For shell scripts specifically (not exhaustive):
+ - We use tabs for indentation.
+
+ - Case arms are indented at the same depth as case and esac lines.
+
- We prefer $( ... ) for command substitution; unlike ``, it
properly nests. It should have been the way Bourne spelled
it from day one, but unfortunately isn't.
- - We use ${parameter-word} and its [-=?+] siblings, and their
- colon'ed "unset or null" form.
+ - We use POSIX compliant parameter substitutions and avoid bashisms;
+ namely:
- - We use ${parameter#word} and its [#%] siblings, and their
- doubled "longest matching" form.
+ - We use ${parameter-word} and its [-=?+] siblings, and their
+ colon'ed "unset or null" form.
- - We use Arithmetic Expansion $(( ... )).
+ - We use ${parameter#word} and its [#%] siblings, and their
+ doubled "longest matching" form.
- - No "Substring Expansion" ${parameter:offset:length}.
+ - No "Substring Expansion" ${parameter:offset:length}.
- - No shell arrays.
+ - No shell arrays.
- - No strlen ${#parameter}.
+ - No strlen ${#parameter}.
+
+ - No pattern replacement ${parameter/pattern/string}.
+
+ - We use Arithmetic Expansion $(( ... )).
- - No regexp ${parameter/pattern/string}.
+ - Inside Arithmetic Expansion, spell shell variables with $ in front
+ of them, as some shells do not grok $((x)) while accepting $(($x))
+ just fine (e.g. dash older than 0.5.4).
- We do not use Process Substitution <(list) or >(list).
--- /dev/null
+Git v1.7.0.8 Release Notes
+==========================
+
+This is primarily to backport support for the new "add.ignoreErrors"
+name given to the existing "add.ignore-errors" configuration variable.
+
+The next version, Git 1.7.4, and future versions, will support both
+old and incorrect name and the new corrected name, but without this
+backport, users who want to use the new name "add.ignoreErrors" in
+their repositories cannot use older versions of Git.
--- /dev/null
+Git v1.7.1.3 Release Notes
+==========================
+
+This is primarily to backport support for the new "add.ignoreErrors"
+name given to the existing "add.ignore-errors" configuration variable.
+
+The next version, Git 1.7.4, and future versions, will support both
+old and incorrect name and the new corrected name, but without this
+backport, users who want to use the new name "add.ignoreErrors" in
+their repositories cannot use older versions of Git.
--- /dev/null
+Git v1.7.2.4 Release Notes
+==========================
+
+This is primarily to backport support for the new "add.ignoreErrors"
+name given to the existing "add.ignore-errors" configuration variable.
+
+The next version, Git 1.7.4, and future versions, will support both
+old and incorrect name and the new corrected name, but without this
+backport, users who want to use the new name "add.ignoreErrors" in
+their repositories cannot use older versions of Git.
--- /dev/null
+Git v1.7.3.1 Release Notes
+==========================
+
+Fixes since v1.7.3
+------------------
+
+ * "git stash show stash@{$n}" was accidentally broken in 1.7.3 ("git
+ stash show" without any argument still worked, though).
+
+ * "git stash branch $branch stash@{$n}" was accidentally broken in
+ 1.7.3 and started dropping the named stash even when branch creation
+ failed.
+
+And other minor fixes and documentation updates.
--- /dev/null
+Git v1.7.3.2 Release Notes
+==========================
+
+This is primarily to push out many documentation fixes accumulated since
+the 1.7.3.1 release.
--- /dev/null
+Git v1.7.3.3 Release Notes
+==========================
+
+In addition to the usual fixes, this release also includes support for
+the new "add.ignoreErrors" name given to the existing "add.ignore-errors"
+configuration variable.
+
+The next version, Git 1.7.4, and future versions, will support both
+old and incorrect name and the new corrected name, but without this
+backport, users who want to use the new name "add.ignoreErrors" in
+their repositories cannot use older versions of Git.
+
+Fixes since v1.7.3.2
+--------------------
+
+ * "git apply" segfaulted when a bogus input is fed to it.
+
+ * Running "git cherry-pick --ff" on a root commit segfaulted.
+
+ * "diff", "blame" and friends incorrectly applied textconv filters to
+ symlinks.
+
+ * Highlighting of whitespace breakage in "diff" output was showing
+ incorrect amount of whitespaces when blank-at-eol is set and the line
+ consisted only of whitespaces and a TAB.
+
+ * "diff" was overly inefficient when trying to find the line to use for
+ the function header (i.e. equivalent to --show-c-function of GNU diff).
+
+ * "git imap-send" depends on libcrypto but our build rule relied on the
+ linker to implicitly link it via libssl, which was wrong.
+
+ * "git merge-file" can be called from within a subdirectory now.
+
+ * "git repack -f" expanded and recompressed non-delta objects in the
+ existing pack, which was wasteful. Use new "-F" option if you really
+ want to (e.g. when changing the pack.compression level).
+
+ * "git rev-list --format="...%x00..." incorrectly chopped its output
+ at NUL.
+
+ * "git send-email" did not correctly remove duplicate mail addresses from
+ the Cc: header that appear on the To: header.
+
+ * The completion script (in contrib/completion) ignored lightweight tags
+ in __git_ps1().
+
+ * "git-blame" mode (in contrib/emacs) didn't say (require 'format-spec)
+ even though it depends on it; it didn't work with Emacs 22 or older
+ unless Gnus is used.
+
+ * "git-p4" (in contrib/) did not correctly handle deleted files.
+
+Other minor fixes and documentation updates are also included.
Also notice that a real name is used in the Signed-off-by: line. Please
don't hide your real name.
-Some people also put extra tags at the end.
-
-"Acked-by:" says that the patch was reviewed by the person who
-is more familiar with the issues and the area the patch attempts
-to modify. "Tested-by:" says the patch was tested by the person
-and found to have the desired effect.
+If you like, you can put extra tags at the end:
+
+1. "Reported-by:" is used to to credit someone who found the bug that
+ the patch attempts to fix.
+2. "Acked-by:" says that the person who is more familiar with the area
+ the patch attempts to modify liked the patch.
+3. "Reviewed-by:", unlike the other tags, can only be offered by the
+ reviewer and means that she is completely satisfied that the patch
+ is ready for application. It is usually offered only after a
+ detailed review.
+4. "Tested-by:" is used to indicate that the person applied the patch
+ and found it to have the desired effect.
+
+You can also create your own tag or use one that's in common usage
+such as "Thanks-to:", "Based-on-patch-by:", or "Mentored-by:".
------------------------------------------------
An ideal patch flow
linkgit:git-read-tree[1] for more information.
add.ignore-errors::
+add.ignoreErrors::
Tells 'git add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
- option of linkgit:git-add[1].
+ option of linkgit:git-add[1]. Older versions of git accept only
+ `add.ignore-errors`, which does not follow the usual naming
+ convention for configuration variables. Newer versions of git
+ honor `add.ignoreErrors` as well.
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
not set, defaults to -1, the zlib default, which is "a default
compromise between speed and compression (currently equivalent
to level 6)."
++
+Note that changing the compression level will not automatically recompress
+all existing objects. You can force recompression by passing the -F option
+to linkgit:git-repack[1].
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
no refspec is implied by any of the options given on the command
line. Possible values are:
+
-* `nothing` do not push anything.
-* `matching` push all matching branches.
+* `nothing` - do not push anything.
+* `matching` - push all matching branches.
All branches having the same name in both ends are considered to be
matching. This is the default.
-* `tracking` push the current branch to its upstream branch.
-* `current` push the current branch to a branch of the same name.
+* `tracking` - push the current branch to its upstream branch.
+* `current` - push the current branch to a branch of the same name.
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
the untracked files. Possible values are:
+
--
- - 'no' - Show no untracked files
- - 'normal' - Shows untracked files and directories
- - 'all' - Shows also individual files in untracked directories.
+* `no` - Show no untracked files.
+* `normal` - Show untracked files and directories.
+* `all` - Show also individual files in untracked directories.
--
+
If this variable is not specified, it defaults to 'normal'.
GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables.
What the -p option produces is slightly different from the traditional
-diff format.
+diff format:
-1. It is preceded with a "git diff" header, that looks like
- this:
+1. It is preceded with a "git diff" header that looks like this:
diff --git a/file1 b/file2
+
The `a/` and `b/` filenames are the same unless rename/copy is
involved. Especially, even for a creation or a deletion,
-`/dev/null` is _not_ used in place of `a/` or `b/` filenames.
+`/dev/null` is _not_ used in place of the `a/` or `b/` filenames.
+
When rename/copy is involved, `file1` and `file2` show the
name of the source file of the rename/copy and the name of
similarity index <number>
dissimilarity index <number>
index <hash>..<hash> <mode>
-
-3. TAB, LF, double quote and backslash characters in pathnames
- are represented as `\t`, `\n`, `\"` and `\\`, respectively.
- If there is need for such substitution then the whole
- pathname is put in double quotes.
-
++
+File modes are printed as 6-digit octal numbers including the file type
+and file permission bits.
++
+Path names in extended headers do not include the `a/` and `b/` prefixes.
++
The similarity index is the percentage of unchanged lines, and
the dissimilarity index is the percentage of changed lines. It
is a rounded down integer, followed by a percent sign. The
similarity index value of 100% is thus reserved for two equal
files, while 100% dissimilarity means that no line from the old
file made it into the new one.
++
+The index line includes the SHA-1 checksum before and after the change.
+The <mode> is included if the file mode does not change; otherwise,
+separate lines indicate the old and the new mode.
+
+3. TAB, LF, double quote and backslash characters in pathnames
+ are represented as `\t`, `\n`, `\"` and `\\`, respectively.
+ If there is need for such substitution then the whole
+ pathname is put in double quotes.
+
+4. All the `file1` files in the output refer to files before the
+ commit, and all the `file2` files refer to files after the commit.
+ It is incorrect to apply each change to each file sequentially. For
+ example, this patch will swap a and b:
+
+ diff --git a/a b/b
+ rename from a
+ rename to b
+ diff --git a/b b/a
+ rename from b
+ rename to a
combined diff format
--patience::
Generate a diff using the "patience diff" algorithm.
---stat[=width[,name-width]]::
+--stat[=<width>[,<name-width>]]::
Generate a diffstat. You can override the default
- output width for 80-column terminal by `--stat=width`.
+ output width for 80-column terminal by `--stat=<width>`.
The width of the filename part can be controlled by
giving another width to it separated by a comma.
number of modified files, as well as number of added and deleted
lines.
---dirstat[=limit]::
+--dirstat[=<limit>]::
Output the distribution of relative amount of changes (number of lines added or
removed) for each sub-directory. Directories with changes below
a cut-off percent (3% by default) are not shown. The cut-off percent
- can be set with `--dirstat=limit`. Changes in a child directory is not
+ can be set with `--dirstat=<limit>`. Changes in a child directory are not
counted for the parent directory, unless `--cumulative` is used.
---dirstat-by-file[=limit]::
+--dirstat-by-file[=<limit>]::
Same as `--dirstat`, but counts changed files instead of lines.
--summary::
Detect copies as well as renames. See also `--find-copies-harder`.
If `n` is specified, it has the same meaning as for `-M<n>`.
-ifndef::git-format-patch[]
---diff-filter=[ACDMRTUXB*]::
- Select only files that are Added (`A`), Copied (`C`),
- Deleted (`D`), Modified (`M`), Renamed (`R`), have their
- type (i.e. regular file, symlink, submodule, ...) changed (`T`),
- are Unmerged (`U`), are
- Unknown (`X`), or have had their pairing Broken (`B`).
- Any combination of the filter characters may be used.
- When `*` (All-or-none) is added to the combination, all
- paths are selected if there is any file that matches
- other criteria in the comparison; if there is no file
- that matches other criteria, nothing is selected.
-endif::git-format-patch[]
-
--find-copies-harder::
For performance reasons, by default, `-C` option finds copies only
if the original file of the copy was modified in the same
number.
ifndef::git-format-patch[]
+--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]::
+ Select only files that are Added (`A`), Copied (`C`),
+ Deleted (`D`), Modified (`M`), Renamed (`R`), have their
+ type (i.e. regular file, symlink, submodule, ...) changed (`T`),
+ are Unmerged (`U`), are
+ Unknown (`X`), or have had their pairing Broken (`B`).
+ Any combination of the filter characters (including none) can be used.
+ When `*` (All-or-none) is added to the combination, all
+ paths are selected if there is any file that matches
+ other criteria in the comparison; if there is no file
+ that matches other criteria, nothing is selected.
+
-S<string>::
Look for differences that introduce or remove an instance of
<string>. Note that this is different than the string simply
behavior for a remote may be specified with the remote.<name>.tagopt
setting. See linkgit:git-config[1].
+ifndef::git-pull[]
-t::
--tags::
Most of the tags are fetched automatically as branch
downloaded. The default behavior for a remote may be
specified with the remote.<name>.tagopt setting. See
linkgit:git-config[1].
+endif::git-pull[]
-u::
--update-head-ok::
edit it. After the editor was closed, adjust the hunk headers
and apply the patch to the index.
+
-*NOTE*: Obviously, if you change anything else than the first character
-on lines beginning with a space or a minus, the patch will no longer
-apply.
+The intent of this option is to pick and choose lines of the patch to
+apply, or even to modify the contents of lines to be staged. This can be
+quicker and more flexible than using the interactive hunk selector.
+However, it is easy to confuse oneself and create a patch that does not
+apply to the index. See EDITING PATCHES below.
-u::
--update::
This lets you review what will be committed (i.e. between
HEAD and index).
+
+EDITING PATCHES
+---------------
+
+Invoking `git add -e` or selecting `e` from the interactive hunk
+selector will open a patch in your editor; after the editor exits, the
+result is applied to the index. You are free to make arbitrary changes
+to the patch, but note that some changes may have confusing results, or
+even result in a patch that cannot be applied. If you want to abort the
+operation entirely (i.e., stage nothing new in the index), simply delete
+all lines of the patch. The list below describes some common things you
+may see in a patch, and which editing operations make sense on them.
+
+--
+added content::
+
+Added content is represented by lines beginning with "{plus}". You can
+prevent staging any addition lines by deleting them.
+
+removed content::
+
+Removed content is represented by lines beginning with "-". You can
+prevent staging their removal by converting the "-" to a " " (space).
+
+modified content::
+
+Modified content is represented by "-" lines (removing the old content)
+followed by "{plus}" lines (adding the replacement content). You can
+prevent staging the modification by converting "-" lines to " ", and
+removing "{plus}" lines. Beware that modifying only half of the pair is
+likely to introduce confusing changes to the index.
+--
+
+There are also more complex operations that can be performed. But beware
+that because the patch is applied only to the index and not the working
+tree, the working tree will appear to "undo" the change in the index.
+For example, introducing a a new line into the index that is in neither
+the HEAD nor the working tree will stage the new line for commit, but
+the line will appear to be reverted in the working tree.
+
+Avoid using these constructs, or do so with extreme caution.
+
+--
+removing untouched content::
+
+Content which does not differ between the index and working tree may be
+shown on context lines, beginning with a " " (space). You can stage
+context lines for removal by converting the space to a "-". The
+resulting working tree file will appear to re-add the content.
+
+modifying existing content::
+
+One can also modify context lines by staging them for removal (by
+converting " " to "-") and adding a "{plus}" line with the new content.
+Similarly, one can modify "{plus}" lines for existing additions or
+modifications. In all cases, the new modification will appear reverted
+in the working tree.
+
+new content::
+
+You may also add new content that does not exist in the patch; simply
+add new lines, each starting with "{plus}". The addition will appear
+reverted in the working tree.
+--
+
+There are also several operations which should be avoided entirely, as
+they will make the patch impossible to apply:
+
+* adding context (" ") or removal ("-") lines
+* deleting context or removal lines
+* modifying the contents of context or removal lines
+
SEE ALSO
--------
linkgit:git-status[1]
[--ignore-date] [--ignore-space-change | --ignore-whitespace]
[--whitespace=<option>] [-C<n>] [-p<n>] [--directory=<dir>]
[--reject] [-q | --quiet] [--scissors | --no-scissors]
- [<mbox> | <Maildir>...]
+ [(<mbox> | <Maildir>)...]
'git am' (--continue | --skip | --abort)
DESCRIPTION
OPTIONS
-------
-<mbox>|<Maildir>...::
+(<mbox>|<Maildir>)...::
The list of mailbox files to read patches from. If you do not
supply this argument, the command reads from the standard input.
If you supply directories, they will be treated as Maildirs.
'git apply' [--stat] [--numstat] [--summary] [--check] [--index]
[--apply] [--no-add] [--build-fake-ancestor=<file>] [-R | --reverse]
[--allow-binary-replacement | --binary] [--reject] [-z]
- [-pNUM] [-CNUM] [--inaccurate-eof] [--recount] [--cached]
+ [-p<n>] [-C<n>] [--inaccurate-eof] [--recount] [--cached]
[--ignore-space-change | --ignore-whitespace ]
- [--whitespace=<nowarn|warn|fix|error|error-all>]
- [--exclude=PATH] [--include=PATH] [--directory=<root>]
+ [--whitespace=(nowarn|warn|fix|error|error-all)]
+ [--exclude=<path>] [--include=<path>] [--directory=<root>]
[--verbose] [<patch>...]
DESCRIPTION
'git archive' [--format=<fmt>] [--list] [--prefix=<prefix>/] [<extra>]
[-o | --output=<file>] [--worktree-attributes]
[--remote=<repo> [--exec=<git-upload-archive>]] <tree-ish>
- [path...]
+ [<path>...]
DESCRIPTION
-----------
<tree-ish>::
The tree or commit to produce an archive for.
-path::
+<path>::
Without an optional path parameter, all files and subdirectories
of the current working directory are included in the archive.
If one or more paths are specified, only these are included.
[verse]
'git bundle' create <file> <git-rev-list-args>
'git bundle' verify <file>
-'git bundle' list-heads <file> [refname...]
-'git bundle' unbundle <file> [refname...]
+'git bundle' list-heads <file> [<refname>...]
+'git bundle' unbundle <file> [<refname>...]
DESCRIPTION
-----------
packaged.
-[refname...]::
+[<refname>...]::
A list of references used to limit the references reported as
available. This is principally of use to 'git fetch', which
expects to receive only those references asked for and not
<object>::
The name of the object to show.
For a more complete list of ways to spell object names, see
- the "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1].
+ the "SPECIFYING REVISIONS" section in linkgit:gitrevisions[7].
-t::
Instead of the content, show the object type identified by
These rules make it easy for shell script based tools to parse
reference names, pathname expansion by the shell when a reference name is used
unquoted (by mistake), and also avoids ambiguities in certain
-reference name expressions (see linkgit:gitrevisions[1]):
+reference name expressions (see linkgit:gitrevisions[7]):
. A double-dot `..` is often used as in `ref1..ref2`, and in some
contexts this notation means `{caret}ref1 ref2` (i.e. not in
[--stage=<number>|all]
[--temp]
[-z] [--stdin]
- [--] [<file>]*
+ [--] [<file>...]
DESCRIPTION
-----------
'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...::
- When <paths> or `--patch` are given, 'git checkout' *not* switch
- branches. It updates the named paths in the working tree from
- the index file or from a named <tree-ish> (most often a commit). In
- this case, the `-b` and `--track` options are meaningless and giving
- either of them results in an error. The <tree-ish> argument can be
- used to specify a specific tree-ish (i.e. commit, tag or tree)
- to update the index for the given paths before updating the
- working tree.
+ When <paths> or `--patch` are given, 'git checkout' does *not*
+ switch branches. It updates the named paths in the working tree
+ from the index file or from a named <tree-ish> (most often a
+ commit). In this case, the `-b` and `--track` options are
+ meaningless and giving either of them results in an error. The
+ <tree-ish> argument can be used to specify a specific tree-ish
+ (i.e. commit, tag or tree) to update the index for the given
+ paths before updating the working tree.
