even if
d\bdo\bot\btg\bgl\blo\bob\bb is set.
e\bex\bxe\bec\bcf\bfa\bai\bil\bl
If set, a non-interactive shell will not exit if it can-
- not execute the file specified as an argument to the
- e\bex\bxe\bec\bc builtin command. An interactive shell does not
+ not execute the file specified as an argument to the
+ e\bex\bxe\bec\bc builtin command. An interactive shell does not
exit if e\bex\bxe\bec\bc fails.
e\bex\bxp\bpa\ban\bnd\bd_\b_a\bal\bli\bia\bas\bse\bes\bs
- If set, aliases are expanded as described above under
+ If set, aliases are expanded as described above under
A\bAL\bLI\bIA\bAS\bSE\bES\bS. This option is enabled by default for interac-
tive shells.
e\bex\bxt\btd\bde\beb\bbu\bug\bg
- If set at shell invocation, or in a shell startup file,
+ If set at shell invocation, or in a shell startup file,
arrange to execute the debugger profile before the shell
- starts, identical to the -\b--\b-d\bde\beb\bbu\bug\bgg\bge\ber\br option. If set af-
- ter invocation, behavior intended for use by debuggers
+ starts, identical to the -\b--\b-d\bde\beb\bbu\bug\bgg\bge\ber\br option. If set af-
+ ter invocation, behavior intended for use by debuggers
is enabled:
1\b1.\b. The -\b-F\bF option to the d\bde\bec\bcl\bla\bar\bre\be builtin displays the
source file name and line number corresponding to
each function name supplied as an argument.
- 2\b2.\b. If the command run by the D\bDE\bEB\bBU\bUG\bG trap returns a
- non-zero value, the next command is skipped and
+ 2\b2.\b. If the command run by the D\bDE\bEB\bBU\bUG\bG trap returns a
+ non-zero value, the next command is skipped and
not executed.
- 3\b3.\b. If the command run by the D\bDE\bEB\bBU\bUG\bG trap returns a
- value of 2, and the shell is executing in a sub-
- routine (a shell function or a shell script exe-
- cuted by the .\b. or s\bso\bou\bur\brc\bce\be builtins), the shell
+ 3\b3.\b. If the command run by the D\bDE\bEB\bBU\bUG\bG trap returns a
+ value of 2, and the shell is executing in a sub-
+ routine (a shell function or a shell script exe-
+ cuted by the .\b. or s\bso\bou\bur\brc\bce\be builtins), the shell
simulates a call to r\bre\bet\btu\bur\brn\bn.
- 4\b4.\b. B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGC\bC and B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGV\bV are updated as described
+ 4\b4.\b. B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGC\bC and B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGV\bV are updated as described
in their descriptions above).
- 5\b5.\b. Function tracing is enabled: command substitu-
+ 5\b5.\b. Function tracing is enabled: command substitu-
tion, shell functions, and subshells invoked with
(\b( _\bc_\bo_\bm_\bm_\ba_\bn_\bd )\b) inherit the D\bDE\bEB\bBU\bUG\bG and R\bRE\bET\bTU\bUR\bRN\bN traps.
- 6\b6.\b. Error tracing is enabled: command substitution,
- shell functions, and subshells invoked with (\b(
+ 6\b6.\b. Error tracing is enabled: command substitution,
+ shell functions, and subshells invoked with (\b(
_\bc_\bo_\bm_\bm_\ba_\bn_\bd )\b) inherit the E\bER\bRR\bR trap.
e\bex\bxt\btg\bgl\blo\bob\bb If set, the extended pattern matching features described
above under P\bPa\bat\bth\bhn\bna\bam\bme\be E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn are enabled.
e\bex\bxt\btq\bqu\buo\bot\bte\be
- If set, $\b$'_\bs_\bt_\br_\bi_\bn_\bg' and $\b$"_\bs_\bt_\br_\bi_\bn_\bg" quoting is performed
- within $\b${\b{_\bp_\ba_\br_\ba_\bm_\be_\bt_\be_\br}\b} expansions enclosed in double
+ If set, $\b$'_\bs_\bt_\br_\bi_\bn_\bg' and $\b$"_\bs_\bt_\br_\bi_\bn_\bg" quoting is performed
+ within $\b${\b{_\bp_\ba_\br_\ba_\bm_\be_\bt_\be_\br}\b} expansions enclosed in double
quotes. This option is enabled by default.
f\bfa\bai\bil\blg\bgl\blo\bob\bb
- If set, patterns which fail to match filenames during
+ If set, patterns which fail to match filenames during
pathname expansion result in an expansion error.
f\bfo\bor\brc\bce\be_\b_f\bfi\big\bgn\bno\bor\bre\be
- If set, the suffixes specified by the F\bFI\bIG\bGN\bNO\bOR\bRE\bE shell
- variable cause words to be ignored when performing word
+ If set, the suffixes specified by the F\bFI\bIG\bGN\bNO\bOR\bRE\bE shell
+ variable cause words to be ignored when performing word
completion even if the ignored words are the only possi-
- ble completions. See S\bSH\bHE\bEL\bLL\bL V\bVA\bAR\bRI\bIA\bAB\bBL\bLE\bES\bS above for a de-
- scription of F\bFI\bIG\bGN\bNO\bOR\bRE\bE. This option is enabled by de-
+ ble completions. See S\bSH\bHE\bEL\bLL\bL V\bVA\bAR\bRI\bIA\bAB\bBL\bLE\bES\bS above for a de-
+ scription of F\bFI\bIG\bGN\bNO\bOR\bRE\bE. This option is enabled by de-
fault.
g\bgl\blo\bob\bba\bas\bsc\bci\bii\bir\bra\ban\bng\bge\bes\bs
- If set, range expressions used in pattern matching
- bracket expressions (see P\bPa\bat\btt\bte\ber\brn\bn M\bMa\bat\btc\bch\bhi\bin\bng\bg above) behave
- as if in the traditional C locale when performing com-
- parisons. That is, the current locale's collating se-
- quence is not taken into account, so b\bb will not collate
- between A\bA and B\bB, and upper-case and lower-case ASCII
+ If set, range expressions used in pattern matching
+ bracket expressions (see P\bPa\bat\btt\bte\ber\brn\bn M\bMa\bat\btc\bch\bhi\bin\bng\bg above) behave
+ as if in the traditional C locale when performing com-
+ parisons. That is, the current locale's collating se-
+ quence is not taken into account, so b\bb will not collate
+ between A\bA and B\bB, and upper-case and lower-case ASCII
characters will collate together.
g\bgl\blo\bob\bbs\bsk\bki\bip\bpd\bdo\bot\bts\bs
- If set, pathname expansion will never match the file-
+ If set, pathname expansion will never match the file-
names `\b``\b`.\b.'\b''\b' and `\b``\b`.\b..\b.'\b''\b', even if the pattern begins with
a `\b``\b`.\b.'\b''\b'. This option is enabled by default.
g\bgl\blo\bob\bbs\bst\bta\bar\br
If set, the pattern *\b**\b* used in a pathname expansion con-
- text will match all files and zero or more directories
- and subdirectories. If the pattern is followed by a /\b/,
+ text will match all files and zero or more directories
+ and subdirectories. If the pattern is followed by a /\b/,
only directories and subdirectories match.
g\bgn\bnu\bu_\b_e\ber\brr\brf\bfm\bmt\bt
GNU error message format.
h\bhi\bis\bst\bta\bap\bpp\bpe\ben\bnd\bd
- If set, the history list is appended to the file named
+ If set, the history list is appended to the file named
by the value of the H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE variable when the shell ex-
its, rather than overwriting the file.
h\bhi\bis\bst\btr\bre\bee\bed\bdi\bit\bt
- If set, and r\bre\bea\bad\bdl\bli\bin\bne\be is being used, a user is given the
+ If set, and r\bre\bea\bad\bdl\bli\bin\bne\be is being used, a user is given the
opportunity to re-edit a failed history substitution.
h\bhi\bis\bst\btv\bve\ber\bri\bif\bfy\by
- If set, and r\bre\bea\bad\bdl\bli\bin\bne\be is being used, the results of his-
- tory substitution are not immediately passed to the
- shell parser. Instead, the resulting line is loaded
+ If set, and r\bre\bea\bad\bdl\bli\bin\bne\be is being used, the results of his-
+ tory substitution are not immediately passed to the
+ shell parser. Instead, the resulting line is loaded
into the r\bre\bea\bad\bdl\bli\bin\bne\be editing buffer, allowing further modi-
fication.
h\bho\bos\bst\btc\bco\bom\bmp\bpl\ble\bet\bte\be
If set, and r\bre\bea\bad\bdl\bli\bin\bne\be is being used, b\bba\bas\bsh\bh will attempt to
- perform hostname completion when a word containing a @\b@
- is being completed (see C\bCo\bom\bmp\bpl\ble\bet\bti\bin\bng\bg under R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE
+ perform hostname completion when a word containing a @\b@
+ is being completed (see C\bCo\bom\bmp\bpl\ble\bet\bti\bin\bng\bg under R\bRE\bEA\bAD\bDL\bLI\bIN\bNE\bE
above). This is enabled by default.
h\bhu\bup\bpo\bon\bne\bex\bxi\bit\bt
active login shell exits.
i\bin\bnh\bhe\ber\bri\bit\bt_\b_e\ber\brr\bre\bex\bxi\bit\bt
- If set, command substitution inherits the value of the
- e\ber\brr\bre\bex\bxi\bit\bt option, instead of unsetting it in the subshell
- environment. This option is enabled when _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be is
+ If set, command substitution inherits the value of the
+ e\ber\brr\bre\bex\bxi\bit\bt option, instead of unsetting it in the subshell
+ environment. This option is enabled when _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be is
enabled.
i\bin\bnt\bte\ber\bra\bac\bct\bti\biv\bve\be_\b_c\bco\bom\bmm\bme\ben\bnt\bts\bs
If set, allow a word beginning with #\b# to cause that word
- and all remaining characters on that line to be ignored
- in an interactive shell (see C\bCO\bOM\bMM\bME\bEN\bNT\bTS\bS above). This op-
+ and all remaining characters on that line to be ignored
+ in an interactive shell (see C\bCO\bOM\bMM\bME\bEN\bNT\bTS\bS above). This op-
tion is enabled by default.
l\bla\bas\bst\btp\bpi\bip\bpe\be
- If set, and job control is not active, the shell runs
+ If set, and job control is not active, the shell runs
the last command of a pipeline not executed in the back-
ground in the current shell environment.
