Makefile.in

   1 # Makefile.in generated by automake 1.16.5 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2021 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 VPATH = @srcdir@
  18 am__is_gnu_make = { \
  19   if test -z '$(MAKELEVEL)'; then \
  20     false; \
  21   elif test -n '$(MAKE_HOST)'; then \
  22     true; \
  23   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  24     true; \
  25   else \
  26     false; \
  27   fi; \
  28 }
  29 am__make_running_with_option = \
  30   case $${target_option-} in \
  31       ?) ;; \
  32       *) echo "am__make_running_with_option: internal error: invalid" \
  33               "target option '$${target_option-}' specified" >&2; \
  34          exit 1;; \
  35   esac; \
  36   has_opt=no; \
  37   sane_makeflags=$$MAKEFLAGS; \
  38   if $(am__is_gnu_make); then \
  39     sane_makeflags=$$MFLAGS; \
  40   else \
  41     case $$MAKEFLAGS in \
  42       *\\[\ \   ]*) \
  43         bs=\\; \
  44         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  45           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  46     esac; \
  47   fi; \
  48   skip_next=no; \
  49   strip_trailopt () \
  50   { \
  51     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  52   }; \
  53   for flg in $$sane_makeflags; do \
  54     test $$skip_next = yes && { skip_next=no; continue; }; \
  55     case $$flg in \
  56       *=*|--*) continue;; \
  57         -*I) strip_trailopt 'I'; skip_next=yes;; \
  58       -*I?*) strip_trailopt 'I';; \
  59         -*O) strip_trailopt 'O'; skip_next=yes;; \
  60       -*O?*) strip_trailopt 'O';; \
  61         -*l) strip_trailopt 'l'; skip_next=yes;; \
  62       -*l?*) strip_trailopt 'l';; \
  63       -[dEDm]) skip_next=yes;; \
  64       -[JT]) skip_next=yes;; \
  65     esac; \
  66     case $$flg in \
  67       *$$target_option*) has_opt=yes; break;; \
  68     esac; \
  69   done; \
  70   test $$has_opt = yes
  71 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  72 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  73 pkgdatadir = $(datadir)/@PACKAGE@
  74 pkgincludedir = $(includedir)/@PACKAGE@
  75 pkglibdir = $(libdir)/@PACKAGE@
  76 pkglibexecdir = $(libexecdir)/@PACKAGE@
  77 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  78 install_sh_DATA = $(install_sh) -c -m 644
  79 install_sh_PROGRAM = $(install_sh) -c
  80 install_sh_SCRIPT = $(install_sh) -c
  81 INSTALL_HEADER = $(INSTALL_DATA)
  82 transform = $(program_transform_name)
  83 NORMAL_INSTALL = :
  84 PRE_INSTALL = :
  85 POST_INSTALL = :
  86 NORMAL_UNINSTALL = :
  87 PRE_UNINSTALL = :
  88 POST_UNINSTALL = :
  89 build_triplet = @build@
  90 host_triplet = @host@
  91 @HAVE_BINDDIR_TRUE@am__append_1 = bind/Makefile.in bind/bind.tar.gz bind/version.tmp
  92 subdir = .
