} else if (os_strcmp(buf, "eapol_version") == 0) {
int eapol_version = atoi(pos);
+#ifdef CONFIG_MACSEC
+ if (eapol_version < 1 || eapol_version > 3) {
+#else /* CONFIG_MACSEC */
if (eapol_version < 1 || eapol_version > 2) {
+#endif /* CONFIG_MACSEC */
wpa_printf(MSG_ERROR,
"Line %d: invalid EAPOL version (%d): '%s'.",
line, eapol_version, pos);
return 1;
}
#endif /* CONFIG_AIRTIME_POLICY */
+#ifdef CONFIG_MACSEC
+ } else if (os_strcmp(buf, "macsec_policy") == 0) {
+ int macsec_policy = atoi(pos);
+
+ if (macsec_policy < 0 || macsec_policy > 1) {
+ wpa_printf(MSG_ERROR,
+ "Line %d: invalid macsec_policy (%d): '%s'.",
+ line, macsec_policy, pos);
+ return 1;
+ }
+ bss->macsec_policy = macsec_policy;
+ } else if (os_strcmp(buf, "macsec_integ_only") == 0) {
+ int macsec_integ_only = atoi(pos);
+
+ if (macsec_integ_only < 0 || macsec_integ_only > 1) {
+ wpa_printf(MSG_ERROR,
+ "Line %d: invalid macsec_integ_only (%d): '%s'.",
+ line, macsec_integ_only, pos);
+ return 1;
+ }
+ bss->macsec_integ_only = macsec_integ_only;
+ } else if (os_strcmp(buf, "macsec_replay_protect") == 0) {
+ int macsec_replay_protect = atoi(pos);
+
+ if (macsec_replay_protect < 0 || macsec_replay_protect > 1) {
+ wpa_printf(MSG_ERROR,
+ "Line %d: invalid macsec_replay_protect (%d): '%s'.",
+ line, macsec_replay_protect, pos);
+ return 1;
+ }
+ bss->macsec_replay_protect = macsec_replay_protect;
+ } else if (os_strcmp(buf, "macsec_replay_window") == 0) {
+ bss->macsec_replay_window = atoi(pos);
+ } else if (os_strcmp(buf, "macsec_port") == 0) {
+ int macsec_port = atoi(pos);
+
+ if (macsec_port < 1 || macsec_port > 65534) {
+ wpa_printf(MSG_ERROR,
+ "Line %d: invalid macsec_port (%d): '%s'.",
+ line, macsec_port, pos);
+ return 1;
+ }
+ bss->macsec_port = macsec_port;
+ } else if (os_strcmp(buf, "mka_priority") == 0) {
+ int mka_priority = atoi(pos);
+
+ if (mka_priority < 0 || mka_priority > 255) {
+ wpa_printf(MSG_ERROR,
+ "Line %d: invalid mka_priority (%d): '%s'.",
+ line, mka_priority, pos);
+ return 1;
+ }
+ bss->mka_priority = mka_priority;
+ } else if (os_strcmp(buf, "mka_cak") == 0) {
+ size_t len = os_strlen(pos);
+
+ if (len > 2 * MACSEC_CAK_MAX_LEN ||
+ (len != 2 * 16 && len != 2 * 32) ||
+ hexstr2bin(pos, bss->mka_cak, len / 2)) {
+ wpa_printf(MSG_ERROR, "Line %d: Invalid MKA-CAK '%s'.",
+ line, pos);
+ return 1;
+ }
+ bss->mka_cak_len = len / 2;
+ bss->mka_psk_set |= MKA_PSK_SET_CAK;
+ } else if (os_strcmp(buf, "mka_ckn") == 0) {
+ size_t len = os_strlen(pos);
+
+ if (len > 2 * MACSEC_CKN_MAX_LEN || /* too long */
+ len < 2 || /* too short */
+ len % 2 != 0 /* not an integral number of bytes */) {
+ wpa_printf(MSG_ERROR, "Line %d: Invalid MKA-CKN '%s'.",
+ line, pos);
+ return 1;
+ }
+ bss->mka_ckn_len = len / 2;
+ if (hexstr2bin(pos, bss->mka_ckn, bss->mka_ckn_len)) {
+ wpa_printf(MSG_ERROR, "Line %d: Invalid MKA-CKN '%s'.",
+ line, pos);
+ return -1;
+ }
+ bss->mka_psk_set |= MKA_PSK_SET_CKN;
+#endif /* CONFIG_MACSEC */
} else {
wpa_printf(MSG_ERROR,
"Line %d: unknown configuration item '%s'",
# the new version number correctly (they seem to drop the frames completely).
# In order to make hostapd interoperate with these clients, the version number
# can be set to the older version (1) with this configuration value.
+# Note: When using MACsec, eapol_version shall be set to 3, which is
+# defined in IEEE Std 802.1X-2010.
#eapol_version=2
# Optional displayable message sent with EAP Request-Identity. The first \0
# ERP is enabled (eap_server_erp=1).
#erp_domain=example.com
+##### MACsec ##################################################################
+
+# macsec_policy: IEEE 802.1X/MACsec options
+# This determines how sessions are secured with MACsec (only for MACsec
+# drivers).
+# 0: MACsec not in use (default)
+# 1: MACsec enabled - Should secure, accept key server's advice to
+# determine whether to use a secure session or not.
