# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gdbserver gprof etc expect dejagnu m4 utils guile fastjar gnattools libcc1 gotools"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
;;
*-*-darwin* | *-*-aix*)
;;
- nvptx*-*-*)
+ nvptx*-*-* | amdgcn*-*-*)
;;
*)
noconfigdirs="$noconfigdirs target-libgomp"
# VxWorks uses the Dinkumware C++ library.
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
+ amdgcn*-*-*)
+ # Not ported/fails to build when using newlib.
+ noconfigdirs="$noconfigdirs target-libstdc++-v3"
+ ;;
arm*-wince-pe*)
# the C++ libraries don't build on top of CE's C libraries
noconfigdirs="$noconfigdirs target-libstdc++-v3"
;;
esac
+# Only allow gdbserver on some systems.
+if test -d ${srcdir}/gdbserver; then
+ if test x$enable_gdbserver = x; then
+ AC_MSG_CHECKING([for gdbserver support])
+ if (srcdir=${srcdir}/gdbserver; \
+ . ${srcdir}/configure.srv; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs gdbserver"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
# Disable libgo for some systems where it is known to not work.
# For testing, you can easily override this with --enable-libgo.
if test x$enable_libgo = x; then
noconfigdirs="$noconfigdirs ld gas gdb gprof sim"
noconfigdirs="$noconfigdirs $target_libraries"
;;
+ pdp11-*-*)
+ noconfigdirs="$noconfigdirs gdb gprof"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof"
;;
esac
-# When bootstrapping with GCC, build stage 1 in C++98 mode to ensure that a
-# C++98 compiler can still start the bootstrap.
+# When bootstrapping with GCC, build stage 1 in C++11 mode to ensure that a
+# C++11 compiler can still start the bootstrap.
if test "$enable_bootstrap:$GXX" = "yes:yes"; then
- CXX="$CXX -std=gnu++98"
+ CXX="$CXX -std=c++11"
fi
# Used for setting $lt_cv_objdir
int t;
mpfr_init (n);
mpfr_init (x);
- mpfr_atan2 (n, n, x, GMP_RNDN);
- mpfr_erfc (n, x, GMP_RNDN);
- mpfr_subnormalize (x, t, GMP_RNDN);
+ mpfr_atan2 (n, n, x, MPFR_RNDN);
+ mpfr_erfc (n, x, MPFR_RNDN);
+ mpfr_subnormalize (x, t, MPFR_RNDN);
mpfr_clear(n);
mpfr_clear(x);
mpc_init2 (c, 53);
Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
their locations. Source code for these libraries can be found at
their respective hosting sites as well as at
-ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also
+https://gcc.gnu.org/pub/gcc/infrastructure/. See also
http://gcc.gnu.org/install/prerequisites.html for additional info. If
you obtained GMP, MPFR and/or MPC from a vendor distribution package,
make sure that you have installed both the libraries and the header
esac
# Disable jit if -enable-host-shared not specified
- case ${add_this_lang}:${language}:${host_shared} in
- yes:jit:no)
- # PR jit/64780: explicitly specify --enable-host-shared
+ # but not if building for Mingw. All code in Windows
+ # is position independent code (PIC).
+ case $target in
+ *mingw*) ;;
+ *)
+ case ${add_this_lang}:${language}:${host_shared} in
+ yes:jit:no)
+ # PR jit/64780: explicitly specify --enable-host-shared
AC_MSG_ERROR([
Enabling language "jit" requires --enable-host-shared.
best to do this via two separate configure/builds, in separate
directories, to avoid imposing the performance cost of
--enable-host-shared on the regular compiler.])
- ;;
- all:jit:no)
- AC_MSG_WARN([--enable-host-shared required to build $language])
- add_this_lang=unsupported
- ;;
- *:jit:no)
- # Silently disable.
- add_this_lang=unsupported
- ;;
- esac
+ ;;
+ all:jit:no)
+ AC_MSG_WARN([--enable-host-shared required to build $language])
+ add_this_lang=unsupported
+ ;;
+ *:jit:no)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+ ;;
+ esac
# Disable a language that is unsupported by the target.
case "${add_this_lang}: $unsupported_languages " in
CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
-# gdb depends on gnulib, but as nothing else does, only include it if
-# gdb is built.
-if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
- # The Makefile provides the ordering, so it's enough here to add
- # gnulib to the list.
- configdirs="${configdirs} gnulib"
-fi
+# gdb and gdbserver depend on gnulib and gdbsupport, but as nothing
+# else does, only include them if one of these is built. The Makefile
+# provides the ordering, so it's enough here to add to the list.
+case " ${configdirs} " in
+ *\ gdb\ *)
+ configdirs="${configdirs} gnulib gdbsupport"
+ ;;
+ *\ gdbserver\ *)
+ configdirs="${configdirs} gnulib gdbsupport"
+ ;;
+esac
# Strip out unwanted targets.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
case "$target" in
hppa*64*-*-hpux*) ;;
- hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/* | gcc/function-tests.o" ;;
- powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
+ hppa*-*-hpux*) compare_exclusions="$compare_exclusions | */libgcc/lib2funcs* | gcc/function-tests.o" ;;
+ powerpc*-ibm-aix*) compare_exclusions="$compare_exclusions | *libgomp*\$(objext)" ;;
esac
AC_SUBST(compare_exclusions)
projects / thirdparty / gcc.git / blobdiff