This patch moves the gdb/gnulib subdirectory to the top level.
It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this. However, gdbserver still builds its own
copy of gnulib, just from the new source location.
A small hack was needed to ensure that gnulib is only built when gdb
is enabled. The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.
Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.
Tested by the buildbot.
ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Add gnulib.
* gnulib: New directory, move from gdb/gnulib.
* configure.ac (host_libs): Add gnulib.
* configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* gnulib: Move directory to top-level.
* configure.ac: Don't configure gnulib.
* configure: Rebuild.
* common/common-defs.h: Use new path to gnulib.
* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
(GNULIB_H): Remove.
(INCGNU): Look in new gnulib location.
(HFILES_NO_SRCDIR): Remove gnulib files.
(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
(generated_files): Remove GNULIB_H.
($(LIBGNU), all-lib): Remove targets.
(distclean): Don't mention GNULIB_BUILDDIR.
($(GNULIB_BUILDDIR)/Makefile): Remove target.
gdb/gdbserver/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* configure.ac: Use new path to gnulib.
* configure: Rebuild.
* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
to gnulib.
gnulib/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* update-gnulib.sh: Adjust paths.
* Makefile.in: Adjust paths.
* configure.ac: Adjust paths. Use ACX_LARGEFILE.
* configure: Rebuild.
+2019-06-14 Tom Tromey <tom@tromey.com>
+
+ * MAINTAINERS: Add gnulib.
+ * gnulib: New directory, move from gdb/gnulib.
+ * configure.ac (host_libs): Add gnulib.
+ * configure: Rebuild.
+ * Makefile.def (host_modules, dependencies): Add gnulib.
+ * Makefile.in: Rebuild.
+
2019-06-03 Nick Clifton <nickc@redhat.com>
Revert:
depcomp; mkinstalldirs
Send bug reports and patches to bug-automake@gnu.org.
-gdb/; readline/; sim/; GDB's part of include/
+gdb/; gnulib/; readline/; sim/; GDB's part of include/
GDB: http://www.gnu.org/software/gdb/
Patches to gdb-patches@sourceware.org.
See also gdb/MAINTAINERS and sim/MAINTAINERS.
host_modules= { module= zlib; no_install=true; no_check=true;
bootstrap=true;
extra_configure_flags='@extra_host_zlib_configure_flags@';};
+host_modules= { module= gnulib; };
host_modules= { module= gdb; };
host_modules= { module= expect; };
host_modules= { module= guile; };
dependencies = { module=configure-gdb; on=all-intl; };
dependencies = { module=configure-gdb; on=configure-sim; };
dependencies = { module=configure-gdb; on=all-bfd; };
+dependencies = { module=configure-gdb; on=all-gnulib; };
// Depend on all-libiconv so that configure checks for iconv
// functions will work.
dependencies = { module=configure-gdb; on=all-libiconv; };
dependencies = { module=all-gdb; on=all-libiberty; };
dependencies = { module=all-gdb; on=all-libiconv; };
+dependencies = { module=all-gdb; on=all-gnulib; };
dependencies = { module=all-gdb; on=all-opcodes; };
dependencies = { module=all-gdb; on=all-readline; };
dependencies = { module=all-gdb; on=all-build-bison; };
maybe-configure-sim \
maybe-configure-texinfo \
maybe-configure-zlib \
+ maybe-configure-gnulib \
maybe-configure-gdb \
maybe-configure-expect \
maybe-configure-guile \
@if zlib-no-bootstrap
all-host: maybe-all-zlib
@endif zlib-no-bootstrap
+all-host: maybe-all-gnulib
all-host: maybe-all-gdb
all-host: maybe-all-expect
all-host: maybe-all-guile
info-host: maybe-info-sim
info-host: maybe-info-texinfo
info-host: maybe-info-zlib
+info-host: maybe-info-gnulib
info-host: maybe-info-gdb
info-host: maybe-info-expect
info-host: maybe-info-guile
dvi-host: maybe-dvi-sim
dvi-host: maybe-dvi-texinfo
dvi-host: maybe-dvi-zlib
+dvi-host: maybe-dvi-gnulib
dvi-host: maybe-dvi-gdb
dvi-host: maybe-dvi-expect
dvi-host: maybe-dvi-guile
pdf-host: maybe-pdf-sim
pdf-host: maybe-pdf-texinfo
pdf-host: maybe-pdf-zlib
+pdf-host: maybe-pdf-gnulib
pdf-host: maybe-pdf-gdb