+#
+# macsec_integ_only: IEEE 802.1X/MACsec transmit mode
+# This setting applies only when MACsec is in use, i.e.,
+# - macsec_policy is enabled
+# - the key server has decided to enable MACsec
+# 0: Encrypt traffic (default)
+# 1: Integrity only
+#
+# macsec_replay_protect: IEEE 802.1X/MACsec replay protection
+# This setting applies only when MACsec is in use, i.e.,
+# - macsec_policy is enabled
+# - the key server has decided to enable MACsec
+# 0: Replay protection disabled (default)
+# 1: Replay protection enabled
+#
+# macsec_replay_window: IEEE 802.1X/MACsec replay protection window
+# This determines a window in which replay is tolerated, to allow receipt
+# of frames that have been misordered by the network.
+# This setting applies only when MACsec replay protection active, i.e.,
+# - macsec_replay_protect is enabled
+# - the key server has decided to enable MACsec
+# 0: No replay window, strict check (default)
+# 1..2^32-1: number of packets that could be misordered
+#
+# macsec_port: IEEE 802.1X/MACsec port
+# Port component of the SCI
+# Range: 1-65534 (default: 1)
+#
+# mka_priority (Priority of MKA Actor)
+# Range: 0..255 (default: 255)
+#
+# mka_cak, mka_ckn, and mka_priority: IEEE 802.1X/MACsec pre-shared key mode
+# This allows to configure MACsec with a pre-shared key using a (CAK,CKN) pair.
+# In this mode, instances of hostapd can act as MACsec peers. The peer
+# with lower priority will become the key server and start distributing SAKs.
+# mka_cak (CAK = Secure Connectivity Association Key) takes a 16-byte (128-bit)
+# hex-string (32 hex-digits) or a 32-byte (256-bit) hex-string (64 hex-digits)
+# mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string
+# (2..64 hex-digits)
+
##### Integrated EAP server ###################################################
# Optionally, hostapd can be configured to use an integrated EAP server
#include "crypto/tls.h"
#include "radius/radius_client.h"
#include "common/ieee802_11_defs.h"
+#include "common/ieee802_1x_defs.h"
#include "common/eapol_common.h"
#include "common/dhcp.h"
#include "eap_common/eap_wsc_common.h"
bss->hs20_release = (HS20_VERSION >> 4) + 1;
#endif /* CONFIG_HS20 */
+#ifdef CONFIG_MACSEC
+ bss->mka_priority = DEFAULT_PRIO_NOT_KEY_SERVER;
+ bss->macsec_port = 1;
+#endif /* CONFIG_MACSEC */
+
/* Default to strict CRL checking. */
bss->check_crl_strict = 1;
}
int osen;
int proxy_arp;
int na_mcast_to_ucast;
+
#ifdef CONFIG_HS20
int hs20;
int hs20_release;
int airtime_limit;
struct airtime_sta_weight *airtime_weight_list;
#endif /* CONFIG_AIRTIME_POLICY */
+
+#ifdef CONFIG_MACSEC
+ /**
+ * macsec_policy - Determines the policy for MACsec secure session
+ *
+ * 0: MACsec not in use (default)
+ * 1: MACsec enabled - Should secure, accept key server's advice to
+ * determine whether to use a secure session or not.
+ */
+ int macsec_policy;
+
+ /**
+ * macsec_integ_only - Determines how MACsec are transmitted
+ *
+ * This setting applies only when MACsec is in use, i.e.,
+ * - macsec_policy is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: Encrypt traffic (default)
+ * 1: Integrity only
+ */
+ int macsec_integ_only;
+
+ /**
+ * macsec_replay_protect - Enable MACsec replay protection
+ *
+ * This setting applies only when MACsec is in use, i.e.,
+ * - macsec_policy is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: Replay protection disabled (default)
+ * 1: Replay protection enabled
+ */
+ int macsec_replay_protect;
+
+ /**
+ * macsec_replay_window - MACsec replay protection window
+ *
+ * A window in which replay is tolerated, to allow receipt of frames
+ * that have been misordered by the network.
+ *
+ * This setting applies only when MACsec replay protection active, i.e.,
+ * - macsec_replay_protect is enabled
+ * - the key server has decided to enable MACsec
+ *
+ * 0: No replay window, strict check (default)
+ * 1..2^32-1: number of packets that could be misordered
+ */
+ u32 macsec_replay_window;
+
+ /**
+ * macsec_port - MACsec port (in SCI)
+ *
+ * Port component of the SCI.
+ *
+ * Range: 1-65534 (default: 1)
+ */
+ int macsec_port;
+
+ /**
+ * mka_priority - Priority of MKA Actor
+ *
+ * Range: 0-255 (default: 255)
+ */
+ int mka_priority;
+
+ /**
+ * mka_ckn - MKA pre-shared CKN
+ */
+#define MACSEC_CKN_MAX_LEN 32
+ size_t mka_ckn_len;
+ u8 mka_ckn[MACSEC_CKN_MAX_LEN];
+
+ /**
+ * mka_cak - MKA pre-shared CAK
+ */
+#define MACSEC_CAK_MAX_LEN 32
+ size_t mka_cak_len;
+ u8 mka_cak[MACSEC_CAK_MAX_LEN];
+
+#define MKA_PSK_SET_CKN BIT(0)
+#define MKA_PSK_SET_CAK BIT(1)
+#define MKA_PSK_SET (MKA_PSK_SET_CKN | MKA_PSK_SET_CAK)
+ /**
+ * mka_psk_set - Whether mka_ckn and mka_cak are set
+ */
+ u8 mka_psk_set;
+#endif /* CONFIG_MACSEC */
};
/**
projects / thirdparty / hostap.git / commitdiff