- l\bli\bit\bth\bhi\bis\bst\bt If set, and the c\bcm\bmd\bdh\bhi\bis\bst\bt option is enabled, multi-line
+ l\bli\bit\bth\bhi\bis\bst\bt If set, and the c\bcm\bmd\bdh\bhi\bis\bst\bt option is enabled, multi-line
commands are saved to the history with embedded newlines
rather than using semicolon separators where possible.
tribute is not inherited.
l\blo\boc\bca\bal\blv\bva\bar\br_\b_u\bun\bns\bse\bet\bt
- If set, calling u\bun\bns\bse\bet\bt on local variables in previous
- function scopes marks them so subsequent lookups find
- them unset until that function returns. This is identi-
- cal to the behavior of unsetting local variables at the
+ If set, calling u\bun\bns\bse\bet\bt on local variables in previous
+ function scopes marks them so subsequent lookups find
+ them unset until that function returns. This is identi-
+ cal to the behavior of unsetting local variables at the
current function scope.
l\blo\bog\bgi\bin\bn_\b_s\bsh\bhe\bel\bll\bl
- The shell sets this option if it is started as a login
- shell (see I\bIN\bNV\bVO\bOC\bCA\bAT\bTI\bIO\bON\bN above). The value may not be
+ The shell sets this option if it is started as a login
+ shell (see I\bIN\bNV\bVO\bOC\bCA\bAT\bTI\bIO\bON\bN above). The value may not be
changed.
m\bma\bai\bil\blw\bwa\bar\brn\bn
- If set, and a file that b\bba\bas\bsh\bh is checking for mail has
- been accessed since the last time it was checked, the
- message ``The mail in _\bm_\ba_\bi_\bl_\bf_\bi_\bl_\be has been read'' is dis-
+ If set, and a file that b\bba\bas\bsh\bh is checking for mail has
+ been accessed since the last time it was checked, the
+ message ``The mail in _\bm_\ba_\bi_\bl_\bf_\bi_\bl_\be has been read'' is dis-
played.
n\bno\bo_\b_e\bem\bmp\bpt\bty\by_\b_c\bcm\bmd\bd_\b_c\bco\bom\bmp\bpl\ble\bet\bti\bio\bon\bn
- If set, and r\bre\bea\bad\bdl\bli\bin\bne\be is being used, b\bba\bas\bsh\bh will not at-
- tempt to search the P\bPA\bAT\bTH\bH for possible completions when
+ If set, and r\bre\bea\bad\bdl\bli\bin\bne\be is being used, b\bba\bas\bsh\bh will not at-
+ tempt to search the P\bPA\bAT\bTH\bH for possible completions when
completion is attempted on an empty line.
n\bno\boc\bca\bas\bse\beg\bgl\blo\bob\bb
- If set, b\bba\bas\bsh\bh matches filenames in a case-insensitive
+ If set, b\bba\bas\bsh\bh matches filenames in a case-insensitive
fashion when performing pathname expansion (see P\bPa\bat\bth\bhn\bna\bam\bme\be
E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn above).
n\bno\boc\bca\bas\bse\bem\bma\bat\btc\bch\bh
- If set, b\bba\bas\bsh\bh matches patterns in a case-insensitive
+ If set, b\bba\bas\bsh\bh matches patterns in a case-insensitive
fashion when performing matching while executing c\bca\bas\bse\be or
[\b[[\b[ conditional commands, when performing pattern substi-
- tution word expansions, or when filtering possible com-
+ tution word expansions, or when filtering possible com-
pletions as part of programmable completion.
n\bno\boe\bex\bxp\bpa\ban\bnd\bd_\b_t\btr\bra\ban\bns\bsl\bla\bat\bti\bio\bon\bn
- If set, b\bba\bas\bsh\bh encloses the translated results of $"..."
- quoting in single quotes instead of double quotes. If
+ If set, b\bba\bas\bsh\bh encloses the translated results of $"..."
+ quoting in single quotes instead of double quotes. If
the string is not translated, this has no effect.
n\bnu\bul\bll\blg\bgl\blo\bob\bb
- If set, b\bba\bas\bsh\bh allows patterns which match no files (see
- P\bPa\bat\bth\bhn\bna\bam\bme\be E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn above) to expand to a null string,
+ If set, b\bba\bas\bsh\bh allows patterns which match no files (see
+ P\bPa\bat\bth\bhn\bna\bam\bme\be E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn above) to expand to a null string,
rather than themselves.
p\bpa\bat\bts\bsu\bub\bb_\b_r\bre\bep\bpl\bla\bac\bce\bem\bme\ben\bnt\bt
If set, b\bba\bas\bsh\bh expands occurrences of &\b& in the replacement
- string of pattern substitution to the text matched by
- the pattern, as described under P\bPa\bar\bra\bam\bme\bet\bte\ber\br E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn
+ string of pattern substitution to the text matched by
+ the pattern, as described under P\bPa\bar\bra\bam\bme\bet\bte\ber\br E\bEx\bxp\bpa\ban\bns\bsi\bio\bon\bn
above. This option is enabled by default.
p\bpr\bro\bog\bgc\bco\bom\bmp\bp
enabled by default.
p\bpr\bro\bog\bgc\bco\bom\bmp\bp_\b_a\bal\bli\bia\bas\bs
- If set, and programmable completion is enabled, b\bba\bas\bsh\bh
- treats a command name that doesn't have any completions
- as a possible alias and attempts alias expansion. If it
- has an alias, b\bba\bas\bsh\bh attempts programmable completion us-
+ If set, and programmable completion is enabled, b\bba\bas\bsh\bh
+ treats a command name that doesn't have any completions
+ as a possible alias and attempts alias expansion. If it
+ has an alias, b\bba\bas\bsh\bh attempts programmable completion us-
ing the command word resulting from the expanded alias.
p\bpr\bro\bom\bmp\bpt\btv\bva\bar\brs\bs
If set, prompt strings undergo parameter expansion, com-
- mand substitution, arithmetic expansion, and quote re-
- moval after being expanded as described in P\bPR\bRO\bOM\bMP\bPT\bTI\bIN\bNG\bG
+ mand substitution, arithmetic expansion, and quote re-
+ moval after being expanded as described in P\bPR\bRO\bOM\bMP\bPT\bTI\bIN\bNG\bG
above. This option is enabled by default.
r\bre\bes\bst\btr\bri\bic\bct\bte\bed\bd_\b_s\bsh\bhe\bel\bll\bl
- The shell sets this option if it is started in re-
- stricted mode (see R\bRE\bES\bST\bTR\bRI\bIC\bCT\bTE\bED\bD S\bSH\bHE\bEL\bLL\bL below). The value
- may not be changed. This is not reset when the startup
- files are executed, allowing the startup files to dis-
+ The shell sets this option if it is started in re-
+ stricted mode (see R\bRE\bES\bST\bTR\bRI\bIC\bCT\bTE\bED\bD S\bSH\bHE\bEL\bLL\bL below). The value
+ may not be changed. This is not reset when the startup
+ files are executed, allowing the startup files to dis-
cover whether or not a shell is restricted.
s\bsh\bhi\bif\bft\bt_\b_v\bve\ber\brb\bbo\bos\bse\be
- If set, the s\bsh\bhi\bif\bft\bt builtin prints an error message when
+ If set, the s\bsh\bhi\bif\bft\bt builtin prints an error message when
the shift count exceeds the number of positional parame-
ters.
s\bso\bou\bur\brc\bce\bep\bpa\bat\bth\bh
If set, the .\b. (s\bso\bou\bur\brc\bce\be) builtin uses the value of P\bPA\bAT\bTH\bH to
- find the directory containing the file supplied as an
+ find the directory containing the file supplied as an
argument. This option is enabled by default.
v\bva\bar\brr\bre\bed\bdi\bir\br_\b_c\bcl\blo\bos\bse\be
- If set, the shell automatically closes file descriptors
+ If set, the shell automatically closes file descriptors
assigned using the _\b{_\bv_\ba_\br_\bn_\ba_\bm_\be_\b} redirection syntax (see R\bRE\bE-\b-
- D\bDI\bIR\bRE\bEC\bCT\bTI\bIO\bON\bN above) instead of leaving them open when the
+ D\bDI\bIR\bRE\bEC\bCT\bTI\bIO\bON\bN above) instead of leaving them open when the
command completes.