pdf-host: maybe-pdf-expect
pdf-host: maybe-pdf-guile
html-host: maybe-html-sim
html-host: maybe-html-texinfo
html-host: maybe-html-zlib
+html-host: maybe-html-gnulib
html-host: maybe-html-gdb
html-host: maybe-html-expect
html-host: maybe-html-guile
TAGS-host: maybe-TAGS-sim
TAGS-host: maybe-TAGS-texinfo
TAGS-host: maybe-TAGS-zlib
+TAGS-host: maybe-TAGS-gnulib
TAGS-host: maybe-TAGS-gdb
TAGS-host: maybe-TAGS-expect
TAGS-host: maybe-TAGS-guile
install-info-host: maybe-install-info-sim
install-info-host: maybe-install-info-texinfo
install-info-host: maybe-install-info-zlib
+install-info-host: maybe-install-info-gnulib
install-info-host: maybe-install-info-gdb
install-info-host: maybe-install-info-expect
install-info-host: maybe-install-info-guile
install-pdf-host: maybe-install-pdf-sim
install-pdf-host: maybe-install-pdf-texinfo
install-pdf-host: maybe-install-pdf-zlib
+install-pdf-host: maybe-install-pdf-gnulib
install-pdf-host: maybe-install-pdf-gdb
install-pdf-host: maybe-install-pdf-expect
install-pdf-host: maybe-install-pdf-guile
install-html-host: maybe-install-html-sim
install-html-host: maybe-install-html-texinfo
install-html-host: maybe-install-html-zlib
+install-html-host: maybe-install-html-gnulib
install-html-host: maybe-install-html-gdb
install-html-host: maybe-install-html-expect
install-html-host: maybe-install-html-guile
installcheck-host: maybe-installcheck-sim
installcheck-host: maybe-installcheck-texinfo
installcheck-host: maybe-installcheck-zlib
+installcheck-host: maybe-installcheck-gnulib
installcheck-host: maybe-installcheck-gdb
installcheck-host: maybe-installcheck-expect
installcheck-host: maybe-installcheck-guile
mostlyclean-host: maybe-mostlyclean-sim
mostlyclean-host: maybe-mostlyclean-texinfo
mostlyclean-host: maybe-mostlyclean-zlib
+mostlyclean-host: maybe-mostlyclean-gnulib
mostlyclean-host: maybe-mostlyclean-gdb
mostlyclean-host: maybe-mostlyclean-expect
mostlyclean-host: maybe-mostlyclean-guile
clean-host: maybe-clean-sim
clean-host: maybe-clean-texinfo
clean-host: maybe-clean-zlib
+clean-host: maybe-clean-gnulib
clean-host: maybe-clean-gdb
clean-host: maybe-clean-expect
clean-host: maybe-clean-guile
distclean-host: maybe-distclean-sim
distclean-host: maybe-distclean-texinfo
distclean-host: maybe-distclean-zlib
+distclean-host: maybe-distclean-gnulib
distclean-host: maybe-distclean-gdb
distclean-host: maybe-distclean-expect
distclean-host: maybe-distclean-guile
maintainer-clean-host: maybe-maintainer-clean-sim
maintainer-clean-host: maybe-maintainer-clean-texinfo
maintainer-clean-host: maybe-maintainer-clean-zlib
+maintainer-clean-host: maybe-maintainer-clean-gnulib
maintainer-clean-host: maybe-maintainer-clean-gdb
maintainer-clean-host: maybe-maintainer-clean-expect
maintainer-clean-host: maybe-maintainer-clean-guile
maybe-check-sim \
maybe-check-texinfo \
maybe-check-zlib \
+ maybe-check-gnulib \
maybe-check-gdb \
maybe-check-expect \
maybe-check-guile \
maybe-install-sim \
maybe-install-texinfo \
maybe-install-zlib \
+ maybe-install-gnulib \
maybe-install-gdb \
maybe-install-expect \
maybe-install-guile \
maybe-install-sim \
maybe-install-texinfo \
maybe-install-zlib \
+ maybe-install-gnulib \
maybe-install-gdb \
maybe-install-expect \
maybe-install-guile \
maybe-install-strip-sim \
maybe-install-strip-texinfo \
maybe-install-strip-zlib \
+ maybe-install-strip-gnulib \
maybe-install-strip-gdb \
maybe-install-strip-expect \
maybe-install-strip-guile \
+.PHONY: configure-gnulib maybe-configure-gnulib
+maybe-configure-gnulib:
+@if gcc-bootstrap
+configure-gnulib: stage_current
+@endif gcc-bootstrap
+@if gnulib
+maybe-configure-gnulib: configure-gnulib
+configure-gnulib:
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ test ! -f $(HOST_SUBDIR)/gnulib/Makefile || exit 0; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/gnulib; \
+ $(HOST_EXPORTS) \
+ echo Configuring in $(HOST_SUBDIR)/gnulib; \
+ cd "$(HOST_SUBDIR)/gnulib" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/gnulib/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=gnulib; \