  93 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  94 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  95 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  96         $(ACLOCAL_M4)
  97 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
  98         $(am__configure_deps) $(nobase_include_HEADERS) \
  99         $(am__DIST_COMMON)
 100 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 101  configure.lineno config.status.lineno
 102 mkinstalldirs = $(install_sh) -d
 103 CONFIG_HEADER = $(top_builddir)/includes/config.h
 104 CONFIG_CLEAN_FILES = doc/devel/doxyfile
 105 CONFIG_CLEAN_VPATH_FILES =
 106 AM_V_P = $(am__v_P_@AM_V@)
 107 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 108 am__v_P_0 = false
 109 am__v_P_1 = :
 110 AM_V_GEN = $(am__v_GEN_@AM_V@)
 111 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 112 am__v_GEN_0 = @echo "  GEN     " $@;
 113 am__v_GEN_1 =
 114 AM_V_at = $(am__v_at_@AM_V@)
 115 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 116 am__v_at_0 = @
 117 am__v_at_1 =
 118 SOURCES =
 119 DIST_SOURCES =
 120 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 121         ctags-recursive dvi-recursive html-recursive info-recursive \
 122         install-data-recursive install-dvi-recursive \
 123         install-exec-recursive install-html-recursive \
 124         install-info-recursive install-pdf-recursive \
 125         install-ps-recursive install-recursive installcheck-recursive \
 126         installdirs-recursive pdf-recursive ps-recursive \
 127         tags-recursive uninstall-recursive
 128 am__can_run_installinfo = \
 129   case $$AM_UPDATE_INFO_DIR in \
 130     n|no|NO) false;; \
 131     *) (install-info --version) >/dev/null 2>&1;; \
 132   esac
 133 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 134 am__vpath_adj = case $$p in \
 135     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 136     *) f=$$p;; \
 137   esac;
 138 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 139 am__install_max = 40
 140 am__nobase_strip_setup = \
 141   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 142 am__nobase_strip = \
 143   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 144 am__nobase_list = $(am__nobase_strip_setup); \
 145   for p in $$list; do echo "$$p $$p"; done | \
 146   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 147   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 148     if (++n[$$2] == $(am__install_max)) \
 149       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 150     END { for (dir in files) print dir, files[dir] }'
 151 am__base_list = \
 152   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 153   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 154 am__uninstall_files_from_dir = { \
 155   test -z "$$files" \
 156     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 157     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 158          $(am__cd) "$$dir" && rm -f $$files; }; \
 159   }
 160 am__installdirs = "$(DESTDIR)$(includedir)"
 161 HEADERS = $(nobase_include_HEADERS)
 162 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 163   distclean-recursive maintainer-clean-recursive
 164 am__recursive_targets = \
 165   $(RECURSIVE_TARGETS) \
 166   $(RECURSIVE_CLEAN_TARGETS) \
 167   $(am__extra_recursive_targets)
 168 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 169         cscope distdir distdir-am dist dist-all distcheck
 170 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 171 # Read a list of newline-separated strings from the standard input,
 172 # and print each of them once, without duplicates.  Input order is
 173 # *not* preserved.
 174 am__uniquify_input = $(AWK) '\
 175   BEGIN { nonempty = 0; } \
 176   { items[$$0] = 1; nonempty = 1; } \
 177   END { if (nonempty) { for (i in items) print i; }; } \
 178 '
 179 # Make sure the list of sources is unique.  This is necessary because,
 180 # e.g., the same source file might be shared among _SOURCES variables
 181 # for different programs/libraries.
 182 am__define_uniq_tagged_files = \
 183   list='$(am__tagged_files)'; \
 184   unique=`for i in $$list; do \
 185     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 186   done | $(am__uniquify_input)`
 187 am__DIST_COMMON = $(srcdir)/Makefile.in \
 188         $(top_srcdir)/doc/devel/doxyfile.in README compile \
 189         config.guess config.sub depcomp install-sh missing
 190 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 191 distdir = $(PACKAGE)-$(VERSION)
 192 top_distdir = $(distdir)
 193 am__remove_distdir = \
 194   if test -d "$(distdir)"; then \
 195     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 196       && rm -rf "$(distdir)" \
 197       || { sleep 5 && rm -rf "$(distdir)"; }; \
 198   else :; fi
 199 am__post_remove_distdir = $(am__remove_distdir)
 200 am__relativize = \
 201   dir0=`pwd`; \
 202   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 203   sed_rest='s,^[^/]*/*,,'; \
 204   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 205   sed_butlast='s,/*[^/]*$$,,'; \
 206   while test -n "$$dir1"; do \
 207     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 208     if test "$$first" != "."; then \
 209       if test "$$first" = ".."; then \
 210         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 211         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 212       else \
 213         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 214         if test "$$first2" = "$$first"; then \
 215           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 216         else \
 217           dir2="../$$dir2"; \
 218         fi; \
 219         dir0="$$dir0"/"$$first"; \
 220       fi; \
 221     fi; \
 222     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 223   done; \
 224   reldir="$$dir2"
 225 DIST_ARCHIVES = $(distdir).tar.gz
 226 GZIP_ENV = --best
 227 DIST_TARGETS = dist-gzip
 228 # Exists only to be overridden by the user if desired.
