2 * WPA Supplicant / Network configuration structures
3 * Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi>
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
12 #include "common/defs.h"
13 #include "utils/list.h"
14 #include "eap_peer/eap_config.h"
17 #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
18 #define DEFAULT_EAPOL_FLAGS (EAPOL_FLAG_REQUIRE_KEY_UNICAST | \
19 EAPOL_FLAG_REQUIRE_KEY_BROADCAST)
20 #define DEFAULT_PROTO (WPA_PROTO_WPA | WPA_PROTO_RSN)
21 #define DEFAULT_KEY_MGMT (WPA_KEY_MGMT_PSK | WPA_KEY_MGMT_IEEE8021X)
22 #define DEFAULT_PAIRWISE (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
23 #define DEFAULT_GROUP (WPA_CIPHER_CCMP | WPA_CIPHER_TKIP)
24 #define DEFAULT_FRAGMENT_SIZE 1398
26 #define DEFAULT_BG_SCAN_PERIOD -1
27 #define DEFAULT_MESH_MAX_RETRIES 2
28 #define DEFAULT_MESH_RETRY_TIMEOUT 40
29 #define DEFAULT_MESH_CONFIRM_TIMEOUT 40
30 #define DEFAULT_MESH_HOLDING_TIMEOUT 40
31 #define DEFAULT_MESH_RSSI_THRESHOLD 1 /* no change */
32 #define DEFAULT_DISABLE_HT 0
33 #define DEFAULT_DISABLE_HT40 0
34 #define DEFAULT_DISABLE_SGI 0
35 #define DEFAULT_DISABLE_LDPC 0
36 #define DEFAULT_TX_STBC -1 /* no change */
37 #define DEFAULT_RX_STBC -1 /* no change */
38 #define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
39 #define DEFAULT_AMPDU_FACTOR -1 /* no change */
40 #define DEFAULT_AMPDU_DENSITY -1 /* no change */
41 #define DEFAULT_USER_SELECTED_SIM 1
42 #define DEFAULT_MAX_OPER_CHWIDTH -1
44 struct psk_list_entry
{
56 WPAS_MODE_P2P_GROUP_FORMATION
= 4,
61 * struct wpa_ssid - Network configuration data
63 * This structure includes all the configuration variables for a network. This
64 * data is included in the per-interface configuration data as an element of
65 * the network list, struct wpa_config::ssid. Each network block in the
66 * configuration is mapped to a struct wpa_ssid instance.
70 * next - Next network in global list
72 * This pointer can be used to iterate over all networks. The head of
73 * this list is stored in the ssid field of struct wpa_config.
75 struct wpa_ssid
*next
;
78 * pnext - Next network in per-priority list
80 * This pointer can be used to iterate over all networks in the same
81 * priority class. The heads of these list are stored in the pssid
82 * fields of struct wpa_config.
84 struct wpa_ssid
*pnext
;
87 * id - Unique id for the network
89 * This identifier is used as a unique identifier for each network
90 * block when using the control interface. Each network is allocated an
91 * id when it is being created, either when reading the configuration
92 * file or when a new network is added through the control interface.
97 * priority - Priority group
99 * By default, all networks will get same priority group (0). If some
100 * of the networks are more desirable, this field can be used to change
101 * the order in which wpa_supplicant goes through the networks when
102 * selecting a BSS. The priority groups will be iterated in decreasing
103 * priority (i.e., the larger the priority value, the sooner the
104 * network is matched against the scan results). Within each priority
105 * group, networks will be selected based on security policy, signal
108 * Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are
109 * not using this priority to select the order for scanning. Instead,
110 * they try the networks in the order that used in the configuration
116 * ssid - Service set identifier (network name)
118 * This is the SSID for the network. For wireless interfaces, this is
119 * used to select which network will be used. If set to %NULL (or
120 * ssid_len=0), any SSID can be used. For wired interfaces, this must
121 * be set to %NULL. Note: SSID may contain any characters, even nul
122 * (ASCII 0) and as such, this should not be assumed to be a nul
123 * terminated string. ssid_len defines how many characters are valid
124 * and the ssid field is not guaranteed to be nul terminated.
