Junio C Hamano [Mon, 29 Jul 2019 19:38:19 +0000 (12:38 -0700)]
Merge branch 'sg/rebase-progress' into maint
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
Junio C Hamano [Mon, 29 Jul 2019 19:38:18 +0000 (12:38 -0700)]
Merge branch 'ms/submodule-foreach-fix' into maint
"git submodule foreach" did not protect command line options passed
to the command to be run in each submodule correctly, when the
"--recursive" option was in use.
* ms/submodule-foreach-fix:
submodule foreach: fix recursion of options
Junio C Hamano [Mon, 29 Jul 2019 19:38:18 +0000 (12:38 -0700)]
Merge branch 'js/rebase-reschedule-applies-only-to-interactive' into maint
The configuration variable rebase.rescheduleFailedExec should be
effective only while running an interactive rebase and should not
affect anything when running an non-interactive one, which was not
the case. This has been corrected.
* js/rebase-reschedule-applies-only-to-interactive:
rebase --am: ignore rebase.rescheduleFailedExec
Junio C Hamano [Mon, 29 Jul 2019 19:38:18 +0000 (12:38 -0700)]
Merge branch 'qn/clone-doc-use-long-form' into maint
The "git clone" documentation refers to command line options in its
description in the short form; they have been replaced with long
forms to make them more recognisable.
* qn/clone-doc-use-long-form:
docs: git-clone: list short form of options first
docs: git-clone: refer to long form of options
Junio C Hamano [Mon, 29 Jul 2019 19:38:17 +0000 (12:38 -0700)]
Merge branch 'jc/denoise-rm-to-resolve' into maint
"git rm" to resolve a conflicted path leaked an internal message
"needs merge" before actually removing the path, which was
confusing. This has been corrected.
* jc/denoise-rm-to-resolve:
rm: resolving by removal is not a warning-worthy event
Junio C Hamano [Mon, 29 Jul 2019 19:38:16 +0000 (12:38 -0700)]
Merge branch 'es/local-atomic-push-failure-with-http' into maint
"git push --atomic" that goes over the transport-helper (namely,
the smart http transport) failed to prevent refs to be pushed when
it can locally tell that one of the ref update will fail without
having to consult the other end, which has been corrected.
* es/local-atomic-push-failure-with-http:
transport-helper: avoid var decl in for () loop control
transport-helper: enforce atomic in push_refs_with_push
Junio C Hamano [Mon, 29 Jul 2019 19:38:11 +0000 (12:38 -0700)]
Merge branch 'js/gcc-8-and-9' into maint
Code clean-up for new compilers.
The 'kwset' one may get a wholesale replacement, either with new
version of kwset from upstream or removal of its users, but in the
meantime, it is probably OK to merge it down.
* js/gcc-8-and-9:
config: avoid calling `labs()` on too-large data type
winansi: simplify loading the GetCurrentConsoleFontEx() function
kwset: allow building with GCC 8
poll (mingw): allow compiling with GCC 8 and DEVELOPER=1
Junio C Hamano [Thu, 25 Jul 2019 21:27:13 +0000 (14:27 -0700)]
Merge branch 'an/ignore-doc-update' into maint
The description about slashes in gitignore patterns (used to
indicate things like "anchored to this level only" and "only
matches directories") has been revamped.
* an/ignore-doc-update:
gitignore.txt: make slash-rules more readable
Junio C Hamano [Thu, 25 Jul 2019 21:27:12 +0000 (14:27 -0700)]
Merge branch 'md/list-objects-filter-memfix' into maint
The filter_data used in the list-objects-filter (which manages a
lazily sparse clone repository) did not use the dynamic array API
correctly---'nr' is supposed to point at one past the last element
of the array in use. This has been corrected.
* md/list-objects-filter-memfix:
list-objects-filter: correct usage of ALLOC_GROW
Junio C Hamano [Thu, 25 Jul 2019 21:27:12 +0000 (14:27 -0700)]
Merge branch 'jt/partial-clone-missing-ref-delta-base' into maint
"git fetch" into a lazy clone forgot to fetch base objects that are
necessary to complete delta in a thin packfile, which has been
corrected.
