* FILS shared key authentication offload should be able to construct the
* authentication and association frames for FILS shared key authentication and
* eventually do a key derivation as per IEEE 802.11ai. The below additional
- * parameters should be given to driver in %NL80211_CMD_CONNECT.
+ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in
+ * %NL80211_CMD_UPDATE_CONNECT_PARAMS.
* %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
* %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
* %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
* as specified in IETF RFC 6696.
*
* When FILS shared key authentication is completed, driver needs to provide the
- * below additional parameters to userspace.
+ * below additional parameters to userspace, which can be either after setting
+ * up a connection or after roaming.
* %NL80211_ATTR_FILS_KEK - used for key renewal
* %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
* %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
* only the %NL80211_ATTR_IE data is used and updated with this command.
*
* @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
- * for the given authenticator address (specified with &NL80211_ATTR_MAC).
- * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
+ * for the given authenticator address (specified with %NL80211_ATTR_MAC).
+ * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
* PMK-R0, otherwise it specifies the PMK.
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
* configured PMK for the authenticator address identified by
- * &NL80211_ATTR_MAC.
+ * %NL80211_ATTR_MAC.
* @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
* handshake was completed successfully by the driver. The BSSID is
- * specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
* offload should send this event after indicating 802.11 association with
- * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
- * &NL80211_CMD_DISCONNECT should be indicated instead.
+ * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
+ * %NL80211_CMD_DISCONNECT should be indicated instead.
*
* @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
* and RX notification. This command is used both as a request to transmit
* initiated the connection through the connect request.
*
* @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
- * ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE,
- * &NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its
- * address(specified in &NL80211_ATTR_MAC).
+ * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
+ * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
+ * address(specified in %NL80211_ATTR_MAC).
*
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
* @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
* authentication operation (u32 attribute with an
* &enum nl80211_external_auth_action value). This is used with the
- * &NL80211_CMD_EXTERNAL_AUTH request event.
+ * %NL80211_CMD_EXTERNAL_AUTH request event.
* @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
* space supports external authentication. This attribute shall be used
* only with %NL80211_CMD_CONNECT request. The driver may offload
* enforced.
* @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
* a flow is assigned on each round of the DRR scheduler.
+ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION). Can be set
+ * only if %NL80211_STA_FLAG_WME is set.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
NL80211_ATTR_TXQ_MEMORY_LIMIT,
NL80211_ATTR_TXQ_QUANTUM,
+ NL80211_ATTR_HE_CAPABILITY,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
+#define NL80211_WIPHY_NAME_MAXLEN 64
+
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_HT_RATES 77
#define NL80211_MAX_SUPP_REG_RULES 64
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
#define NL80211_VHT_CAPABILITY_LEN 12
-
+#define NL80211_HE_MIN_CAPABILITY_LEN 16
+#define NL80211_HE_MAX_CAPABILITY_LEN 51
#define NL80211_MAX_NR_CIPHER_SUITES 5
#define NL80211_MAX_NR_AKM_SUITES 2
__u32 set;
} __attribute__((packed));
+/**
+ * enum nl80211_he_gi - HE guard interval
+ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
+ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
+ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
+ */
+enum nl80211_he_gi {
+ NL80211_RATE_INFO_HE_GI_0_8,
+ NL80211_RATE_INFO_HE_GI_1_6,
+ NL80211_RATE_INFO_HE_GI_3_2,
+};
+
+/**
+ * enum nl80211_he_ru_alloc - HE RU allocation values
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
+ */
+enum nl80211_he_ru_alloc {
+ NL80211_RATE_INFO_HE_RU_ALLOC_26,
+ NL80211_RATE_INFO_HE_RU_ALLOC_52,
+ NL80211_RATE_INFO_HE_RU_ALLOC_106,
+ NL80211_RATE_INFO_HE_RU_ALLOC_242,
+ NL80211_RATE_INFO_HE_RU_ALLOC_484,
+ NL80211_RATE_INFO_HE_RU_ALLOC_996,
+ NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
+};
+
/**
* enum nl80211_rate_info - bitrate information
*
* @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
* a legacy rate and will be reported as the actual bitrate, i.e.