129 * ssid_len - Length of the SSID
136 * If set, this network block is used only when associating with the AP
137 * using the configured BSSID
139 * If this is a persistent P2P group (disabled == 2), this is the GO
145 * bssid_blacklist - List of inacceptable BSSIDs
148 size_t num_bssid_blacklist
;
151 * bssid_blacklist - List of acceptable BSSIDs
154 size_t num_bssid_whitelist
;
157 * bssid_set - Whether BSSID is configured for this network
162 * bssid_hint - BSSID hint
164 * If set, this is configured to the driver as a preferred initial BSSID
165 * while connecting to this network.
167 u8 bssid_hint
[ETH_ALEN
];
170 * bssid_hint_set - Whether BSSID hint is configured for this network
175 * go_p2p_dev_addr - GO's P2P Device Address or all zeros if not set
177 u8 go_p2p_dev_addr
[ETH_ALEN
];
180 * psk - WPA pre-shared key (256 bits)
185 * psk_set - Whether PSK field is configured
190 * passphrase - WPA ASCII passphrase
192 * If this is set, psk will be generated using the SSID and passphrase
193 * configured for the network. ASCII passphrase must be between 8 and
194 * 63 characters (inclusive).
199 * sae_password - SAE password
201 * This parameter can be used to set a password for SAE. By default, the
202 * passphrase value is used if this separate parameter is not used, but
203 * passphrase follows the WPA-PSK constraints (8..63 characters) even
204 * though SAE passwords do not have such constraints.
209 * sae_password_id - SAE password identifier
211 * This parameter can be used to identify a specific SAE password. If
212 * not included, the default SAE password is used instead.
214 char *sae_password_id
;
219 * ext_psk - PSK/passphrase name in external storage
221 * If this is set, PSK/passphrase will be fetched from external storage
222 * when requesting association with the network.
227 * mem_only_psk - Whether to keep PSK/passphrase only in memory
229 * 0 = allow psk/passphrase to be stored to the configuration file
230 * 1 = do not store psk/passphrase to the configuration file
235 * pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
240 * group_cipher - Bitfield of allowed group ciphers, WPA_CIPHER_*
245 * group_mgmt_cipher - Bitfield of allowed group management ciphers
247 * This is a bitfield of WPA_CIPHER_AES_128_CMAC and WPA_CIPHER_BIP_*
248 * values. If 0, no constraint is used for the cipher, i.e., whatever
249 * the AP uses is accepted.
251 int group_mgmt_cipher
;
254 * key_mgmt - Bitfield of allowed key management protocols
261 * bg_scan_period - Background scan period in seconds, 0 to disable, or
262 * -1 to indicate no change to default driver configuration
267 * proto - Bitfield of allowed protocols, WPA_PROTO_*
272 * auth_alg - Bitfield of allowed authentication algorithms
279 * scan_ssid - Scan this SSID with Probe Requests
281 * scan_ssid can be used to scan for APs using hidden SSIDs.
282 * Note: Many drivers do not support this. ap_mode=2 can be used with
283 * such drivers to use hidden SSIDs. Note2: Most nl80211-based drivers
284 * do support scan_ssid=1 and that should be used with them instead of
289 #ifdef IEEE8021X_EAPOL
290 #define EAPOL_FLAG_REQUIRE_KEY_UNICAST BIT(0)
291 #define EAPOL_FLAG_REQUIRE_KEY_BROADCAST BIT(1)
293 * eapol_flags - Bit field of IEEE 802.1X/EAPOL options (EAPOL_FLAG_*)
298 * eap - EAP peer configuration for this network
300 struct eap_peer_config eap
;
301 #endif /* IEEE8021X_EAPOL */
303 #define NUM_WEP_KEYS 4
304 #define MAX_WEP_KEY_LEN 16
308 u8 wep_key
[NUM_WEP_KEYS
][MAX_WEP_KEY_LEN
];
311 * wep_key_len - WEP key lengths
313 size_t wep_key_len
[NUM_WEP_KEYS
];
316 * wep_tx_keyidx - Default key index for TX frames using WEP
321 * proactive_key_caching - Enable proactive key caching
323 * This field can be used to enable proactive key caching which is also
324 * known as opportunistic PMKSA caching for WPA2. This is disabled (0)
325 * by default unless default value is changed with the global okc=1
326 * parameter. Enable by setting this to 1.
