Fix 98dracut-systemd/dracut-emergency.sh

[thirdparty/dracut.git] / dracut.usage.asc

diff --git a/dracut.usage.asc b/dracut.usage.asc
index b4a8663a6068d6be7c34f6046ba929fcc8dc47a8..0f219fc9cc19dd8d9e3b0087e48ad78a6f151bf3 100644 (file)
--- a/dracut.usage.asc
+++ b/dracut.usage.asc
@@ -83,7 +83,7 @@ on the command line:
 === Adding Kernel Modules
 If you need a special kernel module in the initramfs, which is not
 automatically picked up by dracut, you have the use the --add-drivers option
-on the command line or  the drivers vaiable in  the _/etc/dracut.conf_
+on the command line or  the drivers variable in  the _/etc/dracut.conf_
 or _/etc/dracut.conf.d/myconf.conf_ configuration file (see *dracut.conf*(5)):
 ----
 # dracut --add-drivers mymod initramfs-with-mymod.img
@@ -94,15 +94,11 @@ An initramfs generated without the "hostonly" mode, does not contain any system
 configuration files (except for some special exceptions), so the configuration
 has to be done on the kernel command line. With this flexibility, you can easily
 boot from a changed root partition, without the need to recompile the initramfs
-image. So, you could completly change your root partition (move it inside a md
+image. So, you could completely change your root partition (move it inside a md
 raid with encryption and LVM on top), as long as you specify the correct
 filesystem LABEL or UUID on the kernel command line for your root device, dracut
 will find it and boot from it.
 
-The kernel command line usually can be configured in _/boot/grub/grub.conf_ or
-_/boot/grub2/grub.cfg_, if grub is your bootloader and it also can be edited in
-the real boot process in the grub menu.
-
 The kernel command line can also be provided by the dhcp server with the
 root-path option. See <<NetworkBoot>>.
 
@@ -189,7 +185,7 @@ This turns off every automatic assembly of LVM, MD raids, DM raids and
 crypto LUKS.
 
 Of course, you could also omit the dracut modules in the initramfs creation
-process, but then you would lose the posibility to turn it on on demand.
+process, but then you would lose the possibility to turn it on on demand.
 
 
 [[Injecting]]
@@ -247,7 +243,7 @@ If your root partition is on a network drive, you have to have the network
 dracut modules installed to create a network aware initramfs image.
 
 If you specify ip=dhcp on the kernel command line, then dracut asks a dhcp
-server about the ip adress for the machine. The dhcp server can also serve an
+server about the ip address for the machine. The dhcp server can also serve an
 additional root-path, which will set the root device for dracut. With this
 mechanism, you have static configuration on your client machine and a
 centralized boot configuration on your TFTP/DHCP server. If you can't pass a
@@ -256,7 +252,7 @@ method described in <<Injecting>>.
 
 ==== Reducing the Image Size
 
-To reduce the size of the initramfs, you should create it with by ommitting all
+To reduce the size of the initramfs, you should create it with by omitting all
 dracut modules, which you know, you don't need to boot the machine.
 
 You can also specify the exact dracut and kernel modules to produce a very tiny
@@ -310,7 +306,7 @@ stick and mount that. Then you can store the output for later inspection.
 In all cases, the following should be mentioned and attached to your bug report:
 
 * The exact kernel command-line used. Typically from the bootloader
-configuration file (e.g. _/etc/grub.conf_) or from _/proc/cmdline_.
+configuration file (e.g. _/boot/grub2/grub.cfg_) or from _/proc/cmdline_.
 * A copy of your disk partition information from _/etc/fstab_, which might be
 obtained booting an old working initramfs or a rescue medium.
 * Turn on dracut debugging (see _the 'debugging dracut' section_), and attach
@@ -345,7 +341,7 @@ logging during the system boot.  This section documents configuring a
 serial console connection to record boot messages.
 
 . First, enable serial console output for both the kernel and the bootloader.
-. Open the file _/etc/grub.conf_ for editing. Below the line ''timeout=5'', add
+. Open the file _/boot/grub2/grub.cfg_ for editing. Below the line ''timeout=5'', add
 the following:
 +
 ----
@@ -353,14 +349,14 @@ serial --unit=0 --speed=9600
 terminal --timeout=5 serial console
 ----
 +
-. Also in _/etc/grub.conf_, add the following boot arguemnts to the ''kernel''
+. Also in _/boot/grub2/grub.cfg_, add the following boot arguemnts to the ''kernel''
 line:
 +
 ----
 console=tty0 console=ttyS0,9600
 ----
 +
-. When finished, the _/etc/grub.conf_ file should look similar to the example
+. When finished, the _/boot/grub2/grub.cfg_ file should look similar to the example
 below.
 +
 ----
@@ -395,10 +391,10 @@ dracut offers a shell for interactive debugging in the event dracut fails to
 locate your root filesystem. To enable the shell:
 
 . Add the boot parameter ''rd.shell'' to your bootloader configuration file
-(e.g. _/etc/grub.conf_)
+(e.g. _/boot/grub2/grub.cfg_)
 . Remove the boot arguments ''rhgb'' and ''quiet''
 +
-A sample _/etc/grub.conf_ bootloader configuration file is listed below.
+A sample _/boot/grub2/grub.cfg_ bootloader configuration file is listed below.
 +
 ----
 default=0