* a quarter of the base (20 MHz) rate
+ * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
+ * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
+ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
+ * (u8, see &enum nl80211_he_gi)
+ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
+ * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
* @__NL80211_RATE_INFO_AFTER_LAST: internal use
*/
enum nl80211_rate_info {
NL80211_RATE_INFO_160_MHZ_WIDTH,
NL80211_RATE_INFO_10_MHZ_WIDTH,
NL80211_RATE_INFO_5_MHZ_WIDTH,
+ NL80211_RATE_INFO_HE_MCS,
+ NL80211_RATE_INFO_HE_NSS,
+ NL80211_RATE_INFO_HE_GI,
+ NL80211_RATE_INFO_HE_DCM,
+ NL80211_RATE_INFO_HE_RU_ALLOC,
/* keep last */
__NL80211_RATE_INFO_AFTER_LAST,
* received from the station (u64, usec)
* @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
* @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
- * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data)
- * ACK frame (s8, dBm)
+ * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
NL80211_STA_INFO_RX_DURATION,
NL80211_STA_INFO_PAD,
NL80211_STA_INFO_ACK_SIGNAL,
- NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG,
+ NL80211_STA_INFO_ACK_SIGNAL_AVG,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
};
+/* we renamed this - stay compatible */
+#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG
+
+
/**
* enum nl80211_tid_stats - per TID statistics attributes
* @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
};
+/**
+ * enum nl80211_band_iftype_attr - Interface type data attributes
+ *
+ * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
+ * for each interface type that supports the band data
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
+ * capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
+ * capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
+ * capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
+ * defined in HE capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
+ * defined
+ * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_iftype_attr {
+ __NL80211_BAND_IFTYPE_ATTR_INVALID,
+
+ NL80211_BAND_IFTYPE_ATTR_IFTYPES,
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
+ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
+
+ /* keep last */
+ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
+ NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
+};
+
/**
* enum nl80211_band_attr - band attributes
* @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
* defined in 802.11ac
* @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
+ * attributes from &enum nl80211_band_iftype_attr
* @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
* @__NL80211_BAND_ATTR_AFTER_LAST: internal use
*/
NL80211_BAND_ATTR_VHT_MCS_SET,
NL80211_BAND_ATTR_VHT_CAPA,
+ NL80211_BAND_ATTR_IFTYPE_DATA,
/* keep last */
__NL80211_BAND_ATTR_AFTER_LAST,
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+ * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
* @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
* enum nl80211_band - Frequency band
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
* @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
* since newer kernel versions may support more bands
*/
* "radar detected" event.
* @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
* receiving control port frames over nl80211 instead of the netdevice.
- * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack
- * rssi if firmware support, this flag is to intimate about ack rssi
- * support to nl80211.
+ * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
+ * (average) ACK signal strength reporting.
* @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
* TXQs.
+ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
+ * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
+ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
+ * except for supported rates from the probe request content if requested
+ * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
NL80211_EXT_FEATURE_DFS_OFFLOAD,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
- NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT,
+ NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
+ /* we renamed this - stay compatible */
+ NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
NL80211_EXT_FEATURE_TXQS,
+ NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
+ NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
* possible scan results. This flag hints the driver to use the best
* possible scan configuration to improve the accuracy in scanning.
* Latency and power use may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
+ * request frames from this scan to avoid correlation/tracking being
+ * possible.
+ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
+ * only have supported rates and no additional capabilities (unless
+ * added by userspace explicitly.)
*/
enum nl80211_scan_flags {
NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
NL80211_SCAN_FLAG_LOW_SPAN = 1<<8,
NL80211_SCAN_FLAG_LOW_POWER = 1<<9,
NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
+ NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
+ NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
};
/**
* @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
* This is a flag.
* @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
- * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
+ * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
* @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
- * &NL80211_NAN_SRF_BF is present. This is a u8.
+ * %NL80211_NAN_SRF_BF is present. This is a u8.
* @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
- * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
+ * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
* attribute. Each nested attribute is a MAC address.
* @NUM_NL80211_NAN_SRF_ATTR: internal
* @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
projects / thirdparty / iw.git / commitdiff