 229 AM_DISTCHECK_DVI_TARGET = dvi
 230 distuninstallcheck_listfiles = find . -type f -print
 231 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 232   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 233 distcleancheck_listfiles = find . -type f -print
 234 A = @A@
 235 ACLOCAL = @ACLOCAL@
 236 AMTAR = @AMTAR@
 237 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 238 AR = @AR@
 239 ATF_BIN = @ATF_BIN@
 240 ATF_CFLAGS = @ATF_CFLAGS@
 241 ATF_LDFLAGS = @ATF_LDFLAGS@
 242 AUTOCONF = @AUTOCONF@
 243 AUTOHEADER = @AUTOHEADER@
 244 AUTOMAKE = @AUTOMAKE@
 245 AWK = @AWK@
 246 BINDCONFIG = @BINDCONFIG@
 247 BINDDIR = @BINDDIR@
 248 BINDIOMUX = @BINDIOMUX@
 249 BINDLIBDNSDIR = @BINDLIBDNSDIR@
 250 BINDLIBIRSDIR = @BINDLIBIRSDIR@
 251 BINDLIBISCCFGDIR = @BINDLIBISCCFGDIR@
 252 BINDLIBISCDIR = @BINDLIBISCDIR@
 253 BINDLT = @BINDLT@
 254 BINDSRCDIR = @BINDSRCDIR@
 255 BINDSUBDIR = @BINDSUBDIR@
 256 CC = @CC@
 257 CCDEPMODE = @CCDEPMODE@
 258 CFLAGS = @CFLAGS@
 259 CPP = @CPP@
 260 CPPFLAGS = @CPPFLAGS@
 261 CSCOPE = @CSCOPE@
 262 CTAGS = @CTAGS@
 263 CYGPATH_W = @CYGPATH_W@
 264 DEFS = @DEFS@
 265 DEPDIR = @DEPDIR@
 266 DHLIBS = @DHLIBS@
 267 DISTCHECK_ATF_CONFIGURE_FLAG = @DISTCHECK_ATF_CONFIGURE_FLAG@
 268 DISTCHECK_LIBBIND_CONFIGURE_FLAG = @DISTCHECK_LIBBIND_CONFIGURE_FLAG@
 269 DISTCHECK_LIBTOOL_CONFIGURE_FLAG = @DISTCHECK_LIBTOOL_CONFIGURE_FLAG@
 270 ECHO_C = @ECHO_C@
 271 ECHO_N = @ECHO_N@
 272 ECHO_T = @ECHO_T@
 273 EGREP = @EGREP@
 274 ETAGS = @ETAGS@
 275 EXEEXT = @EXEEXT@
 276 GREP = @GREP@
 277 INSTALL = @INSTALL@
 278 INSTALL_DATA = @INSTALL_DATA@
 279 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 280 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 281 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 282 LDAP_CFLAGS = @LDAP_CFLAGS@
 283 LDAP_LIBS = @LDAP_LIBS@
 284 LDFLAGS = @LDFLAGS@
 285 LIBOBJS = @LIBOBJS@
 286 LIBS = @LIBS@
 287 LTLIBOBJS = @LTLIBOBJS@
 288 MAINT = @MAINT@
 289 MAKEINFO = @MAKEINFO@
 290 MKDIR_P = @MKDIR_P@
 291 OBJEXT = @OBJEXT@
 292 PACKAGE = @PACKAGE@
 293 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 294 PACKAGE_NAME = @PACKAGE_NAME@
 295 PACKAGE_STRING = @PACKAGE_STRING@
 296 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 297 PACKAGE_URL = @PACKAGE_URL@
 298 PACKAGE_VERSION = @PACKAGE_VERSION@
 299 PATH_SEPARATOR = @PATH_SEPARATOR@
 300 Q = @Q@
 301 RANLIB = @RANLIB@
 302 SET_MAKE = @SET_MAKE@
 303 SHELL = @SHELL@
 304 STRIP = @STRIP@
 305 UNITTESTS = @UNITTESTS@
 306 VERSION = @VERSION@
 307 abs_builddir = @abs_builddir@
 308 abs_srcdir = @abs_srcdir@
 309 abs_top_builddir = @abs_top_builddir@
 310 abs_top_srcdir = @abs_top_srcdir@
 311 ac_ct_CC = @ac_ct_CC@
 312 ac_prefix_program = @ac_prefix_program@
 313 am__include = @am__include@
 314 am__leading_dot = @am__leading_dot@
 315 am__quote = @am__quote@
 316 am__tar = @am__tar@
 317 am__untar = @am__untar@
 318 bindir = @bindir@
 319 build = @build@
