1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * dvb_frontend.c: DVB frontend tuning interface/thread
5 * Copyright (C) 1999-2001 Ralph Metzler
8 * for convergence integrated media GmbH
10 * Copyright (C) 2004 Andrew de Quincey (tuning thread cleanup)
13 /* Enables DVBv3 compatibility bits at the headers */
16 #define pr_fmt(fmt) "dvb_frontend: " fmt
18 #include <linux/string.h>
19 #include <linux/kernel.h>
20 #include <linux/sched/signal.h>
21 #include <linux/wait.h>
22 #include <linux/slab.h>
23 #include <linux/poll.h>
24 #include <linux/semaphore.h>
25 #include <linux/module.h>
26 #include <linux/list.h>
27 #include <linux/freezer.h>
28 #include <linux/jiffies.h>
29 #include <linux/kthread.h>
30 #include <linux/ktime.h>
31 #include <linux/compat.h>
32 #include <asm/processor.h>
34 #include <media/dvb_frontend.h>
35 #include <media/dvbdev.h>
36 #include <linux/dvb/version.h>
38 static int dvb_frontend_debug
;
39 static int dvb_shutdown_timeout
;
40 static int dvb_force_auto_inversion
;
41 static int dvb_override_tune_delay
;
42 static int dvb_powerdown_on_sleep
= 1;
43 static int dvb_mfe_wait_time
= 5;
45 module_param_named(frontend_debug
, dvb_frontend_debug
, int, 0644);
46 MODULE_PARM_DESC(frontend_debug
, "Turn on/off frontend core debugging (default:off).");
47 module_param(dvb_shutdown_timeout
, int, 0644);
48 MODULE_PARM_DESC(dvb_shutdown_timeout
, "wait <shutdown_timeout> seconds after close() before suspending hardware");
49 module_param(dvb_force_auto_inversion
, int, 0644);
50 MODULE_PARM_DESC(dvb_force_auto_inversion
, "0: normal (default), 1: INVERSION_AUTO forced always");
51 module_param(dvb_override_tune_delay
, int, 0644);
52 MODULE_PARM_DESC(dvb_override_tune_delay
, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt");
53 module_param(dvb_powerdown_on_sleep
, int, 0644);
54 MODULE_PARM_DESC(dvb_powerdown_on_sleep
, "0: do not power down, 1: turn LNB voltage off on sleep (default)");
55 module_param(dvb_mfe_wait_time
, int, 0644);
56 MODULE_PARM_DESC(dvb_mfe_wait_time
, "Wait up to <mfe_wait_time> seconds on open() for multi-frontend to become available (default:5 seconds)");
58 #define dprintk(fmt, arg...) \
59 printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg)
61 #define FESTATE_IDLE 1
62 #define FESTATE_RETUNE 2
63 #define FESTATE_TUNING_FAST 4
64 #define FESTATE_TUNING_SLOW 8
65 #define FESTATE_TUNED 16
66 #define FESTATE_ZIGZAG_FAST 32
67 #define FESTATE_ZIGZAG_SLOW 64
68 #define FESTATE_DISEQC 128
69 #define FESTATE_ERROR 256
70 #define FESTATE_WAITFORLOCK (FESTATE_TUNING_FAST | FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW | FESTATE_DISEQC)
71 #define FESTATE_SEARCHING_FAST (FESTATE_TUNING_FAST | FESTATE_ZIGZAG_FAST)
72 #define FESTATE_SEARCHING_SLOW (FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_SLOW)
73 #define FESTATE_LOSTLOCK (FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW)
76 * FESTATE_IDLE. No tuning parameters have been supplied and the loop is idling.
77 * FESTATE_RETUNE. Parameters have been supplied, but we have not yet performed the first tune.
78 * FESTATE_TUNING_FAST. Tuning parameters have been supplied and fast zigzag scan is in progress.
79 * FESTATE_TUNING_SLOW. Tuning parameters have been supplied. Fast zigzag failed, so we're trying again, but slower.
80 * FESTATE_TUNED. The frontend has successfully locked on.
81 * FESTATE_ZIGZAG_FAST. The lock has been lost, and a fast zigzag has been initiated to try and regain it.
82 * FESTATE_ZIGZAG_SLOW. The lock has been lost. Fast zigzag has been failed, so we're trying again, but slower.
83 * FESTATE_DISEQC. A DISEQC command has just been issued.
84 * FESTATE_WAITFORLOCK. When we're waiting for a lock.
85 * FESTATE_SEARCHING_FAST. When we're searching for a signal using a fast zigzag scan.
86 * FESTATE_SEARCHING_SLOW. When we're searching for a signal using a slow zigzag scan.
87 * FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again.
90 static DEFINE_MUTEX(frontend_mutex
);
92 struct dvb_frontend_private
{
93 /* thread/frontend values */
94 struct dvb_device
*dvbdev
;
95 struct dvb_frontend_parameters parameters_out
;
96 struct dvb_fe_events events
;
98 struct list_head list_head
;
99 wait_queue_head_t wait_queue
;
100 struct task_struct
*thread
;
101 unsigned long release_jiffies
;
103 enum fe_status status
;
104 unsigned long tune_mode_flags
;
106 unsigned int reinitialise
;
110 /* swzigzag values */
112 unsigned int bending
;
114 unsigned int inversion
;
115 unsigned int auto_step
;
116 unsigned int auto_sub_step
;
117 unsigned int started_auto_step
;
118 unsigned int min_delay
;
119 unsigned int max_drift
;
120 unsigned int step_size
;
122 unsigned int check_wrapped
;
123 enum dvbfe_search algo_status
;
125 #if defined(CONFIG_MEDIA_CONTROLLER_DVB)
126 struct media_pipeline pipe
;
130 static void dvb_frontend_invoke_release(struct dvb_frontend
*fe
,
131 void (*release
)(struct dvb_frontend
*fe
));
133 static void __dvb_frontend_free(struct dvb_frontend
*fe
)
135 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
138 dvb_free_device(fepriv
->dvbdev
);
140 dvb_frontend_invoke_release(fe
, fe
->ops
.release
);
145 static void dvb_frontend_free(struct kref
*ref
)
147 struct dvb_frontend
*fe
=
148 container_of(ref
, struct dvb_frontend
, refcount
);
150 __dvb_frontend_free(fe
);
153 static void dvb_frontend_put(struct dvb_frontend
*fe
)
156 * Check if the frontend was registered, as otherwise
157 * kref was not initialized yet.
159 if (fe
->frontend_priv
)
160 kref_put(&fe
->refcount
, dvb_frontend_free
);
162 __dvb_frontend_free(fe
);
165 static void dvb_frontend_get(struct dvb_frontend
*fe
)
167 kref_get(&fe
->refcount
);
170 static void dvb_frontend_wakeup(struct dvb_frontend
*fe
);
171 static int dtv_get_frontend(struct dvb_frontend
*fe
,
172 struct dtv_frontend_properties
*c
,
173 struct dvb_frontend_parameters
*p_out
);
175 dtv_property_legacy_params_sync(struct dvb_frontend
*fe
,
176 const struct dtv_frontend_properties
*c
,
177 struct dvb_frontend_parameters
*p
);
179 static bool has_get_frontend(struct dvb_frontend
*fe
)
181 return fe
->ops
.get_frontend
;
185 * Due to DVBv3 API calls, a delivery system should be mapped into one of
186 * the 4 DVBv3 delivery systems (FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC),
187 * otherwise, a DVBv3 call will fail.
189 enum dvbv3_emulation_type
{
197 static enum dvbv3_emulation_type
dvbv3_type(u32 delivery_system
)
199 switch (delivery_system
) {
200 case SYS_DVBC_ANNEX_A
:
201 case SYS_DVBC_ANNEX_C
:
216 case SYS_DVBC_ANNEX_B
:
224 * Doesn't know how to emulate those types and/or
225 * there's no frontend driver from this type yet
226 * with some emulation code, so, we're not sure yet how
227 * to handle them, or they're not compatible with a DVBv3 call.
229 return DVBV3_UNKNOWN
;
233 static void dvb_frontend_add_event(struct dvb_frontend
*fe
,
234 enum fe_status status
)
236 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
237 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
238 struct dvb_fe_events
*events
= &fepriv
->events
;
239 struct dvb_frontend_event
*e
;
242 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
244 if ((status
& FE_HAS_LOCK
) && has_get_frontend(fe
))
245 dtv_get_frontend(fe
, c
, &fepriv
->parameters_out
);
247 mutex_lock(&events
->mtx
);
249 wp
= (events
->eventw
+ 1) % MAX_EVENT
;
250 if (wp
== events
->eventr
) {
251 events
->overflow
= 1;
252 events
->eventr
= (events
->eventr
+ 1) % MAX_EVENT
;
255 e
= &events
->events
[events
->eventw
];
257 e
->parameters
= fepriv
->parameters_out
;
261 mutex_unlock(&events
->mtx
);
263 wake_up_interruptible(&events
->wait_queue
);
266 static int dvb_frontend_test_event(struct dvb_frontend_private
*fepriv
,
267 struct dvb_fe_events
*events
)
272 ret
= events
->eventw
!= events
->eventr
;
278 static int dvb_frontend_get_event(struct dvb_frontend
*fe
,
279 struct dvb_frontend_event
*event
, int flags
)
281 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
282 struct dvb_fe_events
*events
= &fepriv
->events
;
284 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
286 if (events
->overflow
) {
287 events
->overflow
= 0;
291 if (events
->eventw
== events
->eventr
) {
294 if (flags
& O_NONBLOCK
)
297 ret
= wait_event_interruptible(events
->wait_queue
,
298 dvb_frontend_test_event(fepriv
, events
));
304 mutex_lock(&events
->mtx
);
305 *event
= events
->events
[events
->eventr
];
306 events
->eventr
= (events
->eventr
+ 1) % MAX_EVENT
;
307 mutex_unlock(&events
->mtx
);
312 static void dvb_frontend_clear_events(struct dvb_frontend
*fe
)
314 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
315 struct dvb_fe_events
*events
= &fepriv
->events
;
317 mutex_lock(&events
->mtx
);
318 events
->eventr
= events
->eventw
;
319 mutex_unlock(&events
->mtx
);
322 static void dvb_frontend_init(struct dvb_frontend
*fe
)
324 dev_dbg(fe
->dvb
->device
,
325 "%s: initialising adapter %i frontend %i (%s)...\n",
326 __func__
, fe
->dvb
->num
, fe
->id
, fe
->ops
.info
.name
);
330 if (fe
->ops
.tuner_ops
.init
) {
331 if (fe
->ops
.i2c_gate_ctrl
)
332 fe
->ops
.i2c_gate_ctrl(fe
, 1);
333 fe
->ops
.tuner_ops
.init(fe
);
334 if (fe
->ops
.i2c_gate_ctrl
)
335 fe
->ops
.i2c_gate_ctrl(fe
, 0);
339 void dvb_frontend_reinitialise(struct dvb_frontend
*fe
)
341 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
343 fepriv
->reinitialise
= 1;
344 dvb_frontend_wakeup(fe
);
346 EXPORT_SYMBOL(dvb_frontend_reinitialise
);
348 static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private
*fepriv
, int locked
)
351 struct dvb_frontend
*fe
= fepriv
->dvbdev
->priv
;
353 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
356 (fepriv
->quality
) = (fepriv
->quality
* 220 + 36 * 256) / 256;
358 (fepriv
->quality
) = (fepriv
->quality
* 220 + 0) / 256;
360 q2
= fepriv
->quality
- 128;
363 fepriv
->delay
= fepriv
->min_delay
+ q2
* HZ
/ (128 * 128);
367 * dvb_frontend_swzigzag_autotune - Performs automatic twiddling of frontend
370 * @fe: The frontend concerned.
371 * @check_wrapped: Checks if an iteration has completed.
372 * DO NOT SET ON THE FIRST ATTEMPT.
374 * return: Number of complete iterations that have been performed.
