+2019-08-22 Segher Boessenkool <segher@kernel.crashing.org>
+
+ * config/rs6000/altivec.md (unspec): Delete UNSPEC_DARN, UNSPEC_DARN_32,
+ UNSPEC_DARN_RAW, UNSPEC_CMPRB, UNSPEC_CMPRB2, UNSPEC_CMPEQB; move to...
+ * config/rs6000/rs6000.md (unspec): ... here.
+ * config/rs6000/altivec.md (darn_32, darn_raw, darn, cmprb,
+ *cmprb_internal, setb_signed, setb_unsigned, cmprb2, *cmprb2_internal,
+ cmpeqb, *cmpeqb_internal): Delete, move to...
+ * config/rs6000/rs6000.md (darn_32, darn_raw, darn, cmprb,
+ *cmprb_internal, setb_signed, setb_unsigned, cmprb2, *cmprb2_internal,
+ cmpeqb, *cmpeqb_internal): ... here.
+
2019-08-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/arm/arm_acle.h: Use arch=armv8-a+crc+simd pragma for CRC32
UNSPEC_VUPKHPX
UNSPEC_VUPKLPX
UNSPEC_CONVERT_4F32_8I16
- UNSPEC_DARN
- UNSPEC_DARN_32
- UNSPEC_DARN_RAW
UNSPEC_DST
UNSPEC_DSTT
UNSPEC_DSTST
UNSPEC_BCDADD
UNSPEC_BCDSUB
UNSPEC_BCD_OVERFLOW
- UNSPEC_CMPRB
- UNSPEC_CMPRB2
- UNSPEC_CMPEQB
UNSPEC_VRLMI
UNSPEC_VRLNM
])
"bcd<bcd_add_sub>. %0,%1,%2,%3"
[(set_attr "type" "vecsimple")])
-(define_insn "darn_32"
- [(set (match_operand:SI 0 "register_operand" "=r")
- (unspec:SI [(const_int 0)] UNSPEC_DARN_32))]
- "TARGET_P9_MISC"
- "darn %0,0"
- [(set_attr "type" "integer")])
-
-(define_insn "darn_raw"
- [(set (match_operand:DI 0 "register_operand" "=r")
- (unspec:DI [(const_int 0)] UNSPEC_DARN_RAW))]
- "TARGET_P9_MISC && TARGET_64BIT"
- "darn %0,2"
- [(set_attr "type" "integer")])
-
-(define_insn "darn"
- [(set (match_operand:DI 0 "register_operand" "=r")
- (unspec:DI [(const_int 0)] UNSPEC_DARN))]
- "TARGET_P9_MISC && TARGET_64BIT"
- "darn %0,1"
- [(set_attr "type" "integer")])
-
-;; Test byte within range.
-;;
-;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
-;; represents a byte whose value is ignored in this context and
-;; vv, the least significant byte, holds the byte value that is to
-;; be tested for membership within the range specified by operand 2.
-;; The bytes of operand 2 are organized as xx:xx:hi:lo.
-;;
-;; Return in target register operand 0 a value of 1 if lo <= vv and
-;; vv <= hi. Otherwise, set register operand 0 to 0.
-;;
-;; Though the instructions to which this expansion maps operate on
-;; 64-bit registers, the current implementation only operates on
-;; SI-mode operands as the high-order bits provide no information
-;; that is not already available in the low-order bits. To avoid the
-;; costs of data widening operations, future enhancements might allow
-;; DI mode for operand 0 and/or might allow operand 1 to be QI mode.
-(define_expand "cmprb"
- [(set (match_dup 3)
- (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
- (match_operand:SI 2 "gpc_reg_operand" "r")]
- UNSPEC_CMPRB))
- (set (match_operand:SI 0 "gpc_reg_operand" "=r")
- (if_then_else:SI (lt (match_dup 3)
- (const_int 0))
- (const_int -1)
- (if_then_else (gt (match_dup 3)
- (const_int 0))
- (const_int 1)
- (const_int 0))))]
- "TARGET_P9_MISC"
-{
- operands[3] = gen_reg_rtx (CCmode);
-})
-
-;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
-;; represents a byte whose value is ignored in this context and
-;; vv, the least significant byte, holds the byte value that is to
-;; be tested for membership within the range specified by operand 2.
-;; The bytes of operand 2 are organized as xx:xx:hi:lo.
