local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
- -rm -f multilib.out multilib.ts multilib.tmp maybedep.tmp serdep.tmp
+ -rm -f multilib.out multilib.tmp maybedep.tmp serdep.tmp
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
.PHONY: configure-build-libiberty maybe-configure-build-libiberty
maybe-configure-build-libiberty:
-configure-build-libiberty: $(BUILD_SUBDIR)/libiberty/Makefile
-$(BUILD_SUBDIR)/libiberty/Makefile: config.status
- @[ -d $(BUILD_SUBDIR)/libiberty ] || mkdir $(BUILD_SUBDIR)/libiberty;\
+configure-build-libiberty:
+ @test ! -f $(BUILD_SUBDIR)/libiberty/Makefile || exit 0; \
+ [ -d $(BUILD_SUBDIR)/libiberty ] || \
+ mkdir $(BUILD_SUBDIR)/libiberty;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
.PHONY: configure-ash maybe-configure-ash
maybe-configure-ash:
-configure-ash: ash/Makefile
-
-ash/Makefile: config.status
- @[ -d ash ] || mkdir ash; \
+configure-ash:
+ @test ! -f ash/Makefile || exit 0; \
+ [ -d ash ] || mkdir ash; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-autoconf maybe-configure-autoconf
maybe-configure-autoconf:
-configure-autoconf: autoconf/Makefile
-
-autoconf/Makefile: config.status
- @[ -d autoconf ] || mkdir autoconf; \
+configure-autoconf:
+ @test ! -f autoconf/Makefile || exit 0; \
+ [ -d autoconf ] || mkdir autoconf; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-automake maybe-configure-automake
maybe-configure-automake:
-configure-automake: automake/Makefile
-
-automake/Makefile: config.status
- @[ -d automake ] || mkdir automake; \
+configure-automake:
+ @test ! -f automake/Makefile || exit 0; \
+ [ -d automake ] || mkdir automake; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-bash maybe-configure-bash
maybe-configure-bash:
-configure-bash: bash/Makefile
-
-bash/Makefile: config.status
- @[ -d bash ] || mkdir bash; \
+configure-bash:
+ @test ! -f bash/Makefile || exit 0; \
+ [ -d bash ] || mkdir bash; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-bfd maybe-configure-bfd
maybe-configure-bfd:
-configure-bfd: bfd/Makefile
-
-bfd/Makefile: config.status
- @[ -d bfd ] || mkdir bfd; \
+configure-bfd:
+ @test ! -f bfd/Makefile || exit 0; \
+ [ -d bfd ] || mkdir bfd; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-opcodes maybe-configure-opcodes
maybe-configure-opcodes:
-configure-opcodes: opcodes/Makefile
-
-opcodes/Makefile: config.status
- @[ -d opcodes ] || mkdir opcodes; \
+configure-opcodes:
+ @test ! -f opcodes/Makefile || exit 0; \
+ [ -d opcodes ] || mkdir opcodes; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-binutils maybe-configure-binutils
maybe-configure-binutils:
-configure-binutils: binutils/Makefile
-
-binutils/Makefile: config.status
- @[ -d binutils ] || mkdir binutils; \
+configure-binutils:
+ @test ! -f binutils/Makefile || exit 0; \
+ [ -d binutils ] || mkdir binutils; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-bison maybe-configure-bison
maybe-configure-bison:
-configure-bison: bison/Makefile
-
-bison/Makefile: config.status
- @[ -d bison ] || mkdir bison; \
+configure-bison:
+ @test ! -f bison/Makefile || exit 0; \
+ [ -d bison ] || mkdir bison; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-byacc maybe-configure-byacc
maybe-configure-byacc:
-configure-byacc: byacc/Makefile
-
-byacc/Makefile: config.status
- @[ -d byacc ] || mkdir byacc; \
+configure-byacc:
+ @test ! -f byacc/Makefile || exit 0; \
+ [ -d byacc ] || mkdir byacc; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-bzip2 maybe-configure-bzip2
maybe-configure-bzip2:
-configure-bzip2: bzip2/Makefile
-
-bzip2/Makefile: config.status
- @[ -d bzip2 ] || mkdir bzip2; \
+configure-bzip2:
+ @test ! -f bzip2/Makefile || exit 0; \
+ [ -d bzip2 ] || mkdir bzip2; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-db maybe-configure-db
maybe-configure-db:
-configure-db: db/Makefile
-
-db/Makefile: config.status
- @[ -d db ] || mkdir db; \
+configure-db:
+ @test ! -f db/Makefile || exit 0; \
+ [ -d db ] || mkdir db; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-dejagnu maybe-configure-dejagnu
maybe-configure-dejagnu:
-configure-dejagnu: dejagnu/Makefile
-
-dejagnu/Makefile: config.status
- @[ -d dejagnu ] || mkdir dejagnu; \
+configure-dejagnu:
+ @test ! -f dejagnu/Makefile || exit 0; \
+ [ -d dejagnu ] || mkdir dejagnu; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-diff maybe-configure-diff
maybe-configure-diff:
-configure-diff: diff/Makefile
-
-diff/Makefile: config.status
- @[ -d diff ] || mkdir diff; \
+configure-diff:
+ @test ! -f diff/Makefile || exit 0; \
+ [ -d diff ] || mkdir diff; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-dosutils maybe-configure-dosutils
maybe-configure-dosutils:
-configure-dosutils: dosutils/Makefile
-
-dosutils/Makefile: config.status
- @[ -d dosutils ] || mkdir dosutils; \
+configure-dosutils:
+ @test ! -f dosutils/Makefile || exit 0; \
+ [ -d dosutils ] || mkdir dosutils; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-etc maybe-configure-etc
maybe-configure-etc:
-configure-etc: etc/Makefile
-
-etc/Makefile: config.status
- @[ -d etc ] || mkdir etc; \
+configure-etc:
+ @test ! -f etc/Makefile || exit 0; \
