Jonathan Nieder [Thu, 5 Dec 2019 09:28:28 +0000 (01:28 -0800)]
submodule: defend against submodule.update = !command in .gitmodules
In v2.15.4, we started to reject `submodule.update` settings in
`.gitmodules`. Let's raise a BUG if it somehow still made it through
from anywhere but the Git config.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
In v2.20.x, Git clones submodules recursively by first creating the
submodules' gitdirs and _then_ "updating" the submodules. This can lead
to the situation where the clone path is taken because the directory
(while it exists already) is not a git directory, but then the clone
fails because that gitdir is unexpectedly already a directory.
This _also_ works around the vulnerability that was fixed in "Disallow
dubiously-nested submodule git directories", but it produces a different
error message than the one expected by the test case, therefore we
adjust the test case accordingly.
Note: as the two submodules "race each other", there are actually two
possible error messages, therefore we have to teach the test case to
expect _two_ possible (and good) outcomes in addition to the one it
expected before.
Note: this workaround is only necessary for the v2.20.x release train;
The behavior changed again in v2.21.x so that the original test case's
expectations are met again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
Jonathan Nieder [Thu, 5 Dec 2019 09:30:43 +0000 (01:30 -0800)]
fsck: reject submodule.update = !command in .gitmodules
This allows hosting providers to detect whether they are being used
to attack users using malicious 'update = !command' settings in
.gitmodules.
Since ac1fbbda2013 (submodule: do not copy unknown update mode from
.gitmodules, 2013-12-02), in normal cases such settings have been
treated as 'update = none', so forbidding them should not produce any
collateral damage to legitimate uses. A quick search does not reveal
any repositories making use of this construct, either.
Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
This is a companion patch to 'mingw: handle `subst`-ed "DOS drives"':
use the DOS drive prefix handling that is already provided by
`compat/mingw.c` (and which just learned to handle non-alphabetical
"drive letters").
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
Jonathan Nieder [Thu, 5 Dec 2019 09:28:28 +0000 (01:28 -0800)]
submodule: reject submodule.update = !command in .gitmodules
Since ac1fbbda2013 (submodule: do not copy unknown update mode from
.gitmodules, 2013-12-02), Git has been careful to avoid copying
[submodule "foo"]
update = !run an arbitrary scary command
from .gitmodules to a repository's local config, copying in the
setting 'update = none' instead. The gitmodules(5) manpage documents
the intention:
The !command form is intentionally ignored here for security
reasons
Unfortunately, starting with v2.20.0-rc0 (which integrated ee69b2a9
(submodule--helper: introduce new update-module-mode helper,
2018-08-13, first released in v2.20.0-rc0)), there are scenarios where
we *don't* ignore it: if the config store contains no
submodule.foo.update setting, the submodule-config API falls back to
reading .gitmodules and the repository-supplied !command gets run
after all.
This was part of a general change over time in submodule support to
read more directly from .gitmodules, since unlike .git/config it
allows a project to change values between branches and over time
(while still allowing .git/config to override things). But it was
never intended to apply to this kind of dangerous configuration.
The behavior change was not advertised in ee69b2a9's commit message
and was missed in review.
Let's take the opportunity to make the protection more robust, even in
Git versions that are technically not affected: instead of quietly
converting 'update = !command' to 'update = none', noisily treat it as
an error. Allowing the setting but treating it as meaning something
else was just confusing; users are better served by seeing the error
sooner. Forbidding the construct makes the semantics simpler and
means we can check for it in fsck (in a separate patch).
As a result, the submodule-config API cannot read this value from
.gitmodules under any circumstance, and we can declare with confidence
For security reasons, the '!command' form is not accepted
here.
Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
* maint-2.14: (28 commits)
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
...
While the only permitted drive letters for physical drives on Windows
are letters of the US-English alphabet, this restriction does not apply
to virtual drives assigned via `subst <letter>: <path>`.
To prevent targeted attacks against systems where "funny" drive letters
such as `1` or `!` are assigned, let's handle them as regular drive
letters on Windows.
This fixes CVE-2019-1351.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, filenames cannot have trailing spaces or periods, when
opening such paths, they are stripped automatically. Read: you can open
the file `README` via the file name `README . . .`. This ambiguity can
be used in combination with other security bugs to cause e.g. remote
code execution during recursive clones. This patch series fixes that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch fixes a vulnerability in the Windows-specific code where a
submodule names ending in a backslash were quoted incorrectly, and that
bug could be abused to insert command-line parameters e.g. to `ssh` in a
recursive clone.
Note: this bug is Windows-only, as we have to construct a command line
for the process-to-spawn, unlike Linux/macOS, where `execv()` accepts an
already-split command line.
