mkdir -p "$initdir"
fi
-if [[ $DRACUT_KERNEL_LAZY ]] && ! [[ $DRACUT_KERNEL_LAZY_HASHDIR ]]; then
- if ! [[ -d "$initdir/.kernelmodseen" ]]; then
- mkdir -p "$initdir/.kernelmodseen"
- fi
- DRACUT_KERNEL_LAZY_HASHDIR="$initdir/.kernelmodseen"
-fi
-
if ! [[ $kernel ]]; then
kernel=$(uname -r)
export kernel
[[ " $mods_to_load $modules_loaded " == *\ $*\ * ]]
}
+dracut_no_switch_root() {
+ >"$initdir/lib/dracut/no-switch-root"
+}
+
+dracut_module_path() {
+ echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }
+}
+
if ! [[ $DRACUT_INSTALL ]]; then
DRACUT_INSTALL=$(find_binary dracut-install)
fi
exit 10
fi
+if [[ $hostonly == "-h" ]]; then
+ if ! [[ $DRACUT_KERNEL_MODALIASES ]] || ! [[ -f "$DRACUT_KERNEL_MODALIASES" ]]; then
+ export DRACUT_KERNEL_MODALIASES="${DRACUT_TMPDIR}/modaliases"
+ $DRACUT_INSTALL ${srcmods:+--kerneldir "$srcmods"} --modalias > "$DRACUT_KERNEL_MODALIASES"
+ fi
+fi
+
[[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1
inst_dir() {
[[ -e ${initdir}/"$1" ]] && return 0 # already there
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || :
}
+inst_fsck_help() {
+ local _helper="/run/dracut/fsck/fsck_help_$1.txt"
+ $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper
+ (($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper || :
+}
+
+# Use with form hostonly="$(optional_hostonly)" inst_xxxx <args>
+# If hosotnly mode is set to "strict", hostonly restrictions will still
+# be applied, else will ignore hostonly mode and try to install all
+# given modules.
+optional_hostonly() {
+ if [[ $hostonly_mode = "strict" ]]; then
+ printf -- "$hostonly"
+ else
+ printf ""
+ fi
+}
+
mark_hostonly() {
for i in "$@"; do
echo "$i" >> "$initdir/lib/dracut/hostonly-files"
[[ $_files ]] && inst_multiple $_files
}
+# get a command to decompress the given file
+get_decompress_cmd() {
+ case "$1" in
+ *.gz) echo 'gzip -f -d' ;;
+ *.bz2) echo 'bzip2 -d' ;;
+ *.xz) echo 'xz -f -d' ;;
+ esac
+}
# install function decompressing the target and handling symlinks
# $@ = list of compressed (gz or bz2) files or symlinks pointing to such files
for _src in $@
do
- case ${_src} in
- *.gz) _cmd='gzip -f -d' ;;
- *.bz2) _cmd='bzip2 -d' ;;
- *) return 1 ;;
- esac
+ _cmd=$(get_decompress_cmd ${_src})
+ [[ -z "${_cmd}" ]] && return 1
inst_simple ${_src}
# Decompress with chosen tool. We assume that tool changes name e.g.
# from 'name.gz' to 'name'.
done
}
-# module_check <dracut module>
+# module_check <dracut module> [<forced>] [<module path>]
# execute the check() function of module-setup.sh of <dracut module>
# or the "check" script, if module-setup.sh is not found
# "check $hostonly" is called
module_check() {
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$3
local _ret
local _forced=0
local _hostonly=$hostonly
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
[ $# -eq 2 ] && _forced=$2
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
return $_ret
}
-# module_check_mount <dracut module>
+# module_check_mount <dracut module> [<module path>]
# execute the check() function of module-setup.sh of <dracut module>
# or the "check" script, if module-setup.sh is not found
# "mount_needs=1 check 0" is called
module_check_mount() {
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$2
local _ret
mount_needs=1
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we are unconditionally included
return $_ret
}
-# module_depends <dracut module>
+# module_depends <dracut module> [<module path>]
# execute the depends() function of module-setup.sh of <dracut module>
# or the "depends" script, if module-setup.sh is not found
module_depends() {
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$2
local _ret
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we have no deps
fi
}
-# module_cmdline <dracut module>
+# module_cmdline <dracut module> [<module path>]
# execute the cmdline() function of module-setup.sh of <dracut module>
# or the "cmdline" script, if module-setup.sh is not found
module_cmdline() {
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$2
local _ret
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/cmdline ]] && . "$_moddir/cmdline"
fi
}
-# module_install <dracut module>
+# module_install <dracut module> [<module path>]
# execute the install() function of module-setup.sh of <dracut module>
# or the "install" script, if module-setup.sh is not found
module_install() {
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$2
local _ret
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/install ]] && . "$_moddir/install"
fi
}
-# module_installkernel <dracut module>
+# module_installkernel <dracut module> [<module path>]
# execute the installkernel() function of module-setup.sh of <dracut module>
# or the "installkernel" script, if module-setup.sh is not found
module_installkernel() {
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$2
local _ret
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/installkernel ]] && . "$_moddir/installkernel"
fi
}
-# check_mount <dracut module>
+# check_mount <dracut module> [<use_as_dep>] [<module path>]
# check_mount checks, if a dracut module is needed for the given
# device and filesystem types in "${host_fs_types[@]}"
check_mount() {
local _mod=$1
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$3
local _ret
local _moddep
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
[ "${#host_fs_types[@]}" -le 0 ] && return 1
# If we are already scheduled to be loaded, no need to check again.
fi
if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
- module_check_mount $_mod; ret=$?
