Linus Torvalds [Fri, 3 May 2024 23:21:05 +0000 (16:21 -0700)]
Merge tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
Linus Torvalds [Fri, 3 May 2024 19:10:41 +0000 (12:10 -0700)]
Merge tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes when running as Xen PV guests for issues introduced in the
6.9 merge window, both related to apic id handling"
* tag 'for-linus-6.9a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: return a sane initial apic id when running as PV guest
x86/xen/smp_pv: Register the boot CPU APIC properly
Linus Torvalds [Fri, 3 May 2024 19:05:19 +0000 (12:05 -0700)]
Merge tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"This works around a shortcoming in the memory acceptation API, which
may apparently hog the CPU for long enough to trigger the softlockup
watchdog.
Note that this only affects confidential VMs running under the Intel
TDX hypervisor, which is why I accepted this for now, but this should
obviously be fixed properly in the future"
* tag 'efi-urgent-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: touch soft lockup during memory accept
Linus Torvalds [Fri, 3 May 2024 16:33:59 +0000 (09:33 -0700)]
Merge tag 'block-6.9-20240503' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Nothing major in here - an nvme pull request with mostly auth/tcp
fixes, and a single fix for ublk not setting segment count and size
limits"
* tag 'block-6.9-20240503' of git://git.kernel.dk/linux:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
ublk: remove segment count and size limits
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
Linus Torvalds [Fri, 3 May 2024 16:24:46 +0000 (09:24 -0700)]
Merge tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As usual in a late stage, we received a fair amount of fixes for ASoC,
and it became bigger than wished. But all fixes are rather device-
specific, and they look pretty safe to apply.
A major par of changes are series of fixes for ASoC meson and SOF
drivers as well as for Realtek and Cirrus codecs. In addition, recent
emu10k1 regression fixes and usual HD-audio quirks are included"
* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: hda/realtek: Fix build error without CONFIG_PM
ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
ASoC: cs35l56: fix usages of device_get_named_child_node()
ASoC: da7219-aad: fix usage of device_get_named_child_node()
ASoC: meson: cards: select SND_DYNAMIC_MINORS
ASoC: meson: axg-tdm: add continuous clock support
ASoC: meson: axg-tdm-interface: manage formatters in trigger
ASoC: meson: axg-card: make links nonatomic
ASoC: meson: axg-fifo: use threaded irq to check periods
ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
ALSA: emu10k1: fix E-MU dock initialization
ALSA: emu10k1: use mutex for E-MU FPGA access locking
ALSA: emu10k1: move the whole GPIO event handling to the workqueue
ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
ALSA: emu10k1: fix E-MU card dock presence monitoring
ASoC: rt715-sdca: volume step modification
...
panel:
- ili9341: avoid OF for device properties; respect deferred probe;
fix usage of errno codes
ttm:
- fix status output
vmwgfx:
- fix legacy display unit
- fix read length in fence signalling"
* tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/xe/display: Fix ADL-N detection
drm/panel: ili9341: Use predefined error codes
drm/panel: ili9341: Respect deferred probe
drm/panel: ili9341: Correct use of device property APIs
drm/xe/vm: prevent UAF in rebind_work_func()
drm/amd/display: Disable panel replay by default for now
drm/amdgpu: fix doorbell regression
drm/amdkfd: Flush the process wq before creating a kfd_process
drm/amd/display: Disable seamless boot on 128b/132b encoding
drm/amd/display: Fix DC mode screen flickering on DCN321
drm/amd/display: Add VCO speed parameter for DCN31 FPU
drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
drm/amd/display: Allocate zero bw after bw alloc enable
drm/amd/display: Fix incorrect DSC instance for MST
drm/amd/display: Atom Integrated System Info v2_2 for DCN35
drm/amd/display: Add dtbclk access to dcn315
drm/amd/display: Ensure that dmcub support flag is set for DCN20
drm/amd/display: Handle Y carry-over in VCP X.Y calculation
drm/amdgpu: Fix VRAM memory accounting
drm/vmwgfx: Fix invalid reads in fence signaled events
...
Linus Torvalds [Fri, 3 May 2024 16:12:28 +0000 (09:12 -0700)]
Merge tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v6.9,
The core fix is for issues with reuse of a spi_message in the case
where we've got queued messages (a relatively rare occurrence with
modern code so it wasn't noticed in testing).