x\bxp\bpg\bg_\b_e\bec\bch\bho\bo
- If set, the e\bec\bch\bho\bo builtin expands backslash-escape se-
+ If set, the e\bec\bch\bho\bo builtin expands backslash-escape se-
quences by default.
s\bsu\bus\bsp\bpe\ben\bnd\bd [-\b-f\bf]
- Suspend the execution of this shell until it receives a S\bSI\bIG\bGC\bCO\bON\bNT\bT
- signal. A login shell, or a shell without job control enabled,
- cannot be suspended; the -\b-f\bf option can be used to override this
- and force the suspension. The return status is 0 unless the
- shell is a login shell or job control is not enabled and -\b-f\bf is
+ Suspend the execution of this shell until it receives a S\bSI\bIG\bGC\bCO\bON\bNT\bT
+ signal. A login shell, or a shell without job control enabled,
+ cannot be suspended; the -\b-f\bf option can be used to override this
+ and force the suspension. The return status is 0 unless the
+ shell is a login shell or job control is not enabled and -\b-f\bf is
not supplied.
t\bte\bes\bst\bt _\be_\bx_\bp_\br
[\b[ _\be_\bx_\bp_\br ]\b]
Return a status of 0 (true) or 1 (false) depending on the evalu-
ation of the conditional expression _\be_\bx_\bp_\br. Each operator and op-
- erand must be a separate argument. Expressions are composed of
- the primaries described above under C\bCO\bON\bND\bDI\bIT\bTI\bIO\bON\bNA\bAL\bL E\bEX\bXP\bPR\bRE\bES\bSS\bSI\bIO\bON\bNS\bS.
- t\bte\bes\bst\bt does not accept any options, nor does it accept and ignore
+ erand must be a separate argument. Expressions are composed of
+ the primaries described above under C\bCO\bON\bND\bDI\bIT\bTI\bIO\bON\bNA\bAL\bL E\bEX\bXP\bPR\bRE\bES\bSS\bSI\bIO\bON\bNS\bS.
+ t\bte\bes\bst\bt does not accept any options, nor does it accept and ignore
an argument of -\b--\b- as signifying the end of options.
- Expressions may be combined using the following operators,
- listed in decreasing order of precedence. The evaluation de-
- pends on the number of arguments; see below. Operator prece-
+ Expressions may be combined using the following operators,
+ listed in decreasing order of precedence. The evaluation de-
+ pends on the number of arguments; see below. Operator prece-
dence is used when there are five or more arguments.
!\b! _\be_\bx_\bp_\br True if _\be_\bx_\bp_\br is false.
(\b( _\be_\bx_\bp_\br )\b)
- Returns the value of _\be_\bx_\bp_\br. This may be used to override
+ Returns the value of _\be_\bx_\bp_\br. This may be used to override
the normal precedence of operators.
_\be_\bx_\bp_\br_\b1 -a\ba _\be_\bx_\bp_\br_\b2
True if both _\be_\bx_\bp_\br_\b1 and _\be_\bx_\bp_\br_\b2 are true.
null.
2 arguments
If the first argument is !\b!, the expression is true if and
- only if the second argument is null. If the first argu-
- ment is one of the unary conditional operators listed
- above under C\bCO\bON\bND\bDI\bIT\bTI\bIO\bON\bNA\bAL\bL E\bEX\bXP\bPR\bRE\bES\bSS\bSI\bIO\bON\bNS\bS, the expression is
+ only if the second argument is null. If the first argu-
+ ment is one of the unary conditional operators listed
+ above under C\bCO\bON\bND\bDI\bIT\bTI\bIO\bON\bNA\bAL\bL E\bEX\bXP\bPR\bRE\bES\bSS\bSI\bIO\bON\bNS\bS, the expression is
true if the unary test is true. If the first argument is
not a valid unary conditional operator, the expression is
false.
3 arguments
The following conditions are applied in the order listed.
- If the second argument is one of the binary conditional
+ If the second argument is one of the binary conditional
operators listed above under C\bCO\bON\bND\bDI\bIT\bTI\bIO\bON\bNA\bAL\bL E\bEX\bXP\bPR\bRE\bES\bSS\bSI\bIO\bON\bNS\bS, the
result of the expression is the result of the binary test
- using the first and third arguments as operands. The -\b-a\ba
- and -\b-o\bo operators are considered binary operators when
- there are three arguments. If the first argument is !\b!,
- the value is the negation of the two-argument test using
+ using the first and third arguments as operands. The -\b-a\ba
+ and -\b-o\bo operators are considered binary operators when
+ there are three arguments. If the first argument is !\b!,
+ the value is the negation of the two-argument test using
the second and third arguments. If the first argument is
exactly (\b( and the third argument is exactly )\b), the result
- is the one-argument test of the second argument. Other-
+ is the one-argument test of the second argument. Other-
wise, the expression is false.
4 arguments
The following conditions are applied in the order listed.
If the first argument is !\b!, the result is the negation of
- the three-argument expression composed of the remaining
- arguments. the two-argument test using the second and
- third arguments. If the first argument is exactly (\b( and
- the fourth argument is exactly )\b), the result is the two-
- argument test of the second and third arguments. Other-
+ the three-argument expression composed of the remaining
+ arguments. the two-argument test using the second and
+ third arguments. If the first argument is exactly (\b( and
+ the fourth argument is exactly )\b), the result is the two-
+ argument test of the second and third arguments. Other-
wise, the expression is parsed and evaluated according to
precedence using the rules listed above.
5 or more arguments
- The expression is parsed and evaluated according to
+ The expression is parsed and evaluated according to
precedence using the rules listed above.
If the shell is not in _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be, when used with t\bte\bes\bst\bt or [\b[, the
- <\b< and >\b> operators sort lexicographically using ASCII ordering.
- When the shell is in _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be, these operators sort using the
+ <\b< and >\b> operators sort lexicographically using ASCII ordering.
+ When the shell is in _\bp_\bo_\bs_\bi_\bx _\bm_\bo_\bd_\be, these operators sort using the
current locale.
- t\bti\bim\bme\bes\bs Print the accumulated user and system times for the shell and
+ t\bti\bim\bme\bes\bs Print the accumulated user and system times for the shell and
for processes run from the shell. The return status is 0.
t\btr\bra\bap\bp [-\b-l\blp\bp] [[_\ba_\bc_\bt_\bi_\bo_\bn] _\bs_\bi_\bg_\bs_\bp_\be_\bc ...]
The _\ba_\bc_\bt_\bi_\bo_\bn is a command that is read and executed when the shell
receives signal(s) _\bs_\bi_\bg_\bs_\bp_\be_\bc. If _\ba_\bc_\bt_\bi_\bo_\bn is absent (and there is a
- single _\bs_\bi_\bg_\bs_\bp_\be_\bc) or -\b-, each specified signal is reset to its
- original disposition (the value it had upon entrance to the
- shell). If _\ba_\bc_\bt_\bi_\bo_\bn is the null string the signal specified by
- each _\bs_\bi_\bg_\bs_\bp_\be_\bc is ignored by the shell and by the commands it in-
+ single _\bs_\bi_\bg_\bs_\bp_\be_\bc) or -\b-, each specified signal is reset to its
+ original disposition (the value it had upon entrance to the
+ shell). If _\ba_\bc_\bt_\bi_\bo_\bn is the null string the signal specified by
+ each _\bs_\bi_\bg_\bs_\bp_\be_\bc is ignored by the shell and by the commands it in-
vokes.
- If no arguments are supplied, t\btr\bra\bap\bp displays the actions associ-
+ If no arguments are supplied, t\btr\bra\bap\bp displays the actions associ-
ated with each trapped signal as a set of t\btr\bra\bap\bp commands that can
- be reused as shell input to restore the current signal disposi-
- tions. If -\b-p\bp is given, and _\ba_\bc_\bt_\bi_\bo_\bn is not present, then t\btr\bra\bap\bp
- displays the actions associated with each _\bs_\bi_\bg_\bs_\bp_\be_\bc or, if none
+ be reused as shell input to restore the current signal disposi-
+ tions. If -\b-p\bp is given, and _\ba_\bc_\bt_\bi_\bo_\bn is not present, then t\btr\bra\bap\bp
+ displays the actions associated with each _\bs_\bi_\bg_\bs_\bp_\be_\bc or, if none
are supplied, for all trapped signals, as a set of t\btr\bra\bap\bp commands
- that can be reused as shell input to restore the current signal
- dispositions. The -\b-P\bP option behaves similarly, but displays
- only the actions associated with each _\bs_\bi_\bg_\bs_\bp_\be_\bc argument. -\b-P\bP re-
- quires at least one _\bs_\bi_\bg_\bs_\bp_\be_\bc argument. The -\b-P\bP or -\b-p\bp options to
- t\btr\bra\bap\bp may be used in a subshell environment (e.g., command sub-
- stitution) and, as long as they are used before t\btr\bra\bap\bp is used to
- change a signal's handling, will display the state of its par-
+ that can be reused as shell input to restore the current signal
+ dispositions. The -\b-P\bP option behaves similarly, but displays
+ only the actions associated with each _\bs_\bi_\bg_\bs_\bp_\be_\bc argument. -\b-P\bP re-
+ quires at least one _\bs_\bi_\bg_\bs_\bp_\be_\bc argument. The -\b-P\bP or -\b-p\bp options to
+ t\btr\bra\bap\bp may be used in a subshell environment (e.g., command sub-
+ stitution) and, as long as they are used before t\btr\bra\bap\bp is used to
+ change a signal's handling, will display the state of its par-
ent's traps.
