Update ChangeLog files to match current implementation

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>

diff --git a/hostapd/ChangeLog b/hostapd/ChangeLog
index 1a4e566b4a771c82de81ba168e4edcc634e69c67..5ef96768f81cb0ca4a994c6ecfd08291123e3949 100644 (file)
--- a/hostapd/ChangeLog
+++ b/hostapd/ChangeLog
@@ -1,8 +1,40 @@
 ChangeLog for hostapd
 
-????-??-?? - v2.1
-       * added support for simulataneous authentication of equals (SAE) for
+2014-02-04 - v2.1
+       * added support for simultaneous authentication of equals (SAE) for
          stronger password-based authentication with WPA2-Personal
+       * added nl80211 functionality
+         - VHT configuration for nl80211
+         - support split wiphy dump
+         - driver-based MAC ACL
+         - QoS Mapping configuration
+       * added fully automated regression testing with mac80211_hwsim
+       * allow ctrl_iface group to be specified on command line (-G<group>)
+       * allow single hostapd process to control independent WPS interfaces
+         (wps_independent=1) instead of synchronized operations through all
+         configured interfaces within a process
+       * avoid processing received management frames multiple times when using
+         nl80211 with multiple BSSes
+       * added support for DFS (processing radar detection events, CAC, channel
+         re-selection)
+       * added EAP-EKE server
+       * added automatic channel selection (ACS)
+       * added option for using per-BSS (vif) configuration files with
+         -b<phyname>:<config file name>
+       * extended global control interface ADD/REMOVE commands to allow BSSes
+         of a radio to be removed individually without having to add/remove all
+         other BSSes of the radio at the same time
+       * added support for sending debug info to Linux tracing (-T on command
+         line)
+       * replace dump_file functionality with same information being available
+         through the hostapd control interface
+       * added support for using Protected Dual of Public Action frames for
+         GAS/ANQP exchanges when PMF is enabled
+       * added support for WPS+NFC updates
+         - improved protocol
+         - option to fetch and report alternative carrier records for external
+           NFC operations
+       * various bug fixes
 
 2013-01-12 - v2.0
        * added AP-STA-DISCONNECTED ctrl_iface event

diff --git a/wpa_supplicant/ChangeLog b/wpa_supplicant/ChangeLog
index 3f10e1135c302f3438f401651a65297f0d365f97..e40cf91f133fed71904f419ca7b2599614d411d4 100644 (file)
--- a/wpa_supplicant/ChangeLog
+++ b/wpa_supplicant/ChangeLog
@@ -1,8 +1,113 @@
 ChangeLog for wpa_supplicant
 