We also avoid an issue with the Kunpeng driver by simply removing the
debug interface that could trigger it, and address issues with
confusing and corrupted output when printing the IP version of the AXI
SPI engine"
* tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix null pointer dereference within spi_sync
spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs
spi: axi-spi-engine: fix version format string
Linus Torvalds [Thu, 2 May 2024 17:49:12 +0000 (10:49 -0700)]
Merge tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- set correct ram_bytes when splitting ordered extent. This can be
inconsistent on-disk but harmless as it's not used for calculations
and it's only advisory for compression
- fix lockdep splat when taking cleaner mutex in qgroups disable ioctl
- fix missing mutex unlock on error path when looking up sys chunk for
relocation
* tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: set correct ram_bytes when splitting ordered extent
btrfs: take the cleaner_mutex earlier in qgroup disable
btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()
Linus Torvalds [Thu, 2 May 2024 17:43:35 +0000 (10:43 -0700)]
Merge tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/paes: Reestablish retry loop in paes
s390/zcrypt: Use EBUSY to indicate temp unavailability
s390/zcrypt: Handle ep11 cprb return code
s390/zcrypt: Fix wrong format string in debug feature printout
s390/cio: Ensure the copied buf is NUL terminated
s390/vdso: Add CFI for RA register to asm macro vdso_func
s390/3270: Fix buffer assignment
s390/mm: Fix clearing storage keys for huge pages
s390/mm: Fix storage key clearing for guest huge pages
Linus Torvalds [Thu, 2 May 2024 17:41:28 +0000 (10:41 -0700)]
Merge tag 'xtensa-20240502' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix unused variable warning caused by empty flush_dcache_page()
definition
- fix stack unwinding on windowed noMMU XIP configurations
- fix Coccinelle warning 'opportunity for min()' in xtensa ISS platform
code
* tag 'xtensa-20240502' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: remove redundant flush_dcache_page and ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE macros
tty: xtensa/iss: Use min() to fix Coccinelle warning
xtensa: fix MAKE_PC_FROM_RA second argument
x86/xen: return a sane initial apic id when running as PV guest
With recent sanity checks for topology information added, there are now
warnings issued for APs when running as a Xen PV guest:
[Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0001
This is due to the initial APIC ID obtained via CPUID for PV guests is
always 0.
Avoid the warnings by synthesizing the CPUID data to contain the same
initial APIC ID as xen_pv_smp_config() is using for registering the
APIC IDs of all CPUs.
Fixes: 52128a7a21f7 ("86/cpu/topology: Make the APIC mismatch warnings complete") Signed-off-by: Juergen Gross <jgross@suse.com>
Lucas De Marchi [Thu, 25 Apr 2024 18:16:09 +0000 (11:16 -0700)]
drm/xe/display: Fix ADL-N detection
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
Linus Torvalds [Thu, 2 May 2024 16:05:21 +0000 (09:05 -0700)]
Merge tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"Two driver fixes:
- The firewire-ohci driver for 1394 OHCI hardware does not fill time
stamp for response packet when handling asynchronous transaction to
local destination. This brings an inconvenience that the response
packet is not equivalent between the transaction to local and
remote. It is fixed by fulfilling the time stamp with hardware
time. The fix should be applied to Linux kernel v6.5 or later as
well.
- The nosy driver for Texas Instruments TSB12LV21A (PCILynx) has
long-standing issue about the behaviour when user space application
passes less size of buffer than expected. It is fixed by returning
zero according to the convention of UNIX-like systems"
* tag 'firewire-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: fulfill timestamp for some local asynchronous transaction
firewire: nosy: ensure user_length is taken into account when fetching packet contents
Thomas Gleixner [Thu, 2 May 2024 14:39:47 +0000 (16:39 +0200)]
x86/xen/smp_pv: Register the boot CPU APIC properly
The topology core expects the boot APIC to be registered from earhy APIC
detection first and then again when the firmware tables are evaluated. This
is used for detecting the real BSP CPU on a kexec kernel.
The recent conversion of XEN/PV to register fake APIC IDs failed to
register the boot CPU APIC correctly as it only registers it once. This
causes the BSP detection mechanism to trigger wrongly:
CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 0 > 1
Additionally this results in one CPU being ignored.
Register the boot CPU APIC twice so that the XEN/PV fake enumeration
behaves like real firmware.