+
The index may contain unmerged entries because of a previous failed merge.
By default, if you try to check out such an entry from the index, the
<commit>...::
Commits to cherry-pick.
For a more complete list of ways to spell commits, see
- linkgit:gitrevisions[1].
+ linkgit:gitrevisions[7].
Sets of commits can be passed but no traversal is done by
default, as if the '--no-walk' option was specified, see
linkgit:git-rev-list[1].
Apply the changes introduced by all commits that are ancestors
of master but not of HEAD to produce new commits.
-git cherry-pick master\~4 master~2::
+git cherry-pick master{tilde}4 master{tilde}2::
Apply the changes introduced by the fifth and third last
commits pointed to by master and create 2 new commits with
configuration variables are created.
--mirror::
- Set up a mirror of the remote repository. This implies `--bare`.
+ Set up a mirror of the source repository. This implies `--bare`.
+ Compared to `--bare`, `--mirror` not only maps local branches of the
+ source to local branches of the target, it maps all refs (including
+ remote branches, notes etc.) and sets up a refspec configuration such
+ that all these refs are overwritten by a `git remote update` in the
+ target repository.
--origin <name>::
-o <name>::
SYNOPSIS
--------
-'git commit-tree' <tree> [-p <parent commit>]* < changelog
+'git commit-tree' <tree> [(-p <parent commit>)...] < changelog
DESCRIPTION
-----------
'git commit' [-a | --interactive] [-s] [-v] [-u<mode>] [--amend] [--dry-run]
[(-c | -C) <commit>] [-F <file> | -m <msg>] [--reset-author]
[--allow-empty] [--allow-empty-message] [--no-verify] [-e] [--author=<author>]
- [--date=<date>] [--cleanup=<mode>] [--status | --no-status] [--]
- [[-i | -o ]<file>...]
+ [--date=<date>] [--cleanup=<mode>] [--status | --no-status]
+ [-i | -o] [--] [<file>...]
DESCRIPTION
-----------
--------
[verse]
'git daemon' [--verbose] [--syslog] [--export-all]
- [--timeout=n] [--init-timeout=n] [--max-connections=n]
- [--strict-paths] [--base-path=path] [--base-path-relaxed]
- [--user-path | --user-path=path]
- [--interpolated-path=pathtemplate]
- [--reuseaddr] [--detach] [--pid-file=file]
- [--enable=service] [--disable=service]
- [--allow-override=service] [--forbid-override=service]
- [--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]]
- [directory...]
+ [--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>]
+ [--strict-paths] [--base-path=<path>] [--base-path-relaxed]
+ [--user-path | --user-path=<path>]
+ [--interpolated-path=<pathtemplate>]
+ [--reuseaddr] [--detach] [--pid-file=<file>]
+ [--enable=<service>] [--disable=<service>]
+ [--allow-override=<service>] [--forbid-override=<service>]
+ [--inetd | [--listen=<host_or_ipaddr>] [--port=<n>] [--user=<user> [--group=<group>]]
+ [<directory>...]
DESCRIPTION
-----------
'git daemon' will refuse to start when this option is enabled and no
whitelist is specified.
---base-path=path::
+--base-path=<path>::
Remap all the path requests as relative to the given path.
This is sort of "GIT root" - if you run 'git daemon' with
'--base-path=/srv/git' on example.com, then if you later try to pull
This is useful for switching to --base-path usage, while still
allowing the old paths.
---interpolated-path=pathtemplate::
+--interpolated-path=<pathtemplate>::
To support virtual hosting, an interpolated path template can be
used to dynamically construct alternate paths. The template
supports %H for the target hostname as supplied by the client but
Have the server run as an inetd service. Implies --syslog.
Incompatible with --port, --listen, --user and --group options.
---listen=host_or_ipaddr::
+--listen=<host_or_ipaddr>::
Listen on a specific IP address or hostname. IP addresses can
be either an IPv4 address or an IPv6 address if supported. If IPv6
is not supported, then --listen=hostname is also not supported and
--listen must be given an IPv4 address.
Incompatible with '--inetd' option.
---port=n::
+--port=<n>::
Listen on an alternative port. Incompatible with '--inetd' option.
---init-timeout=n::
+--init-timeout=<n>::
Timeout between the moment the connection is established and the
client request is received (typically a rather low value, since
that should be basically immediate).
---timeout=n::
+--timeout=<n>::
Timeout for specific client sub-requests. This includes the time
it takes for the server to process the sub-request and the time spent
waiting for the next client's request.
---max-connections=n::
+--max-connections=<n>::
Maximum number of concurrent clients, defaults to 32. Set it to
zero for no limit.
--verbose, thus by default only error conditions will be logged.
--user-path::
---user-path=path::
+--user-path=<path>::
Allow {tilde}user notation to be used in requests. When
specified with no parameter, requests to
git://host/{tilde}alice/foo is taken as a request to access
--detach::
Detach from the shell. Implies --syslog.
---pid-file=file::
+--pid-file=<file>::
Save the process id in 'file'. Ignored when the daemon
is run under `--inetd`.
---user=user::
---group=group::
+--user=<user>::
+--group=<group>::
Change daemon's uid and gid before entering the service loop.
When only `--user` is given without `--group`, the
primary group ID for the user is used. The values of
the facility of inet daemon to achieve the same before spawning
'git daemon' if needed.
---enable=service::
---disable=service::
+--enable=<service>::
+--disable=<service>::
Enable/disable the service site-wide per default. Note
that a service disabled site-wide can still be enabled
per repository if it is marked overridable and the
repository enables the service with a configuration
item.
---allow-override=service::
---forbid-override=service::
+--allow-override=<service>::
+--forbid-override=<service>::
Allow/forbid overriding the site-wide default with per
repository configuration. By default, all the services
are overridable.
further add to the index but you still haven't. You can
stage these changes by using linkgit:git-add[1].
+
-If exactly two paths are given, and at least one is untracked,
-compare the two files / directories. This behavior can be
-forced by --no-index.
+If exactly two paths are given and at least one points outside
+the current repository, 'git diff' will compare the two files /
+directories. This behavior can be forced by --no-index.
'git diff' [--options] --cached [<commit>] [--] [<path>...]::
Just in case if you are doing something exotic, it should be
noted that all of the <commit> in the above description, except
-for the last two forms that use ".." notations, can be any
-<tree-ish>.
+in the last two forms that use ".." notations, can be any
+<tree>. The third form ('git diff <commit> <commit>') can also
+be used to compare two <blob> objects.
For a more complete list of ways to spell <commit>, see
-"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1].
+"SPECIFYING REVISIONS" section in linkgit:gitrevisions[7].
However, "diff" is about comparing two _endpoints_, not ranges,
and the range notations ("<commit>..<commit>" and
"<commit>\...<commit>") do not mean a range as defined in the
-"SPECIFYING RANGES" section in linkgit:gitrevisions[1].
+"SPECIFYING RANGES" section in linkgit:gitrevisions[7].
OPTIONS
-------
SEE ALSO
--------
-linkgit:git-difftool[1]::
- Show changes using common diff tools
+diff(1),
+linkgit:git-difftool[1],
+linkgit:git-log[1],
+linkgit:gitdiffcore[7],
+linkgit:git-format-patch[1],
+linkgit:git-apply[1]
Author
------
in the commit (as opposed to just listing the files which are
different from the commit's first parent).
-[git-rev-list-args...]::
+[<git-rev-list-args>...]::
A list of arguments, acceptable to 'git rev-parse' and
'git rev-list', that specifies the specific objects and references
to export. For example, `master{tilde}10..master` causes the
* A complete 40 byte or abbreviated commit SHA-1 in hex.
* Any valid Git SHA-1 expression that resolves to a commit. See
- ``SPECIFYING REVISIONS'' in linkgit:gitrevisions[1] for details.
+ ``SPECIFYING REVISIONS'' in linkgit:gitrevisions[7] for details.
The special case of restarting an incremental import from the
current branch value should be written as:
'git fetch' [<options>] <group>
-'git fetch' --multiple [<options>] [<repository> | <group>]...
+'git fetch' --multiple [<options>] [(<repository> | <group>)...]
'git fetch' --all [<options>]
This filter may be used if you only need to modify the environment
in which the commit will be performed. Specifically, you might
want to rewrite the author/committer name/email/time environment
- variables (see linkgit:git-commit[1] for details). Do not forget
+ variables (see linkgit:git-commit-tree[1] for details). Do not forget
to re-export the variables.
--tree-filter <command>::
This is the filter for performing the commit.
If this filter is specified, it will be called instead of the
'git commit-tree' command, with arguments of the form
- "<TREE_ID> [-p <PARENT_COMMIT_ID>]..." and the log message on
+ "<TREE_ID> [(-p <PARENT_COMMIT_ID>)...]" and the log message on
stdin. The commit id is expected on stdout.
+
As a special extension, the commit filter may emit multiple
--------
[verse]
'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl]
- [
--sort=<key>]* [--format=<format>] [<pattern>...]
+ [
(--sort=<key>)...] [--format=<format>] [<pattern>...]
DESCRIPTION
-----------
that leads to the <since> to be output.
2. Generic <revision range> expression (see "SPECIFYING
- REVISIONS" section in linkgit:gitrevisions[1]) means the
+ REVISIONS" section in linkgit:gitrevisions[7]) means the
commits in the specified range.
The first rule takes precedence in the case of a single <commit>. To
the newly constructed pack and index before refs can be
updated to use objects contained in the pack.
---keep='why'::
+--keep=<msg>::
Like --keep create a .keep file before moving the index into
its final destination, but rather than creating an empty file
- place 'why' followed by an LF into the .keep file. The 'why'
+ place '<msg>' followed by an LF into the .keep file. The '<msg>'
message can later be searched for within all .keep files to
locate any which have outlived their usefulness.
Specify the directory from which templates will be used. (See the "TEMPLATE
DIRECTORY" section below.)
---shared[={false|true|umask|group|all|world|everybody|0xxx}]::
+--shared[=(false|true|umask|group|all|world|everybody|0xxx)]::
Specify that the git repository is to be shared amongst several users. This
allows users belonging to the same group to push into that
either <since> or <until> is omitted, it defaults to
`HEAD`, i.e. the tip of the current branch.
For a more complete list of ways to spell <since>
- and <until>, see linkgit:gitrevisions[1].
+ and <until>, see linkgit:gitrevisions[7].
--follow::
Continue listing the history of a file beyond renames
[--exclude-per-directory=<file>]
[--exclude-standard]
[--error-unmatch] [--with-tree=<tree-ish>]
- [--full-name] [--abbrev] [--] [<file>]*
+ [--full-name] [--abbrev] [--] [<file>...]
DESCRIPTION
-----------
--------
[verse]
'git ls-tree' [-d] [-r] [-t] [-l] [-z]
- [--name-only] [--name-status] [--full-name] [--full-tree] [--abbrev=[<n>]]
- <tree-ish> [paths...]
+ [--name-only] [--name-status] [--full-name] [--full-tree] [--abbrev[=<n>]]
+ <tree-ish> [<path>...]
DESCRIPTION
-----------
in the current working directory. Note that:
- the behaviour is slightly different from that of "/bin/ls" in that the
- 'paths' denote just a list of patterns to match, e.g. so specifying
+ '<path>' denotes just a list of patterns to match, e.g. so specifying
directory name (without '-r') will behave differently, and order of the
arguments does not matter.
- - the behaviour is similar to that of "/bin/ls" in that the 'paths' is
+ - the behaviour is similar to that of "/bin/ls" in that the '<path>' is
taken as relative to the current working directory. E.g. when you are
in a directory 'sub' that has a directory 'dir', you can run 'git
ls-tree -r HEAD dir' to list the contents of the tree (that is
Do not limit the listing to the current working directory.
Implies --full-name.
-paths::
+[<path>...]::
When paths are given, show them (note that this isn't really raw
pathnames, but rather a list of patterns to match). Otherwise
implicitly uses the root level of the tree as the sole path argument.
SYNOPSIS
--------
-'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [<mbox>|<Maildir>...]
+'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [(<mbox>|<Maildir>)...]
DESCRIPTION
-----------
-m <msg>::
Set the commit message to be used for the merge commit (in
case one is created).
-
- If `--log` is specified, a shortlog of the commits being merged
- will be appended to the specified message.
-
- The 'git fmt-merge-msg' command can be
- used to give a good default for automated 'git merge'
- invocations.
++
+If `--log` is specified, a shortlog of the commits being merged
+will be appended to the specified message.
++
+The 'git fmt-merge-msg' command can be
+used to give a good default for automated 'git merge'
+invocations.
--rerere-autoupdate::
--no-rerere-autoupdate::
SYNOPSIS
--------
-'git mergetool' [--tool=<tool>] [-y|--no-prompt|--prompt] [<file>]...
+'git mergetool' [--tool=<tool>] [-y|--no-prompt|--prompt] [<file>...]
DESCRIPTION
-----------
[verse]
'git pack-objects' [-q | --progress | --all-progress] [--all-progress-implied]
[--no-reuse-delta] [--delta-base-offset] [--non-empty]
- [--local] [--incremental] [--window=N] [--depth=N]
- [--revs [--unpacked | --all]*] [--stdout | base-name]
+ [--local] [--incremental] [--window=<n>] [--depth=<n>]
+ [--revs [--unpacked | --all]] [--stdout | base-name]
[--keep-true-parents] < object-list
reference was included in the resulting packfile. This
can be useful to send new tags to native git clients.
---window=[N]::
---depth=[N]::
+--window=<n>::
+--depth=<n>::
These two options affect how the objects contained in
the pack are stored using delta compression. The
objects are first internally sorted by type, size and
times to get to the necessary object.
The default value for --window is 10 and --depth is 50.
---window-memory=[N]::
+--window-memory=<n>::
This option provides an additional limit on top of `--window`;
the window size will dynamically scale down so as to not take
- up more than N bytes in memory. This is useful in
+ up more than '<n>' bytes in memory. This is useful in
repositories with a mix of large and small objects to not run
out of memory with a large window, but still be able to take
advantage of the large window for the smaller objects. The
`--window-memory=0` makes memory usage unlimited, which is the
default.
---max-pack-size=[N]::
+--max-pack-size=<n>::
Maximum size of each output pack file. The size can be suffixed with
"k", "m", or "g". The minimum size allowed is limited to 1 MiB.
If specified, multiple packfiles may be created.
wholesale enforcement of a different compression level on the
packed data is desired.
---compression=[N]::
+--compression=<n>::
Specifies compression level for newly-compressed data in the
generated pack. If not specified, pack compression level is
determined first by pack.compression, then by core.compression,
passed to linkgit:git-fetch[1]. <refspec> can name an
arbitrary remote ref (for example, the name of a tag) or even
a collection of refs with corresponding remote tracking branches
-(e.g., refs/heads/*:refs/remotes/origin/*), but usually it is
-the name of a branch in the remote repository.
+(e.g., refs/heads/{asterisk}:refs/remotes/origin/{asterisk}),
+but usually it is the name of a branch in the remote repository.
Default values for <repository> and <branch> are read from the
"remote" and "merge" configuration for the current branch
:git-pull: 1
--rebase::
- Instead of a merge, perform a rebase after fetching. If
- there is a remote ref for the upstream branch, and this branch
- was rebased since last fetched, the rebase uses that information
- to avoid rebasing non-local changes. To make this the default
- for branch `<name>`, set configuration `branch.<name>.rebase`
- to `true`.
+ Rebase the current branch on top of the upstream branch after
+ fetching. If there is a remote-tracking branch corresponding to
+ the upstream branch and the upstream branch was rebased since last
+ fetched, the rebase uses that information to avoid rebasing
+ non-local changes.
++
+See `branch.<name>.rebase` in linkgit:git-config[1] if you want to make
+`git pull` always use `{litdd}rebase` instead of merging.
+
[NOTE]
This is a potentially _dangerous_ mode of operation.
+
The <src> is often the name of the branch you would want to push, but
it can be any arbitrary "SHA-1 expression", such as `master~4` or
-`HEAD` (see linkgit:gitrevisions[1]).
+`HEAD` (see linkgit:gitrevisions[7]).
+
The <dst> tells which ref on the remote side is updated with this
push. Arbitrary expressions cannot be used here, an actual ref must
The reflog is useful in various git commands, to specify the old value
of a reference. For example, `HEAD@\{2\}` means "where HEAD used to be
two moves ago", `master@\{one.week.ago\}` means "where master used to
-point to one week ago", and so on. See linkgit:gitrevisions[1] for
+point to one week ago", and so on. See linkgit:gitrevisions[7] for
more details.
To delete single entries from the reflog, use the subcommand "delete"
SYNOPSIS
--------
-'git relink' [--safe] <dir> [<dir>]* <master_dir>
+'git relink' [--safe] <dir>... <master_dir>
DESCRIPTION
-----------
'git remote set-url --delete' [--push] <name> <url>
'git remote' [-v | --verbose] 'show' [-n] <name>
'git remote prune' [-n | --dry-run] <name>
-'git remote' [-v | --verbose] 'update' [-p | --prune] [group | remote]...
+'git remote' [-v | --verbose] 'update' [-p | --prune] [(<group> | <remote>)...]
DESCRIPTION
-----------
SYNOPSIS
--------
-'git repack' [-a] [-A] [-d] [-f] [-l] [-n] [-q] [--window=N] [--depth=N]
+'git repack' [-a] [-A] [-d] [-f] [-F] [-l] [-n] [-q] [--window=<n>] [--depth=<n>]
DESCRIPTION
-----------
linkgit:git-pack-objects[1].
-f::
+ Pass the `--no-reuse-delta` option to `git-pack-objects`, see
+ linkgit:git-pack-objects[1].
+
+-F::
Pass the `--no-reuse-object` option to `git-pack-objects`, see
linkgit:git-pack-objects[1].
this repository (or a direct copy of it)
over HTTP or FTP. See linkgit:git-update-server-info[1].
---window=[N]::
---depth=[N]::
+--window=<n>::
+--depth=<n>::
These two options affect how the objects contained in the pack are
stored using delta compression. The objects are first internally
sorted by type, size and optionally names and compared against the
to be applied that many times to get to the necessary object.
The default value for --window is 10 and --depth is 50.
---window-memory=[N]::
+--window-memory=<n>::
This option provides an additional limit on top of `--window`;
the window size will dynamically scale down so as to not take
- up more than N bytes in memory. This is useful in
+ up more than '<n>' bytes in memory. This is useful in
repositories with a mix of large and small objects to not run
out of memory with a large window, but still be able to take
advantage of the large window for the smaller objects. The
`--window-memory=0` makes memory usage unlimited, which is the
default.
---max-pack-size=[N]::
+--max-pack-size=<n>::
Maximum size of each output pack file. The size can be suffixed with
"k", "m", or "g". The minimum size allowed is limited to 1 MiB.
If specified, multiple packfiles may be created.
DESCRIPTION
-----------
In the first and second form, copy entries from <commit> to the index.
-In the third form, set the current branch to <commit>, optionally
-modifying index and worktree to match. The <commit> defaults to HEAD
+In the third form, set the current branch head (HEAD) to <commit>, optionally
+modifying index and working tree to match. The <commit> defaults to HEAD
in all forms.
'git reset' [-q] [<commit>] [--] <paths>...::
This form resets the index entries for all <paths> to their
- state at the <commit>. (It does not affect the worktree, nor
+ state at <commit>. (It does not affect the working tree, nor
the current branch.)
+
This means that `git reset <paths>` is the opposite of `git add
<paths>`.
++
+After running `git reset <paths>` to update the index entry, you can
+use linkgit:git-checkout[1] to check the contents out of the index to
+the working tree.