While at it, other quoting issues are fixed as well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch series makes it safe to use Git on Windows drives, even if
running on a mounted network share or within the Windows Subsystem for
Linux (WSL).
This topic branch addresses CVE-2019-1353.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Over a decade ago, in 25fe217b86c (Windows: Treat Windows style path
names., 2008-03-05), Git was taught to handle absolute Windows paths,
i.e. paths that start with a drive letter and a colon.
Unbeknownst to us, while drive letters of physical drives are limited to
letters of the English alphabet, there is a way to assign virtual drive
letters to arbitrary directories, via the `subst` command, which is
_not_ limited to English letters.
It is therefore possible to have absolute Windows paths of the form
`1:\what\the\hex.txt`. Even "better": pretty much arbitrary Unicode
letters can also be used, e.g. `ä:\tschibät.sch`.
While it can be sensibly argued that users who set up such funny drive
letters really seek adverse consequences, the Windows Operating System
is known to be a platform where many users are at the mercy of
administrators who have their very own idea of what constitutes a
reasonable setup.
Therefore, let's just make sure that such funny paths are still
considered absolute paths by Git, on Windows.
In addition to Unicode characters, pretty much any character is a valid
drive letter, as far as `subst` is concerned, even `:` and `"` or even a
space character. While it is probably the opposite of smart to use them,
let's safeguard `is_dos_drive_prefix()` against all of them.
Note: `[::1]:repo` is a valid URL, but not a valid path on Windows.
As `[` is now considered a valid drive letter, we need to be very
careful to avoid misinterpreting such a string as valid local path in
`url_is_local_not_ssh()`. To do that, we use the just-introduced
function `is_valid_path()` (which will label the string as invalid file
name because of the colon characters).
This fixes CVE-2019-1351.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch series plugs an attack vector we had overlooked in our
December 2014 work on `core.protectNTFS`.
Essentially, the path `.git::$INDEX_ALLOCATION/config` is interpreted as
`.git/config` when NTFS Alternate Data Streams are available (which they
are on Windows, and at least on network shares that are SMB-mounted on
macOS).
Needless to say: we don't want that.
In fact, we want to stay on the very safe side and not even special-case
the `$INDEX_ALLOCATION` stream type: let's just prevent Git from
touching _any_ explicitly specified Alternate Data Stream of `.git`.
In essence, we'll prevent Git from tracking, or writing to, any path
with a segment of the form `.git:<anything>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
mingw: refuse to access paths with trailing spaces or periods
When creating a directory on Windows whose path ends in a space or a
period (or chains thereof), the Win32 API "helpfully" trims those. For
example, `mkdir("abc ");` will return success, but actually create a
directory called `abc` instead.
This stems back to the DOS days, when all file names had exactly 8
characters plus exactly 3 characters for the file extension, and the
only way to have shorter names was by padding with spaces.
Sadly, this "helpful" behavior is a bit inconsistent: after a successful
`mkdir("abc ");`, a `mkdir("abc /def")` will actually _fail_ (because
the directory `abc ` does not actually exist).
Even if it would work, we now have a serious problem because a Git
repository could contain directories `abc` and `abc `, and on Windows,
they would be "merged" unintentionally.
As these paths are illegal on Windows, anyway, let's disallow any
accesses to such paths on that Operating System.
For practical reasons, this behavior is still guarded by the
config setting `core.protectNTFS`: it is possible (and at least two
regression tests make use of it) to create commits without involving the
worktree. In such a scenario, it is of course possible -- even on
Windows -- to create such file names.
Among other consequences, this patch disallows submodules' paths to end
in spaces on Windows (which would formerly have confused Git enough to
try to write into incorrect paths, anyway).
While this patch does not fix a vulnerability on its own, it prevents an
attack vector that was exploited in demonstrations of a number of
recently-fixed security bugs.
The regression test added to `t/t7417-submodule-path-url.sh` reflects
that attack vector.
Note that we have to adjust the test case "prevent git~1 squatting on
Windows" in `t/t7415-submodule-names.sh` because of a very subtle issue.
It tries to clone two submodules whose names differ only in a trailing
period character, and as a consequence their git directories differ in
the same way. Previously, when Git tried to clone the second submodule,
it thought that the git directory already existed (because on Windows,
when you create a directory with the name `b.` it actually creates `b`),
but with this patch, the first submodule's clone will fail because of
the illegal name of the git directory. Therefore, when cloning the
second submodule, Git will take a different code path: a fresh clone
(without an existing git directory). Both code paths fail to clone the
second submodule, both because the the corresponding worktree directory
exists and is not empty, but the error messages are worded differently.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
quote-stress-test: offer to test quoting arguments for MSYS2 sh
It is unfortunate that we need to quote arguments differently on
Windows, depending whether we build a command-line for MSYS2's `sh` or
for other Windows executables.