+ $(SHELL) \
+ $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ || exit 1
+@endif gnulib
+
+
+
+
+
+.PHONY: all-gnulib maybe-all-gnulib
+maybe-all-gnulib:
+@if gcc-bootstrap
+all-gnulib: stage_current
+@endif gcc-bootstrap
+@if gnulib
+TARGET-gnulib=all
+maybe-all-gnulib: all-gnulib
+all-gnulib: configure-gnulib
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(STAGE1_FLAGS_TO_PASS) \
+ $(TARGET-gnulib))
+@endif gnulib
+
+
+
+
+.PHONY: check-gnulib maybe-check-gnulib
+maybe-check-gnulib:
+@if gnulib
+maybe-check-gnulib: check-gnulib
+
+check-gnulib:
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(FLAGS_TO_PASS) check)
+
+@endif gnulib
+
+.PHONY: install-gnulib maybe-install-gnulib
+maybe-install-gnulib:
+@if gnulib
+maybe-install-gnulib: install-gnulib
+
+install-gnulib: installdirs
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(FLAGS_TO_PASS) install)
+
+@endif gnulib
+
+.PHONY: install-strip-gnulib maybe-install-strip-gnulib
+maybe-install-strip-gnulib:
+@if gnulib
+maybe-install-strip-gnulib: install-strip-gnulib
+
+install-strip-gnulib: installdirs
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(FLAGS_TO_PASS) install-strip)
+
+@endif gnulib
+
+# Other targets (info, dvi, pdf, etc.)
+
+.PHONY: maybe-info-gnulib info-gnulib
+maybe-info-gnulib:
+@if gnulib
+maybe-info-gnulib: info-gnulib
+
+info-gnulib: \
+ configure-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing info in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ info) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-dvi-gnulib dvi-gnulib
+maybe-dvi-gnulib:
+@if gnulib
+maybe-dvi-gnulib: dvi-gnulib
+
+dvi-gnulib: \
+ configure-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing dvi in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ dvi) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-pdf-gnulib pdf-gnulib
+maybe-pdf-gnulib:
+@if gnulib
+maybe-pdf-gnulib: pdf-gnulib
+
+pdf-gnulib: \
+ configure-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing pdf in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ pdf) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-html-gnulib html-gnulib
+maybe-html-gnulib:
+@if gnulib
+maybe-html-gnulib: html-gnulib
+
+html-gnulib: \
+ configure-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing html in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ html) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-TAGS-gnulib TAGS-gnulib
+maybe-TAGS-gnulib:
+@if gnulib
+maybe-TAGS-gnulib: TAGS-gnulib
+
+TAGS-gnulib: \
+ configure-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing TAGS in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ TAGS) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-install-info-gnulib install-info-gnulib
+maybe-install-info-gnulib:
+@if gnulib
+maybe-install-info-gnulib: install-info-gnulib
+
+install-info-gnulib: \
+ configure-gnulib \
+ info-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-info in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-info) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-install-pdf-gnulib install-pdf-gnulib
+maybe-install-pdf-gnulib:
+@if gnulib
+maybe-install-pdf-gnulib: install-pdf-gnulib
+
+install-pdf-gnulib: \
+ configure-gnulib \
+ pdf-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-pdf in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-pdf) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-install-html-gnulib install-html-gnulib
+maybe-install-html-gnulib:
+@if gnulib
+maybe-install-html-gnulib: install-html-gnulib
+
+install-html-gnulib: \
+ configure-gnulib \
+ html-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-html in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-html) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-installcheck-gnulib installcheck-gnulib
+maybe-installcheck-gnulib:
+@if gnulib
+maybe-installcheck-gnulib: installcheck-gnulib
+
+installcheck-gnulib: \