+ [ -d etc ] || mkdir etc; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-fastjar maybe-configure-fastjar
maybe-configure-fastjar:
-configure-fastjar: fastjar/Makefile
-
-fastjar/Makefile: config.status
- @[ -d fastjar ] || mkdir fastjar; \
+configure-fastjar:
+ @test ! -f fastjar/Makefile || exit 0; \
+ [ -d fastjar ] || mkdir fastjar; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-fileutils maybe-configure-fileutils
maybe-configure-fileutils:
-configure-fileutils: fileutils/Makefile
-
-fileutils/Makefile: config.status
- @[ -d fileutils ] || mkdir fileutils; \
+configure-fileutils:
+ @test ! -f fileutils/Makefile || exit 0; \
+ [ -d fileutils ] || mkdir fileutils; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-findutils maybe-configure-findutils
maybe-configure-findutils:
-configure-findutils: findutils/Makefile
-
-findutils/Makefile: config.status
- @[ -d findutils ] || mkdir findutils; \
+configure-findutils:
+ @test ! -f findutils/Makefile || exit 0; \
+ [ -d findutils ] || mkdir findutils; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-find maybe-configure-find
maybe-configure-find:
-configure-find: find/Makefile
-
-find/Makefile: config.status
- @[ -d find ] || mkdir find; \
+configure-find:
+ @test ! -f find/Makefile || exit 0; \
+ [ -d find ] || mkdir find; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-flex maybe-configure-flex
maybe-configure-flex:
-configure-flex: flex/Makefile
-
-flex/Makefile: config.status
- @[ -d flex ] || mkdir flex; \
+configure-flex:
+ @test ! -f flex/Makefile || exit 0; \
+ [ -d flex ] || mkdir flex; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-gas maybe-configure-gas
maybe-configure-gas:
-configure-gas: gas/Makefile
-
-gas/Makefile: config.status
- @[ -d gas ] || mkdir gas; \
+configure-gas:
+ @test ! -f gas/Makefile || exit 0; \
+ [ -d gas ] || mkdir gas; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-gawk maybe-configure-gawk
maybe-configure-gawk:
-configure-gawk: gawk/Makefile
-
-gawk/Makefile: config.status
- @[ -d gawk ] || mkdir gawk; \
+configure-gawk:
+ @test ! -f gawk/Makefile || exit 0; \
+ [ -d gawk ] || mkdir gawk; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-gettext maybe-configure-gettext
maybe-configure-gettext:
-configure-gettext: gettext/Makefile
-
-gettext/Makefile: config.status
- @[ -d gettext ] || mkdir gettext; \
+configure-gettext:
+ @test ! -f gettext/Makefile || exit 0; \
+ [ -d gettext ] || mkdir gettext; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-gnuserv maybe-configure-gnuserv
maybe-configure-gnuserv:
-configure-gnuserv: gnuserv/Makefile
-
-gnuserv/Makefile: config.status
- @[ -d gnuserv ] || mkdir gnuserv; \
+configure-gnuserv:
+ @test ! -f gnuserv/Makefile || exit 0; \
+ [ -d gnuserv ] || mkdir gnuserv; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-gprof maybe-configure-gprof
maybe-configure-gprof:
-configure-gprof: gprof/Makefile
-
-gprof/Makefile: config.status
- @[ -d gprof ] || mkdir gprof; \
+configure-gprof:
+ @test ! -f gprof/Makefile || exit 0; \
+ [ -d gprof ] || mkdir gprof; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-grep maybe-configure-grep
maybe-configure-grep:
-configure-grep: grep/Makefile
-
-grep/Makefile: config.status
- @[ -d grep ] || mkdir grep; \
+configure-grep:
+ @test ! -f grep/Makefile || exit 0; \
+ [ -d grep ] || mkdir grep; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-gzip maybe-configure-gzip
maybe-configure-gzip:
-configure-gzip: gzip/Makefile
-
-gzip/Makefile: config.status
- @[ -d gzip ] || mkdir gzip; \
+configure-gzip:
+ @test ! -f gzip/Makefile || exit 0; \
+ [ -d gzip ] || mkdir gzip; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-hello maybe-configure-hello
maybe-configure-hello:
-configure-hello: hello/Makefile
-
-hello/Makefile: config.status
- @[ -d hello ] || mkdir hello; \
+configure-hello:
+ @test ! -f hello/Makefile || exit 0; \
+ [ -d hello ] || mkdir hello; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-indent maybe-configure-indent
maybe-configure-indent:
-configure-indent: indent/Makefile
-
-indent/Makefile: config.status
- @[ -d indent ] || mkdir indent; \
+configure-indent:
+ @test ! -f indent/Makefile || exit 0; \
+ [ -d indent ] || mkdir indent; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-intl maybe-configure-intl
maybe-configure-intl:
-configure-intl: intl/Makefile
-
-intl/Makefile: config.status
- @[ -d intl ] || mkdir intl; \
+configure-intl:
+ @test ! -f intl/Makefile || exit 0; \
+ [ -d intl ] || mkdir intl; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-tcl maybe-configure-tcl
maybe-configure-tcl:
-configure-tcl: tcl/Makefile
-
-tcl/Makefile: config.status
- @[ -d tcl ] || mkdir tcl; \
+configure-tcl:
+ @test ! -f tcl/Makefile || exit 0; \
+ [ -d tcl ] || mkdir tcl; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-itcl maybe-configure-itcl
maybe-configure-itcl:
-configure-itcl: itcl/Makefile
-
-itcl/Makefile: config.status
- @[ -d itcl ] || mkdir itcl; \
+configure-itcl:
+ @test ! -f itcl/Makefile || exit 0; \
+ [ -d itcl ] || mkdir itcl; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-ld maybe-configure-ld
maybe-configure-ld:
-configure-ld: ld/Makefile
-