- The -\b-l\bl option causes t\btr\bra\bap\bp to print a list of signal names and
- their corresponding numbers. Each _\bs_\bi_\bg_\bs_\bp_\be_\bc is either a signal
- name defined in <_\bs_\bi_\bg_\bn_\ba_\bl_\b._\bh>, or a signal number. Signal names
+ The -\b-l\bl option causes t\btr\bra\bap\bp to print a list of signal names and
+ their corresponding numbers. Each _\bs_\bi_\bg_\bs_\bp_\be_\bc is either a signal
+ name defined in <_\bs_\bi_\bg_\bn_\ba_\bl_\b._\bh>, or a signal number. Signal names
are case insensitive and the S\bSI\bIG\bG prefix is optional.
- If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is E\bEX\bXI\bIT\bT (0) the command _\ba_\bc_\bt_\bi_\bo_\bn is executed on exit
- from the shell. If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is D\bDE\bEB\bBU\bUG\bG, the command _\ba_\bc_\bt_\bi_\bo_\bn is
+ If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is E\bEX\bXI\bIT\bT (0) the command _\ba_\bc_\bt_\bi_\bo_\bn is executed on exit
+ from the shell. If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is D\bDE\bEB\bBU\bUG\bG, the command _\ba_\bc_\bt_\bi_\bo_\bn is
executed before every _\bs_\bi_\bm_\bp_\bl_\be _\bc_\bo_\bm_\bm_\ba_\bn_\bd, _\bf_\bo_\br command, _\bc_\ba_\bs_\be command,
- _\bs_\be_\bl_\be_\bc_\bt command, (( arithmetic command, [[ conditional command,
+ _\bs_\be_\bl_\be_\bc_\bt command, (( arithmetic command, [[ conditional command,
arithmetic _\bf_\bo_\br command, and before the first command executes in
- a shell function (see S\bSH\bHE\bEL\bLL\bL G\bGR\bRA\bAM\bMM\bMA\bAR\bR above). Refer to the de-
- scription of the e\bex\bxt\btd\bde\beb\bbu\bug\bg option to the s\bsh\bho\bop\bpt\bt builtin for de-
- tails of its effect on the D\bDE\bEB\bBU\bUG\bG trap. If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is R\bRE\bET\bTU\bUR\bRN\bN,
- the command _\ba_\bc_\bt_\bi_\bo_\bn is executed each time a shell function or a
- script executed with the .\b. or s\bso\bou\bur\brc\bce\be builtins finishes execut-
+ a shell function (see S\bSH\bHE\bEL\bLL\bL G\bGR\bRA\bAM\bMM\bMA\bAR\bR above). Refer to the de-
+ scription of the e\bex\bxt\btd\bde\beb\bbu\bug\bg option to the s\bsh\bho\bop\bpt\bt builtin for de-
+ tails of its effect on the D\bDE\bEB\bBU\bUG\bG trap. If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is R\bRE\bET\bTU\bUR\bRN\bN,
+ the command _\ba_\bc_\bt_\bi_\bo_\bn is executed each time a shell function or a
+ script executed with the .\b. or s\bso\bou\bur\brc\bce\be builtins finishes execut-
ing.
- If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is E\bER\bRR\bR, the command _\ba_\bc_\bt_\bi_\bo_\bn is executed whenever a
+ If a _\bs_\bi_\bg_\bs_\bp_\be_\bc is E\bER\bRR\bR, the command _\ba_\bc_\bt_\bi_\bo_\bn is executed whenever a
pipeline (which may consist of a single simple command), a list,
or a compound command returns a non-zero exit status, subject to
- the following conditions. The E\bER\bRR\bR trap is not executed if the
+ the following conditions. The E\bER\bRR\bR trap is not executed if the
failed command is part of the command list immediately following
- a w\bwh\bhi\bil\ble\be or u\bun\bnt\bti\bil\bl keyword, part of the test in an _\bi_\bf statement,
+ a w\bwh\bhi\bil\ble\be or u\bun\bnt\bti\bil\bl keyword, part of the test in an _\bi_\bf statement,
part of a command executed in a &\b&&\b& or |\b||\b| list except the command
- following the final &\b&&\b& or |\b||\b|, any command in a pipeline but the
- last, or if the command's return value is being inverted using
+ following the final &\b&&\b& or |\b||\b|, any command in a pipeline but the
+ last, or if the command's return value is being inverted using
!\b!. These are the same conditions obeyed by the e\ber\brr\bre\bex\bxi\bit\bt (-\b-e\be) op-
tion.
When the shell is not interactive, signals ignored upon entry to
the shell cannot be trapped or reset. Interactive shells permit
trapping signals ignored on entry. Trapped signals that are not
- being ignored are reset to their original values in a subshell
- or subshell environment when one is created. The return status
+ being ignored are reset to their original values in a subshell
+ or subshell environment when one is created. The return status
is false if any _\bs_\bi_\bg_\bs_\bp_\be_\bc is invalid; otherwise t\btr\bra\bap\bp returns true.
t\btr\bru\bue\be Does nothing, returns a 0 status.
t\bty\byp\bpe\be [-\b-a\baf\bft\btp\bpP\bP] _\bn_\ba_\bm_\be [_\bn_\ba_\bm_\be ...]
- With no options, indicate how each _\bn_\ba_\bm_\be would be interpreted if
+ With no options, indicate how each _\bn_\ba_\bm_\be would be interpreted if
used as a command name. If the -\b-t\bt option is used, t\bty\byp\bpe\be prints a
- string which is one of _\ba_\bl_\bi_\ba_\bs, _\bk_\be_\by_\bw_\bo_\br_\bd, _\bf_\bu_\bn_\bc_\bt_\bi_\bo_\bn, _\bb_\bu_\bi_\bl_\bt_\bi_\bn, or
- _\bf_\bi_\bl_\be if _\bn_\ba_\bm_\be is an alias, shell reserved word, function,
- builtin, or executable disk file, respectively. If the _\bn_\ba_\bm_\be is
- not found, then nothing is printed, and t\bty\byp\bpe\be returns a non-zero
- exit status. If the -\b-p\bp option is used, t\bty\byp\bpe\be either returns the
- name of the executable file that would be found by searching
- $\b$P\bPA\bAT\bTH\bH if _\bn_\ba_\bm_\be were specified as a command name, or nothing if
- ``type -t name'' would not return _\bf_\bi_\bl_\be. The -\b-P\bP option forces a
- P\bPA\bAT\bTH\bH search for each _\bn_\ba_\bm_\be, even if ``type -t name'' would not
+ string which is one of _\ba_\bl_\bi_\ba_\bs, _\bk_\be_\by_\bw_\bo_\br_\bd, _\bf_\bu_\bn_\bc_\bt_\bi_\bo_\bn, _\bb_\bu_\bi_\bl_\bt_\bi_\bn, or
+ _\bf_\bi_\bl_\be if _\bn_\ba_\bm_\be is an alias, shell reserved word, function,
+ builtin, or executable disk file, respectively. If the _\bn_\ba_\bm_\be is
+ not found, then nothing is printed, and t\bty\byp\bpe\be returns a non-zero
+ exit status. If the -\b-p\bp option is used, t\bty\byp\bpe\be either returns the
+ name of the executable file that would be found by searching
+ $\b$P\bPA\bAT\bTH\bH if _\bn_\ba_\bm_\be were specified as a command name, or nothing if
+ ``type -t name'' would not return _\bf_\bi_\bl_\be. The -\b-P\bP option forces a
+ P\bPA\bAT\bTH\bH search for each _\bn_\ba_\bm_\be, even if ``type -t name'' would not
return _\bf_\bi_\bl_\be. If a command is hashed, -\b-p\bp and -\b-P\bP print the hashed
- value, which is not necessarily the file that appears first in
- P\bPA\bAT\bTH\bH. If the -\b-a\ba option is used, t\bty\byp\bpe\be prints all of the places
- that contain a command named _\bn_\ba_\bm_\be. This includes aliases, re-
- served words, functions, and builtins, but the path search op-
+ value, which is not necessarily the file that appears first in
+ P\bPA\bAT\bTH\bH. If the -\b-a\ba option is used, t\bty\byp\bpe\be prints all of the places
+ that contain a command named _\bn_\ba_\bm_\be. This includes aliases, re-
+ served words, functions, and builtins, but the path search op-
tions (-\b-p\bp and -\b-P\bP) can be supplied to restrict the output to exe-
- cutable files. t\bty\byp\bpe\be does not consult the table of hashed com-
+ cutable files. t\bty\byp\bpe\be does not consult the table of hashed com-
mands when using -\b-a\ba with -\b-p\bp, and only performs a P\bPA\bAT\bTH\bH search for
- _\bn_\ba_\bm_\be. The -\b-f\bf option suppresses shell function lookup, as with
- the c\bco\bom\bmm\bma\ban\bnd\bd builtin. t\bty\byp\bpe\be returns true if all of the arguments
+ _\bn_\ba_\bm_\be. The -\b-f\bf option suppresses shell function lookup, as with
+ the c\bco\bom\bmm\bma\ban\bnd\bd builtin. t\bty\byp\bpe\be returns true if all of the arguments
are found, false if any are not found.
u\bul\bli\bim\bmi\bit\bt [-\b-H\bHS\bS] -\b-a\ba
u\bul\bli\bim\bmi\bit\bt [-\b-H\bHS\bS] [-\b-b\bbc\bcd\bde\bef\bfi\bik\bkl\blm\bmn\bnp\bpq\bqr\brs\bst\btu\buv\bvx\bxP\bPR\bRT\bT [_\bl_\bi_\bm_\bi_\bt]]
- Provides control over the resources available to the shell and
- to processes started by it, on systems that allow such control.
