]> git.ipfire.org Git - thirdparty/kernel/linux.git/blob - arch/powerpc/platforms/ps3/Kconfig
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
[thirdparty/kernel/linux.git] / arch / powerpc / platforms / ps3 / Kconfig
1 # SPDX-License-Identifier: GPL-2.0
2 config PPC_PS3
3 bool "Sony PS3"
4 depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
5 select PPC_CELL
6 select USB_OHCI_LITTLE_ENDIAN
7 select USB_OHCI_BIG_ENDIAN_MMIO
8 select USB_EHCI_BIG_ENDIAN_MMIO
9 select PPC_PCI_CHOICE
10 help
11 This option enables support for the Sony PS3 game console
12 and other platforms using the PS3 hypervisor. Enabling this
13 option will allow building otheros.bld, a kernel image suitable
14 for programming into flash memory, and vmlinux, a kernel image
15 suitable for loading via kexec.
16
17 menu "PS3 Platform Options"
18 depends on PPC_PS3
19
20 config PS3_ADVANCED
21 depends on PPC_PS3
22 bool "PS3 Advanced configuration options"
23 help
24 This gives you access to some advanced options for the PS3. The
25 defaults should be fine for most users, but these options may make
26 it possible to better control the kernel configuration if you know
27 what you are doing.
28
29 Note that the answer to this question won't directly affect the
30 kernel: saying N will just cause the configurator to skip all
31 the questions about these options.
32
33 Most users should say N to this question.
34
35 config PS3_HTAB_SIZE
36 depends on PPC_PS3
37 int "PS3 Platform pagetable size" if PS3_ADVANCED
38 range 18 20
39 default 20
40 help
41 This option is only for experts who may have the desire to fine
42 tune the pagetable size on their system. The value here is
43 expressed as the log2 of the page table size. Valid values are
44 18, 19, and 20, corresponding to 256KB, 512KB and 1MB respectively.
45
46 If unsure, choose the default (20) with the confidence that your
47 system will have optimal runtime performance.
48
49 config PS3_DYNAMIC_DMA
50 depends on PPC_PS3
51 bool "PS3 Platform dynamic DMA page table management"
52 default n
53 help
54 This option will enable kernel support to take advantage of the
55 per device dynamic DMA page table management provided by the Cell
56 processor's IO Controller. This support incurs some runtime
57 overhead and also slightly increases kernel memory usage. The
58 current implementation should be considered experimental.
59
60 This support is mainly for Linux kernel development. If unsure,
61 say N.
62
63 config PS3_VUART
64 depends on PPC_PS3
65 tristate
66
67 config PS3_PS3AV
68 depends on PPC_PS3
69 tristate "PS3 AV settings driver" if PS3_ADVANCED
70 select PS3_VUART
71 default y
72 help
73 Include support for the PS3 AV Settings driver.
74
75 This support is required for PS3 graphics and sound. In
76 general, all users will say Y or M.
77
78 config PS3_SYS_MANAGER
79 depends on PPC_PS3
80 tristate "PS3 System Manager driver" if PS3_ADVANCED
81 select PS3_VUART
82 default y
83 help
84 Include support for the PS3 System Manager.
85
86 This support is required for PS3 system control. In
87 general, all users will say Y or M.
88
89 config PS3_REPOSITORY_WRITE
90 bool "PS3 Repository write support" if PS3_ADVANCED
91 depends on PPC_PS3
92 default n
93 help
94 Enables support for writing to the PS3 System Repository.
95
96 This support is intended for bootloaders that need to store data
97 in the repository for later boot stages.
98
99 If in doubt, say N here and reduce the size of the kernel by a
100 small amount.
101
102 config PS3_STORAGE
103 depends on PPC_PS3
104 tristate
105
106 config PS3_DISK
107 tristate "PS3 Disk Storage Driver"
108 depends on PPC_PS3 && BLOCK
109 select PS3_STORAGE
110 help
111 Include support for the PS3 Disk Storage.
112
113 This support is required to access the PS3 hard disk.
114 In general, all users will say Y or M.
115
116 config PS3_ROM
117 tristate "PS3 BD/DVD/CD-ROM Storage Driver"
118 depends on PPC_PS3 && SCSI
119 select PS3_STORAGE
120 help
121 Include support for the PS3 ROM Storage.
122
123 This support is required to access the PS3 BD/DVD/CD-ROM drive.
124 In general, all users will say Y or M.
125 Also make sure to say Y or M to "SCSI CDROM support" later.
126
127 config PS3_FLASH
128 tristate "PS3 FLASH ROM Storage Driver"
129 depends on PPC_PS3
130 select PS3_STORAGE
131 help
132 Include support for the PS3 FLASH ROM Storage.
133
134 This support is required to access the PS3 FLASH ROM, which
135 contains the boot loader and some boot options.
136 In general, PS3 OtherOS users will say Y or M.
137
138 As this driver needs a fixed buffer of 256 KiB of memory, it can
139 be disabled on the kernel command line using "ps3flash=off", to
140 not allocate this fixed buffer.
141
142 config PS3_VRAM
143 tristate "PS3 Video RAM Storage Driver"
144 depends on FB_PS3=y && BLOCK && m
145 help
146 This driver allows you to use excess PS3 video RAM as volatile
147 storage or system swap.
148
149 config PS3_LPM
150 tristate "PS3 Logical Performance Monitor support"
151 depends on PPC_PS3
152 help
153 Include support for the PS3 Logical Performance Monitor.
154
155 This support is required to use the logical performance monitor
156 of the PS3's LV1 hypervisor.
157
158 If you intend to use the advanced performance monitoring and
159 profiling support of the Cell processor with programs like
160 oprofile and perfmon2, then say Y or M, otherwise say N.
161
162 config PS3GELIC_UDBG
163 bool "PS3 udbg output via UDP broadcasts on Ethernet"
164 depends on PPC_PS3
165 help
166 Enables udbg early debugging output by sending broadcast UDP
167 via the Ethernet port (UDP port number 18194).
168
169 This driver uses a trivial implementation and is independent
170 from the main PS3 gelic network driver.
171
172 If in doubt, say N here.
173
174 endmenu