-ld/Makefile: config.status
- @[ -d ld ] || mkdir ld; \
+configure-ld:
+ @test ! -f ld/Makefile || exit 0; \
+ [ -d ld ] || mkdir ld; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-libgui maybe-configure-libgui
maybe-configure-libgui:
-configure-libgui: libgui/Makefile
-
-libgui/Makefile: config.status
- @[ -d libgui ] || mkdir libgui; \
+configure-libgui:
+ @test ! -f libgui/Makefile || exit 0; \
+ [ -d libgui ] || mkdir libgui; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-libiberty maybe-configure-libiberty
maybe-configure-libiberty:
-configure-libiberty: libiberty/Makefile
-
-libiberty/Makefile: config.status
- @[ -d libiberty ] || mkdir libiberty; \
+configure-libiberty:
+ @test ! -f libiberty/Makefile || exit 0; \
+ [ -d libiberty ] || mkdir libiberty; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-libtool maybe-configure-libtool
maybe-configure-libtool:
-configure-libtool: libtool/Makefile
-
-libtool/Makefile: config.status
- @[ -d libtool ] || mkdir libtool; \
+configure-libtool:
+ @test ! -f libtool/Makefile || exit 0; \
+ [ -d libtool ] || mkdir libtool; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-m4 maybe-configure-m4
maybe-configure-m4:
-configure-m4: m4/Makefile
-
-m4/Makefile: config.status
- @[ -d m4 ] || mkdir m4; \
+configure-m4:
+ @test ! -f m4/Makefile || exit 0; \
+ [ -d m4 ] || mkdir m4; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-make maybe-configure-make
maybe-configure-make:
-configure-make: make/Makefile
-
-make/Makefile: config.status
- @[ -d make ] || mkdir make; \
+configure-make:
+ @test ! -f make/Makefile || exit 0; \
+ [ -d make ] || mkdir make; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-mmalloc maybe-configure-mmalloc
maybe-configure-mmalloc:
-configure-mmalloc: mmalloc/Makefile
-
-mmalloc/Makefile: config.status
- @[ -d mmalloc ] || mkdir mmalloc; \
+configure-mmalloc:
+ @test ! -f mmalloc/Makefile || exit 0; \
+ [ -d mmalloc ] || mkdir mmalloc; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-patch maybe-configure-patch
maybe-configure-patch:
-configure-patch: patch/Makefile
-
-patch/Makefile: config.status
- @[ -d patch ] || mkdir patch; \
+configure-patch:
+ @test ! -f patch/Makefile || exit 0; \
+ [ -d patch ] || mkdir patch; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-perl maybe-configure-perl
maybe-configure-perl:
-configure-perl: perl/Makefile
-
-perl/Makefile: config.status
- @[ -d perl ] || mkdir perl; \
+configure-perl:
+ @test ! -f perl/Makefile || exit 0; \
+ [ -d perl ] || mkdir perl; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-prms maybe-configure-prms
maybe-configure-prms:
-configure-prms: prms/Makefile
-
-prms/Makefile: config.status
- @[ -d prms ] || mkdir prms; \
+configure-prms:
+ @test ! -f prms/Makefile || exit 0; \
+ [ -d prms ] || mkdir prms; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-rcs maybe-configure-rcs
maybe-configure-rcs:
-configure-rcs: rcs/Makefile
-
-rcs/Makefile: config.status
- @[ -d rcs ] || mkdir rcs; \
+configure-rcs:
+ @test ! -f rcs/Makefile || exit 0; \
+ [ -d rcs ] || mkdir rcs; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-readline maybe-configure-readline
maybe-configure-readline:
-configure-readline: readline/Makefile
-
-readline/Makefile: config.status
- @[ -d readline ] || mkdir readline; \
+configure-readline:
+ @test ! -f readline/Makefile || exit 0; \
+ [ -d readline ] || mkdir readline; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-release maybe-configure-release
maybe-configure-release:
-configure-release: release/Makefile
-
-release/Makefile: config.status
- @[ -d release ] || mkdir release; \
+configure-release:
+ @test ! -f release/Makefile || exit 0; \
+ [ -d release ] || mkdir release; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-recode maybe-configure-recode
maybe-configure-recode:
-configure-recode: recode/Makefile
-
-recode/Makefile: config.status
- @[ -d recode ] || mkdir recode; \
+configure-recode:
+ @test ! -f recode/Makefile || exit 0; \
+ [ -d recode ] || mkdir recode; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-sed maybe-configure-sed
maybe-configure-sed:
-configure-sed: sed/Makefile
-
-sed/Makefile: config.status
- @[ -d sed ] || mkdir sed; \
+configure-sed:
+ @test ! -f sed/Makefile || exit 0; \
+ [ -d sed ] || mkdir sed; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-send-pr maybe-configure-send-pr
maybe-configure-send-pr:
-configure-send-pr: send-pr/Makefile
-
-send-pr/Makefile: config.status
- @[ -d send-pr ] || mkdir send-pr; \
+configure-send-pr:
+ @test ! -f send-pr/Makefile || exit 0; \
+ [ -d send-pr ] || mkdir send-pr; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-shellutils maybe-configure-shellutils
maybe-configure-shellutils:
-configure-shellutils: shellutils/Makefile
-
-shellutils/Makefile: config.status
- @[ -d shellutils ] || mkdir shellutils; \
+configure-shellutils:
+ @test ! -f shellutils/Makefile || exit 0; \
+ [ -d shellutils ] || mkdir shellutils; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-sid maybe-configure-sid
maybe-configure-sid:
-configure-sid: sid/Makefile
-
-sid/Makefile: config.status
- @[ -d sid ] || mkdir sid; \
+configure-sid:
+ @test ! -f sid/Makefile || exit 0; \
+ [ -d sid ] || mkdir sid; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-sim maybe-configure-sim
maybe-configure-sim:
-configure-sim: sim/Makefile
-
-sim/Makefile: config.status
- @[ -d sim ] || mkdir sim; \
+configure-sim:
+ @test ! -f sim/Makefile || exit 0; \
+ [ -d sim ] || mkdir sim; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-snavigator maybe-configure-snavigator
maybe-configure-snavigator:
-configure-snavigator: snavigator/Makefile
-
-snavigator/Makefile: config.status
- @[ -d snavigator ] || mkdir snavigator; \
+configure-snavigator:
+ @test ! -f snavigator/Makefile || exit 0; \
+ [ -d snavigator ] || mkdir snavigator; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-tar maybe-configure-tar
maybe-configure-tar:
-configure-tar: tar/Makefile
-
-tar/Makefile: config.status
- @[ -d tar ] || mkdir tar; \
+configure-tar:
+ @test ! -f tar/Makefile || exit 0; \
+ [ -d tar ] || mkdir tar; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-texinfo maybe-configure-texinfo
maybe-configure-texinfo:
-configure-texinfo: texinfo/Makefile
-
-texinfo/Makefile: config.status
- @[ -d texinfo ] || mkdir texinfo; \
+configure-texinfo:
+ @test ! -f texinfo/Makefile || exit 0; \
+ [ -d texinfo ] || mkdir texinfo; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-textutils maybe-configure-textutils
maybe-configure-textutils:
-configure-textutils: textutils/Makefile
-
-textutils/Makefile: config.status
- @[ -d textutils ] || mkdir textutils; \
+configure-textutils:
+ @test ! -f textutils/Makefile || exit 0; \
+ [ -d textutils ] || mkdir textutils; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-time maybe-configure-time
maybe-configure-time:
-configure-time: time/Makefile
-
-time/Makefile: config.status
- @[ -d time ] || mkdir time; \
+configure-time:
+ @test ! -f time/Makefile || exit 0; \
+ [ -d time ] || mkdir time; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-uudecode maybe-configure-uudecode
maybe-configure-uudecode:
-configure-uudecode: uudecode/Makefile
-
-uudecode/Makefile: config.status
- @[ -d uudecode ] || mkdir uudecode; \
+configure-uudecode:
+ @test ! -f uudecode/Makefile || exit 0; \
+ [ -d uudecode ] || mkdir uudecode; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-wdiff maybe-configure-wdiff
maybe-configure-wdiff:
-configure-wdiff: wdiff/Makefile
-
-wdiff/Makefile: config.status
- @[ -d wdiff ] || mkdir wdiff; \
+configure-wdiff:
+ @test ! -f wdiff/Makefile || exit 0; \
+ [ -d wdiff ] || mkdir wdiff; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-zip maybe-configure-zip
maybe-configure-zip:
-configure-zip: zip/Makefile
-
-zip/Makefile: config.status
- @[ -d zip ] || mkdir zip; \
+configure-zip:
+ @test ! -f zip/Makefile || exit 0; \
+ [ -d zip ] || mkdir zip; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-zlib maybe-configure-zlib
maybe-configure-zlib:
-configure-zlib: zlib/Makefile
-
-zlib/Makefile: config.status
- @[ -d zlib ] || mkdir zlib; \
+configure-zlib:
+ @test ! -f zlib/Makefile || exit 0; \
+ [ -d zlib ] || mkdir zlib; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-gdb maybe-configure-gdb
maybe-configure-gdb:
-configure-gdb: gdb/Makefile
-
-gdb/Makefile: config.status
- @[ -d gdb ] || mkdir gdb; \
+configure-gdb:
+ @test ! -f gdb/Makefile || exit 0; \
+ [ -d gdb ] || mkdir gdb; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-expect maybe-configure-expect
maybe-configure-expect:
-configure-expect: expect/Makefile
-
-expect/Makefile: config.status
- @[ -d expect ] || mkdir expect; \
+configure-expect:
+ @test ! -f expect/Makefile || exit 0; \
+ [ -d expect ] || mkdir expect; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-guile maybe-configure-guile
maybe-configure-guile:
-configure-guile: guile/Makefile
-
-guile/Makefile: config.status
- @[ -d guile ] || mkdir guile; \
+configure-guile:
+ @test ! -f guile/Makefile || exit 0; \
+ [ -d guile ] || mkdir guile; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-tk maybe-configure-tk
maybe-configure-tk:
-configure-tk: tk/Makefile
-
-tk/Makefile: config.status
- @[ -d tk ] || mkdir tk; \
+configure-tk:
+ @test ! -f tk/Makefile || exit 0; \
+ [ -d tk ] || mkdir tk; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-tix maybe-configure-tix
maybe-configure-tix:
-configure-tix: tix/Makefile
-
-tix/Makefile: config.status
- @[ -d tix ] || mkdir tix; \
+configure-tix:
+ @test ! -f tix/Makefile || exit 0; \
+ [ -d tix ] || mkdir tix; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-libtermcap maybe-configure-libtermcap
maybe-configure-libtermcap:
-configure-libtermcap: libtermcap/Makefile
-
-libtermcap/Makefile: config.status
- @[ -d libtermcap ] || mkdir libtermcap; \
+configure-libtermcap:
+ @test ! -f libtermcap/Makefile || exit 0; \
+ [ -d libtermcap ] || mkdir libtermcap; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-utils maybe-configure-utils
maybe-configure-utils:
-configure-utils: utils/Makefile
-
-utils/Makefile: config.status
- @[ -d utils ] || mkdir utils; \
+configure-utils:
+ @test ! -f utils/Makefile || exit 0; \
+ [ -d utils ] || mkdir utils; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