+ Provides control over the resources available to the shell and
+ to processes started by it, on systems that allow such control.
The -\b-H\bH and -\b-S\bS options specify that the hard or soft limit is set
- for the given resource. A hard limit cannot be increased by a
- non-root user once it is set; a soft limit may be increased up
- to the value of the hard limit. If neither -\b-H\bH nor -\b-S\bS is speci-
+ for the given resource. A hard limit cannot be increased by a
+ non-root user once it is set; a soft limit may be increased up
+ to the value of the hard limit. If neither -\b-H\bH nor -\b-S\bS is speci-
fied, both the soft and hard limits are set. The value of _\bl_\bi_\bm_\bi_\bt
can be a number in the unit specified for the resource or one of
the special values h\bha\bar\brd\bd, s\bso\bof\bft\bt, or u\bun\bnl\bli\bim\bmi\bit\bte\bed\bd, which stand for the
- current hard limit, the current soft limit, and no limit, re-
- spectively. If _\bl_\bi_\bm_\bi_\bt is omitted, the current value of the soft
+ current hard limit, the current soft limit, and no limit, re-
+ spectively. If _\bl_\bi_\bm_\bi_\bt is omitted, the current value of the soft
limit of the resource is printed, unless the -\b-H\bH option is given.
- When more than one resource is specified, the limit name and
- unit, if appropriate, are printed before the value. Other op-
+ When more than one resource is specified, the limit name and
+ unit, if appropriate, are printed before the value. Other op-
tions are interpreted as follows:
-\b-a\ba All current limits are reported; no limits are set
-\b-b\bb The maximum socket buffer size
-\b-c\bc The maximum size of core files created
-\b-d\bd The maximum size of a process's data segment
-\b-e\be The maximum scheduling priority ("nice")
- -\b-f\bf The maximum size of files written by the shell and its
+ -\b-f\bf The maximum size of files written by the shell and its
children
-\b-i\bi The maximum number of pending signals
-\b-k\bk The maximum number of kqueues that may be allocated
-\b-l\bl The maximum size that may be locked into memory
- -\b-m\bm The maximum resident set size (many systems do not honor
+ -\b-m\bm The maximum resident set size (many systems do not honor
this limit)
-\b-n\bn The maximum number of open file descriptors (most systems
do not allow this value to be set)
-\b-r\br The maximum real-time scheduling priority
-\b-s\bs The maximum stack size
-\b-t\bt The maximum amount of cpu time in seconds
- -\b-u\bu The maximum number of processes available to a single
+ -\b-u\bu The maximum number of processes available to a single
user
- -\b-v\bv The maximum amount of virtual memory available to the
+ -\b-v\bv The maximum amount of virtual memory available to the
shell and, on some systems, to its children
-\b-x\bx The maximum number of file locks
-\b-P\bP The maximum number of pseudoterminals
- -\b-R\bR The maximum time a real-time process can run before
+ -\b-R\bR The maximum time a real-time process can run before
blocking, in microseconds
-\b-T\bT The maximum number of threads
- If _\bl_\bi_\bm_\bi_\bt is given, and the -\b-a\ba option is not used, _\bl_\bi_\bm_\bi_\bt is the
- new value of the specified resource. If no option is given,
- then -\b-f\bf is assumed. Values are in 1024-byte increments, except
- for -\b-t\bt, which is in seconds; -\b-R\bR, which is in microseconds; -\b-p\bp,
- which is in units of 512-byte blocks; -\b-P\bP, -\b-T\bT, -\b-b\bb, -\b-k\bk, -\b-n\bn, and
- -\b-u\bu, which are unscaled values; and, when in posix mode, -\b-c\bc and
- -\b-f\bf, which are in 512-byte increments. The return status is 0
- unless an invalid option or argument is supplied, or an error
+ If _\bl_\bi_\bm_\bi_\bt is given, and the -\b-a\ba option is not used, _\bl_\bi_\bm_\bi_\bt is the
+ new value of the specified resource. If no option is given,
+ then -\b-f\bf is assumed. Values are in 1024-byte increments, except
+ for -\b-t\bt, which is in seconds; -\b-R\bR, which is in microseconds; -\b-p\bp,
+ which is in units of 512-byte blocks; -\b-P\bP, -\b-T\bT, -\b-b\bb, -\b-k\bk, -\b-n\bn, and
+ -\b-u\bu, which are unscaled values; and, when in posix mode, -\b-c\bc and
+ -\b-f\bf, which are in 512-byte increments. The return status is 0
+ unless an invalid option or argument is supplied, or an error
occurs while setting a new limit.
u\bum\bma\bas\bsk\bk [-\b-p\bp] [-\b-S\bS] [_\bm_\bo_\bd_\be]
The user file-creation mask is set to _\bm_\bo_\bd_\be. If _\bm_\bo_\bd_\be begins with
- a digit, it is interpreted as an octal number; otherwise it is
- interpreted as a symbolic mode mask similar to that accepted by
- _\bc_\bh_\bm_\bo_\bd(1). If _\bm_\bo_\bd_\be is omitted, the current value of the mask is
- printed. The -\b-S\bS option causes the mask to be printed in sym-
- bolic form; the default output is an octal number. If the -\b-p\bp
+ a digit, it is interpreted as an octal number; otherwise it is
+ interpreted as a symbolic mode mask similar to that accepted by
+ _\bc_\bh_\bm_\bo_\bd(1). If _\bm_\bo_\bd_\be is omitted, the current value of the mask is
+ printed. The -\b-S\bS option causes the mask to be printed in sym-
+ bolic form; the default output is an octal number. If the -\b-p\bp
option is supplied, and _\bm_\bo_\bd_\be is omitted, the output is in a form
that may be reused as input. The return status is 0 if the mode
- was successfully changed or if no _\bm_\bo_\bd_\be argument was supplied,
+ was successfully changed or if no _\bm_\bo_\bd_\be argument was supplied,
and false otherwise.
u\bun\bna\bal\bli\bia\bas\bs [-a\ba] [_\bn_\ba_\bm_\be ...]
- Remove each _\bn_\ba_\bm_\be from the list of defined aliases. If -\b-a\ba is
- supplied, all alias definitions are removed. The return value
+ Remove each _\bn_\ba_\bm_\be from the list of defined aliases. If -\b-a\ba is
+ supplied, all alias definitions are removed. The return value
is true unless a supplied _\bn_\ba_\bm_\be is not a defined alias.
u\bun\bns\bse\bet\bt [-f\bfv\bv] [-n\bn] [_\bn_\ba_\bm_\be ...]
- For each _\bn_\ba_\bm_\be, remove the corresponding variable or function.
+ For each _\bn_\ba_\bm_\be, remove the corresponding variable or function.
If the -\b-v\bv option is given, each _\bn_\ba_\bm_\be refers to a shell variable,
- and that variable is removed. Read-only variables may not be
- unset. If -\b-f\bf is specified, each _\bn_\ba_\bm_\be refers to a shell func-
- tion, and the function definition is removed. If the -\b-n\bn option
- is supplied, and _\bn_\ba_\bm_\be is a variable with the _\bn_\ba_\bm_\be_\br_\be_\bf attribute,
- _\bn_\ba_\bm_\be will be unset rather than the variable it references. -\b-n\bn
- has no effect if the -\b-f\bf option is supplied. If no options are
- supplied, each _\bn_\ba_\bm_\be refers to a variable; if there is no vari-
- able by that name, a function with that name, if any, is unset.
- Each unset variable or function is removed from the environment
- passed to subsequent commands. If any of B\bBA\bAS\bSH\bH_\b_A\bAL\bLI\bIA\bAS\bSE\bES\bS,
+ and that variable is removed. Read-only variables may not be
+ unset. If -\b-f\bf is specified, each _\bn_\ba_\bm_\be refers to a shell func-
+ tion, and the function definition is removed. If the -\b-n\bn option
+ is supplied, and _\bn_\ba_\bm_\be is a variable with the _\bn_\ba_\bm_\be_\br_\be_\bf attribute,
+ _\bn_\ba_\bm_\be will be unset rather than the variable it references. -\b-n\bn
+ has no effect if the -\b-f\bf option is supplied. If no options are
+ supplied, each _\bn_\ba_\bm_\be refers to a variable; if there is no vari-
+ able by that name, a function with that name, if any, is unset.