+Alternatively, using linkgit:git-checkout[1] and specifying a commit, you
+can copy the contents of a path out of a commit to the index and to the
+working tree in one go.
'git reset' --patch|-p [<commit>] [--] [<paths>...]::
Interactively select hunks in the difference between the index
linkgit:git-add[1]).
'git reset' [--<mode>] [<commit>]::
- This form points the current branch to <commit> and then
- updates index and working tree according to <mode>, which must
- be one of the following:
+ This form resets the current branch head to <commit> and
+ possibly updates the index (resetting it to the tree of <commit>) and
+ the working tree depending on <mode>, which
+ must be one of the following:
+
--
--soft::
- Does not touch the index file nor the working tree at all, but
- requires them to be in a good order. This leaves all your changed
- files "Changes to be committed", as 'git status' would
- put it.
+ Does not touch the index file nor the working tree at all (but
+ resets the head to <commit>, just like all modes do). This leaves
+ all your changed files "Changes to be committed", as 'git status'
+ would put it.
--mixed::
Resets the index but not the working tree (i.e., the changed files
been updated. This is the default action.
--hard::
- Matches the working tree and index to that of the tree being
- switched to. Any changes to tracked files in the working tree
- since <commit> are lost.
+ Resets the index and working tree. Any changes to tracked files in the
+ working tree since <commit> are discarded.
--merge::
- Resets the index to match the tree recorded by the named commit,
- and updates the files that are different between the named commit
- and the current commit in the working tree.
+ Resets the index and updates the files in the working tree that are
+ different between <commit> and HEAD, but keeps those which are
+ different between the index and working tree (i.e. which have changes
+ which have not been added).
+ If a file that is different between <commit> and the index has unstaged
+ changes, reset is aborted.
++
+In other words, --merge does something like a 'git read-tree -u -m <commit>',
+but carries forward unmerged index entries.
--keep::
- Reset the index to the given commit, keeping local changes in
- the working tree since the current commit, while updating
- working tree files without local changes to what appears in
- the given commit. If a file that is different between the
- current commit and the given commit has local changes, reset
- is aborted.
+ Resets the index, updates files in the working tree that are
+ different between <commit> and HEAD, but keeps those
+ which are different between HEAD and the working tree (i.e.
+ which have local changes).
+ If a file that is different between <commit> and HEAD has local changes,
+ reset is aborted.
++
+In other words, --keep does a 2-way merge between <commit> and HEAD followed by
+'git reset --mixed <commit>'.
--
If you want to undo a commit other than the latest on a branch,
brings your index file and the working tree back to that state,
and resets the tip of the branch to that commit.
-Undo a merge or pull inside a dirty work tree::
+Undo a merge or pull inside a dirty working tree::
+
------------
$ git pull <1>
continue working a bit more, but now you think that what you have in
your working tree should be in another branch that has nothing to do
with what you committed previously. You can start a new branch and
-reset it while keeping the changes in your work tree.
+reset it while keeping the changes in your working tree.
+
------------
$ git tag start
file. For example, the first line of the first table means that if a
file is in state A in the working tree, in state B in the index, in
state C in HEAD and in state D in the target, then "git reset --soft
-target" will put the file in state A in the working tree, in state B
-in the index and in state D in HEAD.
+target" will leave the file in the working tree in state A and in the
+index in state B. It resets (i.e. moves) the HEAD (i.e. the tip of
+the current branch, if you are on one) to "target" (which has the file
+in state D).
working index HEAD target working index HEAD
----------------------------------------------------
--keep B C C
"reset --merge" is meant to be used when resetting out of a conflicted
-merge. Any mergy operation guarantees that the work tree file that is
+merge. Any mergy operation guarantees that the working tree file that is
involved in the merge does not have local change wrt the index before
-it starts, and that it writes the result out to the work tree. So if
+it starts, and that it writes the result out to the working tree. So if
we see some difference between the index and the target and also
-between the index and the work tree, then it means that we are not
+between the index and the working tree, then it means that we are not
resetting out from a state that a mergy operation left after failing
with a conflict. That is why we disallow --merge option in this case.
SYNOPSIS
--------
[verse]
-'git rev-list' [ \--max-count=number ]
- [ \--skip=number ]
- [ \--max-age=timestamp ]
- [ \--min-age=timestamp ]
+'git rev-list' [ \--max-count=<number> ]
+ [ \--skip=<number> ]
+ [ \--max-age=<timestamp> ]
+ [ \--min-age=<timestamp> ]
[ \--sparse ]
[ \--merges ]
[ \--no-merges ]
[ \--full-history ]
[ \--not ]
[ \--all ]
- [ \--branches[=pattern] ]
- [ \--tags[=pattern] ]
- [ \--remotes[=pattern] ]
- [ \--glob=glob-pattern ]
+ [ \--branches[=<pattern>] ]
+ [ \--tags[=<pattern>] ]
+ [ \--remotes[=<pattern>] ]
+ [ \--glob=<glob-pattern> ]
[ \--stdin ]
[ \--quiet ]
[ \--topo-order ]
[ \--regexp-ignore-case | -i ]
[ \--extended-regexp | -E ]
[ \--fixed-strings | -F ]
- [ \--date={local|relative|default|iso|rfc|short} ]
+ [ \--date=(local|relative|default|iso|rfc|short) ]
[ [\--objects | \--objects-edge] [ \--unpacked ] ]
[ \--pretty | \--header ]
[ \--bisect ]
unfortunately named tag "master"), and show them as full
refnames (e.g. "refs/heads/master").
---abbrev-ref[={strict|loose}]::
+--abbrev-ref[=(strict|loose)]::
A non-ambiguous short name of the objects name.
The option core.warnAmbiguousRefs is used to select the strict
abbreviation mode.
<commit>...::
Commits to revert.
For a more complete list of ways to spell commit names, see
- linkgit:gitrevisions[1].
+ linkgit:gitrevisions[7].
Sets of commits can also be given but no traversal is done by
default, see linkgit:git-rev-list[1] and its '--no-walk'
option.
Revert the changes specified by the fourth last commit in HEAD
and create a new commit with the reverted changes.
-git revert -n master\~5..master~2::
+git revert -n master{tilde}5..master{tilde}2::
Revert the changes done by commits from the fifth last commit
in master (included) to the third last commit in master
depending on the use case, there are several ways that can be
done.
-Using "git commit -a"
-~~~~~~~~~~~~~~~~~~~~~
+Using ``git commit -a''
+~~~~~~~~~~~~~~~~~~~~~~~
If you intend that your next commit should record all modifications
of tracked files in the working tree and record all removals of
files that have been removed from the working tree with `rm`
automatically notice and record all removals. You can also have a
similar effect without committing by using `git add -u`.
-Using "git add -A"
-~~~~~~~~~~~~~~~~~~
+Using ``git add -A''
+~~~~~~~~~~~~~~~~~~~~
When accepting a new code drop for a vendor branch, you probably
want to record both the removal of paths and additions of new paths
as well as modifications of existing paths.
git ls-files -z | xargs -0 rm -f
----------------
-and then "untar" the new code in the working tree. Alternately
-you could "rsync" the changes into the working tree.
+and then untar the new code in the working tree. Alternately
+you could 'rsync' the changes into the working tree.
After that, the easiest way to record all removals, additions, and
modifications in the working tree is:
--email::
Show the email address of each author.
---format[='<format>']::
+--format[=<format>]::
Instead of the commit subject, use some other information to
describe each commit. '<format>' can be any string accepted
by the `--format` option of 'git log', such as '{asterisk} [%h] %s'.
[--current] [--color[=<when>] | --no-color] [--sparse]
[--more=<n> | --list | --independent | --merge-base]
[--no-name | --sha1-name] [--topics]
- [<rev> | <glob>]...
+ [(<rev> | <glob>)...]
'git show-branch' (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>]
OPTIONS
-------
<rev>::
- Arbitrary extended SHA1 expression (see linkgit:gitrevisions[1])
+ Arbitrary extended SHA1 expression (see linkgit:gitrevisions[7])
that typically names a branch head or a tag.
<glob>::
<pattern>...::
- Show references matching one or more patterns.
+ Show references matching one or more patterns. Patterns are matched from
+ the end of the full name, and only complete parts are matched, e.g.
+ 'master' matches 'refs/heads/master', 'refs/remotes/origin/master',
+ 'refs/tags/jedi/master' but not 'refs/heads/mymaster' nor
+ 'refs/remotes/master/jedi'.
OUTPUT
------
<object>...::
The names of objects to show.
For a more complete list of ways to spell object names, see
- "SPECIFYING REVISIONS" section in linkgit:gitrevisions[1].
+ "SPECIFYING REVISIONS" section in linkgit:gitrevisions[7].
include::pretty-options.txt[]
git show v1.0.0^\{tree\}::
Shows the tree pointed to by the tag `v1.0.0`.
+git show -s --format=%s v1.0.0^\{commit\}::
+ Shows the subject of the commit pointed to by the
+ tag `v1.0.0`.
+
git show next~10:Documentation/README::
Shows the contents of the file `Documentation/README` as
they were current in the 10th last commit of the branch
as well, they take precedence.
--no-metadata;;
Set the 'noMetadata' option in the [svn-remote] config.
+ This option is not recommended, please read the 'svn.noMetadata'
+ section of this manpage before using this option.
--use-svm-props;;
Set the 'useSvmProps' option in the [svn-remote] config.
--use-svnsync-props;;
OPTIONS
-------
---shared[={false|true|umask|group|all|world|everybody}]::
+--shared[=(false|true|umask|group|all|world|everybody)]::
--template=<template_directory>::
Only used with the 'init' command.
These are passed directly to 'git init'.
svn-remote.<name>.noMetadata::
This gets rid of the 'git-svn-id:' lines at the end of every commit.
+
-If you lose your .git/svn/git-svn/.rev_db file, 'git svn' will not
-be able to rebuild it and you won't be able to fetch again,
-either. This is fine for one-shot imports.
+This option can only be used for one-shot imports as 'git svn'
+will not be able to fetch again without metadata. Additionally,
+if you lose your .git/svn/**/.rev_map.* files, 'git svn' will not
+be able to rebuild them.
+
The 'git svn log' command will not work on repositories using
this, either. Using this conflicts with the 'useSvmProps'
option for (hopefully) obvious reasons.
++
+This option is NOT recommended as it makes it difficult to track down
+old references to SVN revision numbers in existing documentation, bug
+reports and archives. If you plan to eventually migrate from SVN to git
+and are certain about dropping SVN history, consider
+linkgit:git-filter-branch[1] instead. filter-branch also allows
+reformating of metadata for ease-of-reading and rewriting authorship
+info for non-"svn.authorsFile" users.
svn.useSvmProps::
svn-remote.<name>.useSvmProps::
'git update-index'
[--add] [--remove | --force-remove] [--replace]
[--refresh] [-q] [--unmerged] [--ignore-missing]
- [--cacheinfo <mode> <object> <file>]*
+ [(--cacheinfo <mode> <object> <file>)...]
[--chmod=(+|-)x]
[--assume-unchanged | --no-assume-unchanged]
[--skip-worktree | --no-skip-worktree]
[--info-only] [--index-info]
[-z] [--stdin]
[--verbose]
- [--] [<file>]*
+ [--] [<file>...]
DESCRIPTION
-----------
Report what is being added and removed from index.
-z::
- Only meaningful with `--stdin`; paths are separated with
- NUL character instead of LF.
+ Only meaningful with `--stdin` or `--index-info`; paths are
+ separated with NUL character instead of LF.
\--::
Do not interpret any more arguments as options.
OPTIONS
-------
--b BROWSER::
---browser=BROWSER::
- Use the specified BROWSER. It must be in the list of supported
+-b <browser>::
+--browser=<browser>::
+ Use the specified browser. It must be in the list of supported
browsers.
--t BROWSER::
---tool=BROWSER::
+-t <browser>::
+--tool=<browser>::
Same as above.
--c CONF.VAR::
---config=CONF.VAR::
+-c <conf.var>::
+--config=<conf.var>::
CONF.VAR is looked up in the git config files. If it's set,
- then its value specify the browser that should be used.
+ then its value specifies the browser that should be used.
CONFIGURATION VARIABLES
-----------------------
SYNOPSIS
--------
[verse]
-'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path]
+'git' [--version] [--exec-path[=<path>]] [--html-path]
[-p|--paginate|--no-pager] [--no-replace-objects]
- [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE]
- [-c name=value]
- [--help] COMMAND [ARGS]
+ [--bare] [--git-dir=<path>] [--work-tree=<path>]
+ [-c <name>=<value>]
+ [--help] <command> [<args>]
DESCRIPTION
-----------
the link:user-manual.html[Git User's Manual] for a more in-depth
introduction.
-The COMMAND is either a name of a Git command (see below) or an alias
+The '<command>' is either a name of a Git command (see below) or an alias
as defined in the configuration file (see linkgit:git-config[1]).
Formatted and hyperlinked version of the latest git
branch of the `git.git` repository.
Documentation for older releases are available here:
-* link:v1.7.3/git.html[documentation for release 1.7.3]
+* link:v1.7.3.2/git.html[documentation for release 1.7.3.2]
* release notes for
+ link:RelNotes/1.7.3.2.txt[1.7.3.2],
+ link:RelNotes/1.7.3.1.txt[1.7.3.1],
link:RelNotes/1.7.3.txt[1.7.3].
* link:v1.7.2.3/git.html[documentation for release 1.7.2.3]
The <name> is expected in the same format as listed by
'git config' (subkeys separated by dots).
---exec-path::
+--exec-path[=<path>]::
Path to wherever your core git programs are installed.
This can also be controlled by setting the GIT_EXEC_PATH
environment variable. If no path is given, 'git' will print
(i.e. the contents of `$GIT_DIR/refs/heads/<head>`).
For a more complete list of ways to spell object names, see
-"SPECIFYING REVISIONS" section in linkgit:gitrevisions[1].
+"SPECIFYING REVISIONS" section in linkgit:gitrevisions[7].
File/Directory Structure
- `csharp` suitable for source code in the C# language.
+- `fortran` suitable for source code in the Fortran language.
+
- `html` suitable for HTML/XHTML documents.
- `java` suitable for source code in the Java language.
before the commit log message is a short name you can use to
name the commit. In the above example, 'master' and 'mybranch'
are branch heads. 'master^' is the first parent of 'master'
-branch head. Please see linkgit:gitrevisions[1] if you want to
+branch head. Please see linkgit:gitrevisions[7] if you want to
see more complex cases.
[NOTE]
the form "'<from>'..'<to>'" to show all revisions between '<from>' and
back to '<to>'. Note, more advanced revision selection can be applied.
For a more complete list of ways to spell object names, see
- linkgit:gitrevisions[1].
+ linkgit:gitrevisions[7].
<path>...::
Disables the `renormalize` option. This overrides the
`merge.renormalize` configuration variable.
-subtree[=path];;
+subtree[=<path>];;
This option is a more advanced form of 'subtree' strategy, where
the strategy makes a guess on how two trees must be shifted to
match with each other when merging. Instead, the specified path
---pretty[='<format>']::
---format='<format>'::
+--pretty[=<format>]::
+--format=<format>::
Pretty-print the contents of the commit logs in a given format,
where '<format>' can be one of 'oneline', 'short', 'medium',
Synonym for `--date=relative`.
---date={relative,local,default,iso,rfc,short,raw}::
+--date=(relative|local|default|iso|rfc|short|raw)::
Only takes effect for dates shown in human-readable format, such
as when using "--pretty". `log.date` config variable sets a default
--parents::
- Print the parents of the commit. Also enables parent
- rewriting, see 'History Simplification' below.
+ Print also the parents of the commit (in the form "commit parent...").
+ Also enables parent rewriting, see 'History Simplification' below.
--children::
- Print the children of the commit. Also enables parent
- rewriting, see 'History Simplification' below.
+ Print also the children of the commit (in the form "commit child...").
+ Also enables parent rewriting, see 'History Simplification' below.
ifdef::git-rev-list[]
--timestamp::
to be printed in between commits, in order for the graph history
to be drawn properly.
+
+This enables parent rewriting, see 'History Simplification' below.
++
This implies the '--topo-order' option by default, but the
'--date-order' option may also be specified.
-t::
Show the tree objects in the diff output. This implies '-r'.
+
+-s::
+ Suppress diff output.
endif::git-rev-list[]
Commit Limiting
Pretend as if all the refs in `refs/` are listed on the
command line as '<commit>'.
---branches[=pattern]::
+--branches[=<pattern>]::
Pretend as if all the refs in `refs/heads` are listed
- on the command line as '<commit>'. If `pattern` is given, limit
+ on the command line as '<commit>'. If '<pattern>' is given, limit
branches to ones matching given shell glob. If pattern lacks '?',
'*', or '[', '/*' at the end is implied.
---tags[=pattern]::
+--tags[=<pattern>]::
Pretend as if all the refs in `refs/tags` are listed
- on the command line as '<commit>'. If `pattern` is given, limit
+ on the command line as '<commit>'. If '<pattern>' is given, limit
tags to ones matching given shell glob. If pattern lacks '?', '*',
or '[', '/*' at the end is implied.
---remotes[=pattern]::
+--remotes[=<pattern>]::
Pretend as if all the refs in `refs/remotes` are listed
- on the command line as '<commit>'. If `pattern`is given, limit
+ on the command line as '<commit>'. If '<pattern>' is given, limit
remote tracking branches to ones matching given shell glob.
If pattern lacks '?', '*', or '[', '/*' at the end is implied.
---glob=glob-pattern::
- Pretend as if all the refs matching shell glob `glob-pattern`
+--glob=<glob-pattern>::
+ Pretend as if all the refs matching shell glob '<glob-pattern>'
are listed on the command line as '<commit>'. Leading 'refs/',
is automatically prepended if missing. If pattern lacks '?', '*',
or '[', '/*' at the end is implied.
found.
* A colon, followed by a slash, followed by a text (e.g. `:/fix nasty bug`): this names
- a commit whose commit message starts with the specified text.
+ a commit whose commit message matches the specified regular expression.
This name returns the youngest matching commit which is
reachable from any ref. If the commit message starts with a
'!', you have to repeat that; the special sequence ':/!',
followed by something else than '!' is reserved for now.
+ The regular expression can match any part of the commit message. To
+ match messages starting with a string, one can use e.g. `:/^foo`.
* A suffix ':' followed by a path (e.g. `HEAD:README`); this names the blob or tree
at the given path in the tree-ish object named by the part
--- /dev/null
+sigchain API
+============
+
+Code often wants to set a signal handler to clean up temporary files or
+other work-in-progress when we die unexpectedly. For multiple pieces of
+code to do this without conflicting, each piece of code must remember
+the old value of the handler and restore it either when:
+
+ 1. The work-in-progress is finished, and the handler is no longer
+ necessary. The handler should revert to the original behavior
+ (either another handler, SIG_DFL, or SIG_IGN).
+
+ 2. The signal is received. We should then do our cleanup, then chain
+ to the next handler (or die if it is SIG_DFL).
+
+Sigchain is a tiny library for keeping a stack of handlers. Your handler
+and installation code should look something like:
+
+------------------------------------------
+ void clean_foo_on_signal(int sig)
+ {
+ clean_foo();
+ sigchain_pop(sig);
+ raise(sig);
+ }
+
+ void other_func()
+ {
+ sigchain_push_common(clean_foo_on_signal);
+ mess_up_foo();
+ clean_foo();
+ }
+------------------------------------------
+
+Handlers are given the typdef of sigchain_fun. This is the same type
+that is given to signal() or sigaction(). It is perfectly reasonable to
+push SIG_DFL or SIG_IGN onto the stack.
+
+You can sigchain_push and sigchain_pop individual signals. For
+convenience, sigchain_push_common will push the handler onto the stack
+for many common signals.