 320 build_alias = @build_alias@
 321 build_cpu = @build_cpu@
 322 build_os = @build_os@
 323 build_vendor = @build_vendor@
 324 builddir = @builddir@
 325 byte_order = @byte_order@
 326 datadir = @datadir@
 327 datarootdir = @datarootdir@
 328 docdir = @docdir@
 329 dvidir = @dvidir@
 330 exec_prefix = @exec_prefix@
 331 host = @host@
 332 host_alias = @host_alias@
 333 host_cpu = @host_cpu@
 334 host_os = @host_os@
 335 host_vendor = @host_vendor@
 336 htmldir = @htmldir@
 337 includedir = @includedir@
 338 infodir = @infodir@
 339 install_sh = @install_sh@
 340 libdir = @libdir@
 341 libexecdir = @libexecdir@
 342 localedir = @localedir@
 343 localstatedir = @localstatedir@
 344 mandir = @mandir@
 345 mkdir_p = @mkdir_p@
 346 oldincludedir = @oldincludedir@
 347 pdfdir = @pdfdir@
 348 pkgcfg_found = @pkgcfg_found@
 349 prefix = @prefix@
 350 program_transform_name = @program_transform_name@
 351 psdir = @psdir@
 352 sbindir = @sbindir@
 353 sharedstatedir = @sharedstatedir@
 354 srcdir = @srcdir@
 355 sysconfdir = @sysconfdir@
 356 target_alias = @target_alias@
 357 top_build_prefix = @top_build_prefix@
 358 top_builddir = @top_builddir@
 359 top_srcdir = @top_srcdir@
 360
 361 #
 362 # for libtool
 363 #
 364 ACLOCAL_AMFLAGS = -I m4
 365
 366 #
 367 # We have a lot of files that we want shipped with the distribution.
 368 #
 369 EXTRA_DIST = RELNOTES LICENSE configure.ac+lt config+lt \
 370         contrib/3.0b1-lease-convert contrib/dhclient-tz-exithook.sh \
 371         contrib/dhcp.spec contrib/sethostname.sh contrib/solaris.init \
 372         contrib/ms2isc/Registry.pm contrib/ms2isc/ms2isc.pl \
 373         contrib/ms2isc/readme.txt contrib/ldap/dhcpd-conf-to-ldap \
 374         contrib/ldap/dhcp.schema contrib/ldap/README.ldap \
 375         contrib/dhcp-lease-list.pl doc/BIND-libraries \
 376         doc/DHCPv4-over-DHCPv6 doc/IANA-arp-parameters doc/Makefile \
 377         doc/References.html doc/References.txt doc/References.xml \
 378         doc/api+protocol doc/ja_JP.eucJP/dhclient-script.8 \
 379         doc/ja_JP.eucJP/dhclient.8 doc/ja_JP.eucJP/dhclient.conf.5 \
 380         doc/ja_JP.eucJP/dhclient.leases.5 doc/ja_JP.eucJP/dhcp-eval.5 \
 381         doc/ja_JP.eucJP/dhcp-options.5 \
 382         doc/examples/dhclient-dhcpv6.conf \
 383         doc/examples/dhcpd-dhcpv6.conf doc/devel/arch.dox \
 384         doc/devel/atf.dox doc/devel/contrib.dox doc/devel/debug.dox \
 385         doc/devel/isc-logo.jpg doc/devel/libtool.dox \
 386         doc/devel/mainpage.dox doc/devel/omapi.dox doc/devel/qa.dox \
 387         client/tests/Atffile common/tests/Atffile server/tests/Atffile \
 388         client/tests/Kyuafile common/tests/Kyuafile \
 389         server/tests/Kyuafile m4/README CONTRIBUTING.md \
 390         $(am__append_1)
 391
 392 # Use an autoconf substitution vs an automake conditional here
 393 # to fool automake when the bind directory does not exist.