+ Each unset variable or function is removed from the environment
+ passed to subsequent commands. If any of B\bBA\bAS\bSH\bH_\b_A\bAL\bLI\bIA\bAS\bSE\bES\bS,
B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGV\bV0\b0, B\bBA\bAS\bSH\bH_\b_C\bCM\bMD\bDS\bS, B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bMM\bMA\bAN\bND\bD, B\bBA\bAS\bSH\bH_\b_S\bSU\bUB\bBS\bSH\bHE\bEL\bLL\bL, B\bBA\bAS\bSH\bHP\bPI\bID\bD,
- C\bCO\bOM\bMP\bP_\b_W\bWO\bOR\bRD\bDB\bBR\bRE\bEA\bAK\bKS\bS, D\bDI\bIR\bRS\bST\bTA\bAC\bCK\bK, E\bEP\bPO\bOC\bCH\bHR\bRE\bEA\bAL\bLT\bTI\bIM\bME\bE, E\bEP\bPO\bOC\bCH\bHS\bSE\bEC\bCO\bON\bND\bDS\bS, F\bFU\bUN\bNC\bC-\b-
- N\bNA\bAM\bME\bE, G\bGR\bRO\bOU\bUP\bPS\bS, H\bHI\bIS\bST\bTC\bCM\bMD\bD, L\bLI\bIN\bNE\bEN\bNO\bO, R\bRA\bAN\bND\bDO\bOM\bM, S\bSE\bEC\bCO\bON\bND\bDS\bS, or S\bSR\bRA\bAN\bND\bDO\bOM\bM are
+ C\bCO\bOM\bMP\bP_\b_W\bWO\bOR\bRD\bDB\bBR\bRE\bEA\bAK\bKS\bS, D\bDI\bIR\bRS\bST\bTA\bAC\bCK\bK, E\bEP\bPO\bOC\bCH\bHR\bRE\bEA\bAL\bLT\bTI\bIM\bME\bE, E\bEP\bPO\bOC\bCH\bHS\bSE\bEC\bCO\bON\bND\bDS\bS, F\bFU\bUN\bNC\bC-\b-
+ N\bNA\bAM\bME\bE, G\bGR\bRO\bOU\bUP\bPS\bS, H\bHI\bIS\bST\bTC\bCM\bMD\bD, L\bLI\bIN\bNE\bEN\bNO\bO, R\bRA\bAN\bND\bDO\bOM\bM, S\bSE\bEC\bCO\bON\bND\bDS\bS, or S\bSR\bRA\bAN\bND\bDO\bOM\bM are
unset, they lose their special properties, even if they are sub-
sequently reset. The exit status is true unless a _\bn_\ba_\bm_\be is read-
only or may not be unset.
w\bwa\bai\bit\bt [-\b-f\bfn\bn] [-\b-p\bp _\bv_\ba_\br_\bn_\ba_\bm_\be] [_\bi_\bd _\b._\b._\b.]
Wait for each specified child process and return its termination
- status. Each _\bi_\bd may be a process ID or a job specification; if
- a job spec is given, all processes in that job's pipeline are
- waited for. If _\bi_\bd is not given, w\bwa\bai\bit\bt waits for all running
- background jobs and the last-executed process substitution, if
+ status. Each _\bi_\bd may be a process ID or a job specification; if
+ a job spec is given, all processes in that job's pipeline are
+ waited for. If _\bi_\bd is not given, w\bwa\bai\bit\bt waits for all running
+ background jobs and the last-executed process substitution, if
its process id is the same as $\b$!\b!, and the return status is zero.
- If the -\b-n\bn option is supplied, w\bwa\bai\bit\bt waits for a single job from
+ If the -\b-n\bn option is supplied, w\bwa\bai\bit\bt waits for a single job from
the list of _\bi_\bds or, if no _\bi_\bds are supplied, any job, to complete
- and returns its exit status. If none of the supplied arguments
+ and returns its exit status. If none of the supplied arguments
is a child of the shell, or if no arguments are supplied and the
- shell has no unwaited-for children, the exit status is 127. If
- the -\b-p\bp option is supplied, the process or job identifier of the
- job for which the exit status is returned is assigned to the
- variable _\bv_\ba_\br_\bn_\ba_\bm_\be named by the option argument. The variable
- will be unset initially, before any assignment. This is useful
- only when the -\b-n\bn option is supplied. Supplying the -\b-f\bf option,
- when job control is enabled, forces w\bwa\bai\bit\bt to wait for _\bi_\bd to ter-
+ shell has no unwaited-for children, the exit status is 127. If
+ the -\b-p\bp option is supplied, the process or job identifier of the
+ job for which the exit status is returned is assigned to the
+ variable _\bv_\ba_\br_\bn_\ba_\bm_\be named by the option argument. The variable
+ will be unset initially, before any assignment. This is useful
+ only when the -\b-n\bn option is supplied. Supplying the -\b-f\bf option,
+ when job control is enabled, forces w\bwa\bai\bit\bt to wait for _\bi_\bd to ter-
minate before returning its status, instead of returning when it
- changes status. If _\bi_\bd specifies a non-existent process or job,
- the return status is 127. If w\bwa\bai\bit\bt is interrupted by a signal,
- the return status will be greater than 128, as described under
- S\bSI\bIG\bGN\bNA\bAL\bLS\bS above. Otherwise, the return status is the exit status
+ changes status. If _\bi_\bd specifies a non-existent process or job,
+ the return status is 127. If w\bwa\bai\bit\bt is interrupted by a signal,
+ the return status will be greater than 128, as described under
+ S\bSI\bIG\bGN\bNA\bAL\bLS\bS above. Otherwise, the return status is the exit status
of the last process or job waited for.
S\bSH\bHE\bEL\bLL\bL C\bCO\bOM\bMP\bPA\bAT\bTI\bIB\bBI\bIL\bLI\bIT\bTY\bY M\bMO\bOD\bDE\bE
- Bash-4.0 introduced the concept of a _\bs_\bh_\be_\bl_\bl _\bc_\bo_\bm_\bp_\ba_\bt_\bi_\bb_\bi_\bl_\bi_\bt_\by _\bl_\be_\bv_\be_\bl, speci-
- fied as a set of options to the shopt builtin ( c\bco\bom\bmp\bpa\bat\bt3\b31\b1, c\bco\bom\bmp\bpa\bat\bt3\b32\b2,
- c\bco\bom\bmp\bpa\bat\bt4\b40\b0, c\bco\bom\bmp\bpa\bat\bt4\b41\b1, and so on). There is only one current compatibil-
- ity level -- each option is mutually exclusive. The compatibility
- level is intended to allow users to select behavior from previous ver-
- sions that is incompatible with newer versions while they migrate
- scripts to use current features and behavior. It's intended to be a
+ Bash-4.0 introduced the concept of a _\bs_\bh_\be_\bl_\bl _\bc_\bo_\bm_\bp_\ba_\bt_\bi_\bb_\bi_\bl_\bi_\bt_\by _\bl_\be_\bv_\be_\bl, speci-
+ fied as a set of options to the shopt builtin ( c\bco\bom\bmp\bpa\bat\bt3\b31\b1, c\bco\bom\bmp\bpa\bat\bt3\b32\b2,
+ c\bco\bom\bmp\bpa\bat\bt4\b40\b0, c\bco\bom\bmp\bpa\bat\bt4\b41\b1, and so on). There is only one current compatibil-
+ ity level -- each option is mutually exclusive. The compatibility
+ level is intended to allow users to select behavior from previous ver-
+ sions that is incompatible with newer versions while they migrate
+ scripts to use current features and behavior. It's intended to be a
temporary solution.
- This section does not mention behavior that is standard for a particu-
- lar version (e.g., setting c\bco\bom\bmp\bpa\bat\bt3\b32\b2 means that quoting the rhs of the
- regexp matching operator quotes special regexp characters in the word,
+ This section does not mention behavior that is standard for a particu-
+ lar version (e.g., setting c\bco\bom\bmp\bpa\bat\bt3\b32\b2 means that quoting the rhs of the
+ regexp matching operator quotes special regexp characters in the word,
which is default behavior in bash-3.2 and subsequent versions).
- If a user enables, say, c\bco\bom\bmp\bpa\bat\bt3\b32\b2, it may affect the behavior of other
- compatibility levels up to and including the current compatibility
- level. The idea is that each compatibility level controls behavior
- that changed in that version of b\bba\bas\bsh\bh, but that behavior may have been
- present in earlier versions. For instance, the change to use locale-
- based comparisons with the [\b[[\b[ command came in bash-4.1, and earlier
+ If a user enables, say, c\bco\bom\bmp\bpa\bat\bt3\b32\b2, it may affect the behavior of other
+ compatibility levels up to and including the current compatibility
+ level. The idea is that each compatibility level controls behavior
+ that changed in that version of b\bba\bas\bsh\bh, but that behavior may have been
+ present in earlier versions. For instance, the change to use locale-
+ based comparisons with the [\b[[\b[ command came in bash-4.1, and earlier
versions used ASCII-based comparisons, so enabling c\bco\bom\bmp\bpa\bat\bt3\b32\b2 will enable
- ASCII-based comparisons as well. That granularity may not be suffi-
- cient for all uses, and as a result users should employ compatibility
- levels carefully. Read the documentation for a particular feature to
+ ASCII-based comparisons as well. That granularity may not be suffi-
+ cient for all uses, and as a result users should employ compatibility
+ levels carefully. Read the documentation for a particular feature to
find out the current behavior.
- Bash-4.3 introduced a new shell variable: B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bMP\bPA\bAT\bT. The value as-
+ Bash-4.3 introduced a new shell variable: B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bMP\bPA\bAT\bT. The value as-
signed to this variable (a decimal version number like 4.2, or an inte-
- ger corresponding to the c\bco\bom\bmp\bpa\bat\bt_\bN_\bN option, like 42) determines the com-
+ ger corresponding to the c\bco\bom\bmp\bpa\bat\bt_\bN_\bN option, like 42) determines the com-
patibility level.
- Starting with bash-4.4, Bash has begun deprecating older compatibility
- levels. Eventually, the options will be removed in favor of B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bM-\b-
+ Starting with bash-4.4, Bash has begun deprecating older compatibility
+ levels. Eventually, the options will be removed in favor of B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bM-\b-
P\bPA\bAT\bT.