We already have a test helper to verify the latter, with this patch we
can also verify the former.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
mingw: refuse to access paths with illegal characters
Certain characters are not admissible in file names on Windows, even if
Cygwin/MSYS2 (and therefore, Git for Windows' Bash) pretend that they
are, e.g. `:`, `<`, `>`, etc
Let's disallow those characters explicitly in Windows builds of Git.
Note: just like trailing spaces or periods, it _is_ possible on Windows
to create commits adding files with such illegal characters, as long as
the operation leaves the worktree untouched. To allow for that, we
continue to guard `is_valid_win32_path()` behind the config setting
`core.protectNTFS`, so that users _can_ continue to do that, as long as
they turn the protections off via that config setting.
Among other problems, this prevents Git from trying to write to an "NTFS
Alternate Data Stream" (which refers to metadata stored alongside a
file, under a special name: "<filename>:<stream-name>"). This fix
therefore also prevents an attack vector that was exploited in
demonstrations of a number of recently-fixed security bugs.
Further reading on illegal characters in Win32 filenames:
https://docs.microsoft.com/en-us/windows/win32/fileio/naming-a-file
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
A `git clone` will end with exit code 0 when `merged_entry()` returns a
positive value during a call of `unpack_trees()` to `traverse_trees()`.
The reason is that `unpack_trees()` will interpret a positive value not
to be an error.
The problem is, however, that `add_index_entry()` (which is called by
`merged_entry()` can report an error, and we really should fail the
entire clone in such a case.
Let's fix this problem, in preparation for a Windows-specific patch
disallowing `mkdir()` with directory names that contain a trailing space
(which is illegal on NTFS): we want `git clone` to abort when a path
cannot be checked out due to that condition.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
t6130/t9350: prepare for stringent Win32 path validation
On Windows, file names cannot contain asterisks nor newline characters.
In an upcoming commit, we will make this limitation explicit,
disallowing even the creation of commits that introduce such file names.
However, in the test scripts touched by this patch, we _know_ that those
paths won't be checked out, so we _want_ to allow such file names.
Happily, the stringent path validation will be guarded via the
`core.protectNTFS` flag, so all we need to do is to force that flag off
temporarily.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
quote-stress-test: accept arguments to test via the command-line
When the stress test reported a problem with quoting certain arguments,
it is helpful to have a facility to play with those arguments in order
to find out whether variations of those arguments are affected, too.
Let's allow `test-run-command quote-stress-test -- <args>` to be used
for that purpose.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
tests: add a helper to stress test argument quoting
On Windows, we have to do all the command-line argument quoting
ourselves. Worse: we have to have two versions of said quoting, one for
MSYS2 programs (which have their own dequoting rules) and the rest.
We care mostly about the rest, and to make sure that that works, let's
have a stress test that comes up with all kinds of awkward arguments,
verifying that a spawned sub-process receives those unharmed.
Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Currently it is technically possible to let a submodule's git
directory point right into the git dir of a sibling submodule.
Example: the git directories of two submodules with the names `hippo`
and `hippo/hooks` would be `.git/modules/hippo/` and
`.git/modules/hippo/hooks/`, respectively, but the latter is already
intended to house the former's hooks.
In most cases, this is just confusing, but there is also a (quite
contrived) attack vector where Git can be fooled into mistaking remote
content for file contents it wrote itself during a recursive clone.
Let's plug this bug.
To do so, we introduce the new function `validate_submodule_git_dir()`
which simply verifies that no git dir exists for any leading directories
of the submodule name (if there are any).
Note: this patch specifically continues to allow sibling modules names
of the form `core/lib`, `core/doc`, etc, as long as `core` is not a
submodule name.
This fixes CVE-2019-1387.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Back in the DOS days, in the FAT file system, file names always
consisted of a base name of length 8 plus a file extension of length 3.
Shorter file names were simply padded with spaces to the full 8.3
format.
Later, the FAT file system was taught to support _also_ longer names,
with an 8.3 "short name" as primary file name. While at it, the same
facility allowed formerly illegal file names, such as `.git` (empty base
names were not allowed), which would have the "short name" `git~1`
associated with it.
For backwards-compatibility, NTFS supports alternative 8.3 short
filenames, too, even if starting with Windows Vista, they are only
generated on the system drive by default.
We addressed the problem that the `.git/` directory can _also_ be
accessed via `git~1/` (when short names are enabled) in 2b4c6efc821
(read-cache: optionally disallow NTFS .git variants, 2014-12-16), i.e.
since Git v1.9.5, by introducing the config setting `core.protectNTFS`
and enabling it by default on Windows.