-????-??-?? - v2.1
-       * added support for simulataneous authentication of equals (SAE) for
+2014-02-04 - v2.1
+       * added support for simultaneous authentication of equals (SAE) for
          stronger password-based authentication with WPA2-Personal
+       * improved P2P negotiation and group formation robustness
+         - avoid unnecessary Dialog Token value changes during retries
+         - avoid more concurrent scanning cases during full group formation
+           sequence
+         - do not use potentially obsolete scan result data from driver
+           cache for peer discovery/updates
+         - avoid undesired re-starting of GO negotiation based on Probe
+           Request frames
+         - increase GO Negotiation and Invitation timeouts to address busy
+           environments and peers that take long time to react to messages,
+           e.g., due to power saving
+         - P2P Device interface type
+       * improved P2P channel selection (use more peer information and allow
+         more local options)
+       * added support for optional per-device PSK assignment by P2P GO
+         (wpa_cli p2p_set per_sta_psk <0/1>)
+       * added P2P_REMOVE_CLIENT for removing a client from P2P groups
+         (including persistent groups); this can be used to securely remove
+         a client from a group if per-device PSKs are used
+       * added more configuration flexibility for allowed P2P GO/client
+         channels (p2p_no_go_freq list and p2p_add_cli_chan=0/1)
+       * added nl80211 functionality
+         - VHT configuration for nl80211
+         - MFP (IEEE 802.11w) information for nl80211 command API
+         - support split wiphy dump
+         - FT (IEEE 802.11r) with driver-based SME
+         - use advertised number of supported concurrent channels
+         - QoS Mapping configuration
+       * improved TDLS negotiation robustness
+       * added more TDLS peer parameters to be configured to the driver
+       * optimized connection time by allowing recently received scan results
+         to be used instead of having to run through a new scan
+       * fixed ctrl_iface BSS command iteration with RANGE argument and no
+         exact matches; also fixed argument parsing for some cases with
+         multiple arguments
+       * added 'SCAN TYPE=ONLY' ctrl_iface command to request manual scan
+         without executing roaming/network re-selection on scan results
+       * added Session-Id derivation for EAP peer methods
+       * added fully automated regression testing with mac80211_hwsim
+       * changed configuration parser to reject invalid integer values
+       * allow AP/Enrollee to be specified with BSSID instead of UUID for
+         WPS ER operations
+       * disable network block temporarily on repeated connection failures
+       * changed the default driver interface from wext to nl80211 if both are
+         included in the build
+       * remove duplicate networks if WPS provisioning is run multiple times
+       * remove duplicate networks when Interworking network selection uses the
+         same network
+       * added global freq_list configuration to allow scan frequencies to be
+         limited for all cases instead of just for a specific network block
+       * added support for BSS Transition Management
+       * added option to use "IFNAME=<ifname> " prefix to use the global
+         control interface connection to perform per-interface commands;
+         similarly, allow global control interface to be used as a monitor
+         interface to receive events from all interfaces
+       * fixed OKC-based PMKSA cache entry clearing
+       * fixed TKIP group key configuration with FT
+       * added support for using OCSP stapling to validate server certificate
+         (ocsp=1 as optional and ocsp=2 as mandatory)
+       * added EAP-EKE peer
+       * added peer restart detection for IBSS RSN
+       * added domain_suffix_match (and domain_suffix_match2 for Phase 2
+         EAP-TLS) to specify additional constraint for the server certificate
+         domain name
+       * added support for external SIM/USIM processing in EAP-SIM, EAP-AKA,
+         and EAP-AKA' (CTRL-REQ-SIM and CTRL-RSP-SIM commands over control
+         interface)
+       * added global bgscan configuration option as a default for all network
+         blocks that do not specify their own bgscan parameters
+       * added D-Bus methods for TDLS
+       * added more control to scan requests
+         - "SCAN freq=<freq list>" can be used to specify which channels are
+           scanned (comma-separated frequency ranges in MHz)
+         - "SCAN passive=1" can be used to request a passive scan (no Probe
+           Request frames are sent)
+         - "SCAN use_id" can be used to request a scan id to be returned and
+           included in event messages related to this specific scan operation
+         - "SCAN only_new=1" can be used to request the driver/cfg80211 to
+           report only BSS entries that have been updated during this scan
+           round
+         - these optional arguments to the SCAN command can be combined with
+           each other
+       * modified behavior on externally triggered scans
+         - avoid concurrent operations requiring full control of the radio when
+           an externally triggered scan is detected
+         - do not use results for internal roaming decision
+       * added a new cred block parameter 'temporary' to allow credential
+         blocks to be stored separately even if wpa_supplicant configuration
+         file is used to maintain other network information
+       * added "radio work" framework to schedule exclusive radio operations
+         for off-channel functionality
+         - reduce issues with concurrent operations that try to control which
+           channel is used
+         - allow external programs to request exclusive radio control in a way
+           that avoids conflicts with wpa_supplicant
+       * added support for using Protected Dual of Public Action frames for
+         GAS/ANQP exchanges when associated with PMF
+       * added support for WPS+NFC updates and P2P+NFC
+         - improved protocol for WPS
+         - P2P group formation/join based on NFC connection handover
+         - new IPv4 address assignment for P2P groups (ip_addr_* configuration
+           parameters on the GO) to replace DHCP
+         - option to fetch and report alternative carrier records for external
+           NFC operations
+       * various bug fixes
 
 2013-01-12 - v2.0
        * removed Qt3-based wpa_gui (obsoleted by wpa_qui-qt4)