328 * Proactive key caching is used to make supplicant assume that the APs
329 * are using the same PMK and generate PMKSA cache entries without
330 * doing RSN pre-authentication. This requires support from the AP side
331 * and is normally used with wireless switches that co-locate the
334 * Internally, special value -1 is used to indicate that the parameter
335 * was not specified in the configuration (i.e., default behavior is
338 int proactive_key_caching
;
341 * mixed_cell - Whether mixed cells are allowed
343 * This option can be used to configure whether so called mixed cells,
344 * i.e., networks that use both plaintext and encryption in the same
345 * SSID, are allowed. This is disabled (0) by default. Enable by
350 #ifdef IEEE8021X_EAPOL
353 * leap - Number of EAP methods using LEAP
355 * This field should be set to 1 if LEAP is enabled. This is used to
356 * select IEEE 802.11 authentication algorithm.
361 * non_leap - Number of EAP methods not using LEAP
363 * This field should be set to >0 if any EAP method other than LEAP is
364 * enabled. This is used to select IEEE 802.11 authentication
370 * eap_workaround - EAP workarounds enabled
372 * wpa_supplicant supports number of "EAP workarounds" to work around
373 * interoperability issues with incorrectly behaving authentication
374 * servers. This is recommended to be enabled by default because some
375 * of the issues are present in large number of authentication servers.
377 * Strict EAP conformance mode can be configured by disabling
378 * workarounds with eap_workaround = 0.
380 unsigned int eap_workaround
;
382 #endif /* IEEE8021X_EAPOL */
385 * mode - IEEE 802.11 operation mode (Infrastucture/IBSS)
387 * 0 = infrastructure (Managed) mode, i.e., associate with an AP.
389 * 1 = IBSS (ad-hoc, peer-to-peer)
391 * 2 = AP (access point)
393 * 3 = P2P Group Owner (can be set in the configuration file)
395 * 4 = P2P Group Formation (used internally; not in configuration
400 * Note: IBSS can only be used with key_mgmt NONE (plaintext and static
401 * WEP) and WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE
402 * (fixed group key TKIP/CCMP) is available for backwards compatibility,
403 * but its use is deprecated. WPA-None requires following network block
404 * options: proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or
405 * CCMP, but not both), and psk must also be set (either directly or
406 * using ASCII passphrase).
411 * pbss - Whether to use PBSS. Relevant to DMG networks only.
412 * 0 = do not use PBSS
414 * 2 = don't care (not allowed in AP mode)
415 * Used together with mode configuration. When mode is AP, it
416 * means to start a PCP instead of a regular AP. When mode is INFRA it
417 * means connect to a PCP instead of AP. In this mode you can also
418 * specify 2 (don't care) meaning connect to either AP or PCP.
419 * P2P_GO and P2P_GROUP_FORMATION modes must use PBSS in DMG network.
424 * disabled - Whether this network is currently disabled
426 * 0 = this network can be used (default).
427 * 1 = this network block is disabled (can be enabled through
428 * ctrl_iface, e.g., with wpa_cli or wpa_gui).
429 * 2 = this network block includes parameters for a persistent P2P
430 * group (can be used with P2P ctrl_iface commands)
435 * disabled_for_connect - Whether this network was temporarily disabled
437 * This flag is used to reenable all the temporarily disabled networks
438 * after either the success or failure of a WPS connection.