For the complete list of paths which git checks for references, and
the order it uses to decide which to choose when there are multiple
references with the same shorthand name, see the "SPECIFYING
-REVISIONS" section of linkgit:gitrevisions[1].
+REVISIONS" section of linkgit:gitrevisions[7].
[[Updating-a-repository-With-git-fetch]]
Updating a repository with git fetch
- HEAD: refers to the head of the current branch
There are many more; see the "SPECIFYING REVISIONS" section of the
-linkgit:gitrevisions[1] man page for the complete list of ways to
+linkgit:gitrevisions[7] man page for the complete list of ways to
name revisions. Some examples:
-------------------------------------------------
$ gitk $( git show-ref --heads ) --not $( git show-ref --tags )
-------------------------------------------------
-(See linkgit:gitrevisions[1] for explanations of commit-selecting
+(See linkgit:gitrevisions[7] for explanations of commit-selecting
syntax such as `--not`.)
[[making-a-release]]
and then he just cut-and-pastes the output commands after verifying that
they look OK.
-[[Finding-comments-With-given-Content]]
+[[Finding-commits-With-given-Content]]
Finding commits referencing a file with given content
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The reflogs are kept by default for 30 days, after which they may be
pruned. See linkgit:git-reflog[1] and linkgit:git-gc[1] to learn
how to control this pruning, and see the "SPECIFYING REVISIONS"
-section of linkgit:gitrevisions[1] for details.
+section of linkgit:gitrevisions[7] for details.
Note that the reflog history is very different from normal git history.
While normal history is shared by every repository that works on the
Now to apply some patches from the community. Think of a short
snappy name for a branch to hold this patch (or related group of
-patches), and create a new branch from the current tip of Linus's
-branch:
+patches), and create a new branch from a recent stable tag of
+Linus's branch. Picking a stable base for your branch will:
+1) help you: by avoiding inclusion of unrelated and perhaps lightly
+tested changes
+2) help future bug hunters that use "git bisect" to find problems
-------------------------------------------------
-$ git checkout -b speed-up-spinlocks origin
+$ git checkout -b speed-up-spinlocks v2.6.35
-------------------------------------------------
Now you apply the patch(es), run some tests, and commit the change(s). If
sequence of patches on top of "origin":
................................................
- o--o--o <-- origin
+ o--o--O <-- origin
\
- o--o--o <-- mywork
+ a--b--c <-- mywork
................................................
Some more interesting work has been done in the upstream project, and
state at the time of the commit, and a list of parents:
-------------------------------------------------
-$ git commit-tree <tree> -p <parent> [-p <parent2> ..]
+$ git commit-tree <tree> -p <parent> [(-p <parent2>)...]
-------------------------------------------------
and then giving the reason for the commit on stdin (either through
#!/bin/sh
GVF=GIT-VERSION-FILE
-DEF_VER=v1.7.3
+DEF_VER=v1.7.3.3
LF='
'
- A POSIX-compliant shell is required to run many scripts needed
for everyday use (e.g. "bisect", "pull").
- - "Perl" is needed to use some of the features (e.g. preparing a
- partial commit using "git add -i/-p", interacting with svn
- repositories with "git svn"). If you can live without these, use
- NO_PERL.
+ - "Perl" version 5.8 or later is needed to use some of the
+ features (e.g. preparing a partial commit using "git add -i/-p",
+ interacting with svn repositories with "git svn"). If you can
+ live without these, use NO_PERL.
- "openssl" library is used by git-imap-send to use IMAP over SSL.
If you don't need it, use NO_OPENSSL.
$(patsubst %.py,%,$(SCRIPT_PYTHON)) \
git-instaweb
+ETAGS_TARGET = TAGS
+
# Empty...
EXTRA_PROGRAMS =
NO_REGEX = YesPlease
NO_PYTHON = YesPlease
BLK_SHA1 = YesPlease
+ ETAGS_TARGET = ETAGS
COMPAT_CFLAGS += -D__USE_MINGW_ACCESS -DNOGDI -Icompat -Icompat/fnmatch -Icompat/win32
COMPAT_CFLAGS += -DSTRIP_EXTENSION=\".exe\"
COMPAT_OBJS += compat/mingw.o compat/fnmatch/fnmatch.o compat/winansi.o \
git-imap-send$X: imap-send.o $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
- $(LIBS) $(OPENSSL_LINK) $(OPENSSL_LIBSSL)
+ $(LIBS) $(OPENSSL_LINK) $(OPENSSL_LIBSSL) $(LIB_4_CRYPTO)
git-http-fetch$X: revision.o http.o http-walker.o http-fetch.o $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
pdf:
$(MAKE) -C Documentation pdf
-TAGS:
- $(RM) TAGS
- $(FIND) . -name '*.[hcS]' -print | xargs etags -a
+$(ETAGS_TARGET): FORCE
+ $(RM) $(ETAGS_TARGET)
+ $(FIND) . -name '*.[hcS]' -print | xargs etags -a -o $(ETAGS_TARGET)
-tags:
+tags: FORCE
$(RM) tags
$(FIND) . -name '*.[hcS]' -print | xargs ctags -a
$(FIND) . -name '*.[hcS]' -print | xargs cscope -b
### Detect prefix changes
-TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
+TRACK_CFLAGS = $(CC):$(subst ','\'',$(ALL_CFLAGS)):\
$(bindir_SQ):$(gitexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
GIT-CFLAGS: FORCE
$(RM) $(TEST_PROGRAMS)
$(RM) -r bin-wrappers
$(RM) -r $(dep_dirs)
- $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
+ $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h $(ETAGS_TARGET) tags cscope*
$(RM) -r autom4te.cache
$(RM) config.log config.mak.autogen config.mak.append config.status config.cache
$(RM) -r $(GIT_TARNAME) .doc-tmp-dir
.PHONY: all install clean strip
.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
-.PHONY: FORCE TAGS tags cscope
+.PHONY: FORCE cscope
### Check documentation
#
-Documentation/RelNotes/1.7.3.txt
\ No newline at end of file
+Documentation/RelNotes/1.7.3.3.txt
\ No newline at end of file
#include "unpack-trees.h"
static char const * const archive_usage[] = {
- "git archive [options] <tree-ish> [path...]",
+ "git archive [options] <tree-ish> [<path>...]",
"git archive --list",
- "git archive --remote <repo> [--exec <cmd>] [options] <tree-ish> [path...]",
+ "git archive --remote <repo> [--exec <cmd>] [options] <tree-ish> [<path>...]",
"git archive --remote <repo> [--exec <cmd>] --list",
NULL
};
extern int check_pager_config(const char *cmd);
-extern int textconv_object(const char *path, const unsigned char *sha1, char **buf, unsigned long *buf_size);
+extern int textconv_object(const char *path, unsigned mode, const unsigned char *sha1, char **buf, unsigned long *buf_size);
extern int cmd_add(int argc, const char **argv, const char *prefix);
extern int cmd_annotate(int argc, const char **argv, const char *prefix);
static int add_config(const char *var, const char *value, void *cb)
{
- if (!strcasecmp(var, "add.ignore-errors")) {
+ if (!strcasecmp(var, "add.ignoreerrors") ||
+ !strcasecmp(var, "add.ignore-errors")) {
ignore_add_errors = git_config_bool(var, value);
return 0;
}
unsigned long len;
void *dst;
+ if (!fragment)
+ return error("missing binary patch data for '%s'",
+ patch->new_name ?
+ patch->new_name :
+ patch->old_name);
+
/* Binary patch is irreversible without the optional second hunk */
if (apply_in_reverse) {
if (!fragment->next)
struct commit *commit;
mmfile_t file;
unsigned char blob_sha1[20];
+ unsigned mode;
char path[FLEX_ARRAY];
};
* Return 1 if the conversion succeeds, 0 otherwise.
*/
int textconv_object(const char *path,
+ unsigned mode,
const unsigned char *sha1,
char **buf,
unsigned long *buf_size)
struct userdiff_driver *textconv;
df = alloc_filespec(path);
- fill_filespec(df, sha1, S_IFREG | 0664);
+ fill_filespec(df, sha1, mode);
textconv = get_textconv(df);
if (!textconv) {
free_filespec(df);
num_read_blob++;
if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) &&
- textconv_object(o->path, o->blob_sha1, &file->ptr, &file_size))
+ textconv_object(o->path, o->mode, o->blob_sha1, &file->ptr, &file_size))
;
else
file->ptr = read_sha1_file(o->blob_sha1, &type, &file_size);
* for an origin is also used to pass the blame for the entire file to
* the parent to detect the case where a child's blob is identical to
* that of its parent's.
+ *
+ * This also fills origin->mode for corresponding tree path.
*/
-static int fill_blob_sha1(struct origin *origin)
+static int fill_blob_sha1_and_mode(struct origin *origin)
{
- unsigned mode;
if (!is_null_sha1(origin->blob_sha1))
return 0;
if (get_tree_entry(origin->commit->object.sha1,
origin->path,
- origin->blob_sha1, &mode))
+ origin->blob_sha1, &origin->mode))
goto error_out;
if (sha1_object_info(origin->blob_sha1, NULL) != OBJ_BLOB)
goto error_out;
return 0;
error_out:
hashclr(origin->blob_sha1);
+ origin->mode = S_IFINVALID;
return -1;
}
/*
* If the origin was newly created (i.e. get_origin
* would call make_origin if none is found in the
- * scoreboard), it does not know the blob_sha1,
+ * scoreboard), it does not know the blob_sha1/mode,
* so copy it. Otherwise porigin was in the
- * scoreboard and already knows blob_sha1.
+ * scoreboard and already knows blob_sha1/mode.
*/
- if (porigin->refcnt == 1)
+ if (porigin->refcnt == 1) {
hashcpy(porigin->blob_sha1, cached->blob_sha1);
+ porigin->mode = cached->mode;
+ }
return porigin;
}
/* otherwise it was not very useful; free it */
/* The path is the same as parent */
porigin = get_origin(sb, parent, origin->path);
hashcpy(porigin->blob_sha1, origin->blob_sha1);
+ porigin->mode = origin->mode;
} else {
/*
* Since origin->path is a pathspec, if the parent
case 'M':
porigin = get_origin(sb, parent, origin->path);
hashcpy(porigin->blob_sha1, p->one->sha1);
+ porigin->mode = p->one->mode;
break;
case 'A':
case 'T':
cached = make_origin(porigin->commit, porigin->path);
hashcpy(cached->blob_sha1, porigin->blob_sha1);
+ cached->mode = porigin->mode;
parent->util = cached;
}
return porigin;
!strcmp(p->two->path, origin->path)) {
porigin = get_origin(sb, parent, p->one->path);
hashcpy(porigin->blob_sha1, p->one->sha1);
+ porigin->mode = p->one->mode;
break;
}
}
norigin = get_origin(sb, parent, p->one->path);
hashcpy(norigin->blob_sha1, p->one->sha1);
+ norigin->mode = p->one->mode;
fill_origin_blob(&sb->revs->diffopt, norigin, &file_p);
if (!file_p.ptr)
continue;
switch (st.st_mode & S_IFMT) {
case S_IFREG:
if (DIFF_OPT_TST(opt, ALLOW_TEXTCONV) &&
- textconv_object(read_from, null_sha1, &buf.buf, &buf_len))
+ textconv_object(read_from, mode, null_sha1, &buf.buf, &buf_len))
buf.len = buf_len;
else if (strbuf_read_file(&buf, read_from, st.st_size) != st.st_size)
die_errno("cannot open or read '%s'", read_from);
}
else {
o = get_origin(&sb, sb.final, path);
- if (fill_blob_sha1(o))
+ if (fill_blob_sha1_and_mode(o))
die("no such path %s in %s", path, final_commit_name);
if (DIFF_OPT_TST(&sb.revs->diffopt, ALLOW_TEXTCONV) &&
- textconv_object(path, o->blob_sha1, (char **) &sb.final_buf,
+ textconv_object(path, o->mode, o->blob_sha1, (char **) &sb.final_buf,
&sb.final_buf_size))
;
else
static const char builtin_bundle_usage[] =
"git bundle create <file> <git-rev-list args>\n"
" or: git bundle verify <file>\n"
- " or: git bundle list-heads <file> [refname...]\n"
- " or: git bundle unbundle <file> [refname...]";
+ " or: git bundle list-heads <file> [<refname>...]\n"
+ " or: git bundle unbundle <file> [<refname>...]";
int cmd_bundle(int argc, const char **argv, const char *prefix)
{
die("git cat-file --textconv %s: <object> must be <sha1:path>",
obj_name);
- if (!textconv_object(obj_context.path, sha1, &buf, &size))
+ if (!textconv_object(obj_context.path, obj_context.mode, sha1, &buf, &size))
die("git cat-file --textconv: unable to run textconv on %s",
obj_name);
break;
}
static const char * const builtin_checkout_index_usage[] = {
- "git checkout-index [options] [--] <file>...",
+ "git checkout-index [options] [--] [<file>...]",
NULL
};
"create and checkout a new branch"),
OPT_STRING('B', NULL, &opts.new_branch_force, "branch",
"create/reset and checkout a branch"),
- OPT_BOOLEAN('l', NULL, &opts.new_branch_log, "log for new branch"),
- OPT_SET_INT('t', "track", &opts.track, "track",
+ OPT_BOOLEAN('l', NULL, &opts.new_branch_log, "create reflog for new branch"),
+ OPT_SET_INT('t', "track", &opts.track, "set upstream info for new branch",
BRANCH_TRACK_EXPLICIT),
OPT_STRING(0, "orphan", &opts.new_orphan_branch, "new branch", "new unparented branch"),
- OPT_SET_INT('2', "ours", &opts.writeout_stage, "stage",
+ OPT_SET_INT('2', "ours", &opts.writeout_stage, "checkout our version for unmerged files",
2),
- OPT_SET_INT('3', "theirs", &opts.writeout_stage, "stage",
+ OPT_SET_INT('3', "theirs", &opts.writeout_stage, "checkout their version for unmerged files",
3),
- OPT_BOOLEAN('f', "force", &opts.force, "force"),
- OPT_BOOLEAN('m', "merge", &opts.merge, "merge"),
+ OPT_BOOLEAN('f', "force", &opts.force, "force checkout (throw away local modifications)"),
+ OPT_BOOLEAN('m', "merge", &opts.merge, "perform a 3-way merge with the new branch"),
OPT_STRING(0, "conflict", &conflict_style, "style",
"conflict style (merge or diff3)"),
OPT_BOOLEAN('p', "patch", &patch_mode, "select hunks interactively"),
{
int i;
int show_only = 0, remove_directories = 0, quiet = 0, ignored = 0;
- int ignored_only = 0, baselen = 0, config_set = 0, errors = 0;
+ int ignored_only = 0, config_set = 0, errors = 0;
int rm_flags = REMOVE_DIR_KEEP_NESTED_GIT;
struct strbuf directory = STRBUF_INIT;
struct dir_struct dir;
if (pathspec) {
memset(seen, 0, argc > 0 ? argc : 1);
matches = match_pathspec(pathspec, ent->name, len,
- baselen, seen);
+ 0, seen);
}
if (S_ISDIR(st.st_mode)) {
printf("Removing %s\n", qname);
if (remove_dir_recursively(&directory,
rm_flags) != 0) {
- warning("failed to remove '%s'", qname);
+ warning("failed to remove %s", qname);
errors++;
}
} else if (show_only) {
printf("Removing %s\n", qname);
}
if (unlink(ent->name) != 0) {
- warning("failed to remove '%s'", qname);
+ warning("failed to remove %s", qname);
errors++;
}
}
#include "builtin.h"
#include "utf8.h"
-static const char commit_tree_usage[] = "git commit-tree <sha1> [-p <sha1>]* < changelog";
+static const char commit_tree_usage[] = "git commit-tree <sha1> [(-p <sha1>)...] < changelog";
static void new_parent(struct commit *parent, struct commit_list **parents_p)
{
static const char * const builtin_fetch_usage[] = {
"git fetch [<options>] [<repository> [<refspec>...]]",
"git fetch [<options>] <group>",
- "git fetch --multiple [<options>] [<repository> | <group>]...",
+ "git fetch --multiple [<options>] [(<repository> | <group>)...]",
"git fetch --all [<options>]",
NULL
};
#endif
static char const * const grep_usage[] = {
- "git grep [options] [-e] <pattern> [<rev>...] [[--] path...]",
+ "git grep [options] [-e] <pattern> [<rev>...] [[--] <path>...]",
NULL
};
#include "exec_cmd.h"
static const char index_pack_usage[] =
-"git index-pack [-v] [-o <index-file>] [{ --keep | --keep=<msg> }] [--strict] { <pack-file> | --stdin [--fix-thin] [<pack-file>] }";
+"git index-pack [-v] [-o <index-file>] [ --keep | --keep=<msg> ] [--strict] (<pack-file> | --stdin [--fix-thin] [<pack-file>])";
struct object_entry
{
input_offset += bytes;
/* make sure off_t is sufficiently large not to wrap */
- if (consumed_bytes > consumed_bytes + bytes)
+ if (signed_add_overflows(consumed_bytes, bytes))
die("pack too large for current definition of off_t");
consumed_bytes += bytes;
}
return reinit;
}
+static void create_object_directory(void)
+{
+ const char *object_directory = get_object_directory();
+ int len = strlen(object_directory);
+ char *path = xmalloc(len + 40);
+
+ memcpy(path, object_directory, len);
+
+ safe_create_dir(object_directory, 1);
+ strcpy(path+len, "/pack");
+ safe_create_dir(path, 1);
+ strcpy(path+len, "/info");
+ safe_create_dir(path, 1);
+
+ free(path);
+}
+
int init_db(const char *template_dir, unsigned int flags)
{
- const char *sha1_dir;
- char *path;
- int len, reinit;
+ int reinit;
safe_create_dir(get_git_dir(), 0);
reinit = create_default_files(template_dir);
- sha1_dir = get_object_directory();
- len = strlen(sha1_dir);
- path = xmalloc(len + 40);
- memcpy(path, sha1_dir, len);
-
- safe_create_dir(sha1_dir, 1);
- strcpy(path+len, "/pack");
- safe_create_dir(path, 1);
- strcpy(path+len, "/info");
- safe_create_dir(path, 1);
+ create_object_directory();
if (shared_repository) {
char buf[10];
}
static const char * const ls_files_usage[] = {
- "git ls-files [options] [<file>]*",
+ "git ls-files [options] [<file>...]",
NULL
};
static const char *ls_tree_prefix;
static const char * const ls_tree_usage[] = {
- "git ls-tree [<options>] <tree-ish> [path...]",