-;;
-;; Set bit 1 (the GT bit, 0x4) of CR register operand 0 to 1 if
-;; lo <= vv and vv <= hi. Otherwise, set the GT bit to 0. The other
-;; 3 bits of the target CR register are all set to 0.
-(define_insn "*cmprb_internal"
- [(set (match_operand:CC 0 "cc_reg_operand" "=y")
- (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
- (match_operand:SI 2 "gpc_reg_operand" "r")]
- UNSPEC_CMPRB))]
- "TARGET_P9_MISC"
- "cmprb %0,0,%1,%2"
- [(set_attr "type" "logical")])
-
-;; Set operand 0 register to -1 if the LT bit (0x8) of condition
-;; register operand 1 is on. Otherwise, set operand 0 register to 1
-;; if the GT bit (0x4) of condition register operand 1 is on.
-;; Otherwise, set operand 0 to 0. Note that the result stored into
-;; register operand 0 is non-zero iff either the LT or GT bits are on
-;; within condition register operand 1.
-(define_insn "setb_signed"
- [(set (match_operand:SI 0 "gpc_reg_operand" "=r")
- (if_then_else:SI (lt (match_operand:CC 1 "cc_reg_operand" "y")
- (const_int 0))
- (const_int -1)
- (if_then_else (gt (match_dup 1)
- (const_int 0))
- (const_int 1)
- (const_int 0))))]
- "TARGET_P9_MISC"
- "setb %0,%1"
- [(set_attr "type" "logical")])
-
-(define_insn "setb_unsigned"
- [(set (match_operand:SI 0 "gpc_reg_operand" "=r")
- (if_then_else:SI (ltu (match_operand:CCUNS 1 "cc_reg_operand" "y")
- (const_int 0))
- (const_int -1)
- (if_then_else (gtu (match_dup 1)
- (const_int 0))
- (const_int 1)
- (const_int 0))))]
- "TARGET_P9_MISC"
- "setb %0,%1"
- [(set_attr "type" "logical")])
-
-;; Test byte within two ranges.
-;;
-;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
-;; represents a byte whose value is ignored in this context and
-;; vv, the least significant byte, holds the byte value that is to
-;; be tested for membership within the range specified by operand 2.
-;; The bytes of operand 2 are organized as hi_1:lo_1:hi_2:lo_2.
-;;
-;; Return in target register operand 0 a value of 1 if (lo_1 <= vv and
-;; vv <= hi_1) or if (lo_2 <= vv and vv <= hi_2). Otherwise, set register
-;; operand 0 to 0.
-;;
-;; Though the instructions to which this expansion maps operate on
-;; 64-bit registers, the current implementation only operates on
-;; SI-mode operands as the high-order bits provide no information
-;; that is not already available in the low-order bits. To avoid the
-;; costs of data widening operations, future enhancements might allow
-;; DI mode for operand 0 and/or might allow operand 1 to be QI mode.
-(define_expand "cmprb2"
- [(set (match_dup 3)
- (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
- (match_operand:SI 2 "gpc_reg_operand" "r")]
- UNSPEC_CMPRB2))
- (set (match_operand:SI 0 "gpc_reg_operand" "=r")
- (if_then_else:SI (lt (match_dup 3)
- (const_int 0))
- (const_int -1)
- (if_then_else (gt (match_dup 3)
- (const_int 0))
- (const_int 1)
- (const_int 0))))]
- "TARGET_P9_MISC"
-{
- operands[3] = gen_reg_rtx (CCmode);
-})
-
-;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
-;; represents a byte whose value is ignored in this context and
-;; vv, the least significant byte, holds the byte value that is to
-;; be tested for membership within the ranges specified by operand 2.
-;; The bytes of operand 2 are organized as hi_1:lo_1:hi_2:lo_2.
-;;
-;; Set bit 1 (the GT bit, 0x4) of CR register operand 0 to 1 if
-;; (lo_1 <= vv and vv <= hi_1) or if (lo_2 <= vv and vv <= hi_2).
-;; Otherwise, set the GT bit to 0. The other 3 bits of the target
-;; CR register are all set to 0.
-(define_insn "*cmprb2_internal"
- [(set (match_operand:CC 0 "cc_reg_operand" "=y")
- (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
- (match_operand:SI 2 "gpc_reg_operand" "r")]
- UNSPEC_CMPRB2))]
- "TARGET_P9_MISC"
- "cmprb %0,1,%1,%2"
- [(set_attr "type" "logical")])
-
-;; Test byte membership within set of 8 bytes.
