Rodrigo Vivi [Thu, 20 Aug 2015 15:28:18 +0000 (08:28 -0700)]
linux-firmware: New major GuC release for Skylake.
Following additions from ver1:
1. Performance Improvement.
2. Fix reset issue.
3. Scheduler fix.
4. Merge in new power management features.
5. Firmware layout changes.
6. Force Fence WA to guarantee correct ordering of GTT writes from uKernel.
Rodrigo Vivi [Thu, 20 Aug 2015 15:20:48 +0000 (08:20 -0700)]
linux-firmware: Clean up i915 by removing old skl dmc firmware.
The code points to the major version that is a link to the most
recent one, so we can remove the old firmware blobs.
For tests and validation purposes we will let at least 3 latest
minor available, but we need to let linux-firmware repo as
clean as possible, so let's remove old and unused ones.
Rodrigo Vivi [Thu, 20 Aug 2015 15:18:08 +0000 (08:18 -0700)]
linux-firmware: New minor DMC release for Skylake - ver1_21
Following additions from ver1.20
1. Fixed GT interrupts issue when DC6 is enabled
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.20
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Rodrigo Vivi [Thu, 20 Aug 2015 00:11:50 +0000 (17:11 -0700)]
linux-firmware: New minor DMC release for Skylake - ver1_20
Following additions from ver1.19
1. Changes to the waits times for pll enable and disable.
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.19
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
linux-firmware: New minor DMC release for Broxton - ver1_05
Following additions from ver1.04
1. No changes to the FW program itself
2. CSS header size field was fixed
3. Date field is fixed in header.
4. DC3_DC5_COUNT � 80038
linux-firmware: New minor DMC release for Skylake - ver1_19
Following additions:
1. Updated FW for NV12 enabling
3. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.18 and ver1.17
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
usbdux: usbduxsigma: fixed timing issues between ADC and DAC
When sync ADC and the DAC was running at the same time the ADC
showed spikes in the signal. This happened when just before the
DRDY from the ADC was triggered a DAC interrupt was dealt with.
ADC and DAC share the same SPI bus and priority is now given the
ADC. The DAC values are now first stored in a buffer and
are only send to the DAC once the ADC has finished
converting all channels (start = 0) so that the SPI bus is
definitely quiet for about 100us.
for future driver versions I've added a digtial I/O read via
endpoint in1. This is not yet used but might be used in the
future for low latency IO reads if all ports are input ports
and thus the write could be omitted.
usbdux: usbduxsigma: added soft interval mode in the firmware
urb->interval is ignored in xhci drivers. Instead, the firmware
has an interval counter and transmits data at this interval.
The uframes in-between are zero length packets. In order to be
backward compatible with older kernels which support only USB 2.0
and 1.1 there are two ADC modes in the firmware. The old one which
assumes that the interval is established by the host (urb->interval)
and the new one where the interval value is transmitted to the
firmware.
usbdux: usbduxsigma: changed firmware from ADC polling to IRQ processing
In order to prepare the firmware to work with the EHCI driver the
ADC data acquisition is now done by triggering the acquisition with
a start of frame interrupt (SOF) and then the collection of the data
is done via "data ready" interrupts until all data has been received.
Once this has happend then the whole packet is dispatched and at the
next SOF the next packet is dispatched. If there are SOF interrupts
happening during the data acquisiton it is no longer interupted and
only send out the next ISO packet once it has comleted its job.
Also now the USBDUXSIGMA has now plenty of time to deal with other
interrupts between ADC data readouts so that for example the DIO
can now be handled much quicker.
usbdux: Makefile_dux: as31 compile no longer needed
Removed the as31 download instructions. My patches have been
integrated into the official as31 release which now also allows
including files. So the standard as31 is fine. Signed-off-by: Bernd Porr <mail@berndporr.me.uk> Signed-off-by: Bernd Porr <mail@berndporr.me.uk> Signed-off-by: Kyle McMartin <kyle@kernel.org>
The new FW will allow us to utilize some new features in our driver,
mainly adding vlan stripping offload and vxlan offload support.
In addition, this fixes several issues:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- FCoE traffic might not recover after a failue while there's traffic
to another function.
Vinod Koul [Wed, 17 Jun 2015 05:43:14 +0000 (11:13 +0530)]
linux-firmware: update audio firmware for Braswell platform
This updates the firmware for BSW platform, which includes the fixes for BSW
power management.
