Whether to print the diffstat between ORIG_HEAD and the merge result
at the end of the merge. True by default.
+merge.autoStash::
+ When set to true, automatically create a temporary stash entry
+ before the operation begins, and apply it after the operation
+ ends. This means that you can run merge on a dirty worktree.
+ However, use with care: the final stash application after a
+ successful merge might result in non-trivial conflicts.
+ This option can be overridden by the `--no-autostash` and
+ `--autostash` options of linkgit:git-merge[1].
+ Defaults to false.
+
merge.tool::
Controls which merge tool is used by linkgit:git-mergetool[1].
The list below shows the valid built-in values.
--abort::
Abort the current conflict resolution process, and
- try to reconstruct the pre-merge state.
+ try to reconstruct the pre-merge state. If an autostash entry is
+ present, apply it to the worktree.
+
If there were uncommitted worktree changes present when the merge
started, 'git merge --abort' will in some cases be unable to
commit or stash your changes before running 'git merge'.
+
'git merge --abort' is equivalent to 'git reset --merge' when
-`MERGE_HEAD` is present.
+`MERGE_HEAD` is present unless `MERGE_AUTOSTASH` is also present in
+which case 'git merge --abort' applies the stash entry to the worktree
+whereas 'git reset --merge' will save the stashed changes in the stash
+reflog.
--quit::
Forget about the current merge in progress. Leave the index
- and the working tree as-is.
+ and the working tree as-is. If `MERGE_AUTOSTASH` is present, the
+ stash entry will be saved to the stash reflog.
--continue::
After a 'git merge' stops due to conflicts you can conclude the
Note that not all merge strategies may support progress
reporting.
+--autostash::
+--no-autostash::
+ Automatically create a temporary stash entry before the operation
+ begins, and apply it after the operation ends. This means
+ that you can run the operation on a dirty worktree. However, use
+ with care: the final stash application after a successful
+ merge might result in non-trivial conflicts.
+
endif::git-pull[]
--allow-unrelated-histories::
unlink(git_path_merge_rr(r));
unlink(git_path_merge_msg(r));
unlink(git_path_merge_mode(r));
+ save_autostash(git_path_merge_autostash(r));
}
void remove_branch_state(struct repository *r, int verbose)
&oid, flags);
}
+ apply_autostash(git_path_merge_autostash(the_repository));
+
UNLEAK(err);
UNLEAK(sb);
return 0;
static int default_to_upstream = 1;
static int signoff;
static const char *sign_commit;
+static int autostash;
static int no_verify;
static struct strategy all_strategy[] = {
OPT_SET_INT(0, "progress", &show_progress, N_("force progress reporting"), 1),
{ OPTION_STRING, 'S', "gpg-sign", &sign_commit, N_("key-id"),
N_("GPG sign commit"), PARSE_OPT_OPTARG, NULL, (intptr_t) "" },
+ OPT_AUTOSTASH(&autostash),
OPT_BOOL(0, "overwrite-ignore", &overwrite_ignore, N_("update ignored files (default)")),
OPT_BOOL(0, "signoff", &signoff, N_("add Signed-off-by:")),
OPT_BOOL(0, "no-verify", &no_verify, N_("bypass pre-merge-commit and commit-msg hooks")),
/* Run a post-merge hook */
run_hook_le(NULL, "post-merge", squash ? "1" : "0", NULL);
+ apply_autostash(git_path_merge_autostash(the_repository));
strbuf_release(&reflog_message);
}
return 0;
} else if (!strcmp(k, "gpg.mintrustlevel")) {
check_trust_level = 0;
+ } else if (!strcmp(k, "merge.autostash")) {
+ autostash = git_config_bool(k, v);
+ return 0;
}
status = fmt_merge_msg_config(k, v, cb);
if (abort_current_merge) {
int nargc = 2;
const char *nargv[] = {"reset", "--merge", NULL};
+ struct strbuf stash_oid = STRBUF_INIT;
if (orig_argc != 2)
usage_msg_opt(_("--abort expects no arguments"),
if (!file_exists(git_path_merge_head(the_repository)))
die(_("There is no merge to abort (MERGE_HEAD missing)."));
+ if (read_oneliner(&stash_oid, git_path_merge_autostash(the_repository),
+ READ_ONELINER_SKIP_IF_EMPTY))
+ unlink(git_path_merge_autostash(the_repository));
+
/* Invoke 'git reset --merge' */
ret = cmd_reset(nargc, nargv, prefix);
+
+ if (stash_oid.len)