+ configure-gnulib
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing installcheck in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ installcheck) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-mostlyclean-gnulib mostlyclean-gnulib
+maybe-mostlyclean-gnulib:
+@if gnulib
+maybe-mostlyclean-gnulib: mostlyclean-gnulib
+
+mostlyclean-gnulib:
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing mostlyclean in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ mostlyclean) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-clean-gnulib clean-gnulib
+maybe-clean-gnulib:
+@if gnulib
+maybe-clean-gnulib: clean-gnulib
+
+clean-gnulib:
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing clean in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ clean) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-distclean-gnulib distclean-gnulib
+maybe-distclean-gnulib:
+@if gnulib
+maybe-distclean-gnulib: distclean-gnulib
+
+distclean-gnulib:
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing distclean in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ distclean) \
+ || exit 1
+
+@endif gnulib
+
+.PHONY: maybe-maintainer-clean-gnulib maintainer-clean-gnulib
+maybe-maintainer-clean-gnulib:
+@if gnulib
+maybe-maintainer-clean-gnulib: maintainer-clean-gnulib
+
+maintainer-clean-gnulib:
+ @: $(MAKE); $(unstage)
+ @[ -f ./gnulib/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing maintainer-clean in gnulib"; \
+ (cd $(HOST_SUBDIR)/gnulib && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ maintainer-clean) \
+ || exit 1
+
+@endif gnulib
+
+
+
.PHONY: configure-gdb maybe-configure-gdb
maybe-configure-gdb:
@if gcc-bootstrap
all-stageprofile-intl: maybe-all-stageprofile-libiconv
all-stagefeedback-intl: maybe-all-stagefeedback-libiconv
configure-gdb: maybe-configure-sim
+configure-gdb: maybe-all-gnulib
+all-gdb: maybe-all-gnulib
all-gdb: maybe-all-readline
all-gdb: maybe-all-build-bison
all-gdb: maybe-all-sim
CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+# gdb depends on gnulib, but as nothing else does, only include it if
+# gdb is built.
+if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
+ # The Makefile provides the ordering, so it's enough here to add
+ # gnulib to the list.
+ configdirs="${configdirs} gnulib"
+fi
+
# Strip out unwanted targets.
# While at that, we remove Makefiles if we were started for recursive
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
-# 2014, 2015, 2016 Free Software Foundation, Inc.
+# 2014, 2015, 2016, 2019 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+# gdb depends on gnulib, but as nothing else does, only include it if
+# gdb is built.
+if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
+ # The Makefile provides the ordering, so it's enough here to add
+ # gnulib to the list.
+ configdirs="${configdirs} gnulib"
+fi
+
# Strip out unwanted targets.
# While at that, we remove Makefiles if we were started for recursive
+2019-06-14 Tom Tromey <tom@tromey.com>
+
+ * gnulib: Move directory to top-level.
+ * configure.ac: Don't configure gnulib.
+ * configure: Rebuild.
+ * common/common-defs.h: Use new path to gnulib.
+ * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
+ (GNULIB_H): Remove.
+ (INCGNU): Look in new gnulib location.
+ (HFILES_NO_SRCDIR): Remove gnulib files.
+ (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
+ (generated_files): Remove GNULIB_H.
+ ($(LIBGNU), all-lib): Remove targets.
+ (distclean): Don't mention GNULIB_BUILDDIR.
+ ($(GNULIB_BUILDDIR)/Makefile): Remove target.
+
2019-06-14 Tom Tromey <tromey@adacore.com>
* symfile.c (add_symbol_file_command): Remove obsolete comment.
GDBFLAGS =
# Helper code from gnulib.
-GNULIB_BUILDDIR = build-gnulib
+GNULIB_BUILDDIR = ../gnulib
LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
-INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
-
-# Generated headers in the gnulib directory. These must be listed
-# so that they are generated before other files are compiled.
-GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
+INCGNU = -I$(srcdir)/../gnulib/import -I$(GNULIB_BUILDDIR)/import
#
# CLI sub directory definitons
config/djgpp/nl_types.h \
config/i386/nm-i386gnu.h \
config/sparc/nm-sol2.h \
- gnulib/import/inttypes.in.h \
- gnulib/import/stddef.in.h \
- gnulib/import/stdint.in.h \
- gnulib/import/str-two-way.h \
- gnulib/import/string.in.h \
- gnulib/import/extra/snippet/arg-nonnull.h \
- gnulib/import/extra/snippet/c++defs.h \
- gnulib/import/extra/snippet/warn-on-use.h \
mi/mi-cmds.h \
mi/mi-common.h \
mi/mi-console.h \
$(SUBDIR_TARGET_OBS) \
$(SUBDIR_GCC_COMPILE_OBS)
-SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
+SUBDIRS = doc @subdirs@ data-directory
CLEANDIRS = $(SUBDIRS)
# List of subdirectories in the build tree that must exist.
# This is used to force build failures in existing trees when
# a new directory is added.
# The format here is for the `case' shell command.
-REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
+REQUIRED_SUBDIRS = doc | testsuite | data-directory
# Parser intermediate files.
YYFILES = \
config.h \
gcore \
jit-reader.h \
- $(GNULIB_H) \
$(NAT_GENERATED_FILES)
# Flags needed to compile Python code
$(ECHO_SIGN) $(CODESIGN) -s $(CODESIGN_CERT) gdb$(EXEEXT)
endif
-# Convenience rule to handle recursion.
-$(LIBGNU) $(GNULIB_H): all-lib
-all-lib: $(GNULIB_BUILDDIR)/Makefile
- @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
-.PHONY: all-lib
-
# Convenience rule to handle recursion.
.PHONY: all-data-directory
all-data-directory: data-directory/Makefile
# always included in SUBDIRS. Remove the gdbserver files explicitly.
distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
- rm -rf $(GNULIB_BUILDDIR)
rm -f gdbserver/config.status gdbserver/config.log
rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
rm -f gdbserver/Makefile gdbserver/config.cache
CONFIG_HEADERS= \
$(SHELL) config.status
-$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
- @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
- CONFIG_COMMANDS="depfiles" \
- CONFIG_HEADERS= \
- CONFIG_LINKS= \
- $(SHELL) config.status
-
data-directory/Makefile: data-directory/Makefile.in config.status
CONFIG_FILES="data-directory/Makefile" \
CONFIG_COMMANDS="depfiles" \
#ifdef GDBSERVER
#include "build-gnulib-gdbserver/config.h"
#else
-#include "build-gnulib/config.h"
+#include "../../gnulib/config.h"
#endif
#undef PACKAGE_NAME
MAKEINFOFLAGS
MAKEINFO
PACKAGE
-GNULIB_STDINT_H
CATOBJEXT
GENCAT
INSTOBJEXT
fi
-gnulib_extra_configure_args=
-# If large-file support is disabled, make sure gnulib does the same.
-if test "$enable_largefile" = no; then
-gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
-fi
-
-# Configure gnulib. We need to build gnulib under some other
-# directory not "gnulib", to avoid the problem of both GDB and
-# GDBserver wanting to build it in the same directory, when building
-# in the source dir.
-
- in_src="gnulib"
- in_build="build-gnulib"
- in_extra_args="$gnulib_extra_configure_args"
-
- # Remove --cache-file, --srcdir, and --disable-option-checking arguments
- # so they do not pile up.
- ac_sub_configure_args=
- ac_prev=
- eval "set x $ac_configure_args"
- shift
- for ac_arg
- do
- if test -n "$ac_prev"; then
- ac_prev=
- continue
- fi
- case $ac_arg in
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
- | --c=*)
- ;;
- --config-cache | -C)
- ;;
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- ;;
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- ;;
- --disable-option-checking)
- ;;
- *)
- case $ac_arg in
- *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
- esac
- done
-
- # Always prepend --prefix to ensure using the same prefix
- # in subdir configurations.
- ac_arg="--prefix=$prefix"
- case $ac_arg in
- *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
-
- # Pass --silent
- if test "$silent" = yes; then
- ac_sub_configure_args="--silent $ac_sub_configure_args"
- fi
-
- # Always prepend --disable-option-checking to silence warnings, since
- # different subdirs can have different --enable and --with options.
- ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
-
- ac_popdir=`pwd`
- ac_dir=$in_build
-
- ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
- $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
- $as_echo "$ac_msg" >&6
- as_dir="$ac_dir"; as_fn_mkdir_p
-
- case $srcdir in
- [\\/]* | ?:[\\/]* )
- ac_srcdir=$srcdir/$in_src ;;
- *) # Relative name.
- ac_srcdir=../$srcdir/$in_src ;;
- esac
-
- cd "$ac_dir"
-
- ac_sub_configure=$ac_srcdir/configure
-
- # Make the cache file name correct relative to the subdirectory.
- case $cache_file in
- [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
- *) # Relative name.
- ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
- esac
-
- if test -n "$in_extra_args"; then
- # Add the extra args at the end.
- ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
- # The eval makes quoting arguments work.
- eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
- --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
- as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
-
- cd "$ac_popdir"
-
-
CONFIG_OBS=
CONFIG_DEPS=
CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
fi
-GNULIB=build-gnulib/import
-
-# For Makefile dependencies.
-GNULIB_STDINT_H=
-if test x"$STDINT_H" != x; then
- GNULIB_STDINT_H=$GNULIB/$STDINT_H
-fi
-
-
PACKAGE=gdb
cat >>confdefs.h <<_ACEOF
ZW_CREATE_DEPDIR
ZW_PROG_COMPILER_DEPENDENCIES([CC])
-gnulib_extra_configure_args=
-# If large-file support is disabled, make sure gnulib does the same.
-if test "$enable_largefile" = no; then
-gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
-fi
-
-# Configure gnulib. We need to build gnulib under some other
-# directory not "gnulib", to avoid the problem of both GDB and
-# GDBserver wanting to build it in the same directory, when building
-# in the source dir.
-ACX_CONFIGURE_DIR(["gnulib"], ["build-gnulib"],
- ["$gnulib_extra_configure_args"])
-
dnl List of object files and targets accumulated by configure.
CONFIG_OBS=
CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
fi
-GNULIB=build-gnulib/import
-
-# For Makefile dependencies.
-GNULIB_STDINT_H=
-if test x"$STDINT_H" != x; then
- GNULIB_STDINT_H=$GNULIB/$STDINT_H
-fi
-AC_SUBST(GNULIB_STDINT_H)
-
PACKAGE=gdb
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package. ])
AC_SUBST(PACKAGE)
+2019-06-14 Tom Tromey <tom@tromey.com>
+
+ * configure.ac: Use new path to gnulib.
+ * configure: Rebuild.
+ * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
+ to gnulib.
+
2019-06-11 Tom Tromey <tom@tromey.com>
* Makefile.in (SFILES): Add alloc.c.
# gnulib
GNULIB_BUILDDIR = build-gnulib-gdbserver
LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
-INCGNU = -I$(srcdir)/../gnulib/import -I$(GNULIB_BUILDDIR)/import
+INCGNU = -I$(srcdir)/../../gnulib/import -I$(GNULIB_BUILDDIR)/import
# Generated headers in the gnulib directory. These must be listed
# so that they are generated before other files are compiled.
Makefile: Makefile.in config.status
CONFIG_HEADERS="" $(SHELL) ./config.status
-$(GNULIB_BUILDDIR)/Makefile: $(srcdir)/../gnulib/Makefile.in config.status
+$(GNULIB_BUILDDIR)/Makefile: $(srcdir)/../../gnulib/Makefile.in config.status
@cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
CONFIG_COMMANDS="depfiles" \
CONFIG_HEADERS= \
# "gnulib", to avoid the problem of both GDB and GDBserver wanting to
# build it in the same directory, when building in the source dir.
- in_src="../gnulib"
+ in_src="../../gnulib"
in_build="build-gnulib-gdbserver"
in_extra_args="$gnulib_extra_configure_args"
# gdbserver/. We need to build gnulib under some other directory not
# "gnulib", to avoid the problem of both GDB and GDBserver wanting to
# build it in the same directory, when building in the source dir.
-ACX_CONFIGURE_DIR(["../gnulib"], ["build-gnulib-gdbserver"],
+ACX_CONFIGURE_DIR(["../../gnulib"], ["build-gnulib-gdbserver"],
["$gnulib_extra_configure_args"])
ACX_CONFIGURE_DIR(["../../libiberty"], ["build-libiberty-gdbserver"])
--- /dev/null
+2019-06-14 Tom Tromey <tom@tromey.com>
+
+ * update-gnulib.sh: Adjust paths.