- Bash-5.0 is the final version for which there will be an individual
- shopt option for the previous version. Users should use B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bMP\bPA\bAT\bT on
+ Bash-5.0 is the final version for which there will be an individual
+ shopt option for the previous version. Users should use B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bMP\bPA\bAT\bT on
bash-5.0 and later versions.
- The following table describes the behavior changes controlled by each
+ The following table describes the behavior changes controlled by each
compatibility level setting. The c\bco\bom\bmp\bpa\bat\bt_\bN_\bN tag is used as shorthand for
setting the compatibility level to _\bN_\bN using one of the following mecha-
- nisms. For versions prior to bash-5.0, the compatibility level may be
- set using the corresponding c\bco\bom\bmp\bpa\bat\bt_\bN_\bN shopt option. For bash-4.3 and
- later versions, the B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bMP\bPA\bAT\bT variable is preferred, and it is re-
+ nisms. For versions prior to bash-5.0, the compatibility level may be
+ set using the corresponding c\bco\bom\bmp\bpa\bat\bt_\bN_\bN shopt option. For bash-4.3 and
+ later versions, the B\bBA\bAS\bSH\bH_\b_C\bCO\bOM\bMP\bPA\bAT\bT variable is preferred, and it is re-
quired for bash-5.1 and later versions.
c\bco\bom\bmp\bpa\bat\bt3\b31\b1
ator (=~) has no special effect
c\bco\bom\bmp\bpa\bat\bt3\b32\b2
- +\bo interrupting a command list such as "a ; b ; c" causes
- the execution of the next command in the list (in
- bash-4.0 and later versions, the shell acts as if it re-
- ceived the interrupt, so interrupting one command in a
+ +\bo interrupting a command list such as "a ; b ; c" causes
+ the execution of the next command in the list (in
+ bash-4.0 and later versions, the shell acts as if it re-
+ ceived the interrupt, so interrupting one command in a
list aborts the execution of the entire list)
c\bco\bom\bmp\bpa\bat\bt4\b40\b0
- +\bo the <\b< and >\b> operators to the [\b[[\b[ command do not consider
+ +\bo the <\b< and >\b> operators to the [\b[[\b[ command do not consider
the current locale when comparing strings; they use ASCII
ordering. Bash versions prior to bash-4.1 use ASCII col-
- lation and _\bs_\bt_\br_\bc_\bm_\bp(3); bash-4.1 and later use the current
+ lation and _\bs_\bt_\br_\bc_\bm_\bp(3); bash-4.1 and later use the current
locale's collation sequence and _\bs_\bt_\br_\bc_\bo_\bl_\bl(3).
c\bco\bom\bmp\bpa\bat\bt4\b41\b1
- +\bo in _\bp_\bo_\bs_\bi_\bx mode, t\bti\bim\bme\be may be followed by options and still
+ +\bo in _\bp_\bo_\bs_\bi_\bx mode, t\bti\bim\bme\be may be followed by options and still
be recognized as a reserved word (this is POSIX interpre-
tation 267)
+\bo in _\bp_\bo_\bs_\bi_\bx mode, the parser requires that an even number of
- single quotes occur in the _\bw_\bo_\br_\bd portion of a double-
- quoted parameter expansion and treats them specially, so
- that characters within the single quotes are considered
+ single quotes occur in the _\bw_\bo_\br_\bd portion of a double-
+ quoted parameter expansion and treats them specially, so
+ that characters within the single quotes are considered
quoted (this is POSIX interpretation 221)
c\bco\bom\bmp\bpa\bat\bt4\b42\b2
+\bo the replacement string in double-quoted pattern substitu-
- tion does not undergo quote removal, as it does in ver-
+ tion does not undergo quote removal, as it does in ver-
sions after bash-4.2
- +\bo in posix mode, single quotes are considered special when
- expanding the _\bw_\bo_\br_\bd portion of a double-quoted parameter
- expansion and can be used to quote a closing brace or
- other special character (this is part of POSIX interpre-
- tation 221); in later versions, single quotes are not
+ +\bo in posix mode, single quotes are considered special when
+ expanding the _\bw_\bo_\br_\bd portion of a double-quoted parameter
+ expansion and can be used to quote a closing brace or
+ other special character (this is part of POSIX interpre-
+ tation 221); in later versions, single quotes are not
special within double-quoted word expansions
c\bco\bom\bmp\bpa\bat\bt4\b43\b3
- +\bo the shell does not print a warning message if an attempt
- is made to use a quoted compound assignment as an argu-
- ment to declare (e.g., declare -a foo='(1 2)'). Later
+ +\bo the shell does not print a warning message if an attempt
+ is made to use a quoted compound assignment as an argu-
+ ment to declare (e.g., declare -a foo='(1 2)'). Later
versions warn that this usage is deprecated
- +\bo word expansion errors are considered non-fatal errors
- that cause the current command to fail, even in posix
- mode (the default behavior is to make them fatal errors
+ +\bo word expansion errors are considered non-fatal errors
+ that cause the current command to fail, even in posix
+ mode (the default behavior is to make them fatal errors
that cause the shell to exit)
- +\bo when executing a shell function, the loop state
+ +\bo when executing a shell function, the loop state
(while/until/etc.) is not reset, so b\bbr\bre\bea\bak\bk or c\bco\bon\bnt\bti\bin\bnu\bue\be in
that function will break or continue loops in the calling
- context. Bash-4.4 and later reset the loop state to pre-
+ context. Bash-4.4 and later reset the loop state to pre-
vent this
c\bco\bom\bmp\bpa\bat\bt4\b44\b4
- +\bo the shell sets up the values used by B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGV\bV and
- B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGC\bC so they can expand to the shell's positional
+ +\bo the shell sets up the values used by B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGV\bV and
+ B\bBA\bAS\bSH\bH_\b_A\bAR\bRG\bGC\bC so they can expand to the shell's positional
parameters even if extended debugging mode is not enabled
- +\bo a subshell inherits loops from its parent context, so
- b\bbr\bre\bea\bak\bk or c\bco\bon\bnt\bti\bin\bnu\bue\be will cause the subshell to exit.
- Bash-5.0 and later reset the loop state to prevent the
+ +\bo a subshell inherits loops from its parent context, so
+ b\bbr\bre\bea\bak\bk or c\bco\bon\bnt\bti\bin\bnu\bue\be will cause the subshell to exit.
+ Bash-5.0 and later reset the loop state to prevent the
exit
- +\bo variable assignments preceding builtins like e\bex\bxp\bpo\bor\brt\bt and
+ +\bo variable assignments preceding builtins like e\bex\bxp\bpo\bor\brt\bt and
r\bre\bea\bad\bdo\bon\bnl\bly\by that set attributes continue to affect variables
with the same name in the calling environment even if the
shell is not in posix mode
c\bco\bom\bmp\bpa\bat\bt5\b50\b0
- +\bo Bash-5.1 changed the way $\b$R\bRA\bAN\bND\bDO\bOM\bM is generated to intro-
+ +\bo Bash-5.1 changed the way $\b$R\bRA\bAN\bND\bDO\bOM\bM is generated to intro-
duce slightly more randomness. If the shell compatibility
- level is set to 50 or lower, it reverts to the method
- from bash-5.0 and previous versions, so seeding the ran-
- dom number generator by assigning a value to R\bRA\bAN\bND\bDO\bOM\bM will
+ level is set to 50 or lower, it reverts to the method
+ from bash-5.0 and previous versions, so seeding the ran-
+ dom number generator by assigning a value to R\bRA\bAN\bND\bDO\bOM\bM will
produce the same sequence as in bash-5.0
- +\bo If the command hash table is empty, bash versions prior
- to bash-5.1 printed an informational message to that ef-
- fect, even when producing output that can be reused as
- input. Bash-5.1 suppresses that message when the -\b-l\bl op-
+ +\bo If the command hash table is empty, bash versions prior
+ to bash-5.1 printed an informational message to that ef-
+ fect, even when producing output that can be reused as
+ input. Bash-5.1 suppresses that message when the -\b-l\bl op-
tion is supplied.
c\bco\bom\bmp\bpa\bat\bt5\b51\b1
- +\bo The u\bun\bns\bse\bet\bt builtin treats attempts to unset array sub-
- scripts @\b@ and *\b* differently depending on whether the ar-
- ray is indexed or associative, and differently than in
+ +\bo The u\bun\bns\bse\bet\bt builtin treats attempts to unset array sub-
+ scripts @\b@ and *\b* differently depending on whether the ar-
+ ray is indexed or associative, and differently than in
previous versions.
R\bRE\bES\bST\bTR\bRI\bIC\bCT\bTE\bED\bD S\bSH\bHE\bEL\bLL\bL
If b\bba\bas\bsh\bh is started with the name r\brb\bba\bas\bsh\bh, or the -\b-r\br option is supplied at
- invocation, the shell becomes restricted. A restricted shell is used
- to set up an environment more controlled than the standard shell. It
- behaves identically to b\bba\bas\bsh\bh with the exception that the following are
+ invocation, the shell becomes restricted. A restricted shell is used
+ to set up an environment more controlled than the standard shell. It
+ behaves identically to b\bba\bas\bsh\bh with the exception that the following are
disallowed or not performed:
+\bo changing directories with c\bcd\bd
- +\bo setting or unsetting the values of S\bSH\bHE\bEL\bLL\bL, P\bPA\bAT\bTH\bH, H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE, E\bEN\bNV\bV,
+ +\bo setting or unsetting the values of S\bSH\bHE\bEL\bLL\bL, P\bPA\bAT\bTH\bH, H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE, E\bEN\bNV\bV,
or B\bBA\bAS\bSH\bH_\b_E\bEN\bNV\bV
+\bo specifying command names containing /\b/
- +\bo specifying a filename containing a /\b/ as an argument to the .\b.