The firmware version is also added to WHENCE file. The version is
v01.0B.02.01.
The md5sum of the file is cf8caa8d33e95744f25adcab1373daff
Firmware licenses on linux-firmware should include an implicit
or explicit patent grant to end users for full device operation
otherwise it would start making linux-firmware useless for many
Linux distributions which have positions against patent encumbered
software [0] [1] [2] and it would mean cherry picking firmware files
out. It can also mean making it problematic to redistribute linux-firmware
in some jurisdictions which could have different positions on
patents, or have already outlawed software patents.
Licenses with implicit patent grants are allowed given that otherwise
we couldn't carry permissively licensed firmwares which would be silly,
but using permissively licensed firmware files which remove patent
grants explicitly are not allowed.
A clarifications is needed as one attempt was already made to include
firmware encumbered by patents without a grant [3] and it was decided
we would not allow these. We clarify this to make this requirement
explicit and prevent these type of further attempts.
Rodrigo Vivi [Sat, 20 Jun 2015 00:29:18 +0000 (17:29 -0700)]
linux-firmware: New minor DMC release for Skylake - ver1_18
Following additions:
1. No changes to the FW program itself
2. CSS header size field was fixed
3. DMCheader length field is mentioned in dwords instead of bytes
4. Date field is fixed in header.
4. Fixed the DMC Header.HeaderLen issue. The HeaderLen is specified in bytes instead of dwords.
6. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.16
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Rodrigo Vivi [Fri, 5 Jun 2015 21:07:12 +0000 (14:07 -0700)]
linux-firmware: New minor DMC release for Skylake.
Following additions:
1. The DE_RRMR and DE_GUCRMR register bits are set before the restore of
the registers to mask the flip done, etc. Once all the registers are
restored, these registers are restored.
2. The pipe interrupt registers are restored only after the plane has
been enabled.
3. Naming of the file changed from .5 to .16 to make it two decimal
points for increased number of versions that can be supported.
4. DC 5 and 6 count locations are in the below mentioned offsets
DC3_DC5_COUNT 80030
DC5_DC6_COUNT 8002C
Rodrigo Vivi [Fri, 5 Jun 2015 21:04:41 +0000 (14:04 -0700)]
linux-firmware: Add i915 DMC firmware for Broxton
DMC provides additional graphics low-power idle states. It provides
capability to save and restore display registers across these
low-power states independently from the OS/Kernel.
This is the first release of DMC firmware for Broxton platforms.
bxt_dmc_ver1.bin is a symbolik link to latest recommended minor
release.
This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.
Rodrigo Vivi [Fri, 5 Jun 2015 21:01:25 +0000 (14:01 -0700)]
linux-firmware: Add i915 GuC firmware
GuC is designed to perform graphics workload scheduling on the various
graphics parallel engines. In this scheduling model, host software
submits work through one of the 256 graphics doorbells and this invokes
the scheduling operation on the appropriate graphics engine. Scheduling
operations include determining which workload to run next, submitting a
workload to a command streamer, pre-empting existing workloads running
on an engine, monitoring progress and notifying host SW when work is
done.
This is the first release of GuC firmware for Skylake platforms.
skl_guc_ver1.bin is a symbolik link to latest recommended minor release.
This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.
Rodrigo Vivi [Fri, 5 Jun 2015 20:50:28 +0000 (13:50 -0700)]
linux-firmware: Add i915 DMC firmware
DMC provides additional graphics low-power idle states. It provides
capability to save and restore display registers across these low-power
states independently from the OS/Kernel.
This is the first release of DMC firmware for Skylake platforms.
skl_dmc_ver1.bin is a symbolik link to latest recommended minor release.
This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.
Yaniv Machani [Sun, 29 Mar 2015 20:22:12 +0000 (23:22 +0300)]
wl18xx: update firmware file, remove conf file
- Firmware file was updated (8.9.0.0.39), includes bug fixes and improvements.
- Configuration binary removed, it is no longer fits all releases.
Moreover it should be configured per HW platform.
