dracut-install: Add support for compressed kernel modules

[thirdparty/dracut.git] / dracut.usage.asc

diff --git a/dracut.usage.asc b/dracut.usage.asc
index 2b25588f99422671dd8149240a9e8b1b166748fe..0f219fc9cc19dd8d9e3b0087e48ad78a6f151bf3 100644 (file)
--- a/dracut.usage.asc
+++ b/dracut.usage.asc
@@ -83,7 +83,7 @@ on the command line:
 === Adding Kernel Modules
 If you need a special kernel module in the initramfs, which is not
 automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
+on the command line or  the drivers variable in  the _/etc/dracut.conf_
 or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
 ----
 # dracut --add-drivers mymod initramfs-with-mymod.img
@@ -94,7 +94,7 @@ An initramfs generated without the "hostonly" mode, does not contain any system
 configuration files (except for some special exceptions), so the configuration
 has to be done on the kernel command line. With this flexibility, you can easily
 boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
+image. So, you could completely change your root partition (move it inside a md
 raid with encryption and LVM on top), as long as you specify the correct
 filesystem LABEL or UUID on the kernel command line for your root device, dracut
 will find it and boot from it.
@@ -185,7 +185,7 @@ This turns off every automatic assembly of LVM, MD raids, DM raids and
 crypto LUKS.
 
 Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
+process, but then you would lose the possibility to turn it on on demand.
 
 
 [[Injecting]]
@@ -243,7 +243,7 @@ If your root partition is on a network drive, you have to have the network
 dracut modules installed to create a network aware initramfs image.
 
 If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
-server about the ip adress for the machine. The dhcp server can also serve an
+server about the ip address for the machine. The dhcp server can also serve an
 additional root-path, which will set the root device for dracut. With this
 mechanism, you have static configuration on your client machine and a
 centralized boot configuration on your TFTP/DHCP server. If you can't pass a
@@ -252,7 +252,7 @@ method described in <<Injecting>>.
 
 ==== Reducing the Image Size
 
-To reduce the size of the initramfs, you should create it with by ommitting all
+To reduce the size of the initramfs, you should create it with by omitting all
 dracut modules, which you know, you don't need to boot the machine.
 
 You can also specify the exact dracut and kernel modules to produce a very tiny