dev[0].dump_monitor()
dev[1].dump_monitor()
-def test_wpas_mesh_open_5ghz_coex(dev, apdev):
- """Mesh network on 5 GHz band and 20/40 coex change"""
- try:
- _test_wpas_mesh_open_5ghz_coex(dev, apdev)
- finally:
- dev[0].request("MESH_GROUP_REMOVE " + dev[0].ifname)
- dev[1].request("MESH_GROUP_REMOVE " + dev[1].ifname)
- set_world_reg(apdev0=apdev[0], dev0=dev[0])
- dev[0].flush_scan_cache()
- dev[1].flush_scan_cache()
-
-def _test_wpas_mesh_open_5ghz_coex(dev, apdev):
- check_mesh_support(dev[0])
- subprocess.call(['iw', 'reg', 'set', 'US'])
-
- # Start a 20 MHz BSS on channel 40 that would be the secondary channel of
- # HT40+ mesh on channel 36.
- params = {"ssid": "test-ht40",
- "hw_mode": "a",
- "channel": "40",
- "country_code": "US"}
- hapd = hostapd.add_ap(apdev[0], params)
- bssid = hapd.own_addr()
-
- for i in range(2):
- for j in range(5):
- ev = dev[i].wait_event(["CTRL-EVENT-REGDOM-CHANGE"], timeout=5)
- if ev is None:
- raise Exception("No regdom change event")
- if "alpha2=US" in ev:
- break
- dev[i].scan_for_bss(bssid, freq=5200)
- add_open_mesh_network(dev[i], freq="5180")
-
- check_mesh_joined_connected(dev)
-
- freq = dev[0].get_status_field("freq")
- if freq != "5200":
- raise Exception("Unexpected STATUS freq=" + freq)
- sig = dev[0].request("SIGNAL_POLL").splitlines()
- if "FREQUENCY=5200" not in sig:
- raise Exception("Unexpected SIGNAL_POLL output: " + str(sig))
-
- hapd.disable()
- dev[0].mesh_group_remove()
- dev[1].mesh_group_remove()
- check_mesh_group_removed(dev[0])
- check_mesh_group_removed(dev[1])
- dev[0].dump_monitor()
- dev[1].dump_monitor()
def test_wpas_mesh_open_ht40(dev, apdev):
"""Mesh and HT40 support difference"""