Linus Torvalds [Thu, 2 May 2024 16:01:27 +0000 (09:01 -0700)]
Merge tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix a memory leak and a few locking issues (that may cause the kernel
to crash in principle if all goes wrong) in the thermal debug code
introduced during the 6.8 development cycle"
* tag 'thermal-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/debugfs: Prevent use-after-free from occurring after cdev removal
thermal/debugfs: Fix two locking issues with thermal zone debug
thermal/debugfs: Free all thermal zone debug memory on zone removal
Linus Torvalds [Thu, 2 May 2024 15:51:47 +0000 (08:51 -0700)]
Merge tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
* git://git.infradead.org/nvme:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
====================
net: gro: add flush/flush_id checks and fix wrong offset in udp
This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.
In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.
The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.
This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/
v3 -> v4:
- Store network offsets, and use them only in udp_gro_complete flows
- Correct commit hash used in Fixes tag
- v3:
https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/
v2 -> v3:
- Add network_offsets and fix udp bug in a single commit to make backporting easier
- Write to inner_network_offset in {inet,ipv6}_gro_receive
- Use network_offsets union in tcp[46]_gro_complete as well
- v2:
https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/
v1 -> v2:
- Use network_offsets instead of p_poff param as suggested by Willem
- Check flush before postpull, and for all UDP GRO flows
- v1:
https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/
====================
Richard Gobert [Tue, 30 Apr 2024 14:35:55 +0000 (16:35 +0200)]
net: gro: add flush check in udp_gro_receive_segment
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Richard Gobert [Tue, 30 Apr 2024 14:35:54 +0000 (16:35 +0200)]
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp:
additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the
complete phase of gro. The functions always return skb->network_header,
which in the case of encapsulated packets at the gro complete phase, is
always set to the innermost L3 of the packet. That means that calling
{ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in
gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_
L3/L4 may return an unexpected value.
This incorrect usage leads to a bug in GRO's UDP socket lookup.
udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These
*_hdr functions return network_header which will point to the innermost L3,
resulting in the wrong offset being used in __udp{4,6}_lib_lookup with
encapsulated packets.
This patch adds network_offset and inner_network_offset to napi_gro_cb, and
makes sure both are set correctly.
To fix the issue, network_offsets union is used inside napi_gro_cb, in
which both the outer and the inner network offsets are saved.
Reproduction example:
Endpoint configuration example (fou + local address bind)
# ip fou add port 6666 ipproto 4
# ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip
# ip link set tun1 up
# ip a add 1.1.1.2/24 dev tun1
Netperf TCP_STREAM result on net-next before patch is applied:
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shigeru Yoshida [Tue, 30 Apr 2024 12:39:45 +0000 (21:39 +0900)]
ipv4: Fix uninit-value access in __ip_make_skb()
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
Andy Shevchenko [Thu, 25 Apr 2024 14:26:19 +0000 (17:26 +0300)]
drm/panel: ili9341: Use predefined error codes
In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.
Andy Shevchenko [Thu, 25 Apr 2024 14:26:18 +0000 (17:26 +0300)]
drm/panel: ili9341: Respect deferred probe
GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.
Alexandra Winter [Tue, 30 Apr 2024 09:10:04 +0000 (11:10 +0200)]
s390/qeth: Fix kernel panic after setting hsuid
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Takashi Iwai [Thu, 2 May 2024 06:24:42 +0000 (08:24 +0200)]
ALSA: hda/realtek: Fix build error without CONFIG_PM
The alc_spec.power_hook is defined only with CONFIG_PM, and the recent
fix overlooked it, resulting in a build error without CONFIG_PM.
Fix it with the simple ifdef and set __maybe_unused for the function.
We may drop the whole CONFIG_PM dependency there, but it should be
done in a separate cleanup patch later.
Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202405012104.Dr7h318W-lkp@intel.com/
Message-ID: <20240502062442.30545-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure the inner IP header is part of skb's linear data before reading
its ECN bits. Otherwise we might read garbage.
One symptom is the system erroneously logging errors like
"vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx".
Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see
commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()") for example). So let's reuse the same code structure for
consistency. Maybe we'll can add a common helper in the future.
Xin Long [Tue, 30 Apr 2024 14:03:38 +0000 (10:03 -0400)]
tipc: fix a possible memleak in tipc_buf_append
__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.
Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 30 Apr 2024 13:53:37 +0000 (15:53 +0200)]
tipc: fix UAF in error path
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:
BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034
In the critical scenario, either the relevant skb is freed or its
ownership is transferred into a frag_lists. In both cases, the cleanup
code must not free it again: we need to clear the skb reference earlier.