In the meantime, Windows 10 introduced the "Windows Subsystem for Linux"
(short: WSL), i.e. a way to run Linux applications/distributions in a
thinly-isolated subsystem on Windows (giving rise to many a "2016 is the
Year of Linux on the Desktop" jokes). WSL is getting increasingly
popular, also due to the painless way Linux application can operate
directly ("natively") on files on Windows' file system: the Windows
drives are mounted automatically (e.g. `C:` as `/mnt/c/`).
Taken together, this means that we now have to enable the safe-guards of
Git v1.9.5 also in WSL: it is possible to access a `.git` directory
inside `/mnt/c/` via the 8.3 name `git~1` (unless short name generation
was disabled manually). Since regular Linux distributions run in WSL,
this means we have to enable `core.protectNTFS` at least on Linux, too.
To enable Services for Macintosh in Windows NT to store so-called
resource forks, NTFS introduced "Alternate Data Streams". Essentially,
these constitute additional metadata that are connected to (and copied
with) their associated files, and they are accessed via pseudo file
names of the form `filename:<stream-name>:<stream-type>`.
In a recent patch, we extended `core.protectNTFS` to also protect
against accesses via NTFS Alternate Data Streams, e.g. to prevent
contents of the `.git/` directory to be "tracked" via yet another
alternative file name.
While it is not possible (at least by default) to access files via NTFS
Alternate Data Streams from within WSL, the defaults on macOS when
mounting network shares via SMB _do_ allow accessing files and
directories in that way. Therefore, we need to enable `core.protectNTFS`
on macOS by default, too, and really, on any Operating System that can
mount network shares via SMB/CIFS.
A couple of approaches were considered for fixing this:
1. We could perform a dynamic NTFS check similar to the `core.symlinks`
check in `init`/`clone`: instead of trying to create a symbolic link
in the `.git/` directory, we could create a test file and try to
access `.git/config` via 8.3 name and/or Alternate Data Stream.
2. We could simply "flip the switch" on `core.protectNTFS`, to make it
"on by default".
The obvious downside of 1. is that it won't protect worktrees that were
clone with a vulnerable Git version already. We considered patching code
paths that check out files to check whether we're running on an NTFS
system dynamically and persist the result in the repository-local config
setting `core.protectNTFS`, but in the end decided that this solution
would be too fragile, and too involved.
The obvious downside of 2. is that everybody will have to "suffer" the
performance penalty incurred from calling `is_ntfs_dotgit()` on every
path, even in setups where.
After the recent work to accelerate `is_ntfs_dotgit()` in most cases,
it looks as if the time spent on validating ten million random
file names increases only negligibly (less than 20ms, well within the
standard deviation of ~50ms). Therefore the benefits outweigh the cost.
Another downside of this is that paths that might have been acceptable
previously now will be forbidden. Realistically, though, this is an
improvement because public Git hosters already would reject any `git
push` that contains such file names.
Note: There might be a similar problem mounting HFS+ on Linux. However,
this scenario has been considered unlikely and in light of the cost (in
the aforementioned benchmark, `core.protectHFS = true` increased the
time from ~440ms to ~610ms), it was decided _not_ to touch the default
of `core.protectHFS`.
This change addresses CVE-2019-1353.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com> Helped-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
path: also guard `.gitmodules` against NTFS Alternate Data Streams
We just safe-guarded `.git` against NTFS Alternate Data Stream-related
attack vectors, and now it is time to do the same for `.gitmodules`.
Note: In the added regression test, we refrain from verifying all kinds
of variations between short names and NTFS Alternate Data Streams: as
the new code disallows _all_ Alternate Data Streams of `.gitmodules`, it
is enough to test one in order to know that all of them are guarded
against.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We need to be careful to follow proper quoting rules. For example, if an
argument contains spaces, we have to quote them. Double-quotes need to
be escaped. Backslashes need to be escaped, but only if they are
followed by a double-quote character.
We need to be _extra_ careful to consider the case where an argument
ends in a backslash _and_ needs to be quoted: in this case, we append a
double-quote character, i.e. the backslash now has to be escaped!
The current code, however, fails to recognize that, and therefore can
turn an argument that ends in a single backslash into a quoted argument
that now ends in an escaped double-quote character. This allows
subsequent command-line parameters to be split and part of them being
mistaken for command-line options, e.g. through a maliciously-crafted
submodule URL during a recursive clone.
Technically, we would not need to quote _all_ arguments which end in a
backslash _unless_ the argument needs to be quoted anyway. For example,
`test\` would not need to be quoted, while `test \` would need to be.
To keep the code simple, however, and therefore easier to reason about
and ensure its correctness, we now _always_ quote an argument that ends
in a backslash.