 394 SUBDIRS = @BINDSUBDIR@ includes tests common omapip client dhcpctl relay server
 395 DIST_SUBDIRS = $(SUBDIRS) keama
 396 nobase_include_HEADERS = dhcpctl/dhcpctl.h
 397
 398 #
 399 # distcheck tuning
 400 #
 401 DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_ATF_CONFIGURE_FLAG@ \
 402         @DISTCHECK_LIBBIND_CONFIGURE_FLAG@ \
 403         @DISTCHECK_LIBTOOL_CONFIGURE_FLAG@ $(am__empty)
 404 all: all-recursive
 405
 406 .SUFFIXES:
 407 am--refresh: Makefile
 408         @:
 409 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 410         @for dep in $?; do \
 411           case '$(am__configure_deps)' in \
 412             *$$dep*) \
 413               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 414               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 415                 && exit 0; \
 416               exit 1;; \
 417           esac; \
 418         done; \
 419         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 420         $(am__cd) $(top_srcdir) && \
 421           $(AUTOMAKE) --foreign Makefile
 422
 423 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 424         $(SHELL) ./config.status --recheck
 425
 426 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 427         $(am__cd) $(srcdir) && $(AUTOCONF)
 428 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 429         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 430 $(am__aclocal_m4_deps):
 431 doc/devel/doxyfile: $(top_builddir)/config.status $(top_srcdir)/doc/devel/doxyfile.in
 432         cd $(top_builddir) && $(SHELL) ./config.status $@
 433 install-nobase_includeHEADERS: $(nobase_include_HEADERS)
 434         @$(NORMAL_INSTALL)
 435         @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
 436         if test -n "$$list"; then \
 437           echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
 438           $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
 439         fi; \
 440         $(am__nobase_list) | while read dir files; do \
 441           xfiles=; for file in $$files; do \
 442             if test -f "$$file"; then xfiles="$$xfiles $$file"; \
 443             else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
 444           test -z "$$xfiles" || { \
 445             test "x$$dir" = x. || { \
 446               echo " $(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \
 447               $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \
 448             echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \
 449             $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \
 450         done
 451
 452 uninstall-nobase_includeHEADERS:
 453         @$(NORMAL_UNINSTALL)
 454         @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
 455         $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
 456         dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
 457
 458 # This directory's subdirectories are mostly independent; you can cd
 459 # into them and run 'make' without going through this Makefile.
 460 # To change the values of 'make' variables: instead of editing Makefiles,
 461 # (1) if the variable is set in 'config.status', edit 'config.status'
 462 #     (which will cause the Makefiles to be regenerated when you run 'make');
 463 # (2) otherwise, pass the desired values on the 'make' command line.
 464 $(am__recursive_targets):
 465         @fail=; \
 466         if $(am__make_keepgoing); then \
 467           failcom='fail=yes'; \
 468         else \
 469           failcom='exit 1'; \
 470         fi; \
 471         dot_seen=no; \
 472         target=`echo $@ | sed s/-recursive//`; \
 473         case "$@" in \
 474           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 475           *) list='$(SUBDIRS)' ;; \
 476         esac; \
 477         for subdir in $$list; do \
 478           echo "Making $$target in $$subdir"; \
 479           if test "$$subdir" = "."; then \
 480             dot_seen=yes; \
 481             local_target="$$target-am"; \
 482           else \
 483             local_target="$$target"; \
 484           fi; \
 485           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 486           || eval $$failcom; \
 487         done; \
 488         if test "$$dot_seen" = "no"; then \
 489           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 490         fi; test -z "$$fail"
 491
 492 ID: $(am__tagged_files)
 493         $(am__define_uniq_tagged_files); mkid -fID $$unique
 494 tags: tags-recursive
 495 TAGS: tags
 496
 497 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 498         set x; \
 499         here=`pwd`; \
 500         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 501           include_option=--etags-include; \
 502           empty_fix=.; \
 503         else \
 504           include_option=--include; \
 505           empty_fix=; \
 506         fi; \
 507         list='$(SUBDIRS)'; for subdir in $$list; do \
 508           if test "$$subdir" = .; then :; else \
 509             test ! -f $$subdir/TAGS || \
 510               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 511           fi; \
 512         done; \
 513         $(am__define_uniq_tagged_files); \
 514         shift; \
 515         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 516           test -n "$$unique" || unique=$$empty_fix; \
 517           if test $$# -gt 0; then \
 518             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 519               "$$@" $$unique; \
 520           else \
 521             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 522               $$unique; \
 523           fi; \
 524         fi
 525 ctags: ctags-recursive
 526
 527 CTAGS: ctags
 528 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 529         $(am__define_uniq_tagged_files); \
 530         test -z "$(CTAGS_ARGS)$$unique" \
 531           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 532              $$unique