+ +\bo specifying a filename containing a /\b/ as an argument to the .\b.
builtin command
- +\bo specifying a filename containing a slash as an argument to the
+ +\bo specifying a filename containing a slash as an argument to the
h\bhi\bis\bst\bto\bor\bry\by builtin command
- +\bo specifying a filename containing a slash as an argument to the
+ +\bo specifying a filename containing a slash as an argument to the
-\b-p\bp option to the h\bha\bas\bsh\bh builtin command
- +\bo importing function definitions from the shell environment at
+ +\bo importing function definitions from the shell environment at
startup
- +\bo parsing the value of S\bSH\bHE\bEL\bLL\bLO\bOP\bPT\bTS\bS from the shell environment at
+ +\bo parsing the value of S\bSH\bHE\bEL\bLL\bLO\bOP\bPT\bTS\bS from the shell environment at
startup
+\bo redirecting output using the >, >|, <>, >&, &>, and >> redirect-
+\bo using the e\bex\bxe\bec\bc builtin command to replace the shell with another
command
- +\bo adding or deleting builtin commands with the -\b-f\bf and -\b-d\bd options
+ +\bo adding or deleting builtin commands with the -\b-f\bf and -\b-d\bd options
to the e\ben\bna\bab\bbl\ble\be builtin command
- +\bo using the e\ben\bna\bab\bbl\ble\be builtin command to enable disabled shell
+ +\bo using the e\ben\bna\bab\bbl\ble\be builtin command to enable disabled shell
builtins
+\bo specifying the -\b-p\bp option to the c\bco\bom\bmm\bma\ban\bnd\bd builtin command
- +\bo turning off restricted mode with s\bse\bet\bt +\b+r\br or s\bsh\bho\bop\bpt\bt -\b-u\bu r\bre\be-\b-
+ +\bo turning off restricted mode with s\bse\bet\bt +\b+r\br or s\bsh\bho\bop\bpt\bt -\b-u\bu r\bre\be-\b-
s\bst\btr\bri\bic\bct\bte\bed\bd_\b_s\bsh\bhe\bel\bll\bl.
These restrictions are enforced after any startup files are read.
When a command that is found to be a shell script is executed (see C\bCO\bOM\bM-\b-
- M\bMA\bAN\bND\bD E\bEX\bXE\bEC\bCU\bUT\bTI\bIO\bON\bN above), r\brb\bba\bas\bsh\bh turns off any restrictions in the shell
+ M\bMA\bAN\bND\bD E\bEX\bXE\bEC\bCU\bUT\bTI\bIO\bON\bN above), r\brb\bba\bas\bsh\bh turns off any restrictions in the shell
spawned to execute the script.
S\bSE\bEE\bE A\bAL\bLS\bSO\bO
_\bB_\ba_\bs_\bh _\bR_\be_\bf_\be_\br_\be_\bn_\bc_\be _\bM_\ba_\bn_\bu_\ba_\bl, Brian Fox and Chet Ramey
_\bT_\bh_\be _\bG_\bn_\bu _\bR_\be_\ba_\bd_\bl_\bi_\bn_\be _\bL_\bi_\bb_\br_\ba_\br_\by, Brian Fox and Chet Ramey
_\bT_\bh_\be _\bG_\bn_\bu _\bH_\bi_\bs_\bt_\bo_\br_\by _\bL_\bi_\bb_\br_\ba_\br_\by, Brian Fox and Chet Ramey
- _\bP_\bo_\br_\bt_\ba_\bb_\bl_\be _\bO_\bp_\be_\br_\ba_\bt_\bi_\bn_\bg _\bS_\by_\bs_\bt_\be_\bm _\bI_\bn_\bt_\be_\br_\bf_\ba_\bc_\be _\b(_\bP_\bO_\bS_\bI_\bX_\b) _\bP_\ba_\br_\bt _\b2_\b: _\bS_\bh_\be_\bl_\bl _\ba_\bn_\bd _\bU_\bt_\bi_\bl_\bi_\b-
+ _\bP_\bo_\br_\bt_\ba_\bb_\bl_\be _\bO_\bp_\be_\br_\ba_\bt_\bi_\bn_\bg _\bS_\by_\bs_\bt_\be_\bm _\bI_\bn_\bt_\be_\br_\bf_\ba_\bc_\be _\b(_\bP_\bO_\bS_\bI_\bX_\b) _\bP_\ba_\br_\bt _\b2_\b: _\bS_\bh_\be_\bl_\bl _\ba_\bn_\bd _\bU_\bt_\bi_\bl_\bi_\b-
_\bt_\bi_\be_\bs, IEEE --
http://pubs.opengroup.org/onlinepubs/9699919799/
http://tiswww.case.edu/~chet/bash/POSIX -- a description of posix mode
_\b~_\b/_\b._\bb_\ba_\bs_\bh_\br_\bc
The individual per-interactive-shell startup file
_\b~_\b/_\b._\bb_\ba_\bs_\bh_\b__\bl_\bo_\bg_\bo_\bu_\bt
- The individual login shell cleanup file, executed when a login
+ The individual login shell cleanup file, executed when a login
shell exits
_\b~_\b/_\b._\bb_\ba_\bs_\bh_\b__\bh_\bi_\bs_\bt_\bo_\br_\by
- The default value of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE, the file in which bash saves the
+ The default value of H\bHI\bIS\bST\bTF\bFI\bIL\bLE\bE, the file in which bash saves the
command history
_\b~_\b/_\b._\bi_\bn_\bp_\bu_\bt_\br_\bc
Individual _\br_\be_\ba_\bd_\bl_\bi_\bn_\be initialization file
B\bBU\bUG\bG R\bRE\bEP\bPO\bOR\bRT\bTS\bS
If you find a bug in b\bba\bas\bsh\bh,\b, you should report it. But first, you should
- make sure that it really is a bug, and that it appears in the latest
- version of b\bba\bas\bsh\bh. The latest version is always available from
+ make sure that it really is a bug, and that it appears in the latest
+ version of b\bba\bas\bsh\bh. The latest version is always available from
_\bf_\bt_\bp_\b:_\b/_\b/_\bf_\bt_\bp_\b._\bg_\bn_\bu_\b._\bo_\br_\bg_\b/_\bp_\bu_\bb_\b/_\bg_\bn_\bu_\b/_\bb_\ba_\bs_\bh_\b/ and _\bh_\bt_\bt_\bp_\b:_\b/_\b/_\bg_\bi_\bt_\b._\bs_\ba_\bv_\ba_\bn_\b-
_\bn_\ba_\bh_\b._\bg_\bn_\bu_\b._\bo_\br_\bg_\b/_\bc_\bg_\bi_\bt_\b/_\bb_\ba_\bs_\bh_\b._\bg_\bi_\bt_\b/_\bs_\bn_\ba_\bp_\bs_\bh_\bo_\bt_\b/_\bb_\ba_\bs_\bh_\b-_\bm_\ba_\bs_\bt_\be_\br_\b._\bt_\ba_\br_\b._\bg_\bz.
- Once you have determined that a bug actually exists, use the _\bb_\ba_\bs_\bh_\bb_\bu_\bg
- command to submit a bug report. If you have a fix, you are encouraged
- to mail that as well! Suggestions and `philosophical' bug reports may
- be mailed to _\bb_\bu_\bg_\b-_\bb_\ba_\bs_\bh_\b@_\bg_\bn_\bu_\b._\bo_\br_\bg or posted to the Usenet newsgroup
+ Once you have determined that a bug actually exists, use the _\bb_\ba_\bs_\bh_\bb_\bu_\bg
+ command to submit a bug report. If you have a fix, you are encouraged
+ to mail that as well! Suggestions and `philosophical' bug reports may
+ be mailed to _\bb_\bu_\bg_\b-_\bb_\ba_\bs_\bh_\b@_\bg_\bn_\bu_\b._\bo_\br_\bg or posted to the Usenet newsgroup
g\bgn\bnu\bu.\b.b\bba\bas\bsh\bh.\b.b\bbu\bug\bg.
ALL bug reports should include:
A description of the bug behaviour
A short script or `recipe' which exercises the bug
- _\bb_\ba_\bs_\bh_\bb_\bu_\bg inserts the first three items automatically into the template
+ _\bb_\ba_\bs_\bh_\bb_\bu_\bg inserts the first three items automatically into the template
it provides for filing a bug report.
Comments and bug reports concerning this manual page should be directed
Shell builtin commands and functions are not stoppable/restartable.
Compound commands and command sequences of the form `a ; b ; c' are not
- handled gracefully when process suspension is attempted. When a
- process is stopped, the shell immediately executes the next command in
- the sequence. It suffices to place the sequence of commands between
- parentheses to force it into a subshell, which may be stopped as a
+ handled gracefully when process suspension is attempted. When a
+ process is stopped, the shell immediately executes the next command in
+ the sequence. It suffices to place the sequence of commands between
+ parentheses to force it into a subshell, which may be stopped as a
unit.
Array variables may not (yet) be exported.
-GNU Bash 5.3 2023 July 7 BASH(1)
+GNU Bash 5.3 2023 July 19 BASH(1)
projects / thirdparty / bash.git / commitdiff