* jt/partial-clone-missing-ref-delta-base:
t5616: cover case of client having delta base
t5616: use correct flag to check object is missing
index-pack: prefetch missing REF_DELTA bases
t5616: refactor packfile replacement
Junio C Hamano [Thu, 25 Jul 2019 21:27:12 +0000 (14:27 -0700)]
Merge branch 'xl/record-partial-clone-origin' into maint
When creating a partial clone, the object filtering criteria is
recorded for the origin of the clone, but this incorrectly used a
hardcoded name "origin" to name that remote; it has been corrected
to honor the "--origin <name>" option.
* xl/record-partial-clone-origin:
clone: respect user supplied origin name when setting up partial clone
Junio C Hamano [Thu, 25 Jul 2019 21:27:11 +0000 (14:27 -0700)]
Merge branch 'pb/request-pull-verify-remote-ref' into maint
"git request-pull" learned to warn when the ref we ask them to pull
from in the local repository and in the published repository are
different.
* pb/request-pull-verify-remote-ref:
request-pull: warn if the remote object is not the same as the local one
request-pull: quote regex metacharacters in local ref
Junio C Hamano [Thu, 25 Jul 2019 21:27:11 +0000 (14:27 -0700)]
Merge branch 'mm/p4-unshelve-windows-fix' into maint
The command line to invoke a "git cat-file" command from inside
"git p4" was not properly quoted to protect a caret and running a
broken command on Windows, which has been corrected.
* mm/p4-unshelve-windows-fix:
p4 unshelve: fix "Not a valid object name HEAD0" on Windows
Junio C Hamano [Thu, 25 Jul 2019 21:27:10 +0000 (14:27 -0700)]
Merge branch 'vv/merge-squash-with-explicit-commit' into maint
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
Junio C Hamano [Thu, 25 Jul 2019 21:27:09 +0000 (14:27 -0700)]
Merge branch 'js/bundle-verify-require-object-store' into maint
"git bundle verify" needs to see if prerequisite objects exist in
the receiving repository, but the command did not check if we are
in a repository upfront, which has been corrected.
* js/bundle-verify-require-object-store:
bundle verify: error out if called without an object database
Junio C Hamano [Thu, 25 Jul 2019 21:27:09 +0000 (14:27 -0700)]
Merge branch 'jk/am-i-resolved-fix' into maint
"git am -i --resolved" segfaulted after trying to see a commit as
if it were a tree, which has been corrected.
* jk/am-i-resolved-fix:
am: fix --interactive HEAD tree resolution
am: drop tty requirement for --interactive
am: read interactive input from stdin
am: simplify prompt response handling
Junio C Hamano [Thu, 25 Jul 2019 21:27:09 +0000 (14:27 -0700)]
Merge branch 'jk/HEAD-symref-in-xfer-namespaces' into maint
The server side support for "git fetch" used to show incorrect
value for the HEAD symbolic ref when the namespace feature is in
use, which has been corrected.
* jk/HEAD-symref-in-xfer-namespaces:
upload-pack: strip namespace from symref data
Junio C Hamano [Thu, 25 Jul 2019 21:27:07 +0000 (14:27 -0700)]
Merge branch 'mh/import-transport-fd-fix' into maint
The ownership rule for the file descriptor to fast-import remote
backend was mixed up, leading to unrelated file descriptor getting
closed, which has been fixed.
* mh/import-transport-fd-fix:
Use xmmap_gently instead of xmmap in use_pack
dup() the input fd for fast-import used for remote helpers
Junio C Hamano [Thu, 25 Jul 2019 21:27:06 +0000 (14:27 -0700)]
Merge branch 'nd/init-relative-template-fix' into maint
A relative pathname given to "git init --template=<path> <repo>"
ought to be relative to the directory "git init" gets invoked in,
but it instead was made relative to the repository, which has been
corrected.
* nd/init-relative-template-fix:
init: make --template path relative to $CWD
clean: show an error message when the path is too long
When `lstat()` failed, `git clean` would abort without an error
message, leaving the user quite puzzled.