+ * Makefile.in: Adjust paths.
+ * configure.ac: Adjust paths. Use ACX_LARGEFILE.
+ * configure: Rebuild.
$(SHELL) config.status --recheck
ACLOCAL = aclocal
-ACLOCAL_AMFLAGS = -I import/m4 -I ../../config
+ACLOCAL_AMFLAGS = -I import/m4 -I ../config
include $(srcdir)/aclocal-m4-deps.mk
MAKEOVERRIDES=
# Disable implicit make rules.
-include $(srcdir)/../disable-implicit-rules.mk
+include $(srcdir)/../gdb/disable-implicit-rules.mk
### end of the libgnu Makefile.in.
--- /dev/null
+This is an import of gnulib that is used by gdb and gdbserver.
+
+To send patches, follow the gdb patch submission instructions in
+../gdb/CONTRIBUTE. For maintainers, see ../gdb/MAINTAINERS.
+
+See update-gnulib.sh for instructions on updating gnulib.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+# po.m4 serial 24 (gettext-0.19)
+dnl Copyright (C) 1995-2014, 2016 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.60])
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+ AC_REQUIRE([AC_PROG_SED])dnl
+ AC_REQUIRE([AM_NLS])dnl
+
+ dnl Release version of the gettext macros. This is used to ensure that
+ dnl the gettext macros and po/Makefile.in.in are in sync.
+ AC_SUBST([GETTEXT_MACRO_VERSION], [0.19])
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
+
+ dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([GMSGFMT_015])
+
+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([XGETTEXT_015])
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+ dnl Installation directories.
+ dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
+ dnl have to define it here, so that it can be used in po/Makefile.
+ test -n "$localedir" || localedir='${datadir}/locale'
+ AC_SUBST([localedir])
+
+ dnl Support for AM_XGETTEXT_OPTION.
+ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+ AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+ AC_CONFIG_COMMANDS([po-directories], [[
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ gt_tab=`printf '\t'`
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done]],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+ # When this code is run, in config.status, two variables have already been
+ # set:
+ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+ # - LINGUAS is the value of the environment variable LINGUAS at configure
+ # time.
+
+changequote(,)dnl
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ # Find a way to echo strings without interpreting backslash.
+ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='echo'
+ else
+ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='printf %s\n'
+ else
+ echo_func () {
+ cat <<EOT
+$*
+EOT
+ }
+ gt_echo='echo_func'
+ fi
+ fi
+
+ # A sed script that extracts the value of VARIABLE from a Makefile.
+ tab=`printf '\t'`
+ sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
+ # Seen the first line of the variable definition.
+ s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
+ ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+ # Set POTFILES to the value of the Makefile variable POTFILES.
+ sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+ # Compute POTFILES_DEPS as
+ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+ POTFILES_DEPS=
+ for file in $POTFILES; do
+ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+ done
+ POMAKEFILEDEPS=""
+
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+ sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+ ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+ fi
+ # Hide the ALL_LINGUAS assignment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ # Compute PROPERTIESFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+ # Compute CLASSFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+ # Compute QMFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+ # Compute MSGFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+ # Compute RESOURCESDLLFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ PROPERTIESFILES=
+ CLASSFILES=
+ QMFILES=
+ MSGFILES=
+ RESOURCESDLLFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+ CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+ QMFILES="$QMFILES $srcdirpre$lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ JAVACATALOGS=
+ QTCATALOGS=
+ TCLCATALOGS=
+ CSHARPCATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+ QTCATALOGS="$QTCATALOGS $lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ fi
+
+ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+ tab=`printf '\t'`
+ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if test -n "$POMAKEFILEDEPS"; then
+ cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+ fi
+ mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+ XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+ AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
+
# Copyright (C) 2002-2017 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2017 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
+m4_include([../config/depstand.m4])
+m4_include([../config/largefile.m4])
+m4_include([../config/lead-dot.m4])
+m4_include([../config/override.m4])
+m4_include([../config/plugins.m4])
m4_include([import/m4/00gnulib.m4])
m4_include([import/m4/absolute-header.m4])
m4_include([import/m4/alloca.m4])
enable_option_checking
enable_maintainer_mode
enable_largefile
+enable_plugins
enable_dependency_tracking
enable_silent_rules
'
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
--disable-largefile omit support for large files
+ --enable-plugins Enable support for plugins
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
} # ac_fn_c_check_header_compile
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
# -------------------------------------------
# Tests whether TYPE exists after having included INCLUDES, setting cache
} # ac_fn_c_check_type
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
# ac_fn_c_check_func LINENO FUNC VAR
# ----------------------------------
# Tests whether FUNC exists, setting the cache variable VAR accordingly
+
+
+
ac_config_headers="$ac_config_headers config.h:config.in"
am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc
-ac_aux_dir=
-for ac_dir in ../.. "$srcdir"/../..; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../.. \"$srcdir\"/../.." "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
$as_echo_n "checking target system type... " >&6; }
if ${ac_cv_target+:} false; then :
NONENONEs,x,x, &&
program_prefix=${target_alias}-
+# The tests for host and target for $enable_largefile require
+# canonical names.