.PHONY: configure-target-libstdc++-v3 maybe-configure-target-libstdc++-v3
maybe-configure-target-libstdc++-v3:
-configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libstdc++-v3/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
+ @[ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || \
+ mkdir $(TARGET_SUBDIR)/libstdc++-v3; \
+ rm -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
-$(TARGET_SUBDIR)/libstdc++-v3/Makefile: config.status $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
- @[ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
+configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || \
+ mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-newlib maybe-configure-target-newlib
maybe-configure-target-newlib:
-configure-target-newlib: $(TARGET_SUBDIR)/newlib/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/newlib/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
+ @[ -d $(TARGET_SUBDIR)/newlib ] || \
+ mkdir $(TARGET_SUBDIR)/newlib; \
+ rm -f $(TARGET_SUBDIR)/newlib/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/newlib/multilib.out
-$(TARGET_SUBDIR)/newlib/Makefile: config.status $(TARGET_SUBDIR)/newlib/multilib.out
- @[ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
+configure-target-newlib: $(TARGET_SUBDIR)/newlib/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/newlib/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/newlib ] || \
+ mkdir $(TARGET_SUBDIR)/newlib;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libf2c maybe-configure-target-libf2c
maybe-configure-target-libf2c:
-configure-target-libf2c: $(TARGET_SUBDIR)/libf2c/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libf2c/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
+ @[ -d $(TARGET_SUBDIR)/libf2c ] || \
+ mkdir $(TARGET_SUBDIR)/libf2c; \
+ rm -f $(TARGET_SUBDIR)/libf2c/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libf2c/multilib.out
-$(TARGET_SUBDIR)/libf2c/Makefile: config.status $(TARGET_SUBDIR)/libf2c/multilib.out
- @[ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
+configure-target-libf2c: $(TARGET_SUBDIR)/libf2c/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libf2c/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libf2c ] || \
+ mkdir $(TARGET_SUBDIR)/libf2c;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libobjc maybe-configure-target-libobjc
maybe-configure-target-libobjc:
-configure-target-libobjc: $(TARGET_SUBDIR)/libobjc/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libobjc/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
+ @[ -d $(TARGET_SUBDIR)/libobjc ] || \
+ mkdir $(TARGET_SUBDIR)/libobjc; \
+ rm -f $(TARGET_SUBDIR)/libobjc/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libobjc/multilib.out
-$(TARGET_SUBDIR)/libobjc/Makefile: config.status $(TARGET_SUBDIR)/libobjc/multilib.out
- @[ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
+configure-target-libobjc: $(TARGET_SUBDIR)/libobjc/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libobjc/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libobjc ] || \
+ mkdir $(TARGET_SUBDIR)/libobjc;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libtermcap maybe-configure-target-libtermcap
maybe-configure-target-libtermcap:
-configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libtermcap/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
+ @[ -d $(TARGET_SUBDIR)/libtermcap ] || \
+ mkdir $(TARGET_SUBDIR)/libtermcap; \
+ rm -f $(TARGET_SUBDIR)/libtermcap/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libtermcap/multilib.out
-$(TARGET_SUBDIR)/libtermcap/Makefile: config.status $(TARGET_SUBDIR)/libtermcap/multilib.out
- @[ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
+configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libtermcap/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libtermcap ] || \
+ mkdir $(TARGET_SUBDIR)/libtermcap;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-winsup maybe-configure-target-winsup
maybe-configure-target-winsup:
-configure-target-winsup: $(TARGET_SUBDIR)/winsup/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/winsup/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
+ @[ -d $(TARGET_SUBDIR)/winsup ] || \
+ mkdir $(TARGET_SUBDIR)/winsup; \
+ rm -f $(TARGET_SUBDIR)/winsup/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/winsup/multilib.out
-$(TARGET_SUBDIR)/winsup/Makefile: config.status $(TARGET_SUBDIR)/winsup/multilib.out
- @[ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
+configure-target-winsup: $(TARGET_SUBDIR)/winsup/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/winsup/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/winsup ] || \
+ mkdir $(TARGET_SUBDIR)/winsup;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libgloss maybe-configure-target-libgloss
maybe-configure-target-libgloss:
-configure-target-libgloss: $(TARGET_SUBDIR)/libgloss/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libgloss/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
+ @[ -d $(TARGET_SUBDIR)/libgloss ] || \
+ mkdir $(TARGET_SUBDIR)/libgloss; \
+ rm -f $(TARGET_SUBDIR)/libgloss/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libgloss/multilib.out