In particular on Windows, where the default maximum path length is
quite small (yet there are ways to circumvent that limit in many
cases), it is very important that users be given an indication why
their command failed because of too long paths when it did.
This test case makes sure that a warning is issued that would have
helped the user who reported this issue:
https://github.com/git-for-windows/git/issues/521
Note that we temporarily set `core.longpaths = false` in the regression
test; this ensures forward-compatibility with the `core.longpaths`
feature that has not yet been upstreamed from Git for Windows.
Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Markdown incorrectly interpreted `<commandname>` as an HTML tag;
use backticks to escape `Documentation/git-<commandname>.txt` to ensure
that it renders the text as intended.
Signed-off-by: Doug Ilijev <doug.ilijev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 17 Jul 2019 20:28:24 +0000 (13:28 -0700)]
rm: resolving by removal is not a warning-worthy event
When resolving a conflict on a path in favor of removing it, using
"git rm" on it is the standard way to do so. The user however is
greeted with a "needs merge" message during that operation:
The removal by "git rm" does get performed, but an uninitiated user
may find it confusing, "needs merge? so I need to resolve conflict
before being able to remove it???"
The message is coming from "update-index --refresh" that is called
internally to make sure "git rm" knows which paths are clean and
which paths are dirty, in order to prevent removal of paths modified
relative to the index without the "-f" option. We somehow ended up
not squelching this message which seeped through to the UI surface.
Use the same mechanism used by "git commit", "git describe", etc. to
squelch the message.
mingw: support spawning programs containing spaces in their names
On some older Windows versions (e.g. Windows 7), the CreateProcessW()
function does not really support spaces in its first argument,
lpApplicationName. But it supports passing NULL as lpApplicationName,
which makes it figure out the application from the (possibly quoted)
first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
We will abuse the test-fake-ssh.exe helper to verify that this works and
does not regress.
This fixes https://github.com/git-for-windows/git/issues/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Steven Roberts [Tue, 16 Jul 2019 18:47:37 +0000 (11:47 -0700)]
gpg-interface: do not scan past the end of buffer
If the GPG output ends with trailing blank lines, after skipping
them over inside the loop to find the terminating NUL at the end,
the loop ends up looking for the next line, starting past the end.
Signed-off-by: Steven Roberts <sroberts@fenderq.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
do_read_index() mmaps the index, or tries to die with an error message
on failure. It should call xmmap_gently(), which returns MAP_FAILED,
rather than xmmap(), which dies with its own error message.
An easy way to cause this mmap to fail is by setting $GIT_INDEX_FILE to
a path to a directory and then invoking any command that reads from the
index.
Signed-off-by: Varun Naik <vcnaik94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Robert Morgan [Fri, 12 Jul 2019 15:33:57 +0000 (08:33 -0700)]
gpg(docs): use correct --verify syntax
The gpg --verify usage example within the 'gpg.program' variable
reference provides an incorrect example of the gpg --verify command
arguments.
The command argument order, when providing both a detached signature
and data, should be signature first and data second:
https://gnupg.org/documentation/manuals/gnupg/Operational-GPG-Commands.html
Signed-off-by: Robert Morgan <robert.thomas.morgan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport-helper: enforce atomic in push_refs_with_push
Teach transport-helper how to notice if skipping a ref during push would
violate atomicity on the client side. We notice that a ref would be
rejected, and choose not to send it, but don't notice that if the client
has asked for --atomic we are violating atomicity if all the other
pushes we are sending would succeed. Asking the server end to uphold
atomicity wouldn't work here as the server doesn't have any idea that we
tried to update a ref that's broken.
The added test-case is a succinct way to reproduce this issue that fails
today. The same steps work fine when we aren't using a transport-helper
to get to the upstream, i.e. when we've added a local repository as a
remote:
git remote add ~/upstream upstream
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: munmap() file contents before running external diff
When running an external diff from, say, a diff tool, it is safe to
assume that we want to write the files in question. On Windows, that
means that there cannot be any other process holding an open handle to
said files, or even just a mapped region.
So let's make sure that `git diff` itself is not holding any open handle
to the files in question.