 533
 534 GTAGS:
 535         here=`$(am__cd) $(top_builddir) && pwd` \
 536           && $(am__cd) $(top_srcdir) \
 537           && gtags -i $(GTAGS_ARGS) "$$here"
 538 cscope: cscope.files
 539         test ! -s cscope.files \
 540           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 541 clean-cscope:
 542         -rm -f cscope.files
 543 cscope.files: clean-cscope cscopelist
 544 cscopelist: cscopelist-recursive
 545
 546 cscopelist-am: $(am__tagged_files)
 547         list='$(am__tagged_files)'; \
 548         case "$(srcdir)" in \
 549           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 550           *) sdir=$(subdir)/$(srcdir) ;; \
 551         esac; \
 552         for i in $$list; do \
 553           if test -f "$$i"; then \
 554             echo "$(subdir)/$$i"; \
 555           else \
 556             echo "$$sdir/$$i"; \
 557           fi; \
 558         done >> $(top_builddir)/cscope.files
 559
 560 distclean-tags:
 561         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 562         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 563 distdir: $(BUILT_SOURCES)
 564         $(MAKE) $(AM_MAKEFLAGS) distdir-am
 565
 566 distdir-am: $(DISTFILES)
 567         $(am__remove_distdir)
 568         test -d "$(distdir)" || mkdir "$(distdir)"
 569         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 570         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 571         list='$(DISTFILES)'; \
 572           dist_files=`for file in $$list; do echo $$file; done | \
 573           sed -e "s|^$$srcdirstrip/||;t" \
 574               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 575         case $$dist_files in \
 576           */*) $(MKDIR_P) `echo "$$dist_files" | \
 577                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 578                            sort -u` ;; \
 579         esac; \
 580         for file in $$dist_files; do \
 581           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 582           if test -d $$d/$$file; then \
 583             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 584             if test -d "$(distdir)/$$file"; then \
 585               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 586             fi; \
 587             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 588               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 589               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 590             fi; \
 591             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 592           else \
 593             test -f "$(distdir)/$$file" \
 594             || cp -p $$d/$$file "$(distdir)/$$file" \
 595             || exit 1; \
 596           fi; \
 597         done
 598         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 599           if test "$$subdir" = .; then :; else \
 600             $(am__make_dryrun) \
 601               || test -d "$(distdir)/$$subdir" \
 602               || $(MKDIR_P) "$(distdir)/$$subdir" \
 603               || exit 1; \
 604             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 605             $(am__relativize); \
 606             new_distdir=$$reldir; \
 607             dir1=$$subdir; dir2="$(top_distdir)"; \
 608             $(am__relativize); \
 609             new_top_distdir=$$reldir; \
 610             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 611             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 612             ($(am__cd) $$subdir && \
 613               $(MAKE) $(AM_MAKEFLAGS) \
 614                 top_distdir="$$new_top_distdir" \
 615                 distdir="$$new_distdir" \
 616                 am__remove_distdir=: \
 617                 am__skip_length_check=: \
 618                 am__skip_mode_fix=: \
 619                 distdir) \
 620               || exit 1; \
 621           fi; \
 622         done
 623         -test -n "$(am__skip_mode_fix)" \
 624         || find "$(distdir)" -type d ! -perm -755 \
 625                 -exec chmod u+rwx,go+rx {} \; -o \
 626           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 627           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 628           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 629         || chmod -R a+r "$(distdir)"
 630 dist-gzip: distdir
 631         tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
 632         $(am__post_remove_distdir)
 633
 634 dist-bzip2: distdir
 635         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 636         $(am__post_remove_distdir)
 637
 638 dist-lzip: distdir
 639         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 640         $(am__post_remove_distdir)
 641
 642 dist-xz: distdir
 643         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 644         $(am__post_remove_distdir)
 645
 646 dist-zstd: distdir
 647         tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
 648         $(am__post_remove_distdir)
 649
 650 dist-tarZ: distdir
 651         @echo WARNING: "Support for distribution archives compressed with" \
 652                        "legacy program 'compress' is deprecated." >&2
 653         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 654         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 655         $(am__post_remove_distdir)
 656
 657 dist-shar: distdir
 658         @echo WARNING: "Support for shar distribution archives is" \
 659                        "deprecated." >&2
 660         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 661         shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
 662         $(am__post_remove_distdir)
 663
 664 dist-zip: distdir
 665         -rm -f $(distdir).zip
 666         zip -rq $(distdir).zip $(distdir)
 667         $(am__post_remove_distdir)
 668
 669 dist dist-all:
