]> git.ipfire.org Git - thirdparty/binutils-gdb.git/commitdiff
Add install-strip target to gdbserver
authorHannes Domani <ssbssa@yahoo.de>
Fri, 24 Jan 2020 14:03:14 +0000 (15:03 +0100)
committerHannes Domani <ssbssa@yahoo.de>
Fri, 24 Jan 2020 18:18:28 +0000 (19:18 +0100)
So far this was only possible indirectly when invoked from the gdb directory.
This makes the install-strip target independent from gdb.

2020-01-24  Hannes Domani  <ssbssa@yahoo.de>

* Makefile.in (install-strip): New target.
(install_sh, INSTALL_STRIP_PROGRAM, STRIP): New variables.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* configure.ac: Add AM_PROG_INSTALL_STRIP.

gdb/gdbserver/ChangeLog
gdb/gdbserver/Makefile.in
gdb/gdbserver/aclocal.m4
gdb/gdbserver/configure
gdb/gdbserver/configure.ac

index 5f1e08611a5f21fbb9ecff1d02cbf2fa539adc1b..aeb9cb6c77805e3b366ad557a6bfdee695487de4 100644 (file)
@@ -1,3 +1,11 @@
+2020-01-24  Hannes Domani  <ssbssa@yahoo.de>
+
+       * Makefile.in (install-strip): New target.
+       (install_sh, INSTALL_STRIP_PROGRAM, STRIP): New variables.
+       * aclocal.m4: Regenerate.
+       * configure: Regenerate.
+       * configure.ac: Add AM_PROG_INSTALL_STRIP.
+
 2020-01-24  Maciej W. Rozycki  <macro@wdc.com>
 
        * Makefile.in (SFILES): Adjust paths to point to real files.
index d8cd5058267b95b134d3102f843f62e48b1d4eab..3922b5231c428d3fb993ef4cb68c87b6e80e4949 100644 (file)
@@ -45,11 +45,14 @@ htmldir = $(prefix)/html
 includedir = @includedir@
 CONFIG_SRC_SUBDIR = @CONFIG_SRC_SUBDIR@
 
+install_sh = @install_sh@
+
 SHELL = @SHELL@
 EXEEXT = @EXEEXT@
 
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 RANLIB = @RANLIB@
 
@@ -58,6 +61,7 @@ CXX = @CXX@
 CXX_DIALECT = @CXX_DIALECT@
 AR = @AR@
 AR_FLAGS = rc
+STRIP = @STRIP@
 
 # Dependency tracking information.
 DEPMODE = @CCDEPMODE@
@@ -394,6 +398,12 @@ install-only:
        # in libiberty.
        @$(MAKE) $(FLAGS_TO_PASS) DO=install "DODIRS=$(SUBDIRS)" subdir_do
 
+install-strip:
+       $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+         `test -z '$(STRIP)' || \
+           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
+
 uninstall: force
        n=`echo gdbserver | sed '$(program_transform_name)'`; \
        if [ x$$n = x ]; then n=gdbserver; else true; fi; \
index 34e00c9cb50cf9f96cc2a94ded96fff740028efd..110b416e61561930fa4e4a01eb23873cc6339d85 100644 (file)
 # PARTICULAR PURPOSE.
 
 m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
 # Copyright (C) 1997-2017 Free Software Foundation, Inc.
@@ -45,6 +97,27 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\    *)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
@@ -81,6 +154,34 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
 ]
 )
 
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
 # Copyright (C) 2006-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
index 169edf70c961b3485f6782d3952d8bce7f5b7ba3..94f2bedf684706c400396588f30ebb08ee919308 100755 (executable)
@@ -671,6 +671,9 @@ build_os
 build_vendor
 build_cpu
 build
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
 EGREP
 GREP
 CPP
@@ -4428,7 +4431,6 @@ rm -rf conftest*
 
 fi
 
-
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
   if test -f "$ac_dir/install-sh"; then
@@ -4458,6 +4460,119 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
 ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\    *)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
   as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
index 0654cb43b7790f8af5d83635631843962223d889..03b36dc699aceb017f7c91b02ed2341610612b83 100644 (file)
@@ -27,6 +27,7 @@ AC_PROG_CC
 AC_PROG_CXX
 AC_GNU_SOURCE
 AC_SYS_LARGEFILE
+AM_PROG_INSTALL_STRIP
 
 AC_CANONICAL_SYSTEM