440 int disabled_for_connect
;
443 * id_str - Network identifier string for external scripts
445 * This value is passed to external ctrl_iface monitors in
446 * WPA_EVENT_CONNECTED event and wpa_cli sets this as WPA_ID_STR
447 * environment variable for action scripts.
452 * ieee80211w - Whether management frame protection is enabled
454 * This value is used to configure policy for management frame
455 * protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required.
456 * This is disabled by default unless the default value has been changed
457 * with the global pmf=1/2 parameter.
459 * Internally, special value 3 is used to indicate that the parameter
460 * was not specified in the configuration (i.e., default behavior is
463 enum mfp_options ieee80211w
;
467 * ocv - Enable/disable operating channel validation
469 * If this parameter is set to 1, stations will exchange OCI element
470 * to cryptographically verify the operating channel. Setting this
471 * parameter to 0 disables this option. Default value: 0.
474 #endif /* CONFIG_OCV */
477 * frequency - Channel frequency in megahertz (MHz) for IBSS
479 * This value is used to configure the initial channel for IBSS (adhoc)
480 * networks, e.g., 2412 = IEEE 802.11b/g channel 1. It is ignored in
481 * the infrastructure mode. In addition, this value is only used by the
482 * station that creates the IBSS. If an IBSS network with the
483 * configured SSID is already present, the frequency of the network
484 * will be used instead of this configured value.
489 * enable_edmg - Enable EDMG feature in STA/AP mode
491 * This flag is used for enabling the EDMG capability in STA/AP mode.
496 * edmg_channel - EDMG channel number
498 * This value is used to configure the EDMG channel bonding feature.
499 * In AP mode it defines the EDMG channel to start the AP on.
500 * in STA mode it defines the EDMG channel to use for connection
501 * (if supported by AP).
506 * fixed_freq - Use fixed frequency for IBSS
512 * ACS - Automatic Channel Selection for AP mode
514 * If present, it will be handled together with frequency.
515 * frequency will be used to determine hardware mode only, when it is
516 * used for both hardware mode and channel when used alone. This will
517 * force the channel to be set to 0, thus enabling ACS.
520 #endif /* CONFIG_ACS */
523 * mesh_basic_rates - BSS Basic rate set for mesh network
526 int *mesh_basic_rates
;
529 * Mesh network plink parameters
531 int dot11MeshMaxRetries
;
532 int dot11MeshRetryTimeout
; /* msec */
533 int dot11MeshConfirmTimeout
; /* msec */
534 int dot11MeshHoldingTimeout
; /* msec */
543 int max_oper_chwidth
;
545 unsigned int vht_center_freq1
;
546 unsigned int vht_center_freq2
;
549 * wpa_ptk_rekey - Maximum lifetime for PTK in seconds
551 * This value can be used to enforce rekeying of PTK to mitigate some
552 * attacks against TKIP deficiencies.
557 * group_rekey - Group rekeying time in seconds
559 * This value, if non-zero, is used as the dot11RSNAConfigGroupRekeyTime
560 * parameter when operating in Authenticator role in IBSS.
565 * scan_freq - Array of frequencies to scan or %NULL for all
567 * This is an optional zero-terminated array of frequencies in
568 * megahertz (MHz) to include in scan requests when searching for this
569 * network. This can be used to speed up scanning when the network is
570 * known to not use all possible channels.
575 * bgscan - Background scan and roaming parameters or %NULL if none
577 * This is an optional set of parameters for background scanning and
578 * roaming within a network (ESS) in following format:
579 * <bgscan module name>:<module parameters>
584 * ignore_broadcast_ssid - Hide SSID in AP mode
586 * Send empty SSID in beacons and ignore probe request frames that do
587 * not specify full SSID, i.e., require stations to know SSID.