+ module_check_mount $_mod $_moddir; ret=$?
# explicit module, so also accept ret=255
[[ $ret = 0 || $ret = 255 ]] || return 1
# module not in our list
if [[ $dracutmodules = all ]]; then
# check, if we can and should install this module
- module_check_mount $_mod || return 1
+ module_check_mount $_mod $_moddir || return 1
else
# skip this module
return 1
fi
fi
- for _moddep in $(module_depends $_mod); do
+ for _moddep in $(module_depends $_mod $_moddir); do
# handle deps as if they were manually added
[[ " $dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_moddep\ * ]] \
return 0
}
-# check_module <dracut module> [<use_as_dep>]
+# check_module <dracut module> [<use_as_dep>] [<module path>]
# check if a dracut module is to be used in the initramfs process
# if <use_as_dep> is set, then the process also keeps track
# that the modules were checked for the dependency tracking process
check_module() {
local _mod=$1
- local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
+ local _moddir=$3
local _ret
local _moddep
+
+ [[ -z $_moddir ]] && _moddir=$(dracut_module_path "$1")
# If we are already scheduled to be loaded, no need to check again.
[[ " $mods_to_load " == *\ $_mod\ * ]] && return 0
[[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1
if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then
- module_check $_mod 1; ret=$?
+ module_check $_mod 1 $_moddir; ret=$?
else
- module_check $_mod 0; ret=$?
+ module_check $_mod 0 $_moddir; ret=$?
fi
# explicit module, so also accept ret=255
[[ $ret = 0 || $ret = 255 ]] || return 1
# module not in our list
if [[ $dracutmodules = all ]]; then
# check, if we can and should install this module
- module_check $_mod; ret=$?
+ module_check $_mod 0 $_moddir; ret=$?
if [[ $ret != 0 ]]; then
[[ $2 ]] && return 1
[[ $ret != 255 ]] && return 1
fi
fi
- for _moddep in $(module_depends $_mod); do
+ for _moddep in $(module_depends $_mod $_moddir); do
# handle deps as if they were manually added
[[ " $dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_moddep\ * ]] \
}
# for_each_module_dir <func>
-# execute "<func> <dracut module> 1"
+# execute "<func> <dracut module> 1 <module path>"
for_each_module_dir() {
local _modcheck
local _mod
[[ -e $_moddir/install || -e $_moddir/installkernel || \
-e $_moddir/module-setup.sh ]] || continue
_mod=${_moddir##*/}; _mod=${_mod#[0-9][0-9]}
- $_func $_mod 1
+ $_func $_mod 1 $_moddir
done
# Report any missing dracut modules, the user has specified
inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}"
ret=$?
(($ret != 0)) && return $ret
+ local _cmd=$(get_decompress_cmd "$1")
+ [[ -n "${_cmd}" ]] && \
+ ${_cmd} "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}"
local _modname=${1##*/} _fwdir _found _fw
_modname=${_modname%.ko*}
for _fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
_found=''
for _fwdir in $fw_dir; do
- [[ -d $_fwdir && -f $_fwdir/$_fw ]] || continue
- inst_simple "$_fwdir/$_fw" "/lib/firmware/$_fw"
+ [[ -d $_fwdir ]] || continue
+ if [[ -f $_fwdir/$_fw ]]; then
+ inst_simple "$_fwdir/$_fw" "/lib/firmware/$_fw"
+ elif [[ -f $_fwdir/$_fw.xz ]]; then
+ inst_simple "$_fwdir/$_fw.xz" "/lib/firmware/$_fw.xz"
+ rm -f "${initdir}/lib/firmware/$_fw"
+ unxz -f "${initdir}/lib/firmware/$_fw.xz"
+ else
+ continue
+ fi
_found=yes
done
if [[ $_found != yes ]]; then
}
dracut_kernel_post() {
- local _moddirname=${srcmods%%/lib/modules/*}
- local _pid
-
for _f in modules.builtin.bin modules.builtin modules.order; do
- [[ $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
+ [[ -e $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
done
# generate module dependencies for the initrd
set -- "${args[@]}"
fi
+ if (($# == 0)); then
+ return 0
+ fi
+
$DRACUT_INSTALL \
${initdir:+-D "$initdir"} \
${loginstall:+-L "$loginstall"} \
projects / thirdparty / dracut.git / blobdiff