This addresses CVE-2019-1350.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Previously, this function was written without focusing on speed,
intending to make reviewing the code as easy as possible, to avoid any
bugs in this critical code.
Turns out: we can do much better on both accounts. With this patch, we
make it as fast as this developer can make it go:
- We avoid the call to `is_dir_sep()` and make all the character
comparisons explicit.
- We avoid the cost of calling `strncasecmp()` and unroll the test for
`.git` and `git~1`, not even using `tolower()` because it is faster to
compare against two constant values.
- We look for `.git` and `.git~1` first thing, and return early if not
found.
- We also avoid calling a separate function for detecting chains of
spaces and periods.
Each of these improvements has a noticeable impact on the speed of
`is_ntfs_dotgit()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
path: safeguard `.git` against NTFS Alternate Streams Accesses
Probably inspired by HFS' resource streams, NTFS supports "Alternate
Data Streams": by appending `:<stream-name>` to the file name,
information in addition to the file contents can be written and read,
information that is copied together with the file (unless copied to a
non-NTFS location).
These Alternate Data Streams are typically used for things like marking
an executable as having just been downloaded from the internet (and
hence not necessarily being trustworthy).
In addition to a stream name, a stream type can be appended, like so:
`:<stream-name>:<stream-type>`. Unless specified, the default stream
type is `$DATA` for files and `$INDEX_ALLOCATION` for directories. In
other words, `.git::$INDEX_ALLOCATION` is a valid way to reference the
`.git` directory!
In our work in Git v2.2.1 to protect Git on NTFS drives under
`core.protectNTFS`, we focused exclusively on NTFS short names, unaware
of the fact that NTFS Alternate Data Streams offer a similar attack
vector.
Let's fix this.
Seeing as it is better to be safe than sorry, we simply disallow paths
referring to *any* NTFS Alternate Data Stream of `.git`, not just
`::$INDEX_ALLOCATION`. This also simplifies the implementation.
This closes CVE-2019-1352.
Further reading about NTFS Alternate Data Streams:
https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-fscc/c54dec26-1551-4d3a-a0ea-4fa40f848eb3
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The config setting `core.protectNTFS` is specifically designed to work
not only on Windows, but anywhere, to allow for repositories hosted on,
say, Linux servers to be protected against NTFS-specific attack vectors.
As a consequence, `is_ntfs_dotgit()` manually splits backslash-separated
paths (but does not do the same for paths separated by forward slashes),
under the assumption that the backslash might not be a valid directory
separator on the _current_ Operating System.
However, the two callers, `verify_path()` and `fsck_tree()`, are
supposed to feed only individual path segments to the `is_ntfs_dotgit()`
function.
This causes a lot of duplicate scanning (and very inefficient scanning,
too, as the inner loop of `is_ntfs_dotgit()` was optimized for
readability rather than for speed.
Let's simplify the design of `is_ntfs_dotgit()` by putting the burden of
splitting the paths by backslashes as directory separators on the
callers of said function.
Consequently, the `verify_path()` function, which already splits the
path by directory separators, now treats backslashes as directory
separators _explicitly_ when `core.protectNTFS` is turned on, even on
platforms where the backslash is _not_ a directory separator.
Note that we have to repeat some code in `verify_path()`: if the
backslash is not a directory separator on the current Operating System,
we want to allow file names like `\`, but we _do_ want to disallow paths
that are clearly intended to cause harm when the repository is cloned on
Windows.
The `fsck_tree()` function (the other caller of `is_ntfs_dotgit()`) now
needs to look for backslashes in tree entries' names specifically when
`core.protectNTFS` is turned on. While it would be tempting to
completely disallow backslashes in that case (much like `fsck` reports
names containing forward slashes as "full paths"), this would be
overzealous: when `core.protectNTFS` is turned on in a non-Windows
setup, backslashes are perfectly valid characters in file names while we
_still_ want to disallow tree entries that are clearly designed to
exploit NTFS-specific behavior.
This simplification will make subsequent changes easier to implement,
such as turning `core.protectNTFS` on by default (not only on Windows)
or protecting against attack vectors involving NTFS Alternate Data
Streams.
Incidentally, this change allows for catching malicious repositories
that contain tree entries of the form `dir\.gitmodules` already on the
server side rather than only on the client side (and previously only on
Windows): in contrast to `is_ntfs_dotgit()`, the
`is_ntfs_dotgitmodules()` function already expects the caller to split
the paths by directory separators.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
test-path-utils: offer to run a protectNTFS/protectHFS benchmark
In preparation to flipping the default on `core.protectNTFS`, let's have
some way to measure the speed impact of this config setting reliably
(and for comparison, the `core.protectHFS` config setting).
where the arguments are an optional number of file names to test with,
optionally followed by minimum and maximum length of the random file
names. The default values are one million, 3 and 20, respectively.