-;;
-;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
-;; represents a byte whose value is ignored in this context and
-;; vv, the least significant byte, holds the byte value that is to
-;; be tested for membership within the set specified by operand 2.
-;; The bytes of operand 2 are organized as e0:e1:e2:e3:e4:e5:e6:e7.
-;;
-;; Return in target register operand 0 a value of 1 if vv equals one
-;; of the values e0, e1, e2, e3, e4, e5, e6, or e7. Otherwise, set
-;; register operand 0 to 0. Note that the 8 byte values held within
-;; operand 2 need not be unique.
-;;
-;; Though the instructions to which this expansion maps operate on
-;; 64-bit registers, the current implementation requires that operands
-;; 0 and 1 have mode SI as the high-order bits provide no information
-;; that is not already available in the low-order bits. To avoid the
-;; costs of data widening operations, future enhancements might allow
-;; DI mode for operand 0 and/or might allow operand 1 to be QI mode.
-(define_expand "cmpeqb"
- [(set (match_dup 3)
- (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
- (match_operand:DI 2 "gpc_reg_operand" "r")]
- UNSPEC_CMPEQB))
- (set (match_operand:SI 0 "gpc_reg_operand" "=r")
- (if_then_else:SI (lt (match_dup 3)
- (const_int 0))
- (const_int -1)
- (if_then_else (gt (match_dup 3)
- (const_int 0))
- (const_int 1)
- (const_int 0))))]
- "TARGET_P9_MISC && TARGET_64BIT"
-{
- operands[3] = gen_reg_rtx (CCmode);
-})
-
-;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
-;; represents a byte whose value is ignored in this context and
-;; vv, the least significant byte, holds the byte value that is to
-;; be tested for membership within the set specified by operand 2.
-;; The bytes of operand 2 are organized as e0:e1:e2:e3:e4:e5:e6:e7.
-;;
-;; Set bit 1 (the GT bit, 0x4) of CR register operand 0 to 1 if vv
-;; equals one of the values e0, e1, e2, e3, e4, e5, e6, or e7. Otherwise,
-;; set the GT bit to zero. The other 3 bits of the target CR register
-;; are all set to 0.
-(define_insn "*cmpeqb_internal"
- [(set (match_operand:CC 0 "cc_reg_operand" "=y")
- (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
- (match_operand:DI 2 "gpc_reg_operand" "r")]
- UNSPEC_CMPEQB))]
- "TARGET_P9_MISC && TARGET_64BIT"
- "cmpeqb %0,%1,%2"
- [(set_attr "type" "logical")])
-
(define_expand "bcd<bcd_add_sub>_<code>"
[(parallel [(set (reg:CCFP CR6_REGNO)
(compare:CCFP
UNSPEC_LSQ
UNSPEC_FUSION_GPR
UNSPEC_STACK_CHECK
+ UNSPEC_DARN
+ UNSPEC_DARN_32
+ UNSPEC_DARN_RAW
+ UNSPEC_CMPRB
+ UNSPEC_CMPRB2
+ UNSPEC_CMPEQB
UNSPEC_ADD_ROUND_TO_ODD
UNSPEC_SUB_ROUND_TO_ODD
UNSPEC_MUL_ROUND_TO_ODD
"xscmpuqp %0,%1,%2"
[(set_attr "type" "veccmp")
(set_attr "size" "128")])
+\f
+;; Miscellaneous ISA 3.0 (power9) instructions
+
+(define_insn "darn_32"
+ [(set (match_operand:SI 0 "register_operand" "=r")
+ (unspec:SI [(const_int 0)] UNSPEC_DARN_32))]
+ "TARGET_P9_MISC"
+ "darn %0,0"
+ [(set_attr "type" "integer")])
+
+(define_insn "darn_raw"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (unspec:DI [(const_int 0)] UNSPEC_DARN_RAW))]
+ "TARGET_P9_MISC && TARGET_64BIT"
+ "darn %0,2"
+ [(set_attr "type" "integer")])
+
+(define_insn "darn"
+ [(set (match_operand:DI 0 "register_operand" "=r")
+ (unspec:DI [(const_int 0)] UNSPEC_DARN))]
+ "TARGET_P9_MISC && TARGET_64BIT"
+ "darn %0,1"
+ [(set_attr "type" "integer")])
+
+;; Test byte within range.
+;;
+;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
+;; represents a byte whose value is ignored in this context and
+;; vv, the least significant byte, holds the byte value that is to
+;; be tested for membership within the range specified by operand 2.