 670         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 671         $(am__post_remove_distdir)
 672
 673 # This target untars the dist file and tries a VPATH configuration.  Then
 674 # it guarantees that the distribution is self-contained by making another
 675 # tarfile.
 676 distcheck: dist
 677         case '$(DIST_ARCHIVES)' in \
 678         *.tar.gz*) \
 679           eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
 680         *.tar.bz2*) \
 681           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 682         *.tar.lz*) \
 683           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 684         *.tar.xz*) \
 685           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 686         *.tar.Z*) \
 687           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 688         *.shar.gz*) \
 689           eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 690         *.zip*) \
 691           unzip $(distdir).zip ;;\
 692         *.tar.zst*) \
 693           zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
 694         esac
 695         chmod -R a-w $(distdir)
 696         chmod u+w $(distdir)
 697         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 698         chmod a-w $(distdir)
 699         test -d $(distdir)/_build || exit 0; \
 700         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 701           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 702           && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
 703           && am__cwd=`pwd` \
 704           && $(am__cd) $(distdir)/_build/sub \
 705           && ../../configure \
 706             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 707             $(DISTCHECK_CONFIGURE_FLAGS) \
 708             --srcdir=../.. --prefix="$$dc_install_base" \
 709           && $(MAKE) $(AM_MAKEFLAGS) \
 710           && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
 711           && $(MAKE) $(AM_MAKEFLAGS) check \
 712           && $(MAKE) $(AM_MAKEFLAGS) install \
 713           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 714           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 715           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 716                 distuninstallcheck \
 717           && chmod -R a-w "$$dc_install_base" \
 718           && ({ \
 719                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 720                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 721                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 722                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 723                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 724               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 725           && rm -rf "$$dc_destdir" \
 726           && $(MAKE) $(AM_MAKEFLAGS) dist \
 727           && rm -rf $(DIST_ARCHIVES) \
 728           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 729           && cd "$$am__cwd" \
 730           || exit 1
 731         $(am__post_remove_distdir)
 732         @(echo "$(distdir) archives ready for distribution: "; \
 733           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 734           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 735 distuninstallcheck:
 736         @test -n '$(distuninstallcheck_dir)' || { \
 737           echo 'ERROR: trying to run $@ with an empty' \
 738                '$$(distuninstallcheck_dir)' >&2; \
 739           exit 1; \
 740         }; \
 741         $(am__cd) '$(distuninstallcheck_dir)' || { \
 742           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 743           exit 1; \
 744         }; \
 745         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 746            || { echo "ERROR: files left after uninstall:" ; \
 747                 if test -n "$(DESTDIR)"; then \
 748                   echo "  (check DESTDIR support)"; \
 749                 fi ; \
 750                 $(distuninstallcheck_listfiles) ; \
 751                 exit 1; } >&2
 752 distcleancheck: distclean
 753         @if test '$(srcdir)' = . ; then \
 754           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 755           exit 1 ; \
 756         fi
 757         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 758           || { echo "ERROR: files left in build directory after distclean:" ; \
 759                $(distcleancheck_listfiles) ; \
 760                exit 1; } >&2
 761 check-am: all-am
 762 check: check-recursive
 763 all-am: Makefile $(HEADERS)
 764 installdirs: installdirs-recursive
 765 installdirs-am:
 766         for dir in "$(DESTDIR)$(includedir)"; do \
 767           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 768         done
 769 install: install-recursive
 770 install-exec: install-exec-recursive
 771 install-data: install-data-recursive
 772 uninstall: uninstall-recursive
 773
 774 install-am: all-am
 775         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 776
 777 installcheck: installcheck-recursive
 778 install-strip:
 779         if test -z '$(STRIP)'; then \
 780           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 781             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 782               install; \
 783         else \
 784           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 785             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 786             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 787         fi
 788 mostlyclean-generic:
 789
 790 clean-generic:
 791
 792 distclean-generic:
 793         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 794         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 795
 796 maintainer-clean-generic:
 797         @echo "This command is intended for maintainers to use"
 798         @echo "it deletes files that may require special tools to rebuild."