In fact, we will just release the file pair right away, as the external
diff uses the files we just wrote, so we do not need to hold the file
contents in memory anymore.
This fixes https://github.com/git-for-windows/git/issues/1315
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct the api-trace2 documentation, which lists "signal" as an
expected field for the signal event type, but which actually outputs
"signo" as the field name.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 6 Jul 2019 16:21:14 +0000 (18:21 +0200)]
ci/lib.sh: update a comment about installed P4 and Git-LFS versions
A comment in 'ci/lib.sh' claims that the "OS X build installs the
latest available versions" of P4 and Git-LFS, but since f2f47150
("ci: don't update Homebrew", 2019-07-03) that's no longer the case,
as it will install the versions which were recorded in the image's
Homebrew database when the image was created.
Update this comment accordingly.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 3 Jul 2019 10:47:48 +0000 (12:47 +0200)]
ci: disable Homebrew's auto cleanup
Lately Homebrew learned to automagically clean up information about
outdated packages during other 'brew' commands, which might be useful
for the avarage user, but is a waste of time in CI build jobs, because
the next build jobs will start from the exact same image containing
the same outdated packages anyway.
Export HOMEBREW_NO_INSTALL_CLEANUP=1 to disable this auto cleanup feature,
shaving off about 20-30s from the time needed to install dependencies
in our macOS build jobs on Travis CI.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 3 Jul 2019 10:47:47 +0000 (12:47 +0200)]
ci: don't update Homebrew
Lately our GCC macOS build job on Travis CI has been erroring out
while installing dependencies with:
+brew link gcc@8
Error: No such keg: /usr/local/Cellar/gcc@8
The command "ci/install-dependencies.sh" failed and exited with 1 during .
Now, while gcc@8 is still pre-installed (but not linked) and would be
perfectly usable in the Travis CI macOS image we use [1], it's at
version 8.2. However, when installing dependencies we first
explicitly run 'brew update', which spends over two minutes to update
itself and information about the available packages, and it learns
about GCC 8.3. After that point gcc@8 exclusively refers to v8.3,
and, unfortunately, 'brew' is just too dumb to be able to do anything
with the still installed 8.2 package, and the subsequent 'brew link
gcc@8' fails. (Even 'brew uninstall gcc@8' fails with the same
error!)
Don't run 'brew update' to keep the already installed GCC 8.2 'brew
link'-able. Note that in addition we have to 'export
HOMEBREW_NO_AUTO_UPDATE=1' first, because 'brew' is so very helpful
that it would implicitly run update for us on the next 'brew install
<pkg>' otherwise.
Disabling 'brew update' has additional benefits:
- It shaves off 2-3mins from the ~4mins currently spent on
installing dependencies, and the macOS build jobs have always been
prone to exceeding the time limit on Travis CI.
- Our builds won't suddenly break because of the occasional Homebrew
breakages [2].
The drawback is that we'll be stuck with slightly older versions of
the packages that we install via Homebrew (Git-LFS 2.5.2 and Perforce
2018.1; they are currently at 2.7.2 and 2019.1, respectively). We
might want to reconsider this decision as time goes on and/or switch
to a more recent macOS image as they become available.
[1] 2000ac9fbf (travis-ci: switch to Xcode 10.1 macOS image,
2019-01-17)
[2] See e.g. a1ccaedd62 (travis-ci: make the OSX build jobs' 'brew
update' more quiet, 2019-02-02) or
List the short form of options (e.g.: '-l') before the long form (e.g.
'--local').
This is to match the doc of git-add, git-commit, git-clean, git-branch...
Signed-off-by: Quentin Nerden <quentin.nerden@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 24 Jun 2019 18:13:18 +0000 (20:13 +0200)]
progress: use term_clear_line()
To make sure that the previously displayed progress line is completely
covered up when the new line is shorter, commit 545dc345eb (progress:
break too long progress bar lines, 2019-04-12) added a bunch of
calculations to figure out how many characters it needs to overwrite
with spaces.
Use the just introduced term_clear_line() helper function to, well,
clear the last line, making all these calculations unnecessary, and
thus simplifying the code considerably.
Three tests in 't5541-http-push-smart.sh' 'grep' for specific text
shown in the progress lines at the beginning of the line, but now
those lines begin either with the ANSI escape sequence or with the
terminal width worth of space characters clearing the line. Relax the
'grep' patterns to match anywhere on the line. Note that only two of
these three tests fail without relaxing their 'grep' pattern, but the
third looks for the absence of the pattern, so it still succeeds, but
without the adjustment would potentially hide future regressions.
Note also that with this change we no longer need the length of the
previously displayed progress line, so the strbuf added to 'struct
progress' in d53ba841d4 (progress: assemble percentage and counters in
a strbuf before printing, 2019-04-05) is not strictly necessary
anymore. We still keep it, though, as it avoids allocating and
releasing a strbuf each time the progress is updated.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 27 Jun 2019 13:42:48 +0000 (15:42 +0200)]
rebase: fix garbled progress display with '-x'
When running a command with the 'exec' instruction during an
interactive rebase session, or for a range of commits using 'git
rebase -x', the output can be a bit garbled when the name of the
command is short enough:
Note the ')' at the end of the last line. It gets more garbled as the
range of commits increases:
$ git rebase -x true HEAD~50
Executing: true)
[ repeated 3 more times ]
Executing: true0)
[ repeated 44 more times ]
Executing: true00)
Successfully rebased and updated refs/heads/master.
Those extra numbers and ')' are remnants of the previously displayed
"Rebasing (N/M)" progress lines that are usually completely
overwritten by the "Executing: <cmd>" lines, unless 'cmd' is short and
the "N/M" part is long.
Make sure that the previously displayed "Rebasing (N/M)" line is
cleared by using the term_clear_line() helper function added in the
previous patch. Do so only when not being '--verbose', because in
that case these "Rebasing (N/M)" lines are not printed as progress
(i.e. as lines with '\r' at the end), but as "regular" output (with
'\n' at the end).
A couple of other rebase commands print similar messages, e.g.
"Stopped at <abbrev-oid>... <subject>" for the 'edit' or 'break'
commands, or the "Successfully rebased and updated <full-ref>." at the
very end. These are so long that they practically always overwrite
that "Rebasing (N/M)" progress line, but let's be prudent, and clear
the last line before printing these, too.
In 't3420-rebase-autostash.sh' two helper functions prepare the
expected output of four tests that check the full output of 'git
rebase' and thus are affected by this change, so adjust their
expectations to account for the new line clearing.
Note that this patch doesn't completely eliminate the possibility of
similar garbled outputs, e.g. some error messages from rebase or the
"Auto-merging <file>" message from within the depths of the merge
machinery might not be long enough to completely cover the last
"Rebasing (N/M)" line. This patch doesn't do anything about them,
because dealing with them individually would result in way too much
churn, while having a catch-all term_clear_line() call in the common
code path of pick_commits() would hide the "Rebasing (N/M)" line way
too soon, and it would either flicker or be invisible.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 5 Jun 2019 19:26:24 +0000 (12:26 -0700)]
t5551: test usage of chunked encoding explicitly
When run using GIT_TEST_PROTOCOL_VERSION=2, a test in t5551 fails
because 4 POSTs (probe, ls-refs, probe, fetch) are sent instead of 2
(probe, fetch).
One way to resolve this would be to relax the condition (from "= 2" to
greater than 1, say), but upon further inspection, the test probably
shouldn't be counting the number of POSTs. This test states that large
requests are split across POSTs, but this is not correct; the main
change is that chunked transfer encoding is used, but the request is
still contained within one POST. (The test coincidentally works because
Git indeed sends 2 POSTs in the case of a large request, but that is
because, as stated above, the first POST is a probing RPC - see
post_rpc() in remote-curl.c for more information.)