Just like `sqrti()` in `bisect.c`, we introduce a very simple function
to approximation the square root of a given value, in order to avoid
having to introduce the first user of `<math.h>` in Git's source code.
Note: this is _not_ implemented as a Unix shell script in t/perf/
because we really care about _very_ precise timings here, and Unix shell
scripts are simply unsuited for precise and consistent benchmarking.
Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This patch series fixes an issue where Git could formerly have been
tricked into creating a `.git` file with an unexpected (and therefore
unprotected) NTFS short name.
Incidentally, it also fixes an issue where a tree entry containing a
backslash could be tricked into following a symbolic link, i.e. Git
could be tricked into writing files outside the worktree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `--export-marks` option of `git fast-import` is exposed also via the
in-stream command `feature export-marks=...` and it allows overwriting
arbitrary paths.
This topic branch prevents the in-stream version, to prevent arbitrary
file accesses by `git fast-import` streams coming from untrusted sources
(e.g. in remote helpers that are based on `git fast-import`).
This fixes CVE-2019-1348.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
mingw: disallow backslash characters in tree objects' file names
The backslash character is not a valid part of a file name on Windows.
Hence it is dangerous to allow writing files that were unpacked from
tree objects, when the stored file name contains a backslash character:
it will be misinterpreted as directory separator.
This not only causes ambiguity when a tree contains a blob `a\b` and a
tree `a` that contains a blob `b`, but it also can be used as part of an
attack vector to side-step the careful protections against writing into
the `.git/` directory during a clone of a maliciously-crafted
repository.
Let's prevent that, addressing CVE-2019-1354.
Note: we guard against backslash characters in tree objects' file names
_only_ on Windows (because on other platforms, even on those where NTFS
volumes can be mounted, the backslash character is _not_ a directory
separator), and _only_ when `core.protectNTFS = true` (because users
might need to generate tree objects for other platforms, of course
without touching the worktree, e.g. using `git update-index
--cacheinfo`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
clone --recurse-submodules: prevent name squatting on Windows
In addition to preventing `.git` from being tracked by Git, on Windows
we also have to prevent `git~1` from being tracked, as the default NTFS
short name (also known as the "8.3 filename") for the file name `.git`
is `git~1`, otherwise it would be possible for malicious repositories to
write directly into the `.git/` directory, e.g. a `post-checkout` hook
that would then be executed _during_ a recursive clone.
When we implemented appropriate protections in 2b4c6efc821 (read-cache:
optionally disallow NTFS .git variants, 2014-12-16), we had analyzed
carefully that the `.git` directory or file would be guaranteed to be
the first directory entry to be written. Otherwise it would be possible
e.g. for a file named `..git` to be assigned the short name `git~1` and
subsequently, the short name generated for `.git` would be `git~2`. Or
`git~3`. Or even `~9999999` (for a detailed explanation of the lengths
we have to go to protect `.gitmodules`, see the commit message of e7cb0b4455c (is_ntfs_dotgit: match other .git files, 2018-05-11)).
However, by exploiting two issues (that will be addressed in a related
patch series close by), it is currently possible to clone a submodule
into a non-empty directory:
- On Windows, file names cannot end in a space or a period (for
historical reasons: the period separating the base name from the file
extension was not actually written to disk, and the base name/file
extension was space-padded to the full 8/3 characters, respectively).
Helpfully, when creating a directory under the name, say, `sub.`, that
trailing period is trimmed automatically and the actual name on disk
is `sub`.
This means that while Git thinks that the submodule names `sub` and
`sub.` are different, they both access `.git/modules/sub/`.
- While the backslash character is a valid file name character on Linux,
it is not so on Windows. As Git tries to be cross-platform, it
therefore allows backslash characters in the file names stored in tree
objects.
Which means that it is totally possible that a submodule `c` sits next
to a file `c\..git`, and on Windows, during recursive clone a file
called `..git` will be written into `c/`, of course _before_ the
submodule is cloned.
Note that the actual exploit is not quite as simple as having a
submodule `c` next to a file `c\..git`, as we have to make sure that the
directory `.git/modules/b` already exists when the submodule is checked
out, otherwise a different code path is taken in `module_clone()` that
does _not_ allow a non-empty submodule directory to exist already.
Even if we will address both issues nearby (the next commit will
disallow backslash characters in tree entries' file names on Windows,
and another patch will disallow creating directories/files with trailing
spaces or periods), it is a wise idea to defend in depth against this
sort of attack vector: when submodules are cloned recursively, we now
_require_ the directory to be empty, addressing CVE-2019-1349.