376 static int dvb_frontend_swzigzag_autotune(struct dvb_frontend
*fe
, int check_wrapped
)
381 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
382 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
, tmp
;
383 int original_inversion
= c
->inversion
;
384 u32 original_frequency
= c
->frequency
;
386 /* are we using autoinversion? */
387 autoinversion
= ((!(fe
->ops
.info
.caps
& FE_CAN_INVERSION_AUTO
)) &&
388 (c
->inversion
== INVERSION_AUTO
));
390 /* setup parameters correctly */
392 /* calculate the lnb_drift */
393 fepriv
->lnb_drift
= fepriv
->auto_step
* fepriv
->step_size
;
395 /* wrap the auto_step if we've exceeded the maximum drift */
396 if (fepriv
->lnb_drift
> fepriv
->max_drift
) {
397 fepriv
->auto_step
= 0;
398 fepriv
->auto_sub_step
= 0;
399 fepriv
->lnb_drift
= 0;
402 /* perform inversion and +/- zigzag */
403 switch (fepriv
->auto_sub_step
) {
405 /* try with the current inversion and current drift setting */
410 if (!autoinversion
) break;
412 fepriv
->inversion
= (fepriv
->inversion
== INVERSION_OFF
) ? INVERSION_ON
: INVERSION_OFF
;
417 if (fepriv
->lnb_drift
== 0) break;
419 fepriv
->lnb_drift
= -fepriv
->lnb_drift
;
424 if (fepriv
->lnb_drift
== 0) break;
425 if (!autoinversion
) break;
427 fepriv
->inversion
= (fepriv
->inversion
== INVERSION_OFF
) ? INVERSION_ON
: INVERSION_OFF
;
428 fepriv
->lnb_drift
= -fepriv
->lnb_drift
;
434 fepriv
->auto_sub_step
= -1; /* it'll be incremented to 0 in a moment */
438 if (!ready
) fepriv
->auto_sub_step
++;
441 /* if this attempt would hit where we started, indicate a complete
442 * iteration has occurred */
443 if ((fepriv
->auto_step
== fepriv
->started_auto_step
) &&
444 (fepriv
->auto_sub_step
== 0) && check_wrapped
) {
448 dev_dbg(fe
->dvb
->device
,
449 "%s: drift:%i inversion:%i auto_step:%i auto_sub_step:%i started_auto_step:%i\n",
450 __func__
, fepriv
->lnb_drift
, fepriv
->inversion
,
451 fepriv
->auto_step
, fepriv
->auto_sub_step
,
452 fepriv
->started_auto_step
);
454 /* set the frontend itself */
455 c
->frequency
+= fepriv
->lnb_drift
;
457 c
->inversion
= fepriv
->inversion
;
459 if (fe
->ops
.set_frontend
)
460 fe_set_err
= fe
->ops
.set_frontend(fe
);
462 if (fe_set_err
< 0) {
463 fepriv
->state
= FESTATE_ERROR
;
467 c
->frequency
= original_frequency
;
468 c
->inversion
= original_inversion
;
470 fepriv
->auto_sub_step
++;
474 static void dvb_frontend_swzigzag(struct dvb_frontend
*fe
)
476 enum fe_status s
= FE_NONE
;
478 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
479 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
, tmp
;
481 /* if we've got no parameters, just keep idling */
482 if (fepriv
->state
& FESTATE_IDLE
) {
483 fepriv
->delay
= 3 * HZ
;
488 /* in SCAN mode, we just set the frontend when asked and leave it alone */
489 if (fepriv
->tune_mode_flags
& FE_TUNE_MODE_ONESHOT
) {
490 if (fepriv
->state
& FESTATE_RETUNE
) {
492 if (fe
->ops
.set_frontend
)
493 retval
= fe
->ops
.set_frontend(fe
);
496 fepriv
->state
= FESTATE_ERROR
;
498 fepriv
->state
= FESTATE_TUNED
;
500 fepriv
->delay
= 3 * HZ
;
505 /* get the frontend status */
506 if (fepriv
->state
& FESTATE_RETUNE
) {
509 if (fe
->ops
.read_status
)
510 fe
->ops
.read_status(fe
, &s
);
511 if (s
!= fepriv
->status
) {
512 dvb_frontend_add_event(fe
, s
);
517 /* if we're not tuned, and we have a lock, move to the TUNED state */
518 if ((fepriv
->state
& FESTATE_WAITFORLOCK
) && (s
& FE_HAS_LOCK
)) {
519 dvb_frontend_swzigzag_update_delay(fepriv
, s
& FE_HAS_LOCK
);
520 fepriv
->state
= FESTATE_TUNED
;
522 /* if we're tuned, then we have determined the correct inversion */
523 if ((!(fe
->ops
.info
.caps
& FE_CAN_INVERSION_AUTO
)) &&
524 (c
->inversion
== INVERSION_AUTO
)) {
525 c
->inversion
= fepriv
->inversion
;
530 /* if we are tuned already, check we're still locked */
531 if (fepriv
->state
& FESTATE_TUNED
) {
532 dvb_frontend_swzigzag_update_delay(fepriv
, s
& FE_HAS_LOCK
);
534 /* we're tuned, and the lock is still good... */
535 if (s
& FE_HAS_LOCK
) {
537 } else { /* if we _WERE_ tuned, but now don't have a lock */
538 fepriv
->state
= FESTATE_ZIGZAG_FAST
;
539 fepriv
->started_auto_step
= fepriv
->auto_step
;
540 fepriv
->check_wrapped
= 0;
544 /* don't actually do anything if we're in the LOSTLOCK state,
545 * the frontend is set to FE_CAN_RECOVER, and the max_drift is 0 */
546 if ((fepriv
->state
& FESTATE_LOSTLOCK
) &&
547 (fe
->ops
.info
.caps
& FE_CAN_RECOVER
) && (fepriv
->max_drift
== 0)) {
548 dvb_frontend_swzigzag_update_delay(fepriv
, s
& FE_HAS_LOCK
);
552 /* don't do anything if we're in the DISEQC state, since this
553 * might be someone with a motorized dish controlled by DISEQC.
554 * If its actually a re-tune, there will be a SET_FRONTEND soon enough. */
555 if (fepriv
->state
& FESTATE_DISEQC
) {
556 dvb_frontend_swzigzag_update_delay(fepriv
, s
& FE_HAS_LOCK
);
560 /* if we're in the RETUNE state, set everything up for a brand
561 * new scan, keeping the current inversion setting, as the next
562 * tune is _very_ likely to require the same */
563 if (fepriv
->state
& FESTATE_RETUNE
) {
564 fepriv
->lnb_drift
= 0;
565 fepriv
->auto_step
= 0;
566 fepriv
->auto_sub_step
= 0;
567 fepriv
->started_auto_step
= 0;
568 fepriv
->check_wrapped
= 0;
572 if ((fepriv
->state
& FESTATE_SEARCHING_FAST
) || (fepriv
->state
& FESTATE_RETUNE
)) {
573 fepriv
->delay
= fepriv
->min_delay
;
576 retval
= dvb_frontend_swzigzag_autotune(fe
,
577 fepriv
->check_wrapped
);
581 /* OK, if we've run out of trials at the fast speed.
582 * Drop back to slow for the _next_ attempt */
583 fepriv
->state
= FESTATE_SEARCHING_SLOW
;
584 fepriv
->started_auto_step
= fepriv
->auto_step
;
587 fepriv
->check_wrapped
= 1;
589 /* if we've just re-tuned, enter the ZIGZAG_FAST state.
590 * This ensures we cannot return from an
591 * FE_SET_FRONTEND ioctl before the first frontend tune
593 if (fepriv
->state
& FESTATE_RETUNE
) {
594 fepriv
->state
= FESTATE_TUNING_FAST
;
599 if (fepriv
->state
& FESTATE_SEARCHING_SLOW
) {
600 dvb_frontend_swzigzag_update_delay(fepriv
, s
& FE_HAS_LOCK
);
602 /* Note: don't bother checking for wrapping; we stay in this
603 * state until we get a lock */
604 dvb_frontend_swzigzag_autotune(fe
, 0);
608 static int dvb_frontend_is_exiting(struct dvb_frontend
*fe
)
610 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
612 if (fe
->exit
!= DVB_FE_NO_EXIT
)
615 if (fepriv
->dvbdev
->writers
== 1)
616 if (time_after_eq(jiffies
, fepriv
->release_jiffies
+
617 dvb_shutdown_timeout
* HZ
))
623 static int dvb_frontend_should_wakeup(struct dvb_frontend
*fe
)
625 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
627 if (fepriv
->wakeup
) {
631 return dvb_frontend_is_exiting(fe
);
634 static void dvb_frontend_wakeup(struct dvb_frontend
*fe
)
636 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
639 wake_up_interruptible(&fepriv
->wait_queue
);
642 static int dvb_frontend_thread(void *data
)
644 struct dvb_frontend
*fe
= data
;
645 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
646 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
647 enum fe_status s
= FE_NONE
;
648 enum dvbfe_algo algo
;
649 bool re_tune
= false;
650 bool semheld
= false;
652 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
654 fepriv
->check_wrapped
= 0;
656 fepriv
->delay
= 3 * HZ
;
659 fepriv
->reinitialise
= 0;
661 dvb_frontend_init(fe
);
665 up(&fepriv
->sem
); /* is locked when we enter the thread... */
667 wait_event_interruptible_timeout(fepriv
->wait_queue
,
668 dvb_frontend_should_wakeup(fe
) ||
669 kthread_should_stop() ||
673 if (kthread_should_stop() || dvb_frontend_is_exiting(fe
)) {
674 /* got signal or quitting */
675 if (!down_interruptible(&fepriv
->sem
))
677 fe
->exit
= DVB_FE_NORMAL_EXIT
;
684 if (down_interruptible(&fepriv
->sem
))
687 if (fepriv
->reinitialise
) {
688 dvb_frontend_init(fe
);
689 if (fe
->ops
.set_tone
&& fepriv
->tone
!= -1)
690 fe
->ops
.set_tone(fe
, fepriv
->tone
);
691 if (fe
->ops
.set_voltage
&& fepriv
->voltage
!= -1)
692 fe
->ops
.set_voltage(fe
, fepriv
->voltage
);
693 fepriv
->reinitialise
= 0;
696 /* do an iteration of the tuning loop */
697 if (fe
->ops
.get_frontend_algo
) {
698 algo
= fe
->ops
.get_frontend_algo(fe
);
701 dev_dbg(fe
->dvb
->device
, "%s: Frontend ALGO = DVBFE_ALGO_HW\n", __func__
);
703 if (fepriv
->state
& FESTATE_RETUNE
) {
704 dev_dbg(fe
->dvb
->device
, "%s: Retune requested, FESTATE_RETUNE\n", __func__
);
706 fepriv
->state
= FESTATE_TUNED
;
712 fe
->ops
.tune(fe
, re_tune
, fepriv
->tune_mode_flags
, &fepriv
->delay
, &s
);
714 if (s
!= fepriv
->status
&& !(fepriv
->tune_mode_flags
& FE_TUNE_MODE_ONESHOT
)) {
715 dev_dbg(fe
->dvb
->device
, "%s: state changed, adding current state\n", __func__
);
716 dvb_frontend_add_event(fe
, s
);
721 dev_dbg(fe
->dvb
->device
, "%s: Frontend ALGO = DVBFE_ALGO_SW\n", __func__
);
722 dvb_frontend_swzigzag(fe
);
724 case DVBFE_ALGO_CUSTOM
:
725 dev_dbg(fe
->dvb
->device
, "%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__
, fepriv
->state
);
726 if (fepriv
->state
& FESTATE_RETUNE
) {
727 dev_dbg(fe
->dvb
->device
, "%s: Retune requested, FESTAT_RETUNE\n", __func__
);
728 fepriv
->state
= FESTATE_TUNED
;
730 /* Case where we are going to search for a carrier
731 * User asked us to retune again for some reason, possibly
732 * requesting a search with a new set of parameters
734 if (fepriv
->algo_status
& DVBFE_ALGO_SEARCH_AGAIN
) {
735 if (fe
->ops
.search
) {
736 fepriv
->algo_status
= fe
->ops
.search(fe
);
737 /* We did do a search as was requested, the flags are
738 * now unset as well and has the flags wrt to search.
741 fepriv
->algo_status
&= ~DVBFE_ALGO_SEARCH_AGAIN
;
744 /* Track the carrier if the search was successful */
745 if (fepriv
->algo_status
!= DVBFE_ALGO_SEARCH_SUCCESS
) {
746 fepriv
->algo_status
|= DVBFE_ALGO_SEARCH_AGAIN
;
747 fepriv
->delay
= HZ
/ 2;
749 dtv_property_legacy_params_sync(fe
, c
, &fepriv
->parameters_out
);
750 fe
->ops
.read_status(fe
, &s
);
751 if (s
!= fepriv
->status
) {
752 dvb_frontend_add_event(fe
, s
); /* update event list */
754 if (!(s
& FE_HAS_LOCK
)) {
755 fepriv
->delay
= HZ
/ 10;
756 fepriv
->algo_status
|= DVBFE_ALGO_SEARCH_AGAIN
;
758 fepriv
->delay
= 60 * HZ
;
763 dev_dbg(fe
->dvb
->device
, "%s: UNDEFINED ALGO !\n", __func__
);
767 dvb_frontend_swzigzag(fe
);
771 if (dvb_powerdown_on_sleep
) {
772 if (fe
->ops
.set_voltage
)
773 fe
->ops
.set_voltage(fe
, SEC_VOLTAGE_OFF
);
774 if (fe
->ops
.tuner_ops
.sleep
) {
775 if (fe
->ops
.i2c_gate_ctrl
)
776 fe
->ops
.i2c_gate_ctrl(fe
, 1);
777 fe
->ops
.tuner_ops
.sleep(fe
);
778 if (fe
->ops
.i2c_gate_ctrl
)
779 fe
->ops
.i2c_gate_ctrl(fe
, 0);
785 fepriv
->thread
= NULL
;
786 if (kthread_should_stop())
787 fe
->exit
= DVB_FE_DEVICE_REMOVED
;
789 fe
->exit
= DVB_FE_NO_EXIT
;
794 dvb_frontend_wakeup(fe
);
798 static void dvb_frontend_stop(struct dvb_frontend
*fe
)
800 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
802 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
804 if (fe
->exit
!= DVB_FE_DEVICE_REMOVED
)
805 fe
->exit
= DVB_FE_NORMAL_EXIT
;
811 kthread_stop(fepriv
->thread
);
813 sema_init(&fepriv
->sem
, 1);
814 fepriv
->state
= FESTATE_IDLE
;
816 /* paranoia check in case a signal arrived */
818 dev_warn(fe
->dvb
->device
,
819 "dvb_frontend_stop: warning: thread %p won't exit\n",
824 * Sleep for the amount of time given by add_usec parameter
826 * This needs to be as precise as possible, as it affects the detection of
827 * the dish tone command at the satellite subsystem. The precision is improved
828 * by using a scheduled msleep followed by udelay for the remainder.
830 void dvb_frontend_sleep_until(ktime_t
*waketime
, u32 add_usec
)
834 *waketime
= ktime_add_us(*waketime
, add_usec
);
835 delta
= ktime_us_delta(ktime_get_boottime(), *waketime
);
837 msleep((delta
- 1500) / 1000);
838 delta
= ktime_us_delta(ktime_get_boottime(), *waketime
);
843 EXPORT_SYMBOL(dvb_frontend_sleep_until
);
845 static int dvb_frontend_start(struct dvb_frontend
*fe
)
848 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
849 struct task_struct
*fe_thread
;
851 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
853 if (fepriv
->thread
) {
854 if (fe
->exit
== DVB_FE_NO_EXIT
)
857 dvb_frontend_stop(fe
);
860 if (signal_pending(current
))
862 if (down_interruptible(&fepriv
->sem
))
865 fepriv
->state
= FESTATE_IDLE
;
866 fe
->exit
= DVB_FE_NO_EXIT
;
867 fepriv
->thread
= NULL
;
870 fe_thread
= kthread_run(dvb_frontend_thread
, fe
,
871 "kdvb-ad-%i-fe-%i", fe
->dvb
->num
, fe
->id
);
872 if (IS_ERR(fe_thread
)) {
873 ret
= PTR_ERR(fe_thread
);
874 dev_warn(fe
->dvb
->device
,
875 "dvb_frontend_start: failed to start kthread (%d)\n",
880 fepriv
->thread
= fe_thread
;
884 static void dvb_frontend_get_frequency_limits(struct dvb_frontend
*fe
,
885 u32
*freq_min
, u32
*freq_max
,
888 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
889 u32 tuner_min
= fe
->ops
.tuner_ops
.info
.frequency_min_hz
;
890 u32 tuner_max
= fe
->ops
.tuner_ops
.info
.frequency_max_hz
;
891 u32 frontend_min
= fe
->ops
.info
.frequency_min_hz
;
892 u32 frontend_max
= fe
->ops
.info
.frequency_max_hz
;
894 *freq_min
= max(frontend_min
, tuner_min
);
896 if (frontend_max
== 0)
897 *freq_max
= tuner_max
;
898 else if (tuner_max
== 0)
899 *freq_max
= frontend_max
;
901 *freq_max
= min(frontend_max
, tuner_max
);
903 if (*freq_min
== 0 || *freq_max
== 0)
904 dev_warn(fe
->dvb
->device
,
905 "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n",
906 fe
->dvb
->num
, fe
->id
);
908 dev_dbg(fe
->dvb
->device
, "frequency interval: tuner: %u...%u, frontend: %u...%u",
909 tuner_min
, tuner_max
, frontend_min
, frontend_max
);
911 /* If the standard is for satellite, convert frequencies to kHz */
912 switch (c
->delivery_system
) {
920 *tolerance
= fe
->ops
.info
.frequency_tolerance_hz
/ kHz
;
925 *tolerance
= fe
->ops
.info
.frequency_tolerance_hz
;
930 static u32
dvb_frontend_get_stepsize(struct dvb_frontend
*fe
)
932 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
933 u32 fe_step
= fe
->ops
.info
.frequency_stepsize_hz
;
934 u32 tuner_step
= fe
->ops
.tuner_ops
.info
.frequency_step_hz
;
935 u32 step
= max(fe_step
, tuner_step
);
937 switch (c
->delivery_system
) {
951 static int dvb_frontend_check_parameters(struct dvb_frontend
*fe
)
953 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
957 /* range check: frequency */
958 dvb_frontend_get_frequency_limits(fe
, &freq_min
, &freq_max
, NULL
);
959 if ((freq_min
&& c
->frequency
< freq_min
) ||
960 (freq_max
&& c
->frequency
> freq_max
)) {
961 dev_warn(fe
->dvb
->device
, "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n",
962 fe
->dvb
->num
, fe
->id
, c
->frequency
,
967 /* range check: symbol rate */
968 switch (c
->delivery_system
) {
972 case SYS_DVBC_ANNEX_A
:
973 case SYS_DVBC_ANNEX_C
:
974 if ((fe
->ops
.info
.symbol_rate_min
&&
975 c
->symbol_rate
< fe
->ops
.info
.symbol_rate_min
) ||
976 (fe
->ops
.info
.symbol_rate_max
&&
977 c
->symbol_rate
> fe
->ops
.info
.symbol_rate_max
)) {
978 dev_warn(fe
->dvb
->device
, "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n",
979 fe
->dvb
->num
, fe
->id
, c
->symbol_rate
,
980 fe
->ops
.info
.symbol_rate_min
,
981 fe
->ops
.info
.symbol_rate_max
);
991 static int dvb_frontend_clear_cache(struct dvb_frontend
*fe
)
993 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
997 delsys
= c
->delivery_system
;
998 memset(c
, 0, offsetof(struct dtv_frontend_properties
, strength
));
999 c
->delivery_system
= delsys
;
1001 dev_dbg(fe
->dvb
->device
, "%s: Clearing cache for delivery system %d\n",
1002 __func__
, c
->delivery_system
);
1004 c
->transmission_mode
= TRANSMISSION_MODE_AUTO
;
1005 c
->bandwidth_hz
= 0; /* AUTO */
1006 c
->guard_interval
= GUARD_INTERVAL_AUTO
;
1007 c
->hierarchy
= HIERARCHY_AUTO
;
1009 c
->code_rate_HP
= FEC_AUTO
;
1010 c
->code_rate_LP
= FEC_AUTO
;
1011 c
->fec_inner
= FEC_AUTO
;
1012 c
->rolloff
= ROLLOFF_AUTO
;
1013 c
->voltage
= SEC_VOLTAGE_OFF
;
1014 c
->sectone
= SEC_TONE_OFF
;
1015 c
->pilot
= PILOT_AUTO
;
1017 c
->isdbt_partial_reception
= 0;
1018 c
->isdbt_sb_mode
= 0;
1019 c
->isdbt_sb_subchannel
= 0;
1020 c
->isdbt_sb_segment_idx
= 0;
1021 c
->isdbt_sb_segment_count
= 0;
1022 c
->isdbt_layer_enabled
= 7; /* All layers (A,B,C) */
1023 for (i
= 0; i
< 3; i
++) {
1024 c
->layer
[i
].fec
= FEC_AUTO
;
1025 c
->layer
[i
].modulation
= QAM_AUTO
;
1026 c
->layer
[i
].interleaving
= 0;
1027 c
->layer
[i
].segment_count
= 0;
1030 c
->stream_id
= NO_STREAM_ID_FILTER
;
1031 c
->scrambling_sequence_index
= 0;/* default sequence */
1033 switch (c
->delivery_system
) {
1037 c
->modulation
= QPSK
; /* implied for DVB-S in legacy API */
1038 c
->rolloff
= ROLLOFF_35
;/* implied for DVB-S */
1041 c
->modulation
= VSB_8
;
1044 c
->symbol_rate
= 28860000;
1045 c
->rolloff
= ROLLOFF_35
;
1046 c
->bandwidth_hz
= c
->symbol_rate
/ 100 * 135;
1049 c
->modulation
= QAM_AUTO
;
1058 #define _DTV_CMD(n, s, b) \
1067 char *name
; /* A display name for debugging purposes */
1069 __u32 cmd
; /* A unique ID */
1072 __u32 set
:1; /* Either a set or get property */
1073 __u32 buffer
:1; /* Does this property use the buffer? */
1074 __u32 reserved
:30; /* Align */
1077 static struct dtv_cmds_h dtv_cmds
[DTV_MAX_COMMAND
+ 1] = {
1078 _DTV_CMD(DTV_TUNE
, 1, 0),
1079 _DTV_CMD(DTV_CLEAR
, 1, 0),
1082 _DTV_CMD(DTV_FREQUENCY
, 1, 0),
1083 _DTV_CMD(DTV_BANDWIDTH_HZ
, 1, 0),
1084 _DTV_CMD(DTV_MODULATION
, 1, 0),
1085 _DTV_CMD(DTV_INVERSION
, 1, 0),
1086 _DTV_CMD(DTV_DISEQC_MASTER
, 1, 1),
1087 _DTV_CMD(DTV_SYMBOL_RATE
, 1, 0),
1088 _DTV_CMD(DTV_INNER_FEC
, 1, 0),
1089 _DTV_CMD(DTV_VOLTAGE
, 1, 0),
1090 _DTV_CMD(DTV_TONE
, 1, 0),
1091 _DTV_CMD(DTV_PILOT
, 1, 0),
1092 _DTV_CMD(DTV_ROLLOFF
, 1, 0),
1093 _DTV_CMD(DTV_DELIVERY_SYSTEM
, 1, 0),
1094 _DTV_CMD(DTV_HIERARCHY
, 1, 0),
1095 _DTV_CMD(DTV_CODE_RATE_HP
, 1, 0),
1096 _DTV_CMD(DTV_CODE_RATE_LP
, 1, 0),
1097 _DTV_CMD(DTV_GUARD_INTERVAL
, 1, 0),
1098 _DTV_CMD(DTV_TRANSMISSION_MODE
, 1, 0),
1099 _DTV_CMD(DTV_INTERLEAVING
, 1, 0),
1101 _DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION
, 1, 0),
1102 _DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING
, 1, 0),
1103 _DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID
, 1, 0),
1104 _DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX
, 1, 0),
1105 _DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT
, 1, 0),
1106 _DTV_CMD(DTV_ISDBT_LAYER_ENABLED
, 1, 0),
1107 _DTV_CMD(DTV_ISDBT_LAYERA_FEC
, 1, 0),
1108 _DTV_CMD(DTV_ISDBT_LAYERA_MODULATION
, 1, 0),
1109 _DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT
, 1, 0),
1110 _DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING
, 1, 0),
1111 _DTV_CMD(DTV_ISDBT_LAYERB_FEC
, 1, 0),
1112 _DTV_CMD(DTV_ISDBT_LAYERB_MODULATION
, 1, 0),
1113 _DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT
, 1, 0),
1114 _DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING
, 1, 0),
1115 _DTV_CMD(DTV_ISDBT_LAYERC_FEC
, 1, 0),
1116 _DTV_CMD(DTV_ISDBT_LAYERC_MODULATION
, 1, 0),
1117 _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT
, 1, 0),
1118 _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING
, 1, 0),
1120 _DTV_CMD(DTV_STREAM_ID
, 1, 0),
1121 _DTV_CMD(DTV_DVBT2_PLP_ID_LEGACY
, 1, 0),
1122 _DTV_CMD(DTV_SCRAMBLING_SEQUENCE_INDEX
, 1, 0),
1123 _DTV_CMD(DTV_LNA
, 1, 0),
1126 _DTV_CMD(DTV_DISEQC_SLAVE_REPLY
, 0, 1),
1127 _DTV_CMD(DTV_API_VERSION
, 0, 0),
1129 _DTV_CMD(DTV_ENUM_DELSYS
, 0, 0),
1131 _DTV_CMD(DTV_ATSCMH_PARADE_ID
, 1, 0),
1132 _DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE
, 1, 0),
1134 _DTV_CMD(DTV_ATSCMH_FIC_VER
, 0, 0),
1135 _DTV_CMD(DTV_ATSCMH_NOG
, 0, 0),
1136 _DTV_CMD(DTV_ATSCMH_TNOG
, 0, 0),
1137 _DTV_CMD(DTV_ATSCMH_SGN
, 0, 0),
1138 _DTV_CMD(DTV_ATSCMH_PRC
, 0, 0),
1139 _DTV_CMD(DTV_ATSCMH_RS_FRAME_MODE
, 0, 0),
1140 _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_PRI
, 0, 0),
1141 _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_SEC
, 0, 0),
1142 _DTV_CMD(DTV_ATSCMH_SCCC_BLOCK_MODE
, 0, 0),
1143 _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_A
, 0, 0),
1144 _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_B
, 0, 0),
1145 _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_C
, 0, 0),
1146 _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D
, 0, 0),
1148 /* Statistics API */
1149 _DTV_CMD(DTV_STAT_SIGNAL_STRENGTH
, 0, 0),
1150 _DTV_CMD(DTV_STAT_CNR
, 0, 0),
1151 _DTV_CMD(DTV_STAT_PRE_ERROR_BIT_COUNT
, 0, 0),
1152 _DTV_CMD(DTV_STAT_PRE_TOTAL_BIT_COUNT
, 0, 0),
1153 _DTV_CMD(DTV_STAT_POST_ERROR_BIT_COUNT
, 0, 0),
1154 _DTV_CMD(DTV_STAT_POST_TOTAL_BIT_COUNT
, 0, 0),
1155 _DTV_CMD(DTV_STAT_ERROR_BLOCK_COUNT
, 0, 0),
1156 _DTV_CMD(DTV_STAT_TOTAL_BLOCK_COUNT
, 0, 0),
1159 /* Synchronise the legacy tuning parameters into the cache, so that demodulator
1160 * drivers can use a single set_frontend tuning function, regardless of whether
1161 * it's being used for the legacy or new API, reducing code and complexity.
1163 static int dtv_property_cache_sync(struct dvb_frontend
*fe
,
1164 struct dtv_frontend_properties
*c
,
1165 const struct dvb_frontend_parameters
*p
)
1167 c
->frequency
= p
->frequency
;
1168 c
->inversion
= p
->inversion
;
1170 switch (dvbv3_type(c
->delivery_system
)) {
1172 dev_dbg(fe
->dvb
->device
, "%s: Preparing QPSK req\n", __func__
);
1173 c
->symbol_rate
= p
->u
.qpsk
.symbol_rate
;
1174 c
->fec_inner
= p
->u
.qpsk
.fec_inner
;
1177 dev_dbg(fe
->dvb
->device
, "%s: Preparing QAM req\n", __func__
);
1178 c
->symbol_rate
= p
->u
.qam
.symbol_rate
;
1179 c
->fec_inner
= p
->u
.qam
.fec_inner
;
1180 c
->modulation
= p
->u
.qam
.modulation
;
1183 dev_dbg(fe
->dvb
->device
, "%s: Preparing OFDM req\n", __func__
);
1185 switch (p
->u
.ofdm
.bandwidth
) {
1186 case BANDWIDTH_10_MHZ
:
1187 c
->bandwidth_hz
= 10000000;
1189 case BANDWIDTH_8_MHZ
:
1190 c
->bandwidth_hz
= 8000000;
1192 case BANDWIDTH_7_MHZ
:
1193 c
->bandwidth_hz
= 7000000;
1195 case BANDWIDTH_6_MHZ
:
1196 c
->bandwidth_hz
= 6000000;
1198 case BANDWIDTH_5_MHZ
:
1199 c
->bandwidth_hz
= 5000000;
1201 case BANDWIDTH_1_712_MHZ
:
1202 c
->bandwidth_hz
= 1712000;
1204 case BANDWIDTH_AUTO
:
1205 c
->bandwidth_hz
= 0;
1208 c
->code_rate_HP
= p
->u
.ofdm
.code_rate_HP
;
1209 c
->code_rate_LP
= p
->u
.ofdm
.code_rate_LP
;
1210 c
->modulation
= p
->u
.ofdm
.constellation
;
1211 c
->transmission_mode
= p
->u
.ofdm
.transmission_mode
;
1212 c
->guard_interval
= p
->u
.ofdm
.guard_interval
;
1213 c
->hierarchy
= p
->u
.ofdm
.hierarchy_information
;
1216 dev_dbg(fe
->dvb
->device
, "%s: Preparing ATSC req\n", __func__
);
1217 c
->modulation
= p
->u
.vsb
.modulation
;
1218 if (c
->delivery_system
== SYS_ATSCMH
)
1220 if ((c
->modulation
== VSB_8
) || (c
->modulation
== VSB_16
))
1221 c
->delivery_system
= SYS_ATSC
;
1223 c
->delivery_system
= SYS_DVBC_ANNEX_B
;
1226 dev_err(fe
->dvb
->device
,
1227 "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n",
1228 __func__
, c
->delivery_system
);
1235 /* Ensure the cached values are set correctly in the frontend
1236 * legacy tuning structures, for the advanced tuning API.
1239 dtv_property_legacy_params_sync(struct dvb_frontend
*fe
,
1240 const struct dtv_frontend_properties
*c
,
1241 struct dvb_frontend_parameters
*p
)
1243 p
->frequency
= c
->frequency
;
1244 p
->inversion
= c
->inversion
;
1246 switch (dvbv3_type(c
->delivery_system
)) {
1248 dev_err(fe
->dvb
->device
,
1249 "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n",
1250 __func__
, c
->delivery_system
);
1253 dev_dbg(fe
->dvb
->device
, "%s: Preparing QPSK req\n", __func__
);
1254 p
->u
.qpsk
.symbol_rate
= c
->symbol_rate
;
1255 p
->u
.qpsk
.fec_inner
= c
->fec_inner
;
1258 dev_dbg(fe
->dvb
->device
, "%s: Preparing QAM req\n", __func__
);
1259 p
->u
.qam
.symbol_rate
= c
->symbol_rate
;
1260 p
->u
.qam
.fec_inner
= c
->fec_inner
;
1261 p
->u
.qam
.modulation
= c
->modulation
;
1264 dev_dbg(fe
->dvb
->device
, "%s: Preparing OFDM req\n", __func__
);
1265 switch (c
->bandwidth_hz
) {
1267 p
->u
.ofdm
.bandwidth
= BANDWIDTH_10_MHZ
;
1270 p
->u
.ofdm
.bandwidth
= BANDWIDTH_8_MHZ
;
1273 p
->u
.ofdm
.bandwidth
= BANDWIDTH_7_MHZ
;
1276 p
->u
.ofdm
.bandwidth
= BANDWIDTH_6_MHZ
;
1279 p
->u
.ofdm
.bandwidth
= BANDWIDTH_5_MHZ
;
1282 p
->u
.ofdm
.bandwidth
= BANDWIDTH_1_712_MHZ
;
1286 p
->u
.ofdm
.bandwidth
= BANDWIDTH_AUTO
;
1288 p
->u
.ofdm
.code_rate_HP
= c
->code_rate_HP
;
1289 p
->u
.ofdm
.code_rate_LP
= c
->code_rate_LP
;
1290 p
->u
.ofdm
.constellation
= c
->modulation
;
1291 p
->u
.ofdm
.transmission_mode
= c
->transmission_mode
;
1292 p
->u
.ofdm
.guard_interval
= c
->guard_interval
;
1293 p
->u
.ofdm
.hierarchy_information
= c
->hierarchy
;
1296 dev_dbg(fe
->dvb
->device
, "%s: Preparing VSB req\n", __func__
);
1297 p
->u
.vsb
.modulation
= c
->modulation
;
1304 * dtv_get_frontend - calls a callback for retrieving DTV parameters
1305 * @fe: struct dvb_frontend pointer
1306 * @c: struct dtv_frontend_properties pointer (DVBv5 cache)
1307 * @p_out: struct dvb_frontend_parameters pointer (DVBv3 FE struct)
1309 * This routine calls either the DVBv3 or DVBv5 get_frontend call.
1310 * If c is not null, it will update the DVBv5 cache struct pointed by it.
1311 * If p_out is not null, it will update the DVBv3 params pointed by it.
1313 static int dtv_get_frontend(struct dvb_frontend
*fe
,
1314 struct dtv_frontend_properties
*c
,
1315 struct dvb_frontend_parameters
*p_out
)
1319 if (fe
->ops
.get_frontend
) {
1320 r
= fe
->ops
.get_frontend(fe
, c
);
1321 if (unlikely(r
< 0))
1324 dtv_property_legacy_params_sync(fe
, c
, p_out
);
1328 /* As everything is in cache, get_frontend fops are always supported */
1332 static int dvb_frontend_handle_ioctl(struct file
*file
,
1333 unsigned int cmd
, void *parg
);
1335 static int dtv_property_process_get(struct dvb_frontend
*fe
,
1336 const struct dtv_frontend_properties
*c
,
1337 struct dtv_property
*tvp
,
1343 case DTV_ENUM_DELSYS
:
1345 while (ncaps
< MAX_DELSYS
&& fe
->ops
.delsys
[ncaps
]) {
1346 tvp
->u
.buffer
.data
[ncaps
] = fe
->ops
.delsys
[ncaps
];
1349 tvp
->u
.buffer
.len
= ncaps
;
1352 tvp
->u
.data
= c
->frequency
;
1354 case DTV_MODULATION
:
1355 tvp
->u
.data
= c
->modulation
;
1357 case DTV_BANDWIDTH_HZ
:
1358 tvp
->u
.data
= c
->bandwidth_hz
;
1361 tvp
->u
.data
= c
->inversion
;
1363 case DTV_SYMBOL_RATE
:
1364 tvp
->u
.data
= c
->symbol_rate
;
1367 tvp
->u
.data
= c
->fec_inner
;
1370 tvp
->u
.data
= c
->pilot
;
1373 tvp
->u
.data
= c
->rolloff
;
1375 case DTV_DELIVERY_SYSTEM
:
1376 tvp
->u
.data
= c
->delivery_system
;
1379 tvp
->u
.data
= c
->voltage
;
1382 tvp
->u
.data
= c
->sectone
;
1384 case DTV_API_VERSION
:
1385 tvp
->u
.data
= (DVB_API_VERSION
<< 8) | DVB_API_VERSION_MINOR
;
1387 case DTV_CODE_RATE_HP
:
1388 tvp
->u
.data
= c
->code_rate_HP
;
1390 case DTV_CODE_RATE_LP
:
1391 tvp
->u
.data
= c
->code_rate_LP
;
1393 case DTV_GUARD_INTERVAL
:
1394 tvp
->u
.data
= c
->guard_interval
;
1396 case DTV_TRANSMISSION_MODE
:
1397 tvp
->u
.data
= c
->transmission_mode
;
1400 tvp
->u
.data
= c
->hierarchy
;
1402 case DTV_INTERLEAVING
:
1403 tvp
->u
.data
= c
->interleaving
;
1406 /* ISDB-T Support here */
1407 case DTV_ISDBT_PARTIAL_RECEPTION
:
1408 tvp
->u
.data
= c
->isdbt_partial_reception
;
1410 case DTV_ISDBT_SOUND_BROADCASTING
:
1411 tvp
->u
.data
= c
->isdbt_sb_mode
;
1413 case DTV_ISDBT_SB_SUBCHANNEL_ID
:
1414 tvp
->u
.data
= c
->isdbt_sb_subchannel
;
1416 case DTV_ISDBT_SB_SEGMENT_IDX
:
1417 tvp
->u
.data
= c
->isdbt_sb_segment_idx
;
1419 case DTV_ISDBT_SB_SEGMENT_COUNT
:
1420 tvp
->u
.data
= c
->isdbt_sb_segment_count
;
1422 case DTV_ISDBT_LAYER_ENABLED
:
1423 tvp
->u
.data
= c
->isdbt_layer_enabled
;
1425 case DTV_ISDBT_LAYERA_FEC
:
1426 tvp
->u
.data
= c
->layer
[0].fec
;
1428 case DTV_ISDBT_LAYERA_MODULATION
:
1429 tvp
->u
.data
= c
->layer
[0].modulation
;
1431 case DTV_ISDBT_LAYERA_SEGMENT_COUNT
:
1432 tvp
->u
.data
= c
->layer
[0].segment_count
;
1434 case DTV_ISDBT_LAYERA_TIME_INTERLEAVING
:
1435 tvp
->u
.data
= c
->layer
[0].interleaving
;
1437 case DTV_ISDBT_LAYERB_FEC
:
1438 tvp
->u
.data
= c
->layer
[1].fec
;
1440 case DTV_ISDBT_LAYERB_MODULATION
:
1441 tvp
->u
.data
= c
->layer
[1].modulation
;
1443 case DTV_ISDBT_LAYERB_SEGMENT_COUNT
:
1444 tvp
->u
.data
= c
->layer
[1].segment_count
;
1446 case DTV_ISDBT_LAYERB_TIME_INTERLEAVING
:
1447 tvp
->u
.data
= c
->layer
[1].interleaving
;
1449 case DTV_ISDBT_LAYERC_FEC
:
1450 tvp
->u
.data
= c
->layer
[2].fec
;
1452 case DTV_ISDBT_LAYERC_MODULATION
:
1453 tvp
->u
.data
= c
->layer
[2].modulation
;
1455 case DTV_ISDBT_LAYERC_SEGMENT_COUNT
:
1456 tvp
->u
.data
= c
->layer
[2].segment_count
;
1458 case DTV_ISDBT_LAYERC_TIME_INTERLEAVING
:
1459 tvp
->u
.data
= c
->layer
[2].interleaving
;
1462 /* Multistream support */
1464 case DTV_DVBT2_PLP_ID_LEGACY
:
1465 tvp
->u
.data
= c
->stream_id
;
1468 /* Physical layer scrambling support */
1469 case DTV_SCRAMBLING_SEQUENCE_INDEX
:
1470 tvp
->u
.data
= c
->scrambling_sequence_index
;
1474 case DTV_ATSCMH_FIC_VER
:
1475 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_fic_ver
;
1477 case DTV_ATSCMH_PARADE_ID
:
1478 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_parade_id
;
1480 case DTV_ATSCMH_NOG
:
1481 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_nog
;
1483 case DTV_ATSCMH_TNOG
:
1484 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_tnog
;
1486 case DTV_ATSCMH_SGN
:
1487 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_sgn
;
1489 case DTV_ATSCMH_PRC
:
1490 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_prc
;
1492 case DTV_ATSCMH_RS_FRAME_MODE
:
1493 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_rs_frame_mode
;
1495 case DTV_ATSCMH_RS_FRAME_ENSEMBLE
:
1496 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_rs_frame_ensemble
;
1498 case DTV_ATSCMH_RS_CODE_MODE_PRI
:
1499 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_rs_code_mode_pri
;
1501 case DTV_ATSCMH_RS_CODE_MODE_SEC
:
1502 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_rs_code_mode_sec
;
1504 case DTV_ATSCMH_SCCC_BLOCK_MODE
:
1505 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_sccc_block_mode
;
1507 case DTV_ATSCMH_SCCC_CODE_MODE_A
:
1508 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_sccc_code_mode_a
;
1510 case DTV_ATSCMH_SCCC_CODE_MODE_B
:
1511 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_sccc_code_mode_b
;
1513 case DTV_ATSCMH_SCCC_CODE_MODE_C
:
1514 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_sccc_code_mode_c
;
1516 case DTV_ATSCMH_SCCC_CODE_MODE_D
:
1517 tvp
->u
.data
= fe
->dtv_property_cache
.atscmh_sccc_code_mode_d
;
1521 tvp
->u
.data
= c
->lna
;
1524 /* Fill quality measures */
1525 case DTV_STAT_SIGNAL_STRENGTH
:
1526 tvp
->u
.st
= c
->strength
;
1531 case DTV_STAT_PRE_ERROR_BIT_COUNT
:
1532 tvp
->u
.st
= c
->pre_bit_error
;
1534 case DTV_STAT_PRE_TOTAL_BIT_COUNT
:
1535 tvp
->u
.st
= c
->pre_bit_count
;
1537 case DTV_STAT_POST_ERROR_BIT_COUNT
:
1538 tvp
->u
.st
= c
->post_bit_error
;
1540 case DTV_STAT_POST_TOTAL_BIT_COUNT
:
1541 tvp
->u
.st
= c
->post_bit_count
;
1543 case DTV_STAT_ERROR_BLOCK_COUNT
:
1544 tvp
->u
.st
= c
->block_error
;
1546 case DTV_STAT_TOTAL_BLOCK_COUNT
:
1547 tvp
->u
.st
= c
->block_count
;
1550 dev_dbg(fe
->dvb
->device
,
1551 "%s: FE property %d doesn't exist\n",
1552 __func__
, tvp
->cmd
);
1556 if (!dtv_cmds
[tvp
->cmd
].buffer
)
1557 dev_dbg(fe
->dvb
->device
,
1558 "%s: GET cmd 0x%08x (%s) = 0x%08x\n",
1559 __func__
, tvp
->cmd
, dtv_cmds
[tvp
->cmd
].name
,
1562 dev_dbg(fe
->dvb
->device
,
1563 "%s: GET cmd 0x%08x (%s) len %d: %*ph\n",
1565 tvp
->cmd
, dtv_cmds
[tvp
->cmd
].name
,
1567 tvp
->u
.buffer
.len
, tvp
->u
.buffer
.data
);
1572 static int dtv_set_frontend(struct dvb_frontend
*fe
);
1574 static bool is_dvbv3_delsys(u32 delsys
)
1576 return (delsys
== SYS_DVBT
) || (delsys
== SYS_DVBC_ANNEX_A
) ||
1577 (delsys
== SYS_DVBS
) || (delsys
== SYS_ATSC
);
1581 * emulate_delivery_system - emulate a DVBv5 delivery system with a DVBv3 type
1582 * @fe: struct frontend;
1583 * @delsys: DVBv5 type that will be used for emulation
1585 * Provides emulation for delivery systems that are compatible with the old
1586 * DVBv3 call. Among its usages, it provices support for ISDB-T, and allows
1587 * using a DVB-S2 only frontend just like it were a DVB-S, if the frontend
1588 * parameters are compatible with DVB-S spec.
1590 static int emulate_delivery_system(struct dvb_frontend
*fe
, u32 delsys
)
1593 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
1595 c
->delivery_system
= delsys
;
1598 * If the call is for ISDB-T, put it into full-seg, auto mode, TV
1600 if (c
->delivery_system
== SYS_ISDBT
) {
1601 dev_dbg(fe
->dvb
->device
,
1602 "%s: Using defaults for SYS_ISDBT\n",
1605 if (!c
->bandwidth_hz
)
1606 c
->bandwidth_hz
= 6000000;
1608 c
->isdbt_partial_reception
= 0;
1609 c
->isdbt_sb_mode
= 0;
1610 c
->isdbt_sb_subchannel
= 0;
1611 c
->isdbt_sb_segment_idx
= 0;
1612 c
->isdbt_sb_segment_count
= 0;
1613 c
->isdbt_layer_enabled
= 7;
1614 for (i
= 0; i
< 3; i
++) {
1615 c
->layer
[i
].fec
= FEC_AUTO
;
1616 c
->layer
[i
].modulation
= QAM_AUTO
;
1617 c
->layer
[i
].interleaving
= 0;
1618 c
->layer
[i
].segment_count
= 0;
1621 dev_dbg(fe
->dvb
->device
, "%s: change delivery system on cache to %d\n",
1622 __func__
, c
->delivery_system
);
1628 * dvbv5_set_delivery_system - Sets the delivery system for a DVBv5 API call
1629 * @fe: frontend struct
1630 * @desired_system: delivery system requested by the user
1632 * A DVBv5 call know what's the desired system it wants. So, set it.
1634 * There are, however, a few known issues with early DVBv5 applications that
1635 * are also handled by this logic:
1637 * 1) Some early apps use SYS_UNDEFINED as the desired delivery system.
1638 * This is an API violation, but, as we don't want to break userspace,
1639 * convert it to the first supported delivery system.
1640 * 2) Some apps might be using a DVBv5 call in a wrong way, passing, for
1641 * example, SYS_DVBT instead of SYS_ISDBT. This is because early usage of
1642 * ISDB-T provided backward compat with DVB-T.
1644 static int dvbv5_set_delivery_system(struct dvb_frontend
*fe
,
1648 u32 delsys
= SYS_UNDEFINED
;
1649 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
1650 enum dvbv3_emulation_type type
;
1653 * It was reported that some old DVBv5 applications were
1654 * filling delivery_system with SYS_UNDEFINED. If this happens,
1655 * assume that the application wants to use the first supported
1658 if (desired_system
== SYS_UNDEFINED
)
1659 desired_system
= fe
->ops
.delsys
[0];
1662 * This is a DVBv5 call. So, it likely knows the supported
1663 * delivery systems. So, check if the desired delivery system is
1667 while (ncaps
< MAX_DELSYS
&& fe
->ops
.delsys
[ncaps
]) {
1668 if (fe
->ops
.delsys
[ncaps
] == desired_system
) {
1669 c
->delivery_system
= desired_system
;
1670 dev_dbg(fe
->dvb
->device
,
1671 "%s: Changing delivery system to %d\n",
1672 __func__
, desired_system
);
1679 * The requested delivery system isn't supported. Maybe userspace
1680 * is requesting a DVBv3 compatible delivery system.
1682 * The emulation only works if the desired system is one of the
1683 * delivery systems supported by DVBv3 API
1685 if (!is_dvbv3_delsys(desired_system
)) {
1686 dev_dbg(fe
->dvb
->device
,
1687 "%s: Delivery system %d not supported.\n",
1688 __func__
, desired_system
);
1692 type
= dvbv3_type(desired_system
);
1695 * Get the last non-DVBv3 delivery system that has the same type
1696 * of the desired system
1699 while (ncaps
< MAX_DELSYS
&& fe
->ops
.delsys
[ncaps
]) {
1700 if (dvbv3_type(fe
->ops
.delsys
[ncaps
]) == type
)
1701 delsys
= fe
->ops
.delsys
[ncaps
];
1705 /* There's nothing compatible with the desired delivery system */
1706 if (delsys
== SYS_UNDEFINED
) {
1707 dev_dbg(fe
->dvb
->device
,
1708 "%s: Delivery system %d not supported on emulation mode.\n",
1709 __func__
, desired_system
);
1713 dev_dbg(fe
->dvb
->device
,
1714 "%s: Using delivery system %d emulated as if it were %d\n",
1715 __func__
, delsys
, desired_system
);
1717 return emulate_delivery_system(fe
, desired_system
);
1721 * dvbv3_set_delivery_system - Sets the delivery system for a DVBv3 API call
1722 * @fe: frontend struct
1724 * A DVBv3 call doesn't know what's the desired system it wants. It also
1725 * doesn't allow to switch between different types. Due to that, userspace
1726 * should use DVBv5 instead.
1727 * However, in order to avoid breaking userspace API, limited backward
1728 * compatibility support is provided.
1730 * There are some delivery systems that are incompatible with DVBv3 calls.
1732 * This routine should work fine for frontends that support just one delivery
1735 * For frontends that support multiple frontends:
1736 * 1) It defaults to use the first supported delivery system. There's an
1737 * userspace application that allows changing it at runtime;
1739 * 2) If the current delivery system is not compatible with DVBv3, it gets
1740 * the first one that it is compatible.
1742 * NOTE: in order for this to work with applications like Kaffeine that
1743 * uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to
1744 * DVB-S, drivers that support both DVB-S and DVB-S2 should have the
1745 * SYS_DVBS entry before the SYS_DVBS2, otherwise it won't switch back
1748 static int dvbv3_set_delivery_system(struct dvb_frontend
*fe
)
1751 u32 delsys
= SYS_UNDEFINED
;
1752 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
1754 /* If not set yet, defaults to the first supported delivery system */
1755 if (c
->delivery_system
== SYS_UNDEFINED
)
1756 c
->delivery_system
= fe
->ops
.delsys
[0];
1759 * Trivial case: just use the current one, if it already a DVBv3
1762 if (is_dvbv3_delsys(c
->delivery_system
)) {
1763 dev_dbg(fe
->dvb
->device
,
1764 "%s: Using delivery system to %d\n",
1765 __func__
, c
->delivery_system
);
1770 * Seek for the first delivery system that it is compatible with a
1774 while (ncaps
< MAX_DELSYS
&& fe
->ops
.delsys
[ncaps
]) {
1775 if (dvbv3_type(fe
->ops
.delsys
[ncaps
]) != DVBV3_UNKNOWN
) {
1776 delsys
= fe
->ops
.delsys
[ncaps
];
1781 if (delsys
== SYS_UNDEFINED
) {
1782 dev_dbg(fe
->dvb
->device
,
1783 "%s: Couldn't find a delivery system that works with FE_SET_FRONTEND\n",
1787 return emulate_delivery_system(fe
, delsys
);
1791 * dtv_property_process_set - Sets a single DTV property
1792 * @fe: Pointer to &struct dvb_frontend
1793 * @file: Pointer to &struct file
1794 * @cmd: Digital TV command
1795 * @data: An unsigned 32-bits number
1797 * This routine assigns the property
1798 * value to the corresponding member of
1799 * &struct dtv_frontend_properties
1802 * Zero on success, negative errno on failure.
1804 static int dtv_property_process_set(struct dvb_frontend
*fe
,
1809 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
1811 /** Dump DTV command name and value*/
1812 if (!cmd
|| cmd
> DTV_MAX_COMMAND
)
1813 dev_warn(fe
->dvb
->device
, "%s: SET cmd 0x%08x undefined\n",
1816 dev_dbg(fe
->dvb
->device
,
1817 "%s: SET cmd 0x%08x (%s) to 0x%08x\n",
1818 __func__
, cmd
, dtv_cmds
[cmd
].name
, data
);
1822 * Reset a cache of data specific to the frontend here. This does
1823 * not effect hardware.
1825 dvb_frontend_clear_cache(fe
);
1829 * Use the cached Digital TV properties to tune the
1832 dev_dbg(fe
->dvb
->device
,
1833 "%s: Setting the frontend from property cache\n",
1836 r
= dtv_set_frontend(fe
);
1839 c
->frequency
= data
;
1841 case DTV_MODULATION
:
1842 c
->modulation
= data
;
1844 case DTV_BANDWIDTH_HZ
:
1845 c
->bandwidth_hz
= data
;
1848 c
->inversion
= data
;
1850 case DTV_SYMBOL_RATE
:
1851 c
->symbol_rate
= data
;
1854 c
->fec_inner
= data
;
1862 case DTV_DELIVERY_SYSTEM
:
1863 r
= dvbv5_set_delivery_system(fe
, data
);
1867 r
= dvb_frontend_handle_ioctl(file
, FE_SET_VOLTAGE
,
1868 (void *)c
->voltage
);
1872 r
= dvb_frontend_handle_ioctl(file
, FE_SET_TONE
,
1873 (void *)c
->sectone
);
1875 case DTV_CODE_RATE_HP
:
1876 c
->code_rate_HP
= data
;
1878 case DTV_CODE_RATE_LP
:
1879 c
->code_rate_LP
= data
;
1881 case DTV_GUARD_INTERVAL
:
1882 c
->guard_interval
= data
;
1884 case DTV_TRANSMISSION_MODE
:
1885 c
->transmission_mode
= data
;
1888 c
->hierarchy
= data
;
1890 case DTV_INTERLEAVING
:
1891 c
->interleaving
= data
;
1894 /* ISDB-T Support here */
1895 case DTV_ISDBT_PARTIAL_RECEPTION
:
1896 c
->isdbt_partial_reception
= data
;
1898 case DTV_ISDBT_SOUND_BROADCASTING
:
1899 c
->isdbt_sb_mode
= data
;
1901 case DTV_ISDBT_SB_SUBCHANNEL_ID
:
1902 c
->isdbt_sb_subchannel
= data
;
1904 case DTV_ISDBT_SB_SEGMENT_IDX
:
1905 c
->isdbt_sb_segment_idx
= data
;
1907 case DTV_ISDBT_SB_SEGMENT_COUNT
:
1908 c
->isdbt_sb_segment_count
= data
;
1910 case DTV_ISDBT_LAYER_ENABLED
:
1911 c
->isdbt_layer_enabled
= data
;
1913 case DTV_ISDBT_LAYERA_FEC
:
1914 c
->layer
[0].fec
= data
;
1916 case DTV_ISDBT_LAYERA_MODULATION
:
1917 c
->layer
[0].modulation
= data
;
1919 case DTV_ISDBT_LAYERA_SEGMENT_COUNT
:
1920 c
->layer
[0].segment_count
= data
;
1922 case DTV_ISDBT_LAYERA_TIME_INTERLEAVING
:
1923 c
->layer
[0].interleaving
= data
;
1925 case DTV_ISDBT_LAYERB_FEC
:
1926 c
->layer
[1].fec
= data
;
1928 case DTV_ISDBT_LAYERB_MODULATION
:
1929 c
->layer
[1].modulation
= data
;
1931 case DTV_ISDBT_LAYERB_SEGMENT_COUNT
:
1932 c
->layer
[1].segment_count
= data
;
1934 case DTV_ISDBT_LAYERB_TIME_INTERLEAVING
:
1935 c
->layer
[1].interleaving
= data
;
1937 case DTV_ISDBT_LAYERC_FEC
:
1938 c
->layer
[2].fec
= data
;
1940 case DTV_ISDBT_LAYERC_MODULATION
:
1941 c
->layer
[2].modulation
= data
;
1943 case DTV_ISDBT_LAYERC_SEGMENT_COUNT
:
1944 c
->layer
[2].segment_count
= data
;
1946 case DTV_ISDBT_LAYERC_TIME_INTERLEAVING
:
1947 c
->layer
[2].interleaving
= data
;
1950 /* Multistream support */
1952 case DTV_DVBT2_PLP_ID_LEGACY
:
1953 c
->stream_id
= data
;
1956 /* Physical layer scrambling support */
1957 case DTV_SCRAMBLING_SEQUENCE_INDEX
:
1958 c
->scrambling_sequence_index
= data
;
1962 case DTV_ATSCMH_PARADE_ID
:
1963 fe
->dtv_property_cache
.atscmh_parade_id
= data
;
1965 case DTV_ATSCMH_RS_FRAME_ENSEMBLE
:
1966 fe
->dtv_property_cache
.atscmh_rs_frame_ensemble
= data
;
1971 if (fe
->ops
.set_lna
)
1972 r
= fe
->ops
.set_lna(fe
);
1984 static int dvb_frontend_do_ioctl(struct file
*file
, unsigned int cmd
,
1987 struct dvb_device
*dvbdev
= file
->private_data
;
1988 struct dvb_frontend
*fe
= dvbdev
->priv
;
1989 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
1992 dev_dbg(fe
->dvb
->device
, "%s: (%d)\n", __func__
, _IOC_NR(cmd
));
1993 if (down_interruptible(&fepriv
->sem
))
1994 return -ERESTARTSYS
;
1996 if (fe
->exit
!= DVB_FE_NO_EXIT
) {
2002 * If the frontend is opened in read-only mode, only the ioctls
2003 * that don't interfere with the tune logic should be accepted.
2004 * That allows an external application to monitor the DVB QoS and
2005 * statistics parameters.
2007 * That matches all _IOR() ioctls, except for two special cases:
2008 * - FE_GET_EVENT is part of the tuning logic on a DVB application;
2009 * - FE_DISEQC_RECV_SLAVE_REPLY is part of DiSEqC 2.0
2011 * So, those two ioctls should also return -EPERM, as otherwise
2012 * reading from them would interfere with a DVB tune application
2014 if ((file
->f_flags
& O_ACCMODE
) == O_RDONLY
2015 && (_IOC_DIR(cmd
) != _IOC_READ
2016 || cmd
== FE_GET_EVENT
2017 || cmd
== FE_DISEQC_RECV_SLAVE_REPLY
)) {
2022 err
= dvb_frontend_handle_ioctl(file
, cmd
, parg
);
2028 static long dvb_frontend_ioctl(struct file
*file
, unsigned int cmd
,
2031 struct dvb_device
*dvbdev
= file
->private_data
;
2036 return dvb_usercopy(file
, cmd
, arg
, dvb_frontend_do_ioctl
);
2039 #ifdef CONFIG_COMPAT
2040 struct compat_dtv_property
{
2045 struct dtv_fe_stats st
;
2050 compat_uptr_t reserved2
;
2054 } __attribute__ ((packed
));
2056 struct compat_dtv_properties
{
2058 compat_uptr_t props
;
2061 #define COMPAT_FE_SET_PROPERTY _IOW('o', 82, struct compat_dtv_properties)
2062 #define COMPAT_FE_GET_PROPERTY _IOR('o', 83, struct compat_dtv_properties)
2064 static int dvb_frontend_handle_compat_ioctl(struct file
*file
, unsigned int cmd
,
2067 struct dvb_device
*dvbdev
= file
->private_data
;
2068 struct dvb_frontend
*fe
= dvbdev
->priv
;
2069 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2072 if (cmd
== COMPAT_FE_SET_PROPERTY
) {
2073 struct compat_dtv_properties prop
, *tvps
= NULL
;
2074 struct compat_dtv_property
*tvp
= NULL
;
2076 if (copy_from_user(&prop
, compat_ptr(arg
), sizeof(prop
)))
2082 * Put an arbitrary limit on the number of messages that can
2085 if (!tvps
->num
|| (tvps
->num
> DTV_IOCTL_MAX_MSGS
))
2088 tvp
= memdup_user(compat_ptr(tvps
->props
), tvps
->num
* sizeof(*tvp
));
2090 return PTR_ERR(tvp
);
2092 for (i
= 0; i
< tvps
->num
; i
++) {
2093 err
= dtv_property_process_set(fe
, file
,
2102 } else if (cmd
== COMPAT_FE_GET_PROPERTY
) {
2103 struct compat_dtv_properties prop
, *tvps
= NULL
;
2104 struct compat_dtv_property
*tvp
= NULL
;
2105 struct dtv_frontend_properties getp
= fe
->dtv_property_cache
;
2107 if (copy_from_user(&prop
, compat_ptr(arg
), sizeof(prop
)))
2113 * Put an arbitrary limit on the number of messages that can
2116 if (!tvps
->num
|| (tvps
->num
> DTV_IOCTL_MAX_MSGS
))
2119 tvp
= memdup_user(compat_ptr(tvps
->props
), tvps
->num
* sizeof(*tvp
));
2121 return PTR_ERR(tvp
);
2124 * Let's use our own copy of property cache, in order to
2125 * avoid mangling with DTV zigzag logic, as drivers might
2126 * return crap, if they don't check if the data is available
2127 * before updating the properties cache.
2129 if (fepriv
->state
!= FESTATE_IDLE
) {
2130 err
= dtv_get_frontend(fe
, &getp
, NULL
);
2136 for (i
= 0; i
< tvps
->num
; i
++) {
2137 err
= dtv_property_process_get(
2138 fe
, &getp
, (struct dtv_property
*)(tvp
+ i
), file
);
2145 if (copy_to_user((void __user
*)compat_ptr(tvps
->props
), tvp
,
2146 tvps
->num
* sizeof(struct compat_dtv_property
))) {
2156 static long dvb_frontend_compat_ioctl(struct file
*file
, unsigned int cmd
,
2159 struct dvb_device
*dvbdev
= file
->private_data
;
2160 struct dvb_frontend
*fe
= dvbdev
->priv
;
2161 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2164 if (cmd
== COMPAT_FE_SET_PROPERTY
|| cmd
== COMPAT_FE_GET_PROPERTY
) {
2165 if (down_interruptible(&fepriv
->sem
))
2166 return -ERESTARTSYS
;
2168 err
= dvb_frontend_handle_compat_ioctl(file
, cmd
, arg
);
2174 return dvb_frontend_ioctl(file
, cmd
, (unsigned long)compat_ptr(arg
));
2178 static int dtv_set_frontend(struct dvb_frontend
*fe
)
2180 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2181 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
2182 struct dvb_frontend_tune_settings fetunesettings
;
2185 if (dvb_frontend_check_parameters(fe
) < 0)
2189 * Initialize output parameters to match the values given by
2190 * the user. FE_SET_FRONTEND triggers an initial frontend event
2191 * with status = 0, which copies output parameters to userspace.
2193 dtv_property_legacy_params_sync(fe
, c
, &fepriv
->parameters_out
);
2196 * Be sure that the bandwidth will be filled for all
2197 * non-satellite systems, as tuners need to know what
2198 * low pass/Nyquist half filter should be applied, in
2199 * order to avoid inter-channel noise.
2201 * ISDB-T and DVB-T/T2 already sets bandwidth.
2202 * ATSC and DVB-C don't set, so, the core should fill it.
2204 * On DVB-C Annex A and C, the bandwidth is a function of
2205 * the roll-off and symbol rate. Annex B defines different
2206 * roll-off factors depending on the modulation. Fortunately,
2207 * Annex B is only used with 6MHz, so there's no need to
2210 * While not officially supported, a side effect of handling it at
2211 * the cache level is that a program could retrieve the bandwidth
2212 * via DTV_BANDWIDTH_HZ, which may be useful for test programs.
2214 switch (c
->delivery_system
) {
2216 case SYS_DVBC_ANNEX_B
:
2217 c
->bandwidth_hz
= 6000000;
2219 case SYS_DVBC_ANNEX_A
:
2222 case SYS_DVBC_ANNEX_C
:
2231 switch (c
->rolloff
) {
2247 c
->bandwidth_hz
= mult_frac(c
->symbol_rate
, rolloff
, 100);
2249 /* force auto frequency inversion if requested */
2250 if (dvb_force_auto_inversion
)
2251 c
->inversion
= INVERSION_AUTO
;
2254 * without hierarchical coding code_rate_LP is irrelevant,
2255 * so we tolerate the otherwise invalid FEC_NONE setting
2257 if (c
->hierarchy
== HIERARCHY_NONE
&& c
->code_rate_LP
== FEC_NONE
)
2258 c
->code_rate_LP
= FEC_AUTO
;
2260 /* get frontend-specific tuning settings */
2261 memset(&fetunesettings
, 0, sizeof(struct dvb_frontend_tune_settings
));
2262 if (fe
->ops
.get_tune_settings
&& (fe
->ops
.get_tune_settings(fe
, &fetunesettings
) == 0)) {
2263 fepriv
->min_delay
= (fetunesettings
.min_delay_ms
* HZ
) / 1000;
2264 fepriv
->max_drift
= fetunesettings
.max_drift
;
2265 fepriv
->step_size
= fetunesettings
.step_size
;
2267 /* default values */
2268 switch (c
->delivery_system
) {
2273 case SYS_DVBC_ANNEX_A
:
2274 case SYS_DVBC_ANNEX_C
:
2275 fepriv
->min_delay
= HZ
/ 20;
2276 fepriv
->step_size
= c
->symbol_rate
/ 16000;
2277 fepriv
->max_drift
= c
->symbol_rate
/ 2000;
2283 fepriv
->min_delay
= HZ
/ 20;
2284 fepriv
->step_size
= dvb_frontend_get_stepsize(fe
) * 2;
2285 fepriv
->max_drift
= (dvb_frontend_get_stepsize(fe
) * 2) + 1;
2289 * FIXME: This sounds wrong! if freqency_stepsize is
2290 * defined by the frontend, why not use it???
2292 fepriv
->min_delay
= HZ
/ 20;
2293 fepriv
->step_size
= 0; /* no zigzag */
2294 fepriv
->max_drift
= 0;
2298 if (dvb_override_tune_delay
> 0)
2299 fepriv
->min_delay
= (dvb_override_tune_delay
* HZ
) / 1000;
2301 fepriv
->state
= FESTATE_RETUNE
;
2303 /* Request the search algorithm to search */
2304 fepriv
->algo_status
|= DVBFE_ALGO_SEARCH_AGAIN
;
2306 dvb_frontend_clear_events(fe
);
2307 dvb_frontend_add_event(fe
, 0);
2308 dvb_frontend_wakeup(fe
);
2314 static int dvb_frontend_handle_ioctl(struct file
*file
,
2315 unsigned int cmd
, void *parg
)
2317 struct dvb_device
*dvbdev
= file
->private_data
;
2318 struct dvb_frontend
*fe
= dvbdev
->priv
;
2319 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2320 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
2321 int i
, err
= -ENOTSUPP
;
2323 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
2326 case FE_SET_PROPERTY
: {
2327 struct dtv_properties
*tvps
= parg
;
2328 struct dtv_property
*tvp
= NULL
;
2330 dev_dbg(fe
->dvb
->device
, "%s: properties.num = %d\n",
2331 __func__
, tvps
->num
);
2332 dev_dbg(fe
->dvb
->device
, "%s: properties.props = %p\n",
2333 __func__
, tvps
->props
);
2336 * Put an arbitrary limit on the number of messages that can
2339 if (!tvps
->num
|| (tvps
->num
> DTV_IOCTL_MAX_MSGS
))
2342 tvp
= memdup_user((void __user
*)tvps
->props
, tvps
->num
* sizeof(*tvp
));
2344 return PTR_ERR(tvp
);
2346 for (i
= 0; i
< tvps
->num
; i
++) {
2347 err
= dtv_property_process_set(fe
, file
,
2359 case FE_GET_PROPERTY
: {
2360 struct dtv_properties
*tvps
= parg
;
2361 struct dtv_property
*tvp
= NULL
;
2362 struct dtv_frontend_properties getp
= fe
->dtv_property_cache
;
2364 dev_dbg(fe
->dvb
->device
, "%s: properties.num = %d\n",
2365 __func__
, tvps
->num
);
2366 dev_dbg(fe
->dvb
->device
, "%s: properties.props = %p\n",
2367 __func__
, tvps
->props
);
2370 * Put an arbitrary limit on the number of messages that can
2373 if (!tvps
->num
|| (tvps
->num
> DTV_IOCTL_MAX_MSGS
))
2376 tvp
= memdup_user((void __user
*)tvps
->props
, tvps
->num
* sizeof(*tvp
));
2378 return PTR_ERR(tvp
);
2381 * Let's use our own copy of property cache, in order to
2382 * avoid mangling with DTV zigzag logic, as drivers might
2383 * return crap, if they don't check if the data is available
2384 * before updating the properties cache.
2386 if (fepriv
->state
!= FESTATE_IDLE
) {
2387 err
= dtv_get_frontend(fe
, &getp
, NULL
);
2393 for (i
= 0; i
< tvps
->num
; i
++) {
2394 err
= dtv_property_process_get(fe
, &getp
,
2402 if (copy_to_user((void __user
*)tvps
->props
, tvp
,
2403 tvps
->num
* sizeof(struct dtv_property
))) {
2413 struct dvb_frontend_info
*info
= parg
;
2414 memset(info
, 0, sizeof(*info
));
2416 strscpy(info
->name
, fe
->ops
.info
.name
, sizeof(info
->name
));
2417 info
->symbol_rate_min
= fe
->ops
.info
.symbol_rate_min
;
2418 info
->symbol_rate_max
= fe
->ops
.info
.symbol_rate_max
;
2419 info
->symbol_rate_tolerance
= fe
->ops
.info
.symbol_rate_tolerance
;
2420 info
->caps
= fe
->ops
.info
.caps
;
2421 info
->frequency_stepsize
= dvb_frontend_get_stepsize(fe
);
2422 dvb_frontend_get_frequency_limits(fe
, &info
->frequency_min
,
2423 &info
->frequency_max
,
2424 &info
->frequency_tolerance
);
2427 * Associate the 4 delivery systems supported by DVBv3
2428 * API with their DVBv5 counterpart. For the other standards,
2429 * use the closest type, assuming that it would hopefully
2430 * work with a DVBv3 application.
2431 * It should be noticed that, on multi-frontend devices with
2432 * different types (terrestrial and cable, for example),
2433 * a pure DVBv3 application won't be able to use all delivery
2434 * systems. Yet, changing the DVBv5 cache to the other delivery
2435 * system should be enough for making it work.
2437 switch (dvbv3_type(c
->delivery_system
)) {
2439 info
->type
= FE_QPSK
;
2442 info
->type
= FE_ATSC
;
2445 info
->type
= FE_QAM
;
2448 info
->type
= FE_OFDM
;
2451 dev_err(fe
->dvb
->device
,
2452 "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n",
2453 __func__
, c
->delivery_system
);
2454 info
->type
= FE_OFDM
;
2456 dev_dbg(fe
->dvb
->device
, "%s: current delivery system on cache: %d, V3 type: %d\n",
2457 __func__
, c
->delivery_system
, info
->type
);
2459 /* Set CAN_INVERSION_AUTO bit on in other than oneshot mode */
2460 if (!(fepriv
->tune_mode_flags
& FE_TUNE_MODE_ONESHOT
))
2461 info
->caps
|= FE_CAN_INVERSION_AUTO
;
2466 case FE_READ_STATUS
: {
2467 enum fe_status
*status
= parg
;
2469 /* if retune was requested but hasn't occurred yet, prevent
2470 * that user get signal state from previous tuning */
2471 if (fepriv
->state
== FESTATE_RETUNE
||
2472 fepriv
->state
== FESTATE_ERROR
) {
2478 if (fe
->ops
.read_status
)
2479 err
= fe
->ops
.read_status(fe
, status
);
2483 case FE_DISEQC_RESET_OVERLOAD
:
2484 if (fe
->ops
.diseqc_reset_overload
) {
2485 err
= fe
->ops
.diseqc_reset_overload(fe
);
2486 fepriv
->state
= FESTATE_DISEQC
;
2491 case FE_DISEQC_SEND_MASTER_CMD
:
2492 if (fe
->ops
.diseqc_send_master_cmd
) {
2493 struct dvb_diseqc_master_cmd
*cmd
= parg
;
2495 if (cmd
->msg_len
> sizeof(cmd
->msg
)) {
2499 err
= fe
->ops
.diseqc_send_master_cmd(fe
, cmd
);
2500 fepriv
->state
= FESTATE_DISEQC
;
2505 case FE_DISEQC_SEND_BURST
:
2506 if (fe
->ops
.diseqc_send_burst
) {
2507 err
= fe
->ops
.diseqc_send_burst(fe
,
2508 (enum fe_sec_mini_cmd
)parg
);
2509 fepriv
->state
= FESTATE_DISEQC
;
2515 if (fe
->ops
.set_tone
) {
2516 err
= fe
->ops
.set_tone(fe
,
2517 (enum fe_sec_tone_mode
)parg
);
2518 fepriv
->tone
= (enum fe_sec_tone_mode
)parg
;
2519 fepriv
->state
= FESTATE_DISEQC
;
2524 case FE_SET_VOLTAGE
:
2525 if (fe
->ops
.set_voltage
) {
2526 err
= fe
->ops
.set_voltage(fe
,
2527 (enum fe_sec_voltage
)parg
);
2528 fepriv
->voltage
= (enum fe_sec_voltage
)parg
;
2529 fepriv
->state
= FESTATE_DISEQC
;
2534 case FE_DISEQC_RECV_SLAVE_REPLY
:
2535 if (fe
->ops
.diseqc_recv_slave_reply
)
2536 err
= fe
->ops
.diseqc_recv_slave_reply(fe
, parg
);
2539 case FE_ENABLE_HIGH_LNB_VOLTAGE
:
2540 if (fe
->ops
.enable_high_lnb_voltage
)
2541 err
= fe
->ops
.enable_high_lnb_voltage(fe
, (long)parg
);
2544 case FE_SET_FRONTEND_TUNE_MODE
:
2545 fepriv
->tune_mode_flags
= (unsigned long)parg
;
2549 /* DEPRECATED dish control ioctls */
2551 case FE_DISHNETWORK_SEND_LEGACY_CMD
:
2552 if (fe
->ops
.dishnetwork_send_legacy_command
) {
2553 err
= fe
->ops
.dishnetwork_send_legacy_command(fe
,
2554 (unsigned long)parg
);
2555 fepriv
->state
= FESTATE_DISEQC
;
2557 } else if (fe
->ops
.set_voltage
) {
2559 * NOTE: This is a fallback condition. Some frontends
2560 * (stv0299 for instance) take longer than 8msec to
2561 * respond to a set_voltage command. Those switches
2562 * need custom routines to switch properly. For all
2563 * other frontends, the following should work ok.
2564 * Dish network legacy switches (as used by Dish500)
2565 * are controlled by sending 9-bit command words
2566 * spaced 8msec apart.
2567 * the actual command word is switch/port dependent
2568 * so it is up to the userspace application to send
2569 * the right command.
2570 * The command must always start with a '0' after
2571 * initialization, so parg is 8 bits and does not
2572 * include the initialization or start bit
2574 unsigned long swcmd
= ((unsigned long)parg
) << 1;
2580 if (dvb_frontend_debug
)
2581 dprintk("switch command: 0x%04lx\n",
2583 nexttime
= ktime_get_boottime();
2584 if (dvb_frontend_debug
)
2586 /* before sending a command, initialize by sending
2587 * a 32ms 18V to the switch
2589 fe
->ops
.set_voltage(fe
, SEC_VOLTAGE_18
);
2590 dvb_frontend_sleep_until(&nexttime
, 32000);
2592 for (i
= 0; i
< 9; i
++) {
2593 if (dvb_frontend_debug
)
2594 tv
[i
+ 1] = ktime_get_boottime();
2595 if ((swcmd
& 0x01) != last
) {
2596 /* set voltage to (last ? 13V : 18V) */
2597 fe
->ops
.set_voltage(fe
, (last
) ? SEC_VOLTAGE_13
: SEC_VOLTAGE_18
);
2598 last
= (last
) ? 0 : 1;
2602 dvb_frontend_sleep_until(&nexttime
, 8000);
2604 if (dvb_frontend_debug
) {
2605 dprintk("(adapter %d): switch delay (should be 32k followed by all 8k)\n",
2607 for (i
= 1; i
< 10; i
++)
2608 pr_info("%d: %d\n", i
,
2609 (int)ktime_us_delta(tv
[i
], tv
[i
- 1]));
2612 fepriv
->state
= FESTATE_DISEQC
;
2617 /* DEPRECATED statistics ioctls */
2620 if (fe
->ops
.read_ber
) {
2622 err
= fe
->ops
.read_ber(fe
, parg
);
2628 case FE_READ_SIGNAL_STRENGTH
:
2629 if (fe
->ops
.read_signal_strength
) {
2631 err
= fe
->ops
.read_signal_strength(fe
, parg
);
2638 if (fe
->ops
.read_snr
) {
2640 err
= fe
->ops
.read_snr(fe
, parg
);
2646 case FE_READ_UNCORRECTED_BLOCKS
:
2647 if (fe
->ops
.read_ucblocks
) {
2649 err
= fe
->ops
.read_ucblocks(fe
, parg
);
2655 /* DEPRECATED DVBv3 ioctls */
2657 case FE_SET_FRONTEND
:
2658 err
= dvbv3_set_delivery_system(fe
);
2662 err
= dtv_property_cache_sync(fe
, c
, parg
);
2665 err
= dtv_set_frontend(fe
);
2668 err
= dvb_frontend_get_event(fe
, parg
, file
->f_flags
);
2671 case FE_GET_FRONTEND
: {
2672 struct dtv_frontend_properties getp
= fe
->dtv_property_cache
;
2675 * Let's use our own copy of property cache, in order to
2676 * avoid mangling with DTV zigzag logic, as drivers might
2677 * return crap, if they don't check if the data is available
2678 * before updating the properties cache.
2680 err
= dtv_get_frontend(fe
, &getp
, parg
);
2691 static __poll_t
dvb_frontend_poll(struct file
*file
, struct poll_table_struct
*wait
)
2693 struct dvb_device
*dvbdev
= file
->private_data
;
2694 struct dvb_frontend
*fe
= dvbdev
->priv
;
2695 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2697 dev_dbg_ratelimited(fe
->dvb
->device
, "%s:\n", __func__
);
2699 poll_wait(file
, &fepriv
->events
.wait_queue
, wait
);
2701 if (fepriv
->events
.eventw
!= fepriv
->events
.eventr
)
2702 return (EPOLLIN
| EPOLLRDNORM
| EPOLLPRI
);
2707 static int dvb_frontend_open(struct inode
*inode
, struct file
*file
)
2709 struct dvb_device
*dvbdev
= file
->private_data
;
2710 struct dvb_frontend
*fe
= dvbdev
->priv
;
2711 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2712 struct dvb_adapter
*adapter
= fe
->dvb
;
2715 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
2716 if (fe
->exit
== DVB_FE_DEVICE_REMOVED
)
2719 if (adapter
->mfe_shared
) {
2720 mutex_lock(&adapter
->mfe_lock
);
2722 if (!adapter
->mfe_dvbdev
)
2723 adapter
->mfe_dvbdev
= dvbdev
;
2725 else if (adapter
->mfe_dvbdev
!= dvbdev
) {
2727 *mfedev
= adapter
->mfe_dvbdev
;
2729 *mfe
= mfedev
->priv
;
2730 struct dvb_frontend_private
2731 *mfepriv
= mfe
->frontend_priv
;
2732 int mferetry
= (dvb_mfe_wait_time
<< 1);
2734 mutex_unlock(&adapter
->mfe_lock
);
2735 while (mferetry
-- && (mfedev
->users
!= -1 ||
2737 if (msleep_interruptible(500)) {
2738 if (signal_pending(current
))
2743 mutex_lock(&adapter
->mfe_lock
);
2744 if (adapter
->mfe_dvbdev
!= dvbdev
) {
2745 mfedev
= adapter
->mfe_dvbdev
;
2747 mfepriv
= mfe
->frontend_priv
;
2748 if (mfedev
->users
!= -1 ||
2750 mutex_unlock(&adapter
->mfe_lock
);
2753 adapter
->mfe_dvbdev
= dvbdev
;
2758 if (dvbdev
->users
== -1 && fe
->ops
.ts_bus_ctrl
) {
2759 if ((ret
= fe
->ops
.ts_bus_ctrl(fe
, 1)) < 0)
2762 /* If we took control of the bus, we need to force
2763 reinitialization. This is because many ts_bus_ctrl()
2764 functions strobe the RESET pin on the demod, and if the
2765 frontend thread already exists then the dvb_init() routine
2766 won't get called (which is what usually does initial
2767 register configuration). */
2768 fepriv
->reinitialise
= 1;
2771 if ((ret
= dvb_generic_open(inode
, file
)) < 0)
2774 if ((file
->f_flags
& O_ACCMODE
) != O_RDONLY
) {
2775 /* normal tune mode when opened R/W */
2776 fepriv
->tune_mode_flags
&= ~FE_TUNE_MODE_ONESHOT
;
2778 fepriv
->voltage
= -1;
2780 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
2781 mutex_lock(&fe
->dvb
->mdev_lock
);
2782 if (fe
->dvb
->mdev
) {
2783 mutex_lock(&fe
->dvb
->mdev
->graph_mutex
);
2784 if (fe
->dvb
->mdev
->enable_source
)
2785 ret
= fe
->dvb
->mdev
->enable_source(
2788 mutex_unlock(&fe
->dvb
->mdev
->graph_mutex
);
2790 mutex_unlock(&fe
->dvb
->mdev_lock
);
2791 dev_err(fe
->dvb
->device
,
2792 "Tuner is busy. Error %d\n", ret
);
2796 mutex_unlock(&fe
->dvb
->mdev_lock
);
2798 ret
= dvb_frontend_start(fe
);
2802 /* empty event queue */
2803 fepriv
->events
.eventr
= fepriv
->events
.eventw
= 0;
2806 dvb_frontend_get(fe
);
2808 if (adapter
->mfe_shared
)
2809 mutex_unlock(&adapter
->mfe_lock
);
2813 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
2814 mutex_lock(&fe
->dvb
->mdev_lock
);
2815 if (fe
->dvb
->mdev
) {
2816 mutex_lock(&fe
->dvb
->mdev
->graph_mutex
);
2817 if (fe
->dvb
->mdev
->disable_source
)
2818 fe
->dvb
->mdev
->disable_source(dvbdev
->entity
);
2819 mutex_unlock(&fe
->dvb
->mdev
->graph_mutex
);
2821 mutex_unlock(&fe
->dvb
->mdev_lock
);
2824 dvb_generic_release(inode
, file
);
2826 if (dvbdev
->users
== -1 && fe
->ops
.ts_bus_ctrl
)
2827 fe
->ops
.ts_bus_ctrl(fe
, 0);
2829 if (adapter
->mfe_shared
)
2830 mutex_unlock(&adapter
->mfe_lock
);
2834 static int dvb_frontend_release(struct inode
*inode
, struct file
*file
)
2836 struct dvb_device
*dvbdev
= file
->private_data
;
2837 struct dvb_frontend
*fe
= dvbdev
->priv
;
2838 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2841 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
2843 if ((file
->f_flags
& O_ACCMODE
) != O_RDONLY
) {
2844 fepriv
->release_jiffies
= jiffies
;
2848 ret
= dvb_generic_release(inode
, file
);
2850 if (dvbdev
->users
== -1) {
2851 wake_up(&fepriv
->wait_queue
);
2852 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
2853 mutex_lock(&fe
->dvb
->mdev_lock
);
2854 if (fe
->dvb
->mdev
) {
2855 mutex_lock(&fe
->dvb
->mdev
->graph_mutex
);
2856 if (fe
->dvb
->mdev
->disable_source
)
2857 fe
->dvb
->mdev
->disable_source(dvbdev
->entity
);
2858 mutex_unlock(&fe
->dvb
->mdev
->graph_mutex
);
2860 mutex_unlock(&fe
->dvb
->mdev_lock
);
2862 if (fe
->exit
!= DVB_FE_NO_EXIT
)
2863 wake_up(&dvbdev
->wait_queue
);
2864 if (fe
->ops
.ts_bus_ctrl
)
2865 fe
->ops
.ts_bus_ctrl(fe
, 0);
2868 dvb_frontend_put(fe
);
2873 static const struct file_operations dvb_frontend_fops
= {
2874 .owner
= THIS_MODULE
,
2875 .unlocked_ioctl
= dvb_frontend_ioctl
,
2876 #ifdef CONFIG_COMPAT
2877 .compat_ioctl
= dvb_frontend_compat_ioctl
,
2879 .poll
= dvb_frontend_poll
,
2880 .open
= dvb_frontend_open
,
2881 .release
= dvb_frontend_release
,
2882 .llseek
= noop_llseek
,
2885 int dvb_frontend_suspend(struct dvb_frontend
*fe
)
2889 dev_dbg(fe
->dvb
->device
, "%s: adap=%d fe=%d\n", __func__
, fe
->dvb
->num
,
2892 if (fe
->ops
.tuner_ops
.suspend
)
2893 ret
= fe
->ops
.tuner_ops
.suspend(fe
);
2894 else if (fe
->ops
.tuner_ops
.sleep
)
2895 ret
= fe
->ops
.tuner_ops
.sleep(fe
);
2898 ret
= fe
->ops
.sleep(fe
);
2902 EXPORT_SYMBOL(dvb_frontend_suspend
);
2904 int dvb_frontend_resume(struct dvb_frontend
*fe
)
2906 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
2909 dev_dbg(fe
->dvb
->device
, "%s: adap=%d fe=%d\n", __func__
, fe
->dvb
->num
,
2912 fe
->exit
= DVB_FE_DEVICE_RESUME
;
2914 ret
= fe
->ops
.init(fe
);
2916 if (fe
->ops
.tuner_ops
.resume
)
2917 ret
= fe
->ops
.tuner_ops
.resume(fe
);
2918 else if (fe
->ops
.tuner_ops
.init
)
2919 ret
= fe
->ops
.tuner_ops
.init(fe
);
2921 if (fe
->ops
.set_tone
&& fepriv
->tone
!= -1)
2922 fe
->ops
.set_tone(fe
, fepriv
->tone
);
2923 if (fe
->ops
.set_voltage
&& fepriv
->voltage
!= -1)
2924 fe
->ops
.set_voltage(fe
, fepriv
->voltage
);
2926 fe
->exit
= DVB_FE_NO_EXIT
;
2927 fepriv
->state
= FESTATE_RETUNE
;
2928 dvb_frontend_wakeup(fe
);
2932 EXPORT_SYMBOL(dvb_frontend_resume
);
2934 int dvb_register_frontend(struct dvb_adapter
*dvb
,
2935 struct dvb_frontend
*fe
)
2937 struct dvb_frontend_private
*fepriv
;
2938 const struct dvb_device dvbdev_template
= {
2941 .readers
= (~0) - 1,
2942 .fops
= &dvb_frontend_fops
,
2943 #if defined(CONFIG_MEDIA_CONTROLLER_DVB)
2944 .name
= fe
->ops
.info
.name
,
2948 dev_dbg(dvb
->device
, "%s:\n", __func__
);
2950 if (mutex_lock_interruptible(&frontend_mutex
))
2951 return -ERESTARTSYS
;
2953 fe
->frontend_priv
= kzalloc(sizeof(struct dvb_frontend_private
), GFP_KERNEL
);
2954 if (!fe
->frontend_priv
) {
2955 mutex_unlock(&frontend_mutex
);
2958 fepriv
= fe
->frontend_priv
;
2960 kref_init(&fe
->refcount
);
2963 * After initialization, there need to be two references: one
2964 * for dvb_unregister_frontend(), and another one for
2965 * dvb_frontend_detach().
2967 dvb_frontend_get(fe
);
2969 sema_init(&fepriv
->sem
, 1);
2970 init_waitqueue_head(&fepriv
->wait_queue
);
2971 init_waitqueue_head(&fepriv
->events
.wait_queue
);
2972 mutex_init(&fepriv
->events
.mtx
);
2974 fepriv
->inversion
= INVERSION_OFF
;
2976 dev_info(fe
->dvb
->device
,
2977 "DVB: registering adapter %i frontend %i (%s)...\n",
2978 fe
->dvb
->num
, fe
->id
, fe
->ops
.info
.name
);
2980 dvb_register_device(fe
->dvb
, &fepriv
->dvbdev
, &dvbdev_template
,
2981 fe
, DVB_DEVICE_FRONTEND
, 0);
2984 * Initialize the cache to the proper values according with the
2985 * first supported delivery system (ops->delsys[0])
2988 fe
->dtv_property_cache
.delivery_system
= fe
->ops
.delsys
[0];
2989 dvb_frontend_clear_cache(fe
);
2991 mutex_unlock(&frontend_mutex
);
2994 EXPORT_SYMBOL(dvb_register_frontend
);
2996 int dvb_unregister_frontend(struct dvb_frontend
*fe
)
2998 struct dvb_frontend_private
*fepriv
= fe
->frontend_priv
;
3000 dev_dbg(fe
->dvb
->device
, "%s:\n", __func__
);
3002 mutex_lock(&frontend_mutex
);
3003 dvb_frontend_stop(fe
);
3004 dvb_remove_device(fepriv
->dvbdev
);
3006 /* fe is invalid now */
3007 mutex_unlock(&frontend_mutex
);
3008 dvb_frontend_put(fe
);
3011 EXPORT_SYMBOL(dvb_unregister_frontend
);
3013 static void dvb_frontend_invoke_release(struct dvb_frontend
*fe
,
3014 void (*release
)(struct dvb_frontend
*fe
))
3018 #ifdef CONFIG_MEDIA_ATTACH
3019 dvb_detach(release
);
3024 void dvb_frontend_detach(struct dvb_frontend
*fe
)
3026 dvb_frontend_invoke_release(fe
, fe
->ops
.release_sec
);
3027 dvb_frontend_invoke_release(fe
, fe
->ops
.tuner_ops
.release
);
3028 dvb_frontend_invoke_release(fe
, fe
->ops
.analog_ops
.release
);
3029 dvb_frontend_invoke_release(fe
, fe
->ops
.detach
);
3030 dvb_frontend_put(fe
);
3032 EXPORT_SYMBOL(dvb_frontend_detach
);