Therefore, instead of counting POSTs, check that chunked transfer
encoding is used. This also has the desirable side effect of passing
with GIT_TEST_PROTOCOL_VERSION=2.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 24 Jun 2019 12:44:46 +0000 (14:44 +0200)]
t5551: use 'test_i18ngrep' to check translated output
The two tests 'invalid Content-Type rejected' and 'server-side error
detected' in 't5551-http-fetch-smart.sh' use "plain" 'grep' to check
that 'git clone' failed with the expected error message, but the
messages they are checking are translated, and, consequently, these
tests fail when the test script is run with GIT_TEST_GETTEXT_POISON
enabled.
Use 'test_i18ngrep' instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
leads to an error stating that the option --<option> is unknown to
submodule--helper. That is of course only, when <option> is not a valid
option for git submodule foreach.
The reason for this is, that above call is internally translated into a
call to submodule--helper:
This call starts by executing the subcommand with its option inside the
first level submodule and continues by calling the next iteration of
the submodule foreach call
inside the first level submodule. Note that the double dash in front of
the subcommand is missing.
This problem starts to arise only recently, as the
PARSE_OPT_KEEP_UNKNOWN flag for the argument parsing of git submodule
foreach was removed in commit a282f5a906. Hence, the unknown option is
complained about now, as the argument parsing is not properly ended by
the double dash.
This commit fixes the problem by adding the double dash in front of the
subcommand during the recursion.
Signed-off-by: Morian Sonnet <moriansonnet@googlemail.com> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 24 Jun 2019 18:13:16 +0000 (20:13 +0200)]
pager: add a helper function to clear the last line in the terminal
There are a couple of places where we want to clear the last line on
the terminal, e.g. when a progress bar line is overwritten by a
shorter line, then the end of that progress line would remain visible,
unless we cover it up.
In 'progress.c' we did this by always appending a fixed number of
space characters to the next line (even if it was not shorter than the
previous), but as it turned out that fixed number was not quite large
enough, see the fix in 9f1fd84e15 (progress: clear previous progress
update dynamically, 2019-04-12). From then on we've been keeping
track of the length of the last displayed progress line and appending
the appropriate number of space characters to the next line, if
necessary, but, alas, this approach turned out to be error prone, see
the fix in 1aed1a5f25 (progress: avoid empty line when breaking the
progress line, 2019-05-19). The next patch in this series is about to
fix a case where we don't clear the last line, and on occasion do end
up with such garbage at the end of the line. It would be great if we
could do that without the need to deal with that without meticulously
computing the necessary number of space characters.
So add a helper function to clear the last line on the terminal using
an ANSI escape sequence, which has the advantage to clear the whole
line no matter how wide it is, even after the terminal width changed.
Such an escape sequence is not available on dumb terminals, though, so
in that case fall back to simply print a whole terminal width (as
reported by term_columns()) worth of space characters.
In 'editor.c' launch_specified_editor() already used this ANSI escape
sequence, so replace it with a call to this function.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 24 Jun 2019 18:13:15 +0000 (20:13 +0200)]
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
The test 'rebase -i respects rebase.missingCommitsCheck = warn' is
mainly interested in the warning about the dropped commits, but it
checks the whole output of 'git rebase', including progress lines and
what not that are not at all relevant to 'rebase.missingCommitsCheck',
but make it necessary to update this test whenever e.g. the way we
show progress is updated (as it will happen in one of the later
patches of this series).
Modify the test to verify only the first four lines of 'git rebase's
output that contain all the important lines, notably the line
containing the "Warning:" itself and the oneline log of the dropped
commit.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Mon, 24 Jun 2019 18:13:14 +0000 (20:13 +0200)]
t3404: modernize here doc style
In 't3404-rebase-interactive.sh' the expected output of several tests
is prepared from here documents, which are outside of
'test_expect_success' blocks and have spaces around redirection
operators.
Move these here documents into the corresponding 'test_expect_success'
block and avoid spaces between filename and redition operators.
Furthermore, quote the here docs' delimiter word to prevent parameter
expansions and what not, where applicable.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a case-insensitive filesystem, such as HFS+ or NTFS, it is possible
that the idea Bash has of the current directory differs in case from
what Git thinks it is. That's totally okay, though, and we should not
expect otherwise.
