-RELEASEDVERSION = -- will be replaced by "make dist" --
-VERSION = $(shell [ -d .git ] && git describe --abbrev=0 --tags || echo $(RELEASEDVERSION))
-GITVERSION = $(shell [ -d .git ] && { v=$$(git describe --tags); echo -$${v\#*-}; } )
+-include dracut-version.sh
+
+VERSION ?= $(shell [ -d .git ] && git describe --abbrev=0 --tags --always 2>/dev/null || echo $(DRACUT_VERSION))
+GITVERSION ?= $(shell [ -d .git ] && { v=$$(git describe --tags --always 2>/dev/null); [ -n "$$v" ] && [ $${v\#*-} != $$v ] && echo -$${v\#*-}; } )
-include Makefile.inc
bindir ?= ${prefix}/bin
mandir ?= ${prefix}/share/man
CFLAGS ?= -O2 -g -Wall
-CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64
+CFLAGS += -std=gnu99 -D_FILE_OFFSET_BITS=64 -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 $(KMOD_CFLAGS)
bashcompletiondir ?= ${datadir}/bash-completion/completions
+pkgconfigdatadir ?= $(datadir)/pkgconfig
man1pages = lsinitrd.1
man5pages = dracut.conf.5
man7pages = dracut.cmdline.7 \
- dracut.bootup.7
+ dracut.bootup.7 \
+ dracut.modules.7
man8pages = dracut.8 \
dracut-catimages.8 \
mkinitrd.8 \
- modules.d/98systemd/dracut-cmdline.service.8 \
- modules.d/98systemd/dracut-initqueue.service.8 \
- modules.d/98systemd/dracut-mount.service.8 \
- modules.d/98systemd/dracut-pre-mount.service.8 \
- modules.d/98systemd/dracut-pre-pivot.service.8 \
- modules.d/98systemd/dracut-pre-trigger.service.8 \
- modules.d/98systemd/dracut-pre-udev.service.8
+ mkinitrd-suse.8 \
+ modules.d/98dracut-systemd/dracut-cmdline.service.8 \
+ modules.d/98dracut-systemd/dracut-initqueue.service.8 \
+ modules.d/98dracut-systemd/dracut-mount.service.8 \
+ modules.d/98dracut-systemd/dracut-shutdown.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-mount.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-pivot.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-trigger.service.8 \
+ modules.d/98dracut-systemd/dracut-pre-udev.service.8
manpages = $(man1pages) $(man5pages) $(man7pages) $(man8pages)
+.PHONY: install clean archive rpm srpm testimage test all check AUTHORS doc dracut-version.sh
-.PHONY: install clean archive rpm testimage test all check AUTHORS doc dracut-version.sh
-
-all: dracut-version.sh dracut-install
+all: dracut-version.sh dracut.pc dracut-install skipcpio/skipcpio
DRACUT_INSTALL_OBJECTS = \
install/dracut-install.o \
install/hashmap.o\
install/log.o \
+ install/strv.o \
install/util.o
# deps generated with gcc -MM
install/hashmap.h
install/log.o: install/log.c install/log.h install/macro.h install/util.h
install/util.o: install/util.c install/util.h install/macro.h install/log.h
+install/strv.o: install/strv.c install/strv.h install/util.h install/macro.h install/log.h
install/dracut-install: $(DRACUT_INSTALL_OBJECTS)
+ $(CC) $(LDFLAGS) -o $@ $(DRACUT_INSTALL_OBJECTS) $(LDLIBS) $(KMOD_LIBS)
+
+logtee: logtee.c
+ $(CC) $(LDFLAGS) -o $@ $<
dracut-install: install/dracut-install
ln -fs $< $@
+SKIPCPIO_OBJECTS= \
+ skipcpio/skipcpio.o
+
+skipcpio/skipcpio.o: skipcpio/skipcpio.c
+skipcpio/skipcpio: skipcpio/skipcpio.o
+
indent:
indent -i8 -nut -br -linux -l120 install/dracut-install.c
+ indent -i8 -nut -br -linux -l120 skipcpio/skipcpio.c
doc: $(manpages) dracut.html
endif
%: %.xml
- xsltproc -o $@ -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
+ @rm -f -- "$@"
+ xsltproc -o "$@" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
%.xml: %.asc
- asciidoc -d manpage -b docbook -o $@ $<
+ @rm -f -- "$@"
+ asciidoc -d manpage -b docbook -o "$@" $<
-dracut.html: dracut.asc $(manpages)
+dracut.8: dracut.usage.asc dracut.8.asc
+
+dracut.html: dracut.asc $(manpages) dracut.css dracut.usage.asc
+ @rm -f -- dracut.xml
asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc
+ @rm -f -- dracut.html
xsltproc -o dracut.html --xinclude -nonet \
- --stringparam html.stylesheet \
- http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \
+ --stringparam custom.css.source dracut.css \
+ --stringparam generate.css.header 1 \
http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
- rm dracut.xml
+ @rm -f -- dracut.xml
+
+dracut.pc: Makefile.inc Makefile
+ @echo "Name: dracut" > dracut.pc
+ @echo "Description: dracut" >> dracut.pc
+ @echo "Version: $(VERSION)$(GITVERSION)" >> dracut.pc
+ @echo "dracutdir=$(pkglibdir)" >> dracut.pc
+ @echo "dracutmodulesdir=$(pkglibdir)/modules.d" >> dracut.pc
+ @echo "dracutconfdir=$(pkglibdir)/dracut.conf.d" >> dracut.pc
-install: dracut-version.sh
+install: all
mkdir -p $(DESTDIR)$(pkglibdir)
mkdir -p $(DESTDIR)$(bindir)
mkdir -p $(DESTDIR)$(sysconfdir)
install -m 0644 dracut.conf $(DESTDIR)$(sysconfdir)/dracut.conf
mkdir -p $(DESTDIR)$(sysconfdir)/dracut.conf.d
mkdir -p $(DESTDIR)$(pkglibdir)/dracut.conf.d
+ install -m 0755 dracut-init.sh $(DESTDIR)$(pkglibdir)/dracut-init.sh
install -m 0755 dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions.sh
install -m 0755 dracut-version.sh $(DESTDIR)$(pkglibdir)/dracut-version.sh
ln -fs dracut-functions.sh $(DESTDIR)$(pkglibdir)/dracut-functions
endif
if [ -n "$(systemdsystemunitdir)" ]; then \
mkdir -p $(DESTDIR)$(systemdsystemunitdir); \
- install -m 0644 dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir); \
- mkdir -p $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants; \
+ ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/dracut-shutdown.service $(DESTDIR)$(systemdsystemunitdir)/dracut-shutdown.service; \
+ mkdir -p $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants; \
ln -s ../dracut-shutdown.service \
- $(DESTDIR)$(systemdsystemunitdir)/shutdown.target.wants/dracut-shutdown.service; \
+ $(DESTDIR)$(systemdsystemunitdir)/sysinit.target.wants/dracut-shutdown.service; \
mkdir -p $(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants; \
for i in \
dracut-cmdline.service \
dracut-pre-trigger.service \
dracut-pre-udev.service \
; do \
- ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
+ ln -srf $(DESTDIR)$(pkglibdir)/modules.d/98dracut-systemd/$$i $(DESTDIR)$(systemdsystemunitdir); \
ln -s ../$$i \
$(DESTDIR)$(systemdsystemunitdir)/initrd.target.wants/$$i; \
done \
if [ -f install/dracut-install ]; then \