+ "git ls-tree [<options>] <tree-ish> [<path>...]",
NULL
};
#include "strbuf.h"
static const char git_mailsplit_usage[] =
-"git mailsplit [-d<prec>] [-f<n>] [-b] [--keep-cr] -o<directory> [<mbox>|<Maildir>...]";
+"git mailsplit [-d<prec>] [-f<n>] [-b] [--keep-cr] -o<directory> [(<mbox>|<Maildir>)...]";
static int is_from_line(const char *line, int len)
{
xmparam_t xmp = {{0}};
int ret = 0, i = 0, to_stdout = 0;
int quiet = 0;
+ int prefixlen = 0;
struct option options[] = {
OPT_BOOLEAN('p', "stdout", &to_stdout, "send results to standard output"),
OPT_SET_INT(0, "diff3", &xmp.style, "use a diff3 based merge", XDL_MERGE_DIFF3),
"%s\n", strerror(errno));
}
+ if (prefix)
+ prefixlen = strlen(prefix);
+
for (i = 0; i < 3; i++) {
+ const char *fname = prefix_filename(prefix, prefixlen, argv[i]);
if (!names[i])
names[i] = argv[i];
- if (read_mmfile(mmfs + i, argv[i]))
+ if (read_mmfile(mmfs + i, fname))
return -1;
if (buffer_is_binary(mmfs[i].ptr, mmfs[i].size))
return error("Cannot merge binary files: %s\n",
die("not a valid object: %s", buffer.buf);
}
+static void read_empty(unsigned const char *sha1, int verbose)
+{
+ int i = 0;
+ const char *args[7];
+
+ args[i++] = "read-tree";
+ if (verbose)
+ args[i++] = "-v";
+ args[i++] = "-m";
+ args[i++] = "-u";
+ args[i++] = EMPTY_TREE_SHA1_HEX;
+ args[i++] = sha1_to_hex(sha1);
+ args[i] = NULL;
+
+ if (run_command_v_opt(args, RUN_GIT_CMD))
+ die("read-tree failed");
+}
+
static void reset_hard(unsigned const char *sha1, int verbose)
{
int i = 0;
die("%s - not something we can merge", argv[0]);
update_ref("initial pull", "HEAD", remote_head->sha1, NULL, 0,
DIE_ON_ERR);
- reset_hard(remote_head->sha1, 0);
+ read_empty(remote_head->sha1, 0);
return 0;
} else {
struct strbuf merge_names = STRBUF_INIT;
#endif
static const char pack_usage[] =
- "git pack-objects [{ -q | --progress | --all-progress }]\n"
+ "git pack-objects [ -q | --progress | --all-progress ]\n"
" [--all-progress-implied]\n"
- " [--max-pack-size=N] [--local] [--incremental]\n"
- " [--window=N] [--window-memory=N] [--depth=N]\n"
+ " [--max-pack-size=<n>] [--local] [--incremental]\n"
+ " [--window=<n>] [--window-memory=<n>] [--depth=<n>]\n"
" [--no-reuse-delta] [--no-reuse-object] [--delta-base-offset]\n"
- " [--threads=N] [--non-empty] [--revs [--unpacked | --all]*]\n"
+ " [--threads=<n>] [--non-empty] [--revs [--unpacked | --all]]\n"
" [--reflog] [--stdout | base-name] [--include-tag]\n"
- " [--keep-unreachable | --unpack-unreachable \n"
- " [<ref-list | <object-list]";
+ " [--keep-unreachable | --unpack-unreachable]\n"
+ " [< ref-list | < object-list]";
struct object_entry {
struct pack_idx_entry idx;
written_list[nr_written++] = &e->idx;
/* make sure off_t is sufficiently large not to wrap */
- if (*offset > *offset + size)
+ if (signed_add_overflows(*offset, size))
die("pack too large for current definition of off_t");
*offset += size;
return 1;
"git remote set-head <name> (-a | -d | <branch>)",
"git remote [-v | --verbose] show [-n] <name>",
"git remote prune [-n | --dry-run] <name>",
- "git remote [-v | --verbose] update [-p | --prune] [group | remote]",
+ "git remote [-v | --verbose] update [-p | --prune] [(<group> | <remote>)...]",
"git remote set-branches <name> [--add] <branch>...",
"git remote set-url <name> <newurl> [<oldurl>]",
"git remote set-url --add <name> <newurl>",
static const char rev_list_usage[] =
"git rev-list [OPTION] <commit-id>... [ -- paths... ]\n"
" limiting output:\n"
-" --max-count=nr\n"
-" --max-age=epoch\n"
-" --min-age=epoch\n"
+" --max-count=<n>\n"
+" --max-age=<epoch>\n"
+" --min-age=<epoch>\n"
" --sparse\n"
" --no-merges\n"
" --remove-empty\n"
" --objects | --objects-edge\n"
" --unpacked\n"
" --header | --pretty\n"
-" --abbrev=nr | --no-abbrev\n"
+" --abbrev=<n> | --no-abbrev\n"
" --abbrev-commit\n"
" --left-right\n"
" special purpose:\n"
}
} else {
if (revs->commit_format != CMIT_FMT_USERFORMAT ||
- buf.len)
- printf("%s%c", buf.buf, info->hdr_termination);
+ buf.len) {
+ fwrite(buf.buf, 1, buf.len, stdout);
+ putchar(info->hdr_termination);
+ }
}
strbuf_release(&buf);
} else {
else
parent = commit->parents->item;
- if (allow_ff && !hashcmp(parent->object.sha1, head))
+ if (allow_ff && parent && !hashcmp(parent->object.sha1, head))
return fast_forward_to(commit->object.sha1, head);
if (parent && parse_commit(parent) < 0)
}
if (finish_command(&po))
- return error("pack-objects died with strange error");
+ return -1;
return 0;
}
#include "parse-options.h"
static const char* show_branch_usage[] = {
- "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]...",
+ "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color[=<when>] | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [(<rev> | <glob>)...]",
"git show-branch (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>]",
NULL
};
offset += bytes;
/* make sure off_t is sufficiently large not to wrap */
- if (consumed_bytes > consumed_bytes + bytes)
+ if (signed_add_overflows(consumed_bytes, bytes))
die("pack too large for current definition of off_t");
consumed_bytes += bytes;
}
}
static const char update_index_usage[] =
-"git update-index [-q] [--add] [--replace] [--remove] [--unmerged] [--refresh] [--really-refresh] [--cacheinfo] [--chmod=(+|-)x] [--assume-unchanged] [--skip-worktree|--no-skip-worktree] [--info-only] [--force-remove] [--stdin] [--index-info] [--unresolve] [--again | -g] [--ignore-missing] [-z] [--verbose] [--] <file>...";
+"git update-index [-q] [--add] [--replace] [--remove] [--unmerged] [--refresh] [--really-refresh] [--cacheinfo] [--chmod=(+|-)x] [--assume-unchanged] [--skip-worktree|--no-skip-worktree] [--info-only] [--force-remove] [--stdin] [--index-info] [--unresolve] [--again | -g] [--ignore-missing] [-z] [--verbose] [--] [<file>...]";
static unsigned char head_sha1[20];
static unsigned char merge_head_sha1[20];
else
return DT_UNKNOWN;
}
-#define canon_mode(mode) \
- (S_ISREG(mode) ? (S_IFREG | ce_permissions(mode)) : \
- S_ISLNK(mode) ? S_IFLNK : S_ISDIR(mode) ? S_IFDIR : S_IFGITLINK)
+static inline unsigned int canon_mode(unsigned int mode)
+{
+ if (S_ISREG(mode))
+ return S_IFREG | ce_permissions(mode);
+ if (S_ISLNK(mode))
+ return S_IFLNK;
+ if (S_ISDIR(mode))
+ return S_IFDIR;
+ return S_IFGITLINK;
+}
#define flexible_size(STRUCT,len) ((offsetof(struct STRUCT,name) + (len) + 8) & ~7)
#define cache_entry_size(len) flexible_size(cache_entry,len)
* at least 'nr' entries; the number of entries currently allocated
* is 'alloc', using the standard growing factor alloc_nr() macro.
*
- * DO NOT USE any expression with side-effect for 'x' or 'alloc'.
+ * DO NOT USE any expression with side-effect for 'x', 'nr', or 'alloc'.
*/
#define ALLOC_GROW(x, nr, alloc) \
do { \
*/
static int do_lstat(const char *file_name, struct stat *buf)
{
+ int err;
WIN32_FILE_ATTRIBUTE_DATA fdata;
- if (!(errno = get_file_attr(file_name, &fdata))) {
+ if (!(err = get_file_attr(file_name, &fdata))) {
buf->st_ino = 0;
buf->st_gid = 0;
buf->st_uid = 0;
buf->st_ctime = filetime_to_time_t(&(fdata.ftCreationTime));
return 0;
}
+ errno = err;
return -1;
}
askpass = askpass_program;
if (!askpass)
askpass = getenv("SSH_ASKPASS");
- if (!askpass || !(*askpass))
- return getpass(prompt);
+ if (!askpass || !(*askpass)) {
+ char *result = getpass(prompt);
+ if (!result)
+ die_errno("Could not read password");
+ return result;
+ }
args[0] = askpass;
args[1] = prompt;
(describe)
git describe HEAD ;;
(* | default)
- git describe --exact-match HEAD ;;
+ git describe --tags --exact-match HEAD ;;
esac 2>/dev/null)" ||
b="$(cut -c1-7 "$g/HEAD" 2>/dev/null)..." ||
case "$cur" in
--*)
__gitcomp "--cached --staged --pickaxe-all --pickaxe-regex
- --base --ours --theirs
+ --base --ours --theirs --no-index
$__git_diff_common_options
"
return
;;; Code:
(eval-when-compile (require 'cl)) ; to use `push', `pop'
+(require 'format-spec)
(defface git-blame-prefix-face
'((((background dark)) (:foreground "gray"
-#!/usr/bin/perl -w
+#!/usr/bin/perl
# This tool is copyright (c) 2005, Matthias Urlichs.
# It is released under the Gnu Public License, version 2.
submitTemplate = self.prepareLogMessage(template, logMessage)
if os.environ.has_key("P4DIFF"):
del(os.environ["P4DIFF"])
- diff = p4_read_pipe("diff -du ...")
+ diff = ""
+ for editedFile in editedFiles:
+ diff += p4_read_pipe("diff -du %r" % editedFile)
newdiff = ""
for newFile in filesToAdd:
-#!/usr/bin/perl -w
+#!/usr/bin/perl
#
# Copyright 2008-2009 Peter Krefting <peter@softwolves.pp.se>
#
# Globals
use strict;
+use warnings;
use integer;
my $crlfmode = 0;
my @revs;
# ---------------------------- Functions
#
-# Top level email generation function. This decides what type of update
-# this is and calls the appropriate body-generation routine after outputting
-# the common header
+# Function to prepare for email generation. This decides what type
+# of update this is and whether an email should even be generated.
#
-# Note this function doesn't actually generate any email output, that is
-# taken care of by the functions it calls:
-# - generate_email_header
-# - generate_create_XXXX_email
-# - generate_update_XXXX_email
-# - generate_delete_XXXX_email
-# - generate_email_footer
-#
-generate_email()
+prep_for_email()
{
# --- Arguments
oldrev=$(git rev-parse $1)
short_refname=${refname##refs/remotes/}
echo >&2 "*** Push-update of tracking branch, $refname"
echo >&2 "*** - no email generated."
- exit 0
+ return 1
;;
*)
# Anything else (is there anything else?)
echo >&2 "*** Unknown type of update to $refname ($rev_type)"
echo >&2 "*** - no email generated"
- exit 1
+ return 1
;;
esac
esac
echo >&2 "*** $config_name is not set so no email will be sent"
echo >&2 "*** for $refname update $oldrev->$newrev"
- exit 0
+ return 1
fi
+ return 0
+}
+
+#
+# Top level email generation function. This calls the appropriate
+# body-generation routine after outputting the common header.
+#
+# Note this function doesn't actually generate any email output, that is
+# taken care of by the functions it calls:
+# - generate_email_header
+# - generate_create_XXXX_email
+# - generate_update_XXXX_email
+# - generate_delete_XXXX_email
+# - generate_email_footer
+#
+# Note also that this function cannot 'exit' from the script; when this
+# function is running (in hook script mode), the send_mail() function
+# is already executing in another process, connected via a pipe, and
+# if this function exits without, whatever has been generated to that
+# point will be sent as an email... even if nothing has been generated.
+#
+generate_email()
+{
# Email parameters
# The email subject will contain the best description of the ref
# that we can build from the parameters
# Output to the terminal in command line mode - if someone wanted to
# resend an email; they could redirect the output to sendmail
# themselves
- PAGER= generate_email $2 $3 $1
+ prep_for_email $2 $3 $1 && PAGER= generate_email
else
while read oldrev newrev refname
do
- generate_email $oldrev $newrev $refname $maxlines | send_mail
+ prep_for_email $oldrev $newrev $refname || continue
+ generate_email $maxlines | send_mail
done
fi
fi
# don't link to a workdir
-if test -L "$git_dir/config"
+if test -h "$git_dir/config"
then
die "\"$orig_git\" is a working directory only, please specify" \
"a complete repository."
static const char daemon_usage[] =
"git daemon [--verbose] [--syslog] [--export-all]\n"
-" [--timeout=n] [--init-timeout=n] [--max-connections=n]\n"
-" [--strict-paths] [--base-path=path] [--base-path-relaxed]\n"
-" [--user-path | --user-path=path]\n"
-" [--interpolated-path=path]\n"
-" [--reuseaddr] [--detach] [--pid-file=file]\n"
-" [--[enable|disable|allow-override|forbid-override]=service]\n"
-" [--inetd | [--listen=host_or_ipaddr] [--port=n]\n"
-" [--user=user [--group=group]]\n"
-" [directory...]";
+" [--timeout=<n>] [--init-timeout=<n>] [--max-connections=<n>]\n"
+" [--strict-paths] [--base-path=<path>] [--base-path-relaxed]\n"
+" [--user-path | --user-path=<path>]\n"
+" [--interpolated-path=<path>]\n"
+" [--reuseaddr] [--detach] [--pid-file=<file>]\n"
+" [--(enable|disable|allow-override|forbid-override)=<service>]\n"
+" [--inetd | [--listen=<host_or_ipaddr>] [--port=<n>]\n"
+" [--user=<user> [--group=<group>]]\n"
+" [<directory>...]";
/* List of acceptable pathname prefixes */
static char **ok_paths;
static void diff_filespec_load_driver(struct diff_filespec *one)
{
- if (!one->driver)
+ /* Use already-loaded driver */
+ if (one->driver)
+ return;
+
+ if (S_ISREG(one->mode))
one->driver = userdiff_find_by_path(one->path);
+
+ /* Fallback to default settings */
if (!one->driver)
one->driver = userdiff_find_by_name("default");
}
{
if (!DIFF_FILE_VALID(one))
return NULL;
- if (!S_ISREG(one->mode))
- return NULL;
+
diff_filespec_load_driver(one);
if (!one->driver->textconv)
return NULL;
else if ((argcount = parse_long_opt("output", av, &optarg))) {
options->file = fopen(optarg, "w");
if (!options->file)
- die_errno("Could not open '%s'", arg + strlen("--output="));
+ die_errno("Could not open '%s'", optarg);
options->close_file = 1;
return argcount;
} else
if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) ||
(DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode)))
- return; /* no tree diffs in patch format */
+ return; /* no useful stat for tree diffs */
run_diffstat(p, o, diffstat);
}
if ((DIFF_FILE_VALID(p->one) && S_ISDIR(p->one->mode)) ||
(DIFF_FILE_VALID(p->two) && S_ISDIR(p->two->mode)))
- return; /* no tree diffs in patch format */
+ return; /* nothing to check in tree diffs */
run_checkdiff(p, o);
}
xpp.flags = 0;
xecfg.ctxlen = 3;
- xecfg.flags = XDL_EMIT_FUNCNAMES;
+ xecfg.flags = 0;
xdi_diff_outf(&mf1, &mf2, patch_id_consume, &data,
&xpp, &xecfg);
}
diff_free_filepair(p);
}
- if (opts & DIFF_PICKAXE_REGEX) {
+ if (opts & DIFF_PICKAXE_REGEX)
regfree(®ex);
- }
free(q->queue);
*q = outq;
{
struct stat st;
int fd, i;
- size_t size;
+ size_t size = 0;
char *buf, *entry;
fd = open(fname, O_RDONLY);
if (x->flags & EXC_FLAG_MUSTBEDIR) {
if (!dtype) {
- if (!prefixcmp(pathname, exclude))
+ if (!prefixcmp(pathname, exclude) &&
+ pathname[x->patternlen] == '/')
return to_exclude;
else
continue;
static char *work_tree;
static const char *git_dir;
-static char *git_object_dir, *git_index_file, *git_refs_dir, *git_graft_file;
+static char *git_object_dir, *git_index_file, *git_graft_file;
/*
* Repository-local GIT_* environment variables
static void setup_git_env(void)
{
git_dir = getenv(GIT_DIR_ENVIRONMENT);
- if (!git_dir)
+ if (!git_dir) {
git_dir = read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT);
+ git_dir = git_dir ? xstrdup(git_dir) : NULL;
+ }
if (!git_dir)
git_dir = DEFAULT_GIT_DIR_ENVIRONMENT;
git_object_dir = getenv(DB_ENVIRONMENT);
git_object_dir = xmalloc(strlen(git_dir) + 9);
sprintf(git_object_dir, "%s/objects", git_dir);
}
- git_refs_dir = xmalloc(strlen(git_dir) + 6);
- sprintf(git_refs_dir, "%s/refs", git_dir);
git_index_file = getenv(INDEX_ENVIRONMENT);
if (!git_index_file) {
git_index_file = xmalloc(strlen(git_dir) + 7);
}
static const char fast_import_usage[] =
-"git fast-import [--date-format=f] [--max-pack-size=n] [--big-file-threshold=n] [--depth=n] [--active-branches=n] [--export-marks=marks.file]";
+"git fast-import [--date-format=<f>] [--max-pack-size=<n>] [--big-file-threshold=<n>] [--depth=<n>] [--active-branches=<n>] [--export-marks=<marks.file>]";
static void parse_argv(void)
{
-#!/usr/bin/perl -w
+#!/usr/bin/perl
+use 5.008;
use strict;
+use warnings;
use Git;
binmode(STDOUT, ":raw");
SUBDIRECTORY_OK=Yes
OPTIONS_KEEPDASHDASH=
OPTIONS_SPEC="\
-git am [options] [<mbox>|<Maildir>...]
+git am [options] [(<mbox>|<Maildir>)...]
git am [options] (--resolved | --skip | --abort)
--
i,interactive run interactively
export GITHEAD_$his_tree
if test -n "$GIT_QUIET"
then
- export GIT_MERGE_VERBOSITY=0
+ GIT_MERGE_VERBOSITY=0 && export GIT_MERGE_VERBOSITY
fi
git-merge-recursive $orig_tree -- HEAD $his_tree || {
git rerere $allow_rerere_autoupdate
-#!/usr/bin/perl -w
+#!/usr/bin/perl
#
# This tool is copyright (c) 2005, Martin Langhoff.
# It is released under the Gnu Public License, version 2.
=cut
+use 5.008;
use strict;
use warnings;
use Getopt::Std;
#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
#define bitsizeof(x) (CHAR_BIT * sizeof(x))
+#define maximum_signed_value_of_type(a) \
+ (INTMAX_MAX >> (bitsizeof(intmax_t) - bitsizeof(a)))
+
+/*
+ * Signed integer overflow is undefined in C, so here's a helper macro
+ * to detect if the sum of two integers will overflow.