588 * default: disabled (0)
589 * 1 = send empty (length=0) SSID in beacon and ignore probe request
591 * 2 = clear SSID (ASCII 0), but keep the original length (this may be
592 * required with some clients that do not support empty SSID) and
593 * ignore probe requests for broadcast SSID
595 int ignore_broadcast_ssid
;
598 * freq_list - Array of allowed frequencies or %NULL for all
600 * This is an optional zero-terminated array of frequencies in
601 * megahertz (MHz) to allow for selecting the BSS. If set, scan results
602 * that do not match any of the specified frequencies are not
603 * considered when selecting a BSS.
608 * p2p_client_list - List of P2P Clients in a persistent group (GO)
610 * This is a list of P2P Clients (P2P Device Address) that have joined
611 * the persistent group. This is maintained on the GO for persistent
612 * group entries (disabled == 2).
617 * num_p2p_clients - Number of entries in p2p_client_list
619 size_t num_p2p_clients
;
621 #ifndef P2P_MAX_STORED_CLIENTS
622 #define P2P_MAX_STORED_CLIENTS 100
623 #endif /* P2P_MAX_STORED_CLIENTS */
626 * psk_list - Per-client PSKs (struct psk_list_entry)
628 struct dl_list psk_list
;
631 * p2p_group - Network generated as a P2P group (used internally)
636 * p2p_persistent_group - Whether this is a persistent group
638 int p2p_persistent_group
;
641 * temporary - Whether this network is temporary and not to be saved
646 * export_keys - Whether keys may be exported
648 * This attribute will be set when keys are determined through
649 * WPS or similar so that they may be exported.
653 #ifdef CONFIG_HT_OVERRIDES
655 * disable_ht - Disable HT (IEEE 802.11n) for this network
657 * By default, use it if it is available, but this can be configured
658 * to 1 to have it disabled.
663 * disable_ht40 - Disable HT40 for this network
665 * By default, use it if it is available, but this can be configured
666 * to 1 to have it disabled.
671 * disable_sgi - Disable SGI (Short Guard Interval) for this network
673 * By default, use it if it is available, but this can be configured
674 * to 1 to have it disabled.
679 * disable_ldpc - Disable LDPC for this network
681 * By default, use it if it is available, but this can be configured
682 * to 1 to have it disabled.
687 * ht40_intolerant - Indicate 40 MHz intolerant for this network
692 * disable_max_amsdu - Disable MAX A-MSDU
694 * A-MDSU will be 3839 bytes when disabled, or 7935
695 * when enabled (assuming it is otherwise supported)
696 * -1 (default) means do not apply any settings to the kernel.
698 int disable_max_amsdu
;
701 * ampdu_factor - Maximum A-MPDU Length Exponent
703 * Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009.
708 * ampdu_density - Minimum A-MPDU Start Spacing
710 * Value: 0-7, see 7.3.2.56.3 in IEEE Std 802.11n-2009.
715 * ht_mcs - Allowed HT-MCS rates, in ASCII hex: ffff0000...
717 * By default (empty string): Use whatever the OS has configured.
722 * tx_stbc - Indicate STBC support for TX streams
724 * Value: -1..1, by default (-1): use whatever the OS or card has
725 * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
730 * rx_stbc - Indicate STBC support for RX streams
732 * Value: -1..3, by default (-1): use whatever the OS or card has
733 * configured. See IEEE Std 802.11-2016, 9.4.2.56.2.
736 #endif /* CONFIG_HT_OVERRIDES */
738 #ifdef CONFIG_VHT_OVERRIDES
740 * disable_vht - Disable VHT (IEEE 802.11ac) for this network
742 * By default, use it if it is available, but this can be configured
743 * to 1 to have it disabled.