Note: the code path we patch is shared with the code path of `git
submodule update --init`, which must not expect, in general, that the
directory is empty. Hence we have to introduce the new option
`--force-init` and hand it all the way down from `git submodule` to the
actual `git submodule--helper` process that performs the initial clone.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Thu, 29 Aug 2019 19:08:42 +0000 (15:08 -0400)]
fast-import: disallow "feature import-marks" by default
As with export-marks in the previous commit, import-marks can access the
filesystem. This is significantly less dangerous than export-marks
because it only involves reading from arbitrary paths, rather than
writing them. However, it could still be surprising and have security
implications (e.g., exfiltrating data from a service that accepts
fast-import streams).
Let's lump it (and its "if-exists" counterpart) in with export-marks,
and enable the in-stream version only if --allow-unsafe-features is set.
Jeff King [Thu, 29 Aug 2019 18:37:26 +0000 (14:37 -0400)]
fast-import: disallow "feature export-marks" by default
The fast-import stream command "feature export-marks=<path>" lets the
stream write marks to an arbitrary path. This may be surprising if you
are running fast-import against an untrusted input (which otherwise
cannot do anything except update Git objects and refs).
Let's disallow the use of this feature by default, and provide a
command-line option to re-enable it (you can always just use the
command-line --export-marks as well, but the in-stream version provides
an easy way for exporters to control the process).
This is a backwards-incompatible change, since the default is flipping
to the new, safer behavior. However, since the main users of the
in-stream versions would be import/export-based remote helpers, and
since we trust remote helpers already (which are already running
arbitrary code), we'll pass the new option by default when reading a
remote helper's stream. This should minimize the impact.
Note that the implementation isn't totally simple, as we have to work
around the fact that fast-import doesn't parse its command-line options
until after it has read any "feature" lines from the stream. This is how
it lets command-line options override in-stream. But in our case, it's
important to parse the new --allow-unsafe-features first.
There are three options for resolving this:
1. Do a separate "early" pass over the options. This is easy for us to
do because there are no command-line options that allow the
"unstuck" form (so there's no chance of us mistaking an argument
for an option), though it does introduce a risk of incorrect
parsing later (e.g,. if we convert to parse-options).
2. Move the option parsing phase back to the start of the program, but
teach the stream-reading code never to override an existing value.
This is tricky, because stream "feature" lines override each other
(meaning we'd have to start tracking the source for every option).
3. Accept that we might parse a "feature export-marks" line that is
forbidden, as long we don't _act_ on it until after we've parsed
the command line options.
This would, in fact, work with the current code, but only because
the previous patch fixed the export-marks parser to avoid touching
the filesystem.
So while it works, it does carry risk of somebody getting it wrong
in the future in a rather subtle and unsafe way.
I've gone with option (1) here as simple, safe, and unlikely to cause
regressions.
Jeff King [Thu, 29 Aug 2019 17:33:48 +0000 (13:33 -0400)]
fast-import: delay creating leading directories for export-marks
When we parse the --export-marks option, we don't immediately open the
file, but we do create any leading directories. This can be especially
confusing when a command-line option overrides an in-stream one, in
which case we'd create the leading directory for the in-stream file,
even though we never actually write the file.
Let's instead create the directories just before opening the file, which
means we'll create only useful directories. Note that this could change
the handling of relative paths if we chdir() in between, but we don't
actually do so; the only permanent chdir is from setup_git_directory()
which runs before either code path (potentially we should take the
pre-setup dir into account to avoid surprising the user, but that's an
orthogonal change).
The test just adapts the existing "override" test to use paths with
leading directories. This checks both that the correct directory is
created (which worked before but was not tested), and that the
overridden one is not (our new fix here).
While we're here, let's also check the error result of
safe_create_leading_directories(). We'd presumably notice any failure
immediately after when we try to open the file itself, but we can give a
more specific error message in this case.
Jeff King [Thu, 29 Aug 2019 17:07:04 +0000 (13:07 -0400)]
fast-import: stop creating leading directories for import-marks
When asked to import marks from "subdir/file.marks", we create the
leading directory "subdir" if it doesn't exist. This makes no sense for
importing marks, where we only ever open the path for reading.
Most of the time this would be a noop, since if the marks file exists,
then the leading directories exist, too. But if it doesn't (e.g.,
because --import-marks-if-exists was used), then we'd create the useless
directory.
This dates back to 580d5f83e7 (fast-import: always create marks_file
directories, 2010-03-29). Even then it was useless, so it seems to have
been added in error alongside the --export-marks case (which _is_
helpful).
Jeff King [Thu, 29 Aug 2019 15:25:45 +0000 (11:25 -0400)]
fast-import: tighten parsing of boolean command line options
We parse options like "--max-pack-size=" using skip_prefix(), which
makes sense to get at the bytes after the "=". However, we also parse
"--quiet" and "--stats" with skip_prefix(), which allows things like
"--quiet-nonsense" to behave like "--quiet".