+ *
+ * Requires: a >= 0, typeof(a) equals typeof(b)
+ */
+#define signed_add_overflows(a, b) \
+ ((b) > maximum_signed_value_of_type(a) - (a))
+
#ifdef __GNUC__
#define TYPEOF(x) (__typeof__(x))
#else
-#!/usr/bin/perl -w
+#!/usr/bin/perl
+use 5.008;
use strict;
+use warnings;
use Getopt::Std;
use File::Temp qw(tempdir);
use Data::Dumper;
-#!/usr/bin/perl -w
+#!/usr/bin/perl
# This tool is copyright (c) 2005, Matthias Urlichs.
# It is released under the Gnu Public License, version 2.
# The head revision is on branch "origin" by default.
# You can change that with the '-o' option.
+use 5.008;
use strict;
use warnings;
use Getopt::Long;
####
####
+use 5.008;
use strict;
use warnings;
use bytes;
#
# Any arguments that are unknown to this script are forwarded to 'git diff'.
+use 5.008;
use strict;
use warnings;
use Cwd qw(abs_path);
export GITHEAD_$cmt GITHEAD_$hd
if test -n "$GIT_QUIET"
then
- export GIT_MERGE_VERBOSITY=1
+ GIT_MERGE_VERBOSITY=1 && export GIT_MERGE_VERBOSITY
fi
eval 'git-merge-$strategy' $strategy_opts '"$cmt^" -- "$hd" "$cmt"'
rv=$?
esac
strategy_opts="$strategy_opts $(git rev-parse --sq-quote "--$newopt")"
do_merge=t
- if test -n "$strategy"
- then
- strategy=recursive
- fi
;;
-s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
--strateg=*|--strategy=*|\
#
# Scan two git object-trees, and hardlink any common objects between them.
-use 5.006;
+use 5.008;
use strict;
use warnings;
use Getopt::Long;
sub usage() {
- print("Usage: git relink [--safe] <dir> [<dir> ...] <master_dir> \n");
+ print("Usage: git relink [--safe] <dir>... <master_dir> \n");
print("All directories should contain a .git/objects/ subdirectory.\n");
print("Options\n");
print("\t--safe\t" .
a pack everything in a single pack
A same as -a, and turn unreachable objects loose
d remove redundant packs, and run git-prune-packed
-f pass --no-reuse-object to git-pack-objects
+f pass --no-reuse-delta to git-pack-objects
+F pass --no-reuse-object to git-pack-objects
n do not run git-update-server-info
q,quiet be quiet
l pass --local to git-pack-objects
unpack_unreachable=--unpack-unreachable ;;
-d) remove_redundant=t ;;
-q) GIT_QUIET=t ;;
- -f) no_reuse=--no-reuse-object ;;
+ -f) no_reuse=--no-reuse-delta ;;
+ -F) no_reuse=--no-reuse-object ;;
-l) local=--local ;;
--max-pack-size|--window|--window-memory|--depth)
extra="$extra $1=$2"; shift ;;
esac
PACKDIR="$GIT_OBJECT_DIRECTORY/pack"
-PACKTMP="$GIT_OBJECT_DIRECTORY/.tmp-$$-pack"
+PACKTMP="$PACKDIR/.tmp-$$-pack"
rm -f "$PACKTMP"-*
trap 'rm -f "$PACKTMP"-*' 0 1 2 3 15
;;
esac
+mkdir -p "$PACKDIR" || exit
+
args="$args $local ${GIT_QUIET:+-q} $no_reuse$extra"
names=$(git pack-objects --keep-true-parents --honor-pack-keep --non-empty --all --reflog $args </dev/null "$PACKTMP") ||
exit 1
fi
# Ok we have prepared all new packfiles.
-mkdir -p "$PACKDIR" || exit
# First see if there are packs of the same name and if so
# if we can move them out of the way (this can happen if we
-#!/usr/bin/perl -w
+#!/usr/bin/perl
#
# Copyright 2002,2005 Greg Kroah-Hartman <greg@kroah.com>
# Copyright 2005 Ryan Anderson <ryan@michonline.com>
# and second line is the subject of the message.
#
+use 5.008;
use strict;
use warnings;
use Term::ReadLine;
--[no-]validate * Perform patch sanity checks. Default on.
--[no-]format-patch * understand any non optional arguments as
`git format-patch` ones.
+ --force * Send even if safety checks would prevent it.
EOT
exit(1);
my ($quiet, $dry_run) = (0, 0);
my $format_patch;
my $compose_filename;
+my $force = 0;
# Handle interactive edition of files.
my $multiedit;
"validate!" => \$validate,
"format-patch!" => \$format_patch,
"8bit-encoding=s" => \$auto_8bit_encoding,
+ "force" => \$force,
);
unless ($rc) {
default => "UTF-8");
}
+if (!$force) {
+ for my $f (@files) {
+ if (get_patch_subject($f) =~ /\*\*\* SUBJECT HERE \*\*\*/) {
+ die "Refusing to send because the patch\n\t$f\n"
+ . "has the template subject '*** SUBJECT HERE ***'. "
+ . "Pass --force if you really want to send.\n";
+ }
+ }
+}
+
my $prompting = 0;
if (!defined $sender) {
$sender = $repoauthor || $repocommitter || '';
sub valid_fqdn {
my $domain = shift;
- return !($^O eq 'darwin' && $domain =~ /\.local$/) && $domain =~ /\./;
+ return defined $domain && !($^O eq 'darwin' && $domain =~ /\.local$/) && $domain =~ /\./;
}
sub maildomain_net {
sub send_message {
my @recipients = unique_email_list(@to);
@cc = (grep { my $cc = extract_valid_address($_);
- not grep { $cc eq $_ } @recipients
+ not grep { $cc eq $_ || $_ =~ /<\Q${cc}\E>$/ } @recipients
}
map { sanitize_address($_) }
@cc);
s/'\''/'\''\\'\'\''/g
h
s/^author \([^<]*\) <[^>]*> .*$/\1/
- s/'\''/'\''\'\'\''/g
s/.*/GIT_AUTHOR_NAME='\''&'\''/p
g
s/^author [^<]* <\([^>]*\)> .*$/\1/
- s/'\''/'\''\'\'\''/g
s/.*/GIT_AUTHOR_EMAIL='\''&'\''/p
g
s/^author [^<]* <[^>]*> \(.*\)$/\1/
- s/'\''/'\''\'\'\''/g
s/.*/GIT_AUTHOR_DATE='\''&'\''/p
q
b_tree=
i_tree=
- # Work around rev-parse --flags eating -q
- for opt
- do
- case "$opt" in
- -q|--quiet)
- GIT_QUIET=t
- ;;
- esac
- done
-
REV=$(git rev-parse --no-flags --symbolic "$@" 2>/dev/null)
- FLAGS=$(git rev-parse --no-revs --flags "$@" 2>/dev/null)
-
- set -- $FLAGS
FLAGS=
- while test $# -ne 0
+ for opt
do
- case "$1" in
+ case "$opt" in
+ -q|--quiet)
+ GIT_QUIET=-t
+ ;;
--index)
INDEX_OPTION=--index
;;
- --)
- :
- ;;
- *)
- FLAGS="${FLAGS}${FLAGS:+ }$1"
+ -*)
+ FLAGS="${FLAGS}${FLAGS:+ }$opt"
;;
esac
- shift
done
set -- $REV
if test -n "$GIT_QUIET"
then
- export GIT_MERGE_VERBOSITY=0
+ GIT_MERGE_VERBOSITY=0 && export GIT_MERGE_VERBOSITY
fi
if git merge-recursive $b_tree -- $c_tree $w_tree
then
assert_stash_like "$@"
git checkout -b $branch $REV^ &&
- apply_stash "$@"
-
- test -z "$IS_STASH_REF" || drop_stash "$@"
+ apply_stash "$@" && {
+ test -z "$IS_STASH_REF" || drop_stash "$@"
+ }
}
PARSE_CACHE='--not-parsed'
;;
esac
+ say "Synchronizing submodule url for '$name'"
+ git config submodule."$name".url "$url"
+
if test -e "$path"/.git
then
(
- say "Synchronizing submodule url for '$name'"
- git config submodule."$name".url "$url"
clear_local_git_env
cd "$path"
remote=$(get_default_remote)
#!/usr/bin/env perl
# Copyright (C) 2006, Eric Wong <normalperson@yhbt.net>
# License: GPL v2 or later
+use 5.008;
use warnings;
use strict;
use vars qw/ $AUTHOR $VERSION
sub working_head_info {
my ($head, $refs) = @_;
- my @args = ('log', '--no-color', '--first-parent', '--pretty=medium');
+ my @args = qw/log --no-color --no-decorate --first-parent
+ --pretty=medium/;
my ($fh, $ctx) = command_output_pipe(@args, $head);
my $hash;
my %max;
sub check_cherry_pick {
my $base = shift;
my $tip = shift;
+ my $parents = shift;
my @ranges = @_;
my %commits = map { $_ => 1 }
- _rev_list("--no-merges", $tip, "--not", $base);
+ _rev_list("--no-merges", $tip, "--not", $base, @$parents);
for my $range ( @ranges ) {
delete @commits{_rev_list($range)};
}
# double check that there are no missing non-merge commits
my (@incomplete) = check_cherry_pick(
$merge_base, $merge_tip,
+ $parents,
@$ranges,
);
#include "run-command.h"
const char git_usage_string[] =
- "git [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path]\n"
+ "git [--version] [--exec-path[=<path>]] [--html-path]\n"
" [-p|--paginate|--no-pager] [--no-replace-objects]\n"
- " [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE]\n"
+ " [--bare] [--git-dir=<path>] [--work-tree=<path>]\n"
" [-c name=value] [--help]\n"
- " COMMAND [ARGS]";
+ " <command> [<args>]";
const char git_more_info_string[] =
- "See 'git help COMMAND' for more information on a specific command.";
+ "See 'git help <command>' for more information on a specific command.";
static struct startup_info git_startup_info;
static int use_pager = -1;
--- /dev/null
+[build]
+build_purelib = build/lib
+build_platlib = build/lib
#
# This program is licensed under the GPLv2
+use 5.008;
use strict;
use warnings;
use CGI qw(:standard :escapeHTML -nosticky);
if (old_name == NULL) {
debug_mm("mailmap: adding (simple) entry for %s at index %d\n", old_email, index);
/* Replace current name and new email for simple entry */
- free(me->name);
- free(me->email);
- if (new_name)
+ if (new_name) {
+ free(me->name);
me->name = xstrdup(new_name);
- if (new_email)
+ }
+ if (new_email) {
+ free(me->email);
me->email = xstrdup(new_email);
+ }
} else {
struct mailmap_info *mi = xmalloc(sizeof(struct mailmap_info));
debug_mm("mailmap: adding (complex) entry for %s at index %d\n", old_email, index);
package Git;
+use 5.008;
use strict;
{
static char path[PATH_MAX];
#ifndef WIN32
- if (!pfx || !*pfx || is_absolute_path(arg))
+ if (!pfx_len || is_absolute_path(arg))
return arg;
memcpy(path, pfx, pfx_len);
strcpy(path + pfx_len, arg);
/* don't add prefix to absolute paths, but still replace '\' by '/' */
if (is_absolute_path(arg))
pfx_len = 0;
- else
+ else if (pfx_len)
memcpy(path, pfx, pfx_len);
strcpy(path + pfx_len, arg);
for (p = path + pfx_len; *p; p++)
/* sha1:path --> object name of path in ent sha1
* :path -> object name of path in index
* :[0-3]:path -> object name of path in index at stage
+ * :/foo -> recent commit matching foo
*/
if (name[0] == ':') {
int stage = 0;
struct cache_entry *ce;
int pos;
if (namelen > 2 && name[1] == '/')
+ /* don't need mode for commit */
return get_sha1_oneline(name + 2, sha1);
if (namelen < 3 ||
name[2] != ':' ||
break;
if (ce_stage(ce) == stage) {
hashcpy(sha1, ce->sha1);
+ oc->mode = ce->ce_mode;
return 0;
}
pos++;
*
* 2. the ->buf member is a byte array that has at least ->len + 1 bytes
* allocated. The extra byte is used to store a '\0', allowing the ->buf
- * member to be a valid C-string. Every strbuf function ensure this
+ * member to be a valid C-string. Every strbuf function ensures this
* invariant is preserved.
*
* Note that it is OK to "play" with the buffer directly if you work it
$PROG file $head >.result || return 1
cat .result | perl -e '
my %expect = (@ARGV);
- my %count = ();
+ my %count = map { $_ => 0 } keys %expect;
while (<STDIN>) {
if (/^[0-9a-f]+\t\(([^\t]+)\t/) {
my $author = $1;
for ($author) { s/^\s*//; s/\s*$//; }
- if (exists $expect{$author}) {
- $count{$author}++;
- }
+ $count{$author}++;
}
}
my $bad = 0;
while (my ($author, $count) = each %count) {
my $ok;
- if ($expect{$author} != $count) {
+ my $value = 0;
+ $value = $expect{$author} if defined $expect{$author};
+ if ($value != $count) {
$bad = 1;
$ok = "bad";
}
else {
$ok = "good";
}
- print STDERR "Author $author (expected $expect{$author}, attributed $count) $ok\n";
+ print STDERR "Author $author (expected $value, attributed $count) $ok\n";
}
exit($bad);
' "$@"
test_done
fi
-perl -MEncode -e 'decode_utf8("", Encode::FB_CROAK)' >/dev/null 2>&1 || {
+perl -MEncode -e '$e="";decode_utf8($e, Encode::FB_CROAK)' >/dev/null 2>&1 || {
skip_all='skipping gitweb tests, perl version is too old'
test_done
}
'
test_expect_success POSIXPERM,SANITY 'write-tree should notice unwritable repository' '
-
- (
- chmod a-w .git/objects .git/objects/?? &&
- test_must_fail git write-tree
- )
- status=$?
- chmod 775 .git/objects .git/objects/??
- (exit $status)
-
+ test_when_finished "chmod 775 .git/objects .git/objects/??" &&
+ chmod a-w .git/objects .git/objects/?? &&
+ test_must_fail git write-tree
'
test_expect_success POSIXPERM,SANITY 'commit should notice unwritable repository' '
-
- (
- chmod a-w .git/objects .git/objects/?? &&
- test_must_fail git commit -m second
- )
- status=$?
- chmod 775 .git/objects .git/objects/??
- (exit $status)
-
+ test_when_finished "chmod 775 .git/objects .git/objects/??" &&
+ chmod a-w .git/objects .git/objects/?? &&
+ test_must_fail git commit -m second
'
test_expect_success POSIXPERM,SANITY 'update-index should notice unwritable repository' '
-
- (
- echo 6O >file &&
- chmod a-w .git/objects .git/objects/?? &&
- test_must_fail git update-index file
- )
- status=$?
- chmod 775 .git/objects .git/objects/??
- (exit $status)
-
+ test_when_finished "chmod 775 .git/objects .git/objects/??" &&
+ echo 6O >file &&
+ chmod a-w .git/objects .git/objects/?? &&
+ test_must_fail git update-index file
'
test_expect_success POSIXPERM,SANITY 'add should notice unwritable repository' '
-
- (
- echo b >file &&
- chmod a-w .git/objects .git/objects/?? &&
- test_must_fail git add file
- )
- status=$?
- chmod 775 .git/objects .git/objects/??
- (exit $status)
-
+ test_when_finished "chmod 775 .git/objects .git/objects/??" &&
+ echo b >file &&
+ chmod a-w .git/objects .git/objects/?? &&
+ test_must_fail git add file
'
test_done
cat >expected <<-\EOF &&
100644 77f0ba1734ed79d12881f81b36ee134de6a3327b 0 init.t
100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 sub/added
+ 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 subsub/added
EOF
cat >expected.swt <<-\EOF &&
H init.t
H sub/added
+ H subsub/added
EOF
test_commit init &&
echo modified >>init.t &&
- mkdir sub &&
- touch sub/added &&
- git add init.t sub/added &&
+ mkdir sub subsub &&
+ touch sub/added subsub/added &&
+ git add init.t sub/added subsub/added &&
git commit -m "modified and added" &&
git tag top &&
git rm sub/added &&
cat >expected.swt-noinit <<-\EOF &&
S init.t
H sub/added
+ S subsub/added
EOF
echo sub/ > .git/info/sparse-checkout &&
cat >expected.swt-nosub <<-\EOF &&
H init.t
S sub/added
+ S subsub/added
EOF
echo init.t >.git/info/sparse-checkout &&
test_expect_success 'master@{n} for various n' '
N=$(git reflog | wc -l) &&
- Nm1=$((N-1)) &&
- Np1=$((N+1)) &&
+ Nm1=$(($N-1)) &&
+ Np1=$(($N+1)) &&
git rev-parse --verify master@{0} &&
git rev-parse --verify master@{1} &&
git rev-parse --verify master@{$Nm1} &&
100644 $ONE_SHA1 0 me
EOF
-export GIT_DIR="$TRASH_DIRECTORY/.git"
-export GIT_WORK_TREE=/
+GIT_DIR="$TRASH_DIRECTORY/.git" && export GIT_DIR
+GIT_WORK_TREE=/ && export GIT_WORK_TREE
test_vars 'abs gitdir, root' "$GIT_DIR" "/" ""
test_foobar_root
test_expect_success 'go to /' 'cd /'
-export GIT_DIR="$(echo $TRASH_DIRECTORY|sed 's,^/,,')/.git"
-export GIT_WORK_TREE=/
+GIT_DIR="$(echo $TRASH_DIRECTORY|sed 's,^/,,')/.git" && export GIT_DIR
+GIT_WORK_TREE=/ && export GIT_WORK_TREE
test_vars 'rel gitdir, root' "$GIT_DIR" "/" ""
test_foobar_root
test_expect_success 'go to /foo' 'cd /foo'
-export GIT_DIR="../$TRASH_DIRECTORY/.git"
-export GIT_WORK_TREE=/
+GIT_DIR="../$TRASH_DIRECTORY/.git" && export GIT_DIR
+GIT_WORK_TREE=/ && export GIT_WORK_TREE
test_vars 'rel gitdir, foo' "$TRASH_DIRECTORY/.git" "/" "foo/"
test_foobar_foo
test_expect_success 'go to /foo/bar' 'cd /foo/bar'
-export GIT_DIR="../../$TRASH_DIRECTORY/.git"
-export GIT_WORK_TREE=/
+GIT_DIR="../../$TRASH_DIRECTORY/.git" && export GIT_DIR
+GIT_WORK_TREE=/ && export GIT_WORK_TREE
test_vars 'rel gitdir, foo/bar' "$TRASH_DIRECTORY/.git" "/" "foo/bar/"
test_foobar_foobar
test_expect_success 'go to /' 'cd /'
-export GIT_DIR="$(echo $TRASH_DIRECTORY|sed 's,^/,,')/.git"
-export GIT_WORK_TREE=.
+GIT_DIR="$(echo $TRASH_DIRECTORY|sed 's,^/,,')/.git" && export GIT_DIR
+GIT_WORK_TREE=. && export GIT_WORK_TREE
test_vars 'rel gitdir, root' "$GIT_DIR" "/" ""
test_foobar_root
test_expect_success 'go to /' 'cd /foo'
-export GIT_DIR="../$TRASH_DIRECTORY/.git"
-export GIT_WORK_TREE=..
+GIT_DIR="../$TRASH_DIRECTORY/.git" && export GIT_DIR
+GIT_WORK_TREE=.. && export GIT_WORK_TREE
test_vars 'rel gitdir, foo' "$TRASH_DIRECTORY/.git" "/" "foo/"
test_foobar_foo
test_expect_success 'go to /foo/bar' 'cd /foo/bar'
-export GIT_DIR="../../$TRASH_DIRECTORY/.git"
-export GIT_WORK_TREE=../..