Fixes: 1149557d64c9 ("tipc: eliminate unnecessary linearization of incoming buffers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852 Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The find connection logic of Transarc's Rx was modified in the mid-1990s
to support multi-homed servers which might send a response packet from
an address other than the destination address in the received packet.
The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION)
were altered to permit acceptance of a packet from any address provided
that the port number was unchanged and all of the connection identifiers
matched (Epoch, CID, SecurityClass, ...).
This change applies the same rules to the Linux implementation which makes
it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Jeffrey Altman <jaltman@auristor.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Takashi Iwai [Wed, 1 May 2024 16:05:13 +0000 (18:05 +0200)]
Merge tag 'asoc-fix-v6.9-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times. It's all driver specific stuff.
The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms. The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.
Linus Torvalds [Wed, 1 May 2024 15:58:56 +0000 (08:58 -0700)]
Merge tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"There's a few simple driver specific fixes here, plus some core
cleanups from Matti which fix issues found with client drivers due to
the API being confusing.
The two fixes for the stubs provide more constructive behaviour with
!REGULATOR configurations, issues were noticed with some hwmon drivers
which would otherwise have needed confusing bodges in the users.
The irq_helpers fix to duplicate the provided name for the interrupt
controller was found because a driver got this wrong and it's again a
case where the core is the sensible place to put the fix"
* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: change devm_regulator_get_enable_optional() stub to return Ok
regulator: change stubbed devm_regulator_get_enable to return Ok
regulator: vqmmc-ipq4019: fix module autoloading
regulator: qcom-refgen: fix module autoloading
regulator: mt6360: De-capitalize devicetree regulator subnodes
regulator: irq_helpers: duplicate IRQ name
Matthew Auld [Tue, 23 Apr 2024 07:47:23 +0000 (08:47 +0100)]
drm/xe/vm: prevent UAF in rebind_work_func()
We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed. The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.
v2:
- Grabbing vm->lock in the preempt worker creates a deadlock, so
checking the closed state is tricky. Instead flush the worker when
the refcount reaches zero. It should be impossible to queue the
preempt worker without already holding vm ref.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304 Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com
(cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
drm/amd/display: Disable panel replay by default for now
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344 Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Fietkau [Sat, 27 Apr 2024 18:24:19 +0000 (20:24 +0200)]
net: core: reject skb_copy(_expand) for fraglist GSO skbs
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Sat, 27 Apr 2024 18:24:18 +0000 (20:24 +0200)]
net: bridge: fix multicast-to-unicast with fraglist GSO
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.
Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Reinecke [Thu, 18 Apr 2024 10:39:45 +0000 (12:39 +0200)]
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.
Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
nvmet: fix nvme status code when namespace is disabled
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn> Tested-by: Jirong Feng <jirong.feng@easystack.cn> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
nvmet-tcp: fix possible memory leak when tearing down a controller
When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.
However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.
Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.
Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme: cancel pending I/O if nvme controller is in terminal state
While I/O is running, if the pci bus error occurs then
in-flight I/O can not complete. Worst, if at this time,
user (logically) hot-unplug the nvme disk then the
nvme_remove() code path can't forward progress until
in-flight I/O is cancelled. So these sequence of events
may potentially hang hot-unplug code path indefinitely.
This patch helps cancel the pending/in-flight I/O from the
nvme request timeout handler in case the nvme controller
is in the terminal (DEAD/DELETING/DELETING_NOIO) state and
that helps nvme_remove() code path forward progress and
finish successfully.
nvme: find numa distance only if controller has valid numa id
On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).
With commit ed6776c96c60 ("s390/crypto: remove retry
loop with sleep from PAES pkey invocation") the retry
loop to retry derivation of a protected key from a
secure key has been removed. This was based on the
assumption that theses retries are not needed any
more as proper retries are done in the zcrypt layer.
However, tests have revealed that there exist some
cases with master key change in the HSM and immediately
(< 1 second) attempt to derive a protected key from a
secure key with exact this HSM may eventually fail.