+
+
+
+# As the $enable_largefile decision depends on --enable-plugins we must set it
+# even in directories otherwise not depending on the $plugins option.
+
+
+ maybe_plugins=no
+ for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+ maybe_plugins=yes
+fi
+
+done
+
+ for ac_header in windows.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "windows.h" "ac_cv_header_windows_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_windows_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_WINDOWS_H 1
+_ACEOF
+ maybe_plugins=yes
+fi
+
+done
+
+
+ # Check whether --enable-plugins was given.
+if test "${enable_plugins+set}" = set; then :
+ enableval=$enable_plugins; case "${enableval}" in
+ no) plugins=no ;;
+ *) plugins=yes
+ if test "$maybe_plugins" != "yes" ; then
+ as_fn_error $? "Building with plugin support requires a host that supports dlopen." "$LINENO" 5
+ fi ;;
+ esac
+else
+ plugins=$maybe_plugins
+
+fi
+
+ if test "$plugins" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlsym" >&5
+$as_echo_n "checking for library containing dlsym... " >&6; }
+if ${ac_cv_search_dlsym+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlsym ();
+int
+main ()
+{
+return dlsym ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_dlsym=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if ${ac_cv_search_dlsym+:} false; then :
+ break
+fi
+done
+if ${ac_cv_search_dlsym+:} false; then :
+
+else
+ ac_cv_search_dlsym=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlsym" >&5
+$as_echo "$ac_cv_search_dlsym" >&6; }
+ac_res=$ac_cv_search_dlsym
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+ fi
+
+
+case "${host}" in
+ sparc-*-solaris*|i[3-7]86-*-solaris*)
+ # On native 32bit sparc and ia32 solaris, large-file and procfs support
+ # are mutually exclusive; and without procfs support, the bfd/ elf module
+ # cannot provide certain routines such as elfcore_write_prpsinfo
+ # or elfcore_write_prstatus. So unless the user explicitly requested
+ # large-file support through the --enable-largefile switch, disable
+ # large-file support in favor of procfs support.
+ test "${target}" = "${host}" -a "x$plugins" = xno \
+ && : ${enable_largefile="no"}
+ ;;
+esac
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ if ac_fn_c_try_compile "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ fi
+
+
+$as_echo "#define _DARWIN_USE_64_BIT_INODE 1" >>confdefs.h
+
+fi
+
+
+
+ac_aux_dir=
+for ac_dir in .. "$srcdir"/..; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in .. \"$srcdir\"/.." "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+
fi
+ XGETTEXT_EXTRA_OPTIONS=
+
+
fi
+ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS --flag=error:3:c-format"
+
+
+
+ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS --flag=error_at_line:5:c-format"
+
+
gl_EARLY
AM_PROG_CC_STDC
-AC_CONFIG_AUX_DIR(../..)
+ACX_LARGEFILE
+
+AC_CONFIG_AUX_DIR(..)
AC_CANONICAL_SYSTEM
gl_INIT
apply_patches "patches/0002-mkostemp-mkostemps-Fix-compilation-error-in-C-mode-o.patch"
# Regenerate all necessary files...
-aclocal -Iimport/m4 &&
+aclocal -Iimport/m4 -I../config &&
autoconf &&
autoheader &&
automake
projects / thirdparty / binutils-gdb.git / commitdiff