+GIT_DIR="../../$TRASH_DIRECTORY/.git" && export GIT_DIR
+GIT_WORK_TREE=../.. && export GIT_WORK_TREE
test_vars 'rel gitdir, foo/bar' "$TRASH_DIRECTORY/.git" "/" "foo/bar/"
test_foobar_foobar
'git ls-files --error-unmatch foo bar'
test_done
-1
esac
'
+test_expect_success 'rebase -s funny -Xopt' '
+ test_when_finished "rm -fr test-bin funny.was.run" &&
+ mkdir test-bin &&
+ cat >test-bin/git-merge-funny <<-EOF &&
+ #!$SHELL_PATH
+ case "\$1" in --opt) ;; *) exit 2 ;; esac
+ shift &&
+ >funny.was.run &&
+ exec git merge-recursive "\$@"
+ EOF
+ chmod +x test-bin/git-merge-funny &&
+ git reset --hard &&
+ git checkout -b test-funny master^ &&
+ test_commit funny &&
+ (
+ PATH=./test-bin:$PATH
+ git rebase -s funny -Xopt master
+ ) &&
+ test -f funny.was.run
+'
+
test_done
echo 1 >file1 &&
git add -u &&
test_tick &&
- git commit -m "fixup! first"
+ git commit -m "fixup! first" &&
git tag $1 &&
test_tick &&
echo 1 >file1 &&
git add -u &&
test_tick &&
- git commit -m "squash! first"
+ git commit -m "squash! first" &&
git tag $1 &&
test_tick &&
echo 1 >file1 &&
git add -u &&
test_tick &&
- git commit -m "squash! forst"
+ git commit -m "squash! forst" &&
git tag final-missquash &&
test_tick &&
git rebase --autosquash -i HEAD^^^ &&
--- /dev/null
+#!/bin/bash
+
+test_description='git rebase - test patch id computation'
+
+. ./test-lib.sh
+
+test_set_prereq NOT_EXPENSIVE
+test -n "$GIT_PATCHID_TIMING_TESTS" && test_set_prereq EXPENSIVE
+test -x /usr/bin/time && test_set_prereq USR_BIN_TIME
+
+count()
+{
+ i=0
+ while test $i -lt $1
+ do
+ echo "$i"
+ i=$(($i+1))
+ done
+}
+
+scramble()
+{
+ i=0
+ while read x
+ do
+ if test $i -ne 0
+ then
+ echo "$x"
+ fi
+ i=$(((i+1) % 10))
+ done < "$1" > "$1.new"
+ mv -f "$1.new" "$1"
+}
+
+run()
+{
+ echo \$ "$@"
+ /usr/bin/time "$@" >/dev/null
+}
+
+test_expect_success 'setup' '
+ git commit --allow-empty -m initial
+ git tag root
+'
+
+do_tests()
+{
+ pr=$1
+ nlines=$2
+
+ test_expect_success $pr "setup: $nlines lines" "
+ rm -f .gitattributes &&
+ git checkout -q -f master &&
+ git reset --hard root &&
+ count $nlines >file &&
+ git add file &&
+ git commit -q -m initial &&
+ git branch -f other &&
+
+ scramble file &&
+ git add file &&
+ git commit -q -m 'change big file' &&
+
+ git checkout -q other &&
+ : >newfile &&
+ git add newfile &&
+ git commit -q -m 'add small file' &&
+
+ git cherry-pick master >/dev/null 2>&1
+ "
+
+ test_debug "
+ run git diff master^\!
+ "
+
+ test_expect_success $pr 'setup attributes' "
+ echo 'file binary' >.gitattributes
+ "
+
+ test_debug "
+ run git format-patch --stdout master &&
+ run git format-patch --stdout --ignore-if-in-upstream master
+ "
+
+ test_expect_success $pr 'detect upstream patch' "
+ git checkout -q master &&
+ scramble file &&
+ git add file &&
+ git commit -q -m 'change big file again' &&
+ git checkout -q other^{} &&
+ git rebase master &&
+ test_must_fail test -n \"\$(git rev-list master...HEAD~)\"
+ "
+
+ test_expect_success $pr 'do not drop patch' "
+ git branch -f squashed master &&
+ git checkout -q -f squashed &&
+ git reset -q --soft HEAD~2 &&
+ git commit -q -m squashed &&
+ git checkout -q other^{} &&
+ test_must_fail git rebase squashed &&
+ rm -rf .git/rebase-apply
+ "
+}
+
+do_tests NOT_EXPENSIVE 500
+do_tests EXPENSIVE 50000
+
+test_done
test_must_fail git cherry-pick --ff -m 3 C
'
+test_expect_success 'cherry pick a root commit with --ff' '
+ git reset --hard first -- &&
+ git rm file1 &&
+ echo first >file2 &&
+ git add file2 &&
+ git commit --amend -m "file2" &&
+ git cherry-pick --ff first &&
+ test "$(git rev-parse --verify HEAD)" = "1df192cd8bc58a2b275d842cede4d221ad9000d1"
+'
+
test_done
git stash drop
'
+test_expect_success 'stash branch should not drop the stash if the branch exists' '
+ git stash clear &&
+ echo foo >file &&
+ git add file &&
+ git commit -m initial &&
+ echo bar >file &&
+ git stash &&
+ test_must_fail git stash branch master stash@{0} &&
+ git rev-parse stash@{0} --
+'
+
test_done
test_must_fail git diff --no-index pinky brain > output 2> output.err &&
grep narf output &&
! grep error output.err'
+
+test_expect_success SYMLINKS 'setup symlinks with attributes' '
+ echo "*.bin diff=bin" >>.gitattributes &&
+ echo content >file.bin &&
+ ln -s file.bin link.bin &&
+ git add -N file.bin link.bin
+'
+
+cat >expect <<'EOF'
+diff --git a/file.bin b/file.bin
+index e69de29..d95f3ad 100644
+Binary files a/file.bin and b/file.bin differ
+diff --git a/link.bin b/link.bin
+index e69de29..dce41ec 120000
+--- a/link.bin
++++ b/link.bin
+@@ -0,0 +1 @@
++file.bin
+\ No newline at end of file
+EOF
+test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' '
+ git config diff.bin.binary true &&
+ git diff file.bin link.bin >actual &&
+ test_cmp expect actual
+'
+
test_done
tree1=`git write-tree` &&
test "$tree1" = "$tree0"'
-nul_to_q() {
- perl -pe 'y/\000/Q/'
-}
-
test_expect_success 'diff --no-index with binary creation' '
echo Q | q_to_nul >binary &&
(: hide error code from diff, which just indicates differences
'
+# Start testing the colored format for whitespace checks
+
+test_expect_success 'setup diff colors' '
+ git config color.diff always &&
+ git config color.diff.plain normal &&
+ git config color.diff.meta bold &&
+ git config color.diff.frag cyan &&
+ git config color.diff.func normal &&
+ git config color.diff.old red &&
+ git config color.diff.new green &&
+ git config color.diff.commit yellow &&
+ git config color.diff.whitespace "normal red" &&
+
+ git config core.autocrlf false
+'
+cat >expected <<\EOF
+<BOLD>diff --git a/x b/x<RESET>
+<BOLD>index 9daeafb..2874b91 100644<RESET>
+<BOLD>--- a/x<RESET>
+<BOLD>+++ b/x<RESET>
+<CYAN>@@ -1 +1,4 @@<RESET>
+ test<RESET>
+<GREEN>+<RESET><GREEN>{<RESET>
+<GREEN>+<RESET><BRED> <RESET>
+<GREEN>+<RESET><GREEN>}<RESET>
+EOF
+
+test_expect_success 'diff that introduces a line with only tabs' '
+ git config core.whitespace blank-at-eol &&
+ git reset --hard &&
+ echo "test" > x &&
+ git commit -m "initial" x &&
+ echo "{NTN}" | tr "NT" "\n\t" >> x &&
+ git -c color.diff=always diff | test_decode_color >current &&
+ test_cmp expected current
+'
+
test_done
sed 's/beer\\/beer,\\/' < Beer.java > Beer-correct.java
-builtin_patterns="bibtex cpp csharp html java objc pascal php python ruby tex"
+builtin_patterns="bibtex cpp csharp fortran html java objc pascal php python ruby tex"
for p in $builtin_patterns
do
test_expect_success "builtin $p pattern compiles" '
EOF
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 330b04f..5ed8eff 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 330b04f..5ed8eff 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1,3 +1,7 @@<RESET>
<RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET>
'
cat > expect <<EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 330b04f..5ed8eff 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 330b04f..5ed8eff 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1,3 +1,7 @@<RESET>
<RED>[-h(4)-]<RESET><GREEN>{+h(4),hh[44]+}<RESET>
'
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 330b04f..5ed8eff 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 330b04f..5ed8eff 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1 +1 @@<RESET>
<RED>h(4)<RESET><GREEN>h(4),hh[44]<RESET>
<CYAN>@@ -3,0 +4,4 @@<RESET> <RESET><MAGENTA>a = b + c<RESET>
'
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 330b04f..5ed8eff 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 330b04f..5ed8eff 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1,3 +1,7 @@<RESET>
h(4),<GREEN>hh<RESET>[44]
'
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 330b04f..5ed8eff 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 330b04f..5ed8eff 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1,3 +1,7 @@<RESET>
h(4)<GREEN>,hh[44]<RESET>
'
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 330b04f..5ed8eff 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 330b04f..5ed8eff 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1,3 +1,7 @@<RESET>
h(4),<GREEN>{+hh+}<RESET>[44]
'
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 330b04f..5ed8eff 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 330b04f..5ed8eff 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1,3 +1,7 @@<RESET>
h(4),<GREEN>hh[44<RESET>]
echo 'aaa (aaa) aaa' > post
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index c29453b..be22f37 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index c29453b..be22f37 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1 +1 @@<RESET>
aaa (aaa) <GREEN>aaa<RESET>
EOF
echo '(' > post
cat > expect <<\EOF
-<WHITE>diff --git a/pre b/post<RESET>
-<WHITE>index 289cb9d..2d06f37 100644<RESET>
-<WHITE>--- a/pre<RESET>
-<WHITE>+++ b/post<RESET>
+<BOLD>diff --git a/pre b/post<RESET>
+<BOLD>index 289cb9d..2d06f37 100644<RESET>
+<BOLD>--- a/pre<RESET>
+<BOLD>+++ b/post<RESET>
<CYAN>@@ -1 +1 @@<RESET>
(<RED>:<RESET>
EOF
git diff-tree -p -C master binary >C.diff &&
git diff-tree -p --binary master binary >BF.diff &&
- git diff-tree -p --binary -C master binary >CF.diff
+ git diff-tree -p --binary -C master binary >CF.diff &&
+
+ git diff-tree -p --full-index master binary >B-index.diff &&
+ git diff-tree -p -C --full-index master binary >C-index.diff &&
+
+ git init other-repo &&
+ (cd other-repo &&
+ git fetch .. master &&
+ git reset --hard FETCH_HEAD
+ )
"
test_expect_success 'stat binary diff -- should not fail.' \
'do_reset &&
test_must_fail git apply --index C.diff'
+test_expect_success 'apply binary diff with full-index' '
+ do_reset &&
+ git apply B-index.diff
+'
+
+test_expect_success 'apply binary diff with full-index (copy)' '
+ do_reset &&
+ git apply C-index.diff
+'
+
+test_expect_success 'apply full-index binary diff in new repo' '
+ (cd other-repo &&
+ do_reset &&
+ test_must_fail git apply ../B-index.diff)
+'
+
test_expect_success 'apply binary diff without replacement.' \
'do_reset &&
git apply BF.diff'
. ./test-lib.sh
+fuzz_blame () {
+ sed "
+ s/$_x05[0-9a-f][0-9a-f][0-9a-f]/OBJID/g
+ s/$_x05[0-9a-f][0-9a-f]/OBJI/g
+ s/[-0-9]\{10\} [:0-9]\{8\} [-+][0-9]\{4\}/DATE/g
+ " "$@"
+}
+
test_expect_success setup '
echo one >one &&
git add one &&
git commit -m initial &&
echo two >>one &&
git add one &&
+ test_tick &&
git commit --author "nick1 <bugs@company.xx>" -m second
'
EOF
test_expect_success 'mailmap.file set' '
- mkdir internal_mailmap &&
+ mkdir -p internal_mailmap &&
echo "Internal Guy <bugs@company.xx>" > internal_mailmap/.mailmap &&
git config mailmap.file internal_mailmap/.mailmap &&
git shortlog HEAD >actual &&
test_cmp expect actual
'
+cat >expect <<\EOF
+Internal Guy (1):
+ second
+
+Repo Guy (1):
+ initial
+
+EOF
+
+test_expect_success 'name entry after email entry' '
+ mkdir -p internal_mailmap &&
+ echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap &&
+ echo "Internal Guy <bugs@company.xx>" >>internal_mailmap/.mailmap &&
+ git shortlog HEAD >actual &&
+ test_cmp expect actual
+'
+
+cat >expect <<\EOF
+Internal Guy (1):
+ second
+
+Repo Guy (1):
+ initial
+
+EOF
+
+test_expect_success 'name entry after email entry, case-insensitive' '
+ mkdir -p internal_mailmap &&
+ echo "<bugs@company.xy> <bugs@company.xx>" >internal_mailmap/.mailmap &&
+ echo "Internal Guy <BUGS@Company.xx>" >>internal_mailmap/.mailmap &&
+ git shortlog HEAD >actual &&
+ test_cmp expect actual
+'
+
cat >expect <<\EOF
A U Thor (1):
initial
EOF
test_expect_success 'No mailmap files, but configured' '
- rm .mailmap &&
+ rm -f .mailmap internal_mailmap/.mailmap &&
git shortlog HEAD >actual &&
test_cmp expect actual
'
test_tick &&
git commit --author "CTO <cto@coompany.xx>" -m seventh &&
- mkdir internal_mailmap &&
+ mkdir -p internal_mailmap &&
echo "Committed <committer@example.com>" > internal_mailmap/.mailmap &&
echo "<cto@company.xx> <cto@coompany.xx>" >> internal_mailmap/.mailmap &&
echo "Some Dude <some@dude.xx> nick1 <bugs@company.xx>" >> internal_mailmap/.mailmap &&
# git blame
cat >expect <<\EOF
-^3a2fdcb (A U Thor 2005-04-07 15:13:13 -0700 1) one
-7de6f99b (Some Dude 2005-04-07 15:13:13 -0700 2) two
-5815879d (Other Author 2005-04-07 15:14:13 -0700 3) three
-ff859d96 (Other Author 2005-04-07 15:15:13 -0700 4) four
-5ab6d4fa (Santa Claus 2005-04-07 15:16:13 -0700 5) five
-38a42d8b (Santa Claus 2005-04-07 15:17:13 -0700 6) six
-8ddc0386 (CTO 2005-04-07 15:18:13 -0700 7) seven
+^OBJI (A U Thor DATE 1) one
+OBJID (Some Dude DATE 2) two
+OBJID (Other Author DATE 3) three
+OBJID (Other Author DATE 4) four
+OBJID (Santa Claus DATE 5) five
+OBJID (Santa Claus DATE 6) six
+OBJID (CTO DATE 7) seven
EOF
-
test_expect_success 'Blame output (complex mapping)' '
git blame one >actual &&
- test_cmp expect actual
+ fuzz_blame actual >actual.fuzz &&
+ test_cmp expect actual.fuzz
'
test_done
}
GET() {
- export REQUEST_METHOD="GET" &&
+ REQUEST_METHOD="GET" && export REQUEST_METHOD &&
run_backend "/repo.git/$1" &&
unset REQUEST_METHOD &&
if ! grep "Status" act.out >act
}
POST() {
- export REQUEST_METHOD="POST" &&
- export CONTENT_TYPE="application/x-$1-request" &&
+ REQUEST_METHOD="POST" && export REQUEST_METHOD &&
+ CONTENT_TYPE="application/x-$1-request" && export CONTENT_TYPE &&
run_backend "/repo.git/$1" "$2" &&
unset REQUEST_METHOD &&
unset CONTENT_TYPE &&
. "$TEST_DIRECTORY"/t556x_common
expect_aliased() {
- export REQUEST_METHOD="GET" &&
+ REQUEST_METHOD="GET" && export REQUEST_METHOD &&
if test $1 = 0; then
run_backend "$2"
else
}
SMART=smart
-export GIT_HTTP_EXPORT_ALL=1
+GIT_HTTP_EXPORT_ALL=1 && export GIT_HTTP_EXPORT_ALL
test_expect_success 'direct refs/heads/master not found' '
log_div "refs/heads/master"
GET refs/heads/master "404 Not Found"
get_static_files "200 OK"
'
SMART=smart
-export GIT_HTTP_EXPORT_ALL=1
+GIT_HTTP_EXPORT_ALL=1 && export GIT_HTTP_EXPORT_ALL
test_expect_success 'static file if http.getanyfile true is ok' '
log_div "getanyfile true"
config http.getanyfile true &&
commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
EOF
+test_expect_success '%x00 shows NUL' '
+ echo >expect commit f58db70b055c5718631e5c61528b28b12090cdea &&
+ echo >>expect fooQbar &&
+ git rev-list -1 --format=foo%x00bar HEAD >actual.nul &&
+ nul_to_q <actual.nul >actual &&
+ test_cmp expect actual
+'
+
test_expect_success '%ad respects --date=' '
echo 2005-04-07 >expect.ad-short &&
git log -1 --date=short --pretty=tformat:%ad >output.ad-short master &&
test_expect_success "merge without conflict" \
"git merge-file test.txt orig.txt new2.txt"
+test_expect_success 'works in subdirectory' '
+ mkdir dir &&
+ cp new1.txt dir/a.txt &&
+ cp orig.txt dir/o.txt &&
+ cp new2.txt dir/b.txt &&
+ ( cd dir && git merge-file a.txt o.txt b.txt )
+'
+
cp new1.txt test.txt
test_expect_success "merge without conflict (--quiet)" \
"git merge-file --quiet test.txt orig.txt new2.txt"
git branch tofetch $HASH6 &&
(
cd clone_dir &&
- git fetch origin refs/heads/tofetch:refs/heads/parallel3
- git log --pretty=oneline parallel3 | grep $PARA3
- git show $PARA3 | grep "A U Thor"
+ git fetch origin refs/heads/tofetch:refs/heads/parallel3 &&
+ git log --pretty=oneline parallel3 > output.txt &&
+ ! grep $PARA3 output.txt &&
+ git show $PARA3 > para3.txt &&
+ grep "A U Thor" para3.txt &&
+ git fetch origin "refs/replace/*:refs/replace/*" &&
+ git log --pretty=oneline parallel3 > output.txt &&
+ grep $PARA3 output.txt &&
+ git show $PARA3 > para3.txt &&
+ grep "O Thor" para3.txt
)
'
#!/usr/bin/perl
+use 5.008;
use strict;
use warnings;
use IO::Pty;
git commit -m "submodule"
) &&
git clone super super-clone &&
- (cd super-clone && git submodule update --init)
+ (cd super-clone && git submodule update --init) &&
+ git clone super empty-clone &&
+ (cd empty-clone && git submodule init)
'
test_expect_success 'change submodule' '
)
'
+test_expect_success '"git submodule sync" should update submodule URLs if not yet cloned' '
+ (cd empty-clone &&
+ git pull &&
+ git submodule sync &&
+ test -d "$(git config submodule.submodule.url)"
+ )
+'
+
test_done
test_cmp important c1.c
'
+cat >expect <<\EOF
+error: Untracked working tree file 'c0.c' would be overwritten by merge.