install -m 0755 install/dracut-install $(DESTDIR)$(pkglibdir)/dracut-install; \
fi
+ if [ -f skipcpio/skipcpio ]; then \
+ install -m 0755 skipcpio/skipcpio $(DESTDIR)$(pkglibdir)/skipcpio; \
+ fi
mkdir -p $(DESTDIR)${prefix}/lib/kernel/install.d
install -m 0755 50-dracut.install $(DESTDIR)${prefix}/lib/kernel/install.d/50-dracut.install
install -m 0755 51-dracut-rescue.install $(DESTDIR)${prefix}/lib/kernel/install.d/51-dracut-rescue.install
mkdir -p $(DESTDIR)${bashcompletiondir}
install -m 0644 dracut-bash-completion.sh $(DESTDIR)${bashcompletiondir}/dracut
install -m 0644 lsinitrd-bash-completion.sh $(DESTDIR)${bashcompletiondir}/lsinitrd
+ mkdir -p $(DESTDIR)${pkgconfigdatadir}
+ install -m 0644 dracut.pc $(DESTDIR)${pkgconfigdatadir}/dracut.pc
dracut-version.sh:
+ @rm -f dracut-version.sh
@echo "DRACUT_VERSION=$(VERSION)$(GITVERSION)" > dracut-version.sh
clean:
$(RM) */*/*~
$(RM) $(manpages:%=%.xml) dracut.xml
$(RM) test-*.img
- $(RM) dracut-*.rpm dracut-*.tar.bz2
+ $(RM) dracut-*.rpm dracut-*.tar.bz2 dracut-*.tar.xz
$(RM) dracut-version.sh
$(RM) dracut-install install/dracut-install $(DRACUT_INSTALL_OBJECTS)
+ $(RM) skipcpio/skipcpio $(SKIPCPIO_OBJECTS)
$(RM) $(manpages) dracut.html
$(MAKE) -C test clean
-dist: dracut-$(VERSION).tar.bz2
+dist: dracut-$(VERSION).tar.xz
-dracut-$(VERSION).tar.bz2: doc
+dracut-$(VERSION).tar.xz: doc syncheck
+ @echo "DRACUT_VERSION=$(VERSION)" > dracut-version.sh
git archive --format=tar $(VERSION) --prefix=dracut-$(VERSION)/ > dracut-$(VERSION).tar
mkdir -p dracut-$(VERSION)
- cp $(manpages) dracut.html dracut-$(VERSION)
- git show $(VERSION):Makefile | sed 's/^RELEASEDVERSION =.*/RELEASEDVERSION = $(VERSION)/' > dracut-$(VERSION)/Makefile
- tar --owner=root --group=root -rf dracut-$(VERSION).tar dracut-$(VERSION)/*.[0-9] dracut-$(VERSION)/dracut.html dracut-$(VERSION)/Makefile
- rm -fr dracut-$(VERSION).tar.bz2 dracut-$(VERSION)
- bzip2 -9 dracut-$(VERSION).tar
- rm -f dracut-$(VERSION).tar
-
-rpm: dracut-$(VERSION).tar.bz2
+ for i in $(manpages) dracut.html dracut-version.sh; do [ "$${i%/*}" != "$$i" ] && mkdir -p "dracut-$(VERSION)/$${i%/*}"; cp "$$i" "dracut-$(VERSION)/$$i"; done
+ tar --owner=root --group=root -rf dracut-$(VERSION).tar $$(find dracut-$(VERSION) -type f)
+ rm -fr -- dracut-$(VERSION).tar.xz dracut-$(VERSION)
+ xz -9 dracut-$(VERSION).tar
+ rm -f -- dracut-$(VERSION).tar
+
+rpm: dracut-$(VERSION).tar.xz syncheck
rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
- cp dracut-$(VERSION).tar.bz2 "$$rpmbuild"; \
+ cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
- (cd "$$rpmbuild"; rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+ (cd "$$rpmbuild"; \
+ wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+ rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
--define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
--define "_rpmdir $$PWD" -ba dracut.spec; ) && \
- ( mv "$$rpmbuild"/$$(arch)/*.rpm .; mv "$$rpmbuild"/*.src.rpm .;rm -fr "$$rpmbuild"; ls *.rpm )
+ ( mv "$$rpmbuild"/{,$$(arch)/}*.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