On Windows, for example, when you call
cd C:\GIT-SDK-64
in a PowerShell and there exists a directory called `C:\git-sdk-64`, the
current directory will be reported in all upper-case. Even in a Bash
that you might call from that PowerShell. Git, however, will have
normalized this via `GetFinalPathByHandle()`, and the expectation in
t0001 that the recorded gitdir will match what `pwd` says will be
violated.
Let's address this by comparing these paths in a case-insensitive
manner when `core.ignoreCase` is `true`.
Reported by Jameson Miller.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
0620b39b3b ("compat: add a mkstemps() compatibility function", 2009-05-31)
included a function based on code from libiberty which would result in
undefined behaviour in platforms where timeval's tv_usec is a 32-bit signed
type as shown by:
wrapper.c:505:31: runtime error: left shift of 594546 by 16 places cannot be represented in type '__darwin_suseconds_t' (aka 'int')
interestingly the version of this code from gcc never had this bug and the
code had a cast that would had prevented the issue (at least in 64-bit
platforms) but was misapplied.
change the cast to uint64_t so it also works in 32-bit platforms.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 15 Jun 2019 18:32:58 +0000 (20:32 +0200)]
coccinelle: use COPY_ARRAY for copying arrays
The current semantic patch for COPY_ARRAY transforms memcpy(3) calls on
pointers, but Coccinelle distinguishes them from arrays. It already
contains three rules to handle the options for sizeof (i.e. source,
destination and type), and handling arrays as source and destination
would require four times as many rules if we enumerated all cases.
We also don't handle array subscripts, and supporting that would
increase the number of rules by another factor of four. (An isomorphism
telling Coccinelle that "sizeof x[...]" is equivalent to "sizeof *x"
would be nice..)
Support arrays and array subscripts, but keep the number of rules down
by adding normalization steps: First turn array subscripts into
derefences, then determine the types of expressions used with sizeof and
replace them with these types, and then convert the different possible
combinations of arrays and pointers with memcpy(3) to COPY_ARRAY.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsmonitor: avoid signed integer overflow / infinite loop
883e248b8a ("fsmonitor: teach git to optionally utilize a file system
monitor to speed up detecting new or changed files.", 2017-09-22) uses
an int in a loop that would wrap if index_state->cache_nr (unsigned)
is bigger than INT_MAX
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: avoid calling `labs()` on too-large data type
The `labs()` function operates, as the initial `l` suggests, on `long`
parameters. However, in `config.c` we tried to use it on values of type
`intmax_t`.
This problem was found by GCC v9.x.
To fix it, let's just "unroll" the function (i.e. negate the value if it
is negative).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The kwset functionality makes use of the obstack code, which expects to
be handed a function that can allocate large chunks of data. It expects
that function to accept a `size` parameter of type `long`.
This upsets GCC 8 on Windows, because `long` does not have the same
bit size as `size_t` there.
Now, the proper thing to do would be to switch to `size_t`. But this
would make us deviate from the "upstream" code even further, making it
hard to synchronize with newer versions, and also it would be quite
involved because that `long` type is so invasive in that code.
Let's punt, and instead provide a super small wrapper around
`xmalloc()`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
poll (mingw): allow compiling with GCC 8 and DEVELOPER=1
The return type of the `GetProcAddress()` function is `FARPROC` which
evaluates to `long long int (*)()`, i.e. it cannot be cast to the
correct function signature by GCC 8.
To work around that, we first cast to `void *` and go on with our merry
lives.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 11 Jun 2019 21:06:47 +0000 (14:06 -0700)]
t5616: cover case of client having delta base
When fetching into a partial clone, Git first prefetches missing
REF_DELTA bases from the promisor remote. (This feature was introduced
in [1].) But as can be seen in a recent test coverage report [2], the
case in which a REF_DELTA base is already present is not covered by
tests.
Jonathan Tan [Tue, 11 Jun 2019 21:06:46 +0000 (14:06 -0700)]
t5616: use correct flag to check object is missing
If we want to check whether an object is missing, the correct flag to
pass to rev-list is --ignore-missing; --exclude-promisor-objects will
exclude any object that came from the promisor remote, whether it is
present or missing. Use the correct flag.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