+;; The bytes of operand 2 are organized as xx:xx:hi:lo.
+;;
+;; Return in target register operand 0 a value of 1 if lo <= vv and
+;; vv <= hi. Otherwise, set register operand 0 to 0.
+;;
+;; Though the instructions to which this expansion maps operate on
+;; 64-bit registers, the current implementation only operates on
+;; SI-mode operands as the high-order bits provide no information
+;; that is not already available in the low-order bits. To avoid the
+;; costs of data widening operations, future enhancements might allow
+;; DI mode for operand 0 and/or might allow operand 1 to be QI mode.
+(define_expand "cmprb"
+ [(set (match_dup 3)
+ (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
+ (match_operand:SI 2 "gpc_reg_operand" "r")]
+ UNSPEC_CMPRB))
+ (set (match_operand:SI 0 "gpc_reg_operand" "=r")
+ (if_then_else:SI (lt (match_dup 3)
+ (const_int 0))
+ (const_int -1)
+ (if_then_else (gt (match_dup 3)
+ (const_int 0))
+ (const_int 1)
+ (const_int 0))))]
+ "TARGET_P9_MISC"
+{
+ operands[3] = gen_reg_rtx (CCmode);
+})
+
+;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
+;; represents a byte whose value is ignored in this context and
+;; vv, the least significant byte, holds the byte value that is to
+;; be tested for membership within the range specified by operand 2.
+;; The bytes of operand 2 are organized as xx:xx:hi:lo.
+;;
+;; Set bit 1 (the GT bit, 0x4) of CR register operand 0 to 1 if
+;; lo <= vv and vv <= hi. Otherwise, set the GT bit to 0. The other
+;; 3 bits of the target CR register are all set to 0.
+(define_insn "*cmprb_internal"
+ [(set (match_operand:CC 0 "cc_reg_operand" "=y")
+ (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
+ (match_operand:SI 2 "gpc_reg_operand" "r")]
+ UNSPEC_CMPRB))]
+ "TARGET_P9_MISC"
+ "cmprb %0,0,%1,%2"
+ [(set_attr "type" "logical")])
+
+;; Set operand 0 register to -1 if the LT bit (0x8) of condition
+;; register operand 1 is on. Otherwise, set operand 0 register to 1
+;; if the GT bit (0x4) of condition register operand 1 is on.
+;; Otherwise, set operand 0 to 0. Note that the result stored into
+;; register operand 0 is non-zero iff either the LT or GT bits are on
+;; within condition register operand 1.
+(define_insn "setb_signed"
+ [(set (match_operand:SI 0 "gpc_reg_operand" "=r")
+ (if_then_else:SI (lt (match_operand:CC 1 "cc_reg_operand" "y")
+ (const_int 0))
+ (const_int -1)
+ (if_then_else (gt (match_dup 1)
+ (const_int 0))
+ (const_int 1)
+ (const_int 0))))]
+ "TARGET_P9_MISC"
+ "setb %0,%1"
+ [(set_attr "type" "logical")])
+(define_insn "setb_unsigned"
+ [(set (match_operand:SI 0 "gpc_reg_operand" "=r")
+ (if_then_else:SI (ltu (match_operand:CCUNS 1 "cc_reg_operand" "y")
+ (const_int 0))
+ (const_int -1)
+ (if_then_else (gtu (match_dup 1)
+ (const_int 0))
+ (const_int 1)
+ (const_int 0))))]
+ "TARGET_P9_MISC"
+ "setb %0,%1"
+ [(set_attr "type" "logical")])
+
+;; Test byte within two ranges.
+;;
+;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
+;; represents a byte whose value is ignored in this context and
+;; vv, the least significant byte, holds the byte value that is to
+;; be tested for membership within the range specified by operand 2.
+;; The bytes of operand 2 are organized as hi_1:lo_1:hi_2:lo_2.
+;;
+;; Return in target register operand 0 a value of 1 if (lo_1 <= vv and
+;; vv <= hi_1) or if (lo_2 <= vv and vv <= hi_2). Otherwise, set register
+;; operand 0 to 0.
+;;
+;; Though the instructions to which this expansion maps operate on
+;; 64-bit registers, the current implementation only operates on
+;; SI-mode operands as the high-order bits provide no information
+;; that is not already available in the low-order bits. To avoid the
+;; costs of data widening operations, future enhancements might allow
+;; DI mode for operand 0 and/or might allow operand 1 to be QI mode.