This was a mistaken conversion in 0f6927c229 (fast-import: put option
parsing code in separate functions, 2009-12-04). Let's tighten this to
an exact match, which was the original intent.
Jeff King [Thu, 29 Aug 2019 17:43:23 +0000 (13:43 -0400)]
t9300: create marks files for double-import-marks test
Our tests confirm that providing two "import-marks" options in a
fast-import stream is an error. However, the invoked command would fail
even without covering this case, because the marks files themselves do
not actually exist. Let's create the files to make sure we fail for the
right reason (we actually do, because the option parsing happens before
we open anything, but this future-proofs our test).
Derrick Stolee [Tue, 11 Dec 2018 20:35:46 +0000 (12:35 -0800)]
.gitattributes: ensure t/oid-info/* has eol=lf
The new test_oid machinery in the test library requires reading
some information from t/oid-info/hash-info and t/oid-info/oid.
The logic to read from these files in shell uses built-in "read"
command, which leaves CR at the end of these text files when they
are checked out with CRLF line endings, at least when run with bash
shipped with Git for Windows. This results in an unexpected value
in the variable these lines are read into, leading the tests to
fail.
Mark them to be checked out always with the LF line endings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The oneline notwithstanding, 13374987dd (completion: use _gitcompbuiltin
for format-patch, 2018-11-03) changed also the way send-email options
are completed, by asking the git send-email command itself what options
it offers.
Necessarily, this must fail when built with NO_PERL because send-email
itself is a Perl script. Which means that we need the PERL prerequisite
for the send-email test case in t9902.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test t4256-am-format-flowed.sh requires carefully applying a
patch after ignoring padding whitespace. This breaks if the file
is munged to include CRLF line endings instead of LF.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help -a: handle aliases with long names gracefully
We take pains to determine the longest command beforehand, so that we
can align the category column after printing the command names.
However, then we re-use that value when printing the aliases. If any
alias name is longer than the longest command name, we consequently try
to add a negative number of spaces (but `mput_char()` does not expect
any negative values and simply decrements until the value is 0, i.e.
it tries to add close to 2**31 spaces).
Let's fix this by adjusting the `longest` variable before printing the
aliases.
This fixes https://github.com/git-for-windows/git/issues/1975.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Dec 2018 05:46:07 +0000 (14:46 +0900)]
run-command: report exec failure
In 321fd823 ("run-command: mark path lookup errors with ENOENT",
2018-10-24), we rewrote the logic to execute a command by looking
in the directories on $PATH; as a side effect, a request to run a
command that is not found on $PATH is noticed even before a child
process is forked to execute it.
We however stopped to report an exec failure in such a case by
mistake. Add a logic to report the error unless silent-exec-failure
is requested, to match the original code.
Reported-by: John Passaro <john.a.passaro@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Mon, 3 Dec 2018 20:21:49 +0000 (21:21 +0100)]
RelNotes 2.20: move some items between sections
Some items that should be in "Performance, Internal Implementation,
Development Support etc." have ended up in "UI, Workflows & Features"
and "Fixes since v2.19". Move them, and do s/uses/use/ while at it.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Mon, 3 Dec 2018 21:21:31 +0000 (16:21 -0500)]
range-diff: always pass at least minimal diff options
Commit d8981c3f88 ("format-patch: do not let its diff-options affect
--range-diff", 2018-11-30) taught `show_range_diff()` to accept a
NULL-pointer as an indication that it should use its own "reasonable
default". That fixed a regression from a5170794 ("Merge branch
'ab/range-diff-no-patch'", 2018-11-18), but unfortunately it introduced
a regression of its own.
In particular, it means we forget the `file` member of the diff options,
so rather than placing a range-diff in the cover-letter, we write it to
stdout. In order to fix this, rewrite the two callers adjusted by d8981c3f88 to instead create a "dummy" set of diff options where they
only fill in the fields we absolutely require, such as output file and
color.
Modify and extend the existing tests to try and verify that the right
contents end up in the right place.
Don't revert `show_range_diff()`, i.e., let it keep accepting NULL.
Rather than removing what is dead code and figuring out it isn't
actually dead and we've broken 2.20, just leave it for now.
[es: retain diff coloring when going to stdout]
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 1 Dec 2018 12:41:44 +0000 (21:41 +0900)]
Merge branch 'sg/test-BUG'
test framework has been updated to make a bug in the test script
(as opposed to bugs in Git that are discovered by running the
tests) stand out more prominently.
* sg/test-BUG:
tests: send "bug in the test script" errors to the script's stderr
projects / thirdparty / git.git / log