+ apply_autostash_oid(stash_oid.buf);
+
+ strbuf_release(&stash_oid);
goto done;
}
goto done;
}
+ if (autostash)
+ create_autostash(the_repository,
+ git_path_merge_autostash(the_repository),
+ "merge");
if (checkout_fast_forward(the_repository,
&head_commit->object.oid,
&commit->object.oid,
if (fast_forward == FF_ONLY)
die(_("Not possible to fast-forward, aborting."));
+ if (autostash)
+ create_autostash(the_repository,
+ git_path_merge_autostash(the_repository),
+ "merge");
+
/* We are going to make a new commit. */
git_committer_info(IDENT_STRICT);
{ OPTION_STRING, 'S', "gpg-sign", &gpg_sign, N_("key-id"),
N_("GPG-sign commits"),
PARSE_OPT_OPTARG, NULL, (intptr_t) "" },
- OPT_BOOL(0, "autostash", &options.autostash,
- N_("automatically stash/stash pop before and after")),
+ OPT_AUTOSTASH(&options.autostash),
OPT_STRING_LIST('x', "exec", &exec, N_("exec"),
N_("add exec lines after each commit of the "
"editable list")),
#define OPT_CLEANUP(v) OPT_STRING(0, "cleanup", v, N_("mode"), N_("how to strip spaces and #comments from message"))
#define OPT_PATHSPEC_FROM_FILE(v) OPT_FILENAME(0, "pathspec-from-file", v, N_("read pathspec from file"))
#define OPT_PATHSPEC_FILE_NUL(v) OPT_BOOL(0, "pathspec-file-nul", v, N_("with --pathspec-from-file, pathspec elements are separated with NUL character"))
+#define OPT_AUTOSTASH(v) OPT_BOOL(0, "autostash", v, N_("automatically stash/stash pop before and after"))
#endif
REPO_GIT_PATH_FUNC(merge_rr, "MERGE_RR")
REPO_GIT_PATH_FUNC(merge_mode, "MERGE_MODE")
REPO_GIT_PATH_FUNC(merge_head, "MERGE_HEAD")
+REPO_GIT_PATH_FUNC(merge_autostash, "MERGE_AUTOSTASH")
REPO_GIT_PATH_FUNC(fetch_head, "FETCH_HEAD")
REPO_GIT_PATH_FUNC(shallow, "shallow")
const char *merge_rr;
const char *merge_mode;
const char *merge_head;
+ const char *merge_autostash;
const char *fetch_head;
const char *shallow;
};
-#define PATH_CACHE_INIT { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL }
+#define PATH_CACHE_INIT { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL }
const char *git_path_cherry_pick_head(struct repository *r);
const char *git_path_revert_head(struct repository *r);
const char *git_path_merge_rr(struct repository *r);
const char *git_path_merge_mode(struct repository *r);
const char *git_path_merge_head(struct repository *r);
+const char *git_path_merge_autostash(struct repository *r);
const char *git_path_fetch_head(struct repository *r);
const char *git_path_shallow(struct repository *r);
test_must_fail git merge five
'
+test_expect_success 'refuse two-project merge by default, quit before --autostash happens' '
+ t3033_reset &&
+ git reset --hard four &&
+ echo change >>one.t &&
+ git diff >expect &&
+ test_must_fail git merge --autostash five 2>err &&
+ test_i18ngrep ! "stash" err &&
+ git diff >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'two-project merge with --allow-unrelated-histories' '
t3033_reset &&
git reset --hard four &&
git diff --exit-code five
'
+test_expect_success 'two-project merge with --allow-unrelated-histories with --autostash' '
+ t3033_reset &&
+ git reset --hard four &&
+ echo change >>one.t &&
+ git diff one.t >expect &&
+ git merge --allow-unrelated-histories --autostash five 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ git diff one.t >actual &&
+ test_cmp expect actual
+'
+
test_done
. "$TEST_DIRECTORY"/lib-gpg.sh
test_write_lines 1 2 3 4 5 6 7 8 9 >file
+cp file file.orig
test_write_lines '1 X' 2 3 4 5 6 7 8 9 >file.1
+test_write_lines 1 2 '3 X' 4 5 6 7 8 9 >file.3
test_write_lines 1 2 3 4 '5 X' 6 7 8 9 >file.5
test_write_lines 1 2 3 4 5 6 7 8 '9 X' >file.9
test_write_lines 1 2 3 4 5 6 7 8 '9 Y' >file.9y
test_write_lines '1 X' 2 3 4 5 6 7 8 9 >result.1
test_write_lines '1 X' 2 3 4 '5 X' 6 7 8 9 >result.1-5
+test_write_lines '1 X' 2 3 4 5 6 7 8 '9 X' >result.1-9
test_write_lines '1 X' 2 3 4 '5 X' 6 7 8 '9 X' >result.1-5-9
+test_write_lines '1 X' 2 '3 X' 4 '5 X' 6 7 8 '9 X' >result.1-3-5-9
test_write_lines 1 2 3 4 5 6 7 8 '9 Z' >result.9z
create_merge_msgs () {
git merge c3
'
+test_expect_success 'merge with --autostash' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9 &&