748 * vht_capa - VHT capabilities to use
750 unsigned int vht_capa
;
753 * vht_capa_mask - mask for VHT capabilities
755 unsigned int vht_capa_mask
;
757 int vht_rx_mcs_nss_1
, vht_rx_mcs_nss_2
,
758 vht_rx_mcs_nss_3
, vht_rx_mcs_nss_4
,
759 vht_rx_mcs_nss_5
, vht_rx_mcs_nss_6
,
760 vht_rx_mcs_nss_7
, vht_rx_mcs_nss_8
;
761 int vht_tx_mcs_nss_1
, vht_tx_mcs_nss_2
,
762 vht_tx_mcs_nss_3
, vht_tx_mcs_nss_4
,
763 vht_tx_mcs_nss_5
, vht_tx_mcs_nss_6
,
764 vht_tx_mcs_nss_7
, vht_tx_mcs_nss_8
;
765 #endif /* CONFIG_VHT_OVERRIDES */
768 * ap_max_inactivity - Timeout in seconds to detect STA's inactivity
770 * This timeout value is used in AP mode to clean up inactive stations.
771 * By default: 300 seconds.
773 int ap_max_inactivity
;
776 * dtim_period - DTIM period in Beacon intervals
782 * beacon_int - Beacon interval (default: 100 TU)
787 * auth_failures - Number of consecutive authentication failures
789 unsigned int auth_failures
;
792 * disabled_until - Network block disabled until this time if non-zero
794 struct os_reltime disabled_until
;
797 * parent_cred - Pointer to parent wpa_cred entry
799 * This pointer can be used to delete temporary networks when a wpa_cred
800 * that was used to create them is removed. This pointer should not be
801 * dereferences since it may not be updated in all cases.
807 * macsec_policy - Determines the policy for MACsec secure session
809 * 0: MACsec not in use (default)
810 * 1: MACsec enabled - Should secure, accept key server's advice to
811 * determine whether to use a secure session or not.
816 * macsec_integ_only - Determines how MACsec are transmitted
818 * This setting applies only when MACsec is in use, i.e.,
819 * - macsec_policy is enabled
820 * - the key server has decided to enable MACsec
822 * 0: Encrypt traffic (default)
825 int macsec_integ_only
;
828 * macsec_replay_protect - Enable MACsec replay protection
830 * This setting applies only when MACsec is in use, i.e.,
831 * - macsec_policy is enabled
832 * - the key server has decided to enable MACsec
834 * 0: Replay protection disabled (default)
835 * 1: Replay protection enabled
837 int macsec_replay_protect
;
840 * macsec_replay_window - MACsec replay protection window
842 * A window in which replay is tolerated, to allow receipt of frames
843 * that have been misordered by the network.
845 * This setting applies only when MACsec replay protection active, i.e.,
846 * - macsec_replay_protect is enabled
847 * - the key server has decided to enable MACsec
849 * 0: No replay window, strict check (default)
850 * 1..2^32-1: number of packets that could be misordered
852 u32 macsec_replay_window
;
855 * macsec_port - MACsec port (in SCI)
857 * Port component of the SCI.
859 * Range: 1-65534 (default: 1)
864 * mka_priority - Priority of MKA Actor
866 * Range: 0-255 (default: 255)
871 * mka_ckn - MKA pre-shared CKN
873 #define MACSEC_CKN_MAX_LEN 32
875 u8 mka_ckn
[MACSEC_CKN_MAX_LEN
];
878 * mka_cak - MKA pre-shared CAK
880 #define MACSEC_CAK_MAX_LEN 32
882 u8 mka_cak
[MACSEC_CAK_MAX_LEN
];
884 #define MKA_PSK_SET_CKN BIT(0)
885 #define MKA_PSK_SET_CAK BIT(1)
886 #define MKA_PSK_SET (MKA_PSK_SET_CKN | MKA_PSK_SET_CAK)
888 * mka_psk_set - Whether mka_ckn and mka_cak are set
891 #endif /* CONFIG_MACSEC */
894 int update_identifier
;
897 * roaming_consortium_selection - Roaming Consortium Selection
899 * The matching Roaming Consortium OI that was used to generate this
902 u8
*roaming_consortium_selection
;
905 * roaming_consortium_selection_len - roaming_consortium_selection len
907 size_t roaming_consortium_selection_len
;
908 #endif /* CONFIG_HS20 */
910 unsigned int wps_run
;
913 * mac_addr - MAC address policy
915 * 0 = use permanent MAC address
916 * 1 = use random MAC address for each ESS connection
917 * 2 = like 1, but maintain OUI (with local admin bit set)
919 * Internally, special value -1 is used to indicate that the parameter
920 * was not specified in the configuration (i.e., default behavior is
926 * no_auto_peer - Do not automatically peer with compatible mesh peers
928 * When unset, the reception of a beacon from a another mesh peer in
929 * this MBSS will trigger a peering attempt.