+(define_expand "cmprb2"
+ [(set (match_dup 3)
+ (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
+ (match_operand:SI 2 "gpc_reg_operand" "r")]
+ UNSPEC_CMPRB2))
+ (set (match_operand:SI 0 "gpc_reg_operand" "=r")
+ (if_then_else:SI (lt (match_dup 3)
+ (const_int 0))
+ (const_int -1)
+ (if_then_else (gt (match_dup 3)
+ (const_int 0))
+ (const_int 1)
+ (const_int 0))))]
+ "TARGET_P9_MISC"
+{
+ operands[3] = gen_reg_rtx (CCmode);
+})
+
+;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
+;; represents a byte whose value is ignored in this context and
+;; vv, the least significant byte, holds the byte value that is to
+;; be tested for membership within the ranges specified by operand 2.
+;; The bytes of operand 2 are organized as hi_1:lo_1:hi_2:lo_2.
+;;
+;; Set bit 1 (the GT bit, 0x4) of CR register operand 0 to 1 if
+;; (lo_1 <= vv and vv <= hi_1) or if (lo_2 <= vv and vv <= hi_2).
+;; Otherwise, set the GT bit to 0. The other 3 bits of the target
+;; CR register are all set to 0.
+(define_insn "*cmprb2_internal"
+ [(set (match_operand:CC 0 "cc_reg_operand" "=y")
+ (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
+ (match_operand:SI 2 "gpc_reg_operand" "r")]
+ UNSPEC_CMPRB2))]
+ "TARGET_P9_MISC"
+ "cmprb %0,1,%1,%2"
+ [(set_attr "type" "logical")])
+
+;; Test byte membership within set of 8 bytes.
+;;
+;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
+;; represents a byte whose value is ignored in this context and
+;; vv, the least significant byte, holds the byte value that is to
+;; be tested for membership within the set specified by operand 2.
+;; The bytes of operand 2 are organized as e0:e1:e2:e3:e4:e5:e6:e7.
+;;
+;; Return in target register operand 0 a value of 1 if vv equals one
+;; of the values e0, e1, e2, e3, e4, e5, e6, or e7. Otherwise, set
+;; register operand 0 to 0. Note that the 8 byte values held within
+;; operand 2 need not be unique.
+;;
+;; Though the instructions to which this expansion maps operate on
+;; 64-bit registers, the current implementation requires that operands
+;; 0 and 1 have mode SI as the high-order bits provide no information
+;; that is not already available in the low-order bits. To avoid the
+;; costs of data widening operations, future enhancements might allow
+;; DI mode for operand 0 and/or might allow operand 1 to be QI mode.
+(define_expand "cmpeqb"
+ [(set (match_dup 3)
+ (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
+ (match_operand:DI 2 "gpc_reg_operand" "r")]
+ UNSPEC_CMPEQB))
+ (set (match_operand:SI 0 "gpc_reg_operand" "=r")
+ (if_then_else:SI (lt (match_dup 3)
+ (const_int 0))
+ (const_int -1)
+ (if_then_else (gt (match_dup 3)
+ (const_int 0))
+ (const_int 1)
+ (const_int 0))))]
+ "TARGET_P9_MISC && TARGET_64BIT"
+{
+ operands[3] = gen_reg_rtx (CCmode);
+})
+
+;; The bytes of operand 1 are organized as xx:xx:xx:vv, where xx
+;; represents a byte whose value is ignored in this context and
+;; vv, the least significant byte, holds the byte value that is to
+;; be tested for membership within the set specified by operand 2.
+;; The bytes of operand 2 are organized as e0:e1:e2:e3:e4:e5:e6:e7.
+;;
+;; Set bit 1 (the GT bit, 0x4) of CR register operand 0 to 1 if vv
+;; equals one of the values e0, e1, e2, e3, e4, e5, e6, or e7. Otherwise,
+;; set the GT bit to zero. The other 3 bits of the target CR register
+;; are all set to 0.
+(define_insn "*cmpeqb_internal"
+ [(set (match_operand:CC 0 "cc_reg_operand" "=y")
+ (unspec:CC [(match_operand:SI 1 "gpc_reg_operand" "r")
+ (match_operand:DI 2 "gpc_reg_operand" "r")]
+ UNSPEC_CMPEQB))]
+ "TARGET_P9_MISC && TARGET_64BIT"
+ "cmpeqb %0,%1,%2"
+ [(set_attr "type" "logical")])
\f
(include "sync.md")
projects / thirdparty / gcc.git / commitdiff