+ git merge --autostash c2 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ git show HEAD:file >merge-result &&
+ test_cmp result.1-5 merge-result &&
+ test_cmp result.1-5-9 file
+'
+
+test_expect_success 'merge with merge.autoStash' '
+ test_config merge.autoStash true &&
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9 &&
+ git merge c2 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ git show HEAD:file >merge-result &&
+ test_cmp result.1-5 merge-result &&
+ test_cmp result.1-5-9 file
+'
+
+test_expect_success 'fast-forward merge with --autostash' '
+ git reset --hard c0 &&
+ git merge-file file file.orig file.5 &&
+ git merge --autostash c1 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ test_cmp result.1-5 file
+'
+
+test_expect_success 'octopus merge with --autostash' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.3 &&
+ git merge --autostash c2 c3 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ git show HEAD:file >merge-result &&
+ test_cmp result.1-5-9 merge-result &&
+ test_cmp result.1-3-5-9 file
+'
+
+test_expect_success 'conflicted merge with --autostash, --abort restores stash' '
+ git reset --hard c3 &&
+ cp file.1 file &&
+ test_must_fail git merge --autostash c7 &&
+ git merge --abort 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ test_cmp file.1 file
+'
+
+test_expect_success 'completed merge (git commit) with --no-commit and --autostash' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9 &&
+ git diff >expect &&
+ git merge --no-commit --autostash c2 &&
+ git stash show -p MERGE_AUTOSTASH >actual &&
+ test_cmp expect actual &&
+ git commit 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ git show HEAD:file >merge-result &&
+ test_cmp result.1-5 merge-result &&
+ test_cmp result.1-5-9 file
+'
+
+test_expect_success 'completed merge (git merge --continue) with --no-commit and --autostash' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9 &&
+ git diff >expect &&
+ git merge --no-commit --autostash c2 &&
+ git stash show -p MERGE_AUTOSTASH >actual &&
+ test_cmp expect actual &&
+ git merge --continue 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ git show HEAD:file >merge-result &&
+ test_cmp result.1-5 merge-result &&
+ test_cmp result.1-5-9 file
+'
+
+test_expect_success 'aborted merge (merge --abort) with --no-commit and --autostash' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9 &&
+ git diff >expect &&
+ git merge --no-commit --autostash c2 &&
+ git stash show -p MERGE_AUTOSTASH >actual &&
+ test_cmp expect actual &&
+ git merge --abort 2>err &&
+ test_i18ngrep "Applied autostash." err &&
+ git diff >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'aborted merge (reset --hard) with --no-commit and --autostash' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9 &&
+ git diff >expect &&
+ git merge --no-commit --autostash c2 &&
+ git stash show -p MERGE_AUTOSTASH >actual &&
+ test_cmp expect actual &&
+ git reset --hard 2>err &&
+ test_i18ngrep "Autostash exists; creating a new stash entry." err &&
+ git diff --exit-code
+'
+
+test_expect_success 'quit merge with --no-commit and --autostash' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9 &&
+ git diff >expect &&
+ git merge --no-commit --autostash c2 &&
+ git stash show -p MERGE_AUTOSTASH >actual &&
+ test_cmp expect actual &&
+ git diff HEAD >expect &&
+ git merge --quit 2>err &&
+ test_i18ngrep "Autostash exists; creating a new stash entry." err &&
+ git diff HEAD >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'merge with conflicted --autostash changes' '
+ git reset --hard c1 &&
+ git merge-file file file.orig file.9y &&
+ git diff >expect &&
+ test_when_finished "test_might_fail git stash drop" &&
+ git merge --autostash c3 2>err &&
+ test_i18ngrep "Applying autostash resulted in conflicts." err &&
+ git show HEAD:file >merge-result &&
+ test_cmp result.1-9 merge-result &&
+ git stash show -p >actual &&
+ test_cmp expect actual
+'
+
cat >expected.branch <<\EOF
Merge branch 'c5-branch' (early part)
EOF
projects / thirdparty / git.git / commitdiff