The low level functions in zcrypt_ccamisc.c and
zcrypt_ep11misc.c detect and report this temporary
failure and report it to the caller as -EBUSY. The
re-established retry loop in the paes implementation
catches exactly this -EBUSY and eventually may run
some retries.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
s390/zcrypt: Use EBUSY to indicate temp unavailability
Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c
in cases where the CCA card returns 8/2290 to indicate
a temporarily unavailability of this function.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
An EP11 reply cprb contains a field ret_code which may
hold an error code different than the error code stored
in the payload of the cprb. As of now all the EP11 misc
functions do not evaluate this field but focus on the
error code in the payload.
Before checking the payload error, first the cprb error
field should be evaluated which is introduced with this
patch.
If the return code value 0x000c0003 is seen, this
indicates a busy situation which is reflected by
-EBUSY in the zcrpyt_ep11misc.c low level function.
A higher level caller should consider to retry after
waiting a dedicated duration (say 1 second).
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Mans Rullgard [Tue, 30 Apr 2024 18:27:05 +0000 (19:27 +0100)]
spi: fix null pointer dereference within spi_sync
If spi_sync() is called with the non-empty queue and the same spi_message
is then reused, the complete callback for the message remains set while
the context is cleared, leading to a null pointer dereference when the
callback is invoked from spi_finalize_current_message().
With function inlining disabled, the call stack might look like this:
_raw_spin_lock_irqsave from complete_with_flags+0x18/0x58
complete_with_flags from spi_complete+0x8/0xc
spi_complete from spi_finalize_current_message+0xec/0x184
spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474
spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230
__spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4
__spi_transfer_message_noqueue from __spi_sync+0x204/0x248
__spi_sync from spi_sync+0x24/0x3c
spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd]
mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154
_regmap_raw_read from _regmap_bus_read+0x44/0x70
_regmap_bus_read from _regmap_read+0x60/0xd8
_regmap_read from regmap_read+0x3c/0x5c
regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd]
mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd]
mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x118/0x1f4
irq_thread from kthread+0xd8/0xf4
kthread from ret_from_fork+0x14/0x28
Fix this by also setting message->complete to NULL when the transfer is
complete.
Lancelot SIX [Wed, 10 Apr 2024 13:14:13 +0000 (14:14 +0100)]
drm/amdkfd: Flush the process wq before creating a kfd_process
There is a race condition when re-creating a kfd_process for a process.
This has been observed when a process under the debugger executes
exec(3). In this scenario:
- The process executes exec.
- This will eventually release the process's mm, which will cause the
kfd_process object associated with the process to be freed
(kfd_process_free_notifier decrements the reference count to the
kfd_process to 0). This causes kfd_process_ref_release to enqueue
kfd_process_wq_release to the kfd_process_wq.
- The debugger receives the PTRACE_EVENT_EXEC notification, and tries to
re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE).
- When handling this request, KFD tries to re-create a kfd_process.
This eventually calls kfd_create_process and kobject_init_and_add.
At this point the call to kobject_init_and_add can fail because the
old kfd_process.kobj has not been freed yet by kfd_process_wq_release.
This patch proposes to avoid this race by making sure to drain
kfd_process_wq before creating a new kfd_process object. This way, we
know that any cleanup task is done executing when we reach
kobject_init_and_add.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Disable seamless boot on 128b/132b encoding
[why]
preOS will not support display mode programming and link training
for UHBR rates.
[how]
If we detect a sink that's UHBR capable, disable seamless boot
Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When fallback to TCP happens early on a client socket, snd_nxt
is not yet initialized and any incoming ack will copy such value
into snd_una. If the mptcp worker (dumbly) tries mptcp-level
re-injection after such ack, that would unconditionally trigger a send
buffer cleanup using 'bad' snd_una values.
We could easily disable re-injection for fallback sockets, but such
dumb behavior already helped catching a few subtle issues and a very
low to zero impact in practice.
Instead address the issue always initializing snd_nxt (and write_seq,
for consistency) at connect time.
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485 Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240429-upstream-net-20240429-mptcp-snd_nxt-init-connect-v1-1-59ceac0a7dcb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leo Ma [Thu, 11 Apr 2024 21:17:04 +0000 (17:17 -0400)]
drm/amd/display: Fix DC mode screen flickering on DCN321
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add VCO speed parameter for DCN31 FPU
Add VCO speed parameters in the bounding box array.
Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
e1000e: change usleep_range to udelay in PHY mdic access
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay.
Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by: Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/ Co-developed-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian König [Thu, 21 Mar 2024 10:32:02 +0000 (11:32 +0100)]
drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move
on same heap. The basic problem here is that after the move the old
location is simply not available any more.