+fatal: read-tree failed
+EOF
+
+test_expect_success 'will not overwrite untracked file on unborn branch' '
+ git reset --hard c0 &&
+ git rm -fr . &&
+ git checkout --orphan new &&
+ cp important c0.c &&
+ test_must_fail git merge c0 2>out &&
+ test_cmp out expect &&
+ test_path_is_missing .git/MERGE_HEAD &&
+ test_cmp important c0.c
+'
+
test_done
cat >helper <<'EOF'
#!/bin/sh
-sed 's/^/converted: /' "$@"
+grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; }
+sed 's/^bin: /converted: /' "$1"
EOF
chmod +x helper
test_expect_success 'setup ' '
- echo test 1 >one.bin &&
- echo test number 2 >two.bin &&
+ echo "bin: test 1" >one.bin &&
+ echo "bin: test number 2" >two.bin &&
+ if test_have_prereq SYMLINKS; then
+ ln -s one.bin symlink.bin
+ fi &&
git add . &&
GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" &&
- echo test 1 version 2 >one.bin &&
- echo test number 2 version 2 >>two.bin &&
+ echo "bin: test 1 version 2" >one.bin &&
+ echo "bin: test number 2 version 2" >>two.bin &&
+ if test_have_prereq SYMLINKS; then
+ ln -sf two.bin symlink.bin
+ fi &&
GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00"
'
cat >expected <<EOF
-(Number2 2010-01-01 20:00:00 +0000 1) test 1 version 2
+(Number2 2010-01-01 20:00:00 +0000 1) bin: test 1 version 2
EOF
test_expect_success 'no filter specified' '
'
test_expect_success 'make a new commit' '
- echo "test number 2 version 3" >>two.bin &&
+ echo "bin: test number 2 version 3" >>two.bin &&
GIT_AUTHOR_NAME=Number3 git commit -a -m Third --date="2010-01-01 22:00:00"
'
test_cmp expected result
'
+cat >expected <<EOF
+(Number2 2010-01-01 20:00:00 +0000 1) two.bin
+EOF
+
+test_expect_success SYMLINKS 'blame with --no-textconv (on symlink)' '
+ git blame --no-textconv symlink.bin >blame &&
+ find_blame <blame >result &&
+ test_cmp expected result
+'
+
+test_expect_success SYMLINKS 'blame --textconv (on symlink)' '
+ git blame --textconv symlink.bin >blame &&
+ find_blame <blame >result &&
+ test_cmp expected result
+'
+
+# cp two.bin three.bin and make small tweak
+# (this will direct blame -C -C three.bin to consider two.bin and symlink.bin)
+test_expect_success SYMLINKS 'make another new commit' '
+ cat >three.bin <<\EOF &&
+bin: test number 2
+bin: test number 2 version 2
+bin: test number 2 version 3
+bin: test number 3
+EOF
+ git add three.bin &&
+ GIT_AUTHOR_NAME=Number4 git commit -a -m Fourth --date="2010-01-01 23:00:00"
+'
+
+test_expect_success SYMLINKS 'blame on last commit (-C -C, symlink)' '
+ git blame -C -C three.bin >blame &&
+ find_blame <blame >result &&
+ cat >expected <<\EOF &&
+(Number1 2010-01-01 18:00:00 +0000 1) converted: test number 2
+(Number2 2010-01-01 20:00:00 +0000 2) converted: test number 2 version 2
+(Number3 2010-01-01 22:00:00 +0000 3) converted: test number 2 version 3
+(Number4 2010-01-01 23:00:00 +0000 4) converted: test number 3
+EOF
+ test_cmp expected result
+'
+
test_done
cat >helper <<'EOF'
#!/bin/sh
-sed 's/^/converted: /' "$@"
+grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; }
+sed 's/^bin: /converted: /' "$1"
EOF
chmod +x helper
test_expect_success 'setup ' '
- echo test >one.bin &&
+ echo "bin: test" >one.bin &&
+ if test_have_prereq SYMLINKS; then
+ ln -s one.bin symlink.bin
+ fi &&
git add . &&
GIT_AUTHOR_NAME=Number1 git commit -a -m First --date="2010-01-01 18:00:00" &&
- echo test version 2 >one.bin &&
+ echo "bin: test version 2" >one.bin &&
GIT_AUTHOR_NAME=Number2 git commit -a -m Second --date="2010-01-01 20:00:00"
'
'
cat >expected <<EOF
-test version 2
+bin: test version 2
EOF
test_expect_success 'cat-file without --textconv' '
'
cat >expected <<EOF
-test
+bin: test
EOF
test_expect_success 'cat-file without --textconv on previous commit' '
git cat-file --textconv HEAD^:one.bin >result &&
test_cmp expected result
'
+
+test_expect_success SYMLINKS 'cat-file without --textconv (symlink)' '
+ git cat-file blob :symlink.bin >result &&
+ printf "%s" "one.bin" >expected
+ test_cmp expected result
+'
+
+
+test_expect_success SYMLINKS 'cat-file --textconv on index (symlink)' '
+ ! git cat-file --textconv :symlink.bin 2>result &&
+ cat >expected <<\EOF &&
+fatal: git cat-file --textconv: unable to run textconv on :symlink.bin
+EOF
+ test_cmp expected result
+'
+
+test_expect_success SYMLINKS 'cat-file --textconv on HEAD (symlink)' '
+ ! git cat-file --textconv HEAD:symlink.bin 2>result &&
+ cat >expected <<EOF &&
+fatal: git cat-file --textconv: unable to run textconv on HEAD:symlink.bin
+EOF
+ test_cmp expected result
+'
+
test_done
--to=nobody@example.com \
--in-reply-to=" " \
--smtp-server="$(pwd)/fake.sendmail" \
- $patches
+ $patches \
2>errors
! grep "^In-Reply-To: < *>" msgtxt1
'
test_cmp expected actual
'
+# Note that the patches in this test are deliberately out of order; we
+# want to make sure it works even if the cover-letter is not in the
+# first mail.
+test_expect_success 'refusing to send cover letter template' '
+ clean_fake_sendmail &&
+ rm -fr outdir &&
+ git format-patch --cover-letter -2 -o outdir &&
+ test_must_fail git send-email \
+ --from="Example <nobody@example.com>" \
+ --to=nobody@example.com \
+ --smtp-server="$(pwd)/fake.sendmail" \
+ outdir/0002-*.patch \
+ outdir/0000-*.patch \
+ outdir/0001-*.patch \
+ 2>errors >out &&
+ grep "SUBJECT HERE" errors &&
+ test -z "$(ls msgtxt*)"
+'
+
+test_expect_success '--force sends cover letter template anyway' '
+ clean_fake_sendmail &&
+ rm -fr outdir &&
+ git format-patch --cover-letter -2 -o outdir &&
+ git send-email \
+ --force \
+ --from="Example <nobody@example.com>" \
+ --to=nobody@example.com \
+ --smtp-server="$(pwd)/fake.sendmail" \
+ outdir/0002-*.patch \
+ outdir/0000-*.patch \
+ outdir/0001-*.patch \
+ 2>errors >out &&
+ ! grep "SUBJECT HERE" errors &&
+ test -n "$(ls msgtxt*)"
+'
+
test_done
git svn set-tree --find-copies-harder --rmdir \
${remotes_git_svn}..mybranch5 &&
svn_cmd up "$SVN_TREE" &&
- test -L "$SVN_TREE"/exec.sh'
+ test -h "$SVN_TREE"/exec.sh'
name='new symlink is added to a file that was also just made executable'
${remotes_git_svn}..mybranch5 &&
svn_cmd up "$SVN_TREE" &&
test -x "$SVN_TREE"/bar/zzz &&
- test -L "$SVN_TREE"/exec-2.sh'
+ test -h "$SVN_TREE"/exec-2.sh'
name='modify a symlink to become a file'
test_expect_success "$name" '
${remotes_git_svn}..mybranch5 &&
svn_cmd up "$SVN_TREE" &&
test -f "$SVN_TREE"/exec-2.sh &&
- test ! -L "$SVN_TREE"/exec-2.sh &&
+ test ! -h "$SVN_TREE"/exec-2.sh &&
test_cmp help "$SVN_TREE"/exec-2.sh'
name="commit with UTF-8 message: locale: $GIT_SVN_LC_ALL"
test_expect_success '"bar" is an empty file' 'test -f x/bar && ! test -s x/bar'
test_expect_success 'get "bar" => symlink fix from svn' \
'(cd x && git svn rebase)'
-test_expect_success SYMLINKS '"bar" becomes a symlink' 'test -L x/bar'
+test_expect_success SYMLINKS '"bar" becomes a symlink' 'test -h x/bar'
test_expect_success 'clone using git svn' 'git svn clone -r1 "$svnrepo" y'
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2010 Steven Walter
+#
+
+test_description='git svn merge detection'
+. ./lib-git-svn.sh
+
+test_expect_success 'initialize source svn repo' '
+ svn_cmd mkdir -m x "$svnrepo"/trunk &&
+ svn_cmd mkdir -m x "$svnrepo"/branches &&
+ svn_cmd co "$svnrepo"/trunk "$SVN_TREE" &&
+ (
+ cd "$SVN_TREE" &&
+ touch foo &&
+ svn add foo &&
+ svn commit -m "initial commit" &&
+ svn cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch1 &&
+ touch bar &&
+ svn add bar &&
+ svn commit -m x &&
+ svn cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch2 &&
+ svn switch "$svnrepo"/branches/branch1 &&
+ touch baz &&
+ svn add baz &&
+ svn commit -m x &&
+ svn switch "$svnrepo"/trunk &&
+ svn merge "$svnrepo"/branches/branch1 &&
+ svn commit -m "merge" &&
+ svn switch "$svnrepo"/branches/branch1 &&
+ svn commit -m x &&
+ svn switch "$svnrepo"/branches/branch2 &&
+ svn merge "$svnrepo"/branches/branch1 &&
+ svn commit -m "merge branch1" &&
+ svn switch "$svnrepo"/trunk &&
+ svn merge "$svnrepo"/branches/branch2 &&
+ svn resolved baz &&
+ svn commit -m "merge branch2"
+ ) &&
+ rm -rf "$SVN_TREE"
+'
+
+test_expect_success 'clone svn repo' '
+ git svn init -s "$svnrepo" &&
+ git svn fetch
+'
+
+test_expect_success 'verify merge commit' 'git rev-parse HEAD^2'
+
+test_done
#!/usr/bin/perl
use lib (split(/:/, $ENV{GITPERLLIB}));
-use 5.006002;
+use 5.008;
use warnings;
use strict;
}
test_decode_color () {
- sed -e 's/.\[1m/<WHITE>/g' \
- -e 's/.\[31m/<RED>/g' \
- -e 's/.\[32m/<GREEN>/g' \
- -e 's/.\[33m/<YELLOW>/g' \
- -e 's/.\[34m/<BLUE>/g' \
- -e 's/.\[35m/<MAGENTA>/g' \
- -e 's/.\[36m/<CYAN>/g' \
- -e 's/.\[m/<RESET>/g'
+ awk '
+ function name(n) {
+ if (n == 0) return "RESET";
+ if (n == 1) return "BOLD";
+ if (n == 30) return "BLACK";
+ if (n == 31) return "RED";
+ if (n == 32) return "GREEN";
+ if (n == 33) return "YELLOW";
+ if (n == 34) return "BLUE";
+ if (n == 35) return "MAGENTA";
+ if (n == 36) return "CYAN";
+ if (n == 37) return "WHITE";
+ if (n == 40) return "BLACK";
+ if (n == 41) return "BRED";
+ if (n == 42) return "BGREEN";
+ if (n == 43) return "BYELLOW";
+ if (n == 44) return "BBLUE";
+ if (n == 45) return "BMAGENTA";
+ if (n == 46) return "BCYAN";
+ if (n == 47) return "BWHITE";
+ }
+ {
+ while (match($0, /\x1b\[[0-9;]*m/) != 0) {
+ printf "%s<", substr($0, 1, RSTART-1);
+ codes = substr($0, RSTART+2, RLENGTH-3);
+ if (length(codes) == 0)
+ printf "%s", name(0)
+ else {
+ n = split(codes, ary, ";");
+ sep = "";
+ for (i = 1; i <= n; i++) {
+ printf "%s%s", sep, name(ary[i]);
+ sep = ";"
+ }
+ }
+ printf ">";
+ $0 = substr($0, RSTART + RLENGTH, length($0) - RSTART - RLENGTH + 1);
+ }
+ print
+ }
+ '
+}
+
+nul_to_q () {
+ perl -pe 'y/\000/Q/'
}
q_to_nul () {
#include "list-objects.h"
#include "run-command.h"
-static const char upload_pack_usage[] = "git upload-pack [--strict] [--timeout=nn] <dir>";
+static const char upload_pack_usage[] = "git upload-pack [--strict] [--timeout=<n>] <dir>";
/* bits #0..7 in revision.h, #8..10 in commit.c */
#define THEY_HAVE (1u << 11)
#define PATTERNS(name, pattern, word_regex) \
{ name, NULL, -1, { pattern, REG_EXTENDED }, word_regex }
+#define IPATTERN(name, pattern, word_regex) \
+ { name, NULL, -1, { pattern, REG_EXTENDED | REG_ICASE }, word_regex }
static struct userdiff_driver builtin_drivers[] = {
+IPATTERN("fortran",
+ "!^([C*]|[ \t]*!)\n"
+ "!^[ \t]*MODULE[ \t]+PROCEDURE[ \t]\n"
+ "^[ \t]*((END[ \t]+)?(PROGRAM|MODULE|BLOCK[ \t]+DATA"
+ "|([^'\" \t]+[ \t]+)*(SUBROUTINE|FUNCTION))[ \t]+[A-Z].*)$",
+ /* -- */
+ "[a-zA-Z][a-zA-Z0-9_]*"
+ "|\\.([Ee][Qq]|[Nn][Ee]|[Gg][TtEe]|[Ll][TtEe]|[Tt][Rr][Uu][Ee]|[Ff][Aa][Ll][Ss][Ee]|[Aa][Nn][Dd]|[Oo][Rr]|[Nn]?[Ee][Qq][Vv]|[Nn][Oo][Tt])\\."
+ /* numbers and format statements like 2E14.4, or ES12.6, 9X.
+ * Don't worry about format statements without leading digits since
+ * they would have been matched above as a variable anyway. */
+ "|[-+]?[0-9.]+([AaIiDdEeFfLlTtXx][Ss]?[-+]?[0-9.]*)?(_[a-zA-Z0-9][a-zA-Z0-9_]*)?"
+ "|//|\\*\\*|::|[/<>=]="
+ "|[^[:space:]]|[\x80-\xff]+"),
PATTERNS("html", "^[ \t]*(<[Hh][1-6][ \t].*>.*)$",
"[^<>= \t]+|[^[:space:]]|[\x80-\xff]+"),
PATTERNS("java",
{ "default", NULL, -1, { NULL, 0 } },
};
#undef PATTERNS
+#undef IPATTERN
static struct userdiff_driver driver_true = {
"diff=true",
}
}
+ if (trailing_whitespace == -1)
+ trailing_whitespace = len;
+
/* Check indentation */
- for (i = 0; i < len; i++) {
+ for (i = 0; i < trailing_whitespace; i++) {
if (line[i] == ' ')
continue;
if (line[i] != '\t')
* Now the rest of the line starts at "written".
* The non-highlighted part ends at "trailing_whitespace".
*/
- if (trailing_whitespace == -1)
- trailing_whitespace = len;
/* Emit non-highlighted (middle) segment. */
if (trailing_whitespace - written > 0) {
fill_directory(&dir, s->pathspec);
for (i = 0; i < dir.nr; i++) {
struct dir_entry *ent = dir.entries[i];
- if (!cache_name_is_other(ent->name, ent->len))
- continue;
- if (!match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL))
- continue;
- string_list_insert(&s->untracked, ent->name);
+ if (cache_name_is_other(ent->name, ent->len) &&
+ match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL))
+ string_list_insert(&s->untracked, ent->name);
free(ent);
}
fill_directory(&dir, s->pathspec);
for (i = 0; i < dir.nr; i++) {
struct dir_entry *ent = dir.entries[i];
- if (!cache_name_is_other(ent->name, ent->len))
- continue;
- if (!match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL))
- continue;
- string_list_insert(&s->ignored, ent->name);
+ if (cache_name_is_other(ent->name, ent->len) &&
+ match_pathspec(s->pathspec, ent->name, ent->len, 0, NULL))
+ string_list_insert(&s->ignored, ent->name);
free(ent);
}
}
return -1;
}
-static void xdl_find_func(xdfile_t *xf, long i, char *buf, long sz, long *ll,
- find_func_t ff, void *ff_priv) {
-
- /*
- * Be quite stupid about this for now. Find a line in the old file
- * before the start of the hunk (and context) which starts with a
- * plausible character.
- */
-
- const char *rec;
- long len;
-
- while (i-- > 0) {
- len = xdl_get_rec(xf, i, &rec);
- if ((*ll = ff(rec, len, buf, sz, ff_priv)) >= 0)
- return;
- }
- *ll = 0;
-}
-
-
static int xdl_emit_common(xdfenv_t *xe, xdchange_t *xscr, xdemitcb_t *ecb,
xdemitconf_t const *xecfg) {
xdfile_t *xdf = &xe->xdf1;
xdchange_t *xch, *xche;
char funcbuf[80];
long funclen = 0;
+ long funclineprev = -1;
find_func_t ff = xecfg->find_func ? xecfg->find_func : def_ff;
if (xecfg->flags & XDL_EMIT_COMMON)
*/
if (xecfg->flags & XDL_EMIT_FUNCNAMES) {
- xdl_find_func(&xe->xdf1, s1, funcbuf,
- sizeof(funcbuf), &funclen,
- ff, xecfg->find_func_priv);
+ long l;
+ for (l = s1 - 1; l >= 0 && l > funclineprev; l--) {
+ const char *rec;
+ long reclen = xdl_get_rec(&xe->xdf1, l, &rec);
+ long newfunclen = ff(rec, reclen, funcbuf,
+ sizeof(funcbuf),
+ xecfg->find_func_priv);
+ if (newfunclen >= 0) {
+ funclen = newfunclen;
+ break;
+ }
+ }
+ funclineprev = s1 - 1;
}
if (xdl_emit_hunk_hdr(s1 + 1, e1 - s1, s2 + 1, e2 - s2,
funcbuf, funclen, ecb) < 0)
#define XDL_MAX(a, b) ((a) > (b) ? (a): (b))
#define XDL_ABS(v) ((v) >= 0 ? (v): -(v))
#define XDL_ISDIGIT(c) ((c) >= '0' && (c) <= '9')
+#define XDL_ISSPACE(c) (isspace((unsigned char)(c)))
#define XDL_ADDBITS(v,b) ((v) + ((v) >> (b)))
#define XDL_MASKBITS(b) ((1UL << (b)) - 1)
#define XDL_HASHLONG(v,b) (XDL_ADDBITS((unsigned long)(v), b) & XDL_MASKBITS(b))
static int line_contains_alnum(const char *ptr, long size)
{
while (size--)
- if (isalnum(*(ptr++)))
+ if (isalnum((unsigned char)*(ptr++)))
return 1;
return 0;
}
if (l1[i1++] != l2[i2++])
return 0;
skip_ws:
- while (i1 < s1 && isspace(l1[i1]))
+ while (i1 < s1 && XDL_ISSPACE(l1[i1]))
i1++;
- while (i2 < s2 && isspace(l2[i2]))
+ while (i2 < s2 && XDL_ISSPACE(l2[i2]))
i2++;
}
} else if (flags & XDF_IGNORE_WHITESPACE_CHANGE) {
while (i1 < s1 && i2 < s2) {
- if (isspace(l1[i1]) && isspace(l2[i2])) {
+ if (XDL_ISSPACE(l1[i1]) && XDL_ISSPACE(l2[i2])) {
/* Skip matching spaces and try again */
- while (i1 < s1 && isspace(l1[i1]))
+ while (i1 < s1 && XDL_ISSPACE(l1[i1]))
i1++;
- while (i2 < s2 && isspace(l2[i2]))
+ while (i2 < s2 && XDL_ISSPACE(l2[i2]))
i2++;
continue;
}
* while there still are characters remaining on both lines.
*/
if (i1 < s1) {
- while (i1 < s1 && isspace(l1[i1]))
+ while (i1 < s1 && XDL_ISSPACE(l1[i1]))
i1++;
if (s1 != i1)
return 0;
}
if (i2 < s2) {
- while (i2 < s2 && isspace(l2[i2]))
+ while (i2 < s2 && XDL_ISSPACE(l2[i2]))
i2++;
return (s2 == i2);
}
char const *ptr = *data;
for (; ptr < top && *ptr != '\n'; ptr++) {
- if (isspace(*ptr)) {
+ if (XDL_ISSPACE(*ptr)) {
const char *ptr2 = ptr;
int at_eol;
- while (ptr + 1 < top && isspace(ptr[1])
+ while (ptr + 1 < top && XDL_ISSPACE(ptr[1])
&& ptr[1] != '\n')
ptr++;
at_eol = (top <= ptr + 1 || ptr[1] == '\n');
projects / thirdparty / git.git / commitdiff