+
+srpm: dracut-$(VERSION).tar.xz syncheck
+ rpmbuild=$$(mktemp -d -t rpmbuild-dracut.XXXXXX); src=$$(pwd); \
+ cp dracut-$(VERSION).tar.xz "$$rpmbuild"; \
+ LC_MESSAGES=C $$src/git2spec.pl $(VERSION) "$$rpmbuild" < dracut.spec > $$rpmbuild/dracut.spec; \
+ (cd "$$rpmbuild"; \
+ [ -f $$src/lgpl-2.1.txt ] && cp $$src/lgpl-2.1.txt . || wget https://www.gnu.org/licenses/lgpl-2.1.txt; \
+ rpmbuild --define "_topdir $$PWD" --define "_sourcedir $$PWD" \
+ --define "_specdir $$PWD" --define "_srcrpmdir $$PWD" \
+ --define "_rpmdir $$PWD" -bs dracut.spec; ) && \
+ ( mv "$$rpmbuild"/*.src.rpm $(DESTDIR).; rm -fr -- "$$rpmbuild"; ls $(DESTDIR)*.rpm )
syncheck:
@ret=0;for i in dracut-initramfs-restore.sh modules.d/*/*.sh; do \
[ "$${i##*/}" = "module-setup.sh" ] && continue; \
read line < "$$i"; [ "$${line#*bash*}" != "$$line" ] && continue; \
[ $$V ] && echo "posix syntax check: $$i"; bash --posix -n "$$i" ; ret=$$(($$ret+$$?)); \
- [ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi \
+ [ $$V ] && echo "checking for [[: $$i"; if grep -Fq '[[ ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains [["; fi; \
+ [ $$V ] && echo "checking for echo -n: $$i"; if grep -Fq 'echo -n ' "$$i" ; then ret=$$(($$ret+1)); echo "$$i contains echo -n"; fi \
done;exit $$ret
@ret=0;for i in *.sh mkinitrd-dracut.sh modules.d/*/*.sh \
modules.d/*/module-setup.sh; do \
@$(MAKE) -C test check
testimage: all
- ./dracut.sh -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+ ./dracut.sh -N -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+ @echo wrote test-$(shell uname -r).img
+
+debugtestimage: all
+ ./dracut.sh --debug -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
@echo wrote test-$(shell uname -r).img
testimages: all
./dracut.sh -l -a debug --no-kernel -f test-dracut.img $(shell uname -r)
@echo wrote test-dracut.img
+debughostimage: all
+ ./dracut.sh --debug -H -l -f test-$(shell uname -r).img $(shell uname -r)
+ @echo wrote test-$(shell uname -r).img
+
hostimage: all
- ./dracut.sh -H -l -a debug -f test-$(shell uname -r).img $(shell uname -r)
+ ./dracut.sh -H -l -f test-$(shell uname -r).img $(shell uname -r)
@echo wrote test-$(shell uname -r).img
+efi: all
+ ./dracut.sh --uefi -H -l -f linux-$(shell uname -r).efi $(shell uname -r)
+ @echo wrote linux-$(shell uname -r).efi
+
AUTHORS:
- git shortlog --numbered --summary -e |while read a rest; do echo $$rest;done > AUTHORS
+ git shortlog --numbered --summary -e |while read a rest || [ -n "$$rest" ]; do echo $$rest;done > AUTHORS
-dracut.html.sign: dracut-$(VERSION).tar.bz2
- gpg-sign-all dracut-$(VERSION).tar.bz2 dracut.html
+dracut.html.sign: dracut-$(VERSION).tar.xz dracut.html
+ gpg-sign-all dracut-$(VERSION).tar.xz dracut.html
upload: dracut.html.sign
- kup put dracut-$(VERSION).tar.bz2 dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
+ kup put dracut-$(VERSION).tar.xz dracut-$(VERSION).tar.sign /pub/linux/utils/boot/dracut/
kup put dracut.html dracut.html.sign /pub/linux/utils/boot/dracut/
projects / thirdparty / dracut.git / blobdiff