Some fixes were suggested, but essentially we should call the move
notification before actually moving things because only this way we have
the correct order for DMA-buf and VM move notifications as well.
Also rework the statistic handling so that we don't update the eviction
counter before the move.
v2: add missing NULL check
Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 94aeb4117343 ("drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3171 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
drm/amd/display: Allocate zero bw after bw alloc enable
[Why]
During DP tunnel creation, CM preallocates BW and reduces
estimated BW of other DPIA. CM release preallocation only
when allocation is complete. Display mode validation logic
validates timings based on bw available per host router.
In multi display setup, this causes bw allocation failure
when allocation greater than estimated bw.
[How]
Do zero alloc to make the CM to release preallocation and
update estimated BW correctly for all DPIAs per host router.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Tue, 13 Feb 2024 19:26:06 +0000 (14:26 -0500)]
drm/amd/display: Fix incorrect DSC instance for MST
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
CC: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gabe Teeger [Tue, 9 Apr 2024 14:38:58 +0000 (10:38 -0400)]
drm/amd/display: Atom Integrated System Info v2_2 for DCN35
New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.
DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently DCN315 clk manager is missing code to enable/disable dtbclk.
Because of this, "optimized_required" flag is constantly set
and this prevents FreeSync from engaging for certain high bandwidth
display Modes which require DTBCLK.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.
Use __netif_tx_lock_bh() for TX queue locking.
Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path") Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com> Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/ Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunsheng Lin [Sun, 28 Apr 2024 11:16:38 +0000 (19:16 +0800)]
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
rxrpc_alloc_data_txbuf() may be called with data_align being
zero in none_alloc_txbuf() and rxkad_alloc_txbuf(), data_align
is supposed to be an order-based alignment value, but zero is
not a valid order-based alignment value, and '~(data_align - 1)'
doesn't result in a valid mask-based alignment value for
__page_frag_alloc_align().
Fix it by passing a valid order-based alignment value in
none_alloc_txbuf() and rxkad_alloc_txbuf().
Also use page_frag_alloc_align() expecting an order-based
alignment value in rxrpc_alloc_data_txbuf() to avoid doing the
alignment converting operation and to catch possible invalid
alignment value in the future. Remove the 'if (data_align)'
checking too, as it is always true for a valid order-based
alignment value.
Fixes: 6b2536462fd4 ("rxrpc: Fix use of changed alignment param to page_frag_alloc_align()") Fixes: 49489bb03a50 ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags") CC: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20240428111640.27306-1-linyunsheng@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subtract the VRAM pinned memory when checking for available memory
in amdgpu_amdkfd_reserve_mem_limit function since that memory is not
available for use.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ublk_drv currently creates block devices with the default max_segments
and max_segment_size limits of BLK_MAX_SEGMENTS (128) and
BLK_MAX_SEGMENT_SIZE (65536) respectively. These defaults can
artificially constrain the I/O size seen by the ublk server - for
example, suppose that the ublk server has configured itself to accept
I/Os up to 1M and the application is also issuing 1M sized I/Os. If the
I/O buffer used by the application is backed by 4K pages, the buffer
could consist of up to 1M / 4K = 256 physically discontiguous segments
(even if the buffer is virtually contiguous). As such, the I/O could
exceed the default max_segments limit and get split. This can cause
unnecessary performance issues if the ublk server is optimized to handle
1M I/Os. The block layer's segment count/size limits exist to model
hardware constraints which don't exist in ublk_drv's case, so just
remove those limits for the block devices created by ublk_drv.
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
"A pretty straightforward fix for a NULL pointer dereference, plus the
accompanying reproducer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for uaccesses to non-existent vgic-v2 CPUIF
KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
drm/vmwgfx: Fix invalid reads in fence signaled events
Correctly set the length of the drm_event to the size of the structure
that's actually used.
The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads.
Lyude Paul [Mon, 29 Apr 2024 18:23:09 +0000 (14:23 -0400)]
drm/nouveau/gsp: Use the sg allocator for level 2 of radix3
Currently we allocate all 3 levels of radix3 page tables using
nvkm_gsp_mem_ctor(), which uses dma_alloc_coherent() for allocating all of
the relevant memory. This can end up failing in scenarios where the system
has very high memory fragmentation, and we can't find enough contiguous
memory to allocate level 2 of the page table.