934 * mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm)
936 * -255..-1 = threshold value in dBm
937 * 0 = not using RSSI threshold
938 * 1 = do not change driver default
940 int mesh_rssi_threshold
;
943 * wps_disabled - WPS disabled in AP mode
945 * 0 = WPS enabled and configured (default)
951 * fils_dh_group - FILS DH Group
953 * 0 = PFS disabled with FILS shared key authentication
954 * 1-65535 DH Group to use for FILS PFS
959 * dpp_connector - DPP Connector (signedConnector as string)
964 * dpp_netaccesskey - DPP netAccessKey (own private key)
966 u8
*dpp_netaccesskey
;
969 * dpp_netaccesskey_len - DPP netAccessKey length in octets
971 size_t dpp_netaccesskey_len
;
974 * net_access_key_expiry - DPP netAccessKey expiry in UNIX time stamp
976 * 0 indicates no expiration.
978 unsigned int dpp_netaccesskey_expiry
;
981 * dpp_csign - C-sign-key (Configurator public key)
986 * dpp_csign_len - C-sign-key length in octets
988 size_t dpp_csign_len
;
991 * owe_group - OWE DH Group
993 * 0 = use default (19) first and then try all supported groups one by
994 * one if AP rejects the selected group
995 * 1-65535 DH Group to use for OWE
997 * Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are
998 * currently supported.
1003 * owe_only - OWE-only mode (disable transition mode)
1005 * 0 = enable transition mode (allow connection to either OWE or open
1007 * 1 = disable transition mode (allow connection only with OWE)
1012 * owe_ptk_workaround - OWE PTK derivation workaround
1014 * Initial OWE implementation used SHA256 when deriving the PTK for all
1015 * OWE groups. This was supposed to change to SHA384 for group 20 and
1016 * SHA512 for group 21. This parameter can be used to enable older
1017 * behavior mainly for testing purposes. There is no impact to group 19
1018 * behavior, but if enabled, this will make group 20 and 21 cases use
1019 * SHA256-based PTK derivation which will not work with the updated
1020 * OWE implementation on the AP side.
1022 int owe_ptk_workaround
;
1025 * owe_transition_bss_select_count - OWE transition BSS select count
1027 * This is an internally used variable (i.e., not used in external
1028 * configuration) to track the number of selection attempts done for
1029 * OWE BSS in transition mode. This allows fallback to an open BSS if
1030 * the selection attempts for OWE BSS exceed the configured threshold.
1032 int owe_transition_bss_select_count
;
1035 * multi_ap_backhaul_sta - Multi-AP backhaul STA
1036 * 0 = normal (non-Multi-AP) station
1037 * 1 = Multi-AP backhaul station
1039 int multi_ap_backhaul_sta
;
1042 * ft_eap_pmksa_caching - Whether FT-EAP PMKSA caching is allowed
1043 * 0 = do not try to use PMKSA caching with FT-EAP
1044 * 1 = try to use PMKSA caching with FT-EAP
1046 * This controls whether to try to use PMKSA caching with FT-EAP for the
1047 * FT initial mobility domain association.
1049 int ft_eap_pmksa_caching
;
1052 * beacon_prot - Whether Beacon protection is enabled
1054 * This depends on management frame protection (ieee80211w) being
1060 #endif /* CONFIG_SSID_H */