update nl80211.h to 3.15 version

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

diff --git a/nl80211.h b/nl80211.h
index 474ce32e07974e19f96adfa18adc42e81dae073c..194c1eab04d8ad9cb37ae855d8c011d48722c829 100644 (file)
--- a/nl80211.h
+++ b/nl80211.h
@@ -303,8 +303,9 @@
  *     passed, all channels allowed for the current regulatory domain
  *     are used.  Extra IEs can also be passed from the userspace by
  *     using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
- *     if scheduled scan is not running.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ *     scheduled scan is not running. The caller may assume that as soon
+ *     as the call returns, it is safe to start a new scheduled scan again.
  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
  *     results available.
  * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
@@ -1575,6 +1576,9 @@ enum nl80211_commands {
  *     advertise values that cannot always be met. In such cases, an attempt
  *     to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
  *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ *     As specified in the &enum nl80211_tdls_peer_capability.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1908,6 +1912,8 @@ enum nl80211_attrs {
 
        NL80211_ATTR_MAX_AP_ASSOC_STA,
 
+       NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -2329,6 +2335,7 @@ enum nl80211_band_attr {
  * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
  *     using this channel as the primary or any of the secondary channels
  *     isn't possible
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *     currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -2347,6 +2354,7 @@ enum nl80211_frequency_attr {
        NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
        NL80211_FREQUENCY_ATTR_NO_80MHZ,
        NL80211_FREQUENCY_ATTR_NO_160MHZ,
+       NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
 
        /* keep last */
        __NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2437,12 +2445,14 @@ enum nl80211_reg_type {
  *     in KHz. This is not a center a frequency but an actual regulatory
  *     band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- *     frequency range, in KHz.
+ *     frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
  *     for a given frequency range. The value is in mBi (100 * dBi).
  *     If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
  *     a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ *     If not present or 0 default CAC time will be used.
  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
  *     currently defined
  * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
@@ -2458,6 +2468,8 @@ enum nl80211_reg_rule_attr {
        NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
        NL80211_ATTR_POWER_RULE_MAX_EIRP,
 
+       NL80211_ATTR_DFS_CAC_TIME,
+
        /* keep last */
        __NL80211_REG_RULE_ATTR_AFTER_LAST,
        NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
@@ -2508,6 +2520,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
  *     this includes probe requests or modes of operation that require
  *     beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ *     base on contiguous rules and wider channels will be allowed to cross
+ *     multiple contiguous/overlapping frequency ranges.
  */
 enum nl80211_reg_rule_flags {
        NL80211_RRF_NO_OFDM             = 1<<0,
@@ -2519,6 +2534,7 @@ enum nl80211_reg_rule_flags {
        NL80211_RRF_PTMP_ONLY           = 1<<6,
        NL80211_RRF_NO_IR               = 1<<7,
        __NL80211_RRF_NO_IBSS           = 1<<8,
+       NL80211_RRF_AUTO_BW             = 1<<11,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN       NL80211_RRF_NO_IR
@@ -3840,11 +3856,8 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *     to work properly to suppport receiving regulatory hints from
  *     cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- *     P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- *     in the interface combinations, even when it's only used for scan
- *     and remain-on-channel. This could be due to, for example, the
- *     remain-on-channel implementation requiring a channel context.
+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
+ *     here to reserve the value for API/ABI compatibility)
  * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
  *     equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
  *     mode
@@ -4076,4 +4089,20 @@ struct nl80211_vendor_cmd_info {
        __u32 subcmd;
 };
 
+/**
+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
+ * Used by tdls_mgmt() to determine which conditional elements need
+ * to be added to TDLS Setup frames.
+ *
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
+enum nl80211_tdls_peer_capability {
+       NL80211_TDLS_PEER_HT = 1<<0,
+       NL80211_TDLS_PEER_VHT = 1<<1,
+       NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
 #endif /* __LINUX_NL80211_H */