Currently, this can result in runtime PM issues on systems where memory
fragmentation is high - as we'll fail to allocate the page table for our
suspend/resume buffer:
Luckily, we don't actually need to allocate coherent memory for the page
table thanks to being able to pass the GPU a radix3 page table for
suspend/resume data. So, let's rewrite nvkm_gsp_radix3_sg() to use the sg
allocator for level 2. We continue using coherent allocations for lvl0 and
1, since they only take a single page.
V2:
* Don't forget to actually jump to the next scatterlist when we reach the
end of the scatterlist we're currently on when writing out the page table
for level 2
We hit this when trying to initialize firmware of type
NVKM_FIRMWARE_IMG_DMA because we allocate our memory with
dma_alloc_coherent, and DMA allocations can't be turned back into memory
pages - which a scatterlist needs in order to map them.
So, fix this by allocating the memory with vmalloc instead().
V2:
* Fixup explanation as the prior one was bogus
Unfortunately both Lenovo Legion Pro 7 16ARX8H and Legion 7i 16IAX7
got the very same PCI SSID while the hardware implementations are
completely different (the former is with TI TAS2781 codec while the
latter is with Cirrus CS35L41 codec). The former model got broken by
the recent fix for the latter model.
For addressing the regression, check the codec SSID and apply the
proper quirk for each model now.
Kailang Yang [Tue, 30 Apr 2024 09:15:53 +0000 (17:15 +0800)]
ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
There is a chance of damaging the IC when S4 resume.
Add safe mode for no stream to disable GPIO3.
Thinkpad with ALC1318 platform need to add this workaround.
Merge tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Add Grand Ridge to HPM CPU list
* tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Add Grand Ridge to HPM CPU list
Merge tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
Mark Brown [Tue, 30 Apr 2024 14:36:23 +0000 (23:36 +0900)]
ASoC: meson: tdm fixes
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This patchset fixes 2 problems on TDM which both find a solution
by properly implementing the .trigger() callback for the TDM backend.
ATM, enabling the TDM formatters is done by the .prepare() callback
because handling the formatter is slow due to necessary calls to CCF.
The first problem affects the TDMIN. Because .prepare() is called on DPCM
backend first, the formatter are started before the FIFOs and this may
cause a random channel shifts if the TDMIN use multiple lanes with more
than 2 slots per lanes. Using trigger() allows to set the FE/BE order,
solving the problem.
There has already been an attempt to fix this 3y ago [1] and reverted [2]
It triggered a 'sleep in irq' error on the period IRQ. The solution is
to just use the bottom half of threaded IRQ. This is patch #1. Patch #2
and #3 remain mostly the same as 3y ago.
For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and
the TDMOUT just starves. When it does, it will actually repeat the last
sample continuously. Depending on the platform, if there is no high-pass
filter on the analog path, this may translate to a constant position of
the speaker membrane. There is no audible glitch but it may damage the
speaker coil.
Properly stopping the TDMOUT in pause solves the problem. There is
behaviour change associated with that fix. Clocks used to be continuous
on pause because of the problem above. They will now be gated on pause by
default, as they should. The last change introduce the proper support for
continuous clocks, if needed.
btrfs: set correct ram_bytes when splitting ordered extent
[BUG]
When running generic/287, the following file extent items can be
generated:
item 16 key (258 EXTENT_DATA 2682880) itemoff 15305 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 1378414592 nr 462848
extent data offset 0 nr 462848 ram 2097152
extent compression 0 (none)
Note that file extent item is not a compressed one, but its ram_bytes is
way larger than its disk_num_bytes.
According to btrfs on-disk scheme, ram_bytes should match disk_num_bytes
if it's not a compressed one.
[CAUSE]
Since commit b73a6fd1b1ef ("btrfs: split partial dio bios before
submit"), for partial dio writes, we would split the ordered extent.
However the function btrfs_split_ordered_extent() doesn't update the
ram_bytes even it has already shrunk the disk_num_bytes.
Originally the function btrfs_split_ordered_extent() is only introduced
for zoned devices in commit d22002fd37bd ("btrfs: zoned: split ordered
extent when bio is sent"), but later commit b73a6fd1b1ef ("btrfs: split
partial dio bios before submit") makes non-zoned btrfs affected.
Thankfully for un-compressed file extent, we do not really utilize the
ram_bytes member, thus it won't cause any real problem.