-$(TARGET_SUBDIR)/libgloss/Makefile: config.status $(TARGET_SUBDIR)/libgloss/multilib.out
- @[ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
+configure-target-libgloss: $(TARGET_SUBDIR)/libgloss/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libgloss/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libgloss ] || \
+ mkdir $(TARGET_SUBDIR)/libgloss;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libiberty maybe-configure-target-libiberty
maybe-configure-target-libiberty:
-configure-target-libiberty: $(TARGET_SUBDIR)/libiberty/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libiberty/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
+ @[ -d $(TARGET_SUBDIR)/libiberty ] || \
+ mkdir $(TARGET_SUBDIR)/libiberty; \
+ rm -f $(TARGET_SUBDIR)/libiberty/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libiberty/multilib.out
-$(TARGET_SUBDIR)/libiberty/Makefile: config.status $(TARGET_SUBDIR)/libiberty/multilib.out
- @[ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
+configure-target-libiberty: $(TARGET_SUBDIR)/libiberty/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libiberty/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libiberty ] || \
+ mkdir $(TARGET_SUBDIR)/libiberty;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-gperf maybe-configure-target-gperf
maybe-configure-target-gperf:
-configure-target-gperf: $(TARGET_SUBDIR)/gperf/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/gperf/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
+ @[ -d $(TARGET_SUBDIR)/gperf ] || \
+ mkdir $(TARGET_SUBDIR)/gperf; \
+ rm -f $(TARGET_SUBDIR)/gperf/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/gperf/multilib.out
-$(TARGET_SUBDIR)/gperf/Makefile: config.status $(TARGET_SUBDIR)/gperf/multilib.out
- @[ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
+configure-target-gperf: $(TARGET_SUBDIR)/gperf/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/gperf/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/gperf ] || \
+ mkdir $(TARGET_SUBDIR)/gperf;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-examples maybe-configure-target-examples
maybe-configure-target-examples:
-configure-target-examples: $(TARGET_SUBDIR)/examples/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/examples/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
+ @[ -d $(TARGET_SUBDIR)/examples ] || \
+ mkdir $(TARGET_SUBDIR)/examples; \
+ rm -f $(TARGET_SUBDIR)/examples/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/examples/multilib.out
-$(TARGET_SUBDIR)/examples/Makefile: config.status $(TARGET_SUBDIR)/examples/multilib.out
- @[ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
+configure-target-examples: $(TARGET_SUBDIR)/examples/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/examples/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/examples ] || \
+ mkdir $(TARGET_SUBDIR)/examples;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libffi maybe-configure-target-libffi
maybe-configure-target-libffi:
-configure-target-libffi: $(TARGET_SUBDIR)/libffi/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libffi/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
+ @[ -d $(TARGET_SUBDIR)/libffi ] || \
+ mkdir $(TARGET_SUBDIR)/libffi; \
+ rm -f $(TARGET_SUBDIR)/libffi/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libffi/multilib.out
-$(TARGET_SUBDIR)/libffi/Makefile: config.status $(TARGET_SUBDIR)/libffi/multilib.out
- @[ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
+configure-target-libffi: $(TARGET_SUBDIR)/libffi/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libffi/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libffi ] || \
+ mkdir $(TARGET_SUBDIR)/libffi;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-libjava maybe-configure-target-libjava
maybe-configure-target-libjava:
-configure-target-libjava: $(TARGET_SUBDIR)/libjava/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/libjava/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
+ @[ -d $(TARGET_SUBDIR)/libjava ] || \
+ mkdir $(TARGET_SUBDIR)/libjava; \
+ rm -f $(TARGET_SUBDIR)/libjava/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/libjava/multilib.out
-$(TARGET_SUBDIR)/libjava/Makefile: config.status $(TARGET_SUBDIR)/libjava/multilib.out
- @[ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
+configure-target-libjava: $(TARGET_SUBDIR)/libjava/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/libjava/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/libjava ] || \
+ mkdir $(TARGET_SUBDIR)/libjava;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-zlib maybe-configure-target-zlib
maybe-configure-target-zlib:
-configure-target-zlib: $(TARGET_SUBDIR)/zlib/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/zlib/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
+ @[ -d $(TARGET_SUBDIR)/zlib ] || \
+ mkdir $(TARGET_SUBDIR)/zlib; \
+ rm -f $(TARGET_SUBDIR)/zlib/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/zlib/multilib.out
-$(TARGET_SUBDIR)/zlib/Makefile: config.status $(TARGET_SUBDIR)/zlib/multilib.out
- @[ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