More information can found in here :
http://processors.wiki.ti.com/index.php/Open_Source_Wireless_Connectivity_wlconf
Daniel Drake [Fri, 8 May 2015 08:41:53 +0000 (10:41 +0200)]
linux-firmware: Add Realtek Bluetooth HCD firmware
By uploading these firmware files to the Realtek Bluetooth HCD
(on the USB bus), the HCD becomes compliant with standard btusb
interfaces. The code to automatically upload the firmware has
been already upstreamed and it is currently in linux-next.
Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Kalle Valo [Fri, 10 Apr 2015 17:34:54 +0000 (20:34 +0300)]
ath3k: update AR3012 2.2.1 firmware with v.170
This is the latest firmware version for AR3012 2.2.1.
This also includes configuration file for coex support,
where all Bluetooth traffic is treated as high priority.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Arend van Spriel [Fri, 20 Mar 2015 12:44:01 +0000 (13:44 +0100)]
brcm: add firmware files for BCM43602 PCIe device
This patch adds firmware files for the BCM43602 PCIe device
supported by brcmfmac. This device is used in router equipment
like Netgear R8000. For this reason there are two firmware
files in this patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Adrian Chadd [Tue, 10 Mar 2015 23:42:13 +0000 (16:42 -0700)]
Add v1.4.0 firmware for ath9k_htc.
This fixes a variety of issues, including but not limited to:
ath9k_htc_firmware: check only the mesh control present subfield
Fix: bug in extend_tsf near 0x8000000 values
FIX: support rstamps from the future too.
Firmware sometimes returns erroneous timestamps(2)
Fixed incorrect wrapping handling in ath_extend_tsf().
Firmware sometimes returns erroneous timestamps
Added proper synchronization while handling lower 32 bit and
upper 32 bit parts in ar5416GetTsf64().
Fix resetting of txstatus flags.
Fix Array Out of Bounds in rcSibUpdate_ht()
ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame
init.c: do cold reboot on exception
wmi:eadd new command WMI_REG_RMW_CMDID
remove transfer type patches for EP3 and EP4
k2_fw_usb_api: workaround for EP4 bug.
k2_fw_usb_api: prevent buffer overflow.
k2_fw_usb_api: fix typo in usb reg address
k2_fw_usb_api: add delay after mac reset
simplify STBC handling
This has been tested on both AR7010 and AR9271 devices.
Signed-off-by: Adrian Chadd <adrian@FreeBSD.org> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Adrian Chadd [Wed, 4 Mar 2015 18:06:34 +0000 (10:06 -0800)]
Add v1.4.0 firmware for ath9k_htc.
This fixes a variety of issues, including but not limited to:
ath9k_htc_firmware: check only the mesh control present subfield
Fix: bug in extend_tsf near 0x8000000 values
FIX: support rstamps from the future too.
Firmware sometimes returns erroneous timestamps(2)
Fixed incorrect wrapping handling in ath_extend_tsf().
Firmware sometimes returns erroneous timestamps
Added proper synchronization while handling lower 32 bit and
upper 32 bit parts in ar5416GetTsf64().
Fix resetting of txstatus flags.
Fix Array Out of Bounds in rcSibUpdate_ht()
ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame
init.c: do cold reboot on exception
wmi:eadd new command WMI_REG_RMW_CMDID
remove transfer type patches for EP3 and EP4
k2_fw_usb_api: workaround for EP4 bug.
k2_fw_usb_api: prevent buffer overflow.
k2_fw_usb_api: fix typo in usb reg address
k2_fw_usb_api: add delay after mac reset
simplify STBC handling
This has been tested on both AR7010 and AR9271 devices.
Rasesh Mody [Wed, 18 Feb 2015 00:10:20 +0000 (19:10 -0500)]
linux-firmware: Add QLogic BR Series Adapter Firmware
This patch rebrands the BFA/BNA inbox driver firmwares.
This patch adds 3.2.5.1 firmware files for QLogic BR-series Adapters that will
be used with the inbox drivers(BFA and BNA).
Avinash Patil [Tue, 27 Jan 2015 10:32:53 +0000 (16:02 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p112
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p112
Bluetooth (SDIO) firmware version: 15.28.4.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p112
Bluetooth (USB) firmware version: 15.28.4.p112
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Avinash Patil [Wed, 17 Dec 2014 12:12:07 +0000 (17:42 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p106
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p106
Bluetooth (SDIO) firmware version: 15.28.4.p106
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p106
Bluetooth (USB) firmware version: 15.28.4.p106
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
projects / thirdparty / linux-firmware.git / log