[FIX]
Also update btrfs_ordered_extent::ram_bytes inside
btrfs_split_ordered_extent().
Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Merge tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two doc update patches and the following three fixes:
- On single node systems, the default pool is used but the
node_nr_active for the default pool was set to min_active. This
effectively limited the max concurrency of unbound pools on single
node systems to 8 causing performance regressions on some
workloads. Fixed by setting the default pool's node_nr_active to
max_active.
- wq_update_node_max_active() could trigger divide-by-zero if the
intersection between the allowed CPUs for an unbound workqueue and
online CPUs becomes empty.
- When kick_pool() was trying to repatriate a worker to a CPU in its
pod by setting task->wake_cpu, it didn't consider whether the CPU
being selected is online or not which obviously can lead to
subobtimal behaviors. On s390, this triggered a crash in arch code.
The workqueue patch removes the gross misbehavior but doesn't fix
the crash completely as there's a race window in which CPUs can go
down after wake_cpu is set. Need to decide whether the fix should
be on the core or arch side"
* tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix divide error in wq_update_node_max_active()
workqueue: The default node_nr_active should have its max set to max_active
workqueue: Fix selection of wake_cpu in kick_pool()
docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1
Documentation/core-api: Update events_freezable_power references.
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Minor core fix to prevent the sd driver printing the stream count
every time we rescan and instead print only if it's changed"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Only print updates to permanent stream count
Merge tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- Fix an Oops in xs_tcp_tls_setup_socket
- Fix an Oops due to missing error handling in nfs_net_init()
* tag 'nfs-for-6.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Handle error of rpc_proc_register() in nfs_net_init().
SUNRPC: add a missing rpc_stat for TCP TLS
Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead.
Dave Jiang [Fri, 26 Apr 2024 22:47:56 +0000 (15:47 -0700)]
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
Robert reported the following when booting a CXL host with Restricted CXL
Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device
[ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]
... plus some related subsequent NULL pointer dereference:
The iterator to walk the PCIe path did not account for RCH topology.
However RCH does not support hotplug and the memory exported by the
Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinate is needed. Add check to see if the endpoint device is
RCD and skip calculation.
Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order
to exercise the topology iterator. The dev_is_pci() check added is to help
with this test and should be harmless for normal operation.
Reported-by: Robert Richter <rrichter@amd.com> Closes: https://lore.kernel.org/all/Ziv8GfSMSbvlBB0h@rric.localdomain/ Fixes: 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Robert Richter <rrichter@amd.com> Reviewed-by: Robert Richter <rrichter@amd.com> Link: https://lore.kernel.org/r/20240426224913.1027420-1-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Merge tag 'erofs-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Three fixes related to EROFS fscache mode. The most important two
patches fix calling kill_block_super() in bdev-based mode instead of
kill_anon_super(). The remaining patch is an informative one.
Summary:
- Better error message when prepare_ondemand_read failed
- Fix unmount of bdev-based mode if CONFIG_EROFS_FS_ONDEMAND is on"
* tag 'erofs-for-6.9-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: reliably distinguish block based and fscache mode
erofs: get rid of erofs_fs_context
erofs: modify the error message when prepare_ondemand_read failed
The SOF driver is selected whenever specific I2C/I2S HIDs are reported
as 'present' in the ACPI DSDT. In some cases, an HID is reported but
the hardware does not actually rely on I2C/I2S. This false positive
leads to an invalid selection of the SOF driver and as a result an
invalid topology is loaded.
This patch hardens the detection with a check that the NHLT table is
consistent with the report of an I2S-based codec in DSDT. This table
should expose at least one SSP endpoint configured for an I2S-codec
connection.
Tested on Huawei Matebook D14 (NBLB-WAX9N) using an HDaudio codec with
an invalid ES8336 ACPI HID reported:
[ 7.858249] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 7.858312] snd_hda_intel 0000:00:1f.3: snd_intel_dsp_find_config: no valid SSP found for HID ESSX8336, skipped
Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
ASoC: meson: axg-tdm-interface: manage formatters in trigger
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex. A mutex is used because formatter handling require dealing
possibly slow clock operation.
With the support of non-atomic, .trigger() callback may be used which also
allows to properly enable and disable formatters on start but also
pause/resume.
This solve a random shift on TDMIN as well repeated samples on for TDMOUT.
projects / thirdparty / kernel / linux.git / log