+configure-target-zlib: $(TARGET_SUBDIR)/zlib/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/zlib/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/zlib ] || \
+ mkdir $(TARGET_SUBDIR)/zlib;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-boehm-gc maybe-configure-target-boehm-gc
maybe-configure-target-boehm-gc:
-configure-target-boehm-gc: $(TARGET_SUBDIR)/boehm-gc/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/boehm-gc/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
+ @[ -d $(TARGET_SUBDIR)/boehm-gc ] || \
+ mkdir $(TARGET_SUBDIR)/boehm-gc; \
+ rm -f $(TARGET_SUBDIR)/boehm-gc/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/boehm-gc/multilib.out
-$(TARGET_SUBDIR)/boehm-gc/Makefile: config.status $(TARGET_SUBDIR)/boehm-gc/multilib.out
- @[ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
+configure-target-boehm-gc: $(TARGET_SUBDIR)/boehm-gc/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/boehm-gc/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/boehm-gc ] || \
+ mkdir $(TARGET_SUBDIR)/boehm-gc;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-qthreads maybe-configure-target-qthreads
maybe-configure-target-qthreads:
-configure-target-qthreads: $(TARGET_SUBDIR)/qthreads/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/qthreads/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
+ @[ -d $(TARGET_SUBDIR)/qthreads ] || \
+ mkdir $(TARGET_SUBDIR)/qthreads; \
+ rm -f $(TARGET_SUBDIR)/qthreads/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/qthreads/multilib.out
-$(TARGET_SUBDIR)/qthreads/Makefile: config.status $(TARGET_SUBDIR)/qthreads/multilib.out
- @[ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
+configure-target-qthreads: $(TARGET_SUBDIR)/qthreads/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/qthreads/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/qthreads ] || \
+ mkdir $(TARGET_SUBDIR)/qthreads;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
.PHONY: configure-target-rda maybe-configure-target-rda
maybe-configure-target-rda:
-configure-target-rda: $(TARGET_SUBDIR)/rda/Makefile
# There's only one multilib.out. Cleverer subdirs shouldn't need it copied.
$(TARGET_SUBDIR)/rda/multilib.out: multilib.out
- @[ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
+ @[ -d $(TARGET_SUBDIR)/rda ] || \
+ mkdir $(TARGET_SUBDIR)/rda; \
+ rm -f $(TARGET_SUBDIR)/rda/Makefile || : ; \
cp multilib.out $(TARGET_SUBDIR)/rda/multilib.out
-$(TARGET_SUBDIR)/rda/Makefile: config.status $(TARGET_SUBDIR)/rda/multilib.out
- @[ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
+configure-target-rda: $(TARGET_SUBDIR)/rda/multilib.out
+ @test ! -f $(TARGET_SUBDIR)/rda/Makefile || exit 0; \
+ [ -d $(TARGET_SUBDIR)/rda ] || \
+ mkdir $(TARGET_SUBDIR)/rda;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: configure-gcc maybe-configure-gcc
maybe-configure-gcc:
-configure-gcc: gcc/Makefile
-
-gcc/Makefile: config.status
- @[ -d gcc ] || mkdir gcc; \
+configure-gcc:
+ @test ! -f gcc/Makefile || exit 0; \
+ [ -d gcc ] || mkdir gcc; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
CC="$(CC)"; export CC; \
# work around various timestamp bugs on some systems.
# We use move-if-change so that it's only considered updated when it
# actually changes, because it has to depend on a phony target.
-multilib.out: multilib.ts
- @if [ -f multilib.out ] ; then : else \
- rm -f multilib.ts; $(MAKE) multilib.ts; \
- fi
-
-multilib.ts: maybe-all-gcc
+multilib.out: maybe-all-gcc
@r=`${PWD}`; export r; \
echo "Checking multilib configuration..."; \
$(CC_FOR_TARGET) --print-multi-lib > multilib.tmp 2> /dev/null ; \
$(SHELL) $(srcdir)/move-if-change multilib.tmp multilib.out ; \
- echo timestamp > multilib.ts
# Rebuilding Makefile.in, using autogen.
AUTOGEN = autogen
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --disable-serial-[{host,target,build}-]configure
+ Don't force sequential configuration of
+ sub-packages for the host, target or build
+ machine, or of any sub-packages at all"
# Initialize some variables set by options.
# The variables have the same names as the options, with
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:572: checking host system type" >&5
+echo "configure:577: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:593: checking target system type" >&5
+echo "configure:598: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:611: checking build system type" >&5
+echo "configure:616: checking build system type" >&5
build_alias=$build
case "$build_alias" in
;;
* )
# Add to all subconfigure arguments: build, host, and target.
- ac_configure_args="--with-gcc-version-trigger=$gcc_version_trigger $ac_configure_args"
+ ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
;;
esac
fi
# Create the 'maybe dependencies'. This uses a temporary file.
rm -f maybedep.tmp
+echo '# maybedep.tmp' > maybedep.tmp
for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
${install_host_modules} ${install_target_modules} \
${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
# Create the serialization dependencies. This uses a temporary file.
+# Check whether --enable-serial-configure or --disable-serial-configure was given.
+if test "${enable_serial_configure+set}" = set; then
+ enableval="$enable_serial_configure"
+ :
+fi
+
+
# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xno ||
for item in ${build_configdirs} ; do
case ${olditem} in
"") ;;
- *) echo "\$(BUILD_SUBDIR)/${item}/Makefile: \$(BUILD_SUBDIR)/${olditem}/Makefile" >> serdep.tmp ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xno ||
for item in ${configdirs} ; do
case ${olditem} in
"") ;;
- *) echo "${item}/Makefile: ${olditem}/Makefile" >> serdep.tmp ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
olditem=
+test "x${enable_serial_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xno ||
for item in ${target_configdirs} ; do
case ${olditem} in
"") ;;
- *) echo "\$(TARGET_SUBDIR)/${item}/Makefile: \$(TARGET_SUBDIR)/${olditem}/Makefile" >> serdep.tmp ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
esac
olditem=${item}
done
serialization_dependencies=serdep.tmp
-# Base args. Strip norecursion, cache-file, srcdir, host, build, target.
-# These are the ones we might not want to pass down to subconfigures.
-baseargs=`echo "${ac_configure_args}" | \
- sed -e 's/--no[^ ]*//' \
- -e 's/--cache[a-z-]*=[^ ]*//' \
- -e 's/--sr[a-z-]*=[^ ]*//' \
- -e 's/--ho[a-z-]*=[^ ]*//' \
- -e 's/--bu[a-z-]*=[^ ]*//' \
- -e 's/--ta[a-z-]*=[^ ]*//'`
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target and nonopt. These are the ones we might not want to pass
+# down to subconfigures.
+baseargs=`echo " ${ac_configure_args} " | \
+ sed -e 's/ --no[^ ]* / /' \
+ -e 's/ --cache[a-z-]*=[^ ]* / /' \
+ -e 's/ --sr[a-z-]*=[^ ]* / /' \
+ -e 's/ --ho[a-z-]*=[^ ]* / /' \
+ -e 's/ --bu[a-z-]*=[^ ]* / /' \
+ -e 's/ --ta[a-z-]*=[^ ]* / /' \
+ -e 's/ [^-][^ ]* / /' \
+ -e 's/^ *//;s/ *$//'`
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2665: checking for $ac_word" >&5
+echo "configure:2688: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2698: checking for $ac_word" >&5
+echo "configure:2721: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2737: checking for $ac_word" >&5
+echo "configure:2760: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2770: checking for $ac_word" >&5
+echo "configure:2793: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2809: checking for $ac_word" >&5
+echo "configure:2832: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2842: checking for $ac_word" >&5
+echo "configure:2865: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2881: checking for $ac_word" >&5
+echo "configure:2904: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2914: checking for $ac_word" >&5
+echo "configure:2937: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2953: checking for $ac_word" >&5
+echo "configure:2976: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2986: checking for $ac_word" >&5
+echo "configure:3009: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3025: checking for $ac_word" >&5
+echo "configure:3048: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3058: checking for $ac_word" >&5
+echo "configure:3081: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3097: checking for $ac_word" >&5
+echo "configure:3120: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3130: checking for $ac_word" >&5
+echo "configure:3153: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3169: checking for $ac_word" >&5
+echo "configure:3192: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3202: checking for $ac_word" >&5
+echo "configure:3225: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3241: checking for $ac_word" >&5
+echo "configure:3264: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3274: checking for $ac_word" >&5
+echo "configure:3297: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3322: checking for $ac_word" >&5
+echo "configure:3345: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3355: checking for $ac_word" >&5
+echo "configure:3378: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3394: checking for $ac_word" >&5
+echo "configure:3417: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3427: checking for $ac_word" >&5
+echo "configure:3450: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3466: checking for $ac_word" >&5
+echo "configure:3489: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3499: checking for $ac_word" >&5
+echo "configure:3522: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3538: checking for $ac_word" >&5
+echo "configure:3561: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3571: checking for $ac_word" >&5
+echo "configure:3594: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3610: checking for $ac_word" >&5
+echo "configure:3633: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3643: checking for $ac_word" >&5
+echo "configure:3666: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3682: checking for $ac_word" >&5
+echo "configure:3705: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3715: checking for $ac_word" >&5
+echo "configure:3738: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3754: checking for $ac_word" >&5
+echo "configure:3777: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3787: checking for $ac_word" >&5
+echo "configure:3810: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
projects / thirdparty / gcc.git / commitdiff