 799 clean: clean-recursive
 800
 801 clean-am: clean-generic mostlyclean-am
 802
 803 distclean: distclean-recursive
 804         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 805         -rm -f Makefile
 806 distclean-am: clean-am distclean-generic distclean-local \
 807         distclean-tags
 808
 809 dvi: dvi-recursive
 810
 811 dvi-am:
 812
 813 html: html-recursive
 814
 815 html-am:
 816
 817 info: info-recursive
 818
 819 info-am:
 820
 821 install-data-am: install-nobase_includeHEADERS
 822
 823 install-dvi: install-dvi-recursive
 824
 825 install-dvi-am:
 826
 827 install-exec-am:
 828
 829 install-html: install-html-recursive
 830
 831 install-html-am:
 832
 833 install-info: install-info-recursive
 834
 835 install-info-am:
 836
 837 install-man:
 838
 839 install-pdf: install-pdf-recursive
 840
 841 install-pdf-am:
 842
 843 install-ps: install-ps-recursive
 844
 845 install-ps-am:
 846
 847 installcheck-am:
 848
 849 maintainer-clean: maintainer-clean-recursive
 850         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 851         -rm -rf $(top_srcdir)/autom4te.cache
 852         -rm -f Makefile
 853 maintainer-clean-am: distclean-am maintainer-clean-generic
 854
 855 mostlyclean: mostlyclean-recursive
 856
 857 mostlyclean-am: mostlyclean-generic
 858
 859 pdf: pdf-recursive
 860
 861 pdf-am:
 862
 863 ps: ps-recursive
 864
 865 ps-am:
 866
 867 uninstall-am: uninstall-nobase_includeHEADERS
 868
 869 .MAKE: $(am__recursive_targets) install-am install-strip
 870
 871 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 872         am--refresh check check-am clean clean-cscope clean-generic \
 873         cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
 874         dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
 875         dist-zstd distcheck distclean distclean-generic \
 876         distclean-local distclean-tags distcleancheck distdir \
 877         distuninstallcheck dvi dvi-am html html-am info info-am \
 878         install install-am install-data install-data-am install-dvi \
 879         install-dvi-am install-exec install-exec-am install-html \
 880         install-html-am install-info install-info-am install-man \
 881         install-nobase_includeHEADERS install-pdf install-pdf-am \
 882         install-ps install-ps-am install-strip installcheck \
 883         installcheck-am installdirs installdirs-am maintainer-clean \
 884         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
 885         pdf-am ps ps-am tags tags-am uninstall uninstall-am \
 886         uninstall-nobase_includeHEADERS
 887
 888 .PRECIOUS: Makefile
 889
 890
 891 #
 892 # automake adds dependencies that we don't like, so we explicitly remove them
 893 #
 894 Makefile:
 895
 896 distcheck-hook:
 897 @HAVE_BINDDIR_TRUE@     chmod u+w $(distdir)/bind
 898
 899 distclean-local:
 900         rm -f config.report
 901
 902 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 903 # Otherwise a system limit (for SysV at least) may be exceeded.
 904 .NOEXPORT: