- 'for_each_card_auxs'
- 'for_each_card_auxs_safe'
- 'for_each_card_components'
+ - 'for_each_card_dapms'
- 'for_each_card_pre_auxs'
- 'for_each_card_prelinks'
- 'for_each_card_rtds'
- 'for_each_card_rtds_safe'
+ - 'for_each_card_widgets'
+ - 'for_each_card_widgets_safe'
- 'for_each_cgroup_storage_type'
- 'for_each_child_of_node'
- 'for_each_clear_bit'
- 'for_each_cpu_and'
- 'for_each_cpu_not'
- 'for_each_cpu_wrap'
+ - 'for_each_dapm_widgets'
- 'for_each_dev_addr'
- 'for_each_dev_scope'
- 'for_each_displayid_db'
- 'for_each_dpcm_fe'
- 'for_each_drhd_unit'
- 'for_each_dss_dev'
- - 'for_each_efi_handle'
- 'for_each_efi_memory_desc'
- 'for_each_efi_memory_desc_in_map'
- 'for_each_element'
- 'for_each_ip_tunnel_rcu'
- 'for_each_irq_nr'
- 'for_each_link_codecs'
+ - 'for_each_link_cpus'
- 'for_each_link_platforms'
- 'for_each_lru'
- 'for_each_matching_node'
- 'for_each_pci_bridge'
- 'for_each_pci_dev'
- 'for_each_pci_msi_entry'
+ - 'for_each_pcm_streams'
- 'for_each_populated_zone'
- 'for_each_possible_cpu'
- 'for_each_present_cpu'
- 'for_each_property_of_node'
- 'for_each_registered_fb'
- 'for_each_reserved_mem_region'
- - 'for_each_rtd_codec_dai'
- - 'for_each_rtd_codec_dai_rollback'
+ - 'for_each_rtd_codec_dais'
+ - 'for_each_rtd_codec_dais_rollback'
- 'for_each_rtd_components'
+ - 'for_each_rtd_cpu_dais'
+ - 'for_each_rtd_cpu_dais_rollback'
+ - 'for_each_rtd_dais'
- 'for_each_set_bit'
- 'for_each_set_bit_from'
- 'for_each_set_clump8'
- 'klp_for_each_object'
- 'klp_for_each_object_safe'
- 'klp_for_each_object_static'
+ - 'kunit_suite_for_each_test_case'
- 'kvm_for_each_memslot'
- 'kvm_for_each_vcpu'
- 'list_for_each'
- 'of_property_for_each_string'
- 'of_property_for_each_u32'
- 'pci_bus_for_each_resource'
+ - 'pcm_for_each_format'
- 'ping_portaddr_for_each_entry'
- 'plist_for_each'
- 'plist_for_each_continue'
MacroBlockBegin: ''
MacroBlockEnd: ''
MaxEmptyLinesToKeep: 1
-NamespaceIndentation: Inner
+NamespaceIndentation: None
#ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
ObjCBlockIndentWidth: 8
ObjCSpaceAfterProperty: true
usbcore.old_scheme_first=
[USB] Start with the old device initialization
- scheme, applies only to low and full-speed devices
- (default 0 = off).
+ scheme (default 0 = off).
usbcore.usbfs_memory_mb=
[USB] Memory limit (in MB) for buffers allocated by
Version 1 of the Activity Monitors architecture implements a counter group
of four fixed and architecturally defined 64-bit event counters.
- - CPU cycle counter: increments at the frequency of the CPU.
- - Constant counter: increments at the fixed frequency of the system
- clock.
- - Instructions retired: increments with every architecturally executed
- instruction.
- - Memory stall cycles: counts instruction dispatch stall cycles caused by
- misses in the last level cache within the clock domain.
+
+- CPU cycle counter: increments at the frequency of the CPU.
+- Constant counter: increments at the fixed frequency of the system
+ clock.
+- Instructions retired: increments with every architecturally executed
+ instruction.
+- Memory stall cycles: counts instruction dispatch stall cycles caused by
+ misses in the last level cache within the clock domain.
When in WFI or WFE these counters do not increment.
Firmware (code running at higher exception levels, e.g. arm-tf) support is
needed to:
- - Enable access for lower exception levels (EL2 and EL1) to the AMU
- registers.
- - Enable the counters. If not enabled these will read as 0.
- - Save/restore the counters before/after the CPU is being put/brought up
- from the 'off' power state.
+
+- Enable access for lower exception levels (EL2 and EL1) to the AMU
+ registers.
+- Enable the counters. If not enabled these will read as 0.
+- Save/restore the counters before/after the CPU is being put/brought up
+ from the 'off' power state.
When using kernels that have this feature enabled but boot with broken
firmware the user may experience panics or lockups when accessing the
The fixed counters of AMUv1 are accessible though the following system
register definitions:
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+- SYS_AMEVCNTR0_CORE_EL0
+- SYS_AMEVCNTR0_CONST_EL0
+- SYS_AMEVCNTR0_INST_RET_EL0
+- SYS_AMEVCNTR0_MEM_STALL_EL0
Auxiliary platform specific counters can be accessed using
SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
----------------
Currently, access from userspace to the AMU registers is disabled due to:
- - Security reasons: they might expose information about code executed in
- secure mode.
- - Purpose: AMU counters are intended for system management use.
+
+- Security reasons: they might expose information about code executed in
+ secure mode.
+- Purpose: AMU counters are intended for system management use.
Also, the presence of the feature is not visible to userspace.
Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
guest side is disabled due to:
- - Security reasons: they might expose information about code executed
- by other guests or the host.
+
+- Security reasons: they might expose information about code executed
+ by other guests or the host.
Any attempt to access the AMU registers will result in an UNDEFINED
exception being injected into the guest.
DT_DOC_CHECKER ?= dt-doc-validate
DT_EXTRACT_EX ?= dt-extract-example
DT_MK_SCHEMA ?= dt-mk-schema
+DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
quiet_cmd_chk_binding = CHKDT $(patsubst $(srctree)/%,%,$<)
cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
# Use full schemas when checking %.example.dts
DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml
+find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+ -name 'processed-schema*' ! \
+ -name '*.example.dt.yaml' \)
+
quiet_cmd_mk_schema = SCHEMA $@
- cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
+ cmd_mk_schema = rm -f $@ ; \
+ $(if $(DT_MK_SCHEMA_FLAGS), \
+ echo $(real-prereqs), \
+ $(find_cmd)) | \
+ xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@
-DT_DOCS = $(addprefix $(src)/, \
- $(shell \
- cd $(srctree)/$(src) && \
- find * \( -name '*.yaml' ! \
- -name 'processed-schema*' ! \
- -name '*.example.dt.yaml' \) \
- ))
+DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
DT_SCHEMA_FILES ?= $(DT_DOCS)
$(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE
$(call if_changed,mk_schema)
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
$(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE
$(call if_changed,mk_schema)
dsi {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0xff450000 0x1000>;
panel@0 {
compatible = "leadtek,ltk500hd1829";
If set, reverse the bit order described in the data mappings below on all
data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+ port: true
+ ports: true
+
required:
- compatible
- data-mapping
- width-mm
- height-mm
- panel-timing
- - port
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
...
dsi {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0xff450000 0x1000>;
panel@0 {
compatible = "xinpeng,xpp055c272";
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#"
+$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: STMicroelectronics STM32 ADC bindings
additionalProperties: false
- additionalProperties: false
-
additionalProperties: false
required:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 63
- default: 0
+ default: 32
qcom,charge-ctrl-value:
description:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 3
- default: 2
+ default: 0
qcom,preemphasis-width:
description:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 3
- default: 0
+ default: 1
required:
- compatible
type: object
additionalProperties: false
- additionalProperties: false
required:
- compatible
description: |
disables over voltage protection of this buck
- additionalProperties: false
+ unevaluatedProperties: false
+
additionalProperties: false
required:
description:
should be "ldo1", ..., "ldo7"
+ unevaluatedProperties: false
+
"^BUCK[1-7]$":
type: object
allOf:
required:
- regulator-name
- additionalProperties: false
+
+ unevaluatedProperties: false
+
additionalProperties: false
description:
should be "ldo1", ..., "ldo7"
+ unevaluatedProperties: false
+
"^BUCK[1-8]$":
type: object
allOf:
required:
- regulator-name
- additionalProperties: false
+
+ unevaluatedProperties: false
+
additionalProperties: false
description:
should be "ldo1", ..., "ldo6"
+ unevaluatedProperties: false
+
"^BUCK[1-6]$":
type: object
allOf:
required:
- regulator-name
- additionalProperties: false
+
+ unevaluatedProperties: false
+
additionalProperties: false
- const: tx
- const: rx
+ power-domains:
+ maxItems: 1
+
rockchip,capture-channels:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
+++ /dev/null
-* Rockchip SPDIF transceiver
-
-The S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-- compatible: should be one of the following:
- - "rockchip,rk3066-spdif"
- - "rockchip,rk3188-spdif"
- - "rockchip,rk3228-spdif"
- - "rockchip,rk3288-spdif"
- - "rockchip,rk3328-spdif"
- - "rockchip,rk3366-spdif"
- - "rockchip,rk3368-spdif"
- - "rockchip,rk3399-spdif"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: should contain the SPDIF interrupt.
-- dmas: DMA specifiers for tx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should be "tx"
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
- in clock-names.
-- clock-names: should contain following:
- - "hclk": clock for SPDIF controller
- - "mclk" : clock for SPDIF bus
-
-Required properties on RK3288:
- - rockchip,grf: the phandle of the syscon node for the general register
- file (GRF)
-
-Example for the rk3188 SPDIF controller:
-
-spdif: spdif@1011e000 {
- compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
- reg = <0x1011e000 0x2000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dmac1_s 8>;
- dma-names = "tx";
- clock-names = "hclk", "mclk";
- clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
- #sound-dai-cells = <0>;
-};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPDIF transceiver
+
+description:
+ The S/PDIF audio block is a stereo transceiver that allows the
+ processor to receive and transmit digital audio via a coaxial or
+ fibre cable.
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3066-spdif
+ - const: rockchip,rk3228-spdif
+ - const: rockchip,rk3328-spdif
+ - const: rockchip,rk3366-spdif
+ - const: rockchip,rk3368-spdif
+ - const: rockchip,rk3399-spdif
+ - items:
+ - enum:
+ - rockchip,rk3188-spdif
+ - rockchip,rk3288-spdif
+ - const: rockchip,rk3066-spdif
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: clock for SPDIF bus
+ - description: clock for SPDIF controller
+
+ clock-names:
+ items:
+ - const: mclk
+ - const: hclk
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: tx
+
+ power-domains:
+ maxItems: 1
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of the syscon node for the GRF register.
+ Required property on RK3288.
+
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+ - "#sound-dai-cells"
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-spdif
+
+then:
+ required:
+ - rockchip,grf
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3188-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ spdif: spdif@1011e000 {
+ compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+ reg = <0x1011e000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+ clock-names = "mclk", "hclk";
+ dmas = <&dmac1_s 8>;
+ dma-names = "tx";
+ #sound-dai-cells = <0>;
+ };
- renesas,r8a774c0-usb3-peri # RZ/G2E
- renesas,r8a7795-usb3-peri # R-Car H3
- renesas,r8a7796-usb3-peri # R-Car M3-W
+ - renesas,r8a77961-usb3-peri # R-Car M3-W+
- renesas,r8a77965-usb3-peri # R-Car M3-N
- renesas,r8a77990-usb3-peri # R-Car E3
- const: renesas,rcar-gen3-usb3-peri
- renesas,usbhs-r8a774c0 # RZ/G2E
- renesas,usbhs-r8a7795 # R-Car H3
- renesas,usbhs-r8a7796 # R-Car M3-W
+ - renesas,usbhs-r8a77961 # R-Car M3-W+
- renesas,usbhs-r8a77965 # R-Car M3-N
- renesas,usbhs-r8a77990 # R-Car E3
- renesas,usbhs-r8a77995 # R-Car D3
- "renesas,xhci-r8a7791" for r8a7791 SoC
- "renesas,xhci-r8a7793" for r8a7793 SoC
- "renesas,xhci-r8a7795" for r8a7795 SoC
- - "renesas,xhci-r8a7796" for r8a7796 SoC
+ - "renesas,xhci-r8a7796" for r8a77960 SoC
+ - "renesas,xhci-r8a77961" for r8a77961 SoC
- "renesas,xhci-r8a77965" for r8a77965 SoC
- "renesas,xhci-r8a77990" for r8a77990 SoC
- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
struct dentry *parent, u8 *value);
void debugfs_create_u16(const char *name, umode_t mode,
struct dentry *parent, u16 *value);
- struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent, u32 *value);
+ void debugfs_create_u32(const char *name, umode_t mode,
+ struct dentry *parent, u32 *value);
void debugfs_create_u64(const char *name, umode_t mode,
struct dentry *parent, u64 *value);
will be displayed with "make KBUILD_VERBOSE=0".
---- 6.9 Preprocessing linker scripts
+6.9 Preprocessing linker scripts
+--------------------------------
When the vmlinux image is built, the linker script
arch/$(ARCH)/kernel/vmlinux.lds is used.
reduces overall throughput, in such case you should disable it.
Default: 1
+ping_group_range - 2 INTEGERS
+ Restrict ICMP_PROTO datagram sockets to users in the group range.
+ The default is "1 0", meaning, that nobody (not even root) may
+ create ping sockets. Setting it to "100 100" would grant permissions
+ to the single group. "0 4294967295" would enable it for the world, "100
+ 4294967295" would enable it for the users, but not daemons.
+
tcp_early_demux - BOOLEAN
Enable early demux for established TCP sockets.
Default: 1
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
F: Documentation/driver-api/80211/cfg80211.rst
ADM8211 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
F: drivers/net/wireless/admtek/adm8211.*
ADP1653 FLASH CONTROLLER DRIVER
F: drivers/input/misc/adxl34x.c
ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <michael.hennerich@analog.com>
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
F: drivers/net/ethernet/amd/xgbe/
ANALOG DEVICES INC AD5686 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/iio/dac/ad5696*
ANALOG DEVICES INC AD5758 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/iio/adc/ad7091r5.c
ANALOG DEVICES INC AD7124 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/iio/adc/ad7292.c
ANALOG DEVICES INC AD7606 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
M: Beniamin Bia <beniamin.bia@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
F: drivers/iio/adc/ad7606.c
ANALOG DEVICES INC AD7768-1 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/hwmon/adm1177.c
ANALOG DEVICES INC ADP5061 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
ANALOG DEVICES INC IIO DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de>
M: Michael Hennerich <Michael.Hennerich@analog.com>
-M: Stefan Popa <stefan.popa@analog.com>
S: Supported
W: http://wiki.analog.com/
W: http://ez.analog.com/community/linux-device-drivers
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/ath5k
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath5k
F: drivers/net/wireless/ath/ath5k/
ATHEROS ATH6KL WIRELESS DRIVER
M: Kalle Valo <kvalo@codeaurora.org>
L: linux-wireless@vger.kernel.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/ath6kl
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath6kl
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: drivers/net/wireless/ath/ath6kl/
L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org
S: Odd Fixes
-W: http://wireless.kernel.org/en/users/Drivers/b43
+W: https://wireless.wiki.kernel.org/en/users/Drivers/b43
F: drivers/net/wireless/broadcom/b43/
B43LEGACY WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/b43
+W: https://wireless.wiki.kernel.org/en/users/Drivers/b43
F: drivers/net/wireless/broadcom/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/carl9170
+W: https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
F: drivers/net/wireless/ath/carl9170/
CAVIUM I2C DRIVER
F: drivers/soc/fsl/dpio
DPAA2 ETHERNET DRIVER
+M: Ioana Ciornei <ioana.ciornei@nxp.com>
M: Ioana Radulescu <ruxandra.radulescu@nxp.com>
L: netdev@vger.kernel.org
S: Maintained
M: Janosch Frank <frankja@linux.ibm.com>
R: David Hildenbrand <david@redhat.com>
R: Cornelia Huck <cohuck@redhat.com>
+R: Claudio Imbrenda <imbrenda@linux.ibm.com>
L: kvm@vger.kernel.org
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
F: include/uapi/linux/keyctl.h
F: security/keys/
+KFIFO
+M: Stefani Seibold <stefani@seibold.net>
+S: Maintained
+F: include/linux/kfifo.h
+F: lib/kfifo.c
+F: samples/kfifo/
+
KGDB / KDB /debug_core
M: Jason Wessel <jason.wessel@windriver.com>
M: Daniel Thompson <daniel.thompson@linaro.org>
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
F: Documentation/networking/mac80211-injection.txt
M: Felix Fietkau <nbd@nbd.name>
M: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
R: Ryder Lee <ryder.lee@mediatek.com>
-R: Roy Luo <royluo@google.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/mediatek/mt76/
ORINOCO DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/en/users/Drivers/orinoco
+W: https://wireless.wiki.kernel.org/en/users/Drivers/orinoco
W: http://www.nongnu.org/orinoco/
F: drivers/net/wireless/intersil/orinoco/
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/en/users/Drivers/p54
+W: https://wireless.wiki.kernel.org/en/users/Drivers/p54
F: drivers/net/wireless/intersil/p54/
PACKING
PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-R: Andrew Murray <amurray@thegoodpenguin.co.uk>
+R: Rob Herring <robh@kernel.org>
L: linux-pci@vger.kernel.org
S: Supported
Q: http://patchwork.ozlabs.org/project/linux-pci/list/
M: Luis Chamberlain <mcgrof@kernel.org>
L: linux-wireless@vger.kernel.org
S: Obsolete
-W: http://wireless.kernel.org/en/users/Drivers/p54
+W: https://wireless.wiki.kernel.org/en/users/Drivers/p54
F: drivers/net/wireless/intersil/prism54/
PROC FILESYSTEM
M: Kalle Valo <kvalo@codeaurora.org>
L: ath10k@lists.infradead.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/ath10k
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: drivers/net/wireless/ath/ath10k/
M: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/ath9k
+W: https://wireless.wiki.kernel.org/en/users/Drivers/ath9k
F: drivers/net/wireless/ath/ath9k/
QUALCOMM CAMERA SUBSYSTEM DRIVER
M: Kalle Valo <kvalo@codeaurora.org>
L: wcn36xx@lists.infradead.org
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/wcn36xx
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wcn36xx
T: git git://github.com/KrasnikovEugene/wcn36xx.git
F: drivers/net/wireless/ath/wcn36xx/
QUANTENNA QTNFMAC WIRELESS DRIVER
M: Igor Mitsyanko <imitsyanko@quantenna.com>
-M: Avinash Patil <avinashp@quantenna.com>
M: Sergey Matyukevich <smatyukevich@quantenna.com>
L: linux-wireless@vger.kernel.org
S: Maintained
M: Ping-Ke Shih <pkshih@realtek.com>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/realtek/rtlwifi/
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
F: Documentation/ABI/stable/sysfs-class-rfkill
RTL8180 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/realtek/rtl818x/rtl8180/
M: Larry Finger <Larry.Finger@lwfinger.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-W: http://wireless.kernel.org/
+W: https://wireless.wiki.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
F: drivers/net/wireless/realtek/rtl818x/rtl8187/
TI WILINK WIRELESS DRIVERS
L: linux-wireless@vger.kernel.org
S: Orphan
-W: http://wireless.kernel.org/en/users/Drivers/wl12xx
-W: http://wireless.kernel.org/en/users/Drivers/wl1251
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wl12xx
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wl1251
T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
F: drivers/net/wireless/ti/
F: include/linux/wl12xx.h
L: linux-wireless@vger.kernel.org
L: wil6210@qti.qualcomm.com
S: Supported
-W: http://wireless.kernel.org/en/users/Drivers/wil6210
+W: https://wireless.wiki.kernel.org/en/users/Drivers/wil6210
F: drivers/net/wireless/ath/wil6210/
WIMAX STACK
VERSION = 5
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
-
*/
#ifndef _ASM_ARC_MODULE_H
const char *secstr;
};
-#define MODULE_PROC_FAMILY "ARC700"
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
#endif /* _ASM_ARC_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "ARC700"
+
+#endif /* _ASM_VERMAGIC_H */
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
mboxes = <&mailbox>;
dma-ranges;
};
"dsi0_ddr2",
"dsi0_ddr";
+ status = "disabled";
};
aux: aux@7e215000 {
status = "disabled";
};
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+ status = "disabled";
+};
+
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
struct module;
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
-/*
- * Add the ARM architecture version to the version magic string
- */
-#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
-
-/* Add __virt_to_phys patching state as well */
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#else
-#define MODULE_ARCH_VERMAGIC_P2V ""
-#endif
-
-/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
-#ifdef CONFIG_THUMB2_KERNEL
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
-#else
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
- MODULE_ARCH_VERMAGIC_ARMVSN \
- MODULE_ARCH_VERMAGIC_ARMTHUMB \
- MODULE_ARCH_VERMAGIC_P2V
-
#ifdef CONFIG_THUMB2_KERNEL
#define HAVE_ARCH_KALLSYMS_SYMBOL_VALUE
static inline unsigned long kallsyms_symbol_value(const Elf_Sym *sym)
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+/*
+ * Add the ARM architecture version to the version magic string
+ */
+#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+/* Add __virt_to_phys patching state as well */
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
+#else
+#define MODULE_ARCH_VERMAGIC_P2V ""
+#endif
+
+/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
+#ifdef CONFIG_THUMB2_KERNEL
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
+#else
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_ARCH_VERMAGIC_ARMVSN \
+ MODULE_ARCH_VERMAGIC_ARMTHUMB \
+ MODULE_ARCH_VERMAGIC_P2V
+
+#endif /* _ASM_VERMAGIC_H */
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
+ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
+endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
#include <asm-generic/module.h>
-#define MODULE_ARCH_VERMAGIC "aarch64"
-
#ifdef CONFIG_ARM64_MODULE_PLTS
struct mod_plt_sec {
int plt_shndx;
get_random_bytes(&keys->apga, sizeof(keys->apga));
}
-#define __ptrauth_key_install(k, v) \
+#define __ptrauth_key_install_nosync(k, v) \
do { \
struct ptrauth_key __pki_v = (v); \
write_sysreg_s(__pki_v.lo, SYS_ ## k ## KEYLO_EL1); \
static __always_inline void ptrauth_keys_switch_kernel(struct ptrauth_keys_kernel *keys)
{
- if (system_supports_address_auth())
- __ptrauth_key_install(APIA, keys->apia);
+ if (!system_supports_address_auth())
+ return;
+
+ __ptrauth_key_install_nosync(APIA, keys->apia);
+ isb();
}
extern int ptrauth_prctl_reset_keys(struct task_struct *tsk, unsigned long arg);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "aarch64"
+
+#endif /* _ASM_VERMAGIC_H */
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
* Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
*/
-#ifndef _ASM_MODULE_H
-#define _ASM_MODULE_H
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
-#include <asm-generic/module.h>
+#include <linux/stringify.h>
#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
-#endif
+#endif /* _ASM_VERMAGIC_H */
unsigned int next_got_entry; /* index of next available got entry */
};
-#define MODULE_PROC_FAMILY "ia64"
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY \
- "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
-
#define ARCH_SHF_SMALL SHF_IA_64_SHORT
#endif /* _ASM_IA64_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+#define MODULE_ARCH_VERMAGIC "ia64" \
+ "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
+
+#endif /* _ASM_VERMAGIC_H */
}
#endif
-#ifdef CONFIG_CPU_BMIPS
-#define MODULE_PROC_FAMILY "BMIPS "
-#elif defined CONFIG_CPU_MIPS32_R1
-#define MODULE_PROC_FAMILY "MIPS32_R1 "
-#elif defined CONFIG_CPU_MIPS32_R2
-#define MODULE_PROC_FAMILY "MIPS32_R2 "
-#elif defined CONFIG_CPU_MIPS32_R6
-#define MODULE_PROC_FAMILY "MIPS32_R6 "
-#elif defined CONFIG_CPU_MIPS64_R1
-#define MODULE_PROC_FAMILY "MIPS64_R1 "
-#elif defined CONFIG_CPU_MIPS64_R2
-#define MODULE_PROC_FAMILY "MIPS64_R2 "
-#elif defined CONFIG_CPU_MIPS64_R6
-#define MODULE_PROC_FAMILY "MIPS64_R6 "
-#elif defined CONFIG_CPU_R3000
-#define MODULE_PROC_FAMILY "R3000 "
-#elif defined CONFIG_CPU_TX39XX
-#define MODULE_PROC_FAMILY "TX39XX "
-#elif defined CONFIG_CPU_VR41XX
-#define MODULE_PROC_FAMILY "VR41XX "
-#elif defined CONFIG_CPU_R4X00
-#define MODULE_PROC_FAMILY "R4X00 "
-#elif defined CONFIG_CPU_TX49XX
-#define MODULE_PROC_FAMILY "TX49XX "
-#elif defined CONFIG_CPU_R5000
-#define MODULE_PROC_FAMILY "R5000 "
-#elif defined CONFIG_CPU_R5500
-#define MODULE_PROC_FAMILY "R5500 "
-#elif defined CONFIG_CPU_NEVADA
-#define MODULE_PROC_FAMILY "NEVADA "
-#elif defined CONFIG_CPU_R10000
-#define MODULE_PROC_FAMILY "R10000 "
-#elif defined CONFIG_CPU_RM7000
-#define MODULE_PROC_FAMILY "RM7000 "
-#elif defined CONFIG_CPU_SB1
-#define MODULE_PROC_FAMILY "SB1 "
-#elif defined CONFIG_CPU_LOONGSON32
-#define MODULE_PROC_FAMILY "LOONGSON32 "
-#elif defined CONFIG_CPU_LOONGSON2EF
-#define MODULE_PROC_FAMILY "LOONGSON2EF "
-#elif defined CONFIG_CPU_LOONGSON64
-#define MODULE_PROC_FAMILY "LOONGSON64 "
-#elif defined CONFIG_CPU_CAVIUM_OCTEON
-#define MODULE_PROC_FAMILY "OCTEON "
-#elif defined CONFIG_CPU_XLR
-#define MODULE_PROC_FAMILY "XLR "
-#elif defined CONFIG_CPU_XLP
-#define MODULE_PROC_FAMILY "XLP "
-#else
-#error MODULE_PROC_FAMILY undefined for your processor configuration
-#endif
-
-#ifdef CONFIG_32BIT
-#define MODULE_KERNEL_TYPE "32BIT "
-#elif defined CONFIG_64BIT
-#define MODULE_KERNEL_TYPE "64BIT "
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
- MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
-
#endif /* _ASM_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_BMIPS
+#define MODULE_PROC_FAMILY "BMIPS "
+#elif defined CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1 "
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS32_R6
+#define MODULE_PROC_FAMILY "MIPS32_R6 "
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1 "
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_MIPS64_R6
+#define MODULE_PROC_FAMILY "MIPS64_R6 "
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000 "
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX "
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX "
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00 "
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX "
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000 "
+#elif defined CONFIG_CPU_R5500
+#define MODULE_PROC_FAMILY "R5500 "
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA "
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000 "
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000 "
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON32
+#define MODULE_PROC_FAMILY "LOONGSON32 "
+#elif defined CONFIG_CPU_LOONGSON2EF
+#define MODULE_PROC_FAMILY "LOONGSON2EF "
+#elif defined CONFIG_CPU_LOONGSON64
+#define MODULE_PROC_FAMILY "LOONGSON64 "
+#elif defined CONFIG_CPU_CAVIUM_OCTEON
+#define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_XLR
+#define MODULE_PROC_FAMILY "XLR "
+#elif defined CONFIG_CPU_XLP
+#define MODULE_PROC_FAMILY "XLP "
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
+
+#endif /* _ASM_VERMAGIC_H */
/* SPDX-License-Identifier: GPL-2.0 */
// Copyright (C) 2005-2017 Andes Technology Corporation
-#ifndef _ASM_NDS32_MODULE_H
-#define _ASM_NDS32_MODULE_H
-
-#include <asm-generic/module.h>
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
#define MODULE_ARCH_VERMAGIC "NDS32v3"
-#endif /* _ASM_NDS32_MODULE_H */
+#endif /* _ASM_VERMAGIC_H */
#define _ASM_POWERPC_MODULE_H
#ifdef __KERNEL__
-/*
- */
-
#include <linux/list.h>
#include <asm/bug.h>
#include <asm-generic/module.h>
-
-#ifdef CONFIG_MPROFILE_KERNEL
-#define MODULE_ARCH_VERMAGIC_FTRACE "mprofile-kernel "
-#else
-#define MODULE_ARCH_VERMAGIC_FTRACE ""
-#endif
-
-#ifdef CONFIG_RELOCATABLE
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE "relocatable "
-#else
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE ""
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
-
#ifndef __powerpc64__
/*
* Thanks to Paul M for explaining this.
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_MPROFILE_KERNEL
+#define MODULE_ARCH_VERMAGIC_FTRACE "mprofile-kernel "
+#else
+#define MODULE_ARCH_VERMAGIC_FTRACE ""
+#endif
+
+#ifdef CONFIG_RELOCATABLE
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE "relocatable "
+#else
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
+
+#endif /* _ASM_VERMAGIC_H */
stw r10,_CCR(r1)
stw r1,KSP(r3) /* Set old stack pointer */
- kuap_check r2, r4
+ kuap_check r2, r0
#ifdef CONFIG_SMP
/* We need a sync somewhere here to make sure that if the
* previous task gets rescheduled on another CPU, it sees all
lsizep = of_get_property(np, propnames[3], NULL);
if (bsizep == NULL)
bsizep = lsizep;
+ if (lsizep == NULL)
+ lsizep = bsizep;
if (lsizep != NULL)
lsize = be32_to_cpu(*lsizep);
if (bsizep != NULL)
*/
local_irq_disable();
ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+ pte = __pte(0);
+ if (ptep)
+ pte = *ptep;
+ local_irq_enable();
/*
* If the PTE disappeared temporarily due to a THP
* collapse, just return and let the guest try again.
*/
- if (!ptep) {
- local_irq_enable();
+ if (!pte_present(pte)) {
if (page)
put_page(page);
return RESUME_GUEST;
}
- pte = *ptep;
- local_irq_enable();
hpa = pte_pfn(pte) << PAGE_SHIFT;
pte_size = PAGE_SIZE;
if (shift)
*/
local_irq_disable();
ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+ pte = __pte(0);
+ if (ptep)
+ pte = *ptep;
+ local_irq_enable();
/*
* If the PTE disappeared temporarily due to a THP
* collapse, just return and let the guest try again.
*/
- if (!ptep) {
- local_irq_enable();
+ if (!pte_present(pte)) {
if (page)
put_page(page);
return RESUME_GUEST;
}
- pte = *ptep;
- local_irq_enable();
/* If we're logging dirty pages, always map single pages */
large_enable = !(memslot->flags & KVM_MEM_LOG_DIRTY_PAGES);
mmu_mapin_ram_chunk(etext8, einittext8, PAGE_KERNEL);
}
}
+ _tlbil_all();
}
#ifdef CONFIG_STRICT_KERNEL_RWX
~(LARGE_PAGE_SIZE_8M - 1)));
mmu_patch_addis(&patch__dtlbmiss_romem_top, -__pa(_sinittext));
+ _tlbil_all();
+
/* Update page tables for PTDUMP and BDI */
mmu_mapin_ram_chunk(0, sinittext, __pgprot(0));
mmu_mapin_ram_chunk(0, etext, PAGE_KERNEL_ROX);
config PPC_KUAP_DEBUG
bool "Extra debugging for Kernel Userspace Access Protection"
- depends on PPC_KUAP && (PPC_RADIX_MMU || PPC_32)
+ depends on PPC_KUAP && (PPC_RADIX_MMU || PPC32)
help
Add extra debugging for Kernel Userspace Access Protection (KUAP)
If you're unsure, say N.
#include <asm-generic/module.h>
-#define MODULE_ARCH_VERMAGIC "riscv"
-
struct module;
unsigned long module_emit_got_entry(struct module *mod, unsigned long val);
unsigned long module_emit_plt_entry(struct module *mod, unsigned long val);
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2017 Andes Technology Corporation */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "riscv"
+
+#endif /* _ASM_VERMAGIC_H */
#ifdef CONFIG_PROTECTED_VIRTUALIZATION_GUEST
int __bootdata_preserved(prot_virt_guest);
#endif
-#if IS_ENABLED(CONFIG_KVM)
struct uv_info __bootdata_preserved(uv_info);
-#endif
void uv_query_info(void)
{
}
EXPORT_SYMBOL(diag_stat_inc);
-void diag_stat_inc_norecursion(enum diag_stat_enum nr)
+void notrace diag_stat_inc_norecursion(enum diag_stat_enum nr)
{
this_cpu_inc(diag_stat.counter[nr]);
trace_s390_diagnose_norecursion(diag_map[nr].code);
return -1;
}
-bool arch_vcpu_is_preempted(int cpu)
+bool notrace arch_vcpu_is_preempted(int cpu)
{
if (test_cpu_flag_of(CIF_ENABLED_WAIT, cpu))
return false;
}
EXPORT_SYMBOL(arch_vcpu_is_preempted);
-void smp_yield_cpu(int cpu)
+void notrace smp_yield_cpu(int cpu)
{
if (!MACHINE_HAS_DIAG9C)
return;
static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
-void trace_s390_diagnose_norecursion(int diag_nr)
+void notrace trace_s390_diagnose_norecursion(int diag_nr)
{
unsigned long flags;
unsigned int *depth;
int __bootdata_preserved(prot_virt_guest);
#endif
+struct uv_info __bootdata_preserved(uv_info);
+
#if IS_ENABLED(CONFIG_KVM)
int prot_virt_host;
EXPORT_SYMBOL(prot_virt_host);
-struct uv_info __bootdata_preserved(uv_info);
EXPORT_SYMBOL(uv_info);
static int __init prot_virt_setup(char *val)
if (psw_mchk_disabled(vcpu))
active_mask &= ~IRQ_PEND_MCHK_MASK;
/* PV guest cpus can have a single interruption injected at a time. */
- if (kvm_s390_pv_cpu_is_protected(vcpu) &&
+ if (kvm_s390_pv_cpu_get_handle(vcpu) &&
vcpu->arch.sie_block->iictl != IICTL_CODE_NONE)
active_mask &= ~(IRQ_PEND_EXT_II_MASK |
IRQ_PEND_IO_MASK |
start = slot + 1;
}
+ if (start >= slots->used_slots)
+ return slots->used_slots - 1;
+
if (gfn >= memslots[start].base_gfn &&
gfn < memslots[start].base_gfn + memslots[start].npages) {
atomic_set(&slots->lru_slot, start);
{
mm_segment_t old_fs;
unsigned long asce, cr;
+ unsigned long flags;
old_fs = current->thread.mm_segment;
if (old_fs & 1)
return old_fs;
+ /* protect against a concurrent page table upgrade */
+ local_irq_save(flags);
current->thread.mm_segment |= 1;
asce = S390_lowcore.kernel_asce;
if (likely(old_fs == USER_DS)) {
__ctl_load(asce, 7, 7);
set_cpu_flag(CIF_ASCE_SECONDARY);
}
+ local_irq_restore(flags);
return old_fs;
}
EXPORT_SYMBOL(enable_sacf_uaccess);
{
struct mm_struct *mm = arg;
- if (current->active_mm == mm)
- set_user_asce(mm);
+ /* we must change all active ASCEs to avoid the creation of new TLBs */
+ if (current->active_mm == mm) {
+ S390_lowcore.user_asce = mm->context.asce;
+ if (current->thread.mm_segment == USER_DS) {
+ __ctl_load(S390_lowcore.user_asce, 1, 1);
+ /* Mark user-ASCE present in CR1 */
+ clear_cpu_flag(CIF_ASCE_PRIMARY);
+ }
+ if (current->thread.mm_segment == USER_DS_SACF) {
+ __ctl_load(S390_lowcore.user_asce, 7, 7);
+ /* enable_sacf_uaccess does all or nothing */
+ WARN_ON(!test_cpu_flag(CIF_ASCE_SECONDARY));
+ }
+ }
__tlb_flush_local();
}
.name = "PCI-MSI",
.irq_unmask = pci_msi_unmask_irq,
.irq_mask = pci_msi_mask_irq,
- .irq_set_affinity = zpci_set_irq_affinity,
};
static void zpci_handle_cpu_local_irq(bool rescan)
rc = -EIO;
if (hwirq - bit >= msi_vecs)
break;
- irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE, msi->affinity);
+ irq = __irq_alloc_descs(-1, 0, 1, 0, THIS_MODULE,
+ (irq_delivery == DIRECTED) ?
+ msi->affinity : NULL);
if (irq < 0)
return -ENOMEM;
rc = irq_set_msi_desc(irq, msi);
};
#endif
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2LE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3LE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4LE "
-# elif defined CONFIG_CPU_SH5
-# define MODULE_PROC_FAMILY "SH5LE "
-# else
-# error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-# define MODULE_PROC_FAMILY "SH2BE "
-# elif defined CONFIG_CPU_SH3
-# define MODULE_PROC_FAMILY "SH3BE "
-# elif defined CONFIG_CPU_SH4
-# define MODULE_PROC_FAMILY "SH4BE "
-# elif defined CONFIG_CPU_SH5
-# define MODULE_PROC_FAMILY "SH5BE "
-# else
-# error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
#endif /* _ASM_SH_MODULE_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+# define MODULE_PROC_FAMILY "SH2LE "
+# elif defined CONFIG_CPU_SH3
+# define MODULE_PROC_FAMILY "SH3LE "
+# elif defined CONFIG_CPU_SH4
+# define MODULE_PROC_FAMILY "SH4LE "
+# elif defined CONFIG_CPU_SH5
+# define MODULE_PROC_FAMILY "SH5LE "
+# else
+# error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+# define MODULE_PROC_FAMILY "SH2BE "
+# elif defined CONFIG_CPU_SH3
+# define MODULE_PROC_FAMILY "SH3BE "
+# elif defined CONFIG_CPU_SH4
+# define MODULE_PROC_FAMILY "SH4BE "
+# elif defined CONFIG_CPU_SH5
+# define MODULE_PROC_FAMILY "SH5BE "
+# else
+# error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_VERMAGIC_H */
unsigned long nr_pages = size >> PAGE_SHIFT;
int ret;
- if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot)
+ if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
return -EINVAL;
/* We only have ZONE_NORMAL, so this is easy.. */
# When cleaning we don't include .config, so we don't include
# TT or skas makefiles and don't clean skas_ptregs.h.
CLEAN_FILES += linux x.i gmon.out
+MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64
- select HAVE_ARCH_USERFAULTFD_WP if USERFAULTFD
+ select HAVE_ARCH_USERFAULTFD_WP if X86_64 && USERFAULTFD
select HAVE_ARCH_VMAP_STACK if X86_64
select HAVE_ARCH_WITHIN_STACK_FRAMES
select HAVE_ASM_MODVERSIONS
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS, &glm_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, &glm_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT, &glm_cstates),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L, &glm_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L, &icl_cstates),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE, &icl_cstates),
struct page *pg;
input_arg = (void **)this_cpu_ptr(hyperv_pcpu_input_arg);
- pg = alloc_page(GFP_KERNEL);
+ /* hv_cpu_init() can be called with IRQs disabled from hv_resume() */
+ pg = alloc_page(irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
if (unlikely(!pg))
return -ENOMEM;
*input_arg = page_address(pg);
static int hv_suspend(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
+ int ret;
/*
* Reset the hypercall page as it is going to be invalidated
hypercall_msr.enable = 0;
wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
- return 0;
+ ret = hv_cpu_die(0);
+ return ret;
}
static void hv_resume(void)
{
union hv_x64_msr_hypercall_contents hypercall_msr;
+ int ret;
+
+ ret = hv_cpu_init(0);
+ WARN_ON(ret);
/* Re-enable the hypercall page */
rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64);
hv_hypercall_pg_saved = NULL;
}
+/* Note: when the ops are called, only CPU0 is online and IRQs are disabled. */
static struct syscore_ops hv_syscore_ops = {
.suspend = hv_suspend,
.resume = hv_resume,
#endif
};
-#ifdef CONFIG_X86_64
-/* X86_64 does not define MODULE_PROC_FAMILY */
-#elif defined CONFIG_M486SX
-#define MODULE_PROC_FAMILY "486SX "
-#elif defined CONFIG_M486
-#define MODULE_PROC_FAMILY "486 "
-#elif defined CONFIG_M586
-#define MODULE_PROC_FAMILY "586 "
-#elif defined CONFIG_M586TSC
-#define MODULE_PROC_FAMILY "586TSC "
-#elif defined CONFIG_M586MMX
-#define MODULE_PROC_FAMILY "586MMX "
-#elif defined CONFIG_MCORE2
-#define MODULE_PROC_FAMILY "CORE2 "
-#elif defined CONFIG_MATOM
-#define MODULE_PROC_FAMILY "ATOM "
-#elif defined CONFIG_M686
-#define MODULE_PROC_FAMILY "686 "
-#elif defined CONFIG_MPENTIUMII
-#define MODULE_PROC_FAMILY "PENTIUMII "
-#elif defined CONFIG_MPENTIUMIII
-#define MODULE_PROC_FAMILY "PENTIUMIII "
-#elif defined CONFIG_MPENTIUMM
-#define MODULE_PROC_FAMILY "PENTIUMM "
-#elif defined CONFIG_MPENTIUM4
-#define MODULE_PROC_FAMILY "PENTIUM4 "
-#elif defined CONFIG_MK6
-#define MODULE_PROC_FAMILY "K6 "
-#elif defined CONFIG_MK7
-#define MODULE_PROC_FAMILY "K7 "
-#elif defined CONFIG_MK8
-#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_MELAN
-#define MODULE_PROC_FAMILY "ELAN "
-#elif defined CONFIG_MCRUSOE
-#define MODULE_PROC_FAMILY "CRUSOE "
-#elif defined CONFIG_MEFFICEON
-#define MODULE_PROC_FAMILY "EFFICEON "
-#elif defined CONFIG_MWINCHIPC6
-#define MODULE_PROC_FAMILY "WINCHIPC6 "
-#elif defined CONFIG_MWINCHIP3D
-#define MODULE_PROC_FAMILY "WINCHIP3D "
-#elif defined CONFIG_MCYRIXIII
-#define MODULE_PROC_FAMILY "CYRIXIII "
-#elif defined CONFIG_MVIAC3_2
-#define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif defined CONFIG_MVIAC7
-#define MODULE_PROC_FAMILY "VIAC7 "
-#elif defined CONFIG_MGEODEGX1
-#define MODULE_PROC_FAMILY "GEODEGX1 "
-#elif defined CONFIG_MGEODE_LX
-#define MODULE_PROC_FAMILY "GEODE "
-#else
-#error unknown processor family
-#endif
-
-#ifdef CONFIG_X86_32
-# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-#endif
-
#endif /* _ASM_X86_MODULE_H */
rdmsrl(HV_X64_MSR_SINT0 + int_num, val)
#define hv_set_synint_state(int_num, val) \
wrmsrl(HV_X64_MSR_SINT0 + int_num, val)
+#define hv_recommend_using_aeoi() \
+ (!(ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED))
#define hv_get_crash_ctl(val) \
rdmsrl(HV_X64_MSR_CRASH_CTL, val)
extern char __indirect_thunk_start[];
extern char __indirect_thunk_end[];
-/*
- * On VMEXIT we must ensure that no RSB predictions learned in the guest
- * can be followed in the host, by overwriting the RSB completely. Both
- * retpoline and IBRS mitigations for Spectre v2 need this; only on future
- * CPUs with IBRS_ALL *might* it be avoided.
- */
-static inline void vmexit_fill_RSB(void)
-{
-#ifdef CONFIG_RETPOLINE
- unsigned long loops;
-
- asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
- ALTERNATIVE("jmp 910f",
- __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
- X86_FEATURE_RETPOLINE)
- "910:"
- : "=r" (loops), ASM_CALL_CONSTRAINT
- : : "memory" );
-#endif
-}
-
static __always_inline
void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
{
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M486SX
+#define MODULE_PROC_FAMILY "486SX "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_MATOM
+#define MODULE_PROC_FAMILY "ATOM "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_MELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+#else
+# define MODULE_ARCH_VERMAGIC ""
+#endif
+
+#endif /* _ASM_VERMAGIC_H */
*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
}
-static void init_freq_invariance(void);
+static void init_freq_invariance(bool secondary);
/*
* Report back to the Boot Processor during boot time or to the caller processor
*/
set_cpu_sibling_map(raw_smp_processor_id());
- init_freq_invariance();
+ init_freq_invariance(true);
/*
* Get our bogomips.
set_sched_topology(x86_topology);
set_cpu_sibling_map(0);
- init_freq_invariance();
+ init_freq_invariance(false);
smp_sanity_check();
switch (apic_intr_mode) {
int err, i;
u64 msr;
- if (!x86_match_cpu(has_knl_turbo_ratio_limits))
- return false;
-
err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
if (err)
return false;
static bool core_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq)
{
+ u64 msr;
int err;
err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
if (err)
return false;
- err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, turbo_freq);
+ err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, &msr);
if (err)
return false;
- *base_freq = (*base_freq >> 8) & 0xFF; /* max P state */
- *turbo_freq = (*turbo_freq >> 24) & 0xFF; /* 4C turbo */
+ *base_freq = (*base_freq >> 8) & 0xFF; /* max P state */
+ *turbo_freq = (msr >> 24) & 0xFF; /* 4C turbo */
+
+ /* The CPU may have less than 4 cores */
+ if (!*turbo_freq)
+ *turbo_freq = msr & 0xFF; /* 1C turbo */
return true;
}
skx_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
goto out;
- if (knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
+ if (x86_match_cpu(has_knl_turbo_ratio_limits) &&
+ knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
goto out;
if (x86_match_cpu(has_skx_turbo_ratio_limits) &&
return false;
out:
+ /*
+ * Some hypervisors advertise X86_FEATURE_APERFMPERF
+ * but then fill all MSR's with zeroes.
+ */
+ if (!base_freq) {
+ pr_debug("Couldn't determine cpu base frequency, necessary for scale-invariant accounting.\n");
+ return false;
+ }
+
arch_turbo_freq_ratio = div_u64(turbo_freq * SCHED_CAPACITY_SCALE,
base_freq);
arch_set_max_freq_ratio(turbo_disabled());
return true;
}
-static void init_counter_refs(void *arg)
+static void init_counter_refs(void)
{
u64 aperf, mperf;
this_cpu_write(arch_prev_mperf, mperf);
}
-static void init_freq_invariance(void)
+static void init_freq_invariance(bool secondary)
{
bool ret = false;
- if (smp_processor_id() != 0 || !boot_cpu_has(X86_FEATURE_APERFMPERF))
+ if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
return;
+ if (secondary) {
+ if (static_branch_likely(&arch_scale_freq_key)) {
+ init_counter_refs();
+ }
+ return;
+ }
+
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
ret = intel_set_max_freq_ratio();
if (ret) {
- on_each_cpu(init_counter_refs, NULL, 1);
+ init_counter_refs();
static_branch_enable(&arch_scale_freq_key);
} else {
pr_debug("Couldn't determine max cpu frequency, necessary for scale-invariant accounting.\n");
ccflags-y += -Iarch/x86/kvm
ccflags-$(CONFIG_KVM_WERROR) += -Werror
+ifeq ($(CONFIG_FRAME_POINTER),y)
+OBJECT_FILES_NON_STANDARD_vmenter.o := y
+endif
+
KVM := ../../../virt/kvm
kvm-y += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
#include <linux/kernel.h>
#include <linux/highmem.h>
#include <linux/psp-sev.h>
+#include <linux/pagemap.h>
#include <linux/swap.h>
#include "x86.h"
/* Maximum number of encrypted guests supported simultaneously */
max_sev_asid = cpuid_ecx(0x8000001F);
- if (!max_sev_asid)
+ if (!svm_sev_enabled())
return 1;
/* Minimum ASID value that should be used for SEV guest */
void sev_hardware_teardown(void)
{
+ if (!svm_sev_enabled())
+ return;
+
bitmap_free(sev_asid_bitmap);
bitmap_free(sev_reclaim_asid_bitmap);
svm_complete_interrupts(svm);
}
-bool __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
+void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
static void svm_vcpu_run(struct kvm_vcpu *vcpu)
{
*/
x86_spec_ctrl_set_guest(svm->spec_ctrl, svm->virt_spec_ctrl);
- local_irq_enable();
-
__svm_vcpu_run(svm->vmcb_pa, (unsigned long *)&svm->vcpu.arch.regs);
- /* Eliminate branch target predictions from guest mode */
- vmexit_fill_RSB();
-
#ifdef CONFIG_X86_64
wrmsrl(MSR_GS_BASE, svm->host.gs_base);
#else
reload_tss(vcpu);
- local_irq_disable();
-
x86_spec_ctrl_restore_host(svm->spec_ctrl, svm->virt_spec_ctrl);
vcpu->arch.cr2 = svm->vmcb->save.cr2;
mark_all_clean(svm->vmcb);
}
-STACK_FRAME_NON_STANDARD(svm_vcpu_run);
static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
{
#include <asm/asm.h>
#include <asm/bitsperlong.h>
#include <asm/kvm_vcpu_regs.h>
+#include <asm/nospec-branch.h>
#define WORD_SIZE (BITS_PER_LONG / 8)
*/
SYM_FUNC_START(__svm_vcpu_run)
push %_ASM_BP
- mov %_ASM_SP, %_ASM_BP
#ifdef CONFIG_X86_64
push %r15
push %r14
pop %_ASM_AX
/* Enter guest mode */
+ sti
1: vmload %_ASM_AX
jmp 3f
2: cmpb $0, kvm_rebooting
ud2
_ASM_EXTABLE(5b, 6b)
7:
+ cli
+
+#ifdef CONFIG_RETPOLINE
+ /* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
+ FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
+#endif
+
/* "POP" @regs to RAX. */
pop %_ASM_AX
return 1 & (b >> (field & 7));
}
+static bool nested_vmx_exit_handled_mtf(struct vmcs12 *vmcs12)
+{
+ u32 entry_intr_info = vmcs12->vm_entry_intr_info_field;
+
+ if (nested_cpu_has_mtf(vmcs12))
+ return true;
+
+ /*
+ * An MTF VM-exit may be injected into the guest by setting the
+ * interruption-type to 7 (other event) and the vector field to 0. Such
+ * is the case regardless of the 'monitor trap flag' VM-execution
+ * control.
+ */
+ return entry_intr_info == (INTR_INFO_VALID_MASK
+ | INTR_TYPE_OTHER_EVENT);
+}
+
/*
- * Return 1 if we should exit from L2 to L1 to handle an exit, or 0 if we
+ * Return true if we should exit from L2 to L1 to handle an exit, or false if we
* should handle it ourselves in L0 (and then continue L2). Only call this
* when in is_guest_mode (L2).
*/
case EXIT_REASON_MWAIT_INSTRUCTION:
return nested_cpu_has(vmcs12, CPU_BASED_MWAIT_EXITING);
case EXIT_REASON_MONITOR_TRAP_FLAG:
- return nested_cpu_has_mtf(vmcs12);
+ return nested_vmx_exit_handled_mtf(vmcs12);
case EXIT_REASON_MONITOR_INSTRUCTION:
return nested_cpu_has(vmcs12, CPU_BASED_MONITOR_EXITING);
case EXIT_REASON_PAUSE_INSTRUCTION:
*/
static void kvm_machine_check(void)
{
-#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_MCE)
struct pt_regs regs = {
.cs = 3, /* Fake ring 3 no matter what the guest ran on */
.flags = X86_EFLAGS_IF,
case MSR_IA32_PERF_CTL:
case MSR_AMD64_DC_CFG:
case MSR_F15H_EX_CFG:
+ /*
+ * Intel Sandy Bridge CPUs must support the RAPL (running average power
+ * limit) MSRs. Just return 0, as we do not want to expose the host
+ * data here. Do not conditionalize this on CPUID, as KVM does not do
+ * so for existing CPU-specific MSRs.
+ */
+ case MSR_RAPL_POWER_UNIT:
+ case MSR_PP0_ENERGY_STATUS: /* Power plane 0 (core) */
+ case MSR_PP1_ENERGY_STATUS: /* Power plane 1 (graphics uncore) */
+ case MSR_PKG_ENERGY_STATUS: /* Total package */
+ case MSR_DRAM_ENERGY_STATUS: /* DRAM controller */
msr_info->data = 0;
break;
case MSR_F15H_PERF_CTL0 ... MSR_F15H_PERF_CTR5:
r = -EFAULT;
if (copy_from_user(&u.ps, argp, sizeof(u.ps)))
goto out;
+ mutex_lock(&kvm->lock);
r = -ENXIO;
if (!kvm->arch.vpit)
- goto out;
+ goto set_pit_out;
r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+ mutex_unlock(&kvm->lock);
break;
}
case KVM_GET_PIT2: {
r = -EFAULT;
if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
goto out;
+ mutex_lock(&kvm->lock);
r = -ENXIO;
if (!kvm->arch.vpit)
- goto out;
+ goto set_pit2_out;
r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+ mutex_unlock(&kvm->lock);
break;
}
case KVM_REINJECT_CONTROL: {
BIT(BPF_REG_AX));
}
+/*
+ * is_ereg_8l() == true if BPF register 'reg' is mapped to access x86-64
+ * lower 8-bit registers dil,sil,bpl,spl,r8b..r15b, which need extra byte
+ * of encoding. al,cl,dl,bl have simpler encoding.
+ */
+static bool is_ereg_8l(u32 reg)
+{
+ return is_ereg(reg) ||
+ (1 << reg) & (BIT(BPF_REG_1) |
+ BIT(BPF_REG_2) |
+ BIT(BPF_REG_FP));
+}
+
static bool is_axreg(u32 reg)
{
return reg == BPF_REG_0;
switch (size) {
case BPF_B:
/* Emit 'mov byte ptr [rax + off], al' */
- if (is_ereg(dst_reg) || is_ereg(src_reg) ||
- /* We have to add extra byte for x86 SIL, DIL regs */
- src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
+ if (is_ereg(dst_reg) || is_ereg_8l(src_reg))
+ /* Add extra byte for eregs or SIL,DIL,BPL in src_reg */
EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
else
EMIT1(0x88);
case BPF_B:
case BPF_H:
case BPF_W:
- if (!bpf_prog->aux->verifier_zext)
+ if (bpf_prog->aux->verifier_zext)
break;
if (dstk) {
EMIT3(0xC7, add_1reg(0x40, IA32_EBP),
STACK_VAR(dst_hi));
EMIT(0x0, 4);
} else {
- EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
+ /* xor dst_hi,dst_hi */
+ EMIT2(0x33,
+ add_2reg(0xC0, dst_hi, dst_hi));
}
break;
case BPF_DW:
case BPF_JMP | BPF_JSET | BPF_X:
case BPF_JMP32 | BPF_JSET | BPF_X: {
bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
- u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
- u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+ u8 dreg_lo = IA32_EAX;
+ u8 dreg_hi = IA32_EDX;
u8 sreg_lo = sstk ? IA32_ECX : src_lo;
u8 sreg_hi = sstk ? IA32_EBX : src_hi;
add_2reg(0x40, IA32_EBP,
IA32_EDX),
STACK_VAR(dst_hi));
+ } else {
+ /* mov dreg_lo,dst_lo */
+ EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+ if (is_jmp64)
+ /* mov dreg_hi,dst_hi */
+ EMIT2(0x89,
+ add_2reg(0xC0, dreg_hi, dst_hi));
}
if (sstk) {
case BPF_JMP | BPF_JSET | BPF_K:
case BPF_JMP32 | BPF_JSET | BPF_K: {
bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
- u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
- u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+ u8 dreg_lo = IA32_EAX;
+ u8 dreg_hi = IA32_EDX;
u8 sreg_lo = IA32_ECX;
u8 sreg_hi = IA32_EBX;
u32 hi;
add_2reg(0x40, IA32_EBP,
IA32_EDX),
STACK_VAR(dst_hi));
+ } else {
+ /* mov dreg_lo,dst_lo */
+ EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+ if (is_jmp64)
+ /* mov dreg_hi,dst_hi */
+ EMIT2(0x89,
+ add_2reg(0xC0, dreg_hi, dst_hi));
}
/* mov ecx,imm32 */
/*
- * include/asm-xtensa/module.h
- *
- * This file contains the module code specific to the Xtensa architecture.
- *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
-#ifndef _XTENSA_MODULE_H
-#define _XTENSA_MODULE_H
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
-#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
+#include <linux/stringify.h>
+#include <variant/core.h>
-#include <asm-generic/module.h>
+#define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
-#endif /* _XTENSA_MODULE_H */
+#endif /* _ASM_VERMAGIC_H */
vrate_min, vrate_max);
}
- trace_iocost_ioc_vrate_adj(ioc, vrate, &missed_ppm, rq_wait_pct,
+ trace_iocost_ioc_vrate_adj(ioc, vrate, missed_ppm, rq_wait_pct,
nr_lagging, nr_shortages,
nr_surpluses);
ioc->period_us * vrate * INUSE_MARGIN_PCT, 100);
} else if (ioc->busy_level != prev_busy_level || nr_lagging) {
trace_iocost_ioc_vrate_adj(ioc, atomic64_read(&ioc->vtime_rate),
- &missed_ppm, rq_wait_pct, nr_lagging,
+ missed_ppm, rq_wait_pct, nr_lagging,
nr_shortages, nr_surpluses);
}
},
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
},
- {
- /*
- * Asus T200TA, _LID keeps reporting closed after every second
- * openening of the lid. Causing immediate re-suspend after
- * opening every other open. Using LID_INIT_OPEN fixes this.
- */
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
- DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
- },
- .driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
- },
{
/* GP-electronic T701, _LID method points to a floating GPIO */
.matches = {
resource->res.data.extended_irq.polarity =
link->irq.polarity;
if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
- resource->res.data.irq.shareable =
+ resource->res.data.extended_irq.shareable =
ACPI_EXCLUSIVE;
else
- resource->res.data.irq.shareable = ACPI_SHARED;
+ resource->res.data.extended_irq.shareable = ACPI_SHARED;
resource->res.data.extended_irq.interrupt_count = 1;
resource->res.data.extended_irq.interrupts[0] = irq;
/* ignore resource_source, it's optional */
/* PORT_IDMA_CTL bits */
IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */
- IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */
+ IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinery */
IDMA_CTL_GO = (1 << 7), /* IDMA mode go */
IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */
},
{ }
};
-EXPORT_SYMBOL_GPL(firmware_config_table);
#endif
if (is_async(dev)) {
get_device(dev);
- async_schedule(func, dev);
+ async_schedule_dev(func, dev);
return true;
}
char disk_name[DISK_NAME_LEN];
};
+blk_status_t null_process_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector,
+ unsigned int nr_sectors);
+
#ifdef CONFIG_BLK_DEV_ZONED
-int null_zone_init(struct nullb_device *dev);
-void null_zone_exit(struct nullb_device *dev);
+int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q);
+int null_register_zoned_dev(struct nullb *nullb);
+void null_free_zoned_dev(struct nullb_device *dev);
int null_report_zones(struct gendisk *disk, sector_t sector,
unsigned int nr_zones, report_zones_cb cb, void *data);
-blk_status_t null_handle_zoned(struct nullb_cmd *cmd,
- enum req_opf op, sector_t sector,
- sector_t nr_sectors);
+blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector,
+ sector_t nr_sectors);
size_t null_zone_valid_read_len(struct nullb *nullb,
sector_t sector, unsigned int len);
#else
-static inline int null_zone_init(struct nullb_device *dev)
+static inline int null_init_zoned_dev(struct nullb_device *dev,
+ struct request_queue *q)
{
pr_err("CONFIG_BLK_DEV_ZONED not enabled\n");
return -EINVAL;
}
-static inline void null_zone_exit(struct nullb_device *dev) {}
-static inline blk_status_t null_handle_zoned(struct nullb_cmd *cmd,
- enum req_opf op, sector_t sector,
- sector_t nr_sectors)
+static inline int null_register_zoned_dev(struct nullb *nullb)
+{
+ return -ENODEV;
+}
+static inline void null_free_zoned_dev(struct nullb_device *dev) {}
+static inline blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector, sector_t nr_sectors)
{
return BLK_STS_NOTSUPP;
}
if (!dev)
return;
- null_zone_exit(dev);
+ null_free_zoned_dev(dev);
badblocks_exit(&dev->badblocks);
kfree(dev);
}
}
}
+blk_status_t null_process_cmd(struct nullb_cmd *cmd,
+ enum req_opf op, sector_t sector,
+ unsigned int nr_sectors)
+{
+ struct nullb_device *dev = cmd->nq->dev;
+ blk_status_t ret;
+
+ if (dev->badblocks.shift != -1) {
+ ret = null_handle_badblocks(cmd, sector, nr_sectors);
+ if (ret != BLK_STS_OK)
+ return ret;
+ }
+
+ if (dev->memory_backed)
+ return null_handle_memory_backed(cmd, op);
+
+ return BLK_STS_OK;
+}
+
static blk_status_t null_handle_cmd(struct nullb_cmd *cmd, sector_t sector,
sector_t nr_sectors, enum req_opf op)
{
goto out;
}
- if (nullb->dev->badblocks.shift != -1) {
- cmd->error = null_handle_badblocks(cmd, sector, nr_sectors);
- if (cmd->error != BLK_STS_OK)
- goto out;
- }
-
- if (dev->memory_backed)
- cmd->error = null_handle_memory_backed(cmd, op);
-
- if (!cmd->error && dev->zoned)
- cmd->error = null_handle_zoned(cmd, op, sector, nr_sectors);
+ if (dev->zoned)
+ cmd->error = null_process_zoned_cmd(cmd, op,
+ sector, nr_sectors);
+ else
+ cmd->error = null_process_cmd(cmd, op, sector, nr_sectors);
out:
nullb_complete_cmd(cmd);
disk->queue = nullb->q;
strncpy(disk->disk_name, nullb->disk_name, DISK_NAME_LEN);
-#ifdef CONFIG_BLK_DEV_ZONED
if (nullb->dev->zoned) {
- if (queue_is_mq(nullb->q)) {
- int ret = blk_revalidate_disk_zones(disk);
- if (ret)
- return ret;
- } else {
- blk_queue_chunk_sectors(nullb->q,
- nullb->dev->zone_size_sects);
- nullb->q->nr_zones = blkdev_nr_zones(disk);
- }
+ int ret = null_register_zoned_dev(nullb);
+
+ if (ret)
+ return ret;
}
-#endif
add_disk(disk);
return 0;
}
if (dev->zoned) {
- rv = null_zone_init(dev);
+ rv = null_init_zoned_dev(dev, nullb->q);
if (rv)
goto out_cleanup_blk_queue;
-
- nullb->q->limits.zoned = BLK_ZONED_HM;
- blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, nullb->q);
- blk_queue_required_elevator_features(nullb->q,
- ELEVATOR_F_ZBD_SEQ_WRITE);
}
nullb->q->queuedata = nullb;
return 0;
out_cleanup_zone:
- if (dev->zoned)
- null_zone_exit(dev);
+ null_free_zoned_dev(dev);
out_cleanup_blk_queue:
blk_cleanup_queue(nullb->q);
out_cleanup_tags:
return sect >> ilog2(dev->zone_size_sects);
}
-int null_zone_init(struct nullb_device *dev)
+int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
{
sector_t dev_size = (sector_t)dev->size * 1024 * 1024;
sector_t sector = 0;
sector += dev->zone_size_sects;
}
+ q->limits.zoned = BLK_ZONED_HM;
+ blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+ blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
+
+ return 0;
+}
+
+int null_register_zoned_dev(struct nullb *nullb)
+{
+ struct request_queue *q = nullb->q;
+
+ if (queue_is_mq(q))
+ return blk_revalidate_disk_zones(nullb->disk);
+
+ blk_queue_chunk_sectors(q, nullb->dev->zone_size_sects);
+ q->nr_zones = blkdev_nr_zones(nullb->disk);
+
return 0;
}
-void null_zone_exit(struct nullb_device *dev)
+void null_free_zoned_dev(struct nullb_device *dev)
{
kvfree(dev->zones);
}
struct nullb_device *dev = cmd->nq->dev;
unsigned int zno = null_zone_no(dev, sector);
struct blk_zone *zone = &dev->zones[zno];
+ blk_status_t ret;
+
+ trace_nullb_zone_op(cmd, zno, zone->cond);
+
+ if (zone->type == BLK_ZONE_TYPE_CONVENTIONAL)
+ return null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors);
switch (zone->cond) {
case BLK_ZONE_COND_FULL:
/* Cannot write to a full zone */
- cmd->error = BLK_STS_IOERR;
return BLK_STS_IOERR;
case BLK_ZONE_COND_EMPTY:
case BLK_ZONE_COND_IMP_OPEN:
if (zone->cond != BLK_ZONE_COND_EXP_OPEN)
zone->cond = BLK_ZONE_COND_IMP_OPEN;
+ ret = null_process_cmd(cmd, REQ_OP_WRITE, sector, nr_sectors);
+ if (ret != BLK_STS_OK)
+ return ret;
+
zone->wp += nr_sectors;
if (zone->wp == zone->start + zone->len)
zone->cond = BLK_ZONE_COND_FULL;
- break;
- case BLK_ZONE_COND_NOT_WP:
- break;
+ return BLK_STS_OK;
default:
/* Invalid zone condition */
return BLK_STS_IOERR;
}
-
- trace_nullb_zone_op(cmd, zno, zone->cond);
- return BLK_STS_OK;
}
static blk_status_t null_zone_mgmt(struct nullb_cmd *cmd, enum req_opf op,
return BLK_STS_OK;
}
-blk_status_t null_handle_zoned(struct nullb_cmd *cmd, enum req_opf op,
- sector_t sector, sector_t nr_sectors)
+blk_status_t null_process_zoned_cmd(struct nullb_cmd *cmd, enum req_opf op,
+ sector_t sector, sector_t nr_sectors)
{
switch (op) {
case REQ_OP_WRITE:
case REQ_OP_ZONE_FINISH:
return null_zone_mgmt(cmd, op, sector);
default:
- return BLK_STS_OK;
+ return null_process_cmd(cmd, op, sector, nr_sectors);
}
}
#include <linux/blk-mq.h>
#include <linux/blk-mq-virtio.h>
#include <linux/numa.h>
+#include <uapi/linux/virtio_ring.h>
#define PART_BITS 4
#define VQ_NAME_LEN 16
#include <linux/virtio.h>
#include <linux/virtio_rng.h>
#include <linux/module.h>
+#include <linux/slab.h>
static DEFINE_IDA(rng_index_ida);
for (i = 0; i < chip->nr_allocated_banks; i++) {
if (digests[i].alg_id != chip->allocated_banks[i].alg_id) {
- rc = EINVAL;
+ rc = -EINVAL;
goto out;
}
}
rc = -ENODEV;
return rc;
}
+EXPORT_SYMBOL_GPL(tpm2_get_cc_attrs_tbl);
/**
* tpm2_startup - turn on the TPM
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2012 IBM Corporation
+ * Copyright (C) 2012-2020 IBM Corporation
*
* Author: Ashley Lai <ashleydlai@gmail.com>
*
return len;
}
+/**
+ * ibmvtpm_crq_send_init - Send a CRQ initialize message
+ * @ibmvtpm: vtpm device struct
+ *
+ * Return:
+ * 0 on success.
+ * Non-zero on failure.
+ */
+static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
+{
+ int rc;
+
+ rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
+ if (rc != H_SUCCESS)
+ dev_err(ibmvtpm->dev,
+ "%s failed rc=%d\n", __func__, rc);
+
+ return rc;
+}
+
+/**
+ * tpm_ibmvtpm_resume - Resume from suspend
+ *
+ * @dev: device struct
+ *
+ * Return: Always 0.
+ */
+static int tpm_ibmvtpm_resume(struct device *dev)
+{
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ int rc = 0;
+
+ do {
+ if (rc)
+ msleep(100);
+ rc = plpar_hcall_norets(H_ENABLE_CRQ,
+ ibmvtpm->vdev->unit_address);
+ } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
+
+ if (rc) {
+ dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = vio_enable_interrupts(ibmvtpm->vdev);
+ if (rc) {
+ dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = ibmvtpm_crq_send_init(ibmvtpm);
+ if (rc)
+ dev_err(dev, "Error send_init rc=%d\n", rc);
+
+ return rc;
+}
+
/**
* tpm_ibmvtpm_send() - Send a TPM command
* @chip: tpm chip struct
static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ bool retry = true;
int rc, sig;
if (!ibmvtpm->rtce_buf) {
*/
ibmvtpm->tpm_processing_cmd = true;
+again:
rc = ibmvtpm_send_crq(ibmvtpm->vdev,
IBMVTPM_VALID_CMD, VTPM_TPM_COMMAND,
count, ibmvtpm->rtce_dma_handle);
if (rc != H_SUCCESS) {
+ /*
+ * H_CLOSED can be returned after LPM resume. Call
+ * tpm_ibmvtpm_resume() to re-enable the CRQ then retry
+ * ibmvtpm_send_crq() once before failing.
+ */
+ if (rc == H_CLOSED && retry) {
+ tpm_ibmvtpm_resume(ibmvtpm->dev);
+ retry = false;
+ goto again;
+ }
dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
- rc = 0;
ibmvtpm->tpm_processing_cmd = false;
- } else
- rc = 0;
+ }
spin_unlock(&ibmvtpm->rtce_lock);
- return rc;
+ return 0;
}
static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
return rc;
}
-/**
- * ibmvtpm_crq_send_init - Send a CRQ initialize message
- * @ibmvtpm: vtpm device struct
- *
- * Return:
- * 0 on success.
- * Non-zero on failure.
- */
-static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
-{
- int rc;
-
- rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
- if (rc != H_SUCCESS)
- dev_err(ibmvtpm->dev,
- "ibmvtpm_crq_send_init failed rc=%d\n", rc);
-
- return rc;
-}
-
/**
* tpm_ibmvtpm_remove - ibm vtpm remove entry point
* @vdev: vio device struct
ibmvtpm->crq_dma_handle, CRQ_RES_BUF_SIZE);
}
-/**
- * tpm_ibmvtpm_resume - Resume from suspend
- *
- * @dev: device struct
- *
- * Return: Always 0.
- */
-static int tpm_ibmvtpm_resume(struct device *dev)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
- struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
- int rc = 0;
-
- do {
- if (rc)
- msleep(100);
- rc = plpar_hcall_norets(H_ENABLE_CRQ,
- ibmvtpm->vdev->unit_address);
- } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
-
- if (rc) {
- dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
- return rc;
- }
-
- rc = vio_enable_interrupts(ibmvtpm->vdev);
- if (rc) {
- dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
- return rc;
- }
-
- rc = ibmvtpm_crq_send_init(ibmvtpm);
- if (rc)
- dev_err(dev, "Error send_init rc=%d\n", rc);
-
- return rc;
-}
-
static bool tpm_ibmvtpm_req_canceled(struct tpm_chip *chip, u8 status)
{
return (status == 0);
u32 intmask;
int rc;
+ if (priv->irq == 0)
+ return;
+
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
intmask = 0;
if (irq) {
tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
irq);
- if (!(chip->flags & TPM_CHIP_FLAG_IRQ))
+ if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
dev_err(&chip->dev, FW_BUG
"TPM interrupt not working, polling instead\n");
+
+ disable_interrupts(chip);
+ }
} else {
tpm_tis_probe_irq(chip, intmask);
}
* @base: base port address of the IIO device
*/
struct quad8_iio {
+ struct mutex lock;
struct counter_device counter;
unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
unsigned int preset[QUAD8_NUM_COUNTERS];
/* Borrow XOR Carry effectively doubles count range */
*val = (borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
for (i = 0; i < 3; i++)
*val |= (unsigned int)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return IIO_VAL_INT;
case IIO_CHAN_INFO_ENABLE:
*val = priv->ab_enable[chan->channel];
if ((unsigned int)val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_ENABLE:
/* only boolean values accepted */
if (val < 0 || val > 1)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[chan->channel] = val;
ior_cfg = val | priv->preset_enable[chan->channel] << 1;
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&priv->lock);
+
/* Quadrature scaling only available in quadrature mode */
- if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+ if (!priv->quadrature_mode[chan->channel] &&
+ (val2 || val != 1)) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
/* Only three gain states (1, 0.5, 0.25) */
if (val == 1 && !val2)
priv->quadrature_scale[chan->channel] = 2;
break;
default:
+ mutex_unlock(&priv->lock);
return -EINVAL;
}
- else
+ else {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
+ mutex_unlock(&priv->lock);
return 0;
}
if (preset > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->preset[chan->channel] = preset;
/* Reset Byte Pointer */
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
unsigned int mode_cfg = cnt_mode << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ mutex_lock(&priv->lock);
+
priv->count_mode[chan->channel] = cnt_mode;
/* Add quadrature mode configuration */
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
const struct iio_chan_spec *chan, unsigned int synchronous_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[chan->channel] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+ if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[chan->channel] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
const struct iio_chan_spec *chan, unsigned int quadrature_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int mode_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[chan->channel] << 1;
if (quadrature_mode)
mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
const struct iio_chan_spec *chan, unsigned int index_polarity)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[chan->channel];
priv->index_polarity[chan->channel] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_count_read(struct counter_device *counter,
struct counter_count *count, unsigned long *val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
/* Borrow XOR Carry effectively doubles count range */
*val = (unsigned long)(borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
for (i = 0; i < 3; i++)
*val |= (unsigned long)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_count_write(struct counter_device *counter,
struct counter_count *count, unsigned long val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int i;
if (val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_function_get(struct counter_device *counter,
struct counter_count *count, size_t *function)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int id = count->id;
- const unsigned int quadrature_mode = priv->quadrature_mode[id];
- const unsigned int scale = priv->quadrature_scale[id];
- if (quadrature_mode)
- switch (scale) {
+ mutex_lock(&priv->lock);
+
+ if (priv->quadrature_mode[id])
+ switch (priv->quadrature_scale[id]) {
case 0:
*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
break;
else
*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
+ mutex_unlock(&priv->lock);
+
return 0;
}
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
- unsigned int mode_cfg = priv->count_mode[id] << 1;
unsigned int *const synchronous_mode = priv->synchronous_mode + id;
- const unsigned int idr_cfg = priv->index_polarity[id] << 1;
const int base_offset = priv->base + 2 * id + 1;
+ unsigned int mode_cfg;
+ unsigned int idr_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[id] << 1;
+ idr_cfg = priv->index_polarity[id] << 1;
if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
*quadrature_mode = 0;
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[channel_id];
priv->index_polarity[channel_id] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[channel_id] << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[channel_id] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[channel_id])
+ if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[channel_id] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
break;
}
+ mutex_lock(&priv->lock);
+
priv->count_mode[count->id] = cnt_mode;
/* Set count mode configuration value */
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
if (err)
return err;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[count->id] = ab_enable;
ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return len;
}
return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+ unsigned int preset)
+{
+ const unsigned int base_offset = quad8iio->base + 2 * id;
+ int i;
+
+ quad8iio->preset[id] = preset;
+
+ /* Reset Byte Pointer */
+ outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+ /* Set Preset Register */
+ for (i = 0; i < 3; i++)
+ outb(preset >> (8 * i), base_offset);
+}
+
static ssize_t quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
- const int base_offset = priv->base + 2 * count->id;
unsigned int preset;
int ret;
- int i;
ret = kstrtouint(buf, 0, &preset);
if (ret)
if (preset > 0xFFFFFF)
return -EINVAL;
- priv->preset[count->id] = preset;
+ mutex_lock(&priv->lock);
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+ quad8_preset_register_set(priv, count->id, preset);
- /* Set Preset Register */
- for (i = 0; i < 3; i++)
- outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
return len;
}
static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_read(counter, count, private, buf);
+ mutex_unlock(&priv->lock);
+ return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+ mutex_unlock(&priv->lock);
+
/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
return sprintf(buf, "33554431\n");
}
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
+ unsigned int ceiling;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &ceiling);
+ if (ret)
+ return ret;
+
+ /* Only 24-bit values are supported */
+ if (ceiling > 0xFFFFFF)
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_write(counter, count, private, buf,
- len);
+ quad8_preset_register_set(priv, count->id, ceiling);
+ break;
}
+ mutex_unlock(&priv->lock);
+
return len;
}
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[count->id] = preset_enable;
ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
quad8iio->counter.priv = quad8iio;
quad8iio->base = base[id];
+ /* Initialize mutex */
+ mutex_init(&quad8iio->lock);
+
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */
struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
struct aead_edesc *edesc;
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = rctx->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
aead_request_complete(req, ecode);
else
crypto_finalize_aead_request(jrp->engine, req, ecode);
struct caam_drv_private_jr *jrp = dev_get_drvdata(jrdev);
int ivsize = crypto_skcipher_ivsize(skcipher);
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = rctx->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
skcipher_request_complete(req, ecode);
else
crypto_finalize_skcipher_request(jrp->engine, req, ecode);
if (ivsize || mapped_dst_nents > 1)
sg_to_sec4_set_last(edesc->sec4_sg + dst_sg_idx +
- mapped_dst_nents);
+ mapped_dst_nents - 1 + !!ivsize);
if (sec4_sg_bytes) {
edesc->sec4_sg_dma = dma_map_single(jrdev, edesc->sec4_sg,
struct caam_hash_state *state = ahash_request_ctx(req);
struct caam_hash_ctx *ctx = crypto_ahash_ctx(ahash);
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = state->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
req->base.complete(&req->base, ecode);
else
crypto_finalize_hash_request(jrp->engine, req, ecode);
struct caam_hash_state *state = ahash_request_ctx(req);
int digestsize = crypto_ahash_digestsize(ahash);
int ecode = 0;
+ bool has_bklog;
dev_dbg(jrdev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
edesc = state->edesc;
+ has_bklog = edesc->bklog;
if (err)
ecode = caam_jr_strstatus(jrdev, err);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
req->base.complete(&req->base, ecode);
else
crypto_finalize_hash_request(jrp->engine, req, ecode);
struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
struct rsa_edesc *edesc;
int ecode = 0;
+ bool has_bklog;
if (err)
ecode = caam_jr_strstatus(dev, err);
edesc = req_ctx->edesc;
+ has_bklog = edesc->bklog;
rsa_pub_unmap(dev, edesc, req);
rsa_io_unmap(dev, edesc, req);
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
akcipher_request_complete(req, ecode);
else
crypto_finalize_akcipher_request(jrp->engine, req, ecode);
struct caam_rsa_req_ctx *req_ctx = akcipher_request_ctx(req);
struct rsa_edesc *edesc;
int ecode = 0;
+ bool has_bklog;
if (err)
ecode = caam_jr_strstatus(dev, err);
edesc = req_ctx->edesc;
+ has_bklog = edesc->bklog;
switch (key->priv_form) {
case FORM1:
* If no backlog flag, the completion of the request is done
* by CAAM, not crypto engine.
*/
- if (!edesc->bklog)
+ if (!has_bklog)
akcipher_request_complete(req, ecode);
else
crypto_finalize_akcipher_request(jrp->engine, req, ecode);
static int chcr_ktls_update_connection_state(struct chcr_ktls_info *tx_info,
int new_state)
{
- unsigned long flags;
-
/* This function can be called from both rx (interrupt context) and tx
* queue contexts.
*/
- spin_lock_irqsave(&tx_info->lock, flags);
+ spin_lock_bh(&tx_info->lock);
switch (tx_info->connection_state) {
case KTLS_CONN_CLOSED:
tx_info->connection_state = new_state;
pr_err("unknown KTLS connection state\n");
break;
}
- spin_unlock_irqrestore(&tx_info->lock, flags);
+ spin_unlock_bh(&tx_info->lock);
return tx_info->connection_state;
}
config IMX_SCU
bool "IMX SCU Protocol driver"
- depends on IMX_MBOX || COMPILE_TEST
+ depends on IMX_MBOX
help
The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
config IMX_SCU_PD
bool "IMX SCU Power Domain driver"
- depends on IMX_SCU || COMPILE_TEST
+ depends on IMX_SCU
help
The System Controller Firmware (SCFW) based power domain driver.
PM_API(PM_QUERY_DATA),
};
-struct dentry *firmware_debugfs_root;
+static struct dentry *firmware_debugfs_root;
/**
* zynqmp_pm_argument_value() - Extract argument value from a PM-API request
return ret;
ret = pci_enable_sriov(pcidev, num_vfs);
- if (ret)
+ if (ret) {
dfl_fpga_cdev_config_ports_pf(cdev);
+ return ret;
+ }
}
- return ret;
+ return num_vfs;
}
static void cci_pci_remove(struct pci_dev *pcidev)
priv->clk = devm_clk_get(dev, "ref_clk");
if (IS_ERR(priv->clk)) {
- dev_err(dev, "input clock not found\n");
+ if (PTR_ERR(priv->clk) != -EPROBE_DEFER)
+ dev_err(dev, "input clock not found\n");
return PTR_ERR(priv->clk);
}
i2c_del_adapter(&aconnector->i2c->base);
kfree(aconnector->i2c);
}
+ kfree(aconnector->dm_dp_aux.aux.name);
kfree(connector);
}
static int
amdgpu_dm_connector_late_register(struct drm_connector *connector)
{
-#if defined(CONFIG_DEBUG_FS)
struct amdgpu_dm_connector *amdgpu_dm_connector =
to_amdgpu_dm_connector(connector);
+ int r;
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+ amdgpu_dm_connector->dm_dp_aux.aux.dev = connector->kdev;
+ r = drm_dp_aux_register(&amdgpu_dm_connector->dm_dp_aux.aux);
+ if (r)
+ return r;
+ }
+
+#if defined(CONFIG_DEBUG_FS)
connector_debugfs_init(amdgpu_dm_connector);
#endif
if (connector_type == DRM_MODE_CONNECTOR_DisplayPort
|| connector_type == DRM_MODE_CONNECTOR_eDP)
- amdgpu_dm_initialize_dp_connector(dm, aconnector);
+ amdgpu_dm_initialize_dp_connector(dm, aconnector, link->link_index);
out_free:
if (res) {
to_amdgpu_dm_connector(connector);
int r;
- amdgpu_dm_connector->dm_dp_aux.aux.dev = connector->kdev;
- r = drm_dp_aux_register(&amdgpu_dm_connector->dm_dp_aux.aux);
- if (r)
+ r = drm_dp_mst_connector_late_register(connector,
+ amdgpu_dm_connector->port);
+ if (r < 0)
return r;
#if defined(CONFIG_DEBUG_FS)
connector_debugfs_init(amdgpu_dm_connector);
#endif
- return r;
+ return 0;
}
static void
};
void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
- struct amdgpu_dm_connector *aconnector)
+ struct amdgpu_dm_connector *aconnector,
+ int link_index)
{
- aconnector->dm_dp_aux.aux.name = "dmdc";
+ aconnector->dm_dp_aux.aux.name =
+ kasprintf(GFP_KERNEL, "AMDGPU DM aux hw bus %d",
+ link_index);
aconnector->dm_dp_aux.aux.transfer = dm_dp_aux_transfer;
aconnector->dm_dp_aux.ddc_service = aconnector->dc_link->ddc;
int dm_mst_get_pbn_divider(struct dc_link *link);
void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
- struct amdgpu_dm_connector *aconnector);
+ struct amdgpu_dm_connector *aconnector,
+ int link_index);
#if defined(CONFIG_DRM_AMD_DC_DCN)
bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
struct pp_hwmgr *hwmgr,
const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table)
{
+ hwmgr->thermal_controller.ucType =
+ powerplay_table->sThermalController.ucType;
+ hwmgr->thermal_controller.ucI2cLine =
+ powerplay_table->sThermalController.ucI2cLine;
+ hwmgr->thermal_controller.ucI2cAddress =
+ powerplay_table->sThermalController.ucI2cAddress;
+
+ hwmgr->thermal_controller.fanInfo.bNoFan =
+ (0 != (powerplay_table->sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_NOFAN));
+
+ hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution =
+ powerplay_table->sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK;
+
+ hwmgr->thermal_controller.fanInfo.ulMinRPM
+ = powerplay_table->sThermalController.ucFanMinRPM * 100UL;
+ hwmgr->thermal_controller.fanInfo.ulMaxRPM
+ = powerplay_table->sThermalController.ucFanMaxRPM * 100UL;
+
+ set_hw_cap(hwmgr,
+ ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType,
+ PHM_PlatformCaps_ThermalController);
+
+ hwmgr->thermal_controller.use_hw_fan_control = 1;
+
return 0;
}
static bool renoir_is_dpm_running(struct smu_context *smu)
{
+ struct amdgpu_device *adev = smu->adev;
+
/*
* Util now, the pmfw hasn't exported the interface of SMU
* feature mask to APU SKU so just force on all the feature
* at early initial stage.
*/
- return true;
+ if (adev->in_suspend)
+ return false;
+ else
+ return true;
}
num_modes += drm_add_edid_modes(connector, anx6345->edid);
+ /* Driver currently supports only 6bpc */
+ connector->display_info.bpc = 6;
+
unlock:
if (power_off)
anx6345_poweroff(anx6345);
if (pos->vcpi) {
drm_dp_mst_put_port_malloc(port);
pos->vcpi = 0;
+ pos->pbn = 0;
}
return 0;
intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
crtc_state->lane_count, is_mst);
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
intel_edp_panel_on(intel_dp);
intel_ddi_clk_select(encoder, crtc_state);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
u32 temp, flags = 0;
/* XXX: DSI transcoder paranoia */
if (drm_WARN_ON(&dev_priv->drm, transcoder_is_dsi(cpu_transcoder)))
return;
+ if (INTEL_GEN(dev_priv) >= 12) {
+ intel_dp->regs.dp_tp_ctl = TGL_DP_TP_CTL(cpu_transcoder);
+ intel_dp->regs.dp_tp_status = TGL_DP_TP_STATUS(cpu_transcoder);
+ }
+
intel_dsc_get_config(encoder, pipe_config);
temp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder));
static struct intel_connector *
intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
{
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
struct intel_connector *connector;
enum port port = intel_dig_port->base.port;
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
intel_dig_port->dp.prepare_link_retrain =
intel_ddi_prepare_link_retrain;
+ if (INTEL_GEN(dev_priv) < 12) {
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
+ }
if (!intel_dp_init_connector(intel_dig_port, connector)) {
kfree(connector);
{
.name = "AUX D TBT1",
.domains = TGL_AUX_D_TBT1_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX E TBT2",
.domains = TGL_AUX_E_TBT2_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX F TBT3",
.domains = TGL_AUX_F_TBT3_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX G TBT4",
.domains = TGL_AUX_G_TBT4_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX H TBT5",
.domains = TGL_AUX_H_TBT5_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
{
.name = "AUX I TBT6",
.domains = TGL_AUX_I_TBT6_IO_POWER_DOMAINS,
- .ops = &hsw_power_well_ops,
+ .ops = &icl_tc_phy_aux_power_well_ops,
.id = DISP_PW_ID_NONE,
{
.hsw.regs = &icl_aux_power_well_regs,
intel_crtc_has_type(pipe_config,
INTEL_OUTPUT_DP_MST));
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
/*
* There are four kinds of DP registers:
*
intel_dig_port->dp.output_reg = output_reg;
intel_dig_port->max_lanes = 4;
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
intel_encoder->type = INTEL_OUTPUT_DP;
intel_encoder->power_domain = intel_port_to_power_domain(port);
*/
if (dev_priv->vbt.backlight.type !=
INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE &&
+ i915_modparams.enable_dpcd_backlight != 1 &&
!drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
DP_QUIRK_FORCE_DPCD_BACKLIGHT)) {
DRM_DEV_INFO(dev->dev,
intel_de_write(i915, HDCP_RPRIME(i915, cpu_transcoder, port), ri.reg);
/* Wait for Ri prime match */
- if (wait_for(intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)) &
+ if (wait_for((intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)) &
+ (HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC)) ==
(HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) {
DRM_ERROR("Ri' mismatch detected, link check failed (%x)\n",
intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)));
}
}
-static bool gen12_plane_supports_mc_ccs(enum plane_id plane_id)
+static bool gen12_plane_supports_mc_ccs(struct drm_i915_private *dev_priv,
+ enum plane_id plane_id)
{
+ /* Wa_14010477008:tgl[a0..c0] */
+ if (IS_TGL_REVID(dev_priv, TGL_REVID_A0, TGL_REVID_C0))
+ return false;
+
return plane_id < PLANE_SPRITE4;
}
static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,
u32 format, u64 modifier)
{
+ struct drm_i915_private *dev_priv = to_i915(_plane->dev);
struct intel_plane *plane = to_intel_plane(_plane);
switch (modifier) {
case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
- if (!gen12_plane_supports_mc_ccs(plane->id))
+ if (!gen12_plane_supports_mc_ccs(dev_priv, plane->id))
return false;
/* fall through */
case DRM_FORMAT_MOD_LINEAR:
}
}
-static const u64 *gen12_get_plane_modifiers(enum plane_id plane_id)
+static const u64 *gen12_get_plane_modifiers(struct drm_i915_private *dev_priv,
+ enum plane_id plane_id)
{
- if (gen12_plane_supports_mc_ccs(plane_id))
+ if (gen12_plane_supports_mc_ccs(dev_priv, plane_id))
return gen12_plane_format_modifiers_mc_ccs;
else
return gen12_plane_format_modifiers_rc_ccs;
plane->has_ccs = skl_plane_has_ccs(dev_priv, pipe, plane_id);
if (INTEL_GEN(dev_priv) >= 12) {
- modifiers = gen12_get_plane_modifiers(plane_id);
+ modifiers = gen12_get_plane_modifiers(dev_priv, plane_id);
plane_funcs = &gen12_plane_funcs;
} else {
if (plane->has_ccs)
events = (GEN6_PM_RP_UP_THRESHOLD |
GEN6_PM_RP_DOWN_THRESHOLD |
GEN6_PM_RP_DOWN_TIMEOUT);
-
WRITE_ONCE(rps->pm_events, events);
+
spin_lock_irq(>->irq_lock);
gen6_gt_pm_enable_irq(gt, rps->pm_events);
spin_unlock_irq(>->irq_lock);
- set(gt->uncore, GEN6_PMINTRMSK, rps_pm_mask(rps, rps->cur_freq));
+ intel_uncore_write(gt->uncore,
+ GEN6_PMINTRMSK, rps_pm_mask(rps, rps->last_freq));
}
static void gen6_rps_reset_interrupts(struct intel_rps *rps)
struct intel_gt *gt = rps_to_gt(rps);
WRITE_ONCE(rps->pm_events, 0);
- set(gt->uncore, GEN6_PMINTRMSK, rps_pm_sanitize_mask(rps, ~0u));
+
+ intel_uncore_write(gt->uncore,
+ GEN6_PMINTRMSK, rps_pm_sanitize_mask(rps, ~0u));
spin_lock_irq(>->irq_lock);
gen6_gt_pm_disable_irq(gt, GEN6_PM_RPS_EVENTS);
(IS_ICELAKE(p) && IS_REVID(p, since, until))
#define TGL_REVID_A0 0x0
+#define TGL_REVID_B0 0x1
+#define TGL_REVID_C0 0x2
#define IS_TGL_REVID(p, since, until) \
(IS_TIGERLAKE(p) && IS_REVID(p, since, until))
* Follow the style described here for new macros, and while changing existing
* macros. Do **not** mass change existing definitions just to update the style.
*
- * Layout
- * ~~~~~~
+ * File Layout
+ * ~~~~~~~~~~~
*
* Keep helper macros near the top. For example, _PIPE() and friends.
*
return PTR_ERR(dw_plat_data->regm);
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "Failed to get hdmi top irq\n");
+ if (irq < 0)
return irq;
- }
ret = devm_request_threaded_irq(dev, irq, dw_hdmi_top_irq,
dw_hdmi_top_thread_irq, IRQF_SHARED,
*/
if ((sched->timeout != MAX_SCHEDULE_TIMEOUT &&
!cancel_delayed_work(&sched->work_tdr)) ||
- __kthread_should_park(sched->thread))
+ kthread_should_park())
return NULL;
spin_lock(&sched->job_list_lock);
return &state->base;
}
+static void tidss_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct tidss_crtc *tcrtc = to_tidss_crtc(crtc);
+
+ drm_crtc_cleanup(crtc);
+ kfree(tcrtc);
+}
+
static const struct drm_crtc_funcs tidss_crtc_funcs = {
.reset = tidss_crtc_reset,
- .destroy = drm_crtc_cleanup,
+ .destroy = tidss_crtc_destroy,
.set_config = drm_atomic_helper_set_config,
.page_flip = drm_atomic_helper_page_flip,
.atomic_duplicate_state = tidss_crtc_duplicate_state,
bool has_ctm = tidss->feat->vp_feat.color.has_ctm;
int ret;
- tcrtc = devm_kzalloc(tidss->dev, sizeof(*tcrtc), GFP_KERNEL);
+ tcrtc = kzalloc(sizeof(*tcrtc), GFP_KERNEL);
if (!tcrtc)
return ERR_PTR(-ENOMEM);
ret = drm_crtc_init_with_planes(&tidss->ddev, crtc, primary,
NULL, &tidss_crtc_funcs, NULL);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(tcrtc);
return ERR_PTR(ret);
+ }
drm_crtc_helper_add(crtc, &tidss_crtc_helper_funcs);
return 0;
}
+static void tidss_encoder_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+ kfree(encoder);
+}
+
static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
.atomic_check = tidss_encoder_atomic_check,
};
static const struct drm_encoder_funcs encoder_funcs = {
- .destroy = drm_encoder_cleanup,
+ .destroy = tidss_encoder_destroy,
};
struct drm_encoder *tidss_encoder_create(struct tidss_device *tidss,
struct drm_encoder *enc;
int ret;
- enc = devm_kzalloc(tidss->dev, sizeof(*enc), GFP_KERNEL);
+ enc = kzalloc(sizeof(*enc), GFP_KERNEL);
if (!enc)
return ERR_PTR(-ENOMEM);
ret = drm_encoder_init(&tidss->ddev, enc, &encoder_funcs,
encoder_type, NULL);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(enc);
return ERR_PTR(ret);
+ }
drm_encoder_helper_add(enc, &encoder_helper_funcs);
dispc_plane_enable(tidss->dispc, tplane->hw_plane_id, false);
}
+static void drm_plane_destroy(struct drm_plane *plane)
+{
+ struct tidss_plane *tplane = to_tidss_plane(plane);
+
+ drm_plane_cleanup(plane);
+ kfree(tplane);
+}
+
static const struct drm_plane_helper_funcs tidss_plane_helper_funcs = {
.atomic_check = tidss_plane_atomic_check,
.atomic_update = tidss_plane_atomic_update,
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.reset = drm_atomic_helper_plane_reset,
- .destroy = drm_plane_cleanup,
+ .destroy = drm_plane_destroy,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
BIT(DRM_MODE_BLEND_COVERAGE));
int ret;
- tplane = devm_kzalloc(tidss->dev, sizeof(*tplane), GFP_KERNEL);
+ tplane = kzalloc(sizeof(*tplane), GFP_KERNEL);
if (!tplane)
return ERR_PTR(-ENOMEM);
formats, num_formats,
NULL, type, NULL);
if (ret < 0)
- return ERR_PTR(ret);
+ goto err;
drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
default_encoding,
default_range);
if (ret)
- return ERR_PTR(ret);
+ goto err;
ret = drm_plane_create_alpha_property(&tplane->plane);
if (ret)
- return ERR_PTR(ret);
+ goto err;
ret = drm_plane_create_blend_mode_property(&tplane->plane, blend_modes);
if (ret)
- return ERR_PTR(ret);
+ goto err;
return tplane;
+
+err:
+ kfree(tplane);
+ return ERR_PTR(ret);
}
#include <linux/file.h>
#include <linux/sync_file.h>
+#include <linux/uaccess.h>
#include <drm/drm_file.h>
#include <drm/virtgpu_drm.h>
#include <linux/virtio.h>
#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
#include <drm/drm_file.h>
shared_sint.vector = HYPERVISOR_CALLBACK_VECTOR;
shared_sint.masked = false;
- if (ms_hyperv.hints & HV_DEPRECATING_AEOI_RECOMMENDED)
- shared_sint.auto_eoi = false;
- else
- shared_sint.auto_eoi = true;
-
+ shared_sint.auto_eoi = hv_recommend_using_aeoi();
hv_set_synint_state(VMBUS_MESSAGE_SINT, shared_sint.as_uint64);
/* Enable the global synic bit */
__field(int, ret)
),
TP_fast_assign(
- memcpy(__entry->guest_id, &msg->guest_endpoint_id.b, 16);
- memcpy(__entry->host_id, &msg->host_service_id.b, 16);
+ export_guid(__entry->guest_id, &msg->guest_endpoint_id);
+ export_guid(__entry->host_id, &msg->host_service_id);
__entry->ret = ret;
),
TP_printk("sending guest_endpoint_id %pUl, host_service_id %pUl, "
return drv->resume(dev);
}
+#else
+#define vmbus_suspend NULL
+#define vmbus_resume NULL
#endif /* CONFIG_PM_SLEEP */
/*
}
/*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS: see the comment before vmbus_bus_pm.
+ * Note: we must use the "noirq" ops: see the comment before vmbus_bus_pm.
+ *
+ * suspend_noirq/resume_noirq are set to NULL to support Suspend-to-Idle: we
+ * shouldn't suspend the vmbus devices upon Suspend-to-Idle, otherwise there
+ * is no way to wake up a Generation-2 VM.
+ *
+ * The other 4 ops are for hibernation.
*/
+
static const struct dev_pm_ops vmbus_pm = {
- SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_suspend, vmbus_resume)
+ .suspend_noirq = NULL,
+ .resume_noirq = NULL,
+ .freeze_noirq = vmbus_suspend,
+ .thaw_noirq = vmbus_resume,
+ .poweroff_noirq = vmbus_suspend,
+ .restore_noirq = vmbus_resume,
};
/* The one and only one */
return 0;
}
+#else
+#define vmbus_bus_suspend NULL
+#define vmbus_bus_resume NULL
#endif /* CONFIG_PM_SLEEP */
static const struct acpi_device_id vmbus_acpi_device_ids[] = {
MODULE_DEVICE_TABLE(acpi, vmbus_acpi_device_ids);
/*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS, otherwise NIC SR-IOV can not work, because the
- * "pci_dev_pm_ops" uses the "noirq" callbacks: in the resume path, the
- * pci "noirq" restore callback runs before "non-noirq" callbacks (see
+ * Note: we must use the "no_irq" ops, otherwise hibernation can not work with
+ * PCI device assignment, because "pci_dev_pm_ops" uses the "noirq" ops: in
+ * the resume path, the pci "noirq" restore op runs before "non-noirq" op (see
* resume_target_kernel() -> dpm_resume_start(), and hibernation_restore() ->
* dpm_resume_end()). This means vmbus_bus_resume() and the pci-hyperv's
- * resume callback must also run via the "noirq" callbacks.
+ * resume callback must also run via the "noirq" ops.
+ *
+ * Set suspend_noirq/resume_noirq to NULL for Suspend-to-Idle: see the comment
+ * earlier in this file before vmbus_pm.
*/
+
static const struct dev_pm_ops vmbus_bus_pm = {
- SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_bus_suspend, vmbus_bus_resume)
+ .suspend_noirq = NULL,
+ .resume_noirq = NULL,
+ .freeze_noirq = vmbus_bus_suspend,
+ .thaw_noirq = vmbus_bus_resume,
+ .poweroff_noirq = vmbus_bus_suspend,
+ .restore_noirq = vmbus_bus_resume
};
static struct acpi_driver vmbus_acpi_driver = {
#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */
/* ID Register Bit Designations (AD7192_REG_ID) */
-#define ID_AD7190 0x4
-#define ID_AD7192 0x0
-#define ID_AD7193 0x2
-#define ID_AD7195 0x6
+#define CHIPID_AD7190 0x4
+#define CHIPID_AD7192 0x0
+#define CHIPID_AD7193 0x2
+#define CHIPID_AD7195 0x6
#define AD7192_ID_MASK 0x0F
/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
AD7192_SYSCALIB_FULL_SCALE,
};
+enum {
+ ID_AD7190,
+ ID_AD7192,
+ ID_AD7193,
+ ID_AD7195,
+};
+
+struct ad7192_chip_info {
+ unsigned int chip_id;
+ const char *name;
+};
+
struct ad7192_state {
+ const struct ad7192_chip_info *chip_info;
struct regulator *avdd;
struct regulator *dvdd;
struct clk *mclk;
u32 conf;
u32 scale_avail[8][2];
u8 gpocon;
- u8 devid;
u8 clock_sel;
struct mutex lock; /* protect sensor state */
u8 syscalib_mode[8];
id &= AD7192_ID_MASK;
- if (id != st->devid)
+ if (id != st->chip_info->chip_id)
dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
id);
st->mode |= AD7192_MODE_REJ60;
refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
- if (refin2_en && st->devid != ID_AD7195)
+ if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
st->conf |= AD7192_CONF_REFSEL;
st->conf &= ~AD7192_CONF_CHOP;
IIO_CHAN_SOFT_TIMESTAMP(14),
};
+static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
+ [ID_AD7190] = {
+ .chip_id = CHIPID_AD7190,
+ .name = "ad7190",
+ },
+ [ID_AD7192] = {
+ .chip_id = CHIPID_AD7192,
+ .name = "ad7192",
+ },
+ [ID_AD7193] = {
+ .chip_id = CHIPID_AD7193,
+ .name = "ad7193",
+ },
+ [ID_AD7195] = {
+ .chip_id = CHIPID_AD7195,
+ .name = "ad7195",
+ },
+};
+
static int ad7192_channels_config(struct iio_dev *indio_dev)
{
struct ad7192_state *st = iio_priv(indio_dev);
- switch (st->devid) {
- case ID_AD7193:
+ switch (st->chip_info->chip_id) {
+ case CHIPID_AD7193:
indio_dev->channels = ad7193_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
break;
}
static const struct of_device_id ad7192_of_match[] = {
- { .compatible = "adi,ad7190", .data = (void *)ID_AD7190 },
- { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 },
- { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 },
- { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 },
+ { .compatible = "adi,ad7190", .data = &ad7192_chip_info_tbl[ID_AD7190] },
+ { .compatible = "adi,ad7192", .data = &ad7192_chip_info_tbl[ID_AD7192] },
+ { .compatible = "adi,ad7193", .data = &ad7192_chip_info_tbl[ID_AD7193] },
+ { .compatible = "adi,ad7195", .data = &ad7192_chip_info_tbl[ID_AD7195] },
{}
};
MODULE_DEVICE_TABLE(of, ad7192_of_match);
}
spi_set_drvdata(spi, indio_dev);
- st->devid = (unsigned long)of_device_get_match_data(&spi->dev);
+ st->chip_info = of_device_get_match_data(&spi->dev);
indio_dev->dev.parent = &spi->dev;
- indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->name = st->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = ad7192_channels_config(indio_dev);
if (ret < 0)
goto error_disable_dvdd;
- if (st->devid == ID_AD7195)
+ if (st->chip_info->chip_id == CHIPID_AD7195)
indio_dev->info = &ad7195_info;
else
indio_dev->info = &ad7192_info;
.read_raw = &ad7793_read_raw,
.write_raw = &ad7793_write_raw,
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
- .attrs = &ad7793_attribute_group,
+ .attrs = &ad7797_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
static void stm32_adc_dma_buffer_done(void *data)
{
struct iio_dev *indio_dev = data;
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ int residue = stm32_adc_dma_residue(adc);
+
+ /*
+ * In DMA mode the trigger services of IIO are not used
+ * (e.g. no call to iio_trigger_poll).
+ * Calling irq handler associated to the hardware trigger is not
+ * relevant as the conversions have already been done. Data
+ * transfers are performed directly in DMA callback instead.
+ * This implementation avoids to call trigger irq handler that
+ * may sleep, in an atomic context (DMA irq handler context).
+ */
+ dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi);
- iio_trigger_poll_chained(indio_dev->trig);
+ while (residue >= indio_dev->scan_bytes) {
+ u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi];
+
+ iio_push_to_buffers(indio_dev, buffer);
+
+ residue -= indio_dev->scan_bytes;
+ adc->bufi += indio_dev->scan_bytes;
+ if (adc->bufi >= adc->rx_buf_sz)
+ adc->bufi = 0;
+ }
}
static int stm32_adc_dma_start(struct iio_dev *indio_dev)
{
struct iio_dev *indio_dev;
struct device *dev = &pdev->dev;
+ irqreturn_t (*handler)(int irq, void *p) = NULL;
struct stm32_adc *adc;
int ret;
if (ret < 0)
return ret;
+ if (!adc->dma_chan)
+ handler = &stm32_adc_trigger_handler;
+
ret = iio_triggered_buffer_setup(indio_dev,
- &iio_pollfunc_store_time,
- &stm32_adc_trigger_handler,
+ &iio_pollfunc_store_time, handler,
&stm32_adc_buffer_setup_ops);
if (ret) {
dev_err(&pdev->dev, "buffer setup failed\n");
struct mutex lock;
u8 tx_buf ____cacheline_aligned;
- u16 rx_buf;
+ u8 rx_buf[3];
};
#define ADS8344_VOLTAGE_CHANNEL(chan, si) \
udelay(9);
- ret = spi_read(spi, &adc->rx_buf, 2);
+ ret = spi_read(spi, adc->rx_buf, sizeof(adc->rx_buf));
if (ret)
return ret;
- return adc->rx_buf;
+ return adc->rx_buf[0] << 9 | adc->rx_buf[1] << 1 | adc->rx_buf[2] >> 7;
}
static int ads8344_read_raw(struct iio_dev *iio,
#define XADC_FLAGS_BUFFERED BIT(0)
+/*
+ * The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
+ * not have a hardware FIFO. Which means an interrupt is generated for each
+ * conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
+ * overloaded by the interrupts that it soft-lockups. For this reason the driver
+ * limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
+ * but still responsive.
+ */
+#define XADC_MAX_SAMPLERATE 150000
+
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
uint32_t val)
{
spin_lock_irqsave(&xadc->lock, flags);
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
- xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS);
+ xadc_write_reg(xadc, XADC_AXI_REG_IPISR, XADC_AXI_INT_EOS);
if (state)
val |= XADC_AXI_INT_EOS;
else
{
uint16_t val;
+ /* Powerdown the ADC-B when it is not needed. */
switch (seq_mode) {
case XADC_CONF1_SEQ_SIMULTANEOUS:
case XADC_CONF1_SEQ_INDEPENDENT:
- val = XADC_CONF2_PD_ADC_B;
+ val = 0;
break;
default:
- val = 0;
+ val = XADC_CONF2_PD_ADC_B;
break;
}
if (ret)
goto err;
+ /*
+ * In simultaneous mode the upper and lower aux channels are samples at
+ * the same time. In this mode the upper 8 bits in the sequencer
+ * register are don't care and the lower 8 bits control two channels
+ * each. As such we must set the bit if either the channel in the lower
+ * group or the upper group is enabled.
+ */
+ if (seq_mode == XADC_CONF1_SEQ_SIMULTANEOUS)
+ scan_mask = ((scan_mask >> 8) | scan_mask) & 0xff0000;
+
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
if (ret)
goto err;
.postdisable = &xadc_postdisable,
};
+static int xadc_read_samplerate(struct xadc *xadc)
+{
+ unsigned int div;
+ uint16_t val16;
+ int ret;
+
+ ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
+ if (ret)
+ return ret;
+
+ div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
+ if (div < 2)
+ div = 2;
+
+ return xadc_get_dclk_rate(xadc) / div / 26;
+}
+
static int xadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
- unsigned int div;
uint16_t val16;
int ret;
*val = -((273150 << 12) / 503975);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
- ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
- if (ret)
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
return ret;
- div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
- if (div < 2)
- div = 2;
-
- *val = xadc_get_dclk_rate(xadc) / div / 26;
-
+ *val = ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
-static int xadc_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int val, int val2, long info)
+static int xadc_write_samplerate(struct xadc *xadc, int val)
{
- struct xadc *xadc = iio_priv(indio_dev);
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
unsigned int div;
if (!clk_rate)
return -EINVAL;
- if (info != IIO_CHAN_INFO_SAMP_FREQ)
- return -EINVAL;
-
if (val <= 0)
return -EINVAL;
/* Max. 150 kSPS */
- if (val > 150000)
- val = 150000;
+ if (val > XADC_MAX_SAMPLERATE)
+ val = XADC_MAX_SAMPLERATE;
val *= 26;
* limit.
*/
div = clk_rate / val;
- if (clk_rate / div / 26 > 150000)
+ if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
div++;
if (div < 2)
div = 2;
div << XADC_CONF2_DIV_OFFSET);
}
+static int xadc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ if (info != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ return xadc_write_samplerate(xadc, val);
+}
+
static const struct iio_event_spec xadc_temp_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
if (ret)
goto err_free_samplerate_trigger;
+ /*
+ * Make sure not to exceed the maximum samplerate since otherwise the
+ * resulting interrupt storm will soft-lock the system.
+ */
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ if (ret > XADC_MAX_SAMPLERATE) {
+ ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ }
+ }
+
ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
dev_name(&pdev->dev), indio_dev);
if (ret)
struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
- if (!sdata->sensor_settings->odr.addr)
+ if (!sdata->sensor_settings->odr.mask)
return 0;
err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
ret = fwnode_property_read_u32(child, "num", &num);
if (ret)
return ret;
- if (num > AD5770R_MAX_CHANNELS)
+ if (num >= AD5770R_MAX_CHANNELS)
return -EINVAL;
ret = fwnode_property_read_u32_array(child,
if (result)
goto out_unlock;
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
result = inv_mpu6050_switch_engine(st, true, st->suspended_sensors);
if (result)
goto out_unlock;
mutex_lock(&st->lock);
+ st->suspended_sensors = 0;
+ if (pm_runtime_suspended(dev)) {
+ result = 0;
+ goto out_unlock;
+ }
+
if (iio_buffer_enabled(indio_dev)) {
result = inv_mpu6050_prepare_fifo(st, false);
if (result)
goto out_unlock;
}
- st->suspended_sensors = 0;
if (st->chip_config.accl_en)
st->suspended_sensors |= INV_MPU6050_SENSOR_ACCL;
if (st->chip_config.gyro_en)
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
+ * @decimator: Sensor decimation factor.
* @sip: Number of samples in a given pattern.
* @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
u32 odr;
u16 watermark;
+ u8 decimator;
u8 sip;
s64 ts_ref;
struct {
const struct st_lsm6dsx_ext_dev_settings *settings;
+ u32 slv_odr;
u8 addr;
} ext_info;
};
break;
}
+ sensor->decimator = decimator;
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
- int err, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
+ int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
u8 gyro_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
acc_sip = acc_sensor->sip;
ts_sip = hw->ts_sip;
offset = 0;
+ sip = 0;
while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
- if (gyro_sip > 0) {
+ if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
memcpy(gyro_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (acc_sip > 0) {
+ if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
memcpy(acc_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (ext_sip > 0) {
+ if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
memcpy(ext_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (gyro_sip-- > 0)
+ if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_GYRO],
gyro_buff, gyro_sensor->ts_ref + ts);
- if (acc_sip-- > 0)
+ gyro_sip--;
+ }
+ if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_ACC],
acc_buff, acc_sensor->ts_ref + ts);
- if (ext_sip-- > 0)
+ acc_sip--;
+ }
+ if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_EXT0],
ext_buff, ext_sensor->ts_ref + ts);
+ ext_sip--;
+ }
+ sip++;
}
}
return 0;
}
-static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
+static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *reg;
int err;
+ /*
+ * flush hw FIFO before device reset in order to avoid
+ * possible races on interrupt line 1. If the first interrupt
+ * line is asserted during hw reset the device will work in
+ * I3C-only mode (if it is supported)
+ */
+ err = st_lsm6dsx_flush_fifo(hw);
+ if (err < 0 && err != -ENOTSUPP)
+ return err;
+
/* device sw reset */
reg = &hw->settings->reset;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
msleep(50);
+ return 0;
+}
+
+static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
+{
+ const struct st_lsm6dsx_reg *reg;
+ int err;
+
+ err = st_lsm6dsx_reset_device(hw);
+ if (err < 0)
+ return err;
+
/* enable Block Data Update */
reg = &hw->settings->bdu;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
settings = sensor->ext_info.settings;
if (enable) {
- err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr);
+ err = st_lsm6dsx_shub_set_odr(sensor,
+ sensor->ext_info.slv_odr);
if (err < 0)
return err;
} else {
if (err < 0)
return err;
- delay = 1000000000 / sensor->odr;
+ delay = 1000000000 / sensor->ext_info.slv_odr;
usleep_range(delay, 2 * delay);
len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
iio_device_release_direct_mode(iio_dev);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
- *val = sensor->odr / 1000;
- *val2 = (sensor->odr % 1000) * 1000;
+ *val = sensor->ext_info.slv_odr / 1000;
+ *val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
ret = IIO_VAL_INT_PLUS_MICRO;
break;
case IIO_CHAN_INFO_SCALE:
val = val * 1000 + val2 / 1000;
err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
- if (!err)
- sensor->odr = val;
+ if (!err) {
+ struct st_lsm6dsx_hw *hw = sensor->hw;
+ struct st_lsm6dsx_sensor *ref_sensor;
+ u8 odr_val;
+ int odr;
+
+ ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+ odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
+ if (odr < 0)
+ return odr;
+
+ sensor->ext_info.slv_odr = val;
+ sensor->odr = odr;
+ }
break;
}
default:
const struct st_lsm6dsx_ext_dev_settings *info,
u8 i2c_addr, const char *name)
{
+ enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
struct iio_chan_spec *ext_channels;
struct st_lsm6dsx_sensor *sensor;
struct iio_dev *iio_dev;
sensor = iio_priv(iio_dev);
sensor->id = id;
sensor->hw = hw;
- sensor->odr = info->odr_table.odr_avl[0].milli_hz;
+ sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+ sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
sensor->gain = info->fs_table.fs_avl[0].gain;
sensor->ext_info.settings = info;
sensor->ext_info.addr = i2c_addr;
return -EINVAL;
integer = ch;
} else {
- ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
+ ret = __iio_str_to_fixpoint(buf, fract_mult, &integer, &fract,
+ scale_db);
if (ret)
return ret;
}
- ret = __iio_str_to_fixpoint(buf, fract_mult, &integer, &fract,
- scale_db);
- if (ret)
- return ret;
ret = indio_dev->info->write_raw(indio_dev, this_attr->c,
integer, fract, this_attr->address);
ret = xa_alloc_cyclic_irq(&cm.local_id_table, &id, NULL, xa_limit_32b,
&cm.local_id_next, GFP_KERNEL);
- if (ret)
+ if (ret < 0)
goto error;
cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
static void cm_format_rej(struct cm_rej_msg *rej_msg,
struct cm_id_private *cm_id_priv,
- enum ib_cm_rej_reason reason,
- void *ari,
- u8 ari_length,
- const void *private_data,
- u8 private_data_len)
+ enum ib_cm_rej_reason reason, void *ari,
+ u8 ari_length, const void *private_data,
+ u8 private_data_len, enum ib_cm_state state)
{
lockdep_assert_held(&cm_id_priv->lock);
IBA_SET(CM_REJ_REMOTE_COMM_ID, rej_msg,
be32_to_cpu(cm_id_priv->id.remote_id));
- switch(cm_id_priv->id.state) {
+ switch (state) {
case IB_CM_REQ_RCVD:
IBA_SET(CM_REJ_LOCAL_COMM_ID, rej_msg, be32_to_cpu(0));
IBA_SET(CM_REJ_MESSAGE_REJECTED, rej_msg, CM_MSG_RESPONSE_REQ);
cm_id_priv->private_data_len);
break;
case IB_CM_TIMEWAIT:
- cm_format_rej((struct cm_rej_msg *) msg->mad, cm_id_priv,
- IB_CM_REJ_STALE_CONN, NULL, 0, NULL, 0);
+ cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv,
+ IB_CM_REJ_STALE_CONN, NULL, 0, NULL, 0,
+ IB_CM_TIMEWAIT);
break;
default:
goto unlock;
u8 ari_length, const void *private_data,
u8 private_data_len)
{
+ enum ib_cm_state state = cm_id_priv->id.state;
struct ib_mad_send_buf *msg;
int ret;
(ari && ari_length > IB_CM_REJ_ARI_LENGTH))
return -EINVAL;
- switch (cm_id_priv->id.state) {
+ switch (state) {
case IB_CM_REQ_SENT:
case IB_CM_MRA_REQ_RCVD:
case IB_CM_REQ_RCVD:
if (ret)
return ret;
cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv, reason,
- ari, ari_length, private_data, private_data_len);
+ ari, ari_length, private_data, private_data_len,
+ state);
break;
case IB_CM_REP_SENT:
case IB_CM_MRA_REP_RCVD:
if (ret)
return ret;
cm_format_rej((struct cm_rej_msg *)msg->mad, cm_id_priv, reason,
- ari, ari_length, private_data, private_data_len);
+ ari, ari_length, private_data, private_data_len,
+ state);
break;
default:
pr_debug("%s: local_id %d, cm_id->state: %d\n", __func__,
* uverbs_uobject_fd_release(), and the caller is expected to ensure
* that release is never done while a call to lookup is possible.
*/
- if (f->f_op != fd_type->fops) {
+ if (f->f_op != fd_type->fops || uobject->ufile != ufile) {
fput(f);
return ERR_PTR(-EBADF);
}
filp = anon_inode_getfile(fd_type->name, fd_type->fops, NULL,
fd_type->flags);
if (IS_ERR(filp)) {
+ uverbs_uobject_put(uobj);
uobj = ERR_CAST(filp);
- goto err_uobj;
+ goto err_fd;
}
uobj->object = filp;
uobj->id = new_fd;
return uobj;
-err_uobj:
- uverbs_uobject_put(uobj);
err_fd:
put_unused_fd(new_fd);
return uobj;
enum rdma_lookup_mode mode)
{
assert_uverbs_usecnt(uobj, mode);
- uobj->uapi_object->type_class->lookup_put(uobj, mode);
/*
* In order to unlock an object, either decrease its usecnt for
* read access or zero it in case of exclusive access. See
break;
}
+ uobj->uapi_object->type_class->lookup_put(uobj, mode);
/* Pairs with the kref obtained by type->lookup_get */
uverbs_uobject_put(uobj);
}
ret = mmget_not_zero(mm);
if (!ret) {
list_del_init(&priv->list);
+ if (priv->entry) {
+ rdma_user_mmap_entry_put(priv->entry);
+ priv->entry = NULL;
+ }
mm = NULL;
continue;
}
u64 header;
wqe = i40iw_sc_cqp_get_next_send_wqe(cqp, scratch);
- if (wqe)
+ if (!wqe)
return I40IW_ERR_RING_FULL;
set_64bit_val(wqe, 32, feat_mem->pa);
int i;
for (i = 0; i < ARRAY_SIZE(pdefault_rules->rules_create_list); i++) {
+ union ib_flow_spec ib_spec = {};
int ret;
- union ib_flow_spec ib_spec;
+
switch (pdefault_rules->rules_create_list[i]) {
case 0:
/* no rule */
rdma_ah_set_path_bits(ah_attr, path->grh_mlid & 0x7f);
rdma_ah_set_static_rate(ah_attr,
path->static_rate ? path->static_rate - 5 : 0);
- if (path->grh_mlid & (1 << 7)) {
+
+ if (path->grh_mlid & (1 << 7) ||
+ ah_attr->type == RDMA_AH_ATTR_TYPE_ROCE) {
u32 tc_fl = be32_to_cpu(path->tclass_flowlabel);
rdma_ah_set_grh(ah_attr, NULL,
*/
if (udata && udata->outlen >= sizeof(__u64)) {
cq->ip = rvt_create_mmap_info(rdi, sz, udata, u_wc);
- if (!cq->ip) {
- err = -ENOMEM;
+ if (IS_ERR(cq->ip)) {
+ err = PTR_ERR(cq->ip);
goto bail_wc;
}
* @udata: user data (must be valid!)
* @obj: opaque pointer to a cq, wq etc
*
- * Return: rvt_mmap struct on success
+ * Return: rvt_mmap struct on success, ERR_PTR on failure
*/
struct rvt_mmap_info *rvt_create_mmap_info(struct rvt_dev_info *rdi, u32 size,
struct ib_udata *udata, void *obj)
ip = kmalloc_node(sizeof(*ip), GFP_KERNEL, rdi->dparms.node);
if (!ip)
- return ip;
+ return ERR_PTR(-ENOMEM);
size = PAGE_ALIGN(size);
qp->ip = rvt_create_mmap_info(rdi, s, udata,
qp->r_rq.wq);
- if (!qp->ip) {
- ret = ERR_PTR(-ENOMEM);
+ if (IS_ERR(qp->ip)) {
+ ret = ERR_CAST(qp->ip);
goto bail_qpn;
}
u32 s = sizeof(struct rvt_rwq) + srq->rq.size * sz;
srq->ip = rvt_create_mmap_info(dev, s, udata, srq->rq.wq);
- if (!srq->ip) {
- ret = -ENOMEM;
+ if (IS_ERR(srq->ip)) {
+ ret = PTR_ERR(srq->ip);
goto bail_wq;
}
{
struct ib_mr *base_mr = (struct ib_mr *)(uintptr_t)sqe->base_mr;
struct siw_device *sdev = to_siw_dev(pd->device);
- struct siw_mem *mem = siw_mem_id2obj(sdev, sqe->rkey >> 8);
+ struct siw_mem *mem;
int rv = 0;
siw_dbg_pd(pd, "STag 0x%08x\n", sqe->rkey);
- if (unlikely(!mem || !base_mr)) {
+ if (unlikely(!base_mr)) {
pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
return -EINVAL;
}
+
if (unlikely(base_mr->rkey >> 8 != sqe->rkey >> 8)) {
pr_warn("siw: fastreg: STag 0x%08x: bad MR\n", sqe->rkey);
- rv = -EINVAL;
- goto out;
+ return -EINVAL;
}
+
+ mem = siw_mem_id2obj(sdev, sqe->rkey >> 8);
+ if (unlikely(!mem)) {
+ pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
+ return -EINVAL;
+ }
+
if (unlikely(mem->pd != pd)) {
pr_warn("siw: fastreg: PD mismatch\n");
rv = -EINVAL;
if (!cmd)
return;
+ memset(cmd, 0, sizeof(*cmd));
+
if (vote_x == 0 && vote_y == 0)
valid = false;
* Set the wait for completion flag on command that need to be completed
* before the next command.
*/
- if (commit)
- cmd->wait = true;
+ cmd->wait = commit;
}
static void tcs_list_gen(struct list_head *bcm_list, int bucket,
}
hw = to_me_hw(dev);
hw->mem_addr = pcim_iomap_table(pdev)[0];
- hw->irq = pdev->irq;
hw->read_fws = mei_me_read_fws;
pci_enable_msi(pdev);
+ hw->irq = pdev->irq;
+
/* request and enable interrupt */
irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED;
config VOP
tristate "VOP Driver"
- depends on VOP_BUS
+ depends on VOP_BUS && VHOST_DPN
select VHOST_RING
select VIRTIO
help
config CAIF_VIRTIO
tristate "CAIF virtio transport driver"
- depends on CAIF && HAS_DMA
+ depends on CAIF && HAS_DMA && VHOST_DPN
select VHOST_RING
select VIRTIO
select GENERIC_ALLOCATOR
reg |= ARLTBL_RW;
else
reg &= ~ARLTBL_RW;
+ if (dev->vlan_enabled)
+ reg &= ~ARLTBL_IVL_SVL_SELECT;
+ else
+ reg |= ARLTBL_IVL_SVL_SELECT;
b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
return b53_arl_op_wait(dev);
u16 vid, struct b53_arl_entry *ent, u8 *idx,
bool is_valid)
{
+ DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
unsigned int i;
int ret;
if (ret)
return ret;
+ bitmap_zero(free_bins, dev->num_arl_entries);
+
/* Read the bins */
for (i = 0; i < dev->num_arl_entries; i++) {
u64 mac_vid;
B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
b53_arl_to_entry(ent, mac_vid, fwd_entry);
- if (!(fwd_entry & ARLTBL_VALID))
+ if (!(fwd_entry & ARLTBL_VALID)) {
+ set_bit(i, free_bins);
continue;
+ }
if ((mac_vid & ARLTBL_MAC_MASK) != mac)
continue;
+ if (dev->vlan_enabled &&
+ ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
+ continue;
*idx = i;
+ return 0;
}
+ if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+ return -ENOSPC;
+
+ *idx = find_first_bit(free_bins, dev->num_arl_entries);
+
return -ENOENT;
}
if (op)
return ret;
- /* We could not find a matching MAC, so reset to a new entry */
- if (ret) {
+ switch (ret) {
+ case -ENOSPC:
+ dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+ addr, vid);
+ return is_valid ? ret : 0;
+ case -ENOENT:
+ /* We could not find a matching MAC, so reset to a new entry */
+ dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+ addr, vid, idx);
fwd_entry = 0;
- idx = 1;
+ break;
+ default:
+ dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+ addr, vid, idx);
+ break;
}
/* For multicast address, the port is a bitmask and the validity
ent.is_valid = !!(ent.port);
}
- ent.is_valid = is_valid;
ent.vid = vid;
ent.is_static = true;
ent.is_age = false;
/* ARL Table Read/Write Register (8 bit) */
#define B53_ARLTBL_RW_CTRL 0x00
#define ARLTBL_RW BIT(0)
+#define ARLTBL_IVL_SVL_SELECT BIT(6)
#define ARLTBL_START_DONE BIT(7)
/* MAC Address Index Register (48 bit) */
*
* BCM5325 and BCM5365 share most definitions below
*/
-#define B53_ARLTBL_MAC_VID_ENTRY(n) (0x10 * (n))
+#define B53_ARLTBL_MAC_VID_ENTRY(n) ((0x10 * (n)) + 0x10)
#define ARLTBL_MAC_MASK 0xffffffffffffULL
#define ARLTBL_VID_S 48
#define ARLTBL_VID_MASK_25 0xff
#define ARLTBL_VALID_25 BIT(63)
/* ARL Table Data Entry N Registers (32 bit) */
-#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x08)
+#define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18)
#define ARLTBL_DATA_PORT_ID_MASK 0x1ff
#define ARLTBL_TC(tc) ((3 & tc) << 11)
#define ARLTBL_AGE BIT(14)
#define ARLTBL_STATIC BIT(15)
#define ARLTBL_VALID BIT(16)
+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES 4
+
/* ARL Search Control Register (8 bit) */
#define B53_ARL_SRCH_CTL 0x50
#define B53_ARL_SRCH_CTL_25 0x20
dma_addr_t mapping;
/* Allocate a new SKB for a new packet */
- skb = netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH);
+ skb = __netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH,
+ GFP_ATOMIC | __GFP_NOWARN);
if (!skb) {
priv->mib.alloc_rx_buff_failed++;
netif_err(priv, rx_err, ndev, "SKB alloc failed\n");
priv->wol_irq = platform_get_irq(pdev, 1);
}
if (priv->irq0 <= 0 || (priv->irq1 <= 0 && !priv->is_lite)) {
- dev_err(&pdev->dev, "invalid interrupts\n");
ret = -EINVAL;
goto err_free_netdev;
}
{
struct device_node *np = pdev->dev.of_node;
struct bgmac *bgmac;
- struct resource *regs;
const u8 *mac_addr;
bgmac = bgmac_alloc(&pdev->dev);
if (bgmac->irq < 0)
return bgmac->irq;
- regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "amac_base");
- if (!regs) {
- dev_err(&pdev->dev, "Unable to obtain base resource\n");
- return -EINVAL;
- }
-
- bgmac->plat.base = devm_ioremap_resource(&pdev->dev, regs);
+ bgmac->plat.base =
+ devm_platform_ioremap_resource_byname(pdev, "amac_base");
if (IS_ERR(bgmac->plat.base))
return PTR_ERR(bgmac->plat.base);
- regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "idm_base");
- if (regs) {
- bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs);
- if (IS_ERR(bgmac->plat.idm_base))
- return PTR_ERR(bgmac->plat.idm_base);
- bgmac->feature_flags &= ~BGMAC_FEAT_IDM_MASK;
- }
+ bgmac->plat.idm_base =
+ devm_platform_ioremap_resource_byname(pdev, "idm_base");
+ if (IS_ERR(bgmac->plat.idm_base))
+ return PTR_ERR(bgmac->plat.idm_base);
+ bgmac->feature_flags &= ~BGMAC_FEAT_IDM_MASK;
- regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nicpm_base");
- if (regs) {
- bgmac->plat.nicpm_base = devm_ioremap_resource(&pdev->dev,
- regs);
- if (IS_ERR(bgmac->plat.nicpm_base))
- return PTR_ERR(bgmac->plat.nicpm_base);
- }
+ bgmac->plat.nicpm_base =
+ devm_platform_ioremap_resource_byname(pdev, "nicpm_base");
+ if (IS_ERR(bgmac->plat.nicpm_base))
+ return PTR_ERR(bgmac->plat.nicpm_base);
bgmac->read = platform_bgmac_read;
bgmac->write = platform_bgmac_write;
if (netif_running(dev))
bcmgenet_update_mib_counters(priv);
+ dev->netdev_ops->ndo_get_stats(dev);
+
for (i = 0; i < BCMGENET_STATS_LEN; i++) {
const struct bcmgenet_stats *s;
char *p;
dma_addr_t mapping;
/* Allocate a new Rx skb */
- skb = netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT);
+ skb = __netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT,
+ GFP_ATOMIC | __GFP_NOWARN);
if (!skb) {
priv->mib.alloc_rx_buff_failed++;
netif_err(priv, rx_err, priv->dev,
dev->stats.rx_packets = rx_packets;
dev->stats.rx_errors = rx_errors;
dev->stats.rx_missed_errors = rx_errors;
+ dev->stats.rx_dropped = rx_dropped;
return &dev->stats;
}
}
}
-static unsigned long cudbg_mem_region_size(struct cudbg_init *pdbg_init,
- struct cudbg_error *cudbg_err,
- u8 mem_type)
+static int cudbg_mem_region_size(struct cudbg_init *pdbg_init,
+ struct cudbg_error *cudbg_err,
+ u8 mem_type, unsigned long *region_size)
{
struct adapter *padap = pdbg_init->adap;
struct cudbg_meminfo mem_info;
memset(&mem_info, 0, sizeof(struct cudbg_meminfo));
rc = cudbg_fill_meminfo(padap, &mem_info);
- if (rc)
+ if (rc) {
+ cudbg_err->sys_err = rc;
return rc;
+ }
cudbg_t4_fwcache(pdbg_init, cudbg_err);
rc = cudbg_meminfo_get_mem_index(padap, &mem_info, mem_type, &mc_idx);
- if (rc)
+ if (rc) {
+ cudbg_err->sys_err = rc;
return rc;
+ }
+
+ if (region_size)
+ *region_size = mem_info.avail[mc_idx].limit -
+ mem_info.avail[mc_idx].base;
- return mem_info.avail[mc_idx].limit - mem_info.avail[mc_idx].base;
+ return 0;
}
static int cudbg_collect_mem_region(struct cudbg_init *pdbg_init,
struct cudbg_error *cudbg_err,
u8 mem_type)
{
- unsigned long size = cudbg_mem_region_size(pdbg_init, cudbg_err, mem_type);
+ unsigned long size = 0;
+ int rc;
+
+ rc = cudbg_mem_region_size(pdbg_init, cudbg_err, mem_type, &size);
+ if (rc)
+ return rc;
return cudbg_read_fw_mem(pdbg_init, dbg_buff, mem_type, size,
cudbg_err);
*/
static int cxgb4_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
- struct adapter *adapter = (struct adapter *)container_of(ptp,
- struct adapter, ptp_clock_info);
- struct fw_ptp_cmd c;
+ struct adapter *adapter = container_of(ptp, struct adapter,
+ ptp_clock_info);
u64 ns;
- int err;
-
- memset(&c, 0, sizeof(c));
- c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
- FW_CMD_REQUEST_F |
- FW_CMD_READ_F |
- FW_PTP_CMD_PORTID_V(0));
- c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
- c.u.ts.sc = FW_PTP_SC_GET_TIME;
- err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), &c);
- if (err < 0) {
- dev_err(adapter->pdev_dev,
- "PTP: %s error %d\n", __func__, -err);
- return err;
- }
+ ns = t4_read_reg(adapter, T5_PORT_REG(0, MAC_PORT_PTP_SUM_LO_A));
+ ns |= (u64)t4_read_reg(adapter,
+ T5_PORT_REG(0, MAC_PORT_PTP_SUM_HI_A)) << 32;
/* convert to timespec*/
- ns = be64_to_cpu(c.u.ts.tm);
*ts = ns_to_timespec64(ns);
-
- return err;
+ return 0;
}
/**
#define MAC_PORT_CFG2_A 0x818
+#define MAC_PORT_PTP_SUM_LO_A 0x990
+#define MAC_PORT_PTP_SUM_HI_A 0x994
+
#define MPS_CMN_CTL_A 0x9000
#define COUNTPAUSEMCRX_S 5
if (hw->mac_type == e1000_82545 ||
hw->mac_type == e1000_ce4100 ||
hw->mac_type == e1000_82546) {
- return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
+ return ((begin ^ (end - 1)) >> 16) == 0;
}
return true;
}
}
if (lut) {
- bool pf_lut = vsi->type == I40E_VSI_MAIN ? true : false;
+ bool pf_lut = vsi->type == I40E_VSI_MAIN;
ret = i40e_aq_set_rss_lut(hw, vsi->id, pf_lut, lut, lut_size);
if (ret) {
}
if (lut) {
- bool pf_lut = vsi->type == I40E_VSI_MAIN ? true : false;
+ bool pf_lut = vsi->type == I40E_VSI_MAIN;
ret = i40e_aq_get_rss_lut(hw, vsi->id, pf_lut, lut, lut_size);
if (ret) {
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/moduleparam.h>
+#include <linux/indirect_call_wrapper.h>
#include "mlx4_en.h"
}
}
+INDIRECT_CALLABLE_DECLARE(u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
+ struct mlx4_en_tx_ring *ring,
+ int index, u64 timestamp,
+ int napi_mode));
u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
return tx_info->nr_txbb;
}
+INDIRECT_CALLABLE_DECLARE(u32 mlx4_en_recycle_tx_desc(struct mlx4_en_priv *priv,
+ struct mlx4_en_tx_ring *ring,
+ int index, u64 timestamp,
+ int napi_mode));
+
u32 mlx4_en_recycle_tx_desc(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring,
int index, u64 timestamp,
timestamp = mlx4_en_get_cqe_ts(cqe);
/* free next descriptor */
- last_nr_txbb = ring->free_tx_desc(
+ last_nr_txbb = INDIRECT_CALL_2(ring->free_tx_desc,
+ mlx4_en_free_tx_desc,
+ mlx4_en_recycle_tx_desc,
priv, ring, ring_index,
timestamp, napi_budget);
tristate "Mellanox 5th generation network adapters (ConnectX series) core driver"
depends on PCI
select NET_DEVLINK
- imply PTP_1588_CLOCK
- imply VXLAN
- imply MLXFW
- imply PCI_HYPERV_INTERFACE
+ depends on VXLAN || !VXLAN
+ depends on MLXFW || !MLXFW
+ depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
+ depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
default n
---help---
Core driver for low level functionality of the ConnectX-4 and
return NULL;
}
- tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
+ tracer = kvzalloc(sizeof(*tracer), GFP_KERNEL);
if (!tracer)
return ERR_PTR(-ENOMEM);
tracer->dev = NULL;
destroy_workqueue(tracer->work_queue);
free_tracer:
- kfree(tracer);
+ kvfree(tracer);
return ERR_PTR(err);
}
mlx5_fw_tracer_destroy_log_buf(tracer);
flush_workqueue(tracer->work_queue);
destroy_workqueue(tracer->work_queue);
- kfree(tracer);
+ kvfree(tracer);
}
static int fw_tracer_event(struct notifier_block *nb, unsigned long action, void *data)
MLX5E_SQ_STATE_AM,
MLX5E_SQ_STATE_TLS,
MLX5E_SQ_STATE_VLAN_NEED_L2_INLINE,
+ MLX5E_SQ_STATE_PENDING_XSK_TX,
};
struct mlx5e_sq_wqe_info {
void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe);
void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe);
bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq);
-void mlx5e_poll_ico_cq(struct mlx5e_cq *cq);
+int mlx5e_poll_ico_cq(struct mlx5e_cq *cq);
bool mlx5e_post_rx_mpwqes(struct mlx5e_rq *rq);
void mlx5e_dealloc_rx_wqe(struct mlx5e_rq *rq, u16 ix);
void mlx5e_dealloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix);
#include <net/flow_offload.h>
#include <net/netfilter/nf_flow_table.h>
#include <linux/workqueue.h>
+#include <linux/xarray.h>
#include "esw/chains.h"
#include "en/tc_ct.h"
struct mlx5_eswitch *esw;
const struct net_device *netdev;
struct idr fte_ids;
- struct idr tuple_ids;
+ struct xarray tuple_ids;
struct rhashtable zone_ht;
struct mlx5_flow_table *ct;
struct mlx5_flow_table *ct_nat;
mlx5_eswitch_del_offloaded_rule(esw, zone_rule->rule, attr);
mlx5_modify_header_dealloc(esw->dev, attr->modify_hdr);
- idr_remove(&ct_priv->tuple_ids, zone_rule->tupleid);
+ xa_erase(&ct_priv->tuple_ids, zone_rule->tupleid);
}
static void
struct mlx5_esw_flow_attr *attr = &zone_rule->attr;
struct mlx5_eswitch *esw = ct_priv->esw;
struct mlx5_flow_spec *spec = NULL;
- u32 tupleid = 1;
+ u32 tupleid;
int err;
zone_rule->nat = nat;
return -ENOMEM;
/* Get tuple unique id */
- err = idr_alloc_u32(&ct_priv->tuple_ids, zone_rule, &tupleid,
- TUPLE_ID_MAX, GFP_KERNEL);
+ err = xa_alloc(&ct_priv->tuple_ids, &tupleid, zone_rule,
+ XA_LIMIT(1, TUPLE_ID_MAX), GFP_KERNEL);
if (err) {
netdev_warn(ct_priv->netdev,
"Failed to allocate tuple id, err: %d\n", err);
- goto err_idr_alloc;
+ goto err_xa_alloc;
}
zone_rule->tupleid = tupleid;
err_rule:
mlx5_modify_header_dealloc(esw->dev, attr->modify_hdr);
err_mod_hdr:
- idr_remove(&ct_priv->tuple_ids, zone_rule->tupleid);
-err_idr_alloc:
+ xa_erase(&ct_priv->tuple_ids, zone_rule->tupleid);
+err_xa_alloc:
kfree(spec);
return err;
}
}
idr_init(&ct_priv->fte_ids);
- idr_init(&ct_priv->tuple_ids);
+ xa_init_flags(&ct_priv->tuple_ids, XA_FLAGS_ALLOC1);
mutex_init(&ct_priv->control_lock);
rhashtable_init(&ct_priv->zone_ht, &zone_params);
rhashtable_destroy(&ct_priv->zone_ht);
mutex_destroy(&ct_priv->control_lock);
- idr_destroy(&ct_priv->tuple_ids);
+ xa_destroy(&ct_priv->tuple_ids);
idr_destroy(&ct_priv->fte_ids);
kfree(ct_priv);
if (!ct_priv || !tupleid)
return true;
- zone_rule = idr_find(&ct_priv->tuple_ids, tupleid);
+ zone_rule = xa_load(&ct_priv->tuple_ids, tupleid);
if (!zone_rule)
return false;
if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &c->xskicosq.state)))
return 0;
+ if (test_and_set_bit(MLX5E_SQ_STATE_PENDING_XSK_TX, &c->xskicosq.state))
+ return 0;
+
spin_lock(&c->xskicosq_lock);
mlx5e_trigger_irq(&c->xskicosq);
spin_unlock(&c->xskicosq_lock);
struct mlx5e_vport_stats *vstats = &priv->stats.vport;
struct mlx5e_pport_stats *pstats = &priv->stats.pport;
- if (!mlx5e_monitor_counter_supported(priv)) {
+ /* In switchdev mode, monitor counters doesn't monitor
+ * rx/tx stats of 802_3. The update stats mechanism
+ * should keep the 802_3 layout counters updated
+ */
+ if (!mlx5e_monitor_counter_supported(priv) ||
+ mlx5e_is_uplink_rep(priv)) {
/* update HW stats in background for next time */
mlx5e_queue_update_stats(priv);
}
return !!err;
}
-void mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
+int mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
{
struct mlx5e_icosq *sq = container_of(cq, struct mlx5e_icosq, cq);
struct mlx5_cqe64 *cqe;
int i;
if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &sq->state)))
- return;
+ return 0;
cqe = mlx5_cqwq_get_cqe(&cq->wq);
if (likely(!cqe))
- return;
+ return 0;
/* sq->cc must be updated only after mlx5_cqwq_update_db_record(),
* otherwise a cq overrun may occur
sq->cc = sqcc;
mlx5_cqwq_update_db_record(&cq->wq);
+
+ return i;
}
bool mlx5e_post_rx_mpwqes(struct mlx5e_rq *rq)
mlx5e_post_rx_wqes,
rq);
if (xsk_open) {
- mlx5e_poll_ico_cq(&c->xskicosq.cq);
+ if (mlx5e_poll_ico_cq(&c->xskicosq.cq))
+ /* Don't clear the flag if nothing was polled to prevent
+ * queueing more WQEs and overflowing XSKICOSQ.
+ */
+ clear_bit(MLX5E_SQ_STATE_PENDING_XSK_TX, &c->xskicosq.state);
busy |= mlx5e_poll_xdpsq_cq(&xsksq->cq);
busy_xsk |= mlx5e_napi_xsk_post(xsksq, xskrq);
}
block = kzalloc(sizeof(*block), GFP_KERNEL);
if (!block)
- return NULL;
+ return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&block->resource_list);
block->afa = mlxsw_afa;
mlxsw_afa_set_destroy(block->first_set);
err_first_set_create:
kfree(block);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
EXPORT_SYMBOL(mlxsw_afa_block_create);
* to be written using PEFA register to all indexes for all regions.
*/
afa_block = mlxsw_afa_block_create(mlxsw_sp->afa);
- if (!afa_block) {
- err = -ENOMEM;
+ if (IS_ERR(afa_block)) {
+ err = PTR_ERR(afa_block);
goto err_afa_block;
}
err = mlxsw_afa_block_continue(afa_block);
rulei = kzalloc(sizeof(*rulei), GFP_KERNEL);
if (!rulei)
- return NULL;
+ return ERR_PTR(-ENOMEM);
if (afa_block) {
rulei->act_block = afa_block;
int err;
afa_block = mlxsw_afa_block_create(mlxsw_sp->afa);
- if (!afa_block)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(afa_block))
+ return afa_block;
err = mlxsw_afa_block_append_allocated_counter(afa_block,
counter_index);
-
-/*
- * snull.h -- definitions for the network module
- *
- * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
- * Copyright (C) 2001 O'Reilly & Associates
- *
- * The source code in this file can be freely used, adapted,
- * and redistributed in source or binary form, so long as an
- * acknowledgment appears in derived source files. The citation
- * should list that the code comes from the book "Linux Device
- * Drivers" by Alessandro Rubini and Jonathan Corbet, published
- * by O'Reilly & Associates. No warranty is attached;
- * we cannot take responsibility for errors or fitness for use.
- */
-
/* version dependencies have been confined to a separate file */
/* Tunable parameters */
#include <linux/clk-provider.h>
#include <linux/pci.h>
#include <linux/dmi.h>
+#include "dwmac-intel.h"
#include "stmmac.h"
+struct intel_priv_data {
+ int mdio_adhoc_addr; /* mdio address for serdes & etc */
+};
+
/* This struct is used to associate PCI Function of MAC controller on a board,
* discovered via DMI, with the address of PHY connected to the MAC. The
* negative value of the address means that MAC controller is not connected
return -ENODEV;
}
+static int serdes_status_poll(struct stmmac_priv *priv, int phyaddr,
+ int phyreg, u32 mask, u32 val)
+{
+ unsigned int retries = 10;
+ int val_rd;
+
+ do {
+ val_rd = mdiobus_read(priv->mii, phyaddr, phyreg);
+ if ((val_rd & mask) == (val & mask))
+ return 0;
+ udelay(POLL_DELAY_US);
+ } while (--retries);
+
+ return -ETIMEDOUT;
+}
+
+static int intel_serdes_powerup(struct net_device *ndev, void *priv_data)
+{
+ struct intel_priv_data *intel_priv = priv_data;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int serdes_phy_addr = 0;
+ u32 data = 0;
+
+ if (!intel_priv->mdio_adhoc_addr)
+ return 0;
+
+ serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+
+ /* assert clk_req */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data |= SERDES_PLL_CLK;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for clk_ack assertion */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PLL_CLK,
+ SERDES_PLL_CLK);
+
+ if (data) {
+ dev_err(priv->device, "Serdes PLL clk request timeout\n");
+ return data;
+ }
+
+ /* assert lane reset */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data |= SERDES_RST;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for assert lane reset reflection */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_RST,
+ SERDES_RST);
+
+ if (data) {
+ dev_err(priv->device, "Serdes assert lane reset timeout\n");
+ return data;
+ }
+
+ /* move power state to P0 */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_PWR_ST_MASK;
+ data |= SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* Check for P0 state */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PWR_ST_MASK,
+ SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT);
+
+ if (data) {
+ dev_err(priv->device, "Serdes power state P0 timeout.\n");
+ return data;
+ }
+
+ return 0;
+}
+
+static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
+{
+ struct intel_priv_data *intel_priv = intel_data;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int serdes_phy_addr = 0;
+ u32 data = 0;
+
+ if (!intel_priv->mdio_adhoc_addr)
+ return;
+
+ serdes_phy_addr = intel_priv->mdio_adhoc_addr;
+
+ /* move power state to P3 */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_PWR_ST_MASK;
+ data |= SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* Check for P3 state */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PWR_ST_MASK,
+ SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT);
+
+ if (data) {
+ dev_err(priv->device, "Serdes power state P3 timeout\n");
+ return;
+ }
+
+ /* de-assert clk_req */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_PLL_CLK;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for clk_ack de-assert */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_PLL_CLK,
+ (u32)~SERDES_PLL_CLK);
+
+ if (data) {
+ dev_err(priv->device, "Serdes PLL clk de-assert timeout\n");
+ return;
+ }
+
+ /* de-assert lane reset */
+ data = mdiobus_read(priv->mii, serdes_phy_addr,
+ SERDES_GCR0);
+
+ data &= ~SERDES_RST;
+
+ mdiobus_write(priv->mii, serdes_phy_addr,
+ SERDES_GCR0, data);
+
+ /* check for de-assert lane reset reflection */
+ data = serdes_status_poll(priv, serdes_phy_addr,
+ SERDES_GSR0,
+ SERDES_RST,
+ (u32)~SERDES_RST);
+
+ if (data) {
+ dev_err(priv->device, "Serdes de-assert lane reset timeout\n");
+ return;
+ }
+}
+
static void common_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
+
return ehl_common_data(pdev, plat);
}
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
return ehl_pse0_common_data(pdev, plat);
}
struct plat_stmmacenet_data *plat)
{
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
return ehl_pse1_common_data(pdev, plat);
}
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ plat->serdes_powerup = intel_serdes_powerup;
+ plat->serdes_powerdown = intel_serdes_powerdown;
return tgl_common_data(pdev, plat);
}
const struct pci_device_id *id)
{
struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
+ struct intel_priv_data *intel_priv;
struct plat_stmmacenet_data *plat;
struct stmmac_resources res;
int i;
int ret;
+ intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv),
+ GFP_KERNEL);
+ if (!intel_priv)
+ return -ENOMEM;
+
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
return -ENOMEM;
pci_set_master(pdev);
+ plat->bsp_priv = intel_priv;
+ intel_priv->mdio_adhoc_addr = 0x15;
+
ret = info->setup(pdev, plat);
if (ret)
return ret;
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2020, Intel Corporation
+ * DWMAC Intel header file
+ */
+
+#ifndef __DWMAC_INTEL_H__
+#define __DWMAC_INTEL_H__
+
+#define POLL_DELAY_US 8
+
+/* SERDES Register */
+#define SERDES_GSR0 0x5 /* Global Status Reg0 */
+#define SERDES_GCR0 0xb /* Global Configuration Reg0 */
+
+/* SERDES defines */
+#define SERDES_PLL_CLK BIT(0) /* PLL clk valid signal */
+#define SERDES_RST BIT(2) /* Serdes Reset */
+#define SERDES_PWR_ST_MASK GENMASK(6, 4) /* Serdes Power state*/
+#define SERDES_PWR_ST_SHIFT 4
+#define SERDES_PWR_ST_P0 0x0
+#define SERDES_PWR_ST_P3 0x3
+
+#endif /* __DWMAC_INTEL_H__ */
{ .div = 5, .val = 5, },
{ .div = 6, .val = 6, },
{ .div = 7, .val = 7, },
+ { /* end of array */ }
};
clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
phymode == PHY_INTERFACE_MODE_MII ||
phymode == PHY_INTERFACE_MODE_GMII ||
phymode == PHY_INTERFACE_MODE_SGMII) {
- ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
&module);
module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
module);
- } else {
- ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
}
+ if (dwmac->f2h_ptp_ref_clk)
+ ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+ else
+ ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
+ (reg_shift / 2));
+
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
/* Deassert reset for the phy configuration to be sampled by
unsigned long data;
u32 reg_value;
- /* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second
- * formula = (1/ptp_clock) * 1000000000
- * where ptp_clock is 50MHz if fine method is used to update system
+ /* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second
+ * increment to twice the number of nanoseconds of a clock cycle.
+ * The calculation of the default_addend value by the caller will set it
+ * to mid-range = 2^31 when the remainder of this division is zero,
+ * which will make the accumulator overflow once every 2 ptp_clock
+ * cycles, adding twice the number of nanoseconds of a clock cycle :
+ * 2000000000ULL / ptp_clock.
*/
if (value & PTP_TCR_TSCFUPDT)
- data = (1000000000ULL / 50000000);
+ data = (2000000000ULL / ptp_clock);
else
data = (1000000000ULL / ptp_clock);
goto error_netdev_register;
}
+ if (priv->plat->serdes_powerup) {
+ ret = priv->plat->serdes_powerup(ndev,
+ priv->plat->bsp_priv);
+
+ if (ret < 0)
+ return ret;
+ }
+
#ifdef CONFIG_DEBUG_FS
stmmac_init_fs(ndev);
#endif
stmmac_stop_all_dma(priv);
+ if (priv->plat->serdes_powerdown)
+ priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
+
stmmac_mac_set(priv, priv->ioaddr, false);
netif_carrier_off(ndev);
unregister_netdev(ndev);
/* Stop TX/RX DMA */
stmmac_stop_all_dma(priv);
+ if (priv->plat->serdes_powerdown)
+ priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
+
/* Enable Power down mode by programming the PMT regs */
if (device_may_wakeup(priv->device)) {
stmmac_pmt(priv, priv->hw, priv->wolopts);
{
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
+ int ret;
if (!netif_running(ndev))
return 0;
stmmac_mdio_reset(priv->mii);
}
+ if (priv->plat->serdes_powerup) {
+ ret = priv->plat->serdes_powerup(ndev,
+ priv->plat->bsp_priv);
+
+ if (ret < 0)
+ return ret;
+ }
+
netif_device_attach(ndev);
mutex_lock(&priv->lock);
return -ENODEV;
regs_phys = res->start;
port->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(port->regs))
+ return PTR_ERR(port->regs);
switch (port->id) {
case IXP4XX_ETH_NPEA:
enum ifla_geneve_df df = nla_get_u8(data[IFLA_GENEVE_DF]);
if (df < 0 || df > GENEVE_DF_MAX) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_GENEVE_DF],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_GENEVE_DF],
"Invalid DF attribute");
return -EINVAL;
}
struct netlink_ext_ack *extack)
{
struct macsec_dev *macsec = macsec_priv(dev);
+ rx_handler_func_t *rx_handler;
+ u8 icv_len = DEFAULT_ICV_LEN;
struct net_device *real_dev;
- int err;
+ int err, mtu;
sci_t sci;
- u8 icv_len = DEFAULT_ICV_LEN;
- rx_handler_func_t *rx_handler;
if (!tb[IFLA_LINK])
return -EINVAL;
if (data && data[IFLA_MACSEC_ICV_LEN])
icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
- dev->mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+ mtu = real_dev->mtu - icv_len - macsec_extra_len(true);
+ if (mtu < 0)
+ dev->mtu = 0;
+ else
+ dev->mtu = mtu;
rx_handler = rtnl_dereference(real_dev->rx_handler);
if (rx_handler && rx_handler != macsec_handle_frame)
struct macvlan_dev,
list);
- if (macvlan_sync_address(vlan->dev, dev->dev_addr))
+ if (vlan && macvlan_sync_address(vlan->dev, dev->dev_addr))
return NOTIFY_BAD;
break;
if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
phydev->link = false;
- if (!phydev->link)
- return 0;
-
linkmode_zero(phydev->lp_advertising);
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
phydev->asym_pause = 0;
phydev->mdix = 0;
+ if (!phydev->link)
+ return 0;
+
if (phydev->autoneg_complete) {
val = genphy_c45_read_lpa(phydev);
if (val < 0)
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
MV_V2_PORT_CTRL_PWRDOWN);
- if (priv->firmware_ver < 0x00030000)
+ if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 ||
+ priv->firmware_ver < 0x00030000)
return ret;
return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/mii.h>
#include <linux/phy.h>
+/* External Register Control Register */
+#define LAN87XX_EXT_REG_CTL (0x14)
+#define LAN87XX_EXT_REG_CTL_RD_CTL (0x1000)
+#define LAN87XX_EXT_REG_CTL_WR_CTL (0x0800)
+
+/* External Register Read Data Register */
+#define LAN87XX_EXT_REG_RD_DATA (0x15)
+
+/* External Register Write Data Register */
+#define LAN87XX_EXT_REG_WR_DATA (0x16)
+
/* Interrupt Source Register */
#define LAN87XX_INTERRUPT_SOURCE (0x18)
#define LAN87XX_MASK_LINK_UP (0x0004)
#define LAN87XX_MASK_LINK_DOWN (0x0002)
+/* phyaccess nested types */
+#define PHYACC_ATTR_MODE_READ 0
+#define PHYACC_ATTR_MODE_WRITE 1
+#define PHYACC_ATTR_MODE_MODIFY 2
+
+#define PHYACC_ATTR_BANK_SMI 0
+#define PHYACC_ATTR_BANK_MISC 1
+#define PHYACC_ATTR_BANK_PCS 2
+#define PHYACC_ATTR_BANK_AFE 3
+#define PHYACC_ATTR_BANK_MAX 7
+
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
#define DRIVER_DESC "Microchip LAN87XX T1 PHY driver"
+struct access_ereg_val {
+ u8 mode;
+ u8 bank;
+ u8 offset;
+ u16 val;
+ u16 mask;
+};
+
+static int access_ereg(struct phy_device *phydev, u8 mode, u8 bank,
+ u8 offset, u16 val)
+{
+ u16 ereg = 0;
+ int rc = 0;
+
+ if (mode > PHYACC_ATTR_MODE_WRITE || bank > PHYACC_ATTR_BANK_MAX)
+ return -EINVAL;
+
+ if (bank == PHYACC_ATTR_BANK_SMI) {
+ if (mode == PHYACC_ATTR_MODE_WRITE)
+ rc = phy_write(phydev, offset, val);
+ else
+ rc = phy_read(phydev, offset);
+ return rc;
+ }
+
+ if (mode == PHYACC_ATTR_MODE_WRITE) {
+ ereg = LAN87XX_EXT_REG_CTL_WR_CTL;
+ rc = phy_write(phydev, LAN87XX_EXT_REG_WR_DATA, val);
+ if (rc < 0)
+ return rc;
+ } else {
+ ereg = LAN87XX_EXT_REG_CTL_RD_CTL;
+ }
+
+ ereg |= (bank << 8) | offset;
+
+ rc = phy_write(phydev, LAN87XX_EXT_REG_CTL, ereg);
+ if (rc < 0)
+ return rc;
+
+ if (mode == PHYACC_ATTR_MODE_READ)
+ rc = phy_read(phydev, LAN87XX_EXT_REG_RD_DATA);
+
+ return rc;
+}
+
+static int access_ereg_modify_changed(struct phy_device *phydev,
+ u8 bank, u8 offset, u16 val, u16 mask)
+{
+ int new = 0, rc = 0;
+
+ if (bank > PHYACC_ATTR_BANK_MAX)
+ return -EINVAL;
+
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, bank, offset, val);
+ if (rc < 0)
+ return rc;
+
+ new = val | (rc & (mask ^ 0xFFFF));
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE, bank, offset, new);
+
+ return rc;
+}
+
+static int lan87xx_phy_init(struct phy_device *phydev)
+{
+ static const struct access_ereg_val init[] = {
+ /* TX Amplitude = 5 */
+ {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_AFE, 0x0B,
+ 0x000A, 0x001E},
+ /* Clear SMI interrupts */
+ {PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI, 0x18,
+ 0, 0},
+ /* Clear MISC interrupts */
+ {PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_MISC, 0x08,
+ 0, 0},
+ /* Turn on TC10 Ring Oscillator (ROSC) */
+ {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_MISC, 0x20,
+ 0x0020, 0x0020},
+ /* WUR Detect Length to 1.2uS, LPC Detect Length to 1.09uS */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_PCS, 0x20,
+ 0x283C, 0},
+ /* Wake_In Debounce Length to 39uS, Wake_Out Length to 79uS */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x21,
+ 0x274F, 0},
+ /* Enable Auto Wake Forward to Wake_Out, ROSC on, Sleep,
+ * and Wake_In to wake PHY
+ */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x20,
+ 0x80A7, 0},
+ /* Enable WUP Auto Fwd, Enable Wake on MDI, Wakeup Debouncer
+ * to 128 uS
+ */
+ {PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_MISC, 0x24,
+ 0xF110, 0},
+ /* Enable HW Init */
+ {PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_SMI, 0x1A,
+ 0x0100, 0x0100},
+ };
+ int rc, i;
+
+ /* Start manual initialization procedures in Managed Mode */
+ rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+ 0x1a, 0x0000, 0x0100);
+ if (rc < 0)
+ return rc;
+
+ /* Soft Reset the SMI block */
+ rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
+ 0x00, 0x8000, 0x8000);
+ if (rc < 0)
+ return rc;
+
+ /* Check to see if the self-clearing bit is cleared */
+ usleep_range(1000, 2000);
+ rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
+ PHYACC_ATTR_BANK_SMI, 0x00, 0);
+ if (rc < 0)
+ return rc;
+ if ((rc & 0x8000) != 0)
+ return -ETIMEDOUT;
+
+ /* PHY Initialization */
+ for (i = 0; i < ARRAY_SIZE(init); i++) {
+ if (init[i].mode == PHYACC_ATTR_MODE_MODIFY) {
+ rc = access_ereg_modify_changed(phydev, init[i].bank,
+ init[i].offset,
+ init[i].val,
+ init[i].mask);
+ } else {
+ rc = access_ereg(phydev, init[i].mode, init[i].bank,
+ init[i].offset, init[i].val);
+ }
+ if (rc < 0)
+ return rc;
+ }
+
+ return 0;
+}
+
static int lan87xx_phy_config_intr(struct phy_device *phydev)
{
int rc, val = 0;
return rc < 0 ? rc : 0;
}
+static int lan87xx_config_init(struct phy_device *phydev)
+{
+ int rc = lan87xx_phy_init(phydev);
+
+ return rc < 0 ? rc : 0;
+}
+
static struct phy_driver microchip_t1_phy_driver[] = {
{
.phy_id = 0x0007c150,
.features = PHY_BASIC_T1_FEATURES,
+ .config_init = lan87xx_config_init,
.config_aneg = genphy_config_aneg,
.ack_interrupt = lan87xx_phy_ack_interrupt,
struct team_mode_item *mitem;
const struct team_mode *mode = NULL;
+ if (!try_module_get(THIS_MODULE))
+ return NULL;
+
spin_lock(&mode_list_lock);
mitem = __find_mode(kind);
if (!mitem) {
}
spin_unlock(&mode_list_lock);
+ module_put(THIS_MODULE);
return mode;
}
fl6.flowi6_proto = iph->nexthdr;
fl6.flowi6_flags = FLOWI_FLAG_SKIP_NH_OIF;
- dst = ip6_route_output(net, NULL, &fl6);
- if (dst == dst_null)
+ dst = ip6_dst_lookup_flow(net, NULL, &fl6, NULL);
+ if (IS_ERR(dst) || dst == dst_null)
goto err;
skb_dst_drop(skb);
if (rt6_need_strict(&ipv6_hdr(skb)->daddr))
return skb;
- if (qdisc_tx_is_default(vrf_dev))
+ if (qdisc_tx_is_default(vrf_dev) ||
+ IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED)
return vrf_ip6_out_direct(vrf_dev, sk, skb);
return vrf_ip6_out_redirect(vrf_dev, skb);
ipv4_is_lbcast(ip_hdr(skb)->daddr))
return skb;
- if (qdisc_tx_is_default(vrf_dev))
+ if (qdisc_tx_is_default(vrf_dev) ||
+ IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED)
return vrf_ip_out_direct(vrf_dev, sk, skb);
return vrf_ip_out_redirect(vrf_dev, skb);
u32 id = nla_get_u32(data[IFLA_VXLAN_ID]);
if (id >= VXLAN_N_VID) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_ID],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_ID],
"VXLAN ID must be lower than 16777216");
return -ERANGE;
}
= nla_data(data[IFLA_VXLAN_PORT_RANGE]);
if (ntohs(p->high) < ntohs(p->low)) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_PORT_RANGE],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_PORT_RANGE],
"Invalid source port range");
return -EINVAL;
}
enum ifla_vxlan_df df = nla_get_u8(data[IFLA_VXLAN_DF]);
if (df < 0 || df > VXLAN_DF_MAX) {
- NL_SET_ERR_MSG_ATTR(extack, tb[IFLA_VXLAN_DF],
+ NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VXLAN_DF],
"Invalid DF attribute");
return -EINVAL;
}
usb_autopm_put_interface(i2400mu->usb_iface);
d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n",
i2400m, ack, ack_size, (long) result);
+ usb_put_urb(¬if_urb);
return result;
error_exceeded:
}
static void *
-il3945_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+il3945_rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
}
static void *
-il4965_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+il4965_rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
cpu_to_le16(priv->lib->bt_params->agg_time_limit);
}
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
if (!prof->enabled) {
IWL_DEBUG_RADIO(fwrt, "SAR profile %d is disabled.\n",
profs[i]);
- /* if one of the profiles is disabled, we fail all */
- return -ENOENT;
+ /*
+ * if one of the profiles is disabled, we
+ * ignore all of them and return 1 to
+ * differentiate disabled from other failures.
+ */
+ return 1;
}
+
IWL_DEBUG_INFO(fwrt,
"SAR EWRD: chain %d profile index %d\n",
i, profs[i]);
* Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2019 Intel Corporation
+ * Copyright(c) 2019 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
IWL_MVM_DQA_MAX_MGMT_QUEUE = 8,
IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9,
IWL_MVM_DQA_MIN_DATA_QUEUE = 10,
- IWL_MVM_DQA_MAX_DATA_QUEUE = 31,
+ IWL_MVM_DQA_MAX_DATA_QUEUE = 30,
};
enum iwl_mvm_tx_fifo {
kmemdup(pieces->dbg_conf_tlv[i],
pieces->dbg_conf_tlv_len[i],
GFP_KERNEL);
- if (!pieces->dbg_conf_tlv[i])
+ if (!drv->fw.dbg.conf_tlv[i])
goto out_free_fw;
}
}
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
.mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
+ IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP,
.mac_cap_info[3] =
IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
.mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
+ IEEE80211_HE_MAC_CAP2_BSR,
.mac_cap_info[3] =
IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
struct iwl_dev_tx_power_cmd_v4 v4;
} cmd;
+ int ret;
u16 len = 0;
cmd.v5.v3.set_mode = cpu_to_le32(IWL_TX_POWER_MODE_SET_CHAINS);
len = sizeof(cmd.v4.v3);
- if (iwl_sar_select_profile(&mvm->fwrt, cmd.v5.v3.per_chain_restriction,
- prof_a, prof_b))
- return -ENOENT;
+ ret = iwl_sar_select_profile(&mvm->fwrt,
+ cmd.v5.v3.per_chain_restriction,
+ prof_a, prof_b);
+
+ /* return on error or if the profile is disabled (positive number) */
+ if (ret)
+ return ret;
+
IWL_DEBUG_RADIO(mvm, "Sending REDUCE_TX_POWER_CMD per chain\n");
return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, len, &cmd);
}
"EWRD SAR BIOS table invalid or unavailable. (%d)\n",
ret);
- ret = iwl_mvm_sar_select_profile(mvm, 1, 1);
- /*
- * If we don't have profile 0 from BIOS, just skip it. This
- * means that SAR Geo will not be enabled either, even if we
- * have other valid profiles.
- */
- if (ret == -ENOENT)
- return 1;
-
- return ret;
+ return iwl_mvm_sar_select_profile(mvm, 1, 1);
}
static int iwl_mvm_load_rt_fw(struct iwl_mvm *mvm)
ret = iwl_mvm_sar_init(mvm);
if (ret == 0) {
ret = iwl_mvm_sar_geo_init(mvm);
- } else if (ret > 0 && !iwl_sar_get_wgds_table(&mvm->fwrt)) {
+ } else if (ret == -ENOENT && !iwl_sar_get_wgds_table(&mvm->fwrt)) {
/*
* If basic SAR is not available, we check for WGDS,
* which should *not* be available either. If it is
cpu_to_le16(iwl_mvm_coex_agg_time_limit(mvm, sta));
}
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rs_alloc(struct ieee80211_hw *hw)
{
return hw->priv;
}
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
+ * Copyright(c) 2018 - 2020 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
struct iwl_mvm_stat_data {
struct iwl_mvm *mvm;
+ __le32 flags;
__le32 mac_id;
u8 beacon_filter_average_energy;
void *general;
-general->beacon_average_energy[vif_id];
}
+ /* make sure that beacon statistics don't go backwards with TCM
+ * request to clear statistics
+ */
+ if (le32_to_cpu(data->flags) & IWL_STATISTICS_REPLY_FLG_CLEAR)
+ mvmvif->beacon_stats.accu_num_beacons +=
+ mvmvif->beacon_stats.num_beacons;
+
if (mvmvif->id != id)
return;
flags = stats->flag;
}
+ data.flags = flags;
iwl_mvm_rx_stats_check_trigger(mvm, pkt);
lockdep_assert_held(&mvm->mutex);
+ if (WARN(maxq >= mvm->trans->trans_cfg->base_params->num_of_queues,
+ "max queue %d >= num_of_queues (%d)", maxq,
+ mvm->trans->trans_cfg->base_params->num_of_queues))
+ maxq = mvm->trans->trans_cfg->base_params->num_of_queues - 1;
+
/* This should not be hit with new TX path */
if (WARN_ON(iwl_mvm_has_new_tx_api(mvm)))
return -ENOSPC;
inactive_tid_bitmap,
&unshare_queues,
&changetid_queues);
- if (ret >= 0 && free_queue < 0) {
+ if (ret && free_queue < 0) {
queue_owner = sta;
- free_queue = ret;
+ free_queue = i;
}
/* only unlock sta lock - we still need the queue info lock */
spin_unlock_bh(&mvmsta->lock);
int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
trans->cfg->min_txq_size);
+ switch (trans_pcie->rx_buf_size) {
+ case IWL_AMSDU_DEF:
+ return -EINVAL;
+ case IWL_AMSDU_2K:
+ break;
+ case IWL_AMSDU_4K:
+ case IWL_AMSDU_8K:
+ case IWL_AMSDU_12K:
+ control_flags |= IWL_PRPH_SCRATCH_RB_SIZE_4K;
+ break;
+ }
+
/* Allocate prph scratch */
prph_scratch = dma_alloc_coherent(trans->dev, sizeof(*prph_scratch),
&trans_pcie->prph_scratch_dma_addr,
cpu_to_le16((u16)iwl_read32(trans, CSR_HW_REV));
prph_sc_ctrl->version.size = cpu_to_le16(sizeof(*prph_scratch) / 4);
- control_flags = IWL_PRPH_SCRATCH_RB_SIZE_4K |
- IWL_PRPH_SCRATCH_MTR_MODE |
- (IWL_PRPH_MTR_FORMAT_256B &
- IWL_PRPH_SCRATCH_MTR_FORMAT);
+ control_flags |= IWL_PRPH_SCRATCH_MTR_MODE;
+ control_flags |= IWL_PRPH_MTR_FORMAT_256B & IWL_PRPH_SCRATCH_MTR_FORMAT;
/* initialize RX default queue */
prph_sc_ctrl->rbd_cfg.free_rbd_addr =
iwl_pcie_gen2_txq_unmap(trans, queue);
+ iwl_pcie_gen2_txq_free_memory(trans, trans_pcie->txq[queue]);
+ trans_pcie->txq[queue] = NULL;
+
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", queue);
}
}
vq = hwsim_vqs[HWSIM_VQ_RX];
sg_init_one(sg, skb->head, skb_end_offset(skb));
- err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_KERNEL);
+ err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_ATOMIC);
if (WARN(err, "virtqueue_add_inbuf returned %d\n", err))
nlmsg_free(skb);
else
{
}
-static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+static void *rtl_rate_alloc(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
return rtlpriv;
dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
+
+static void apex_pci_fixup_class(struct pci_dev *pdev)
+{
+ pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
+ PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
# SPDX-License-Identifier: GPL-2.0-only
config PHY_TEGRA_XUSB
tristate "NVIDIA Tegra XUSB pad controller driver"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA && USB_SUPPORT
+ select USB_COMMON
select USB_CONN_GPIO
select USB_PHY
help
ines_write32(port, ts_stat_rx, ts_stat_rx);
ines_write32(port, ts_stat_tx, ts_stat_tx);
- port->rxts_enabled = ts_stat_rx == TS_ENABLE ? true : false;
- port->txts_enabled = ts_stat_tx == TS_ENABLE ? true : false;
+ port->rxts_enabled = ts_stat_rx == TS_ENABLE;
+ port->txts_enabled = ts_stat_tx == TS_ENABLE;
spin_unlock_irqrestore(&port->lock, flags);
wait_queue_head_t ack_wq;
void __iomem *cpu_addr;
- phys_addr_t phys_addr;
+ dma_addr_t dma_addr;
size_t dram_size;
struct rproc_subdev *rpmsg_subdev;
if (offset >= 0 && (offset + len) < scp->sram_size)
return (void __force *)scp->sram_base + offset;
} else {
- offset = da - scp->phys_addr;
+ offset = da - scp->dma_addr;
if (offset >= 0 && (offset + len) < scp->dram_size)
return (void __force *)scp->cpu_addr + offset;
}
/* Reserved SCP code size */
scp->dram_size = MAX_CODE_SIZE;
scp->cpu_addr = dma_alloc_coherent(scp->dev, scp->dram_size,
- &scp->phys_addr, GFP_KERNEL);
+ &scp->dma_addr, GFP_KERNEL);
if (!scp->cpu_addr)
return -ENOMEM;
static void scp_unmap_memory_region(struct mtk_scp *scp)
{
dma_free_coherent(scp->dev, scp->dram_size, scp->cpu_addr,
- scp->phys_addr);
+ scp->dma_addr);
of_reserved_mem_device_release(scp->dev);
}
}
return ret;
-};
+}
static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
size_t pd_count)
dev_pm_domain_detach(devs[i], false);
return ret;
-};
+}
static void q6v5_pds_detach(struct q6v5 *qproc, struct device **pds,
size_t pd_count)
ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name",
1, &qproc->hexagon_mdt_image);
if (ret < 0 && ret != -EINVAL)
- return ret;
+ goto free_rproc;
platform_set_drvdata(pdev, qproc);
qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12);
if (IS_ERR(qproc->sysmon)) {
ret = PTR_ERR(qproc->sysmon);
- goto detach_proxy_pds;
+ goto remove_subdevs;
}
ret = rproc_add(rproc);
if (ret)
- goto detach_proxy_pds;
+ goto remove_sysmon_subdev;
return 0;
-detach_proxy_pds:
+remove_sysmon_subdev:
+ qcom_remove_sysmon_subdev(qproc->sysmon);
+remove_subdevs:
qcom_remove_ipa_notify_subdev(qproc->rproc, &qproc->ipa_notify_subdev);
+ qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev);
+ qcom_remove_smd_subdev(rproc, &qproc->smd_subdev);
+ qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
+detach_proxy_pds:
q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
detach_active_pds:
q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
static int q6v5_remove(struct platform_device *pdev)
{
struct q6v5 *qproc = platform_get_drvdata(pdev);
+ struct rproc *rproc = qproc->rproc;
- rproc_del(qproc->rproc);
+ rproc_del(rproc);
qcom_remove_sysmon_subdev(qproc->sysmon);
- qcom_remove_ipa_notify_subdev(qproc->rproc, &qproc->ipa_notify_subdev);
- qcom_remove_glink_subdev(qproc->rproc, &qproc->glink_subdev);
- qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
- qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
+ qcom_remove_ipa_notify_subdev(rproc, &qproc->ipa_notify_subdev);
+ qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev);
+ qcom_remove_smd_subdev(rproc, &qproc->smd_subdev);
+ qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
- q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
+ q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
- rproc_free(qproc->rproc);
+ rproc_free(rproc);
return 0;
}
*/
#include <linux/remoteproc.h>
+#include <linux/slab.h>
#include "remoteproc_internal.h"
#include <linux/regmap.h>
#include <linux/remoteproc.h>
#include <linux/reset.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include "remoteproc_internal.h"
#include <linux/platform_device.h>
#include <linux/remoteproc.h>
#include <linux/rpmsg/mtk_rpmsg.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include "rpmsg_internal.h"
For scanners, look at SANE (<http://www.sane-project.org/>). For CD
writer software look at Cdrtools
- (<http://cdrecord.berlios.de/private/cdrecord.html>)
+ (<http://cdrtools.sourceforge.net/>)
and for burning a "disk at once": CDRDAO
(<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
hp->flags = input_size; /* structure abuse ... */
hp->pack_id = old_hdr.pack_id;
hp->usr_ptr = NULL;
- if (copy_from_user(cmnd, buf, cmd_size))
+ if (copy_from_user(cmnd, buf, cmd_size)) {
+ sg_remove_request(sfp, srp);
return -EFAULT;
+ }
/*
* SG_DXFER_TO_FROM_DEV is functionally equivalent to SG_DXFER_FROM_DEV,
* but is is possible that the app intended SG_DXFER_TO_DEV, because there
const struct dpaa2_fd *fd,
int nb)
{
- int i;
- struct qbman_eq_desc ed[32];
+ struct qbman_eq_desc *ed;
+ int i, ret;
+
+ ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
+ if (!ed)
+ return -ENOMEM;
d = service_select(d);
- if (!d)
- return -ENODEV;
+ if (!d) {
+ ret = -ENODEV;
+ goto out;
+ }
for (i = 0; i < nb; i++) {
qbman_eq_desc_clear(&ed[i]);
qbman_eq_desc_set_fq(&ed[i], fqid[i]);
}
- return qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
+ ret = qbman_swp_enqueue_multiple_desc(d->swp, &ed[0], fd, nb);
+out:
+ kfree(ed);
+ return ret;
}
EXPORT_SYMBOL(dpaa2_io_service_enqueue_multiple_desc_fq);
if (!s->eqcr.available) {
eqcr_ci = s->eqcr.ci;
p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
- s->eqcr.ci = __raw_readl(p) & full_mask;
+ s->eqcr.ci = *p & full_mask;
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available) {
const uint32_t *cl;
uint32_t eqcr_ci, eqcr_pi, half_mask, full_mask;
int i, num_enqueued = 0;
- uint64_t addr_cena;
half_mask = (s->eqcr.pi_ci_mask>>1);
full_mask = s->eqcr.pi_ci_mask;
/* Flush all the cacheline without load/store in between */
eqcr_pi = s->eqcr.pi;
- addr_cena = (uint64_t)s->addr_cena;
for (i = 0; i < num_enqueued; i++)
eqcr_pi++;
s->eqcr.pi = eqcr_pi & full_mask;
if (!s->eqcr.available) {
eqcr_ci = s->eqcr.ci;
p = s->addr_cena + QBMAN_CENA_SWP_EQCR_CI_MEMBACK;
- s->eqcr.ci = __raw_readl(p) & full_mask;
+ s->eqcr.ci = *p & full_mask;
s->eqcr.available = qm_cyc_diff(s->eqcr.pi_ring_size,
eqcr_ci, s->eqcr.ci);
if (!s->eqcr.available)
bool "i.MX8M SoC family support"
depends on ARCH_MXC || COMPILE_TEST
default ARCH_MXC && ARM64
+ select SOC_BUS
help
If you say yes here you get support for the NXP i.MX8M family
support, it will provide the SoC info like SoC family,
config ZYNQMP_POWER
bool "Enable Xilinx Zynq MPSoC Power Management driver"
- depends on PM && ARCH_ZYNQMP
+ depends on PM && ZYNQMP_FIRMWARE
default y
select MAILBOX
select ZYNQMP_IPI_MBOX
config ZYNQMP_PM_DOMAINS
bool "Enable Zynq MPSoC generic PM domains"
default y
- depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+ depends on PM && ZYNQMP_FIRMWARE
select PM_GENERIC_DOMAINS
help
Say yes to enable device power management through PM domains
}
cfp = kzalloc(sizeof(*cfp), GFP_KERNEL);
- if (!cfp)
+ if (!cfp) {
+ comedi_dev_put(dev);
return -ENOMEM;
+ }
cfp->dev = dev;
int ret;
for (i = 0; i < insn->n; i++) {
+ /* FIXME: lo bit 0 chooses voltage output or current output */
lo = ((data[i] & 0x0f) << 4) | (chan << 1) | 0x01;
hi = (data[i] & 0xff0) >> 4;
if (ret)
return ret;
+ outb(hi, dev->iobase + DT2815_DATA);
+
devpriv->ao_readback[chan] = data[i];
}
return i;
{ PCI_DEVICE(APEX_PCI_VENDOR_ID, APEX_PCI_DEVICE_ID) }, { 0 }
};
-static void apex_pci_fixup_class(struct pci_dev *pdev)
-{
- pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
-}
-DECLARE_PCI_FIXUP_CLASS_HEADER(APEX_PCI_VENDOR_ID, APEX_PCI_DEVICE_ID,
- PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
-
static int apex_pci_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id)
{
}
mutex_lock(&mapping->mutex);
- for (i = 0; strcmp(attrs[i].attr.attr.name, GASKET_ARRAY_END_MARKER);
- i++) {
+ for (i = 0; attrs[i].attr.attr.name != NULL; i++) {
if (mapping->attribute_count == GASKET_SYSFS_MAX_NODES) {
dev_err(device,
"Maximum number of sysfs nodes reached for device\n");
*/
#define GASKET_SYSFS_MAX_NODES 196
-/* End markers for sysfs struct arrays. */
-#define GASKET_ARRAY_END_TOKEN GASKET_RESERVED_ARRAY_END
-#define GASKET_ARRAY_END_MARKER __stringify(GASKET_ARRAY_END_TOKEN)
-
/*
* Terminator struct for a gasket_sysfs_attr array. Must be at the end of
* all gasket_sysfs_attribute arrays.
case VNT_KEY_PAIRWISE:
key_mode |= mode;
key_inx = 4;
- /* Don't save entry for pairwise key for station mode */
- if (priv->op_mode == NL80211_IFTYPE_STATION)
- clear_bit(entry, &priv->key_entry_inuse);
break;
default:
return -EINVAL;
int vnt_set_keys(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
struct ieee80211_vif *vif, struct ieee80211_key_conf *key)
{
- struct ieee80211_bss_conf *conf = &vif->bss_conf;
struct vnt_private *priv = hw->priv;
u8 *mac_addr = NULL;
u8 key_dec_mode = 0;
return -EOPNOTSUPP;
}
- if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
vnt_set_keymode(hw, mac_addr, key, VNT_KEY_PAIRWISE,
key_dec_mode, true);
- } else {
- vnt_set_keymode(hw, mac_addr, key, VNT_KEY_DEFAULTKEY,
+ else
+ vnt_set_keymode(hw, mac_addr, key, VNT_KEY_GROUP_ADDRESS,
key_dec_mode, true);
- vnt_set_keymode(hw, (u8 *)conf->bssid, key,
- VNT_KEY_GROUP_ADDRESS, key_dec_mode, true);
- }
-
return 0;
}
priv->op_mode = vif->type;
- vnt_set_bss_mode(priv);
-
/* LED blink on TX */
vnt_mac_set_led(priv, LEDSTS_STS, LEDSTS_INTER);
priv->basic_rates = conf->basic_rates;
vnt_update_top_rates(priv);
- vnt_set_bss_mode(priv);
dev_dbg(&priv->usb->dev, "basic rates %x\n", conf->basic_rates);
}
priv->short_slot_time = false;
vnt_set_short_slot_time(priv);
- vnt_update_ifs(priv);
vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
vnt_update_pre_ed_threshold(priv, false);
}
+ if (changed & (BSS_CHANGED_BASIC_RATES | BSS_CHANGED_ERP_PREAMBLE |
+ BSS_CHANGED_ERP_SLOT))
+ vnt_set_bss_mode(priv);
+
if (changed & BSS_CHANGED_TXPOWER)
vnt_rf_setpower(priv, priv->current_rate,
conf->chandef.chan->hw_value);
vnt_mac_reg_bits_on(priv, MAC_REG_TFTCTL,
TFTCTL_TSFCNTREN);
- vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
- conf->sync_tsf, priv->current_tsf);
-
vnt_mac_set_beacon_interval(priv, conf->beacon_int);
vnt_reset_next_tbtt(priv, conf->beacon_int);
+
+ vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
+ conf->sync_tsf, priv->current_tsf);
+
+ vnt_update_next_tbtt(priv,
+ conf->sync_tsf, conf->beacon_int);
} else {
vnt_clear_current_tsf(priv);
{
struct vnt_private *priv = hw->priv;
u8 rx_mode = 0;
- int rc;
*total_flags &= FIF_ALLMULTI | FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC;
- rc = vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
- MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
-
- if (!rc)
- rx_mode = RCR_MULTICAST | RCR_BROADCAST;
+ vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
+ MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
dev_dbg(&priv->usb->dev, "rx mode in = %x\n", rx_mode);
case SET_KEY:
return vnt_set_keys(hw, sta, vif, key);
case DISABLE_KEY:
- if (test_bit(key->hw_key_idx, &priv->key_entry_inuse))
+ if (test_bit(key->hw_key_idx, &priv->key_entry_inuse)) {
clear_bit(key->hw_key_idx, &priv->key_entry_inuse);
+
+ vnt_mac_disable_keyentry(priv, key->hw_key_idx);
+ }
+
default:
break;
}
priv->wake_up_count =
priv->hw->conf.listen_interval;
- --priv->wake_up_count;
+ if (priv->wake_up_count)
+ --priv->wake_up_count;
/* Turn on wake up to listen next beacon */
if (priv->wake_up_count == 1)
vtermnos[index] = vtermno;
cons_ops[index] = ops;
- /* reserve all indices up to and including this index */
- if (last_hvc < index)
- last_hvc = index;
-
/* check if we need to re-register the kernel console */
hvc_check_console(index);
cons_ops[i] == hp->ops)
break;
- /* no matching slot, just use a counter */
- if (i >= MAX_NR_HVC_CONSOLES)
- i = ++last_hvc;
+ if (i >= MAX_NR_HVC_CONSOLES) {
+
+ /* find 'empty' slot for console */
+ for (i = 0; i < MAX_NR_HVC_CONSOLES && vtermnos[i] != -1; i++) {
+ }
+
+ /* no matching slot, just use a counter */
+ if (i == MAX_NR_HVC_CONSOLES)
+ i = ++last_hvc + MAX_NR_HVC_CONSOLES;
+ }
hp->index = i;
- cons_ops[i] = ops;
- vtermnos[i] = vtermno;
+ if (i < MAX_NR_HVC_CONSOLES) {
+ cons_ops[i] = ops;
+ vtermnos[i] = vtermno;
+ }
list_add_tail(&(hp->next), &hvc_structs);
mutex_unlock(&hvc_structs_mutex);
tty_port_init(&info->port);
info->port.ops = &rocket_port_ops;
info->flags &= ~ROCKET_MODE_MASK;
- switch (pc104[board][line]) {
- case 422:
- info->flags |= ROCKET_MODE_RS422;
- break;
- case 485:
- info->flags |= ROCKET_MODE_RS485;
- break;
- case 232:
- default:
+ if (board < ARRAY_SIZE(pc104) && line < ARRAY_SIZE(pc104_1))
+ switch (pc104[board][line]) {
+ case 422:
+ info->flags |= ROCKET_MODE_RS422;
+ break;
+ case 485:
+ info->flags |= ROCKET_MODE_RS485;
+ break;
+ case 232:
+ default:
+ info->flags |= ROCKET_MODE_RS232;
+ break;
+ }
+ else
info->flags |= ROCKET_MODE_RS232;
- break;
- }
info->intmask = RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR;
if (sInitChan(ctlp, &info->channel, aiop, chan) == 0) {
if (IS_ERR(clk) && pdev->dev.of_node)
clk = of_clk_get(pdev->dev.of_node, 0);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
+ clk_put(clk);
return -ENODEV;
+ }
port->iotype = UPIO_MEM;
port->irq = res_irq->start;
return PTR_ERR(owl_port->clk);
}
+ ret = clk_prepare_enable(owl_port->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "could not enable clk\n");
+ return ret;
+ }
+
owl_port->port.dev = &pdev->dev;
owl_port->port.line = pdev->id;
owl_port->port.type = PORT_OWL;
uart_remove_one_port(&owl_uart_driver, &owl_port->port);
owl_uart_ports[pdev->id] = NULL;
+ clk_disable_unprepare(owl_port->clk);
return 0;
}
tty_insert_flip_char(tport, c, TTY_NORMAL);
} else {
for (i = 0; i < count; i++) {
- char c = serial_port_in(port, SCxRDR);
-
- status = serial_port_in(port, SCxSR);
+ char c;
+
+ if (port->type == PORT_SCIF ||
+ port->type == PORT_HSCIF) {
+ status = serial_port_in(port, SCxSR);
+ c = serial_port_in(port, SCxRDR);
+ } else {
+ c = serial_port_in(port, SCxRDR);
+ status = serial_port_in(port, SCxSR);
+ }
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
continue;
sunserial_console_match(&sunhv_console, op->dev.of_node,
&sunhv_reg, port->line, false);
+ /* We need to initialize lock even for non-registered console */
+ spin_lock_init(&port->lock);
+
err = uart_add_one_port(&sunhv_reg, port);
if (err)
goto out_unregister_driver;
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
+#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS 16
#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
#define CDNS_UART_REGISTER_SPACE 0x1000
#define TX_TIMEOUT 500000
/* Rx Trigger level */
static int rx_trigger_level = 56;
-static int uartps_major;
module_param(rx_trigger_level, uint, 0444);
MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
* @pclk: APB clock
* @cdns_uart_driver: Pointer to UART driver
* @baud: Current baud rate
- * @id: Port ID
* @clk_rate_change_nb: Notifier block for clock changes
* @quirks: Flags for RXBS support.
*/
struct clk *pclk;
struct uart_driver *cdns_uart_driver;
unsigned int baud;
- int id;
struct notifier_block clk_rate_change_nb;
u32 quirks;
bool cts_override;
#endif
};
+static struct uart_driver cdns_uart_uart_driver;
+
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* cdns_uart_console_putchar - write the character to the FIFO buffer
return uart_set_options(port, co, baud, parity, bits, flow);
}
+
+static struct console cdns_uart_console = {
+ .name = CDNS_UART_TTY_NAME,
+ .write = cdns_uart_console_write,
+ .device = uart_console_device,
+ .setup = cdns_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+ .data = &cdns_uart_uart_driver,
+};
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
#ifdef CONFIG_PM_SLEEP
};
MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
-/*
- * Maximum number of instances without alias IDs but if there is alias
- * which target "< MAX_UART_INSTANCES" range this ID can't be used.
- */
-#define MAX_UART_INSTANCES 32
-
-/* Stores static aliases list */
-static DECLARE_BITMAP(alias_bitmap, MAX_UART_INSTANCES);
-static int alias_bitmap_initialized;
-
-/* Stores actual bitmap of allocated IDs with alias IDs together */
-static DECLARE_BITMAP(bitmap, MAX_UART_INSTANCES);
-/* Protect bitmap operations to have unique IDs */
-static DEFINE_MUTEX(bitmap_lock);
-
-static int cdns_get_id(struct platform_device *pdev)
-{
- int id, ret;
-
- mutex_lock(&bitmap_lock);
-
- /* Alias list is stable that's why get alias bitmap only once */
- if (!alias_bitmap_initialized) {
- ret = of_alias_get_alias_list(cdns_uart_of_match, "serial",
- alias_bitmap, MAX_UART_INSTANCES);
- if (ret && ret != -EOVERFLOW) {
- mutex_unlock(&bitmap_lock);
- return ret;
- }
-
- alias_bitmap_initialized++;
- }
-
- /* Make sure that alias ID is not taken by instance without alias */
- bitmap_or(bitmap, bitmap, alias_bitmap, MAX_UART_INSTANCES);
-
- dev_dbg(&pdev->dev, "Alias bitmap: %*pb\n",
- MAX_UART_INSTANCES, bitmap);
-
- /* Look for a serialN alias */
- id = of_alias_get_id(pdev->dev.of_node, "serial");
- if (id < 0) {
- dev_warn(&pdev->dev,
- "No serial alias passed. Using the first free id\n");
-
- /*
- * Start with id 0 and check if there is no serial0 alias
- * which points to device which is compatible with this driver.
- * If alias exists then try next free position.
- */
- id = 0;
-
- for (;;) {
- dev_info(&pdev->dev, "Checking id %d\n", id);
- id = find_next_zero_bit(bitmap, MAX_UART_INSTANCES, id);
-
- /* No free empty instance */
- if (id == MAX_UART_INSTANCES) {
- dev_err(&pdev->dev, "No free ID\n");
- mutex_unlock(&bitmap_lock);
- return -EINVAL;
- }
-
- dev_dbg(&pdev->dev, "The empty id is %d\n", id);
- /* Check if ID is empty */
- if (!test_and_set_bit(id, bitmap)) {
- /* Break the loop if bit is taken */
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation passed\n",
- id);
- break;
- }
- dev_dbg(&pdev->dev,
- "Selected ID %d allocation failed\n", id);
- /* if taking bit fails then try next one */
- id++;
- }
- }
-
- mutex_unlock(&bitmap_lock);
-
- return id;
-}
+/* Temporary variable for storing number of instances */
+static int instances;
/**
* cdns_uart_probe - Platform driver probe
*/
static int cdns_uart_probe(struct platform_device *pdev)
{
- int rc, irq;
+ int rc, id, irq;
struct uart_port *port;
struct resource *res;
struct cdns_uart *cdns_uart_data;
const struct of_device_id *match;
- struct uart_driver *cdns_uart_uart_driver;
- char *driver_name;
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- struct console *cdns_uart_console;
-#endif
cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
GFP_KERNEL);
if (!port)
return -ENOMEM;
- cdns_uart_uart_driver = devm_kzalloc(&pdev->dev,
- sizeof(*cdns_uart_uart_driver),
- GFP_KERNEL);
- if (!cdns_uart_uart_driver)
- return -ENOMEM;
-
- cdns_uart_data->id = cdns_get_id(pdev);
- if (cdns_uart_data->id < 0)
- return cdns_uart_data->id;
+ /* Look for a serialN alias */
+ id = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (id < 0)
+ id = 0;
- /* There is a need to use unique driver name */
- driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
- CDNS_UART_NAME, cdns_uart_data->id);
- if (!driver_name) {
- rc = -ENOMEM;
- goto err_out_id;
+ if (id >= CDNS_UART_NR_PORTS) {
+ dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+ return -ENODEV;
}
- cdns_uart_uart_driver->owner = THIS_MODULE;
- cdns_uart_uart_driver->driver_name = driver_name;
- cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME;
- cdns_uart_uart_driver->major = uartps_major;
- cdns_uart_uart_driver->minor = cdns_uart_data->id;
- cdns_uart_uart_driver->nr = 1;
-
+ if (!cdns_uart_uart_driver.state) {
+ cdns_uart_uart_driver.owner = THIS_MODULE;
+ cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
+ cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
+ cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
+ cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
+ cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
- GFP_KERNEL);
- if (!cdns_uart_console) {
- rc = -ENOMEM;
- goto err_out_id;
- }
-
- strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
- sizeof(cdns_uart_console->name));
- cdns_uart_console->index = cdns_uart_data->id;
- cdns_uart_console->write = cdns_uart_console_write;
- cdns_uart_console->device = uart_console_device;
- cdns_uart_console->setup = cdns_uart_console_setup;
- cdns_uart_console->flags = CON_PRINTBUFFER;
- cdns_uart_console->data = cdns_uart_uart_driver;
- cdns_uart_uart_driver->cons = cdns_uart_console;
+ cdns_uart_uart_driver.cons = &cdns_uart_console;
#endif
- rc = uart_register_driver(cdns_uart_uart_driver);
- if (rc < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
- goto err_out_id;
+ rc = uart_register_driver(&cdns_uart_uart_driver);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ return rc;
+ }
}
- cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
-
- /*
- * Setting up proper name_base needs to be done after uart
- * registration because tty_driver structure is not filled.
- * name_base is 0 by default.
- */
- cdns_uart_uart_driver->tty_driver->name_base = cdns_uart_data->id;
+ cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
if (match && match->data) {
port->ops = &cdns_uart_ops;
port->fifosize = CDNS_UART_FIFO_SIZE;
port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
+ port->line = id;
/*
* Register the port.
console_port = port;
#endif
- rc = uart_add_one_port(cdns_uart_uart_driver, port);
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(cdns_uart_uart_driver->cons->flags & CON_ENABLED))
+ !(cdns_uart_uart_driver.cons->flags & CON_ENABLED))
console_port = NULL;
#endif
- uartps_major = cdns_uart_uart_driver->tty_driver->major;
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
"cts-override");
+
+ instances++;
+
return 0;
err_out_pm_disable:
err_out_clk_dis_pclk:
clk_disable_unprepare(cdns_uart_data->pclk);
err_out_unregister_driver:
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-err_out_id:
- mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
+ if (!instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
#endif
rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
port->mapbase = 0;
- mutex_lock(&bitmap_lock);
- if (cdns_uart_data->id < MAX_UART_INSTANCES)
- clear_bit(cdns_uart_data->id, bitmap);
- mutex_unlock(&bitmap_lock);
clk_disable_unprepare(cdns_uart_data->uartclk);
clk_disable_unprepare(cdns_uart_data->pclk);
pm_runtime_disable(&pdev->dev);
console_port = NULL;
#endif
- /* If this is last instance major number should be initialized */
- mutex_lock(&bitmap_lock);
- if (bitmap_empty(bitmap, MAX_UART_INSTANCES))
- uartps_major = 0;
- mutex_unlock(&bitmap_lock);
-
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+ if (!--instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
return 1;
return sysrq_enabled;
}
+EXPORT_SYMBOL_GPL(sysrq_mask);
/*
* A value of 1 means 'all', other nonzero values are an op mask:
return 0;
}
+EXPORT_SYMBOL_GPL(sysrq_toggle_support);
static int __sysrq_swap_key_ops(int key, struct sysrq_key_op *insert_op_p,
struct sysrq_key_op *remove_op_p)
#include <linux/errno.h>
#include <linux/kd.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/console.h>
/* allocate everything in one go */
memsize = cols * rows * sizeof(char32_t);
memsize += rows * sizeof(char32_t *);
- p = kmalloc(memsize, GFP_KERNEL);
+ p = vmalloc(memsize);
if (!p)
return NULL;
static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr)
{
- kfree(vc->vc_uni_screen);
+ vfree(vc->vc_uni_screen);
vc->vc_uni_screen = new_uniscr;
}
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- if (new_screen_size > (4 << 20))
+ if (new_screen_size > KMALLOC_MAX_SIZE)
return -EINVAL;
newscreen = kzalloc(new_screen_size, GFP_USER);
if (!newscreen)
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval && retval != -EPERM)
+ if (retval && retval != -EPERM && retval != -ENODEV)
dev_err(&acm->control->dev,
"%s - usb_submit_urb failed: %d\n", __func__, retval);
+ else
+ dev_vdbg(&acm->control->dev,
+ "control resubmission terminated %d\n", retval);
}
static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
dev_err(&acm->data->dev,
"urb %d failed submission with %d\n",
index, res);
+ } else {
+ dev_vdbg(&acm->data->dev, "intended failure %d\n", res);
}
set_bit(index, &acm->read_urbs_free);
return res;
int status = urb->status;
bool stopped = false;
bool stalled = false;
+ bool cooldown = false;
dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
rb->index, urb->actual_length, status);
__func__, status);
stopped = true;
break;
+ case -EOVERFLOW:
+ case -EPROTO:
+ dev_dbg(&acm->data->dev,
+ "%s - cooling babbling device\n", __func__);
+ usb_mark_last_busy(acm->dev);
+ set_bit(rb->index, &acm->urbs_in_error_delay);
+ cooldown = true;
+ break;
default:
dev_dbg(&acm->data->dev,
"%s - nonzero urb status received: %d\n",
*/
smp_mb__after_atomic();
- if (stopped || stalled) {
+ if (stopped || stalled || cooldown) {
if (stalled)
schedule_work(&acm->work);
+ else if (cooldown)
+ schedule_delayed_work(&acm->dwork, HZ / 2);
return;
}
struct acm *acm = container_of(work, struct acm, work);
if (test_bit(EVENT_RX_STALL, &acm->flags)) {
- if (!(usb_autopm_get_interface(acm->data))) {
+ smp_mb(); /* against acm_suspend() */
+ if (!acm->susp_count) {
for (i = 0; i < acm->rx_buflimit; i++)
usb_kill_urb(acm->read_urbs[i]);
usb_clear_halt(acm->dev, acm->in);
acm_submit_read_urbs(acm, GFP_KERNEL);
- usb_autopm_put_interface(acm->data);
+ clear_bit(EVENT_RX_STALL, &acm->flags);
}
- clear_bit(EVENT_RX_STALL, &acm->flags);
+ }
+
+ if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
+ for (i = 0; i < ACM_NR; i++)
+ if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
+ acm_submit_read_urb(acm, i, GFP_NOIO);
}
if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
INIT_WORK(&acm->work, acm_softint);
+ INIT_DELAYED_WORK(&acm->dwork, acm_softint);
init_waitqueue_head(&acm->wioctl);
spin_lock_init(&acm->write_lock);
spin_lock_init(&acm->read_lock);
acm_kill_urbs(acm);
cancel_work_sync(&acm->work);
+ cancel_delayed_work_sync(&acm->dwork);
tty_unregister_device(acm_tty_driver, acm->minor);
acm_kill_urbs(acm);
cancel_work_sync(&acm->work);
+ cancel_delayed_work_sync(&acm->dwork);
+ acm->urbs_in_error_delay = 0;
return 0;
}
# define EVENT_TTY_WAKEUP 0
# define EVENT_RX_STALL 1
# define ACM_THROTTLED 2
+# define ACM_ERROR_DELAY 3
+ unsigned long urbs_in_error_delay; /* these need to be restarted after a delay */
struct usb_cdc_line_coding line; /* bits, stop, parity */
- struct work_struct work; /* work queue entry for line discipline waking up */
+ struct work_struct work; /* work queue entry for various purposes*/
+ struct delayed_work dwork; /* for cool downs needed in error recovery */
unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
unsigned int ctrlout; /* output control lines (DTR, RTS) */
struct async_icount iocount; /* counters for control line changes */
#ifdef CONFIG_PM
udev->reset_resume = 1;
#endif
+ /* Don't set the change_bits when the device
+ * was powered off.
+ */
+ if (test_bit(port1, hub->power_bits))
+ set_bit(port1, hub->change_bits);
} else {
/* The power session is gone; tell hub_wq */
{
int old_scheme_first_port =
port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
- int quick_enumeration = (udev->speed == USB_SPEED_HIGH);
if (udev->speed >= USB_SPEED_SUPER)
return false;
- return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first
- || quick_enumeration);
+ return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
}
/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
if (portchange & USB_PORT_STAT_C_ENABLE)
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
+
+ /*
+ * Whatever made this reset-resume necessary may have
+ * turned on the port1 bit in hub->change_bits. But after
+ * a successful reset-resume we want the bit to be clear;
+ * if it was on it would indicate that something happened
+ * following the reset-resume.
+ */
+ clear_bit(port1, hub->change_bits);
}
return status;
int i, retval;
spin_lock_irqsave(&io->lock, flags);
- if (io->status) {
+ if (io->status || io->count == 0) {
spin_unlock_irqrestore(&io->lock, flags);
return;
}
/* shut everything down */
io->status = -ECONNRESET;
+ io->count++; /* Keep the request alive until we're done */
spin_unlock_irqrestore(&io->lock, flags);
for (i = io->entries - 1; i >= 0; --i) {
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__func__, retval);
}
+
+ spin_lock_irqsave(&io->lock, flags);
+ io->count--;
+ if (!io->count)
+ complete(&io->complete);
+ spin_unlock_irqrestore(&io->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_sg_cancel);
/* Corsair K70 LUX */
{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
+ /* Corsair K70 RGB RAPDIFIRE */
+ { USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
+ USB_QUIRK_DELAY_CTRL_MSG },
+
/* MIDI keyboard WORLDE MINI */
{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Global TX Fifo Size Register */
#define DWC31_GTXFIFOSIZ_TXFRAMNUM BIT(15) /* DWC_usb31 only */
-#define DWC31_GTXFIFOSIZ_TXFDEF(n) ((n) & 0x7fff) /* DWC_usb31 only */
-#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
+#define DWC31_GTXFIFOSIZ_TXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */
+#define DWC3_GTXFIFOSIZ_TXFDEP(n) ((n) & 0xffff)
#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n) ((n) & 0xffff)
+
/* Global Event Size Registers */
#define DWC3_GEVNTSIZ_INTMASK BIT(31)
#define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff)
u32 reg;
u8 link_state;
- u8 speed;
/*
* According to the Databook Remote wakeup request should
*/
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
- speed = reg & DWC3_DSTS_CONNECTSPD;
- if ((speed == DWC3_DSTS_SUPERSPEED) ||
- (speed == DWC3_DSTS_SUPERSPEED_PLUS))
- return 0;
-
link_state = DWC3_DSTS_USBLNKST(reg);
switch (link_state) {
+ case DWC3_LINK_STATE_RESET:
case DWC3_LINK_STATE_RX_DET: /* in HS, means Early Suspend */
case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */
+ case DWC3_LINK_STATE_RESUME:
break;
default:
return -EINVAL;
{
struct dwc3 *dwc = dep->dwc;
int mdwidth;
- int kbytes;
int size;
mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1));
if (dwc3_is_usb31(dwc))
- size = DWC31_GTXFIFOSIZ_TXFDEF(size);
+ size = DWC31_GTXFIFOSIZ_TXFDEP(size);
else
- size = DWC3_GTXFIFOSIZ_TXFDEF(size);
+ size = DWC3_GTXFIFOSIZ_TXFDEP(size);
/* FIFO Depth is in MDWDITH bytes. Multiply */
size *= mdwidth;
- kbytes = size / 1024;
- if (kbytes == 0)
- kbytes = 1;
-
/*
- * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for
- * internal overhead. We don't really know how these are used,
- * but documentation say it exists.
+ * To meet performance requirement, a minimum TxFIFO size of 3x
+ * MaxPacketSize is recommended for endpoints that support burst and a
+ * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't
+ * support burst. Use those numbers and we can calculate the max packet
+ * limit as below.
*/
- size -= mdwidth * (kbytes + 1);
- size /= kbytes;
+ if (dwc->maximum_speed >= USB_SPEED_SUPER)
+ size /= 3;
+ else
+ size /= 2;
usb_ep_set_maxpacket_limit(&dep->endpoint, size);
static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
{
struct dwc3 *dwc = dep->dwc;
+ int mdwidth;
+ int size;
+
+ mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
- usb_ep_set_maxpacket_limit(&dep->endpoint, 1024);
+ /* MDWIDTH is represented in bits, convert to bytes */
+ mdwidth /= 8;
+
+ /* All OUT endpoints share a single RxFIFO space */
+ size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0));
+ if (dwc3_is_usb31(dwc))
+ size = DWC31_GRXFIFOSIZ_RXFDEP(size);
+ else
+ size = DWC3_GRXFIFOSIZ_RXFDEP(size);
+
+ /* FIFO depth is in MDWDITH bytes */
+ size *= mdwidth;
+
+ /*
+ * To meet performance requirement, a minimum recommended RxFIFO size
+ * is defined as follow:
+ * RxFIFO size >= (3 x MaxPacketSize) +
+ * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin)
+ *
+ * Then calculate the max packet limit as below.
+ */
+ size -= (3 * 8) + 16;
+ if (size < 0)
+ size = 0;
+ else
+ size /= 3;
+
+ usb_ep_set_maxpacket_limit(&dep->endpoint, size);
dep->endpoint.max_streams = 15;
dep->endpoint.ops = &dwc3_gadget_ep_ops;
list_add_tail(&dep->endpoint.ep_list,
static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
{
- /*
- * For OUT direction, host may send less than the setup
- * length. Return true for all OUT requests.
- */
- if (!req->direction)
- return true;
-
- return req->request.actual == req->request.length;
+ return req->num_pending_sgs == 0;
}
static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
req->request.actual = req->request.length - req->remaining;
- if (!dwc3_gadget_ep_request_completed(req) ||
- req->num_pending_sgs) {
+ if (!dwc3_gadget_ep_request_completed(req)) {
__dwc3_gadget_kick_transfer(dep);
goto out;
}
case COMP_USB_TRANSACTION_ERROR:
case COMP_STALL_ERROR:
default:
- if (ep_id == XDBC_EPID_OUT)
+ if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL)
xdbc.flags |= XDBC_FLAGS_OUT_STALL;
- if (ep_id == XDBC_EPID_IN)
+ if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL)
xdbc.flags |= XDBC_FLAGS_IN_STALL;
xdbc_trace("endpoint %d stalled\n", ep_id);
break;
}
- if (ep_id == XDBC_EPID_IN) {
+ if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL) {
xdbc.flags &= ~XDBC_FLAGS_IN_PROCESS;
xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true);
- } else if (ep_id == XDBC_EPID_OUT) {
+ } else if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL) {
xdbc.flags &= ~XDBC_FLAGS_OUT_PROCESS;
} else {
xdbc_trace("invalid endpoint id %d\n", ep_id);
u32 cycle_state;
};
-#define XDBC_EPID_OUT 2
-#define XDBC_EPID_IN 3
+/*
+ * These are the "Endpoint ID" (also known as "Context Index") values for the
+ * OUT Transfer Ring and the IN Transfer Ring of a Debug Capability Context data
+ * structure.
+ * According to the "eXtensible Host Controller Interface for Universal Serial
+ * Bus (xHCI)" specification, section "7.6.3.2 Endpoint Contexts and Transfer
+ * Rings", these should be 0 and 1, and those are the values AMD machines give
+ * you; but Intel machines seem to use the formula from section "4.5.1 Device
+ * Context Index", which is supposed to be used for the Device Context only.
+ * Luckily the values from Intel don't overlap with those from AMD, so we can
+ * just test for both.
+ */
+#define XDBC_EPID_OUT 0
+#define XDBC_EPID_IN 1
+#define XDBC_EPID_OUT_INTEL 2
+#define XDBC_EPID_IN_INTEL 3
struct xdbc_state {
u16 vendor;
ffs->state = FFS_READ_DESCRIPTORS;
ffs->setup_state = FFS_NO_SETUP;
ffs->flags = 0;
+
+ ffs->ms_os_descs_ext_prop_count = 0;
+ ffs->ms_os_descs_ext_prop_name_len = 0;
+ ffs->ms_os_descs_ext_prop_data_len = 0;
}
static struct usb_raw_event *raw_event_queue_fetch(
struct raw_event_queue *queue)
{
+ int ret;
unsigned long flags;
struct usb_raw_event *event;
* there's at least one event queued by decrementing the semaphore,
* and then take the lock to protect queue struct fields.
*/
- if (down_interruptible(&queue->sema))
- return NULL;
+ ret = down_interruptible(&queue->sema);
+ if (ret)
+ return ERR_PTR(ret);
spin_lock_irqsave(&queue->lock, flags);
- if (WARN_ON(!queue->size))
- return NULL;
+ /*
+ * queue->size must have the same value as queue->sema counter (before
+ * the down_interruptible() call above), so this check is a fail-safe.
+ */
+ if (WARN_ON(!queue->size)) {
+ spin_unlock_irqrestore(&queue->lock, flags);
+ return ERR_PTR(-ENODEV);
+ }
event = queue->events[0];
queue->size--;
memmove(&queue->events[0], &queue->events[1],
char *udc_device_name;
unsigned long flags;
- ret = copy_from_user(&arg, (void __user *)value, sizeof(arg));
- if (ret)
- return ret;
+ if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+ return -EFAULT;
switch (arg.speed) {
case USB_SPEED_UNKNOWN:
static int raw_ioctl_event_fetch(struct raw_dev *dev, unsigned long value)
{
- int ret = 0;
struct usb_raw_event arg;
unsigned long flags;
struct usb_raw_event *event;
uint32_t length;
- ret = copy_from_user(&arg, (void __user *)value, sizeof(arg));
- if (ret)
- return ret;
+ if (copy_from_user(&arg, (void __user *)value, sizeof(arg)))
+ return -EFAULT;
spin_lock_irqsave(&dev->lock, flags);
if (dev->state != STATE_DEV_RUNNING) {
spin_unlock_irqrestore(&dev->lock, flags);
event = raw_event_queue_fetch(&dev->queue);
- if (!event) {
+ if (PTR_ERR(event) == -EINTR) {
dev_dbg(&dev->gadget->dev, "event fetching interrupted\n");
return -EINTR;
}
+ if (IS_ERR(event)) {
+ dev_err(&dev->gadget->dev, "failed to fetch event\n");
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->state = STATE_DEV_FAILED;
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return -ENODEV;
+ }
length = min(arg.length, event->length);
- ret = copy_to_user((void __user *)value, event,
- sizeof(*event) + length);
- return ret;
+ if (copy_to_user((void __user *)value, event, sizeof(*event) + length))
+ return -EFAULT;
+
+ return 0;
}
static void *raw_alloc_io_data(struct usb_raw_ep_io *io, void __user *ptr,
bool get_from_user)
{
- int ret;
void *data;
- ret = copy_from_user(io, ptr, sizeof(*io));
- if (ret)
- return ERR_PTR(ret);
+ if (copy_from_user(io, ptr, sizeof(*io)))
+ return ERR_PTR(-EFAULT);
if (io->ep >= USB_RAW_MAX_ENDPOINTS)
return ERR_PTR(-EINVAL);
if (!usb_raw_io_flags_valid(io->flags))
if (IS_ERR(data))
return PTR_ERR(data);
ret = raw_process_ep0_io(dev, &io, data, false);
- if (ret < 0) {
- kfree(data);
- return ret;
- }
+ if (ret)
+ goto free;
+
length = min(io.length, (unsigned int)ret);
- ret = copy_to_user((void __user *)(value + sizeof(io)), data, length);
+ if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+ ret = -EFAULT;
+free:
kfree(data);
return ret;
}
if (IS_ERR(data))
return PTR_ERR(data);
ret = raw_process_ep_io(dev, &io, data, false);
- if (ret < 0) {
- kfree(data);
- return ret;
- }
+ if (ret)
+ goto free;
+
length = min(io.length, (unsigned int)ret);
- ret = copy_to_user((void __user *)(value + sizeof(io)), data, length);
+ if (copy_to_user((void __user *)(value + sizeof(io)), data, length))
+ ret = -EFAULT;
+free:
kfree(data);
return ret;
}
usba_start(udc);
} else {
udc->suspended = false;
- usba_stop(udc);
-
if (udc->driver->disconnect)
udc->driver->disconnect(&udc->gadget);
+
+ usba_stop(udc);
}
udc->vbus_prev = vbus;
}
{
struct bdc *bdc = ep->bdc;
- if (req == NULL || &req->queue == NULL || &req->usb_req == NULL)
+ if (req == NULL)
return;
dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status);
}
if ((temp & PORT_RC))
reset_change = true;
+ if (temp & PORT_OC)
+ status = 1;
}
if (!status && !reset_change) {
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
port_index);
goto retry;
}
+ /* bail out if port detected a over-current condition */
+ if (t1 & PORT_OC) {
+ bus_state->bus_suspended = 0;
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");
+ return -EBUSY;
+ }
/* suspend ports in U0, or bail out for new connect changes */
if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
if ((t1 & PORT_CSC) && wake_enabled) {
stream_id);
return;
}
+ /*
+ * A cancelled TD can complete with a stall if HW cached the trb.
+ * In this case driver can't find cur_td, but if the ring is empty we
+ * can move the dequeue pointer to the current enqueue position.
+ */
+ if (!cur_td) {
+ if (list_empty(&ep_ring->td_list)) {
+ state->new_deq_seg = ep_ring->enq_seg;
+ state->new_deq_ptr = ep_ring->enqueue;
+ state->new_cycle_state = ep_ring->cycle_state;
+ goto done;
+ } else {
+ xhci_warn(xhci, "Can't find new dequeue state, missing cur_td\n");
+ return;
+ }
+ }
+
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
state->new_deq_seg = new_seg;
state->new_deq_ptr = new_deq;
+done:
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
if (reset_type == EP_HARD_RESET) {
ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
- xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
- xhci_clear_hub_tt_buffer(xhci, td, ep);
+ xhci_cleanup_stalled_ring(xhci, slot_id, ep_index, stream_id,
+ td);
}
xhci_ring_cmd_db(xhci);
}
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
- /* Issue a reset endpoint command to clear the host side
- * halt, followed by a set dequeue command to move the
- * dequeue pointer past the TD.
- * The class driver clears the device side halt later.
+ /*
+ * xhci internal endpoint state will go to a "halt" state for
+ * any stall, including default control pipe protocol stall.
+ * To clear the host side halt we need to issue a reset endpoint
+ * command, followed by a set dequeue command to move past the
+ * TD.
+ * Class drivers clear the device side halt from a functional
+ * stall later. Hub TT buffer should only be cleared for FS/LS
+ * devices behind HS hubs for functional stalls.
*/
+ if ((ep_index != 0) || (trb_comp_code != COMP_STALL_ERROR))
+ xhci_clear_hub_tt_buffer(xhci, td, ep);
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, EP_HARD_RESET);
} else {
xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
}
+ if (trb_comp_code == COMP_STALL_ERROR ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ xhci_cleanup_halted_endpoint(xhci, slot_id,
+ ep_index,
+ ep_ring->stream_id,
+ NULL,
+ EP_HARD_RESET);
+ }
goto cleanup;
}
added_ctxs, added_ctxs);
}
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td)
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td)
{
struct xhci_dequeue_state deq_state;
- struct usb_device *udev = td->urb->dev;
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Cleaning up stalled endpoint ring");
/* We need to move the HW's dequeue pointer past this TD,
* or it will attempt to resend it on the next doorbell ring.
*/
- xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, stream_id, td, &deq_state);
+ xhci_find_new_dequeue_state(xhci, slot_id, ep_index, stream_id, td,
+ &deq_state);
if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
return;
if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Queueing new dequeue state");
- xhci_queue_new_dequeue_state(xhci, udev->slot_id,
+ xhci_queue_new_dequeue_state(xhci, slot_id,
ep_index, &deq_state);
} else {
/* Better hope no one uses the input context between now and the
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Setting up input context for "
"configure endpoint command");
- xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
+ xhci_setup_input_ctx_for_quirk(xhci, slot_id,
ep_index, &deq_state);
}
}
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
- unsigned int stream_id, struct xhci_td *td);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+ unsigned int ep_index, unsigned int stream_id,
+ struct xhci_td *td);
void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
void xhci_handle_command_timeout(struct work_struct *work);
/* High level: Gfx (indexed) register access */
#ifdef CONFIG_USB_SISUSBVGA_CON
-int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data)
+int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data)
{
return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
}
-int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data)
+int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 *data)
{
return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data);
}
#endif
-int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 data)
{
int ret;
return ret;
}
-int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 *data)
{
int ret;
return ret;
}
-int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx,
+int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port, u8 idx,
u8 myand, u8 myor)
{
int ret;
}
static int sisusb_setidxregmask(struct sisusb_usb_data *sisusb,
- int port, u8 idx, u8 data, u8 mask)
+ u32 port, u8 idx, u8 data, u8 mask)
{
int ret;
u8 tmp;
return ret;
}
-int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 myor)
{
return sisusb_setidxregandor(sisusb, port, index, 0xff, myor);
}
-int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand)
{
return sisusb_setidxregandor(sisusb, port, idx, myand, 0x00);
static int sisusb_handle_command(struct sisusb_usb_data *sisusb,
struct sisusb_command *y, unsigned long arg)
{
- int retval, port, length;
- u32 address;
+ int retval, length;
+ u32 port, address;
/* All our commands require the device
* to be initialized.
int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo);
-extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data);
-extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 * data);
-extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setreg(struct sisusb_usb_data *sisusb, u32 port, u8 data);
+extern int sisusb_getreg(struct sisusb_usb_data *sisusb, u32 port, u8 * data);
+extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 data);
-extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 * data);
-extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand, u8 myor);
-extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, u32 port,
u8 index, u8 myor);
-extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port,
+extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, u32 port,
u8 idx, u8 myand);
void sisusb_delete(struct kref *kref);
static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
int status);
+/*
+ * This driver needs its own workqueue, as we need to control memory allocation.
+ *
+ * In the course of error handling and power management uas_wait_for_pending_cmnds()
+ * needs to flush pending work items. In these contexts we cannot allocate memory
+ * by doing block IO as we would deadlock. For the same reason we cannot wait
+ * for anything allocating memory not heeding these constraints.
+ *
+ * So we have to control all work items that can be on the workqueue we flush.
+ * Hence we cannot share a queue and need our own.
+ */
+static struct workqueue_struct *workqueue;
+
static void uas_do_work(struct work_struct *work)
{
struct uas_dev_info *devinfo =
if (!err)
cmdinfo->state &= ~IS_IN_WORK_LIST;
else
- schedule_work(&devinfo->work);
+ queue_work(workqueue, &devinfo->work);
}
out:
spin_unlock_irqrestore(&devinfo->lock, flags);
lockdep_assert_held(&devinfo->lock);
cmdinfo->state |= IS_IN_WORK_LIST;
- schedule_work(&devinfo->work);
+ queue_work(workqueue, &devinfo->work);
}
static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
struct uas_cmd_info *ci = (void *)&cmnd->SCp;
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+ if (status == -ENODEV) /* too late */
+ return;
+
scmd_printk(KERN_INFO, cmnd,
"%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
prefix, status, cmdinfo->uas_tag,
.id_table = uas_usb_ids,
};
-module_usb_driver(uas_driver);
+static int __init uas_init(void)
+{
+ int rv;
+
+ workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
+ if (!workqueue)
+ return -ENOMEM;
+
+ rv = usb_register(&uas_driver);
+ if (rv) {
+ destroy_workqueue(workqueue);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void __exit uas_exit(void)
+{
+ usb_deregister(&uas_driver);
+ destroy_workqueue(workqueue);
+}
+
+module_init(uas_init);
+module_exit(uas_exit);
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(USB_STORAGE);
USB_SC_DEVICE,USB_PR_DEVICE,NULL,
US_FL_MAX_SECTORS_64 ),
+/* Reported by Cyril Roelandt <tipecaml@gmail.com> */
+UNUSUAL_DEV( 0x357d, 0x7788, 0x0114, 0x0114,
+ "JMicron",
+ "USB to ATA/ATAPI Bridge",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BROKEN_FUA ),
+
/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100,
"iRiver",
const struct typec_altmode *
typec_altmode_get_partner(struct typec_altmode *adev)
{
- return adev ? &to_altmode(adev)->partner->adev : NULL;
+ if (!adev || !to_altmode(adev)->partner)
+ return NULL;
+
+ return &to_altmode(adev)->partner->adev;
}
EXPORT_SYMBOL_GPL(typec_altmode_get_partner);
static int pi3usb30532_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
- struct typec_switch_desc sw_desc;
- struct typec_mux_desc mux_desc;
+ struct typec_switch_desc sw_desc = { };
+ struct typec_mux_desc mux_desc = { };
struct pi3usb30532 *pi;
int ret;
*/
break;
+ case PORT_RESET:
+ case PORT_RESET_WAIT_OFF:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore CC changes here.
+ */
+ break;
+
default:
if (tcpm_port_is_disconnected(port))
tcpm_set_state(port, unattached_state(port), 0);
case SRC_TRY_DEBOUNCE:
/* Do nothing, waiting for sink detection */
break;
+
+ case PORT_RESET:
+ case PORT_RESET_WAIT_OFF:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore vbus changes here.
+ */
+ break;
+
default:
break;
}
case PORT_RESET_WAIT_OFF:
tcpm_set_state(port, tcpm_default_state(port), 0);
break;
+
case SRC_TRY_WAIT:
case SRC_TRY_DEBOUNCE:
/* Do nothing, waiting for sink detection */
break;
+
+ case PORT_RESET:
+ /*
+ * State set back to default mode once the timer completes.
+ * Ignore vbus changes here.
+ */
+ break;
+
default:
if (port->pwr_role == TYPEC_SINK &&
port->attached)
# SPDX-License-Identifier: GPL-2.0-only
-config VDPA
- tristate
+menuconfig VDPA
+ tristate "vDPA drivers"
help
Enable this module to support vDPA device that uses a
datapath which complies with virtio specifications with
vendor specific control path.
-menuconfig VDPA_MENU
- bool "VDPA drivers"
- default n
-
-if VDPA_MENU
+if VDPA
config VDPA_SIM
tristate "vDPA device simulator"
- depends on RUNTIME_TESTING_MENU
- select VDPA
+ depends on RUNTIME_TESTING_MENU && HAS_DMA && VHOST_DPN
select VHOST_RING
default n
help
development of vDPA.
config IFCVF
- tristate "Intel IFC VF VDPA driver"
+ tristate "Intel IFC VF vDPA driver"
depends on PCI_MSI
- select VDPA
default n
help
This kernel module can drive Intel IFC VF NIC to offload
To compile this driver as a module, choose M here: the module will
be called ifcvf.
-endif # VDPA_MENU
+endif # VDPA
static int ifcvf_hw_enable(struct ifcvf_hw *hw)
{
- struct ifcvf_lm_cfg __iomem *ifcvf_lm;
struct virtio_pci_common_cfg __iomem *cfg;
struct ifcvf_adapter *ifcvf;
u32 i;
- ifcvf_lm = (struct ifcvf_lm_cfg __iomem *)hw->lm_cfg;
ifcvf = vf_to_adapter(hw);
cfg = hw->common_cfg;
ifc_iowrite16(IFCVF_MSI_CONFIG_OFF, &cfg->msix_config);
static int ifcvf_start_datapath(void *private)
{
struct ifcvf_hw *vf = ifcvf_private_to_vf(private);
- struct ifcvf_adapter *ifcvf;
u8 status;
int ret;
- ifcvf = vf_to_adapter(vf);
vf->nr_vring = IFCVF_MAX_QUEUE_PAIRS * 2;
ret = ifcvf_start_hw(vf);
if (ret < 0) {
return IFCVF_SUBSYS_VENDOR_ID;
}
-static u16 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
+static u32 ifcvf_vdpa_get_vq_align(struct vdpa_device *vdpa_dev)
{
return IFCVF_QUEUE_ALIGNMENT;
}
/**
* vdpa_register_device - register a vDPA device
- * Callers must have a succeed call of vdpa_init_device() before.
+ * Callers must have a succeed call of vdpa_alloc_device() before.
* @vdev: the vdpa device to be registered to vDPA bus
*
* Returns an error when fail to add to vDPA bus
return vrh->last_avail_idx;
}
-static u16 vdpasim_get_vq_align(struct vdpa_device *vdpa)
+static u32 vdpasim_get_vq_align(struct vdpa_device *vdpa)
{
return VDPASIM_QUEUE_ALIGN;
}
status = vdpasim->status;
spin_unlock(&vdpasim->lock);
- return vdpasim->status;
+ return status;
}
static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status)
tristate
help
Generic IOTLB implementation for vhost and vringh.
+ This option is selected by any driver which needs to support
+ an IOMMU in software.
config VHOST_RING
tristate
This option is selected by any driver which needs to access
the host side of a virtio ring.
+config VHOST_DPN
+ bool
+ depends on !ARM || AEABI
+ default y
+ help
+ Anything selecting VHOST or VHOST_RING must depend on VHOST_DPN.
+ This excludes the deprecated ARM ABI since that forces a 4 byte
+ alignment on all structs - incompatible with virtio spec requirements.
+
config VHOST
tristate
select VHOST_IOTLB
config VHOST_NET
tristate "Host kernel accelerator for virtio net"
- depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP)
+ depends on NET && EVENTFD && (TUN || !TUN) && (TAP || !TAP) && VHOST_DPN
select VHOST
---help---
This kernel module can be loaded in host kernel to accelerate
config VHOST_SCSI
tristate "VHOST_SCSI TCM fabric driver"
- depends on TARGET_CORE && EVENTFD
+ depends on TARGET_CORE && EVENTFD && VHOST_DPN
select VHOST
default n
---help---
config VHOST_VSOCK
tristate "vhost virtio-vsock driver"
- depends on VSOCKETS && EVENTFD
+ depends on VSOCKETS && EVENTFD && VHOST_DPN
select VHOST
select VIRTIO_VSOCKETS_COMMON
default n
config VHOST_VDPA
tristate "Vhost driver for vDPA-based backend"
- depends on EVENTFD
+ depends on EVENTFD && VHOST_DPN
select VHOST
- select VDPA
+ depends on VDPA
help
This kernel module can be loaded in host kernel to accelerate
guest virtio devices with the vDPA-based backends.
struct vhost_net_virtqueue *nvq =
container_of(vq, struct vhost_net_virtqueue, vq);
struct vhost_poll *poll = n->poll + (nvq - n->vqs);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
return;
vhost_poll_stop(poll);
}
struct vhost_poll *poll = n->poll + (nvq - n->vqs);
struct socket *sock;
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
if (!sock)
return 0;
return;
vhost_disable_notify(&net->dev, vq);
- sock = rvq->private_data;
+ sock = vhost_vq_get_backend(rvq);
busyloop_timeout = poll_rx ? rvq->busyloop_timeout:
tvq->busyloop_timeout;
if (r == tvq->num && tvq->busyloop_timeout) {
/* Flush batched packets first */
- if (!vhost_sock_zcopy(tvq->private_data))
- vhost_tx_batch(net, tnvq, tvq->private_data, msghdr);
+ if (!vhost_sock_zcopy(vhost_vq_get_backend(tvq)))
+ vhost_tx_batch(net, tnvq,
+ vhost_vq_get_backend(tvq),
+ msghdr);
vhost_net_busy_poll(net, rvq, tvq, busyloop_intr, false);
struct vhost_virtqueue *vq = &nvq->vq;
struct vhost_net *net = container_of(vq->dev, struct vhost_net,
dev);
- struct socket *sock = vq->private_data;
+ struct socket *sock = vhost_vq_get_backend(vq);
struct page_frag *alloc_frag = &net->page_frag;
struct virtio_net_hdr *gso;
struct xdp_buff *xdp = &nvq->xdp[nvq->batched_xdp];
struct socket *sock;
mutex_lock_nested(&vq->mutex, VHOST_NET_VQ_TX);
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
if (!sock)
goto out;
int recv_pkts = 0;
mutex_lock_nested(&vq->mutex, VHOST_NET_VQ_RX);
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
if (!sock)
goto out;
container_of(vq, struct vhost_net_virtqueue, vq);
mutex_lock(&vq->mutex);
- sock = vq->private_data;
+ sock = vhost_vq_get_backend(vq);
vhost_net_disable_vq(n, vq);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
vhost_net_buf_unproduce(nvq);
nvq->rx_ring = NULL;
mutex_unlock(&vq->mutex);
}
/* start polling new socket */
- oldsock = vq->private_data;
+ oldsock = vhost_vq_get_backend(vq);
if (sock != oldsock) {
ubufs = vhost_net_ubuf_alloc(vq,
sock && vhost_sock_zcopy(sock));
}
vhost_net_disable_vq(n, vq);
- vq->private_data = sock;
+ vhost_vq_set_backend(vq, sock);
vhost_net_buf_unproduce(nvq);
r = vhost_vq_init_access(vq);
if (r)
return 0;
err_used:
- vq->private_data = oldsock;
+ vhost_vq_set_backend(vq, oldsock);
vhost_net_enable_vq(n, vq);
if (ubufs)
vhost_net_ubuf_put_wait_and_free(ubufs);
unsigned out, in;
int head, ret;
- if (!vq->private_data) {
+ if (!vhost_vq_get_backend(vq)) {
vs->vs_events_missed = true;
return;
}
} else {
struct vhost_scsi_tpg **vs_tpg, *tpg;
- vs_tpg = vq->private_data; /* validated at handler entry */
+ vs_tpg = vhost_vq_get_backend(vq); /* validated at handler entry */
tpg = READ_ONCE(vs_tpg[*vc->target]);
if (unlikely(!tpg)) {
* We can handle the vq only after the endpoint is setup by calling the
* VHOST_SCSI_SET_ENDPOINT ioctl.
*/
- vs_tpg = vq->private_data;
+ vs_tpg = vhost_vq_get_backend(vq);
if (!vs_tpg)
goto out;
* We can handle the vq only after the endpoint is setup by calling the
* VHOST_SCSI_SET_ENDPOINT ioctl.
*/
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
memset(&vc, 0, sizeof(vc));
struct vhost_scsi *vs = container_of(vq->dev, struct vhost_scsi, dev);
mutex_lock(&vq->mutex);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
if (vs->vs_events_missed)
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) {
vq = &vs->vqs[i].vq;
mutex_lock(&vq->mutex);
- vq->private_data = vs_tpg;
+ vhost_vq_set_backend(vq, vs_tpg);
vhost_vq_init_access(vq);
mutex_unlock(&vq->mutex);
}
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) {
vq = &vs->vqs[i].vq;
mutex_lock(&vq->mutex);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
}
}
void *private;
mutex_lock(&vq->mutex);
- private = vq->private_data;
+ private = vhost_vq_get_backend(vq);
if (!private) {
mutex_unlock(&vq->mutex);
return;
vqs[VHOST_TEST_VQ] = &n->vqs[VHOST_TEST_VQ];
n->vqs[VHOST_TEST_VQ].handle_kick = handle_vq_kick;
vhost_dev_init(dev, vqs, VHOST_TEST_VQ_MAX, UIO_MAXIOV,
- VHOST_TEST_PKT_WEIGHT, VHOST_TEST_WEIGHT);
+ VHOST_TEST_PKT_WEIGHT, VHOST_TEST_WEIGHT, NULL);
f->private_data = n;
void *private;
mutex_lock(&vq->mutex);
- private = vq->private_data;
- vq->private_data = NULL;
+ private = vhost_vq_get_backend(vq);
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
return private;
}
priv = test ? n : NULL;
/* start polling new socket */
- oldpriv = vq->private_data;
- vq->private_data = priv;
+ oldpriv = vhost_vq_get_backend(vq);
+ vhost_vq_set_backend(vq, priv);
r = vhost_vq_init_access(&n->vqs[index]);
{
void *priv = NULL;
long err;
- struct vhost_umem *umem;
+ struct vhost_iotlb *umem;
mutex_lock(&n->dev.mutex);
err = vhost_dev_check_owner(&n->dev);
struct vdpa_callback cb;
struct vhost_virtqueue *vq;
struct vhost_vring_state s;
- u8 status;
u32 idx;
long r;
idx = array_index_nospec(idx, v->nvqs);
vq = &v->vqs[idx];
- status = ops->get_status(vdpa);
-
if (cmd == VHOST_VDPA_SET_VRING_ENABLE) {
if (copy_from_user(&s, argp, sizeof(s)))
return -EFAULT;
int nvqs, i, r, opened;
v = container_of(inode->i_cdev, struct vhost_vdpa, cdev);
- if (!v)
- return -ENODEV;
opened = atomic_cmpxchg(&v->opened, 0, 1);
if (opened)
(1ULL << VIRTIO_F_VERSION_1)
};
+/**
+ * vhost_vq_set_backend - Set backend.
+ *
+ * @vq Virtqueue.
+ * @private_data The private data.
+ *
+ * Context: Need to call with vq->mutex acquired.
+ */
+static inline void vhost_vq_set_backend(struct vhost_virtqueue *vq,
+ void *private_data)
+{
+ vq->private_data = private_data;
+}
+
+/**
+ * vhost_vq_get_backend - Get backend.
+ *
+ * @vq Virtqueue.
+ *
+ * Context: Need to call with vq->mutex acquired.
+ * Return: Private data previously set with vhost_vq_set_backend.
+ */
+static inline void *vhost_vq_get_backend(struct vhost_virtqueue *vq)
+{
+ return vq->private_data;
+}
+
static inline bool vhost_has_feature(struct vhost_virtqueue *vq, int bit)
{
return vq->acked_features & (1ULL << bit);
#include <linux/uaccess.h>
#include <linux/slab.h>
#include <linux/export.h>
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
#include <linux/bvec.h>
#include <linux/highmem.h>
#include <linux/vhost_iotlb.h>
+#endif
#include <uapi/linux/virtio_config.h>
static __printf(1,2) __cold void vringh_bad(const char *fmt, ...)
}
EXPORT_SYMBOL(vringh_need_notify_kern);
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
+
static int iotlb_translate(const struct vringh *vrh,
u64 addr, u64 len, struct bio_vec iov[],
int iov_size, u32 perm)
}
EXPORT_SYMBOL(vringh_need_notify_iotlb);
+#endif
MODULE_LICENSE("GPL");
mutex_lock(&vq->mutex);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
/* Avoid further vmexits, we're already processing the virtqueue */
mutex_lock(&vq->mutex);
- if (!vq->private_data)
+ if (!vhost_vq_get_backend(vq))
goto out;
vhost_disable_notify(&vsock->dev, vq);
goto err_vq;
}
- if (!vq->private_data) {
- vq->private_data = vsock;
+ if (!vhost_vq_get_backend(vq)) {
+ vhost_vq_set_backend(vq, vsock);
ret = vhost_vq_init_access(vq);
if (ret)
goto err_vq;
return 0;
err_vq:
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) {
vq = &vsock->vqs[i];
mutex_lock(&vq->mutex);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
}
err:
struct vhost_virtqueue *vq = &vsock->vqs[i];
mutex_lock(&vq->mutex);
- vq->private_data = NULL;
+ vhost_vq_set_backend(vq, NULL);
mutex_unlock(&vq->mutex);
}
config VIRTIO_VDPA
tristate "vDPA driver for virtio devices"
- select VDPA
+ depends on VDPA
select VIRTIO
help
This driver provides support for virtio based paravirtual
}
-int virtballoon_free_page_report(struct page_reporting_dev_info *pr_dev_info,
+static int virtballoon_free_page_report(struct page_reporting_dev_info *pr_dev_info,
struct scatterlist *sg, unsigned int nents)
{
struct virtio_balloon *vb =
if (test_and_clear_bit(VIRTIO_BALLOON_CONFIG_READ_CMD_ID,
&vb->config_read_bitmap))
virtio_cread(vb->vdev, struct virtio_balloon_config,
- free_page_report_cmd_id,
+ free_page_hint_cmd_id,
&vb->cmd_id_received_cache);
return vb->cmd_id_received_cache;
#include <linux/virtio.h>
#include <linux/virtio_config.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <uapi/linux/virtio_ids.h>
#include <uapi/linux/virtio_input.h>
spin_lock(&server->probe_lock);
- if (!test_bit(AFS_SERVER_FL_HAVE_EPOCH, &server->flags)) {
+ if (!test_and_set_bit(AFS_SERVER_FL_HAVE_EPOCH, &server->flags)) {
server->cm_epoch = call->epoch;
server->probe.cm_epoch = call->epoch;
goto out;
(unsigned int)rtt, ret);
have_result |= afs_fs_probe_done(server);
- if (have_result) {
- server->probe.have_result = true;
- wake_up_var(&server->probe.have_result);
+ if (have_result)
wake_up_all(&server->probe_wq);
- }
}
/*
u32 abort_code;
u32 cm_epoch;
short error;
- bool have_result;
bool responded:1;
bool is_yfs:1;
bool not_yfs:1;
bool local_failure:1;
- bool no_epoch:1;
bool cm_probed:1;
bool said_rebooted:1;
bool said_inconsistent:1;
extern void afs_activate_volume(struct afs_volume *);
extern void afs_deactivate_volume(struct afs_volume *);
extern void afs_put_volume(struct afs_cell *, struct afs_volume *);
-extern int afs_check_volume_status(struct afs_volume *, struct key *);
+extern int afs_check_volume_status(struct afs_volume *, struct afs_fs_cursor *);
/*
* write.c
write_unlock(&vnode->volume->servers_lock);
set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
set_bit(AFS_VOLUME_WAIT, &vnode->volume->flags);
set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
/* See if we need to do an update of the volume record. Note that the
* volume may have moved or even have been deleted.
*/
- error = afs_check_volume_status(vnode->volume, fc->key);
+ error = afs_check_volume_status(vnode->volume, fc);
if (error < 0)
goto failed_set_error;
}
ret = wait_on_bit(&server->flags, AFS_SERVER_FL_UPDATING,
- TASK_INTERRUPTIBLE);
+ (fc->flags & AFS_FS_CURSOR_INTR) ?
+ TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
if (ret == -ERESTARTSYS) {
- if (!(fc->flags & AFS_FS_CURSOR_INTR) && server->addresses) {
- _leave(" = t [intr]");
- return true;
- }
fc->error = ret;
_leave(" = f [intr]");
return false;
pr_notice("VC: - nr=%u/%u/%u pf=%u\n",
a->nr_ipv4, a->nr_addrs, a->max_addrs,
a->preferred);
- pr_notice("VC: - pr=%lx R=%lx F=%lx\n",
- a->probed, a->responded, a->failed);
+ pr_notice("VC: - R=%lx F=%lx\n",
+ a->responded, a->failed);
if (a == vc->ac.alist)
pr_notice("VC: - current\n");
}
/*
* Make sure the volume record is up to date.
*/
-int afs_check_volume_status(struct afs_volume *volume, struct key *key)
+int afs_check_volume_status(struct afs_volume *volume, struct afs_fs_cursor *fc)
{
time64_t now = ktime_get_real_seconds();
int ret, retries = 0;
}
if (!test_and_set_bit_lock(AFS_VOLUME_UPDATING, &volume->flags)) {
- ret = afs_update_volume_status(volume, key);
+ ret = afs_update_volume_status(volume, fc->key);
clear_bit_unlock(AFS_VOLUME_WAIT, &volume->flags);
clear_bit_unlock(AFS_VOLUME_UPDATING, &volume->flags);
wake_up_bit(&volume->flags, AFS_VOLUME_WAIT);
return 0;
}
- ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT, TASK_INTERRUPTIBLE);
+ ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT,
+ (fc->flags & AFS_FS_CURSOR_INTR) ?
+ TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
if (ret == -ERESTARTSYS) {
_leave(" = %d", ret);
return ret;
#include <linux/module.h>
#include <linux/blkpg.h>
#include <linux/magic.h>
-#include <linux/dax.h>
#include <linux/buffer_head.h>
#include <linux/swap.h>
#include <linux/pagevec.h>
struct gendisk *disk = bdev->bd_disk;
struct block_device *victim = NULL;
+ /*
+ * Sync early if it looks like we're the last one. If someone else
+ * opens the block device between now and the decrement of bd_openers
+ * then we did a sync that we didn't need to, but that's not the end
+ * of the world and we want to avoid long (could be several minute)
+ * syncs while holding the mutex.
+ */
+ if (bdev->bd_openers == 1)
+ sync_blockdev(bdev);
+
mutex_lock_nested(&bdev->bd_mutex, for_part);
if (for_part)
bdev->bd_part_count--;
path = btrfs_alloc_path();
if (!path) {
ret = -ENOMEM;
- goto out;
+ goto out_put_group;
}
/*
ret = btrfs_orphan_add(trans, BTRFS_I(inode));
if (ret) {
btrfs_add_delayed_iput(inode);
- goto out;
+ goto out_put_group;
}
clear_nlink(inode);
/* One for the block groups ref */
ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
if (ret < 0)
- goto out;
+ goto out_put_group;
if (ret > 0)
btrfs_release_path(path);
if (ret == 0) {
ret = btrfs_del_item(trans, tree_root, path);
if (ret)
- goto out;
+ goto out_put_group;
btrfs_release_path(path);
}
ret = remove_block_group_free_space(trans, block_group);
if (ret)
- goto out;
+ goto out_put_group;
- btrfs_put_block_group(block_group);
+ /* Once for the block groups rbtree */
btrfs_put_block_group(block_group);
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
/* once for the tree */
free_extent_map(em);
}
+
+out_put_group:
+ /* Once for the lookup reference */
+ btrfs_put_block_group(block_group);
out:
if (remove_rsv)
btrfs_delayed_refs_rsv_release(fs_info, 1);
if (ret)
goto err;
mutex_unlock(&fs_info->unused_bg_unpin_mutex);
+ if (prev_trans)
+ btrfs_put_transaction(prev_trans);
return true;
err:
mutex_unlock(&fs_info->unused_bg_unpin_mutex);
+ if (prev_trans)
+ btrfs_put_transaction(prev_trans);
btrfs_dec_block_group_ro(bg);
return false;
}
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
#ifndef BTRFS_DISCARD_H
#define BTRFS_DISCARD_H
for (i = 0; i < ret; i++)
btrfs_drop_and_free_fs_root(fs_info, gang[i]);
}
-
- if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state))
- btrfs_free_log_root_tree(NULL, fs_info);
}
static void btrfs_init_scrub(struct btrfs_fs_info *fs_info)
spin_unlock(&fs_info->fs_roots_radix_lock);
if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
- btrfs_free_log(NULL, root);
+ ASSERT(root->log_root == NULL);
if (root->reloc_root) {
btrfs_put_root(root->reloc_root);
root->reloc_root = NULL;
up_write(&fs_info->cleanup_work_sem);
}
+static void btrfs_drop_all_logs(struct btrfs_fs_info *fs_info)
+{
+ struct btrfs_root *gang[8];
+ u64 root_objectid = 0;
+ int ret;
+
+ spin_lock(&fs_info->fs_roots_radix_lock);
+ while ((ret = radix_tree_gang_lookup(&fs_info->fs_roots_radix,
+ (void **)gang, root_objectid,
+ ARRAY_SIZE(gang))) != 0) {
+ int i;
+
+ for (i = 0; i < ret; i++)
+ gang[i] = btrfs_grab_root(gang[i]);
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+
+ for (i = 0; i < ret; i++) {
+ if (!gang[i])
+ continue;
+ root_objectid = gang[i]->root_key.objectid;
+ btrfs_free_log(NULL, gang[i]);
+ btrfs_put_root(gang[i]);
+ }
+ root_objectid++;
+ spin_lock(&fs_info->fs_roots_radix_lock);
+ }
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+ btrfs_free_log_root_tree(NULL, fs_info);
+}
+
static void btrfs_destroy_ordered_extents(struct btrfs_root *root)
{
struct btrfs_ordered_extent *ordered;
btrfs_destroy_delayed_inodes(fs_info);
btrfs_assert_delayed_root_empty(fs_info);
btrfs_destroy_all_delalloc_inodes(fs_info);
+ btrfs_drop_all_logs(fs_info);
mutex_unlock(&fs_info->transaction_kthread_mutex);
return 0;
if (IS_ERR(fs_root)) {
err = PTR_ERR(fs_root);
list_add_tail(&reloc_root->root_list, &reloc_roots);
+ btrfs_end_transaction(trans);
goto out_unset;
}
struct page *page;
struct buffer_head *bh;
sector_t end_block;
- int ret = 0; /* Will call free_more_memory() */
+ int ret = 0;
gfp_t gfp_mask;
gfp_mask = mapping_gfp_constraint(inode->i_mapping, ~__GFP_FS) | gfp;
/*
* This lock protects the cifs_tcp_ses_list, the list of smb sessions per
* tcp session, and the list of tcon's per smb session. It also protects
- * the reference counters for the server, smb session, and tcon. Finally,
+ * the reference counters for the server, smb session, and tcon. It also
+ * protects some fields in the TCP_Server_Info struct such as dstaddr. Finally,
* changes to the tcon->tidStatus should be done while holding this lock.
* generally the locks should be taken in order tcp_ses_lock before
* tcon->open_file_lock and that before file->file_info_lock since the
return rc;
}
+ spin_lock(&cifs_tcp_ses_lock);
rc = cifs_convert_address((struct sockaddr *)&server->dstaddr, ipaddr,
strlen(ipaddr));
+ spin_unlock(&cifs_tcp_ses_lock);
kfree(ipaddr);
return !rc ? -1 : 0;
spin_lock(&cifs_tcp_ses_lock);
list_for_each(tmp, &ses->tcon_list) {
tcon = list_entry(tmp, struct cifs_tcon, tcon_list);
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ if (tcon->dfs_path)
+ continue;
+#endif
if (!match_tcon(tcon, volume_info))
continue;
++tcon->tc_count;
}
struct super_cb_data {
- struct TCP_Server_Info *server;
+ void *data;
struct super_block *sb;
};
-static void super_cb(struct super_block *sb, void *arg)
+static void tcp_super_cb(struct super_block *sb, void *arg)
{
- struct super_cb_data *d = arg;
+ struct super_cb_data *sd = arg;
+ struct TCP_Server_Info *server = sd->data;
struct cifs_sb_info *cifs_sb;
struct cifs_tcon *tcon;
- if (d->sb)
+ if (sd->sb)
return;
cifs_sb = CIFS_SB(sb);
tcon = cifs_sb_master_tcon(cifs_sb);
- if (tcon->ses->server == d->server)
- d->sb = sb;
+ if (tcon->ses->server == server)
+ sd->sb = sb;
}
-struct super_block *cifs_get_tcp_super(struct TCP_Server_Info *server)
+static struct super_block *__cifs_get_super(void (*f)(struct super_block *, void *),
+ void *data)
{
- struct super_cb_data d = {
- .server = server,
+ struct super_cb_data sd = {
+ .data = data,
.sb = NULL,
};
- iterate_supers_type(&cifs_fs_type, super_cb, &d);
+ iterate_supers_type(&cifs_fs_type, f, &sd);
- if (unlikely(!d.sb))
- return ERR_PTR(-ENOENT);
+ if (!sd.sb)
+ return ERR_PTR(-EINVAL);
/*
* Grab an active reference in order to prevent automounts (DFS links)
* of expiring and then freeing up our cifs superblock pointer while
* we're doing failover.
*/
- cifs_sb_active(d.sb);
- return d.sb;
+ cifs_sb_active(sd.sb);
+ return sd.sb;
}
-void cifs_put_tcp_super(struct super_block *sb)
+static void __cifs_put_super(struct super_block *sb)
{
if (!IS_ERR_OR_NULL(sb))
cifs_sb_deactive(sb);
}
+struct super_block *cifs_get_tcp_super(struct TCP_Server_Info *server)
+{
+ return __cifs_get_super(tcp_super_cb, server);
+}
+
+void cifs_put_tcp_super(struct super_block *sb)
+{
+ __cifs_put_super(sb);
+}
+
+#ifdef CONFIG_CIFS_DFS_UPCALL
+static void tcon_super_cb(struct super_block *sb, void *arg)
+{
+ struct super_cb_data *sd = arg;
+ struct cifs_tcon *tcon = sd->data;
+ struct cifs_sb_info *cifs_sb;
+
+ if (sd->sb)
+ return;
+
+ cifs_sb = CIFS_SB(sb);
+ if (tcon->dfs_path && cifs_sb->origin_fullpath &&
+ !strcasecmp(tcon->dfs_path, cifs_sb->origin_fullpath))
+ sd->sb = sb;
+}
+
+static inline struct super_block *cifs_get_tcon_super(struct cifs_tcon *tcon)
+{
+ return __cifs_get_super(tcon_super_cb, tcon);
+}
+
+static inline void cifs_put_tcon_super(struct super_block *sb)
+{
+ __cifs_put_super(sb);
+}
+#else
+static inline struct super_block *cifs_get_tcon_super(struct cifs_tcon *tcon)
+{
+ return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline void cifs_put_tcon_super(struct super_block *sb)
+{
+}
+#endif
+
int update_super_prepath(struct cifs_tcon *tcon, const char *prefix,
size_t prefix_len)
{
struct cifs_sb_info *cifs_sb;
int rc = 0;
- sb = cifs_get_tcp_super(tcon->ses->server);
+ sb = cifs_get_tcon_super(tcon);
if (IS_ERR(sb))
return PTR_ERR(sb);
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_USE_PREFIX_PATH;
out:
- cifs_put_tcp_super(sb);
+ cifs_put_tcon_super(sb);
return rc;
}
if (smb3_encryption_required(tcon))
flags |= CIFS_TRANSFORM_REQ;
+ if (!server->ops->new_lease_key)
+ return -EIO;
+
+ server->ops->new_lease_key(pfid);
+
memset(rqst, 0, sizeof(rqst));
resp_buftype[0] = resp_buftype[1] = CIFS_NO_BUFFER;
memset(rsp_iov, 0, sizeof(rsp_iov));
return -ENOMEM;
(*argv)[(*argc)++] = 0;
++pat_ptr;
+ if (!(*pat_ptr))
+ return -ENOMEM;
}
/* Repeat as long as we have more pattern to process and more output
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
- *
- * This function will return a pointer to a dentry if it succeeds. This
- * pointer must be passed to the debugfs_remove() function when the file is
- * to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, ERR_PTR(-ERROR) will be
- * returned.
- *
- * If debugfs is not enabled in the kernel, the value ERR_PTR(-ENODEV) will
- * be returned.
*/
-struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent, u32 *value)
+void debugfs_create_u32(const char *name, umode_t mode, struct dentry *parent,
+ u32 *value)
{
- return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u32,
+ debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u32,
&fops_u32_ro, &fops_u32_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_u32);
}
}
- sbi->pbr_bh = NULL;
return 0;
}
{
int i;
- brelse(sbi->pbr_bh);
-
for (i = 0; i < sbi->map_sectors; i++)
__brelse(sbi->vol_amap[i]);
__printf(3, 4) __cold;
void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
u8 tz, __le16 time, __le16 date, u8 time_ms);
+void exfat_truncate_atime(struct timespec64 *ts);
void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts,
u8 *tz, __le16 *time, __le16 *date, u8 *time_ms);
unsigned short exfat_calc_chksum_2byte(void *data, int len,
struct exfat_inode_info *ei = EXFAT_I(inode);
generic_fillattr(inode, stat);
+ exfat_truncate_atime(&stat->atime);
stat->result_mask |= STATX_BTIME;
stat->btime.tv_sec = ei->i_crtime.tv_sec;
stat->btime.tv_nsec = ei->i_crtime.tv_nsec;
}
setattr_copy(inode, attr);
+ exfat_truncate_atime(&inode->i_atime);
mark_inode_dirty(inode);
out:
if (time_ms) {
ts->tv_sec += time_ms / 100;
ts->tv_nsec = (time_ms % 100) * 10 * NSEC_PER_MSEC;
- }
+ } else
+ ts->tv_nsec = 0;
if (tz & EXFAT_TZ_VALID)
/* Adjust timezone to UTC0. */
*tz = EXFAT_TZ_VALID;
}
+/*
+ * The timestamp for access_time has double seconds granularity.
+ * (There is no 10msIncrement field for access_time unlike create/modify_time)
+ * atime also has only a 2-second resolution.
+ */
+void exfat_truncate_atime(struct timespec64 *ts)
+{
+ ts->tv_sec = round_down(ts->tv_sec, 2);
+ ts->tv_nsec = 0;
+}
+
unsigned short exfat_calc_chksum_2byte(void *data, int len,
unsigned short chksum, int type)
{
inode_inc_iversion(inode);
inode->i_mtime = inode->i_atime = inode->i_ctime =
EXFAT_I(inode)->i_crtime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
d_instantiate(dentry, inode);
inode_inc_iversion(dir);
dir->i_mtime = dir->i_atime = current_time(dir);
+ exfat_truncate_atime(&dir->i_atime);
if (IS_DIRSYNC(dir))
exfat_sync_inode(dir);
else
clear_nlink(inode);
inode->i_mtime = inode->i_atime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
exfat_unhash_inode(inode);
exfat_d_version_set(dentry, inode_query_iversion(dir));
unlock:
inode_inc_iversion(inode);
inode->i_mtime = inode->i_atime = inode->i_ctime =
EXFAT_I(inode)->i_crtime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
d_instantiate(dentry, inode);
inode_inc_iversion(dir);
dir->i_mtime = dir->i_atime = current_time(dir);
+ exfat_truncate_atime(&dir->i_atime);
if (IS_DIRSYNC(dir))
exfat_sync_inode(dir);
else
clear_nlink(inode);
inode->i_mtime = inode->i_atime = current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
exfat_unhash_inode(inode);
exfat_d_version_set(dentry, inode_query_iversion(dir));
unlock:
inode_inc_iversion(new_dir);
new_dir->i_ctime = new_dir->i_mtime = new_dir->i_atime =
EXFAT_I(new_dir)->i_crtime = current_time(new_dir);
+ exfat_truncate_atime(&new_dir->i_atime);
if (IS_DIRSYNC(new_dir))
exfat_sync_inode(new_dir);
else
sync_blockdev(sb->s_bdev);
exfat_set_vol_flags(sb, VOL_CLEAN);
exfat_free_bitmap(sbi);
+ brelse(sbi->pbr_bh);
mutex_unlock(&sbi->s_lock);
call_rcu(&sbi->rcu, exfat_delayed_free);
int exfat_set_vol_flags(struct super_block *sb, unsigned short new_flag)
{
struct exfat_sb_info *sbi = EXFAT_SB(sb);
- struct pbr64 *bpb;
+ struct pbr64 *bpb = (struct pbr64 *)sbi->pbr_bh->b_data;
bool sync = 0;
/* flags are not changed */
if (sb_rdonly(sb))
return 0;
- if (!sbi->pbr_bh) {
- sbi->pbr_bh = sb_bread(sb, 0);
- if (!sbi->pbr_bh) {
- exfat_msg(sb, KERN_ERR, "failed to read boot sector");
- return -ENOMEM;
- }
- }
-
- bpb = (struct pbr64 *)sbi->pbr_bh->b_data;
bpb->bsx.vol_flags = cpu_to_le16(new_flag);
if (new_flag == VOL_DIRTY && !buffer_dirty(sbi->pbr_bh))
seq_puts(m, ",iocharset=utf8");
else if (sbi->nls_io)
seq_printf(m, ",iocharset=%s", sbi->nls_io->charset);
- seq_printf(m, ",bps=%ld", sb->s_blocksize);
if (opts->errors == EXFAT_ERRORS_CONT)
seq_puts(m, ",errors=continue");
else if (opts->errors == EXFAT_ERRORS_PANIC)
exfat_save_attr(inode, ATTR_SUBDIR);
inode->i_mtime = inode->i_atime = inode->i_ctime = ei->i_crtime =
current_time(inode);
+ exfat_truncate_atime(&inode->i_atime);
exfat_cache_init_inode(inode);
return 0;
}
-static struct pbr *exfat_read_pbr_with_logical_sector(struct super_block *sb,
- struct buffer_head **prev_bh)
+static struct pbr *exfat_read_pbr_with_logical_sector(struct super_block *sb)
{
- struct pbr *p_pbr = (struct pbr *) (*prev_bh)->b_data;
+ struct exfat_sb_info *sbi = EXFAT_SB(sb);
+ struct pbr *p_pbr = (struct pbr *) (sbi->pbr_bh)->b_data;
unsigned short logical_sect = 0;
logical_sect = 1 << p_pbr->bsx.f64.sect_size_bits;
}
if (logical_sect > sb->s_blocksize) {
- struct buffer_head *bh = NULL;
-
- __brelse(*prev_bh);
- *prev_bh = NULL;
+ brelse(sbi->pbr_bh);
+ sbi->pbr_bh = NULL;
if (!sb_set_blocksize(sb, logical_sect)) {
exfat_msg(sb, KERN_ERR,
"unable to set blocksize %u", logical_sect);
return NULL;
}
- bh = sb_bread(sb, 0);
- if (!bh) {
+ sbi->pbr_bh = sb_bread(sb, 0);
+ if (!sbi->pbr_bh) {
exfat_msg(sb, KERN_ERR,
"unable to read boot sector (logical sector size = %lu)",
sb->s_blocksize);
return NULL;
}
- *prev_bh = bh;
- p_pbr = (struct pbr *) bh->b_data;
+ p_pbr = (struct pbr *)sbi->pbr_bh->b_data;
}
return p_pbr;
}
int ret;
struct pbr *p_pbr;
struct pbr64 *p_bpb;
- struct buffer_head *bh;
struct exfat_sb_info *sbi = EXFAT_SB(sb);
/* set block size to read super block */
sb_min_blocksize(sb, 512);
/* read boot sector */
- bh = sb_bread(sb, 0);
- if (!bh) {
+ sbi->pbr_bh = sb_bread(sb, 0);
+ if (!sbi->pbr_bh) {
exfat_msg(sb, KERN_ERR, "unable to read boot sector");
return -EIO;
}
/* PRB is read */
- p_pbr = (struct pbr *)bh->b_data;
+ p_pbr = (struct pbr *)sbi->pbr_bh->b_data;
/* check the validity of PBR */
if (le16_to_cpu((p_pbr->signature)) != PBR_SIGNATURE) {
/* check logical sector size */
- p_pbr = exfat_read_pbr_with_logical_sector(sb, &bh);
+ p_pbr = exfat_read_pbr_with_logical_sector(sb);
if (!p_pbr) {
ret = -EIO;
goto free_bh;
free_upcase_table:
exfat_free_upcase_table(sbi);
free_bh:
- brelse(bh);
+ brelse(sbi->pbr_bh);
return ret;
}
if (opts->discard) {
struct request_queue *q = bdev_get_queue(sb->s_bdev);
- if (!blk_queue_discard(q))
+ if (!blk_queue_discard(q)) {
exfat_msg(sb, KERN_WARNING,
"mounting with \"discard\" option, but the device does not support discard");
- opts->discard = 0;
+ opts->discard = 0;
+ }
}
sb->s_flags |= SB_NODIRATIME;
sb->s_magic = EXFAT_SUPER_MAGIC;
sb->s_op = &exfat_sops;
- sb->s_time_gran = 1;
+ sb->s_time_gran = 10 * NSEC_PER_MSEC;
sb->s_time_min = EXFAT_MIN_TIMESTAMP_SECS;
sb->s_time_max = EXFAT_MAX_TIMESTAMP_SECS;
free_table:
exfat_free_upcase_table(sbi);
exfat_free_bitmap(sbi);
+ brelse(sbi->pbr_bh);
check_nls_io:
unload_nls(sbi->nls_io);
module_init(init_exfat_fs);
module_exit(exit_exfat_fs);
+MODULE_ALIAS_FS("exfat");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("exFAT filesystem support");
MODULE_AUTHOR("Samsung Electronics Co., Ltd.");
spin_unlock_irq(&ctx->completion_lock);
+ /* restore ->work in case we need to retry again */
+ memcpy(&req->work, &apoll->work, sizeof(req->work));
+
if (canceled) {
kfree(apoll);
io_cqring_ev_posted(ctx);
req_set_fail_links(req);
- io_put_req(req);
+ io_double_put_req(req);
return;
}
- /* restore ->work in case we need to retry again */
- memcpy(&req->work, &apoll->work, sizeof(req->work));
-
__set_current_state(TASK_RUNNING);
mutex_lock(&ctx->uring_lock);
__io_queue_sqe(req, NULL);
hash_del(&req->hash_node);
- if (apoll) {
+ if (do_complete && apoll) {
/*
* restore ->work because we need to call io_req_work_drop_env.
*/
container_of(work, struct nfsd4_callback, cb_work);
struct nfs4_client *clp = cb->cb_clp;
struct rpc_clnt *clnt;
+ int flags;
if (cb->cb_need_restart) {
cb->cb_need_restart = false;
}
cb->cb_msg.rpc_cred = clp->cl_cb_cred;
- rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | RPC_TASK_SOFTCONN,
+ flags = clp->cl_minorversion ? RPC_TASK_NOCONNECT : RPC_TASK_SOFTCONN;
+ rpc_call_async(clnt, &cb->cb_msg, RPC_TASK_SOFT | flags,
cb->cb_ops ? &nfsd4_cb_ops : &nfsd4_cb_probe_ops, cb);
}
if (!nbl) {
nbl= kmalloc(sizeof(*nbl), GFP_KERNEL);
if (nbl) {
+ INIT_LIST_HEAD(&nbl->nbl_list);
+ INIT_LIST_HEAD(&nbl->nbl_lru);
fh_copy_shallow(&nbl->nbl_fh, fh);
locks_init_lock(&nbl->nbl_lock);
nfsd4_init_cb(&nbl->nbl_cb, lo->lo_owner.so_client,
loff_t *ppos)
{
int bytes_left;
- ssize_t writelen;
char *lvb_buf;
struct inode *inode = file_inode(filp);
if (*ppos >= i_size_read(inode))
return -ENOSPC;
+ /* don't write past the lvb */
+ if (count > i_size_read(inode) - *ppos)
+ count = i_size_read(inode) - *ppos;
+
if (!count)
return 0;
if (!access_ok(buf, count))
return -EFAULT;
- /* don't write past the lvb */
- if ((count + *ppos) > i_size_read(inode))
- writelen = i_size_read(inode) - *ppos;
- else
- writelen = count - *ppos;
-
- lvb_buf = kmalloc(writelen, GFP_NOFS);
+ lvb_buf = kmalloc(count, GFP_NOFS);
if (!lvb_buf)
return -ENOMEM;
- bytes_left = copy_from_user(lvb_buf, buf, writelen);
- writelen -= bytes_left;
- if (writelen)
- user_dlm_write_lvb(inode, lvb_buf, writelen);
+ bytes_left = copy_from_user(lvb_buf, buf, count);
+ count -= bytes_left;
+ if (count)
+ user_dlm_write_lvb(inode, lvb_buf, count);
kfree(lvb_buf);
- *ppos = *ppos + writelen;
- mlog(0, "wrote %zd bytes\n", writelen);
- return writelen;
+ *ppos = *ppos + count;
+ mlog(0, "wrote %zu bytes\n", count);
+ return count;
}
static void dlmfs_init_once(void *foo)
child = copy_tree(last_source, last_source->mnt.mnt_root, type);
if (IS_ERR(child))
return PTR_ERR(child);
+ read_seqlock_excl(&mount_lock);
mnt_set_mountpoint(m, mp, child);
+ if (m->mnt_master != dest_master)
+ SET_MNT_MARK(m->mnt_master);
+ read_sequnlock_excl(&mount_lock);
last_dest = m;
last_source = child;
- if (m->mnt_master != dest_master) {
- read_seqlock_excl(&mount_lock);
- SET_MNT_MARK(m->mnt_master);
- read_sequnlock_excl(&mount_lock);
- }
hlist_add_head(&child->mnt_hash, list);
return count_mounts(m->mnt_ns, child);
}
void proc_flush_pid(struct pid *pid)
{
proc_invalidate_siblings_dcache(&pid->inodes, &pid->lock);
- put_pid(pid);
}
static struct dentry *proc_pid_instantiate(struct dentry * dentry,
if (start < offset + dump->size) {
tsz = min(offset + (u64)dump->size - start, (u64)size);
buf = dump->buf + start - offset;
- if (remap_vmalloc_range_partial(vma, dst, buf, tsz)) {
+ if (remap_vmalloc_range_partial(vma, dst, buf, 0,
+ tsz)) {
ret = -EFAULT;
goto out_unlock;
}
tsz = min(elfcorebuf_sz + elfnotes_sz - (size_t)start, size);
kaddr = elfnotes_buf + start - elfcorebuf_sz - vmcoredd_orig_sz;
if (remap_vmalloc_range_partial(vma, vma->vm_start + len,
- kaddr, tsz))
+ kaddr, 0, tsz))
goto fail;
size -= tsz;
mutex_lock(&bdev->bd_fsfreeze_mutex);
if (bdev->bd_fsfreeze_count > 0) {
mutex_unlock(&bdev->bd_fsfreeze_mutex);
- blkdev_put(bdev, mode);
warnf(fc, "%pg: Can't mount, blockdev is frozen", bdev);
+ blkdev_put(bdev, mode);
return -EBUSY;
}
mandatory-y += trace_clock.h
mandatory-y += uaccess.h
mandatory-y += unaligned.h
+mandatory-y += vermagic.h
mandatory-y += vga.h
mandatory-y += word-at-a-time.h
mandatory-y += xor.h
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_GENERIC_VERMAGIC_H
+#define _ASM_GENERIC_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC ""
+
+#endif /* _ASM_GENERIC_VERMAGIC_H */
WB_REASON_SYNC,
WB_REASON_PERIODIC,
WB_REASON_LAPTOP_TIMER,
- WB_REASON_FREE_MORE_MEM,
WB_REASON_FS_FREE_SPACE,
/*
* There is no bdi forker thread any more and works are done
u8 *value);
void debugfs_create_u16(const char *name, umode_t mode, struct dentry *parent,
u16 *value);
-struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent, u32 *value);
+void debugfs_create_u32(const char *name, umode_t mode, struct dentry *parent,
+ u32 *value);
void debugfs_create_u64(const char *name, umode_t mode, struct dentry *parent,
u64 *value);
struct dentry *debugfs_create_ulong(const char *name, umode_t mode,
static inline void debugfs_create_u16(const char *name, umode_t mode,
struct dentry *parent, u16 *value) { }
-static inline struct dentry *debugfs_create_u32(const char *name, umode_t mode,
- struct dentry *parent,
- u32 *value)
-{
- return ERR_PTR(-ENODEV);
-}
+static inline void debugfs_create_u32(const char *name, umode_t mode,
+ struct dentry *parent, u32 *value) { }
static inline void debugfs_create_u64(const char *name, umode_t mode,
struct dentry *parent, u64 *value) { }
* 0 on success, negative error number on failure.
*/
#define devm_iio_device_register(dev, indio_dev) \
- __devm_iio_device_register((dev), (indio_dev), THIS_MODULE);
+ __devm_iio_device_register((dev), (indio_dev), THIS_MODULE)
int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
struct module *this_mod);
void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);
start = slot + 1;
}
- if (gfn >= memslots[start].base_gfn &&
+ if (start < slots->used_slots && gfn >= memslots[start].base_gfn &&
gfn < memslots[start].base_gfn + memslots[start].npages) {
atomic_set(&slots->lru_slot, start);
return &memslots[start];
#define global_to_pnp_card(n) list_entry(n, struct pnp_card, global_list)
#define protocol_to_pnp_card(n) list_entry(n, struct pnp_card, protocol_list)
#define to_pnp_card(n) container_of(n, struct pnp_card, dev)
-#define pnp_for_each_card(card) \
- for((card) = global_to_pnp_card(pnp_cards.next); \
- (card) != global_to_pnp_card(&pnp_cards); \
- (card) = global_to_pnp_card((card)->global_list.next))
+#define pnp_for_each_card(card) \
+ list_for_each_entry(card, &pnp_cards, global_list)
struct pnp_card_link {
struct pnp_card *card;
#define card_to_pnp_dev(n) list_entry(n, struct pnp_dev, card_list)
#define protocol_to_pnp_dev(n) list_entry(n, struct pnp_dev, protocol_list)
#define to_pnp_dev(n) container_of(n, struct pnp_dev, dev)
-#define pnp_for_each_dev(dev) \
- for((dev) = global_to_pnp_dev(pnp_global.next); \
- (dev) != global_to_pnp_dev(&pnp_global); \
- (dev) = global_to_pnp_dev((dev)->global_list.next))
-#define card_for_each_dev(card,dev) \
- for((dev) = card_to_pnp_dev((card)->devices.next); \
- (dev) != card_to_pnp_dev(&(card)->devices); \
- (dev) = card_to_pnp_dev((dev)->card_list.next))
+#define pnp_for_each_dev(dev) list_for_each_entry(dev, &pnp_global, global_list)
+#define card_for_each_dev(card, dev) \
+ list_for_each_entry(dev, &(card)->devices, card_list)
#define pnp_dev_name(dev) (dev)->name
static inline void *pnp_get_drvdata(struct pnp_dev *pdev)
};
#define to_pnp_protocol(n) list_entry(n, struct pnp_protocol, protocol_list)
-#define protocol_for_each_card(protocol,card) \
- for((card) = protocol_to_pnp_card((protocol)->cards.next); \
- (card) != protocol_to_pnp_card(&(protocol)->cards); \
- (card) = protocol_to_pnp_card((card)->protocol_list.next))
-#define protocol_for_each_dev(protocol,dev) \
- for((dev) = protocol_to_pnp_dev((protocol)->devices.next); \
- (dev) != protocol_to_pnp_dev(&(protocol)->devices); \
- (dev) = protocol_to_pnp_dev((dev)->protocol_list.next))
+#define protocol_for_each_card(protocol, card) \
+ list_for_each_entry(card, &(protocol)->cards, protocol_list)
+#define protocol_for_each_dev(protocol, dev) \
+ list_for_each_entry(dev, &(protocol)->devices, protocol_list)
extern struct bus_type pnp_bus_type;
struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES];
struct stmmac_txq_cfg tx_queues_cfg[MTL_MAX_TX_QUEUES];
void (*fix_mac_speed)(void *priv, unsigned int speed);
+ int (*serdes_powerup)(struct net_device *ndev, void *priv);
+ void (*serdes_powerdown)(struct net_device *ndev, void *priv);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
struct mac_device_info *(*setup)(void *priv);
extern void svc_rdma_recv_ctxt_put(struct svcxprt_rdma *rdma,
struct svc_rdma_recv_ctxt *ctxt);
extern void svc_rdma_flush_recv_queues(struct svcxprt_rdma *rdma);
+extern void svc_rdma_release_rqst(struct svc_rqst *rqstp);
extern int svc_rdma_recvfrom(struct svc_rqst *);
/* svc_rdma_rw.c */
* Note, the proto and args passed in includes "__data" as the first parameter.
* The reason for this is to handle the "void" prototype. If a tracepoint
* has a "void" prototype, then it is invalid to declare a function
- * as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just
- * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto".
+ * as "(void *, void)".
*/
#define __DO_TRACE(tp, proto, args, cond, rcuidle) \
do { \
# define __tracepoint_string
#endif
-/*
- * The need for the DECLARE_TRACE_NOARGS() is to handle the prototype
- * (void). "void" is a special value in a function prototype and can
- * not be combined with other arguments. Since the DECLARE_TRACE()
- * macro adds a data element at the beginning of the prototype,
- * we need a way to differentiate "(void *data, proto)" from
- * "(void *data, void)". The second prototype is invalid.
- *
- * DECLARE_TRACE_NOARGS() passes "void" as the tracepoint prototype
- * and "void *__data" as the callback prototype.
- *
- * DECLARE_TRACE() passes "proto" as the tracepoint protoype and
- * "void *__data, proto" as the callback prototype.
- */
-#define DECLARE_TRACE_NOARGS(name) \
- __DECLARE_TRACE(name, void, , \
- cpu_online(raw_smp_processor_id()), \
- void *__data, __data)
-
#define DECLARE_TRACE(name, proto, args) \
__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), \
cpu_online(raw_smp_processor_id()), \
u64 (*get_vq_state)(struct vdpa_device *vdev, u16 idx);
/* Device ops */
- u16 (*get_vq_align)(struct vdpa_device *vdev);
+ u32 (*get_vq_align)(struct vdpa_device *vdev);
u64 (*get_features)(struct vdpa_device *vdev);
int (*set_features)(struct vdpa_device *vdev, u64 features);
void (*set_config_cb)(struct vdpa_device *vdev,
/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_VERMAGIC_H
+#define _LINUX_VERMAGIC_H
+
#include <generated/utsrelease.h>
+#include <asm/vermagic.h>
/* Simply sanity version stamp for modules. */
#ifdef CONFIG_SMP
#else
#define MODULE_VERMAGIC_MODVERSIONS ""
#endif
-#ifndef MODULE_ARCH_VERMAGIC
-#define MODULE_ARCH_VERMAGIC ""
-#endif
#ifdef RANDSTRUCT_PLUGIN
#include <generated/randomize_layout_hash.h>
#define MODULE_RANDSTRUCT_PLUGIN "RANDSTRUCT_PLUGIN_" RANDSTRUCT_HASHED_SEED
MODULE_ARCH_VERMAGIC \
MODULE_RANDSTRUCT_PLUGIN
+#endif /* _LINUX_VERMAGIC_H */
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/gfp.h>
-#include <linux/vringh.h>
/**
* virtqueue - a queue to register buffers for sending or receiving.
extern int remap_vmalloc_range_partial(struct vm_area_struct *vma,
unsigned long uaddr, void *kaddr,
- unsigned long size);
+ unsigned long pgoff, unsigned long size);
extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr,
unsigned long pgoff);
#include <linux/virtio_byteorder.h>
#include <linux/uio.h>
#include <linux/slab.h>
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
#include <linux/dma-direction.h>
#include <linux/vhost_iotlb.h>
+#endif
#include <asm/barrier.h>
/* virtio_ring with information needed for host access. */
return __cpu_to_virtio64(vringh_is_little_endian(vrh), val);
}
+#if IS_REACHABLE(CONFIG_VHOST_IOTLB)
+
void vringh_set_iotlb(struct vringh *vrh, struct vhost_iotlb *iotlb);
int vringh_init_iotlb(struct vringh *vrh, u64 features,
int vringh_need_notify_iotlb(struct vringh *vrh);
+#endif /* CONFIG_VHOST_IOTLB */
+
#endif /* _LINUX_VRINGH_H */
struct rate_control_ops {
unsigned long capa;
const char *name;
- void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+ void *(*alloc)(struct ieee80211_hw *hw);
+ void (*add_debugfs)(struct ieee80211_hw *hw, void *priv,
+ struct dentry *debugfsdir);
void (*free)(void *priv);
void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
ND_OPT_DNSSL = 31, /* RFC6106 */
ND_OPT_6CO = 34, /* RFC6775 */
ND_OPT_CAPTIVE_PORTAL = 37, /* RFC7710 */
- ND_OPT_PREF64 = 38, /* RFC-ietf-6man-ra-pref64-09 */
+ ND_OPT_PREF64 = 38, /* RFC8781 */
__ND_OPT_MAX
};
extern struct percpu_counter tcp_orphan_count;
void tcp_time_wait(struct sock *sk, int state, int timeo);
-#define MAX_TCP_HEADER (128 + MAX_HEADER)
+#define MAX_TCP_HEADER L1_CACHE_ALIGN(128 + MAX_HEADER)
#define MAX_TCP_OPTION_SPACE 40
#define TCP_MIN_SND_MSS 48
#define TCP_MIN_GSO_SIZE (TCP_MIN_SND_MSS - MAX_TCP_OPTION_SPACE)
int tegra_io_rail_power_on(unsigned int id);
int tegra_io_rail_power_off(unsigned int id);
-enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
return -ENOSYS;
}
-static inline enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
-{
- return TEGRA_SUSPEND_NONE;
-}
-
static inline void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
{
}
#endif /* CONFIG_SOC_TEGRA_PMC */
+#if defined(CONFIG_SOC_TEGRA_PMC) && defined(CONFIG_PM_SLEEP)
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+#else
+static inline enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
+{
+ return TEGRA_SUSPEND_NONE;
+}
+#endif
+
#endif /* __SOC_TEGRA_PMC_H__ */
/* bit field */
unsigned int probed:1;
- unsigned int started[SNDRV_PCM_STREAM_LAST + 1];
};
static inline struct snd_soc_pcm_stream *
const struct snd_soc_pcm_stream *params;
unsigned int num_params;
+ struct snd_soc_dapm_widget *playback_widget;
+ struct snd_soc_dapm_widget *capture_widget;
+
unsigned int dai_fmt; /* format to set on init */
enum snd_soc_dpcm_trigger trigger[2]; /* trigger type for DPCM */
TRACE_EVENT(iocost_ioc_vrate_adj,
- TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 (*missed_ppm)[2],
+ TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 *missed_ppm,
u32 rq_wait_pct, int nr_lagging, int nr_shortages,
int nr_surpluses),
__entry->old_vrate = atomic64_read(&ioc->vtime_rate);;
__entry->new_vrate = new_vrate;
__entry->busy_level = ioc->busy_level;
- __entry->read_missed_ppm = (*missed_ppm)[READ];
- __entry->write_missed_ppm = (*missed_ppm)[WRITE];
+ __entry->read_missed_ppm = missed_ppm[READ];
+ __entry->write_missed_ppm = missed_ppm[WRITE];
__entry->rq_wait_pct = rq_wait_pct;
__entry->nr_lagging = nr_lagging;
__entry->nr_shortages = nr_shortages;
TRACE_EVENT(svcrdma_post_send,
TP_PROTO(
- const struct ib_send_wr *wr,
- int status
+ const struct ib_send_wr *wr
),
- TP_ARGS(wr, status),
+ TP_ARGS(wr),
TP_STRUCT__entry(
__field(const void *, cqe)
__field(unsigned int, num_sge)
__field(u32, inv_rkey)
- __field(int, status)
),
TP_fast_assign(
__entry->num_sge = wr->num_sge;
__entry->inv_rkey = (wr->opcode == IB_WR_SEND_WITH_INV) ?
wr->ex.invalidate_rkey : 0;
- __entry->status = status;
),
- TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x status=%d",
+ TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x",
__entry->cqe, __entry->num_sge,
- __entry->inv_rkey, __entry->status
+ __entry->inv_rkey
)
);
TRACE_EVENT(svcrdma_post_rw,
TP_PROTO(
const void *cqe,
- int sqecount,
- int status
+ int sqecount
),
- TP_ARGS(cqe, sqecount, status),
+ TP_ARGS(cqe, sqecount),
TP_STRUCT__entry(
__field(const void *, cqe)
__field(int, sqecount)
- __field(int, status)
),
TP_fast_assign(
__entry->cqe = cqe;
__entry->sqecount = sqecount;
- __entry->status = status;
),
- TP_printk("cqe=%p sqecount=%d status=%d",
- __entry->cqe, __entry->sqecount, __entry->status
+ TP_printk("cqe=%p sqecount=%d",
+ __entry->cqe, __entry->sqecount
)
);
DEFINE_SQ_EVENT(full);
DEFINE_SQ_EVENT(retry);
+TRACE_EVENT(svcrdma_sq_post_err,
+ TP_PROTO(
+ const struct svcxprt_rdma *rdma,
+ int status
+ ),
+
+ TP_ARGS(rdma, status),
+
+ TP_STRUCT__entry(
+ __field(int, avail)
+ __field(int, depth)
+ __field(int, status)
+ __string(addr, rdma->sc_xprt.xpt_remotebuf)
+ ),
+
+ TP_fast_assign(
+ __entry->avail = atomic_read(&rdma->sc_sq_avail);
+ __entry->depth = rdma->sc_sq_depth;
+ __entry->status = status;
+ __assign_str(addr, rdma->sc_xprt.xpt_remotebuf);
+ ),
+
+ TP_printk("addr=%s sc_sq_avail=%d/%d status=%d",
+ __get_str(addr), __entry->avail, __entry->depth,
+ __entry->status
+ )
+);
+
#endif /* _TRACE_RPCRDMA_H */
#include <trace/define_trace.h>
EM( WB_REASON_SYNC, "sync") \
EM( WB_REASON_PERIODIC, "periodic") \
EM( WB_REASON_LAPTOP_TIMER, "laptop_timer") \
- EM( WB_REASON_FREE_MORE_MEM, "free_more_memory") \
EM( WB_REASON_FS_FREE_SPACE, "fs_free_space") \
EMe(WB_REASON_FORKER_THREAD, "forker_thread")
* ifindex, but doesn't require a map to do so.
* Return
* **XDP_REDIRECT** on success, or the value of the two lower bits
- * of the **flags* argument on error.
+ * of the *flags* argument on error.
*
* int bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
* Description
struct hv_fcopy_hdr {
__u32 operation;
- uuid_le service_id0; /* currently unused */
- uuid_le service_id1; /* currently unused */
+ __u8 service_id0[16]; /* currently unused */
+ __u8 service_id1[16]; /* currently unused */
} __attribute__((packed));
#define OVER_WRITE 0x1
__u32 num_pages;
/* Number of pages we've actually got in balloon. */
__u32 actual;
- /* Free page report command id, readonly by guest */
- __u32 free_page_report_cmd_id;
+ /*
+ * Free page hint command id, readonly by guest.
+ * Was previously named free_page_report_cmd_id so we
+ * need to carry that name for legacy support.
+ */
+ union {
+ __u32 free_page_hint_cmd_id;
+ __u32 free_page_report_cmd_id; /* deprecated */
+ };
/* Stores PAGE_POISON if page poisoning is in use */
__u32 poison_val;
};
*
* @offset is used by the special time namespace VVAR pages which are
* installed instead of the real VVAR page. These namespace pages must set
- * @seq to 1 and @clock_mode to VLOCK_TIMENS to force the code into the
- * time namespace slow path. The namespace aware functions retrieve the
+ * @seq to 1 and @clock_mode to VDSO_CLOCKMODE_TIMENS to force the code into
+ * the time namespace slow path. The namespace aware functions retrieve the
* real system wide VVAR page, read host time and add the per clock offset.
* For clocks which are not affected by time namespace adjustment the
* offset must be zero.
case AUDIT_FIRST_USER_MSG2 ... AUDIT_LAST_USER_MSG2:
if (!audit_enabled && msg_type != AUDIT_USER_AVC)
return 0;
+ /* exit early if there isn't at least one character to print */
+ if (data_len < 2)
+ return -EINVAL;
err = audit_filter(msg_type, AUDIT_FILTER_USER);
if (err == 1) { /* match or error */
return -EOVERFLOW;
/* Make sure CPU is a valid possible cpu */
- if (!cpu_possible(key_cpu))
+ if (key_cpu >= nr_cpumask_bits || !cpu_possible(key_cpu))
return -ENODEV;
if (qsize == 0) {
}
#endif
-const struct file_operations bpf_link_fops = {
+static const struct file_operations bpf_link_fops = {
#ifdef CONFIG_PROC_FS
.show_fdinfo = bpf_link_show_fdinfo,
#endif
return PTR_ERR(link);
new_prog = bpf_prog_get(attr->link_update.new_prog_fd);
- if (IS_ERR(new_prog))
- return PTR_ERR(new_prog);
+ if (IS_ERR(new_prog)) {
+ ret = PTR_ERR(new_prog);
+ goto out_put_link;
+ }
if (flags & BPF_F_REPLACE) {
old_prog = bpf_prog_get(attr->link_update.old_prog_fd);
old_prog = NULL;
goto out_put_progs;
}
+ } else if (attr->link_update.old_prog_fd) {
+ ret = -EINVAL;
+ goto out_put_progs;
}
#ifdef CONFIG_CGROUP_BPF
bpf_prog_put(old_prog);
if (ret)
bpf_prog_put(new_prog);
+out_put_link:
+ bpf_link_put(link);
return ret;
}
return reg->type == SCALAR_VALUE && tnum_is_const(reg->var_off);
}
+static bool __is_pointer_value(bool allow_ptr_leaks,
+ const struct bpf_reg_state *reg)
+{
+ if (allow_ptr_leaks)
+ return false;
+
+ return reg->type != SCALAR_VALUE;
+}
+
static void save_register_state(struct bpf_func_state *state,
int spi, struct bpf_reg_state *reg)
{
* which resets stack/reg liveness for state transitions
*/
state->regs[value_regno].live |= REG_LIVE_WRITTEN;
+ } else if (__is_pointer_value(env->allow_ptr_leaks, reg)) {
+ /* If value_regno==-1, the caller is asking us whether
+ * it is acceptable to use this value as a SCALAR_VALUE
+ * (e.g. for XADD).
+ * We must not allow unprivileged callers to do that
+ * with spilled pointers.
+ */
+ verbose(env, "leaking pointer from stack off %d\n",
+ off);
+ return -EACCES;
}
mark_reg_read(env, reg, reg->parent, REG_LIVE_READ64);
} else {
return -EACCES;
}
-static bool __is_pointer_value(bool allow_ptr_leaks,
- const struct bpf_reg_state *reg)
-{
- if (allow_ptr_leaks)
- return false;
-
- return reg->type != SCALAR_VALUE;
-}
-
static struct bpf_reg_state *reg_state(struct bpf_verifier_env *env, int regno)
{
return cur_regs(env) + regno;
if (ret < 0)
return ret;
- if (atype == BPF_READ) {
+ if (atype == BPF_READ && value_regno >= 0) {
if (ret == SCALAR_VALUE) {
mark_reg_unknown(env, regs, value_regno);
return 0;
return -EINVAL;
}
env->ops = bpf_verifier_ops[tgt_prog->type];
+ prog->expected_attach_type = tgt_prog->expected_attach_type;
}
if (!tgt_prog->jited) {
verbose(env, "Can attach to only JITed progs\n");
* them now. Otherwise free_used_maps() will release them.
*/
release_maps(env);
+
+ /* extension progs temporarily inherit the attach_type of their targets
+ for verification purposes, so set it back to zero before returning
+ */
+ if (env->prog->type == BPF_PROG_TYPE_EXT)
+ env->prog->expected_attach_type = 0;
+
*prog = env->prog;
err_unlock:
if (!is_priv)
goto out;
task_event->event_id.pid = perf_event_pid(event, task);
- task_event->event_id.ppid = perf_event_pid(event, current);
-
task_event->event_id.tid = perf_event_tid(event, task);
- task_event->event_id.ptid = perf_event_tid(event, current);
+
+ if (task_event->event_id.header.type == PERF_RECORD_EXIT) {
+ task_event->event_id.ppid = perf_event_pid(event,
+ task->real_parent);
+ task_event->event_id.ptid = perf_event_pid(event,
+ task->real_parent);
+ } else { /* PERF_RECORD_FORK */
+ task_event->event_id.ppid = perf_event_pid(event, current);
+ task_event->event_id.ptid = perf_event_tid(event, current);
+ }
task_event->event_id.time = perf_event_clock(event);
write_unlock_irq(&tasklist_lock);
proc_flush_pid(thread_pid);
+ put_pid(thread_pid);
release_thread(p);
put_task_struct_rcu_user(p);
return;
for_each_clamp_id(clamp_id) {
- unsigned int clamp_value = uclamp_none(clamp_id);
-
- /* By default, RT tasks always get 100% boost */
- if (unlikely(rt_task(p) && clamp_id == UCLAMP_MIN))
- clamp_value = uclamp_none(UCLAMP_MAX);
-
- uclamp_se_set(&p->uclamp_req[clamp_id], clamp_value, false);
+ uclamp_se_set(&p->uclamp_req[clamp_id],
+ uclamp_none(clamp_id), false);
}
}
if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
sig = 0;
}
+ /*
+ * Send with __send_signal as si_pid and si_uid are in the
+ * parent's namespaces.
+ */
if (valid_signal(sig) && sig)
- __group_send_sig_info(sig, &info, tsk->parent);
+ __send_signal(sig, &info, tsk->parent, PIDTYPE_TGID, false);
__wake_up_parent(tsk, tsk->parent);
spin_unlock_irqrestore(&psig->siglock, flags);
list_del_rcu(&direct->next);
synchronize_rcu_tasks();
kfree(direct);
+ kfree(entry);
ftrace_direct_func_count--;
}
}
kfree(hist_field->name);
kfree(hist_field->type);
+ kfree(hist_field->system);
+ kfree(hist_field->event_name);
+
kfree(hist_field);
}
goto out;
}
+ var->ref = 1;
var->flags = HIST_FIELD_FL_VAR;
var->var.idx = idx;
var->var.hist_data = var->hist_data = hist_data;
for (i = 0; i < hist_data->n_field_vars; i++)
destroy_field_var(hist_data->field_vars[i]);
+
+ for (i = 0; i < hist_data->n_save_vars; i++)
+ destroy_field_var(hist_data->save_vars[i]);
}
static void save_field_var(struct hist_trigger_data *hist_data,
return idx;
}
-void tracing_map_array_clear(struct tracing_map_array *a)
+static void tracing_map_array_clear(struct tracing_map_array *a)
{
unsigned int i;
memset(a->pages[i], 0, PAGE_SIZE);
}
-void tracing_map_array_free(struct tracing_map_array *a)
+static void tracing_map_array_free(struct tracing_map_array *a)
{
unsigned int i;
kfree(a);
}
-struct tracing_map_array *tracing_map_array_alloc(unsigned int n_elts,
+static struct tracing_map_array *tracing_map_array_alloc(unsigned int n_elts,
unsigned int entry_size)
{
struct tracing_map_array *a;
do { \
if (__builtin_constant_p(bh) && (bh) == 0) \
__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "%r" ((USItype)(ah)), \
"%r" ((USItype)(al)), \
"rI" ((USItype)(bl))); \
else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "%r" ((USItype)(ah)), \
"%r" ((USItype)(al)), \
"rI" ((USItype)(bl))); \
else \
__asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "%r" ((USItype)(ah)), \
"r" ((USItype)(bh)), \
"%r" ((USItype)(al)), \
do { \
if (__builtin_constant_p(ah) && (ah) == 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(bh)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else if (__builtin_constant_p(ah) && (ah) == ~(USItype) 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(bh)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else if (__builtin_constant_p(bh) && (bh) == 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(ah)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(ah)), \
"rI" ((USItype)(al)), \
"r" ((USItype)(bl))); \
else \
__asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
- : "=r" ((USItype)(sh)), \
- "=&r" ((USItype)(sl)) \
+ : "=r" (sh), \
+ "=&r" (sl) \
: "r" ((USItype)(ah)), \
"r" ((USItype)(bh)), \
"rI" ((USItype)(al)), \
do { \
USItype __m0 = (m0), __m1 = (m1); \
__asm__ ("mulhwu %0,%1,%2" \
- : "=r" ((USItype) ph) \
+ : "=r" (ph) \
: "%r" (__m0), \
"r" (__m1)); \
(pl) = __m0 * __m1; \
* potentially allocating memory.
*/
if (fatal_signal_pending(current)) {
- ret = -ERESTARTSYS;
+ ret = -EINTR;
goto out;
}
cond_resched();
{
pgd_t *pgd;
p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
+ pud_t *pud, pud_entry;
+ pmd_t *pmd, pmd_entry;
pgd = pgd_offset(mm, addr);
if (!pgd_present(*pgd))
return NULL;
pud = pud_offset(p4d, addr);
- if (sz != PUD_SIZE && pud_none(*pud))
+ pud_entry = READ_ONCE(*pud);
+ if (sz != PUD_SIZE && pud_none(pud_entry))
return NULL;
/* hugepage or swap? */
- if (pud_huge(*pud) || !pud_present(*pud))
+ if (pud_huge(pud_entry) || !pud_present(pud_entry))
return (pte_t *)pud;
pmd = pmd_offset(pud, addr);
- if (sz != PMD_SIZE && pmd_none(*pmd))
+ pmd_entry = READ_ONCE(*pmd);
+ if (sz != PMD_SIZE && pmd_none(pmd_entry))
return NULL;
/* hugepage or swap? */
- if (pmd_huge(*pmd) || !pmd_present(*pmd))
+ if (pmd_huge(pmd_entry) || !pmd_present(pmd_entry))
return (pte_t *)pmd;
return NULL;
down_read(&mm->mmap_sem);
vma = find_mergeable_vma(mm, rmap_item->address);
- err = try_to_merge_one_page(vma, page,
- ZERO_PAGE(rmap_item->address));
+ if (vma) {
+ err = try_to_merge_one_page(vma, page,
+ ZERO_PAGE(rmap_item->address));
+ } else {
+ /*
+ * If the vma is out of date, we do not need to
+ * continue.
+ */
+ err = 0;
+ }
up_read(&mm->mmap_sem);
/*
* In case of failure, the page was not really empty, so we
#include <linux/swapops.h>
#include <linux/shmem_fs.h>
#include <linux/mmu_notifier.h>
+#include <linux/sched/mm.h>
#include <asm/tlb.h>
if (write) {
if (down_write_killable(¤t->mm->mmap_sem))
return -EINTR;
+
+ /*
+ * We may have stolen the mm from another process
+ * that is undergoing core dumping.
+ *
+ * Right now that's io_ring, in the future it may
+ * be remote process management and not "current"
+ * at all.
+ *
+ * We need to fix core dumping to not do this,
+ * but for now we have the mmget_still_valid()
+ * model.
+ */
+ if (!mmget_still_valid(current->mm)) {
+ up_write(¤t->mm->mmap_sem);
+ return -EINTR;
+ }
} else {
down_read(¤t->mm->mmap_sem);
}
VM_BUG_ON_PAGE(PageWriteback(page), page);
if (shmem_punch_compound(page, start, end))
truncate_inode_page(mapping, page);
- else {
+ else if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
/* Wipe the page and don't get stuck */
clear_highpage(page);
flush_dcache_page(page);
struct shmem_inode_info *info = SHMEM_I(inode);
int retval = -ENOMEM;
- spin_lock_irq(&info->lock);
+ /*
+ * What serializes the accesses to info->flags?
+ * ipc_lock_object() when called from shmctl_do_lock(),
+ * no serialization needed when called from shm_destroy().
+ */
if (lock && !(info->flags & VM_LOCKED)) {
if (!user_shm_lock(inode->i_size, user))
goto out_nomem;
retval = 0;
out_nomem:
- spin_unlock_irq(&info->lock);
return retval;
}
lru_cache_add_anon(page);
- spin_lock(&info->lock);
+ spin_lock_irq(&info->lock);
info->alloced++;
inode->i_blocks += BLOCKS_PER_PAGE;
shmem_recalc_inode(inode);
- spin_unlock(&info->lock);
+ spin_unlock_irq(&info->lock);
inc_mm_counter(dst_mm, mm_counter_file(page));
page_add_file_rmap(page, false);
{
slab_flags_t flags = s->flags;
unsigned int size = s->object_size;
+ unsigned int freepointer_area;
unsigned int order;
/*
* the possible location of the free pointer.
*/
size = ALIGN(size, sizeof(void *));
+ /*
+ * This is the area of the object where a freepointer can be
+ * safely written. If redzoning adds more to the inuse size, we
+ * can't use that portion for writing the freepointer, so
+ * s->offset must be limited within this for the general case.
+ */
+ freepointer_area = size;
#ifdef CONFIG_SLUB_DEBUG
/*
*/
s->offset = size;
size += sizeof(void *);
- } else if (size > sizeof(void *)) {
+ } else if (freepointer_area > sizeof(void *)) {
/*
* Store freelist pointer near middle of object to keep
* it away from the edges of the object to avoid small
* sized over/underflows from neighboring allocations.
*/
- s->offset = ALIGN(size / 2, sizeof(void *));
+ s->offset = ALIGN(freepointer_area / 2, sizeof(void *));
}
#ifdef CONFIG_SLUB_DEBUG
#include <linux/llist.h>
#include <linux/bitops.h>
#include <linux/rbtree_augmented.h>
+#include <linux/overflow.h>
#include <linux/uaccess.h>
#include <asm/tlbflush.h>
* @vma: vma to cover
* @uaddr: target user address to start at
* @kaddr: virtual address of vmalloc kernel memory
+ * @pgoff: offset from @kaddr to start at
* @size: size of map area
*
* Returns: 0 for success, -Exxx on failure
* Similar to remap_pfn_range() (see mm/memory.c)
*/
int remap_vmalloc_range_partial(struct vm_area_struct *vma, unsigned long uaddr,
- void *kaddr, unsigned long size)
+ void *kaddr, unsigned long pgoff,
+ unsigned long size)
{
struct vm_struct *area;
+ unsigned long off;
+ unsigned long end_index;
+
+ if (check_shl_overflow(pgoff, PAGE_SHIFT, &off))
+ return -EINVAL;
size = PAGE_ALIGN(size);
if (!(area->flags & (VM_USERMAP | VM_DMA_COHERENT)))
return -EINVAL;
- if (kaddr + size > area->addr + get_vm_area_size(area))
+ if (check_add_overflow(size, off, &end_index) ||
+ end_index > get_vm_area_size(area))
return -EINVAL;
+ kaddr += off;
do {
struct page *page = vmalloc_to_page(kaddr);
unsigned long pgoff)
{
return remap_vmalloc_range_partial(vma, vma->vm_start,
- addr + (pgoff << PAGE_SHIFT),
+ addr, pgoff,
vma->vm_end - vma->vm_start);
}
EXPORT_SYMBOL(remap_vmalloc_range);
cs->classid = (u32)value;
css_task_iter_start(css, 0, &it);
- while ((p = css_task_iter_next(&it))) {
+ while ((p = css_task_iter_next(&it)))
update_classid_task(p, cs->classid);
- cond_resched();
- }
css_task_iter_end(&it);
return 0;
rtnl_lock();
ret = dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN);
rtnl_unlock();
- if (ret && ret != -EOPNOTSUPP) {
- dev_err(ds->dev, "error %d setting MTU on port %d\n",
- ret, port->index);
- goto out_free;
- }
+ if (ret)
+ dev_warn(ds->dev, "nonfatal error %d setting MTU on port %d\n",
+ ret, port->index);
netif_carrier_off(slave_dev);
hlist_for_each_entry_rcu(fa, fa_head, fa_list) {
struct fib_info *next_fi = fa->fa_info;
- struct fib_nh *nh;
+ struct fib_nh_common *nhc;
if (fa->fa_slen != slen)
continue;
fa->fa_type != RTN_UNICAST)
continue;
- nh = fib_info_nh(next_fi, 0);
- if (!nh->fib_nh_gw4 || nh->fib_nh_scope != RT_SCOPE_LINK)
+ nhc = fib_info_nhc(next_fi, 0);
+ if (!nhc->nhc_gw_family || nhc->nhc_scope != RT_SCOPE_LINK)
continue;
fib_alias_accessed(fa);
{
memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
-#ifdef CONFIG_NETFILTER
IPCB(skb)->flags |= IPSKB_XFRM_TRANSFORMED;
-#endif
return xfrm_output(sk, skb);
}
retv = -EBUSY;
break;
}
- } else if (sk->sk_protocol == IPPROTO_TCP) {
- if (sk->sk_prot != &tcpv6_prot) {
- retv = -EBUSY;
- break;
- }
- break;
- } else {
+ }
+ if (sk->sk_protocol == IPPROTO_TCP &&
+ sk->sk_prot != &tcpv6_prot) {
+ retv = -EBUSY;
break;
}
+ if (sk->sk_protocol != IPPROTO_TCP)
+ break;
if (sk->sk_state != TCP_ESTABLISHED) {
retv = -ENOTCONN;
break;
#include <net/rpl.h>
#define IPV6_PFXTAIL_LEN(x) (sizeof(struct in6_addr) - (x))
+#define IPV6_RPL_BEST_ADDR_COMPRESSION 15
static void ipv6_rpl_addr_decompress(struct in6_addr *dst,
const struct in6_addr *daddr,
}
}
- return plen;
+ return IPV6_RPL_BEST_ADDR_COMPRESSION;
}
static unsigned char ipv6_rpl_srh_calc_cmpre(const struct in6_addr *daddr,
for (plen = 0; plen < sizeof(*daddr); plen++) {
if (daddr->s6_addr[plen] != last_segment->s6_addr[plen])
- break;
+ return plen;
}
- return plen;
+ return IPV6_RPL_BEST_ADDR_COMPRESSION;
}
void ipv6_rpl_srh_compress(struct ipv6_rpl_sr_hdr *outhdr,
{
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
-#ifdef CONFIG_NETFILTER
IP6CB(skb)->flags |= IP6SKB_XFRM_TRANSFORMED;
-#endif
return xfrm_output(sk, skb);
}
local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
IEEE80211_TX_STATUS_HEADROOM);
- debugfs_hw_add(local);
-
/*
* if the driver doesn't specify a max listen interval we
* use 5 which should be a safe default
if (result < 0)
goto fail_wiphy_register;
+ debugfs_hw_add(local);
+ rate_control_add_debugfs(local);
+
rtnl_lock();
/* add one default STA interface if supported */
ref->ops->name, len);
}
-static const struct file_operations rcname_ops = {
+const struct file_operations rcname_ops = {
.read = rcname_read,
.open = simple_open,
.llseek = default_llseek,
};
#endif
-static struct rate_control_ref *rate_control_alloc(const char *name,
- struct ieee80211_local *local)
+static struct rate_control_ref *
+rate_control_alloc(const char *name, struct ieee80211_local *local)
{
- struct dentry *debugfsdir = NULL;
struct rate_control_ref *ref;
ref = kmalloc(sizeof(struct rate_control_ref), GFP_KERNEL);
if (!ref->ops)
goto free;
-#ifdef CONFIG_MAC80211_DEBUGFS
- debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
- local->debugfs.rcdir = debugfsdir;
- debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops);
-#endif
-
- ref->priv = ref->ops->alloc(&local->hw, debugfsdir);
+ ref->priv = ref->ops->alloc(&local->hw);
if (!ref->priv)
goto free;
return ref;
#endif
}
+extern const struct file_operations rcname_ops;
+
+static inline void rate_control_add_debugfs(struct ieee80211_local *local)
+{
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct dentry *debugfsdir;
+
+ if (!local->rate_ctrl)
+ return;
+
+ if (!local->rate_ctrl->ops->add_debugfs)
+ return;
+
+ debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
+ local->debugfs.rcdir = debugfsdir;
+ debugfs_create_file("name", 0400, debugfsdir,
+ local->rate_ctrl, &rcname_ops);
+
+ local->rate_ctrl->ops->add_debugfs(&local->hw, local->rate_ctrl->priv,
+ debugfsdir);
+#endif
+}
+
void ieee80211_check_rate_mask(struct ieee80211_sub_if_data *sdata);
/* Get a reference to the rate control algorithm. If `name' is NULL, get the
}
static void *
-minstrel_ht_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+minstrel_ht_alloc(struct ieee80211_hw *hw)
{
struct minstrel_priv *mp;
mp->update_interval = HZ / 10;
mp->new_avg = true;
+ minstrel_ht_init_cck_rates(mp);
+
+ return mp;
+}
+
#ifdef CONFIG_MAC80211_DEBUGFS
+static void minstrel_ht_add_debugfs(struct ieee80211_hw *hw, void *priv,
+ struct dentry *debugfsdir)
+{
+ struct minstrel_priv *mp = priv;
+
mp->fixed_rate_idx = (u32) -1;
debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
&mp->fixed_rate_idx);
&mp->sample_switch);
debugfs_create_bool("new_avg", S_IRUGO | S_IWUSR, debugfsdir,
&mp->new_avg);
-#endif
-
- minstrel_ht_init_cck_rates(mp);
-
- return mp;
}
+#endif
static void
minstrel_ht_free(void *priv)
.alloc = minstrel_ht_alloc,
.free = minstrel_ht_free,
#ifdef CONFIG_MAC80211_DEBUGFS
+ .add_debugfs = minstrel_ht_add_debugfs,
.add_sta_debugfs = minstrel_ht_add_sta_debugfs,
#endif
.get_expected_throughput = minstrel_ht_get_expected_throughput,
struct sta_info *sta;
int i = 0;
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
+ list_for_each_entry_rcu(sta, &local->sta_list, list,
+ lockdep_is_held(&local->sta_mtx)) {
if (sdata != sta->sdata)
continue;
if (i < idx) {
mpext->data_seq = mp_opt->data_seq;
mpext->subflow_seq = mp_opt->subflow_seq;
mpext->dsn64 = mp_opt->dsn64;
+ mpext->data_fin = mp_opt->data_fin;
}
mpext->data_len = mp_opt->data_len;
mpext->use_map = 1;
}
-
- mpext->data_fin = mp_opt->data_fin;
}
void mptcp_write_options(__be32 *ptr, struct mptcp_out_options *opts)
nla_put_s32(skb, MPTCP_PM_ADDR_ATTR_IF_IDX, entry->ifindex))
goto nla_put_failure;
- if (addr->family == AF_INET)
- nla_put_in_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR4,
- addr->addr.s_addr);
+ if (addr->family == AF_INET &&
+ nla_put_in_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR4,
+ addr->addr.s_addr))
+ goto nla_put_failure;
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
- else if (addr->family == AF_INET6)
- nla_put_in6_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR6, &addr->addr6);
+ else if (addr->family == AF_INET6 &&
+ nla_put_in6_addr(skb, MPTCP_PM_ADDR_ATTR_ADDR6, &addr->addr6))
+ goto nla_put_failure;
#endif
nla_nest_end(skb, attr);
return 0;
}
#endif
-struct sock *mptcp_sk_clone(const struct sock *sk, struct request_sock *req)
+struct sock *mptcp_sk_clone(const struct sock *sk,
+ const struct tcp_options_received *opt_rx,
+ struct request_sock *req)
{
struct mptcp_subflow_request_sock *subflow_req = mptcp_subflow_rsk(req);
struct sock *nsk = sk_clone_lock(sk, GFP_ATOMIC);
msk->subflow = NULL;
if (unlikely(mptcp_token_new_accept(subflow_req->token, nsk))) {
+ nsk->sk_state = TCP_CLOSE;
bh_unlock_sock(nsk);
/* we can't call into mptcp_close() here - possible BH context
- * free the sock directly
+ * free the sock directly.
+ * sk_clone_lock() sets nsk refcnt to two, hence call sk_free()
+ * too.
*/
- nsk->sk_prot->destroy(nsk);
+ sk_common_release(nsk);
sk_free(nsk);
return NULL;
}
msk->write_seq = subflow_req->idsn + 1;
atomic64_set(&msk->snd_una, msk->write_seq);
- if (subflow_req->remote_key_valid) {
+ if (opt_rx->mptcp.mp_capable) {
msk->can_ack = true;
- msk->remote_key = subflow_req->remote_key;
+ msk->remote_key = opt_rx->mptcp.sndr_key;
mptcp_crypto_key_sha(msk->remote_key, NULL, &ack_seq);
ack_seq++;
msk->ack_seq = ack_seq;
}
+ sock_reset_flag(nsk, SOCK_RCU_FREE);
/* will be fully established after successful MPC subflow creation */
inet_sk_state_store(nsk, TCP_SYN_RECV);
bh_unlock_sock(nsk);
newsk = new_mptcp_sock;
mptcp_copy_inaddrs(newsk, ssk);
list_add(&subflow->node, &msk->conn_list);
+ inet_sk_state_store(newsk, TCP_ESTABLISHED);
bh_unlock_sock(new_mptcp_sock);
goto unlock;
}
+ sock_set_flag(sock->sk, SOCK_RCU_FREE);
+
err = ssock->ops->listen(ssock, backlog);
inet_sk_state_store(sock->sk, inet_sk_state_load(ssock->sk));
if (!err)
struct tcp_request_sock sk;
u16 mp_capable : 1,
mp_join : 1,
- backup : 1,
- remote_key_valid : 1;
+ backup : 1;
u8 local_id;
u8 remote_id;
u64 local_key;
- u64 remote_key;
u64 idsn;
u32 token;
u32 ssn_offset;
int mptcp_proto_v6_init(void);
#endif
-struct sock *mptcp_sk_clone(const struct sock *sk, struct request_sock *req);
+struct sock *mptcp_sk_clone(const struct sock *sk,
+ const struct tcp_options_received *opt_rx,
+ struct request_sock *req);
void mptcp_get_options(const struct sk_buff *skb,
struct tcp_options_received *opt_rx);
subflow_req->mp_capable = 0;
subflow_req->mp_join = 0;
- subflow_req->remote_key_valid = 0;
#ifdef CONFIG_TCP_MD5SIG
/* no MPTCP if MD5SIG is enabled on this socket or we may run out of
return ret;
}
+static void mptcp_sock_destruct(struct sock *sk)
+{
+ /* if new mptcp socket isn't accepted, it is free'd
+ * from the tcp listener sockets request queue, linked
+ * from req->sk. The tcp socket is released.
+ * This calls the ULP release function which will
+ * also remove the mptcp socket, via
+ * sock_put(ctx->conn).
+ *
+ * Problem is that the mptcp socket will not be in
+ * SYN_RECV state and doesn't have SOCK_DEAD flag.
+ * Both result in warnings from inet_sock_destruct.
+ */
+
+ if (sk->sk_state == TCP_SYN_RECV) {
+ sk->sk_state = TCP_CLOSE;
+ WARN_ON_ONCE(sk->sk_socket);
+ sock_orphan(sk);
+ }
+
+ inet_sock_destruct(sk);
+}
+
+static void mptcp_force_close(struct sock *sk)
+{
+ inet_sk_state_store(sk, TCP_CLOSE);
+ sk_common_release(sk);
+}
+
+static void subflow_ulp_fallback(struct sock *sk,
+ struct mptcp_subflow_context *old_ctx)
+{
+ struct inet_connection_sock *icsk = inet_csk(sk);
+
+ mptcp_subflow_tcp_fallback(sk, old_ctx);
+ icsk->icsk_ulp_ops = NULL;
+ rcu_assign_pointer(icsk->icsk_ulp_data, NULL);
+ tcp_sk(sk)->is_mptcp = 0;
+}
+
static struct sock *subflow_syn_recv_sock(const struct sock *sk,
struct sk_buff *skb,
struct request_sock *req,
struct tcp_options_received opt_rx;
bool fallback_is_fatal = false;
struct sock *new_msk = NULL;
+ bool fallback = false;
struct sock *child;
pr_debug("listener=%p, req=%p, conn=%p", listener, req, listener->conn);
+ opt_rx.mptcp.mp_capable = 0;
if (tcp_rsk(req)->is_mptcp == 0)
goto create_child;
goto create_msk;
}
- opt_rx.mptcp.mp_capable = 0;
mptcp_get_options(skb, &opt_rx);
- if (opt_rx.mptcp.mp_capable) {
- subflow_req->remote_key = opt_rx.mptcp.sndr_key;
- subflow_req->remote_key_valid = 1;
- } else {
- subflow_req->mp_capable = 0;
+ if (!opt_rx.mptcp.mp_capable) {
+ fallback = true;
goto create_child;
}
create_msk:
- new_msk = mptcp_sk_clone(listener->conn, req);
+ new_msk = mptcp_sk_clone(listener->conn, &opt_rx, req);
if (!new_msk)
- subflow_req->mp_capable = 0;
+ fallback = true;
} else if (subflow_req->mp_join) {
fallback_is_fatal = true;
opt_rx.mptcp.mp_join = 0;
if (child && *own_req) {
struct mptcp_subflow_context *ctx = mptcp_subflow_ctx(child);
- /* we have null ctx on TCP fallback, which is fatal on
- * MPJ handshake
+ /* we need to fallback on ctx allocation failure and on pre-reqs
+ * checking above. In the latter scenario we additionally need
+ * to reset the context to non MPTCP status.
*/
- if (!ctx) {
+ if (!ctx || fallback) {
if (fallback_is_fatal)
goto close_child;
+
+ if (ctx) {
+ subflow_ulp_fallback(child, ctx);
+ kfree_rcu(ctx, rcu);
+ }
goto out;
}
/* new mpc subflow takes ownership of the newly
* created mptcp socket
*/
- inet_sk_state_store(new_msk, TCP_ESTABLISHED);
+ new_msk->sk_destruct = mptcp_sock_destruct;
mptcp_pm_new_connection(mptcp_sk(new_msk), 1);
ctx->conn = new_msk;
new_msk = NULL;
+
+ /* with OoO packets we can reach here without ingress
+ * mpc option
+ */
+ ctx->remote_key = opt_rx.mptcp.sndr_key;
+ ctx->fully_established = opt_rx.mptcp.mp_capable;
+ ctx->can_ack = opt_rx.mptcp.mp_capable;
} else if (ctx->mp_join) {
struct mptcp_sock *owner;
out:
/* dispose of the left over mptcp master, if any */
if (unlikely(new_msk))
- sock_put(new_msk);
+ mptcp_force_close(new_msk);
+
+ /* check for expected invariant - should never trigger, just help
+ * catching eariler subtle bugs
+ */
+ WARN_ON_ONCE(*own_req && child && tcp_sk(child)->is_mptcp &&
+ (!mptcp_subflow_ctx(child) ||
+ !mptcp_subflow_ctx(child)->conn));
return child;
close_child:
kfree_rcu(ctx, rcu);
}
-static void subflow_ulp_fallback(struct sock *sk,
- struct mptcp_subflow_context *old_ctx)
-{
- struct inet_connection_sock *icsk = inet_csk(sk);
-
- mptcp_subflow_tcp_fallback(sk, old_ctx);
- icsk->icsk_ulp_ops = NULL;
- rcu_assign_pointer(icsk->icsk_ulp_data, NULL);
- tcp_sk(sk)->is_mptcp = 0;
-}
-
static void subflow_ulp_clone(const struct request_sock *req,
struct sock *newsk,
const gfp_t priority)
* is fully established only after we receive the remote key
*/
new_ctx->mp_capable = 1;
- new_ctx->fully_established = subflow_req->remote_key_valid;
- new_ctx->can_ack = subflow_req->remote_key_valid;
- new_ctx->remote_key = subflow_req->remote_key;
new_ctx->local_key = subflow_req->local_key;
new_ctx->token = subflow_req->token;
new_ctx->ssn_offset = subflow_req->ssn_offset;
down_write(&flow_table->flow_block_lock);
block_cb = flow_block_cb_lookup(block, cb, cb_priv);
- if (block_cb)
+ if (block_cb) {
list_del(&block_cb->list);
- else
+ flow_block_cb_free(block_cb);
+ } else {
WARN_ON(true);
+ }
up_write(&flow_table->flow_block_lock);
}
EXPORT_SYMBOL_GPL(nf_flow_table_offload_del_cb);
ret = nf_nat_register_fn(net, NFPROTO_IPV4, ops, nf_nat_ipv4_ops,
ARRAY_SIZE(nf_nat_ipv4_ops));
if (ret)
- nf_nat_ipv6_unregister_fn(net, ops);
-
+ nf_nat_unregister_fn(net, NFPROTO_IPV6, ops,
+ ARRAY_SIZE(nf_nat_ipv6_ops));
return ret;
}
EXPORT_SYMBOL_GPL(nf_nat_inet_register_fn);
Documentation/netlabel as well as the NetLabel SourceForge project
for configuration tools and additional documentation.
- * http://netlabel.sf.net
+ * https://github.com/netlabel/netlabel_tools
If you are unsure, say N.
/* refcount initialized at 1 */
spin_unlock_bh(&nr_node_list_lock);
+ nr_neigh_put(nr_neigh);
return 0;
}
nr_node_lock(nr_node);
struct hlist_head *head = &info->limits[i];
struct ovs_ct_limit *ct_limit;
- hlist_for_each_entry_rcu(ct_limit, head, hlist_node)
+ hlist_for_each_entry_rcu(ct_limit, head, hlist_node,
+ lockdep_ovsl_is_held())
kfree_rcu(ct_limit, rcu);
}
kfree(ovs_net->ct_limit_info->limits);
struct net *net;
LIST_HEAD(head);
- ovs_ct_exit(dnet);
ovs_lock();
+
+ ovs_ct_exit(dnet);
+
list_for_each_entry_safe(dp, dp_next, &ovs_net->dps, list_node)
__dp_destroy(dp);
if (q->skip_sock_check)
goto skip;
- if (!sk)
+ if (!sk || !sk_fullsock(sk))
return false;
if (!sock_flag(sk, SOCK_TXTIME))
struct sock_exterr_skb *serr;
struct sk_buff *clone;
ktime_t txtime = skb->tstamp;
+ struct sock *sk = skb->sk;
- if (!skb->sk || !(skb->sk->sk_txtime_report_errors))
+ if (!sk || !sk_fullsock(sk) || !(sk->sk_txtime_report_errors))
return;
clone = skb_clone(skb, GFP_ATOMIC);
serr->ee.ee_data = (txtime >> 32); /* high part of tstamp */
serr->ee.ee_info = txtime; /* low part of tstamp */
- if (sock_queue_err_skb(skb->sk, clone))
+ if (sock_queue_err_skb(sk, clone))
kfree_skb(clone);
}
struct sctp_chunk *retval;
__u32 ctsn;
- ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+ if (chunk && chunk->asoc)
+ ctsn = sctp_tsnmap_get_ctsn(&chunk->asoc->peer.tsn_map);
+ else
+ ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map);
+
shut.cum_tsn_ack = htonl(ctsn);
retval = sctp_make_control(asoc, SCTP_CID_SHUTDOWN, 0,
*/
sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
return sctp_sf_do_9_2_start_shutdown(net, ep, asoc,
- SCTP_ST_CHUNK(0), NULL,
+ SCTP_ST_CHUNK(0), repl,
commands);
} else {
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
* in the Cumulative TSN Ack field the last sequential TSN it
* has received from the peer.
*/
- reply = sctp_make_shutdown(asoc, NULL);
+ reply = sctp_make_shutdown(asoc, arg);
if (!reply)
goto nomem;
disposition = SCTP_DISPOSITION_CONSUME;
if (sctp_outq_is_empty(&asoc->outqueue)) {
disposition = sctp_sf_do_9_2_start_shutdown(net, ep, asoc, type,
- arg, commands);
+ NULL, commands);
}
return disposition;
{
struct cache_head *ch = NULL;
struct hlist_head *head = NULL;
- struct hlist_node *tmp = NULL;
int i = 0;
spin_lock(&detail->hash_lock);
dprintk("RPC: %d entries in %s cache\n", detail->entries, detail->name);
for (i = 0; i < detail->hash_size; i++) {
head = &detail->hash_table[i];
- hlist_for_each_entry_safe(ch, tmp, head, cache_list) {
+ while (!hlist_empty(head)) {
+ ch = hlist_entry(head->first, struct cache_head,
+ cache_list);
sunrpc_begin_cache_remove_entry(ch, detail);
spin_unlock(&detail->hash_lock);
sunrpc_end_cache_remove_entry(ch, detail);
if (!xprt)
goto out;
- /* release the receive skb before sending the reply */
- xprt->xpt_ops->xpo_release_rqst(rqstp);
-
/* calculate over-all length */
xb = &rqstp->rq_res;
xb->len = xb->head[0].iov_len +
dprintk("svc: svc_delete_xprt(%p)\n", xprt);
xprt->xpt_ops->xpo_detach(xprt);
+ if (xprt->xpt_bc_xprt)
+ xprt->xpt_bc_xprt->ops->close(xprt->xpt_bc_xprt);
spin_lock_bh(&serv->sv_lock);
list_del_init(&xprt->xpt_list);
unsigned int uninitialized_var(sent);
int err;
+ svc_release_udp_skb(rqstp);
+
svc_set_cmsg_data(rqstp, cmh);
err = xprt_sock_sendmsg(svsk->sk_sock, &msg, xdr, 0, 0, &sent);
unsigned int uninitialized_var(sent);
int err;
+ svc_release_skb(rqstp);
+
err = xprt_sock_sendmsg(svsk->sk_sock, &msg, xdr, 0, marker, &sent);
xdr_free_bvec(xdr);
if (err < 0 || sent != (xdr->len + sizeof(marker)))
xprt_rdma_bc_close(struct rpc_xprt *xprt)
{
dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
+
+ xprt_disconnect_done(xprt);
xprt->cwnd = RPC_CWNDSHIFT;
}
svc_rdma_recv_ctxt_destroy(rdma, ctxt);
}
+/**
+ * svc_rdma_release_rqst - Release transport-specific per-rqst resources
+ * @rqstp: svc_rqst being released
+ *
+ * Ensure that the recv_ctxt is released whether or not a Reply
+ * was sent. For example, the client could close the connection,
+ * or svc_process could drop an RPC, before the Reply is sent.
+ */
+void svc_rdma_release_rqst(struct svc_rqst *rqstp)
+{
+ struct svc_rdma_recv_ctxt *ctxt = rqstp->rq_xprt_ctxt;
+ struct svc_xprt *xprt = rqstp->rq_xprt;
+ struct svcxprt_rdma *rdma =
+ container_of(xprt, struct svcxprt_rdma, sc_xprt);
+
+ rqstp->rq_xprt_ctxt = NULL;
+ if (ctxt)
+ svc_rdma_recv_ctxt_put(rdma, ctxt);
+}
+
static int __svc_rdma_post_recv(struct svcxprt_rdma *rdma,
struct svc_rdma_recv_ctxt *ctxt)
{
__be32 *p;
int ret;
+ rqstp->rq_xprt_ctxt = NULL;
+
spin_lock(&rdma_xprt->sc_rq_dto_lock);
ctxt = svc_rdma_next_recv_ctxt(&rdma_xprt->sc_read_complete_q);
if (ctxt) {
if (atomic_sub_return(cc->cc_sqecount,
&rdma->sc_sq_avail) > 0) {
ret = ib_post_send(rdma->sc_qp, first_wr, &bad_wr);
- trace_svcrdma_post_rw(&cc->cc_cqe,
- cc->cc_sqecount, ret);
if (ret)
break;
return 0;
trace_svcrdma_sq_retry(rdma);
} while (1);
+ trace_svcrdma_sq_post_err(rdma, ret);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
/* If even one was posted, there will be a completion. */
}
svc_xprt_get(&rdma->sc_xprt);
+ trace_svcrdma_post_send(wr);
ret = ib_post_send(rdma->sc_qp, wr, NULL);
- trace_svcrdma_post_send(wr, ret);
- if (ret) {
- set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
- svc_xprt_put(&rdma->sc_xprt);
- wake_up(&rdma->sc_send_wait);
- }
- break;
+ if (ret)
+ break;
+ return 0;
}
+
+ trace_svcrdma_sq_post_err(rdma, ret);
+ set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_xprt_put(&rdma->sc_xprt);
+ wake_up(&rdma->sc_send_wait);
return ret;
}
ret = svc_rdma_send_reply_msg(rdma, sctxt, rctxt, rqstp);
if (ret < 0)
goto err1;
- ret = 0;
-
-out:
- rqstp->rq_xprt_ctxt = NULL;
- svc_rdma_recv_ctxt_put(rdma, rctxt);
- return ret;
+ return 0;
err2:
if (ret != -E2BIG && ret != -EINVAL)
ret = svc_rdma_send_error_msg(rdma, sctxt, rqstp);
if (ret < 0)
goto err1;
- ret = 0;
- goto out;
+ return 0;
err1:
svc_rdma_send_ctxt_put(rdma, sctxt);
err0:
trace_svcrdma_send_failed(rqstp, ret);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
- ret = -ENOTCONN;
- goto out;
+ return -ENOTCONN;
}
/**
struct sockaddr *sa, int salen,
int flags);
static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt);
-static void svc_rdma_release_rqst(struct svc_rqst *);
static void svc_rdma_detach(struct svc_xprt *xprt);
static void svc_rdma_free(struct svc_xprt *xprt);
static int svc_rdma_has_wspace(struct svc_xprt *xprt);
return NULL;
}
-static void svc_rdma_release_rqst(struct svc_rqst *rqstp)
-{
-}
-
/*
* When connected, an svc_xprt has at least two references:
*
static void bc_close(struct rpc_xprt *xprt)
{
+ xprt_disconnect_done(xprt);
}
/*
case -EBUSY:
this_cpu_inc(stats->stat[STAT_ASYNC]);
*skb = NULL;
+ tipc_aead_put(aead);
return rc;
default:
this_cpu_inc(stats->stat[STAT_NOK]);
n = tipc_node_find_by_id(net, ehdr->id);
}
tipc_crypto_rcv(net, (n) ? n->crypto_rx : NULL, &skb, b);
+ tipc_node_put(n);
if (!skb)
return;
/* Check/update node state before receiving */
if (unlikely(skb)) {
if (unlikely(skb_linearize(skb)))
- goto discard;
+ goto out_node_put;
tipc_node_write_lock(n);
if (tipc_node_check_state(n, skb, bearer_id, &xmitq)) {
if (le->link) {
if (!skb_queue_empty(&xmitq))
tipc_bearer_xmit(net, bearer_id, &xmitq, &le->maddr, n);
+out_node_put:
tipc_node_put(n);
discard:
kfree_skb(skb);
goto drop;
}
- if (!pskb_may_pull(skb, 1))
+ if (!pskb_may_pull(skb, 1)) {
+ x25_neigh_put(nb);
return 0;
+ }
switch (skb->data[0]) {
return -EINVAL;
return remap_vmalloc_range_partial(vma, vma->vm_start,
- mdev_state->memblk,
+ mdev_state->memblk, 0,
vma->vm_end - vma->vm_start);
}
endef
$(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE
- $(call if_changed_rule,dtc)
+ $(call if_changed_rule,dtc,yaml)
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
(?:kv|k|v)[czm]alloc(?:_node|_array)? |
kstrdup(?:_const)? |
kmemdup(?:_nul)?) |
- (?:\w+)?alloc_skb(?:ip_align)? |
+ (?:\w+)?alloc_skb(?:_ip_align)? |
# dev_alloc_skb/netdev_alloc_skb, et al
dma_alloc_coherent
)};
# If no prefix forced, use the default CONFIG_
CONFIG_="${CONFIG_-CONFIG_}"
+# We use an uncommon delimiter for sed substitutions
+SED_DELIM=$(echo -en "\001")
+
usage() {
cat >&2 <<EOL
Manipulate options in a .config file from the command line.
local infile="$3"
local tmpfile="$infile.swp"
- sed -e "s:$before:$after:" "$infile" >"$tmpfile"
+ sed -e "s$SED_DELIM$before$SED_DELIM$after$SED_DELIM" "$infile" >"$tmpfile"
# replace original file with the edited one
mv "$tmpfile" "$infile"
}
struct hda_codec *codec =
container_of(work, struct hda_codec, jackpoll_work.work);
- snd_hda_jack_set_dirty_all(codec);
- snd_hda_jack_poll_all(codec);
+ /* for non-polling trigger: we need nothing if already powered on */
+ if (!codec->jackpoll_interval && snd_hdac_is_power_on(&codec->core))
+ return;
+
+ /* the power-up/down sequence triggers the runtime resume */
+ snd_hda_power_up_pm(codec);
+ /* update jacks manually if polling is required, too */
+ if (codec->jackpoll_interval) {
+ snd_hda_jack_set_dirty_all(codec);
+ snd_hda_jack_poll_all(codec);
+ }
+ snd_hda_power_down_pm(codec);
if (!codec->jackpoll_interval)
return;
static int hda_codec_force_resume(struct device *dev)
{
struct hda_codec *codec = dev_to_hda_codec(dev);
- bool forced_resume = hda_codec_need_resume(codec);
int ret;
- /* The get/put pair below enforces the runtime resume even if the
- * device hasn't been used at suspend time. This trick is needed to
- * update the jack state change during the sleep.
- */
- if (forced_resume)
- pm_runtime_get_noresume(dev);
ret = pm_runtime_force_resume(dev);
- if (forced_resume)
- pm_runtime_put(dev);
+ /* schedule jackpoll work for jack detection update */
+ if (codec->jackpoll_interval ||
+ (pm_runtime_suspended(dev) && hda_codec_need_resume(codec)))
+ schedule_delayed_work(&codec->jackpoll_work,
+ codec->jackpoll_interval);
return ret;
}
if (status && from_rt) {
list_for_each_codec(codec, &chip->bus)
- if (status & (1 << codec->addr))
+ if (!codec->relaxed_resume &&
+ (status & (1 << codec->addr)))
schedule_delayed_work(&codec->jackpoll_work,
codec->jackpoll_interval);
}
static int azx_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
- struct hda_codec *codec;
struct azx *chip;
- bool forced_resume = false;
if (!azx_is_pm_ready(card))
return 0;
if (azx_acquire_irq(chip, 1) < 0)
return -EIO;
- /* check for the forced resume */
- list_for_each_codec(codec, &chip->bus) {
- if (hda_codec_need_resume(codec)) {
- forced_resume = true;
- break;
- }
- }
-
- if (forced_resume)
- pm_runtime_get_noresume(dev);
pm_runtime_force_resume(dev);
- if (forced_resume)
- pm_runtime_put(dev);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
trace_azx_resume(chip);
* should be ignored from the beginning.
*/
static const struct snd_pci_quirk driver_blacklist[] = {
- SND_PCI_QUIRK(0x1043, 0x874f, "ASUS ROG Zenith II / Strix", 0),
SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
{}
module_param(static_hdmi_pcm, bool, 0644);
MODULE_PARM_DESC(static_hdmi_pcm, "Don't restrict PCM parameters per ELD info");
+static bool enable_acomp = true;
+module_param(enable_acomp, bool, 0444);
+MODULE_PARM_DESC(enable_acomp, "Enable audio component binding (default=yes)");
+
struct hdmi_spec_per_cvt {
hda_nid_t cvt_nid;
int assigned;
{
struct hdmi_spec *spec = codec->spec;
+ if (!enable_acomp) {
+ codec_info(codec, "audio component disabled by module option\n");
+ return;
+ }
+
spec->port2pin = port2pin;
setup_drm_audio_ops(codec, ops);
if (!snd_hdac_acomp_init(&codec->bus->core, &spec->drm_audio_ops,
case 0x10ec0233:
case 0x10ec0235:
case 0x10ec0236:
+ case 0x10ec0245:
case 0x10ec0255:
case 0x10ec0256:
case 0x10ec0257:
{
if (!alc_subsystem_id(codec, ports)) {
struct alc_spec *spec = codec->spec;
- codec_dbg(codec,
- "realtek: Enable default setup for auto mode as fallback\n");
- spec->init_amp = ALC_INIT_DEFAULT;
+ if (spec->init_amp == ALC_INIT_UNDEFINED) {
+ codec_dbg(codec,
+ "realtek: Enable default setup for auto mode as fallback\n");
+ spec->init_amp = ALC_INIT_DEFAULT;
+ }
}
}
spec->gen.mixer_nid = 0;
break;
case 0x10ec0215:
+ case 0x10ec0245:
case 0x10ec0285:
case 0x10ec0289:
spec->codec_variant = ALC269_TYPE_ALC215;
HDA_CODEC_ENTRY(0x10ec0234, "ALC234", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0235, "ALC233", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0236, "ALC236", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0245, "ALC245", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0255, "ALC255", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0256, "ALC256", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0257, "ALC257", patch_alc269),
}
snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
- snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
- snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
- snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
+ snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+ snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+ snd_jack_set_key(pco_jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
ret = snd_soc_component_set_jack(component, &pco_jack, NULL);
if (ret) {
config SND_SOC_WM8900
tristate
+ depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8903
tristate "Wolfson Microelectronics WM8903 CODEC"
config SND_SOC_WM8988
tristate
+ depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8990
tristate
config SND_SOC_WM8995
tristate
+ depends on SND_SOC_I2C_AND_SPI
config SND_SOC_WM8996
tristate
hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
struct hdac_hdmi_cvt *cvt)
{
- struct hdac_hdmi_pcm *pcm = NULL;
+ struct hdac_hdmi_pcm *pcm;
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
if (pcm->cvt == cvt)
- break;
+ return pcm;
}
- return pcm;
+ return NULL;
}
static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
MADERA_ISRC4_FSH_SHIFT, 0xf,
MADERA_RATE_ENUM_SIZE,
madera_rate_text, madera_rate_val),
-
};
EXPORT_SYMBOL_GPL(madera_isrc_fsh);
MADERA_ISRC4_FSL_SHIFT, 0xf,
MADERA_RATE_ENUM_SIZE,
madera_rate_text, madera_rate_val),
-
};
EXPORT_SYMBOL_GPL(madera_isrc_fsl);
MADERA_ASYNC_RATE_ENUM_SIZE,
madera_rate_text + MADERA_SYNC_RATE_ENUM_SIZE,
madera_rate_val + MADERA_SYNC_RATE_ENUM_SIZE),
-
};
EXPORT_SYMBOL_GPL(madera_asrc1_rate);
MADERA_ASYNC_RATE_ENUM_SIZE,
madera_rate_text + MADERA_SYNC_RATE_ENUM_SIZE,
madera_rate_val + MADERA_SYNC_RATE_ENUM_SIZE),
-
};
EXPORT_SYMBOL_GPL(madera_asrc2_rate);
dev_err(&client->dev,
"Error %d initializing CHIP_CLK_CTRL\n", ret);
+ /* Mute everything to avoid pop from the following power-up */
+ ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+ SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+ if (ret) {
+ dev_err(&client->dev,
+ "Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+ goto disable_clk;
+ }
+
+ /*
+ * If VAG is powered-on (e.g. from previous boot), it would be disabled
+ * by the write to ANA_POWER in later steps of the probe code. This
+ * may create a loud pop even with all outputs muted. The proper way
+ * to circumvent this is disabling the bit first and waiting the proper
+ * cool-down time.
+ */
+ ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+ if (ret) {
+ dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+ goto disable_clk;
+ }
+ if (value & SGTL5000_VAG_POWERUP) {
+ ret = regmap_update_bits(sgtl5000->regmap,
+ SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP,
+ 0);
+ if (ret) {
+ dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+ goto disable_clk;
+ }
+
+ msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+ }
+
/* Follow section 2.2.1.1 of AN3663 */
ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
if (sgtl5000->num_supplies <= VDDD) {
/*
* SGTL5000_CHIP_ANA_CTRL
*/
+#define SGTL5000_CHIP_ANA_CTRL_DEFAULT 0x0133
#define SGTL5000_LINE_OUT_MUTE 0x0100
#define SGTL5000_HP_SEL_MASK 0x0040
#define SGTL5000_HP_SEL_SHIFT 6
priv->regmap = devm_regmap_init(dev, NULL, client,
priv->chip->regmap_config);
- if (IS_ERR(priv->regmap))
- return PTR_ERR(priv->regmap);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ goto disable_regs;
+ }
priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW);
if (IS_ERR(priv->pdn_gpio)) {
ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0);
if (ret)
- return ret;
+ goto disable_regs;
usleep_range(50000, 60000);
*/
ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0);
if (ret)
- return ret;
+ goto disable_regs;
}
- return devm_snd_soc_register_component(&client->dev,
+ ret = devm_snd_soc_register_component(&client->dev,
&priv->component_driver,
&tas571x_dai, 1);
+ if (ret)
+ goto disable_regs;
+
+ return ret;
+
+disable_regs:
+ regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies);
+ return ret;
}
static int tas571x_i2c_remove(struct i2c_client *client)
wm8960->is_stream_in_use[tx] = true;
- if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_ON &&
- !wm8960->is_stream_in_use[!tx])
+ if (!wm8960->is_stream_in_use[!tx])
return wm8960_configure_clocking(component);
return 0;
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}, {
/* COMP */
.num = 2,
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}, {
/* BOOST */
.num = 3,
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}, {
/* VISENSE */
.num = 4,
.min_ch = 1,
.max_ch = 1,
.simple_ch_prep_sm = true,
+ .read_only_wordlength = true,
}
};
}
};
-static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
- {
- .adr = 0x000210025D130800,
- .num_endpoints = 1,
- .endpoints = &single_endpoint,
- }
-};
-
static const struct snd_soc_acpi_adr_device rt1308_1_group1_adr[] = {
{
.adr = 0x000110025D130800,
}
};
-static const struct snd_soc_acpi_adr_device rt1308_2_adr[] = {
- {
- .adr = 0x000210025D130800,
- .num_endpoints = 1,
- .endpoints = &single_endpoint,
- }
-};
-
static const struct snd_soc_acpi_adr_device rt1308_1_group1_adr[] = {
{
.adr = 0x000110025D130800,
if (axg_card_cpu_is_tdm_iface(dai_link->cpus->of_node))
ret = axg_card_parse_tdm(card, np, index);
- else if (axg_card_cpu_is_codec(dai_link->cpus->of_node))
+ else if (axg_card_cpu_is_codec(dai_link->cpus->of_node)) {
dai_link->params = &codec_params;
+ dai_link->no_pcm = 0; /* link is not a DPCM BE */
+ }
return ret;
}
ret = gx_card_parse_i2s(card, np, index);
/* Or apply codec to codec params if necessary */
- else if (gx_card_cpu_identify(dai_link->cpus, "CODEC CTRL"))
+ else if (gx_card_cpu_identify(dai_link->cpus, "CODEC CTRL")) {
dai_link->params = &codec_params;
+ dai_link->no_pcm = 0; /* link is not a DPCM BE */
+ }
return ret;
}
card->dev = dev;
dev_set_drvdata(dev, card);
ret = qcom_snd_parse_of(card);
- if (ret) {
- dev_err(dev, "Error parsing OF data\n");
+ if (ret)
goto err;
- }
apq8096_add_be_ops(card);
ret = snd_soc_register_card(card);
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 1,
+ .channels_max = 8,
.rate_min = 8000,
.rate_max = 48000,
},
card->dev = dev;
dev_set_drvdata(dev, card);
ret = qcom_snd_parse_of(card);
- if (ret) {
- dev_err(dev, "Error parsing OF data\n");
+ if (ret)
goto parse_dt_fail;
- }
data->card = card;
snd_soc_card_set_drvdata(card, data);
}
EXPORT_SYMBOL_GPL(s3c_i2sv2_cleanup);
-#ifdef CONFIG_PM
-static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
-{
- struct s3c_i2sv2_info *i2s = to_info(dai);
- u32 iismod;
-
- if (dai->active) {
- i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
- i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
- i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
-
- /* some basic suspend checks */
-
- iismod = readl(i2s->regs + S3C2412_IISMOD);
-
- if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
- pr_warn("%s: RXDMA active?\n", __func__);
-
- if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
- pr_warn("%s: TXDMA active?\n", __func__);
-
- if (iismod & S3C2412_IISCON_IIS_ACTIVE)
- pr_warn("%s: IIS active\n", __func__);
- }
-
- return 0;
-}
-
-static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
-{
- struct s3c_i2sv2_info *i2s = to_info(dai);
-
- pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
- dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
-
- if (dai->active) {
- writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
- writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
- writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
-
- writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
- i2s->regs + S3C2412_IISFIC);
-
- ndelay(250);
- writel(0x0, i2s->regs + S3C2412_IISFIC);
- }
-
- return 0;
-}
-#else
-#define s3c2412_i2s_suspend NULL
-#define s3c2412_i2s_resume NULL
-#endif
-
int s3c_i2sv2_register_component(struct device *dev, int id,
const struct snd_soc_component_driver *cmp_drv,
struct snd_soc_dai_driver *dai_drv)
if (!ops->delay)
ops->delay = s3c2412_i2s_delay;
- dai_drv->suspend = s3c2412_i2s_suspend;
- dai_drv->resume = s3c2412_i2s_resume;
-
return devm_snd_soc_register_component(dev, cmp_drv, dai_drv, 1);
}
EXPORT_SYMBOL_GPL(s3c_i2sv2_register_component);
return 0;
}
+#ifdef CONFIG_PM
+static int s3c2412_i2s_suspend(struct snd_soc_component *component)
+{
+ struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+ u32 iismod;
+
+ if (component->active) {
+ i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+ i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+ i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+
+ /* some basic suspend checks */
+
+ iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+ if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+ pr_warn("%s: RXDMA active?\n", __func__);
+
+ if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+ pr_warn("%s: TXDMA active?\n", __func__);
+
+ if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+ pr_warn("%s: IIS active\n", __func__);
+ }
+
+ return 0;
+}
+
+static int s3c2412_i2s_resume(struct snd_soc_component *component)
+{
+ struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+
+ pr_info("component_active %d, IISMOD %08x, IISCON %08x\n",
+ component->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+
+ if (component->active) {
+ writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+ writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+ writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+
+ writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+ i2s->regs + S3C2412_IISFIC);
+
+ ndelay(250);
+ writel(0x0, i2s->regs + S3C2412_IISFIC);
+ }
+
+ return 0;
+}
+#else
+#define s3c2412_i2s_suspend NULL
+#define s3c2412_i2s_resume NULL
+#endif
+
#define S3C2412_I2S_RATES \
(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
static const struct snd_soc_component_driver s3c2412_i2s_component = {
.name = "s3c2412-i2s",
+ .suspend = s3c2412_i2s_suspend,
+ .resume = s3c2412_i2s_resume,
};
static int s3c2412_iis_dev_probe(struct platform_device *pdev)
* Capture: It might not receave data. Do nothing
*/
if (rsnd_io_is_play(io)) {
- rsnd_mod_write(mod, SSICR, cr | EN);
+ rsnd_mod_write(mod, SSICR, cr | ssi->cr_en);
rsnd_ssi_status_check(mod, DIRQ);
}
+ /* In multi-SSI mode, stop is performed by setting ssi0129 in
+ * SSI_CONTROL to 0 (in rsnd_ssio_stop_gen2). Do nothing here.
+ */
+ if (rsnd_ssi_multi_slaves_runtime(io))
+ return 0;
+
/*
* disable SSI,
* and, wait idle state
if (!rsnd_rdai_is_clk_master(rdai))
return;
+ if (rsnd_ssi_is_multi_slave(mod, io))
+ return;
+
switch (rsnd_mod_id(mod)) {
case 1:
case 2:
i;
for_each_rsnd_mod_array(i, pos, io, rsnd_ssi_array) {
- shift = (i * 4) + 16;
+ shift = (i * 4) + 20;
val = (val & ~(0xF << shift)) |
rsnd_mod_id(pos) << shift;
}
{
int ret = 0;
- if (!dai->started[substream->stream] &&
- dai->driver->ops->startup)
+ if (dai->driver->ops->startup)
ret = dai->driver->ops->startup(substream, dai);
- if (ret == 0)
- dai->started[substream->stream] = 1;
-
return ret;
}
void snd_soc_dai_shutdown(struct snd_soc_dai *dai,
struct snd_pcm_substream *substream)
{
- if (dai->started[substream->stream] &&
- dai->driver->ops->shutdown)
+ if (dai->driver->ops->shutdown)
dai->driver->ops->shutdown(substream, dai);
-
- dai->started[substream->stream] = 0;
}
int snd_soc_dai_prepare(struct snd_soc_dai *dai,
memset(&template, 0, sizeof(template));
template.reg = e->reg;
- template.mask = e->mask << e->shift_l;
+ template.mask = e->mask;
template.shift = e->shift_l;
template.off_val = snd_soc_enum_item_to_val(e, 0);
template.on_val = template.off_val;
if (data->value == value)
return false;
- if (data->widget)
- data->widget->on_val = value;
+ if (data->widget) {
+ switch (dapm_kcontrol_get_wlist(kcontrol)->widgets[0]->id) {
+ case snd_soc_dapm_switch:
+ case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
+ data->widget->on_val = value & data->widget->mask;
+ break;
+ case snd_soc_dapm_demux:
+ case snd_soc_dapm_mux:
+ data->widget->on_val = value >> data->widget->shift;
+ break;
+ default:
+ data->widget->on_val = value;
+ break;
+ }
+ }
data->value = value;
w = snd_soc_dapm_new_control_unlocked(&card->dapm, &template);
if (IS_ERR(w)) {
ret = PTR_ERR(w);
+ dev_err(rtd->dev, "ASoC: Failed to create %s widget: %d\n",
+ link_name, ret);
goto outfree_kcontrol_news;
}
return 0;
}
-static void dapm_add_valid_dai_widget(struct snd_soc_card *card,
- struct snd_soc_pcm_runtime *rtd,
- struct snd_soc_dai *codec_dai,
- struct snd_soc_dai *cpu_dai)
+static void dapm_connect_dai_routes(struct snd_soc_dapm_context *dapm,
+ struct snd_soc_dai *src_dai,
+ struct snd_soc_dapm_widget *src,
+ struct snd_soc_dapm_widget *dai,
+ struct snd_soc_dai *sink_dai,
+ struct snd_soc_dapm_widget *sink)
{
- struct snd_soc_dapm_widget *playback = NULL, *capture = NULL;
- struct snd_soc_dapm_widget *codec, *playback_cpu, *capture_cpu;
+ dev_dbg(dapm->dev, "connected DAI link %s:%s -> %s:%s\n",
+ src_dai->component->name, src->name,
+ sink_dai->component->name, sink->name);
+
+ if (dai) {
+ snd_soc_dapm_add_path(dapm, src, dai, NULL, NULL);
+ src = dai;
+ }
+
+ snd_soc_dapm_add_path(dapm, src, sink, NULL, NULL);
+}
+
+static void dapm_connect_dai_pair(struct snd_soc_card *card,
+ struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_dai *codec_dai,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct snd_soc_dai_link *dai_link = rtd->dai_link;
+ struct snd_soc_dapm_widget *dai, *codec, *playback_cpu, *capture_cpu;
struct snd_pcm_substream *substream;
struct snd_pcm_str *streams = rtd->pcm->streams;
- if (rtd->dai_link->params) {
+ if (dai_link->params) {
playback_cpu = cpu_dai->capture_widget;
capture_cpu = cpu_dai->playback_widget;
} else {
- playback = cpu_dai->playback_widget;
- capture = cpu_dai->capture_widget;
- playback_cpu = playback;
- capture_cpu = capture;
+ playback_cpu = cpu_dai->playback_widget;
+ capture_cpu = cpu_dai->capture_widget;
}
/* connect BE DAI playback if widgets are valid */
codec = codec_dai->playback_widget;
if (playback_cpu && codec) {
- if (!playback) {
+ if (dai_link->params && !dai_link->playback_widget) {
substream = streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
- playback = snd_soc_dapm_new_dai(card, substream,
- "playback");
- if (IS_ERR(playback)) {
- dev_err(rtd->dev,
- "ASoC: Failed to create DAI %s: %ld\n",
- codec_dai->name,
- PTR_ERR(playback));
+ dai = snd_soc_dapm_new_dai(card, substream, "playback");
+ if (IS_ERR(dai))
goto capture;
- }
-
- snd_soc_dapm_add_path(&card->dapm, playback_cpu,
- playback, NULL, NULL);
+ dai_link->playback_widget = dai;
}
- dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
- cpu_dai->component->name, playback_cpu->name,
- codec_dai->component->name, codec->name);
-
- snd_soc_dapm_add_path(&card->dapm, playback, codec,
- NULL, NULL);
+ dapm_connect_dai_routes(&card->dapm, cpu_dai, playback_cpu,
+ dai_link->playback_widget,
+ codec_dai, codec);
}
capture:
codec = codec_dai->capture_widget;
if (codec && capture_cpu) {
- if (!capture) {
+ if (dai_link->params && !dai_link->capture_widget) {
substream = streams[SNDRV_PCM_STREAM_CAPTURE].substream;
- capture = snd_soc_dapm_new_dai(card, substream,
- "capture");
- if (IS_ERR(capture)) {
- dev_err(rtd->dev,
- "ASoC: Failed to create DAI %s: %ld\n",
- codec_dai->name,
- PTR_ERR(capture));
+ dai = snd_soc_dapm_new_dai(card, substream, "capture");
+ if (IS_ERR(dai))
return;
- }
-
- snd_soc_dapm_add_path(&card->dapm, capture,
- capture_cpu, NULL, NULL);
+ dai_link->capture_widget = dai;
}
- dev_dbg(rtd->dev, "connected DAI link %s:%s -> %s:%s\n",
- codec_dai->component->name, codec->name,
- cpu_dai->component->name, capture_cpu->name);
-
- snd_soc_dapm_add_path(&card->dapm, codec, capture,
- NULL, NULL);
- }
-}
-
-static void dapm_connect_dai_link_widgets(struct snd_soc_card *card,
- struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_dai *codec_dai;
- int i;
-
- if (rtd->num_cpus == 1) {
- for_each_rtd_codec_dais(rtd, i, codec_dai)
- dapm_add_valid_dai_widget(card, rtd, codec_dai,
- rtd->cpu_dais[0]);
- } else if (rtd->num_codecs == rtd->num_cpus) {
- for_each_rtd_codec_dais(rtd, i, codec_dai)
- dapm_add_valid_dai_widget(card, rtd, codec_dai,
- rtd->cpu_dais[i]);
- } else {
- dev_err(card->dev,
- "N cpus to M codecs link is not supported yet\n");
+ dapm_connect_dai_routes(&card->dapm, codec_dai, codec,
+ dai_link->capture_widget,
+ cpu_dai, capture_cpu);
}
-
}
static void soc_dapm_dai_stream_event(struct snd_soc_dai *dai, int stream,
void snd_soc_dapm_connect_dai_link_widgets(struct snd_soc_card *card)
{
struct snd_soc_pcm_runtime *rtd;
+ struct snd_soc_dai *codec_dai;
+ int i;
/* for each BE DAI link... */
for_each_card_rtds(card, rtd) {
if (rtd->dai_link->dynamic)
continue;
- dapm_connect_dai_link_widgets(card, rtd);
+ if (rtd->num_cpus == 1) {
+ for_each_rtd_codec_dais(rtd, i, codec_dai)
+ dapm_connect_dai_pair(card, rtd, codec_dai,
+ rtd->cpu_dais[0]);
+ } else if (rtd->num_codecs == rtd->num_cpus) {
+ for_each_rtd_codec_dais(rtd, i, codec_dai)
+ dapm_connect_dai_pair(card, rtd, codec_dai,
+ rtd->cpu_dais[i]);
+ } else {
+ dev_err(card->dev,
+ "N cpus to M codecs link is not supported yet\n");
+ }
}
}
int i;
if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
- playback = rtd->dai_link->dpcm_playback;
- capture = rtd->dai_link->dpcm_capture;
+ cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ if (rtd->num_cpus > 1) {
+ dev_err(rtd->dev,
+ "DPCM doesn't support Multi CPU yet\n");
+ return -EINVAL;
+ }
+
+ playback = rtd->dai_link->dpcm_playback &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK);
+ capture = rtd->dai_link->dpcm_capture &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE);
} else {
/* Adapt stream for codec2codec links */
int cpu_capture = rtd->dai_link->params ?
}
/* create any TLV data */
- soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+ err = soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+ if (err < 0) {
+ dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+ mc->hdr.name);
+ kfree(sm);
+ continue;
+ }
/* pass control to driver for optional further init */
err = soc_tplg_init_kcontrol(tplg, &kc,
struct snd_soc_tplg_hdr *hdr)
{
struct snd_soc_tplg_ctl_hdr *control_hdr;
+ int ret;
int i;
if (tplg->pass != SOC_TPLG_PASS_MIXER) {
case SND_SOC_TPLG_CTL_RANGE:
case SND_SOC_TPLG_DAPM_CTL_VOLSW:
case SND_SOC_TPLG_DAPM_CTL_PIN:
- soc_tplg_dmixer_create(tplg, 1,
- le32_to_cpu(hdr->payload_size));
+ ret = soc_tplg_dmixer_create(tplg, 1,
+ le32_to_cpu(hdr->payload_size));
break;
case SND_SOC_TPLG_CTL_ENUM:
case SND_SOC_TPLG_CTL_ENUM_VALUE:
case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE:
case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT:
case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE:
- soc_tplg_denum_create(tplg, 1,
- le32_to_cpu(hdr->payload_size));
+ ret = soc_tplg_denum_create(tplg, 1,
+ le32_to_cpu(hdr->payload_size));
break;
case SND_SOC_TPLG_CTL_BYTES:
- soc_tplg_dbytes_create(tplg, 1,
- le32_to_cpu(hdr->payload_size));
+ ret = soc_tplg_dbytes_create(tplg, 1,
+ le32_to_cpu(hdr->payload_size));
break;
default:
soc_bind_err(tplg, control_hdr, i);
return -EINVAL;
}
+ if (ret < 0) {
+ dev_err(tplg->dev, "ASoC: invalid control\n");
+ return ret;
+ }
+
}
return 0;
routes[i]->dobj.index = tplg->index;
list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list);
- soc_tplg_add_route(tplg, routes[i]);
+ ret = soc_tplg_add_route(tplg, routes[i]);
+ if (ret < 0)
+ break;
/* add route, but keep going if some fail */
snd_soc_dapm_add_routes(dapm, routes[i], 1);
}
/* create any TLV data */
- soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+ err = soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+ if (err < 0) {
+ dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+ mc->hdr.name);
+ kfree(sm);
+ continue;
+ }
/* pass control to driver for optional further init */
err = soc_tplg_init_kcontrol(tplg, &kc[i],
return 0;
}
-static void set_stream_info(struct snd_soc_pcm_stream *stream,
+static int set_stream_info(struct snd_soc_pcm_stream *stream,
struct snd_soc_tplg_stream_caps *caps)
{
stream->stream_name = kstrdup(caps->name, GFP_KERNEL);
+ if (!stream->stream_name)
+ return -ENOMEM;
+
stream->channels_min = le32_to_cpu(caps->channels_min);
stream->channels_max = le32_to_cpu(caps->channels_max);
stream->rates = le32_to_cpu(caps->rates);
stream->rate_max = le32_to_cpu(caps->rate_max);
stream->formats = le64_to_cpu(caps->formats);
stream->sig_bits = le32_to_cpu(caps->sig_bits);
+
+ return 0;
}
static void set_dai_flags(struct snd_soc_dai_driver *dai_drv,
if (dai_drv == NULL)
return -ENOMEM;
- if (strlen(pcm->dai_name))
+ if (strlen(pcm->dai_name)) {
dai_drv->name = kstrdup(pcm->dai_name, GFP_KERNEL);
+ if (!dai_drv->name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ }
dai_drv->id = le32_to_cpu(pcm->dai_id);
if (pcm->playback) {
stream = &dai_drv->playback;
caps = &pcm->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (pcm->capture) {
stream = &dai_drv->capture;
caps = &pcm->caps[SND_SOC_TPLG_STREAM_CAPTURE];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (pcm->compress)
ret = soc_tplg_dai_load(tplg, dai_drv, pcm, NULL);
if (ret < 0) {
dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
- kfree(dai_drv->playback.stream_name);
- kfree(dai_drv->capture.stream_name);
- kfree(dai_drv->name);
- kfree(dai_drv);
- return ret;
+ goto err;
}
dai_drv->dobj.index = tplg->index;
return ret;
}
+ return 0;
+
+err:
+ kfree(dai_drv->playback.stream_name);
+ kfree(dai_drv->capture.stream_name);
+ kfree(dai_drv->name);
+ kfree(dai_drv);
+
return ret;
}
if (strlen(pcm->pcm_name)) {
link->name = kstrdup(pcm->pcm_name, GFP_KERNEL);
link->stream_name = kstrdup(pcm->pcm_name, GFP_KERNEL);
+ if (!link->name || !link->stream_name) {
+ ret = -ENOMEM;
+ goto err;
+ }
}
link->id = le32_to_cpu(pcm->pcm_id);
- if (strlen(pcm->dai_name))
+ if (strlen(pcm->dai_name)) {
link->cpus->dai_name = kstrdup(pcm->dai_name, GFP_KERNEL);
+ if (!link->cpus->dai_name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ }
link->codecs->name = "snd-soc-dummy";
link->codecs->dai_name = "snd-soc-dummy-dai";
_pcm = pcm;
} else {
abi_match = false;
- pcm_new_ver(tplg, pcm, &_pcm);
+ ret = pcm_new_ver(tplg, pcm, &_pcm);
+ if (ret < 0)
+ return ret;
}
/* create the FE DAIs and DAI links */
if (d->playback) {
stream = &dai_drv->playback;
caps = &d->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (d->capture) {
stream = &dai_drv->capture;
caps = &d->caps[SND_SOC_TPLG_STREAM_CAPTURE];
- set_stream_info(stream, caps);
+ ret = set_stream_info(stream, caps);
+ if (ret < 0)
+ goto err;
}
if (d->flag_mask)
ret = soc_tplg_dai_load(tplg, dai_drv, NULL, dai);
if (ret < 0) {
dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
- return ret;
+ goto err;
}
return 0;
+
+err:
+ kfree(dai_drv->playback.stream_name);
+ kfree(dai_drv->capture.stream_name);
+ return ret;
}
/* load physical DAI elements */
{
struct snd_soc_tplg_dai *dai;
int count;
- int i;
+ int i, ret;
count = le32_to_cpu(hdr->count);
return -EINVAL;
}
- soc_tplg_dai_config(tplg, dai);
+ ret = soc_tplg_dai_config(tplg, dai);
+ if (ret < 0) {
+ dev_err(tplg->dev, "ASoC: failed to configure DAI\n");
+ return ret;
+ }
+
tplg->pos += (sizeof(*dai) + le32_to_cpu(dai->priv.size));
}
}
/* big endian firmware objects not supported atm */
- if (hdr->magic == SOC_TPLG_MAGIC_BIG_ENDIAN) {
+ if (le32_to_cpu(hdr->magic) == SOC_TPLG_MAGIC_BIG_ENDIAN) {
dev_err(tplg->dev,
"ASoC: pass %d big endian not supported header got %x at offset 0x%lx size 0x%zx.\n",
tplg->pass, hdr->magic,
static struct snd_soc_dai_driver bdw_dai[] = {
{
.name = "ssp0-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp1-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
};
static struct snd_soc_dai_driver byt_dai[] = {
{
.name = "ssp0-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp1-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp2-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ }
},
{
.name = "ssp3-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp4-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
{
.name = "ssp5-port",
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 8,
+ },
},
};
cr1 = SAI_XCR1_DS_SET(SAI_DATASIZE_32);
break;
default:
- dev_err(cpu_dai->dev, "Data format not supported");
+ dev_err(cpu_dai->dev, "Data format not supported\n");
return -EINVAL;
}
return ret;
}
+ if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+ conf = &stm32_sai_pcm_config_spdif;
+
ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
if (ret) {
if (ret != -EPROBE_DEFER)
ret = snd_soc_register_component(&pdev->dev, &stm32_component,
&sai->cpu_dai_drv, 1);
- if (ret) {
+ if (ret)
snd_dmaengine_pcm_unregister(&pdev->dev);
- return ret;
- }
-
- if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
- conf = &stm32_sai_pcm_config_spdif;
- return 0;
+ return ret;
}
static int stm32_sai_sub_remove(struct platform_device *pdev)
return false;
}
+/*
+ * Many Focusrite devices supports a limited set of sampling rates per
+ * altsetting. Maximum rate is exposed in the last 4 bytes of Format Type
+ * descriptor which has a non-standard bLength = 10.
+ */
+static bool focusrite_valid_sample_rate(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ unsigned int rate)
+{
+ struct usb_interface *iface;
+ struct usb_host_interface *alts;
+ unsigned char *fmt;
+ unsigned int max_rate;
+
+ iface = usb_ifnum_to_if(chip->dev, fp->iface);
+ if (!iface)
+ return true;
+
+ alts = &iface->altsetting[fp->altset_idx];
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen,
+ NULL, UAC_FORMAT_TYPE);
+ if (!fmt)
+ return true;
+
+ if (fmt[0] == 10) { /* bLength */
+ max_rate = combine_quad(&fmt[6]);
+
+ /* Validate max rate */
+ if (max_rate != 48000 &&
+ max_rate != 96000 &&
+ max_rate != 192000 &&
+ max_rate != 384000) {
+
+ usb_audio_info(chip,
+ "%u:%d : unexpected max rate: %u\n",
+ fp->iface, fp->altsetting, max_rate);
+
+ return true;
+ }
+
+ return rate <= max_rate;
+ }
+
+ return true;
+}
+
/*
* Helper function to walk the array of sample rate triplets reported by
* the device. The problem is that we need to parse whole array first to
!s1810c_valid_sample_rate(fp, rate))
goto skip_rate;
+ /* Filter out invalid rates on Focusrite devices */
+ if (USB_ID_VENDOR(chip->usb_id) == 0x1235 &&
+ !focusrite_valid_sample_rate(chip, fp, rate))
+ goto skip_rate;
+
if (fp->rate_table)
fp->rate_table[nr_rates] = rate;
if (!fp->rate_min || rate < fp->rate_min)
{
struct snd_kcontrol *kctl;
struct usb_mixer_elem_info *cval;
+ const struct usbmix_name_map *map;
- if (check_ignored_ctl(find_map(imap, term->id, 0)))
+ map = find_map(imap, term->id, 0);
+ if (check_ignored_ctl(map))
return;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
usb_mixer_elem_info_free(cval);
return;
}
- get_connector_control_name(mixer, term, is_input, kctl->id.name,
- sizeof(kctl->id.name));
+
+ if (check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name)))
+ strlcat(kctl->id.name, " Jack", sizeof(kctl->id.name));
+ else
+ get_connector_control_name(mixer, term, is_input, kctl->id.name,
+ sizeof(kctl->id.name));
kctl->private_free = snd_usb_mixer_elem_free;
snd_usb_mixer_add_control(&cval->head, kctl);
}
if (map->id == state.chip->usb_id) {
state.map = map->map;
state.selector_map = map->selector_map;
+ mixer->connector_map = map->connector_map;
mixer->ignore_ctl_error |= map->ignore_ctl_error;
break;
}
return 0;
}
+static int delegate_notify(struct usb_mixer_interface *mixer, int unitid,
+ u8 *control, u8 *channel)
+{
+ const struct usbmix_connector_map *map = mixer->connector_map;
+
+ if (!map)
+ return unitid;
+
+ for (; map->id; map++) {
+ if (map->id == unitid) {
+ if (control && map->control)
+ *control = map->control;
+ if (channel && map->channel)
+ *channel = map->channel;
+ return map->delegated_id;
+ }
+ }
+ return unitid;
+}
+
void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid)
{
struct usb_mixer_elem_list *list;
+ unitid = delegate_notify(mixer, unitid, NULL, NULL);
+
for_each_mixer_elem(list, mixer, unitid) {
struct usb_mixer_elem_info *info =
mixer_elem_list_to_info(list);
return;
}
+ unitid = delegate_notify(mixer, unitid, &control, &channel);
+
for_each_mixer_elem(list, mixer, unitid)
count++;
struct media_mixer_ctl;
+struct usbmix_connector_map {
+ u8 id;
+ u8 delegated_id;
+ u8 control;
+ u8 channel;
+};
+
struct usb_mixer_interface {
struct snd_usb_audio *chip;
struct usb_host_interface *hostif;
/* the usb audio specification version this interface complies to */
int protocol;
+ /* optional connector delegation map */
+ const struct usbmix_connector_map *connector_map;
+
/* Sound Blaster remote control stuff */
const struct rc_config *rc_cfg;
u32 rc_code;
u32 id;
const struct usbmix_name_map *map;
const struct usbmix_selector_map *selector_map;
+ const struct usbmix_connector_map *connector_map;
int ignore_ctl_error;
};
{}
};
+/* TRX40 mobos with Realtek ALC1220-VB */
+static const struct usbmix_name_map trx40_mobo_map[] = {
+ { 18, NULL }, /* OT, IEC958 - broken response, disabled */
+ { 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */
+ { 16, "Speaker" }, /* OT */
+ { 22, "Speaker Playback" }, /* FU */
+ { 7, "Line" }, /* IT */
+ { 19, "Line Capture" }, /* FU */
+ { 17, "Front Headphone" }, /* OT */
+ { 23, "Front Headphone Playback" }, /* FU */
+ { 8, "Mic" }, /* IT */
+ { 20, "Mic Capture" }, /* FU */
+ { 9, "Front Mic" }, /* IT */
+ { 21, "Front Mic Capture" }, /* FU */
+ { 24, "IEC958 Playback" }, /* FU */
+ {}
+};
+
+static const struct usbmix_connector_map trx40_mobo_connector_map[] = {
+ { 10, 16 }, /* (Back) Speaker */
+ { 11, 17 }, /* Front Headphone */
+ { 13, 7 }, /* Line */
+ { 14, 8 }, /* Mic */
+ { 15, 9 }, /* Front Mic */
+ {}
+};
+
/*
* Control map entries
*/
},
{ /* Gigabyte TRX40 Aorus Pro WiFi */
.id = USB_ID(0x0414, 0xa002),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ /* ASUS ROG Zenith II */
.id = USB_ID(0x0b05, 0x1916),
},
{ /* MSI TRX40 Creator */
.id = USB_ID(0x0db0, 0x0d64),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ /* MSI TRX40 */
.id = USB_ID(0x0db0, 0x543d),
- .map = asus_rog_map,
+ .map = trx40_mobo_map,
+ .connector_map = trx40_mobo_connector_map,
},
{ 0 } /* terminator */
};
/* use known values for that card: interface#1 altsetting#1 */
iface = usb_ifnum_to_if(chip->dev, 1);
- if (!iface || iface->num_altsetting < 2)
- return -EINVAL;
+ if (!iface || iface->num_altsetting < 2) {
+ err = -EINVAL;
+ goto end;
+ }
alts = &iface->altsetting[1];
- if (get_iface_desc(alts)->bNumEndpoints < 1)
- return -EINVAL;
+ if (get_iface_desc(alts)->bNumEndpoints < 1) {
+ err = -EINVAL;
+ goto end;
+ }
ep = get_endpoint(alts, 0)->bEndpointAddress;
err = snd_usb_ctl_msg(chip->dev,
.type = QUIRK_MIDI_NOVATION
}
},
-{
- /*
- * Focusrite Scarlett Solo 2nd generation
- * Reports that playback should use Synch: Synchronous
- * while still providing a feedback endpoint. Synchronous causes
- * snapping on some sample rates.
- * Force it to use Synch: Asynchronous.
- */
- USB_DEVICE(0x1235, 0x8205),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .ifnum = QUIRK_ANY_INTERFACE,
- .type = QUIRK_COMPOSITE,
- .data = (const struct snd_usb_audio_quirk[]) {
- {
- .ifnum = 1,
- .type = QUIRK_AUDIO_FIXED_ENDPOINT,
- .data = & (const struct audioformat) {
- .formats = SNDRV_PCM_FMTBIT_S32_LE,
- .channels = 2,
- .iface = 1,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = 0,
- .endpoint = 0x01,
- .ep_attr = USB_ENDPOINT_XFER_ISOC |
- USB_ENDPOINT_SYNC_ASYNC,
- .protocol = UAC_VERSION_2,
- .rates = SNDRV_PCM_RATE_44100 |
- SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_88200 |
- SNDRV_PCM_RATE_96000 |
- SNDRV_PCM_RATE_176400 |
- SNDRV_PCM_RATE_192000,
- .rate_min = 44100,
- .rate_max = 192000,
- .nr_rates = 6,
- .rate_table = (unsigned int[]) {
- 44100, 48000, 88200,
- 96000, 176400, 192000
- },
- .clock = 41
- }
- },
- {
- .ifnum = 2,
- .type = QUIRK_AUDIO_FIXED_ENDPOINT,
- .data = & (const struct audioformat) {
- .formats = SNDRV_PCM_FMTBIT_S32_LE,
- .channels = 2,
- .iface = 2,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = 0,
- .endpoint = 0x82,
- .ep_attr = USB_ENDPOINT_XFER_ISOC |
- USB_ENDPOINT_SYNC_ASYNC |
- USB_ENDPOINT_USAGE_IMPLICIT_FB,
- .protocol = UAC_VERSION_2,
- .rates = SNDRV_PCM_RATE_44100 |
- SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_88200 |
- SNDRV_PCM_RATE_96000 |
- SNDRV_PCM_RATE_176400 |
- SNDRV_PCM_RATE_192000,
- .rate_min = 44100,
- .rate_max = 192000,
- .nr_rates = 6,
- .rate_table = (unsigned int[]) {
- 44100, 48000, 88200,
- 96000, 176400, 192000
- },
- .clock = 41
- }
- },
- {
- .ifnum = 3,
- .type = QUIRK_IGNORE_INTERFACE
- },
- {
- .ifnum = -1
- }
- }
- }
-},
/* Access Music devices */
{
}
},
+#define ALC1220_VB_DESKTOP(vend, prod) { \
+ USB_DEVICE(vend, prod), \
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \
+ .vendor_name = "Realtek", \
+ .product_name = "ALC1220-VB-DT", \
+ .profile_name = "Realtek-ALC1220-VB-Desktop", \
+ .ifnum = QUIRK_NO_INTERFACE \
+ } \
+}
+ALC1220_VB_DESKTOP(0x0414, 0xa002), /* Gigabyte TRX40 Aorus Pro WiFi */
+ALC1220_VB_DESKTOP(0x0db0, 0x0d64), /* MSI TRX40 Creator */
+ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */
+#undef ALC1220_VB_DESKTOP
+
#undef USB_DEVICE_VENDOR_SPEC
*/
fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
break;
+ case USB_ID(0x1235, 0x8200): /* Focusrite Scarlett 2i4 2nd gen */
+ case USB_ID(0x1235, 0x8202): /* Focusrite Scarlett 2i2 2nd gen */
+ case USB_ID(0x1235, 0x8205): /* Focusrite Scarlett Solo 2nd gen */
+ /*
+ * Reports that playback should use Synch: Synchronous
+ * while still providing a feedback endpoint.
+ * Synchronous causes snapping on some sample rates.
+ * Force it to use Synch: Asynchronous.
+ */
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
+ fp->ep_attr |= USB_ENDPOINT_SYNC_ASYNC;
+ }
+ break;
}
}
us->submitted = 2*NOOF_SETRATE_URBS;
for (i = 0; i < NOOF_SETRATE_URBS; ++i) {
struct urb *urb = us->urb[i];
+ if (!urb)
+ continue;
if (urb->status) {
if (!err)
err = -ENODEV;
static int do_register(int argc, char **argv)
{
+ struct bpf_object_load_attr load_attr = {};
const struct bpf_map_def *def;
struct bpf_map_info info = {};
__u32 info_len = sizeof(info);
set_max_rlimit();
- if (bpf_object__load(obj)) {
+ load_attr.obj = obj;
+ if (verifier_logs)
+ /* log_level1 + log_level2 + stats, but not stable UAPI */
+ load_attr.log_level = 1 + 2 + 4;
+
+ if (bpf_object__load_xattr(&load_attr)) {
bpf_object__close(obj);
return -1;
}
LIBBPF_SRC := $(abspath ../../lib/bpf)
BPFOBJ := $(OUTPUT)/libbpf.a
BPF_INCLUDE := $(OUTPUT)
-INCLUDES := -I$(BPF_INCLUDE) -I$(OUTPUT) -I$(abspath ../../lib)
+INCLUDES := -I$(OUTPUT) -I$(BPF_INCLUDE) -I$(abspath ../../lib)
CFLAGS := -g -Wall
# Try to detect best kernel BTF source
{
uint64_t old, new = argc;
- argv = argv;
+ (void)argv;
do {
old = __sync_val_compare_and_swap(&x, 0, 0);
} while (!__sync_bool_compare_and_swap(&x, old, new));
* ifindex, but doesn't require a map to do so.
* Return
* **XDP_REDIRECT** on success, or the value of the two lower bits
- * of the **flags* argument on error.
+ * of the *flags* argument on error.
*
* int bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
* Description
static __u32 get_xdp_id(struct xdp_link_info *info, __u32 flags)
{
+ flags &= XDP_FLAGS_MODES;
+
if (info->attach_mode != XDP_ATTACHED_MULTI && !flags)
return info->prog_id;
if (flags & XDP_FLAGS_DRV_MODE)
if (*o < s->offset)
return -1;
- if (*o > s->offset + s->len)
+ if (*o >= s->offset + s->len)
return 1;
return 0;
offset &= OFFSET_STRIDE_MASK;
ol = offset;
- oh = offset >> 32;
+ oh = (offset >> 16) >> 16;
__jhash_mix(ol, oh, idx);
if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph/config ] ; then \
rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph/config; \
fi;
+ rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__/*
+ if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__ ] ; then \
+ rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__; \
+ fi;
rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/*
if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph ] ; then \
rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph; \
- p m - g r a p h
+ _
+ _ __ _ __ ___ __ _ _ __ __ _ _ __ | |__
+ | '_ \| '_ ` _ \ _____ / _` | '__/ _` | '_ \| '_ \
+ | |_) | | | | | |_____| (_| | | | (_| | |_) | | | |
+ | .__/|_| |_| |_| \__, |_| \__,_| .__/|_| |_|
+ |_| |___/ |_|
pm-graph: suspend/resume/boot timing analysis tools
- Version: 5.5
+ Version: 5.6
Author: Todd Brandt <todd.e.brandt@intel.com>
Home Page: https://01.org/pm-graph
- upstream version in git:
https://github.com/intel/pm-graph/
- Requirements:
- - runs with python2 or python3, choice is made by /usr/bin/python link
- - python2 now requires python-configparser be installed
-
Table of Contents
- Overview
- Setup
- Basic Usage
- Dev Mode Usage
- Proc Mode Usage
+ - Endurance Testing
+ - Usage Examples
- Configuration Files
- Usage Examples
- Config File Options
| SETUP |
------------------------------------------------------------------
- These packages are required to execute the scripts
+ Package Requirements
+ - runs with python2 or python3, choice is made by /usr/bin/python link
- python
- - python-requests
+ - python-configparser (for python2 sleepgraph)
+ - python-requests (for googlesheet.py)
+ - linux-tools-common (for turbostat usage in sleepgraph)
Ubuntu:
- sudo apt-get install python python-requests
+ sudo apt-get install python python-configparser python-requests linux-tools-common
Fedora:
- sudo dnf install python python-requests
+ sudo dnf install python python-configparser python-requests linux-tools-common
The tools can most easily be installed via git clone and make install
%> sudo ./sleepgraph.py -config config/suspend-proc.cfg
+------------------------------------------------------------------
+| ENDURANCE TESTING |
+------------------------------------------------------------------
+
+ The best way to gauge the health of a system is to run a series of
+ suspend/resumes over an extended period and analyze the behavior. This can be
+ accomplished with sleepgraph's -multi argument. You specify two numbers: the
+ number of tests to run OR the duration in days, hours, or minutes, and the
+ delay in seconds between them. For instance, -multi 20 5: execute 20 tests with
+ a 5 second delay between each, or -multi 24h 0: execute tests over a 24 hour
+ period with no delay between tests. You can include any other options you like
+ to generate the data you want. It's most useful to collect dev mode timelines
+ as the kprobes don't alter the performance much and you get more insight.
+
+ On completion, the output folder contains a series of folders for the
+ individual test data and a set of summary pages in the root. The summary.html
+ file is a tabular list of the tests with relevant info and links. The
+ summary-issue.html and summary-devices.html files include data taken from
+ all tests on kernel issues and device performance. The folder looks like this:
+
+ suspend-xN-{date}-{time}:
+ summary.html
+ summary-issues.html
+ summary-devices.html
+ suspend-{date}-{time} (1)
+ suspend-{date}-{time} (2)
+ ...
+
+ These are the relevant arguments to use for testing:
+
+ -m mode
+ Mode to initiate for suspend e.g. mem, freeze, standby (default: mem).
+
+ -rtcwake t
+ Use rtcwake to autoresume after t seconds (default: 15).
+
+ -gzip (optional)
+ Gzip the trace and dmesg logs to save space. The tool can also read in
+ gzipped logs for processing. This reduces the multitest folder size.
+
+ -dev (optional)
+ Add kernel source calls and threads to the timeline (default: disabled).
+
+ -multi n d
+ Execute n consecutive tests at d seconds intervals. The outputs will be
+ created in a new subdirectory: suspend-xN-{date}-{time}. When the multitest
+ run is done, the -summary command is called automatically to create summary
+ html files for all the data (unless you use -skiphtml). -skiphtml will
+ speed up the testing by not creating timelines or summary html files. You
+ can then run the tool again at a later time with -summary and -genhtml to
+ create the timelines.
+
+ -skiphtml (optional)
+ Run the test and capture the trace logs, but skip the timeline and summary
+ html generation. This can greatly speed up overall testing. You can then
+ copy the data to a faster host machine and run -summary -genhtml to
+ generate the timelines and summary.
+
+ These are the relevant commands to use after testing is complete:
+
+ -summary indir
+ Generate or regenerate the summary for a -multi test run. Creates three
+ files: summary.html, summary-issues.html, and summary-devices.html in the
+ current folder. summary.html is a table of tests with relevant info sorted
+ by kernel/host/mode, and links to the test html files. summary-issues.html
+ is a list of kernel issues found in dmesg from all the tests.
+ summary-devices.html is a list of devices and times from all the tests.
+
+ -genhtml
+ Used with -summary to regenerate any missing html timelines from their
+ dmesg and ftrace logs. This will require a significant amount of time if
+ there are thousands of tests.
+
+Usage Examples
+_______________
+
+ A multitest is initiated like this:
+
+ %> sudo ./sleepgraph.py -m mem -rtcwake 10 -dev -gzip -multi 2000 0
+
+ or you can skip timeline generation in order to speed things up
+
+ %> sudo ./sleepgraph.py -m mem -rtcwake 10 -dev -gzip -multi 2000 0 -skiphtml
+
+ The tool will produce an output folder with all the test subfolders inside.
+ Each test subfolder contains the dmesg/ftrace logs and/or the html timeline
+ depending on whether you used the -skiphtml option. The root folder contains
+ the summary.html files.
+
+ The summary for an existing multitest is generated like this:
+
+ %> cd suspend-x2000-{date}-{time}
+ %> sleepgraph.py -summary .
+
+ or if you need to generate the html timelines you can use -genhtml
+
+ %> cd suspend-xN-{date}-{time}
+ %> sleepgraph.py -summary . -genhtml
------------------------------------------------------------------
| CONFIGURATION FILES |
-#!/usr/bin/python
+#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0-only
#
# Tool for analyzing boot timing
Switch the display to the requested mode for the test using the xset command.
This helps maintain the consistency of test data for better comparison.
.TP
-\fB-skiphtml\fR
-Run the test and capture the trace logs, but skip the timeline generation.
+\fB-wifi\fR
+If a wifi connection is available, check that it reconnects after resume. Include
+the reconnect time in the total resume time calculation and treat wifi timeouts
+as resume failures.
.SS "advanced"
.TP
Include \fIt\fR ms delay after last resume (default: 0 ms).
.TP
\fB-multi \fIn d\fR
-Execute \fIn\fR consecutive tests at \fId\fR seconds intervals. The outputs will
-be created in a new subdirectory with a summary page: suspend-xN-{date}-{time}.
+Used for endurance testing. If \fIn\fR is entirely numeric, it's treated as a count:
+Execute \fIn\fR consecutive tests at \fId\fR second intervals.
+If \fIn\fR is an integer followed by a "d", "h", or "m", it's treated as a duration:
+Execute tests continuously over \fIn\fR days, hours, or minutes at \fId\fR second intervals.
+The outputs will be created in a new subdirectory, for count: suspend-{date}-{time}-xN,
+for duration: suspend-{date}-{time}-Nm. When the multitest run is done, the \fI-summary\fR
+command is called automatically to create summary html files for all the data (unless you
+use \fI-skiphtml\fR). \fI-skiphtml\fR will speed up the testing by not creating timelines
+or summary html files. You can then run the tool again at a later time with \fI-summary\fR
+and \fI-genhtml\fR to create the timelines.
+.TP
+\fB-maxfail \fIn\fR
+Abort a -multi run after \fIn\fR consecutive fails. 0 means never abort (default = 0).
+.TP
+\fB-skiphtml\fR
+Run the test and capture the trace logs, but skip the timeline generation.
+You can generate the html timelines later with \fI-dmesg\fR & \fI-ftrace\fR, or
+by running \fI-summary\fR and \fI-genhtml\fR.
.SS "ftrace debug"
.TP
.SH COMMANDS
.TP
\fB-summary \fIindir\fR
-Create a summary page of all tests in \fIindir\fR. Creates summary.html
-in the current folder. The output page is a table of tests with
-suspend and resume values sorted by suspend mode, host, and kernel.
-Includes test averages by mode and links to the test html files.
-Use -genhtml to include tests with missing html.
+Create a set of summary pages for all tests in \fIindir\fR recursively.
+Creates summary.html, summary-issues.html, and summary-devices.html in the current folder.
+summary.html is a table of tests with relevant info sorted by kernel/host/mode,
+and links to the test html files. It identifies the minimum, maximum, and median
+suspend and resume times for you with highlights and links in the header.
+summary-issues.html is a list of kernel issues found in dmesg from all the tests.
+summary-devices.html is a list of devices and times from all the tests.
+
+Use \fI-genhtml\fR to regenerate any tests with missing html.
+.TP
+\fB-genhtml\fR
+Used with \fI-summary\fR to regenerate any missing html timelines from their
+dmesg and ftrace logs. This will require a significant amount of time if there
+are thousands of tests.
.TP
\fB-modes\fR
List available suspend modes.
\fB-fpdt\fR
Print out the contents of the ACPI Firmware Performance Data Table.
.TP
-\fB-battery\fR
-Print out battery status and current charge.
-.TP
-\fB-wifi\fR
+\fB-wificheck\fR
Print out wifi status and connection details.
.TP
\fB-xon/-xoff/-xstandby/-xsuspend\fR
\fB-devinfo\fR
Print out the pm settings of all devices which support runtime suspend.
.TP
+\fB-cmdinfo\fR
+Print out all the platform data collected from the system that makes it into the logs.
+.TP
\fB-flist\fR
Print the list of ftrace functions currently being captured. Functions
that are not available as symbols in the current kernel are shown in red.
.IP
\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -x2 -predelay 500 -x2delay 500 -postdelay 500\fR
.PP
+Execute a suspend using a custom command.
+.IP
+\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR
+.PP
+
+.SS "endurance testing using -multi"
+.PP
Do a batch run of 10 freezes with 30 seconds delay between runs.
.IP
\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 10 30\fR
.PP
-Execute a suspend using a custom command.
+Do a batch run of freezes for 24 hours.
.IP
-\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR
-.PP
+\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 24h 0\fR
.SS "adding callgraph data"
Add device callgraphs. Limit the trace depth and only show callgraphs 10ms or larger.
-#!/usr/bin/python
+#!/usr/bin/env python3
# SPDX-License-Identifier: GPL-2.0-only
#
# Tool for analyzing suspend/resume timing
import platform
import signal
import codecs
-from datetime import datetime
+from datetime import datetime, timedelta
import struct
import configparser
import gzip
# store system values and test parameters
class SystemValues:
title = 'SleepGraph'
- version = '5.5'
+ version = '5.6'
ansi = False
rs = 0
display = ''
gzip = False
sync = False
+ wifi = False
verbose = False
testlog = True
dmesglog = True
cgphase = ''
cgtest = -1
cgskip = ''
- multitest = {'run': False, 'count': 0, 'delay': 0}
+ maxfail = 0
+ multitest = {'run': False, 'count': 1000000, 'delay': 0}
max_graph_depth = 0
callloopmaxgap = 0.0001
callloopmaxlen = 0.005
x2delay = 0
skiphtml = False
usecallgraph = False
- ftopfunc = 'suspend_devices_and_enter'
+ ftopfunc = 'pm_suspend'
ftop = False
usetraceevents = False
usetracemarkers = True
predelay = 0
postdelay = 0
pmdebug = ''
+ tmstart = 'SUSPEND START %Y%m%d-%H:%M:%S.%f'
+ tmend = 'RESUME COMPLETE %Y%m%d-%H:%M:%S.%f'
tracefuncs = {
'sys_sync': {},
'ksys_sync': {},
'acpi_s2idle_sync': {},
'acpi_s2idle_begin': {},
'acpi_s2idle_prepare': {},
+ 'acpi_s2idle_prepare_late': {},
'acpi_s2idle_wake': {},
'acpi_s2idle_wakeup': {},
'acpi_s2idle_restore': {},
+ 'acpi_s2idle_restore_early': {},
'hibernate_preallocate_memory': {},
'create_basic_memory_bitmaps': {},
'swsusp_write': {},
'intel_opregion_init': {},
'intel_fbdev_set_suspend': {},
}
+ infocmds = [
+ [0, 'kparams', 'cat', '/proc/cmdline'],
+ [0, 'mcelog', 'mcelog'],
+ [0, 'pcidevices', 'lspci', '-tv'],
+ [0, 'usbdevices', 'lsusb', '-t'],
+ [1, 'interrupts', 'cat', '/proc/interrupts'],
+ [1, 'wakeups', 'cat', '/sys/kernel/debug/wakeup_sources'],
+ [2, 'gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/*'],
+ [2, 'suspendstats', 'sh', '-c', 'grep -v invalid /sys/power/suspend_stats/*'],
+ [2, 'cpuidle', 'sh', '-c', 'grep -v invalid /sys/devices/system/cpu/cpu*/cpuidle/state*/s2idle/*'],
+ [2, 'battery', 'sh', '-c', 'grep -v invalid /sys/class/power_supply/*/*'],
+ ]
cgblacklist = []
kprobes = dict()
timeformat = '%.3f'
cmdline = '%s %s' % \
(os.path.basename(sys.argv[0]), ' '.join(sys.argv[1:]))
- kparams = ''
sudouser = ''
def __init__(self):
self.archargs = 'args_'+platform.machine()
if os.getuid() == 0 and 'SUDO_USER' in os.environ and \
os.environ['SUDO_USER']:
self.sudouser = os.environ['SUDO_USER']
+ def resetlog(self):
+ self.logmsg = ''
+ self.platinfo = []
def vprint(self, msg):
self.logmsg += msg+'\n'
if self.verbose or msg.startswith('WARNING:'):
return
signame = self.signames[signum] if signum in self.signames else 'UNKNOWN'
msg = 'Signal %s caused a tool exit, line %d' % (signame, frame.f_lineno)
- sysvals.outputResult({'error':msg})
+ self.outputResult({'error':msg})
sys.exit(3)
def signalHandlerInit(self):
capture = ['BUS', 'SYS', 'XCPU', 'XFSZ', 'PWR', 'HUP', 'INT', 'QUIT',
- 'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM', 'TSTP']
+ 'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM']
self.signames = dict()
for i in capture:
s = 'SIG'+i
self.outputResult({'error':msg})
sys.exit(1)
return False
+ def usable(self, file):
+ return (os.path.exists(file) and os.path.getsize(file) > 0)
def getExec(self, cmd):
try:
fp = Popen(['which', cmd], stdout=PIPE, stderr=PIPE).stdout
r = info['bios-release-date'] if 'bios-release-date' in info else ''
self.sysstamp = '# sysinfo | man:%s | plat:%s | cpu:%s | bios:%s | biosdate:%s | numcpu:%d | memsz:%d | memfr:%d' % \
(m, p, c, b, r, self.cpucount, self.memtotal, self.memfree)
- try:
- kcmd = open('/proc/cmdline', 'r').read().strip()
- except:
- kcmd = ''
- if kcmd:
- self.sysstamp += '\n# kparams | %s' % kcmd
def printSystemInfo(self, fatal=False):
self.rootCheck(True)
out = dmidecode(self.mempath, fatal)
self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html'
if not os.path.isdir(self.testdir):
os.makedirs(self.testdir)
+ self.sudoUserchown(self.testdir)
def getValueList(self, value):
out = []
for i in value.split(','):
fp.close()
self.dmesgstart = float(ktime)
def getdmesg(self, testdata):
- op = self.writeDatafileHeader(sysvals.dmesgfile, testdata)
+ op = self.writeDatafileHeader(self.dmesgfile, testdata)
# store all new dmesg lines since initdmesg was called
fp = Popen('dmesg', stdout=PIPE).stdout
for line in fp:
if name == f:
return True
return False
- def initFtrace(self):
- self.printSystemInfo(False)
- pprint('INITIALIZING FTRACE...')
+ def initFtrace(self, quiet=False):
+ if not quiet:
+ sysvals.printSystemInfo(False)
+ pprint('INITIALIZING FTRACE...')
# turn trace off
self.fsetVal('0', 'tracing_on')
self.cleanupFtrace()
if tgtsize < 65536:
tgtsize = int(self.fgetVal('buffer_size_kb')) * cpus
break
- pprint('Setting trace buffers to %d kB (%d kB per cpu)' % (tgtsize, tgtsize/cpus))
+ self.vprint('Setting trace buffers to %d kB (%d kB per cpu)' % (tgtsize, tgtsize/cpus))
# initialize the callgraph trace
if(self.usecallgraph):
# set trace type
if self.usedevsrc:
for name in self.dev_tracefuncs:
self.defaultKprobe(name, self.dev_tracefuncs[name])
- pprint('INITIALIZING KPROBES...')
+ if not quiet:
+ pprint('INITIALIZING KPROBES...')
self.addKprobes(self.verbose)
if(self.usetraceevents):
# turn trace events on
fw = test['fw']
if(fw):
fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
- if 'mcelog' in test:
- fp.write('# mcelog %s\n' % test['mcelog'])
if 'turbo' in test:
fp.write('# turbostat %s\n' % test['turbo'])
- if 'bat' in test:
- (a1, c1), (a2, c2) = test['bat']
- fp.write('# battery %s %d %s %d\n' % (a1, c1, a2, c2))
if 'wifi' in test:
- wstr = []
- for wifi in test['wifi']:
- tmp = []
- for key in sorted(wifi):
- tmp.append('%s:%s' % (key, wifi[key]))
- wstr.append('|'.join(tmp))
- fp.write('# wifi %s\n' % (','.join(wstr)))
+ fp.write('# wifi %s\n' % test['wifi'])
if test['error'] or len(testdata) > 1:
fp.write('# enter_sleep_error %s\n' % test['error'])
return fp
def b64zip(self, data):
out = base64.b64encode(codecs.encode(data.encode(), 'zlib')).decode()
return out
- def mcelog(self, clear=False):
- cmd = self.getExec('mcelog')
- if not cmd:
- return ''
- if clear:
- call(cmd+' > /dev/null 2>&1', shell=True)
- return ''
- try:
- fp = Popen([cmd], stdout=PIPE, stderr=PIPE).stdout
- out = ascii(fp.read()).strip()
- fp.close()
- except:
- return ''
- if not out:
- return ''
- return self.b64zip(out)
- def platforminfo(self):
+ def platforminfo(self, cmdafter):
# add platform info on to a completed ftrace file
if not os.path.exists(self.ftracefile):
return False
footer += '# platform-devinfo: %s\n' % self.b64zip(out)
# add a line for each of these commands with their outputs
- cmds = [
- ['pcidevices', 'lspci', '-tv'],
- ['interrupts', 'cat', '/proc/interrupts'],
- ['gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/gpe*'],
- ]
- for cargs in cmds:
- name = cargs[0]
- cmdline = ' '.join(cargs[1:])
- cmdpath = self.getExec(cargs[1])
- if not cmdpath:
+ for name, cmdline, info in cmdafter:
+ footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info))
+
+ with self.openlog(self.ftracefile, 'a') as fp:
+ fp.write(footer)
+ return True
+ def commonPrefix(self, list):
+ if len(list) < 2:
+ return ''
+ prefix = list[0]
+ for s in list[1:]:
+ while s[:len(prefix)] != prefix and prefix:
+ prefix = prefix[:len(prefix)-1]
+ if not prefix:
+ break
+ if '/' in prefix and prefix[-1] != '/':
+ prefix = prefix[0:prefix.rfind('/')+1]
+ return prefix
+ def dictify(self, text, format):
+ out = dict()
+ header = True if format == 1 else False
+ delim = ' ' if format == 1 else ':'
+ for line in text.split('\n'):
+ if header:
+ header, out['@'] = False, line
+ continue
+ line = line.strip()
+ if delim in line:
+ data = line.split(delim, 1)
+ num = re.search(r'[\d]+', data[1])
+ if format == 2 and num:
+ out[data[0].strip()] = num.group()
+ else:
+ out[data[0].strip()] = data[1]
+ return out
+ def cmdinfo(self, begin, debug=False):
+ out = []
+ if begin:
+ self.cmd1 = dict()
+ for cargs in self.infocmds:
+ delta, name = cargs[0], cargs[1]
+ cmdline, cmdpath = ' '.join(cargs[2:]), self.getExec(cargs[2])
+ if not cmdpath or (begin and not delta):
continue
- cmd = [cmdpath] + cargs[2:]
try:
- fp = Popen(cmd, stdout=PIPE, stderr=PIPE).stdout
+ fp = Popen([cmdpath]+cargs[3:], stdout=PIPE, stderr=PIPE).stdout
info = ascii(fp.read()).strip()
fp.close()
except:
continue
- if not info:
- continue
- footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info))
-
- with self.openlog(self.ftracefile, 'a') as fp:
- fp.write(footer)
- return True
+ if not debug and begin:
+ self.cmd1[name] = self.dictify(info, delta)
+ elif not debug and delta and name in self.cmd1:
+ before, after = self.cmd1[name], self.dictify(info, delta)
+ dinfo = ('\t%s\n' % before['@']) if '@' in before else ''
+ prefix = self.commonPrefix(list(before.keys()))
+ for key in sorted(before):
+ if key in after and before[key] != after[key]:
+ title = key.replace(prefix, '')
+ if delta == 2:
+ dinfo += '\t%s : %s -> %s\n' % \
+ (title, before[key].strip(), after[key].strip())
+ else:
+ dinfo += '%10s (start) : %s\n%10s (after) : %s\n' % \
+ (title, before[key], title, after[key])
+ dinfo = '\tnothing changed' if not dinfo else dinfo.rstrip()
+ out.append((name, cmdline, dinfo))
+ else:
+ out.append((name, cmdline, '\tnothing' if not info else info))
+ return out
def haveTurbostat(self):
if not self.tstat:
return False
fp = Popen([cmd, '-v'], stdout=PIPE, stderr=PIPE).stderr
out = ascii(fp.read()).strip()
fp.close()
- if re.match('turbostat version [0-9\.]* .*', out):
- sysvals.vprint(out)
+ if re.match('turbostat version .*', out):
+ self.vprint(out)
return True
return False
def turbostat(self):
fp.close()
if not keyline or not valline or len(keyline) != len(valline):
errmsg = 'unrecognized turbostat output:\n'+rawout.strip()
- sysvals.vprint(errmsg)
- if not sysvals.verbose:
+ self.vprint(errmsg)
+ if not self.verbose:
pprint(errmsg)
return ''
- if sysvals.verbose:
+ if self.verbose:
pprint(rawout.strip())
out = []
for key in keyline:
val = valline[idx]
out.append('%s=%s' % (key, val))
return '|'.join(out)
- def checkWifi(self):
- out = dict()
- iwcmd, ifcmd = self.getExec('iwconfig'), self.getExec('ifconfig')
- if not iwcmd or not ifcmd:
- return out
- fp = Popen(iwcmd, stdout=PIPE, stderr=PIPE).stdout
- for line in fp:
- m = re.match('(?P<dev>\S*) .* ESSID:(?P<ess>\S*)', ascii(line))
- if not m:
+ def wifiDetails(self, dev):
+ try:
+ info = open('/sys/class/net/%s/device/uevent' % dev, 'r').read().strip()
+ except:
+ return dev
+ vals = [dev]
+ for prop in info.split('\n'):
+ if prop.startswith('DRIVER=') or prop.startswith('PCI_ID='):
+ vals.append(prop.split('=')[-1])
+ return ':'.join(vals)
+ def checkWifi(self, dev=''):
+ try:
+ w = open('/proc/net/wireless', 'r').read().strip()
+ except:
+ return ''
+ for line in reversed(w.split('\n')):
+ m = re.match(' *(?P<dev>.*): (?P<stat>[0-9a-f]*) .*', w.split('\n')[-1])
+ if not m or (dev and dev != m.group('dev')):
continue
- out['device'] = m.group('dev')
- if '"' in m.group('ess'):
- out['essid'] = m.group('ess').strip('"')
- break
- fp.close()
- if 'device' in out:
- fp = Popen([ifcmd, out['device']], stdout=PIPE, stderr=PIPE).stdout
- for line in fp:
- m = re.match('.* inet (?P<ip>[0-9\.]*)', ascii(line))
- if m:
- out['ip'] = m.group('ip')
- break
- fp.close()
- return out
+ return m.group('dev')
+ return ''
+ def pollWifi(self, dev, timeout=60):
+ start = time.time()
+ while (time.time() - start) < timeout:
+ w = self.checkWifi(dev)
+ if w:
+ return '%s reconnected %.2f' % \
+ (self.wifiDetails(dev), max(0, time.time() - start))
+ time.sleep(0.01)
+ return '%s timeout %d' % (self.wifiDetails(dev), timeout)
def errorSummary(self, errinfo, msg):
found = False
for entry in errinfo:
arr[j] = arr[j]\
.replace('\\', '\\\\').replace(']', '\]').replace('[', '\[')\
.replace('.', '\.').replace('+', '\+').replace('*', '\*')\
- .replace('(', '\(').replace(')', '\)')
- mstr = ' '.join(arr)
+ .replace('(', '\(').replace(')', '\)').replace('}', '\}')\
+ .replace('{', '\{')
+ mstr = ' *'.join(arr)
entry = {
'line': msg,
'match': mstr,
'urls': {self.hostname: [self.htmlfile]}
}
errinfo.append(entry)
+ def multistat(self, start, idx, finish):
+ if 'time' in self.multitest:
+ id = '%d Duration=%dmin' % (idx+1, self.multitest['time'])
+ else:
+ id = '%d/%d' % (idx+1, self.multitest['count'])
+ t = time.time()
+ if 'start' not in self.multitest:
+ self.multitest['start'] = self.multitest['last'] = t
+ self.multitest['total'] = 0.0
+ pprint('TEST (%s) START' % id)
+ return
+ dt = t - self.multitest['last']
+ if not start:
+ if idx == 0 and self.multitest['delay'] > 0:
+ self.multitest['total'] += self.multitest['delay']
+ pprint('TEST (%s) COMPLETE -- Duration %.1fs' % (id, dt))
+ return
+ self.multitest['total'] += dt
+ self.multitest['last'] = t
+ avg = self.multitest['total'] / idx
+ if 'time' in self.multitest:
+ left = finish - datetime.now()
+ left -= timedelta(microseconds=left.microseconds)
+ else:
+ left = timedelta(seconds=((self.multitest['count'] - idx) * int(avg)))
+ pprint('TEST (%s) START - Avg Duration %.1fs, Time left %s' % \
+ (id, avg, str(left)))
+ def multiinit(self, c, d):
+ sz, unit = 'count', 'm'
+ if c.endswith('d') or c.endswith('h') or c.endswith('m'):
+ sz, unit, c = 'time', c[-1], c[:-1]
+ self.multitest['run'] = True
+ self.multitest[sz] = getArgInt('multi: n d (exec count)', c, 1, 1000000, False)
+ self.multitest['delay'] = getArgInt('multi: n d (delay between tests)', d, 0, 3600, False)
+ if unit == 'd':
+ self.multitest[sz] *= 1440
+ elif unit == 'h':
+ self.multitest[sz] *= 60
sysvals = SystemValues()
switchvalues = ['enable', 'disable', 'on', 'off', 'true', 'false', '1', '0']
'resume_complete': {'order': 9, 'color': '#FFFFCC'},
}
errlist = {
- 'HWERROR' : '.*\[ *Hardware Error *\].*',
- 'FWBUG' : '.*\[ *Firmware Bug *\].*',
- 'BUG' : '.*BUG.*',
- 'ERROR' : '.*ERROR.*',
- 'WARNING' : '.*WARNING.*',
- 'IRQ' : '.*genirq: .*',
- 'TASKFAIL': '.*Freezing of tasks *.*',
- 'ACPI' : '.*ACPI *(?P<b>[A-Za-z]*) *Error[: ].*',
- 'DEVFAIL' : '.* failed to (?P<b>[a-z]*) async: .*',
- 'DISKFULL': '.*No space left on device.*',
- 'USBERR' : '.*usb .*device .*, error [0-9-]*',
- 'ATAERR' : ' *ata[0-9\.]*: .*failed.*',
- 'MEIERR' : ' *mei.*: .*failed.*',
- 'TPMERR' : '(?i) *tpm *tpm[0-9]*: .*error.*',
+ 'HWERROR' : r'.*\[ *Hardware Error *\].*',
+ 'FWBUG' : r'.*\[ *Firmware Bug *\].*',
+ 'BUG' : r'(?i).*\bBUG\b.*',
+ 'ERROR' : r'(?i).*\bERROR\b.*',
+ 'WARNING' : r'(?i).*\bWARNING\b.*',
+ 'FAULT' : r'(?i).*\bFAULT\b.*',
+ 'FAIL' : r'(?i).*\bFAILED\b.*',
+ 'INVALID' : r'(?i).*\bINVALID\b.*',
+ 'CRASH' : r'(?i).*\bCRASHED\b.*',
+ 'IRQ' : r'.*\bgenirq: .*',
+ 'TASKFAIL': r'.*Freezing of tasks *.*',
+ 'ACPI' : r'.*\bACPI *(?P<b>[A-Za-z]*) *Error[: ].*',
+ 'DISKFULL': r'.*\bNo space left on device.*',
+ 'USBERR' : r'.*usb .*device .*, error [0-9-]*',
+ 'ATAERR' : r' *ata[0-9\.]*: .*failed.*',
+ 'MEIERR' : r' *mei.*: .*failed.*',
+ 'TPMERR' : r'(?i) *tpm *tpm[0-9]*: .*error.*',
}
def __init__(self, num):
idchar = 'abcdefghij'
self.start = 0.0 # test start
self.end = 0.0 # test end
+ self.hwstart = 0 # rtc test start
+ self.hwend = 0 # rtc test end
self.tSuspended = 0.0 # low-level suspend start
self.tResumed = 0.0 # low-level resume start
self.tKernSus = 0.0 # kernel level suspend start
self.stamp = 0
self.outfile = ''
self.kerror = False
- self.battery = 0
- self.wifi = 0
+ self.wifi = dict()
self.turbostat = 0
- self.mcelog = 0
self.enterfail = ''
self.currphase = ''
self.pstl = dict() # process timeline
continue
dir = 'suspend' if t < self.tSuspended else 'resume'
msg = m.group('msg')
+ if re.match('capability: warning: .*', msg):
+ continue
for err in self.errlist:
if re.match(self.errlist[err], msg):
list.append((msg, err, dir, t, i, i))
msglist = []
for msg, type, dir, t, idx1, idx2 in list:
msglist.append(msg)
- sysvals.vprint('kernel %s found in %s at %f' % (type, dir, t))
self.errorinfo[dir].append((type, t, idx1, idx2))
if self.kerror:
sysvals.dmesglog = True
if len(self.dmesgtext) < 1 and sysvals.dmesgfile:
lf.close()
return msglist
- def setStart(self, time):
+ def setStart(self, time, msg=''):
self.start = time
- def setEnd(self, time):
+ if msg:
+ try:
+ self.hwstart = datetime.strptime(msg, sysvals.tmstart)
+ except:
+ self.hwstart = 0
+ def setEnd(self, time, msg=''):
self.end = time
+ if msg:
+ try:
+ self.hwend = datetime.strptime(msg, sysvals.tmend)
+ except:
+ self.hwend = 0
def isTraceEventOutsideDeviceCalls(self, pid, time):
for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
self.trimTime(tS, tL, left)
self.tLow.append('%.0f'%(tL*1000))
lp = phase
+ def getMemTime(self):
+ if not self.hwstart or not self.hwend:
+ return
+ stime = (self.tSuspended - self.start) * 1000000
+ rtime = (self.end - self.tResumed) * 1000000
+ hws = self.hwstart + timedelta(microseconds=stime)
+ hwr = self.hwend - timedelta(microseconds=rtime)
+ self.tLow.append('%.0f'%((hwr - hws).total_seconds() * 1000))
def getTimeValues(self):
sktime = (self.tSuspended - self.tKernSus) * 1000
rktime = (self.tKernRes - self.tResumed) * 1000
c = self.addProcessUsageEvent(ps, tres)
if c > 0:
sysvals.vprint('%25s (res): %d' % (ps, c))
- def handleEndMarker(self, time):
+ def handleEndMarker(self, time, msg=''):
dm = self.dmesg
- self.setEnd(time)
+ self.setEnd(time, msg)
self.initDevicegroups()
# give suspend_prepare an end if needed
if 'suspend_prepare' in dm and dm['suspend_prepare']['end'] < 0:
if not self.fevent:
return False
if sysvals.usetracemarkers:
- if(self.name == 'SUSPEND START'):
+ if(self.name.startswith('SUSPEND START')):
return True
return False
else:
if not self.fevent:
return False
if sysvals.usetracemarkers:
- if(self.name == 'RESUME COMPLETE'):
+ if(self.name.startswith('RESUME COMPLETE')):
return True
return False
else:
def createHeader(self, sv, stamp):
if(not stamp['time']):
return
- self.html += '<div class="version"><a href="https://01.org/suspendresume">%s v%s</a></div>' \
+ self.html += '<div class="version"><a href="https://01.org/pm-graph">%s v%s</a></div>' \
% (sv.title, sv.version)
if sv.logmsg and sv.testlog:
self.html += '<button id="showtest" class="logbtn btnfmt">log</button>'
stampfmt = '# [a-z]*-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\
'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
- batteryfmt = '^# battery (?P<a1>\w*) (?P<c1>\d*) (?P<a2>\w*) (?P<c2>\d*)'
- wififmt = '^# wifi (?P<w>.*)'
+ wififmt = '^# wifi *(?P<d>\S*) *(?P<s>\S*) *(?P<t>[0-9\.]+).*'
tstatfmt = '^# turbostat (?P<t>\S*)'
- mcelogfmt = '^# mcelog (?P<m>\S*)'
testerrfmt = '^# enter_sleep_error (?P<e>.*)'
sysinfofmt = '^# sysinfo .*'
cmdlinefmt = '^# command \| (?P<cmd>.*)'
- kparamsfmt = '^# kparams \| (?P<kp>.*)'
devpropfmt = '# Device Properties: .*'
pinfofmt = '# platform-(?P<val>[a-z,A-Z,0-9]*): (?P<info>.*)'
tracertypefmt = '# tracer: (?P<t>.*)'
self.stamp = ''
self.sysinfo = ''
self.cmdline = ''
- self.kparams = ''
self.testerror = []
- self.mcelog = []
self.turbostat = []
- self.battery = []
self.wifi = []
self.fwdata = []
self.ftrace_line_fmt = self.ftrace_line_fmt_nop
elif re.match(self.sysinfofmt, line):
self.sysinfo = line
return True
- elif re.match(self.kparamsfmt, line):
- self.kparams = line
- return True
elif re.match(self.cmdlinefmt, line):
self.cmdline = line
return True
- elif re.match(self.mcelogfmt, line):
- self.mcelog.append(line)
- return True
elif re.match(self.tstatfmt, line):
self.turbostat.append(line)
return True
- elif re.match(self.batteryfmt, line):
- self.battery.append(line)
- return True
elif re.match(self.wififmt, line):
self.wifi.append(line)
return True
def parseStamp(self, data, sv):
# global test data
m = re.match(self.stampfmt, self.stamp)
+ if not self.stamp or not m:
+ doError('data does not include the expected stamp')
data.stamp = {'time': '', 'host': '', 'mode': ''}
dt = datetime(int(m.group('y'))+2000, int(m.group('m')),
int(m.group('d')), int(m.group('H')), int(m.group('M')),
m = re.match(self.cmdlinefmt, self.cmdline)
if m:
sv.cmdline = m.group('cmd')
- if self.kparams:
- m = re.match(self.kparamsfmt, self.kparams)
- if m:
- sv.kparams = m.group('kp')
if not sv.stamp:
sv.stamp = data.stamp
# firmware data
data.fwSuspend, data.fwResume = int(m.group('s')), int(m.group('r'))
if(data.fwSuspend > 0 or data.fwResume > 0):
data.fwValid = True
- # mcelog data
- if len(self.mcelog) > data.testnumber:
- m = re.match(self.mcelogfmt, self.mcelog[data.testnumber])
- if m:
- data.mcelog = sv.b64unzip(m.group('m'))
# turbostat data
if len(self.turbostat) > data.testnumber:
m = re.match(self.tstatfmt, self.turbostat[data.testnumber])
if m:
data.turbostat = m.group('t')
- # battery data
- if len(self.battery) > data.testnumber:
- m = re.match(self.batteryfmt, self.battery[data.testnumber])
- if m:
- data.battery = m.groups()
# wifi data
if len(self.wifi) > data.testnumber:
m = re.match(self.wififmt, self.wifi[data.testnumber])
if m:
- data.wifi = m.group('w')
+ data.wifi = {'dev': m.group('d'), 'stat': m.group('s'),
+ 'time': float(m.group('t'))}
+ data.stamp['wifi'] = m.group('d')
# sleep mode enter errors
if len(self.testerror) > data.testnumber:
m = re.match(self.testerrfmt, self.testerror[data.testnumber])
if(t.startMarker()):
data = testrun[testidx].data
tp.parseStamp(data, sysvals)
- data.setStart(t.time)
+ data.setStart(t.time, t.name)
continue
if(not data):
continue
# find the end of resume
if(t.endMarker()):
- data.setEnd(t.time)
+ data.setEnd(t.time, t.name)
testidx += 1
if(testidx >= testcnt):
break
doError('%s does not exist' % sysvals.ftracefile)
if not live:
sysvals.setupAllKprobes()
- ksuscalls = ['pm_prepare_console']
+ ksuscalls = ['ksys_sync', 'pm_prepare_console']
krescalls = ['pm_restore_console']
tracewatch = ['irq_wakeup']
if sysvals.usekprobes:
testruns = []
testdata = []
testrun = 0
- data = 0
+ data, limbo = 0, True
tf = sysvals.openlog(sysvals.ftracefile, 'r')
phase = 'suspend_prepare'
for line in tf:
continue
# find the start of suspend
if(t.startMarker()):
- data = Data(len(testdata))
+ data, limbo = Data(len(testdata)), False
testdata.append(data)
testrun = TestRun(data)
testruns.append(testrun)
tp.parseStamp(data, sysvals)
- data.setStart(t.time)
+ data.setStart(t.time, t.name)
data.first_suspend_prepare = True
phase = data.setPhase('suspend_prepare', t.time, True)
continue
- if(not data):
+ if(not data or limbo):
continue
# process cpu exec line
if t.type == 'tracing_mark_write':
continue
# find the end of resume
if(t.endMarker()):
- data.handleEndMarker(t.time)
+ if data.tKernRes == 0:
+ data.tKernRes = t.time
+ data.handleEndMarker(t.time, t.name)
if(not sysvals.usetracemarkers):
# no trace markers? then quit and be sure to finish recording
# the event we used to trigger resume end
if('thaw_processes' in testrun.ttemp and len(testrun.ttemp['thaw_processes']) > 0):
# if an entry exists, assume this is its end
testrun.ttemp['thaw_processes'][-1]['end'] = t.time
- break
+ limbo = True
continue
# trace event processing
if(t.fevent):
# -- phase changes --
# start of kernel suspend
if(re.match('suspend_enter\[.*', t.name)):
- if(isbegin):
+ if(isbegin and data.tKernSus == 0):
data.tKernSus = t.time
continue
# suspend_prepare start
elif(re.match('machine_suspend\[.*', t.name)):
if(isbegin):
lp = data.lastPhase()
- if lp == 'resume_machine':
+ if lp.startswith('resume_machine'):
data.dmesg[lp]['end'] = t.time
phase = data.setPhase('suspend_machine', data.dmesg[lp]['end'], True)
data.setPhase(phase, t.time, False)
'proc': m_proc,
})
# start of kernel resume
- if(phase == 'suspend_prepare' and kprobename in ksuscalls):
+ if(data.tKernSus == 0 and phase == 'suspend_prepare' \
+ and kprobename in ksuscalls):
data.tKernSus = t.time
elif(t.freturn):
if(key not in tp.ktemp) or len(tp.ktemp[key]) < 1:
sysvals.vprint('WARNING: ftrace start marker is missing')
if data and not data.devicegroups:
sysvals.vprint('WARNING: ftrace end marker is missing')
- data.handleEndMarker(t.time)
+ data.handleEndMarker(t.time, t.name)
if sysvals.suspendmode == 'command':
for test in testruns:
data.fwValid = False
sysvals.vprint('WARNING: phase "%s" is missing!' % p)
lp = p
+ if not terr and 'dev' in data.wifi and data.wifi['stat'] == 'timeout':
+ terr = '%s%s failed in wifi_resume <i>(%s %.0fs timeout)</i>' % \
+ (sysvals.suspendmode, tn, data.wifi['dev'], data.wifi['time'])
+ error.append(terr)
if not terr and data.enterfail:
pprint('test%s FAILED: enter %s failed with %s' % (tn, sysvals.suspendmode, data.enterfail))
terr = 'test%s failed to enter %s mode' % (tn, sysvals.suspendmode)
tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
num = 0
- useturbo = False
+ useturbo = usewifi = False
lastmode = ''
cnt = dict()
for data in sorted(testruns, key=lambda v:(v['mode'], v['host'], v['kernel'], v['time'])):
tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
num = 0
- pkgpc10 = syslpi = ''
+ pkgpc10 = syslpi = wifi = ''
if 'pkgpc10' in data and 'syslpi' in data:
- pkgpc10 = data['pkgpc10']
- syslpi = data['syslpi']
- useturbo = True
+ pkgpc10, syslpi, useturbo = data['pkgpc10'], data['syslpi'], True
+ if 'wifi' in data:
+ wifi, usewifi = data['wifi'], True
res = data['result']
tVal = [float(data['suspend']), float(data['resume'])]
list[mode]['data'].append([data['host'], data['kernel'],
data['time'], tVal[0], tVal[1], data['url'], res,
data['issues'], data['sus_worst'], data['sus_worsttime'],
- data['res_worst'], data['res_worsttime'], pkgpc10, syslpi])
+ data['res_worst'], data['res_worsttime'], pkgpc10, syslpi, wifi])
idx = len(list[mode]['data']) - 1
if res.startswith('fail in'):
res = 'fail'
td = '\t<td>{0}</td>\n'
tdh = '\t<td{1}>{0}</td>\n'
tdlink = '\t<td><a href="{0}">html</a></td>\n'
- colspan = '14' if useturbo else '12'
+ cols = 12
+ if useturbo:
+ cols += 2
+ if usewifi:
+ cols += 1
+ colspan = '%d' % cols
# table header
html += '<table>\n<tr>\n' + th.format('#') +\
th.format('Worst Resume Device') + th.format('RD Time')
if useturbo:
html += th.format('PkgPC10') + th.format('SysLPI')
+ if usewifi:
+ html += th.format('Wifi')
html += th.format('Detail')+'</tr>\n'
# export list into html
head = '<tr class="head"><td>{0}</td><td>{1}</td>'+\
if useturbo:
html += td.format(d[12]) # pkg_pc10
html += td.format(d[13]) # syslpi
+ if usewifi:
+ html += td.format(d[14]) # wifi
html += tdlink.format(d[5]) if d[5] else td.format('') # url
html += '</tr>\n'
num += 1
kerror = True
if(sysvals.suspendmode in ['freeze', 'standby']):
data.trimFreezeTime(testruns[-1].tSuspended)
+ else:
+ data.getMemTime()
# html function templates
html_error = '<div id="{1}" title="kernel error/warning" class="err" style="right:{0}%">{2}→</div>\n'
'<td class="green">Execution Time: <b>{0} ms</b></td>'\
'<td class="yellow">Command: <b>{1}</b></td>'\
'</tr>\n</table>\n'
- html_timegroups = '<table class="time2">\n<tr>'\
- '<td class="green" title="time from kernel enter_state({5}) to firmware mode [kernel time only]">{4}Kernel Suspend: {0} ms</td>'\
- '<td class="purple">{4}Firmware Suspend: {1} ms</td>'\
- '<td class="purple">{4}Firmware Resume: {2} ms</td>'\
- '<td class="yellow" title="time from firmware mode to return from kernel enter_state({5}) [kernel time only]">{4}Kernel Resume: {3} ms</td>'\
- '</tr>\n</table>\n'
html_fail = '<table class="testfail"><tr><td>{0}</td></tr></table>\n'
+ html_kdesc = '<td class="{3}" title="time spent in kernel execution">{0}Kernel {2}: {1} ms</td>'
+ html_fwdesc = '<td class="{3}" title="time spent in firmware">{0}Firmware {2}: {1} ms</td>'
+ html_wifdesc = '<td class="yellow" title="time for wifi to reconnect after resume complete ({2})">{0}Wifi Resume: {1}</td>'
# html format variables
scaleH = 20
# Generate the header for this timeline
for data in testruns:
tTotal = data.end - data.start
- sktime, rktime = data.getTimeValues()
if(tTotal == 0):
doError('No timeline data')
- if(len(data.tLow) > 0):
- low_time = '+'.join(data.tLow)
if sysvals.suspendmode == 'command':
- run_time = '%.0f'%((data.end-data.start)*1000)
+ run_time = '%.0f' % (tTotal * 1000)
if sysvals.testcommand:
testdesc = sysvals.testcommand
else:
testdesc = ordinal(data.testnumber+1)+' '+testdesc
thtml = html_timetotal3.format(run_time, testdesc)
devtl.html += thtml
- elif data.fwValid:
- suspend_time = '%.0f'%(sktime + (data.fwSuspend/1000000.0))
- resume_time = '%.0f'%(rktime + (data.fwResume/1000000.0))
- testdesc1 = 'Total'
- testdesc2 = ''
- stitle = 'time from kernel enter_state(%s) to low-power mode [kernel & firmware time]' % sysvals.suspendmode
- rtitle = 'time from low-power mode to return from kernel enter_state(%s) [firmware & kernel time]' % sysvals.suspendmode
- if(len(testruns) > 1):
- testdesc1 = testdesc2 = ordinal(data.testnumber+1)
- testdesc2 += ' '
- if(len(data.tLow) == 0):
- thtml = html_timetotal.format(suspend_time, \
- resume_time, testdesc1, stitle, rtitle)
- else:
- thtml = html_timetotal2.format(suspend_time, low_time, \
- resume_time, testdesc1, stitle, rtitle)
- devtl.html += thtml
+ continue
+ # typical full suspend/resume header
+ stot, rtot = sktime, rktime = data.getTimeValues()
+ ssrc, rsrc, testdesc, testdesc2 = ['kernel'], ['kernel'], 'Kernel', ''
+ if data.fwValid:
+ stot += (data.fwSuspend/1000000.0)
+ rtot += (data.fwResume/1000000.0)
+ ssrc.append('firmware')
+ rsrc.append('firmware')
+ testdesc = 'Total'
+ if 'time' in data.wifi and data.wifi['stat'] != 'timeout':
+ rtot += data.end - data.tKernRes + (data.wifi['time'] * 1000.0)
+ rsrc.append('wifi')
+ testdesc = 'Total'
+ suspend_time, resume_time = '%.3f' % stot, '%.3f' % rtot
+ stitle = 'time from kernel suspend start to %s mode [%s time]' % \
+ (sysvals.suspendmode, ' & '.join(ssrc))
+ rtitle = 'time from %s mode to kernel resume complete [%s time]' % \
+ (sysvals.suspendmode, ' & '.join(rsrc))
+ if(len(testruns) > 1):
+ testdesc = testdesc2 = ordinal(data.testnumber+1)
+ testdesc2 += ' '
+ if(len(data.tLow) == 0):
+ thtml = html_timetotal.format(suspend_time, \
+ resume_time, testdesc, stitle, rtitle)
+ else:
+ low_time = '+'.join(data.tLow)
+ thtml = html_timetotal2.format(suspend_time, low_time, \
+ resume_time, testdesc, stitle, rtitle)
+ devtl.html += thtml
+ if not data.fwValid and 'dev' not in data.wifi:
+ continue
+ # extra detail when the times come from multiple sources
+ thtml = '<table class="time2">\n<tr>'
+ thtml += html_kdesc.format(testdesc2, '%.3f'%sktime, 'Suspend', 'green')
+ if data.fwValid:
sftime = '%.3f'%(data.fwSuspend / 1000000.0)
rftime = '%.3f'%(data.fwResume / 1000000.0)
- devtl.html += html_timegroups.format('%.3f'%sktime, \
- sftime, rftime, '%.3f'%rktime, testdesc2, sysvals.suspendmode)
- else:
- suspend_time = '%.3f' % sktime
- resume_time = '%.3f' % rktime
- testdesc = 'Kernel'
- stitle = 'time from kernel enter_state(%s) to firmware mode [kernel time only]' % sysvals.suspendmode
- rtitle = 'time from firmware mode to return from kernel enter_state(%s) [kernel time only]' % sysvals.suspendmode
- if(len(testruns) > 1):
- testdesc = ordinal(data.testnumber+1)+' '+testdesc
- if(len(data.tLow) == 0):
- thtml = html_timetotal.format(suspend_time, \
- resume_time, testdesc, stitle, rtitle)
+ thtml += html_fwdesc.format(testdesc2, sftime, 'Suspend', 'green')
+ thtml += html_fwdesc.format(testdesc2, rftime, 'Resume', 'yellow')
+ thtml += html_kdesc.format(testdesc2, '%.3f'%rktime, 'Resume', 'yellow')
+ if 'time' in data.wifi:
+ if data.wifi['stat'] != 'timeout':
+ wtime = '%.0f ms'%(data.end - data.tKernRes + (data.wifi['time'] * 1000.0))
else:
- thtml = html_timetotal2.format(suspend_time, low_time, \
- resume_time, testdesc, stitle, rtitle)
- devtl.html += thtml
-
+ wtime = 'TIMEOUT'
+ thtml += html_wifdesc.format(testdesc2, wtime, data.wifi['dev'])
+ thtml += '</tr>\n</table>\n'
+ devtl.html += thtml
if testfail:
devtl.html += html_fail.format(testfail)
# Description:
# Execute system suspend through the sysfs interface, then copy the output
# dmesg and ftrace files to the test output directory.
-def executeSuspend():
+def executeSuspend(quiet=False):
pm = ProcessMonitor()
tp = sysvals.tpath
- wifi = sysvals.checkWifi()
+ if sysvals.wifi:
+ wifi = sysvals.checkWifi()
testdata = []
- battery = True if getBattery() else False
# run these commands to prepare the system for suspend
if sysvals.display:
- pprint('SET DISPLAY TO %s' % sysvals.display.upper())
+ if not quiet:
+ pprint('SET DISPLAY TO %s' % sysvals.display.upper())
displayControl(sysvals.display)
time.sleep(1)
if sysvals.sync:
- pprint('SYNCING FILESYSTEMS')
+ if not quiet:
+ pprint('SYNCING FILESYSTEMS')
call('sync', shell=True)
# mark the start point in the kernel ring buffer just as we start
sysvals.initdmesg()
# start ftrace
if(sysvals.usecallgraph or sysvals.usetraceevents):
- pprint('START TRACING')
+ if not quiet:
+ pprint('START TRACING')
sysvals.fsetVal('1', 'tracing_on')
if sysvals.useprocmon:
pm.start()
+ sysvals.cmdinfo(True)
# execute however many s/r runs requested
for count in range(1,sysvals.execcount+1):
# x2delay in between test runs
pprint('SUSPEND START')
else:
pprint('SUSPEND START (press a key to resume)')
- sysvals.mcelog(True)
- bat1 = getBattery() if battery else False
# set rtcwake
if(sysvals.rtcwake):
- pprint('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
+ if not quiet:
+ pprint('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
sysvals.rtcWakeAlarmOn()
# start of suspend trace marker
if(sysvals.usecallgraph or sysvals.usetraceevents):
- sysvals.fsetVal('SUSPEND START', 'trace_marker')
+ sysvals.fsetVal(datetime.now().strftime(sysvals.tmstart), 'trace_marker')
# predelay delay
if(count == 1 and sysvals.predelay > 0):
sysvals.fsetVal('WAIT %d' % sysvals.predelay, 'trace_marker')
# return from suspend
pprint('RESUME COMPLETE')
if(sysvals.usecallgraph or sysvals.usetraceevents):
- sysvals.fsetVal('RESUME COMPLETE', 'trace_marker')
+ sysvals.fsetVal(datetime.now().strftime(sysvals.tmend), 'trace_marker')
+ if sysvals.wifi and wifi:
+ tdata['wifi'] = sysvals.pollWifi(wifi)
if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'):
tdata['fw'] = getFPDT(False)
- mcelog = sysvals.mcelog()
- if mcelog:
- tdata['mcelog'] = mcelog
- bat2 = getBattery() if battery else False
- if battery and bat1 and bat2:
- tdata['bat'] = (bat1, bat2)
- if 'device' in wifi and 'ip' in wifi:
- tdata['wifi'] = (wifi, sysvals.checkWifi())
testdata.append(tdata)
+ cmdafter = sysvals.cmdinfo(False)
# stop ftrace
if(sysvals.usecallgraph or sysvals.usetraceevents):
if sysvals.useprocmon:
pm.stop()
sysvals.fsetVal('0', 'tracing_on')
# grab a copy of the dmesg output
- pprint('CAPTURING DMESG')
+ if not quiet:
+ pprint('CAPTURING DMESG')
sysvals.getdmesg(testdata)
# grab a copy of the ftrace output
if(sysvals.usecallgraph or sysvals.usetraceevents):
- pprint('CAPTURING TRACE')
+ if not quiet:
+ pprint('CAPTURING TRACE')
op = sysvals.writeDatafileHeader(sysvals.ftracefile, testdata)
fp = open(tp+'trace', 'r')
for line in fp:
op.write(line)
op.close()
sysvals.fsetVal('', 'trace')
- sysvals.platforminfo()
- return testdata
+ sysvals.platforminfo(cmdafter)
def readFile(file):
if os.path.islink(file):
count += 1
return out
-def getBattery():
- p, charge, bat = '/sys/class/power_supply', 0, {}
- if not os.path.exists(p):
- return False
- for d in os.listdir(p):
- type = sysvals.getVal(os.path.join(p, d, 'type')).strip().lower()
- if type != 'battery':
- continue
- for v in ['status', 'energy_now', 'capacity_now']:
- bat[v] = sysvals.getVal(os.path.join(p, d, v)).strip().lower()
- break
- if 'status' not in bat:
- return False
- ac = False if 'discharging' in bat['status'] else True
- for v in ['energy_now', 'capacity_now']:
- if v in bat and bat[v]:
- charge = int(bat[v])
- return (ac, charge)
-
def displayControl(cmd):
xset, ret = 'timeout 10 xset -d :0.0 {0}', 0
if sysvals.sudouser:
status = 'rtcwake is not properly supported'
pprint(' is rtcwake supported: %s' % res)
+ # check info commands
+ pprint(' optional commands this tool may use for info:')
+ no = sysvals.colorText('MISSING')
+ yes = sysvals.colorText('FOUND', 32)
+ for c in ['turbostat', 'mcelog', 'lspci', 'lsusb']:
+ if c == 'turbostat':
+ res = yes if sysvals.haveTurbostat() else no
+ else:
+ res = yes if sysvals.getExec(c) else no
+ pprint(' %s: %s' % (c, res))
+
if not probecheck:
return status
doError(name+': value should be between %f and %f' % (min, max), True)
return val
-def processData(live=False):
- pprint('PROCESSING DATA')
+def processData(live=False, quiet=False):
+ if not quiet:
+ pprint('PROCESSING DATA')
sysvals.vprint('usetraceevents=%s, usetracemarkers=%s, usekprobes=%s' % \
(sysvals.usetraceevents, sysvals.usetracemarkers, sysvals.usekprobes))
error = ''
parseKernelLog(data)
if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)):
appendIncompleteTraceLog(testruns)
+ if not sysvals.stamp:
+ pprint('ERROR: data does not include the expected stamp')
+ return (testruns, {'error': 'timeline generation failed'})
shown = ['bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr',
- 'memsz', 'mode', 'numcpu', 'plat', 'time']
+ 'memsz', 'mode', 'numcpu', 'plat', 'time', 'wifi']
sysvals.vprint('System Info:')
for key in sorted(sysvals.stamp):
if key in shown:
sysvals.vprint(' %-8s : %s' % (key.upper(), sysvals.stamp[key]))
- if sysvals.kparams:
- sysvals.vprint('Kparams:\n %s' % sysvals.kparams)
sysvals.vprint('Command:\n %s' % sysvals.cmdline)
for data in testruns:
- if data.mcelog:
- sysvals.vprint('MCELOG Data:')
- for line in data.mcelog.split('\n'):
- sysvals.vprint(' %s' % line)
if data.turbostat:
idx, s = 0, 'Turbostat:\n '
for val in data.turbostat.split('|'):
s += '\n '
s += val + ' '
sysvals.vprint(s)
- if data.battery:
- a1, c1, a2, c2 = data.battery
- s = 'Battery:\n Before - AC: %s, Charge: %d\n After - AC: %s, Charge: %d' % \
- (a1, int(c1), a2, int(c2))
- sysvals.vprint(s)
- if data.wifi:
- w = data.wifi.replace('|', ' ').split(',')
- s = 'Wifi:\n Before %s\n After %s' % \
- (w[0], w[1])
- sysvals.vprint(s)
data.printDetails()
- if len(sysvals.platinfo) > 0:
- sysvals.vprint('\nPlatform Info:')
- for info in sysvals.platinfo:
- sysvals.vprint(info[0]+' - '+info[1])
- sysvals.vprint(info[2])
- sysvals.vprint('')
+ if len(sysvals.platinfo) > 0:
+ sysvals.vprint('\nPlatform Info:')
+ for info in sysvals.platinfo:
+ sysvals.vprint('[%s - %s]' % (info[0], info[1]))
+ sysvals.vprint(info[2])
+ sysvals.vprint('')
if sysvals.cgdump:
for data in testruns:
data.debugPrint()
return (testruns, {'error': 'timeline generation failed'})
sysvals.vprint('Creating the html timeline (%s)...' % sysvals.htmlfile)
createHTML(testruns, error)
- pprint('DONE')
+ if not quiet:
+ pprint('DONE')
data = testruns[0]
stamp = data.stamp
stamp['suspend'], stamp['resume'] = data.getTimeValues()
doError('a directory already exists with this name: %s' % sysvals.htmlfile)
elif not os.access(sysvals.htmlfile, os.W_OK):
doError('missing permission to write to %s' % sysvals.htmlfile)
- testruns, stamp = processData(False)
- sysvals.logmsg = ''
+ testruns, stamp = processData()
+ sysvals.resetlog()
return stamp
# Function: runTest
# Description:
# execute a suspend/resume, gather the logs, and generate the output
-def runTest(n=0):
+def runTest(n=0, quiet=False):
# prepare for the test
- sysvals.initFtrace()
+ sysvals.initFtrace(quiet)
sysvals.initTestOutput('suspend')
# execute the test
- testdata = executeSuspend()
+ executeSuspend(quiet)
sysvals.cleanupFtrace()
if sysvals.skiphtml:
+ sysvals.outputResult({}, n)
sysvals.sudoUserchown(sysvals.testdir)
return
- if not testdata[0]['error']:
- testruns, stamp = processData(True)
- for data in testruns:
- del data
- else:
- stamp = testdata[0]
-
+ testruns, stamp = processData(True, quiet)
+ for data in testruns:
+ del data
sysvals.sudoUserchown(sysvals.testdir)
sysvals.outputResult(stamp, n)
if 'error' in stamp:
return 0
def find_in_html(html, start, end, firstonly=True):
- n, out = 0, []
- while n < len(html):
- m = re.search(start, html[n:])
+ n, cnt, out = 0, len(html), []
+ while n < cnt:
+ e = cnt if (n + 10000 > cnt or n == 0) else n + 10000
+ m = re.search(start, html[n:e])
if not m:
break
i = m.end()
- m = re.search(end, html[n+i:])
+ m = re.search(end, html[n+i:e])
if not m:
break
j = m.start()
tstr = dt.strftime('%Y/%m/%d %H:%M:%S')
error = find_in_html(html, '<table class="testfail"><tr><td>', '</td>')
if error:
- m = re.match('[a-z]* failed in (?P<p>[a-z0-9_]*) phase', error)
+ m = re.match('[a-z0-9]* failed in (?P<p>\S*).*', error)
if m:
result = 'fail in %s' % m.group('p')
else:
elist[err[0]] += 1
for i in elist:
ilist.append('%sx%d' % (i, elist[i]) if elist[i] > 1 else i)
+ wifi = find_in_html(html, 'Wifi Resume: ', '</td>')
+ if wifi:
+ extra['wifi'] = wifi
low = find_in_html(html, 'freeze time: <b>', ' ms</b>')
if low and '|' in low:
issue = 'FREEZEx%d' % len(low.split('|'))
for dirname, dirnames, filenames in os.walk(subdir):
sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = ''
for filename in filenames:
- if(re.match('.*_dmesg.txt', filename)):
- sysvals.dmesgfile = os.path.join(dirname, filename)
- elif(re.match('.*_ftrace.txt', filename)):
- sysvals.ftracefile = os.path.join(dirname, filename)
+ file = os.path.join(dirname, filename)
+ if sysvals.usable(file):
+ if(re.match('.*_dmesg.txt', filename)):
+ sysvals.dmesgfile = file
+ elif(re.match('.*_ftrace.txt', filename)):
+ sysvals.ftracefile = file
sysvals.setOutputFile()
- if sysvals.ftracefile and sysvals.htmlfile and \
- (force or not os.path.exists(sysvals.htmlfile)):
+ if (sysvals.dmesgfile or sysvals.ftracefile) and sysvals.htmlfile and \
+ (force or not sysvals.usable(sysvals.htmlfile)):
pprint('FTRACE: %s' % sysvals.ftracefile)
if sysvals.dmesgfile:
pprint('DMESG : %s' % sysvals.dmesgfile)
sysvals.cgtest = getArgInt('cgtest', value, 0, 1, False)
elif(option == 'cgphase'):
d = Data(0)
- if value not in d.sortedPhases():
+ if value not in d.phasedef:
doError('invalid phase --> (%s: %s), valid phases are %s'\
- % (option, value, d.sortedPhases()), True)
+ % (option, value, d.phasedef.keys()), True)
sysvals.cgphase = value
elif(option == 'fadd'):
file = sysvals.configFile(value)
nums = value.split()
if len(nums) != 2:
doError('multi requires 2 integers (exec_count and delay)', True)
- sysvals.multitest['run'] = True
- sysvals.multitest['count'] = getArgInt('multi: n d (exec count)', nums[0], 2, 1000000, False)
- sysvals.multitest['delay'] = getArgInt('multi: n d (delay between tests)', nums[1], 0, 3600, False)
+ sysvals.multiinit(nums[0], nums[1])
elif(option == 'devicefilter'):
sysvals.setDeviceFilter(value)
elif(option == 'expandcg'):
' -srgap Add a visible gap in the timeline between sus/res (default: disabled)\n'\
' -skiphtml Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\
' -result fn Export a results table to a text file for parsing.\n'\
+ ' -wifi If a wifi connection is available, check that it reconnects after resume.\n'\
' [testprep]\n'\
' -sync Sync the filesystems before starting the test\n'\
' -rs on/off Enable/disable runtime suspend for all devices, restore all after test\n'\
' -predelay t Include t ms delay before 1st suspend (default: 0 ms)\n'\
' -postdelay t Include t ms delay after last resume (default: 0 ms)\n'\
' -mindev ms Discard all device blocks shorter than ms milliseconds (e.g. 0.001 for us)\n'\
- ' -multi n d Execute <n> consecutive tests at <d> seconds intervals. The outputs will\n'\
- ' be created in a new subdirectory with a summary page.\n'\
+ ' -multi n d Execute <n> consecutive tests at <d> seconds intervals. If <n> is followed\n'\
+ ' by a "d", "h", or "m" execute for <n> days, hours, or mins instead.\n'\
+ ' The outputs will be created in a new subdirectory with a summary page.\n'\
+ ' -maxfail n Abort a -multi run after n consecutive fails (default is 0 = never abort)\n'\
' [debug]\n'\
' -f Use ftrace to create device callgraphs (default: disabled)\n'\
' -ftop Use ftrace on the top level call: "%s" (default: disabled)\n'\
' -modes List available suspend modes\n'\
' -status Test to see if the system is enabled to run this tool\n'\
' -fpdt Print out the contents of the ACPI Firmware Performance Data Table\n'\
- ' -battery Print out battery info (if available)\n'\
- ' -wifi Print out wifi connection info (if wireless-tools and device exists)\n'\
+ ' -wificheck Print out wifi connection info\n'\
' -x<mode> Test xset by toggling the given mode (on/off/standby/suspend)\n'\
' -sysinfo Print out system info extracted from BIOS\n'\
' -devinfo Print out the pm settings of all devices which support runtime suspend\n'\
+ ' -cmdinfo Print out all the platform info collected before and after suspend/resume\n'\
' -flist Print the list of functions currently being captured in ftrace\n'\
' -flistall Print all functions capable of being captured in ftrace\n'\
' -summary dir Create a summary of tests in this dir [-genhtml builds missing html]\n'\
genhtml = False
cmd = ''
simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall',
- '-devinfo', '-status', '-battery', '-xon', '-xoff', '-xstandby',
- '-xsuspend', '-xinit', '-xreset', '-xstat', '-wifi']
+ '-devinfo', '-status', '-xon', '-xoff', '-xstandby', '-xsuspend',
+ '-xinit', '-xreset', '-xstat', '-wificheck', '-cmdinfo']
if '-f' in sys.argv:
sysvals.cgskip = sysvals.configFile('cgskip.txt')
# loop through the command line arguments
sysvals.usedevsrc = True
elif(arg == '-sync'):
sysvals.sync = True
+ elif(arg == '-wifi'):
+ sysvals.wifi = True
elif(arg == '-gzip'):
sysvals.gzip = True
+ elif(arg == '-info'):
+ try:
+ val = next(args)
+ except:
+ doError('-info requires one string argument', True)
elif(arg == '-rs'):
try:
val = next(args)
sysvals.cgexp = True
elif(arg == '-srgap'):
sysvals.srgap = 5
+ elif(arg == '-maxfail'):
+ sysvals.maxfail = getArgInt('-maxfail', args, 0, 1000000)
elif(arg == '-multi'):
- sysvals.multitest['run'] = True
- sysvals.multitest['count'] = getArgInt('-multi n d (exec count)', args, 2, 1000000)
- sysvals.multitest['delay'] = getArgInt('-multi n d (delay between tests)', args, 0, 3600)
+ try:
+ c, d = next(args), next(args)
+ except:
+ doError('-multi requires two values', True)
+ sysvals.multiinit(c, d)
elif(arg == '-o'):
try:
val = next(args)
elif(cmd == 'fpdt'):
if not getFPDT(True):
ret = 1
- elif(cmd == 'battery'):
- out = getBattery()
- if out:
- pprint('AC Connect : %s\nBattery Charge: %d' % out)
- else:
- pprint('no battery found')
- ret = 1
elif(cmd == 'sysinfo'):
sysvals.printSystemInfo(True)
elif(cmd == 'devinfo'):
ret = displayControl(cmd[1:])
elif(cmd == 'xstat'):
pprint('Display Status: %s' % displayControl('stat').upper())
- elif(cmd == 'wifi'):
- out = sysvals.checkWifi()
- if 'device' not in out:
- pprint('WIFI interface not found')
+ elif(cmd == 'wificheck'):
+ dev = sysvals.checkWifi()
+ if dev:
+ print('%s is connected' % sysvals.wifiDetails(dev))
else:
- for key in sorted(out):
- pprint('%6s: %s' % (key.upper(), out[key]))
+ print('No wifi connection found')
+ elif(cmd == 'cmdinfo'):
+ for out in sysvals.cmdinfo(False, True):
+ print('[%s - %s]\n%s\n' % out)
sys.exit(ret)
# if instructed, re-analyze existing data files
setRuntimeSuspend(True)
if sysvals.display:
displayControl('init')
- ret = 0
+ failcnt, ret = 0, 0
if sysvals.multitest['run']:
# run multiple tests in a separate subdirectory
if not sysvals.outdir:
- s = 'suspend-x%d' % sysvals.multitest['count']
- sysvals.outdir = datetime.now().strftime(s+'-%y%m%d-%H%M%S')
+ if 'time' in sysvals.multitest:
+ s = '-%dm' % sysvals.multitest['time']
+ else:
+ s = '-x%d' % sysvals.multitest['count']
+ sysvals.outdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S'+s)
if not os.path.isdir(sysvals.outdir):
os.makedirs(sysvals.outdir)
+ sysvals.sudoUserchown(sysvals.outdir)
+ finish = datetime.now()
+ if 'time' in sysvals.multitest:
+ finish += timedelta(minutes=sysvals.multitest['time'])
for i in range(sysvals.multitest['count']):
- if(i != 0):
+ sysvals.multistat(True, i, finish)
+ if i != 0 and sysvals.multitest['delay'] > 0:
pprint('Waiting %d seconds...' % (sysvals.multitest['delay']))
time.sleep(sysvals.multitest['delay'])
- pprint('TEST (%d/%d) START' % (i+1, sysvals.multitest['count']))
fmt = 'suspend-%y%m%d-%H%M%S'
sysvals.testdir = os.path.join(sysvals.outdir, datetime.now().strftime(fmt))
- ret = runTest(i+1)
- pprint('TEST (%d/%d) COMPLETE' % (i+1, sysvals.multitest['count']))
- sysvals.logmsg = ''
+ ret = runTest(i+1, True)
+ failcnt = 0 if not ret else failcnt + 1
+ if sysvals.maxfail > 0 and failcnt >= sysvals.maxfail:
+ pprint('Maximum fail count of %d reached, aborting multitest' % (sysvals.maxfail))
+ break
+ time.sleep(5)
+ sysvals.resetlog()
+ sysvals.multistat(False, i, finish)
+ if 'time' in sysvals.multitest and datetime.now() >= finish:
+ break
if not sysvals.skiphtml:
runSummary(sysvals.outdir, False, False)
sysvals.sudoUserchown(sysvals.outdir)
static void test_fexit_bpf2bpf_common(const char *obj_file,
const char *target_obj_file,
int prog_cnt,
- const char **prog_name)
+ const char **prog_name,
+ bool run_prog)
{
struct bpf_object *obj = NULL, *pkt_obj;
int err, pkt_fd, i;
err = bpf_prog_load(target_obj_file, BPF_PROG_TYPE_UNSPEC,
&pkt_obj, &pkt_fd);
- if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
+ if (CHECK(err, "tgt_prog_load", "file %s err %d errno %d\n",
+ target_obj_file, err, errno))
return;
DECLARE_LIBBPF_OPTS(bpf_object_open_opts, opts,
.attach_prog_fd = pkt_fd,
obj = bpf_object__open_file(obj_file, &opts);
if (CHECK(IS_ERR_OR_NULL(obj), "obj_open",
- "failed to open fexit_bpf2bpf: %ld\n",
+ "failed to open %s: %ld\n", obj_file,
PTR_ERR(obj)))
goto close_prog;
if (CHECK(IS_ERR(link[i]), "attach_trace", "failed to link\n"))
goto close_prog;
}
+
+ if (!run_prog)
+ goto close_prog;
+
data_map = bpf_object__find_map_by_name(obj, "fexit_bp.bss");
if (CHECK(!data_map, "find_data_map", "data map not found\n"))
goto close_prog;
test_fexit_bpf2bpf_common("./fexit_bpf2bpf_simple.o",
"./test_pkt_md_access.o",
ARRAY_SIZE(prog_name),
- prog_name);
+ prog_name, true);
}
static void test_target_yes_callees(void)
test_fexit_bpf2bpf_common("./fexit_bpf2bpf.o",
"./test_pkt_access.o",
ARRAY_SIZE(prog_name),
- prog_name);
+ prog_name, true);
}
static void test_func_replace(void)
test_fexit_bpf2bpf_common("./fexit_bpf2bpf.o",
"./test_pkt_access.o",
ARRAY_SIZE(prog_name),
- prog_name);
+ prog_name, true);
+}
+
+static void test_func_replace_verify(void)
+{
+ const char *prog_name[] = {
+ "freplace/do_bind",
+ };
+ test_fexit_bpf2bpf_common("./freplace_connect4.o",
+ "./connect4_prog.o",
+ ARRAY_SIZE(prog_name),
+ prog_name, false);
}
void test_fexit_bpf2bpf(void)
test_target_no_callees();
test_target_yes_callees();
test_func_replace();
+ test_func_replace_verify();
}
int _version SEC("version") = 1;
+__attribute__ ((noinline))
+int do_bind(struct bpf_sock_addr *ctx)
+{
+ struct sockaddr_in sa = {};
+
+ sa.sin_family = AF_INET;
+ sa.sin_port = bpf_htons(0);
+ sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);
+
+ if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
+ return 0;
+
+ return 1;
+}
+
SEC("cgroup/connect4")
int connect_v4_prog(struct bpf_sock_addr *ctx)
{
struct bpf_sock_tuple tuple = {};
- struct sockaddr_in sa;
struct bpf_sock *sk;
/* Verify that new destination is available. */
ctx->user_ip4 = bpf_htonl(DST_REWRITE_IP4);
ctx->user_port = bpf_htons(DST_REWRITE_PORT4);
- /* Rewrite source. */
- memset(&sa, 0, sizeof(sa));
-
- sa.sin_family = AF_INET;
- sa.sin_port = bpf_htons(0);
- sa.sin_addr.s_addr = bpf_htonl(SRC_REWRITE_IP4);
-
- if (bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa)) != 0)
- return 0;
-
- return 1;
+ return do_bind(ctx) ? 1 : 0;
}
char _license[] SEC("license") = "GPL";
--- /dev/null
+#include <linux/stddef.h>
+#include <linux/ipv6.h>
+#include <linux/bpf.h>
+#include <linux/in.h>
+#include <sys/socket.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_endian.h>
+
+SEC("freplace/do_bind")
+int new_do_bind(struct bpf_sock_addr *ctx)
+{
+ struct sockaddr_in sa = {};
+
+ bpf_bind(ctx, (struct sockaddr *)&sa, sizeof(sa));
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
BPF_ANNOTATE_KV_PAIR(btf_map, int, struct ipv_counts);
-struct dummy_tracepoint_args {
- unsigned long long pad;
- struct sock *sock;
-};
-
__attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
{
struct ipv_counts *counts;
int key = 0;
- if (!arg->sock)
- return 0;
-
counts = bpf_map_lookup_elem(&btf_map, &key);
if (!counts)
return 0;
}
__attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
{
- return test_long_fname_2(arg);
+ return test_long_fname_2();
}
SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
{
- return test_long_fname_1(arg);
+ return test_long_fname_1();
}
char _license[] SEC("license") = "GPL";
__type(value, struct ipv_counts);
} btf_map SEC(".maps");
-struct dummy_tracepoint_args {
- unsigned long long pad;
- struct sock *sock;
-};
-
__attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
{
struct ipv_counts *counts;
int key = 0;
- if (!arg->sock)
- return 0;
-
counts = bpf_map_lookup_elem(&btf_map, &key);
if (!counts)
return 0;
}
__attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
{
- return test_long_fname_2(arg);
+ return test_long_fname_2();
}
SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
{
- return test_long_fname_1(arg);
+ return test_long_fname_1();
}
char _license[] SEC("license") = "GPL";
.max_entries = 4,
};
-struct dummy_tracepoint_args {
- unsigned long long pad;
- struct sock *sock;
-};
-
__attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
{
struct ipv_counts *counts;
int key = 0;
- if (!arg->sock)
- return 0;
-
counts = bpf_map_lookup_elem(&btf_map, &key);
if (!counts)
return 0;
}
__attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
{
- return test_long_fname_2(arg);
+ return test_long_fname_2();
}
SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
{
- return test_long_fname_1(arg);
+ return test_long_fname_1();
}
char _license[] SEC("license") = "GPL";
.value_type_id = 1,
.max_entries = 4,
.btf_load_err = true,
- .err_str = "vlen != 0",
+ .err_str = "Invalid func linkage",
},
{
},
.result = ACCEPT,
},
+{
+ "store PTR_TO_STACK in R10 to array map using BPF_B",
+ .insns = {
+ /* Load pointer to map. */
+ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+ BPF_ST_MEM(BPF_DW, BPF_REG_2, 0, 0),
+ BPF_LD_MAP_FD(BPF_REG_1, 0),
+ BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
+ BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 2),
+ BPF_EXIT_INSN(),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+ /* Copy R10 to R9. */
+ BPF_MOV64_REG(BPF_REG_9, BPF_REG_10),
+ /* Pollute other registers with unaligned values. */
+ BPF_MOV64_IMM(BPF_REG_2, -1),
+ BPF_MOV64_IMM(BPF_REG_3, -1),
+ BPF_MOV64_IMM(BPF_REG_4, -1),
+ BPF_MOV64_IMM(BPF_REG_5, -1),
+ BPF_MOV64_IMM(BPF_REG_6, -1),
+ BPF_MOV64_IMM(BPF_REG_7, -1),
+ BPF_MOV64_IMM(BPF_REG_8, -1),
+ /* Store both R9 and R10 with BPF_B and read back. */
+ BPF_STX_MEM(BPF_B, BPF_REG_1, BPF_REG_10, 0),
+ BPF_LDX_MEM(BPF_B, BPF_REG_2, BPF_REG_1, 0),
+ BPF_STX_MEM(BPF_B, BPF_REG_1, BPF_REG_9, 0),
+ BPF_LDX_MEM(BPF_B, BPF_REG_3, BPF_REG_1, 0),
+ /* Should read back as same value. */
+ BPF_JMP_REG(BPF_JEQ, BPF_REG_2, BPF_REG_3, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 1),
+ BPF_EXIT_INSN(),
+ BPF_MOV64_IMM(BPF_REG_0, 42),
+ BPF_EXIT_INSN(),
+ },
+ .fixup_map_array_48b = { 3 },
+ .result = ACCEPT,
+ .retval = 42,
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+},
BPF_EXIT_INSN(),
},
.fixup_map_hash_48b = { 3 },
+ .errstr_unpriv = "leaking pointer from stack off -8",
.errstr = "R0 invalid mem access 'inv'",
.result = REJECT,
.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_SAMPLES=y
+CONFIG_SAMPLE_FTRACE_DIRECT=m
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_KALLSYMS_ALL=y
for (kern_id = 0; kern_id < 256; kern_id++) {
ret = msgctl(kern_id, MSG_STAT, &ds);
if (ret < 0) {
- if (errno == -EINVAL)
+ if (errno == EINVAL)
continue;
printf("Failed to get stats for IPC queue with id %d\n",
kern_id);
{
# Make sure tests will time out if utility is available.
if [ -x /usr/bin/timeout ] ; then
- /usr/bin/timeout "$kselftest_timeout" "$1"
+ /usr/bin/timeout --foreground "$kselftest_timeout" "$1"
else
"$1"
fi
/* Sanity check handler execution environment. */
if (!t) {
fprintf(TH_LOG_STREAM,
- "no active test in SIGARLM handler!?\n");
+ "no active test in SIGALRM handler!?\n");
abort();
}
if (sig != SIGALRM || sig != info->si_signo) {
if (sigaction(SIGALRM, &action, &saved_action)) {
t->passed = 0;
fprintf(TH_LOG_STREAM,
- "%s: unable to install SIGARLM handler\n",
+ "%s: unable to install SIGALRM handler\n",
t->name);
return;
}
if (sigaction(SIGALRM, &saved_action, NULL)) {
t->passed = 0;
fprintf(TH_LOG_STREAM,
- "%s: unable to uninstall SIGARLM handler\n",
+ "%s: unable to uninstall SIGALRM handler\n",
t->name);
return;
}
CFLAGS += -I../../../../include/
CFLAGS += -I../../../../usr/include/
-TEST_GEN_PROGS := memfd_test fuse_test fuse_mnt
+TEST_GEN_PROGS := memfd_test
TEST_PROGS := run_fuse_test.sh run_hugetlbfs_test.sh
+TEST_GEN_FILES := fuse_test fuse_mnt
fuse_mnt.o: CFLAGS += $(shell pkg-config fuse --cflags)
run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
log_test $? 0 "Ping - multipath"
+ run_cmd "$IP ro delete 172.16.101.1/32 nhid 122"
+
+ #
+ # multiple default routes
+ # - tests fib_select_default
+ run_cmd "$IP nexthop add id 501 via 172.16.1.2 dev veth1"
+ run_cmd "$IP ro add default nhid 501"
+ run_cmd "$IP ro add default via 172.16.1.3 dev veth1 metric 20"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "Ping - multiple default routes, nh first"
+
+ # flip the order
+ run_cmd "$IP ro del default nhid 501"
+ run_cmd "$IP ro del default via 172.16.1.3 dev veth1 metric 20"
+ run_cmd "$IP ro add default via 172.16.1.2 dev veth1 metric 20"
+ run_cmd "$IP nexthop replace id 501 via 172.16.1.3 dev veth1"
+ run_cmd "$IP ro add default nhid 501 metric 20"
+ run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+ log_test $? 0 "Ping - multiple default routes, nh second"
+
+ run_cmd "$IP nexthop delete nhid 501"
+ run_cmd "$IP ro del default"
+
#
# IPv4 with blackhole nexthops
#
fib_suppress_test()
{
+ echo
+ echo "FIB rule with suppress_prefixlength"
+ setup
+
$IP link add dummy1 type dummy
$IP link set dummy1 up
$IP -6 route add default dev dummy1
$IP -6 rule add table main suppress_prefixlength 0
- ping -f -c 1000 -W 1 1234::1 || true
+ ping -f -c 1000 -W 1 1234::1 >/dev/null 2>&1
$IP -6 rule del table main suppress_prefixlength 0
$IP link del dummy1
# If we got here without crashing, we're good.
- return 0
+ log_test 0 0 "FIB rule suppress test"
+
+ cleanup
}
################################################################################
offsetof(struct seccomp_data, nr)),
#ifdef __NR_sigreturn
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_sigreturn, 6, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_sigreturn, 7, 0),
#endif
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_read, 5, 0),
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_exit, 4, 0),
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_rt_sigreturn, 3, 0),
- BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_nanosleep, 4, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_read, 6, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_exit, 5, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_rt_sigreturn, 4, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_nanosleep, 5, 0),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_clock_nanosleep, 4, 0),
BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_restart_syscall, 4, 0),
/* Allow __NR_write for easy logging. */
ASSERT_EQ(PTRACE_EVENT_SECCOMP, (status >> 16));
ASSERT_EQ(0, ptrace(PTRACE_GETEVENTMSG, child_pid, NULL, &msg));
ASSERT_EQ(0x100, msg);
- EXPECT_EQ(__NR_nanosleep, get_syscall(_metadata, child_pid));
+ ret = get_syscall(_metadata, child_pid);
+ EXPECT_TRUE(ret == __NR_nanosleep || ret == __NR_clock_nanosleep);
/* Might as well check siginfo for sanity while we're here. */
ASSERT_EQ(0, ptrace(PTRACE_GETSIGINFO, child_pid, NULL, &info));
#!/bin/bash
# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-self.flags = flags
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-
-if [ -f /dev/tpm0 ] ; then
- python -m unittest -v tpm2_tests.SmokeTest
- python -m unittest -v tpm2_tests.AsyncTest
-else
- exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SmokeTest
+python -m unittest -v tpm2_tests.AsyncTest
CLEAR_CMD=$(which tpm2_clear)
if [ -n $CLEAR_CMD ]; then
#!/bin/bash
# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-if [ -f /dev/tpmrm0 ] ; then
- python -m unittest -v tpm2_tests.SpaceTest
-else
- exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SpaceTest
# SPDX-License-Identifier: GPL-2.0
# Makefile for vm selftests
uname_M := $(shell uname -m 2>/dev/null || echo not)
-ARCH ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
+MACHINE ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
LDLIBS = -lrt
TEST_GEN_FILES += transhuge-stress
TEST_GEN_FILES += userfaultfd
-ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
+ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64))
TEST_GEN_FILES += va_128TBswitch
TEST_GEN_FILES += virtual_address_range
TEST_GEN_FILES += write_to_hugetlbfs
fi
#filter 64bit architectures
-ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64"
+ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
if [ -z $ARCH ]; then
ARCH=`uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/'`
fi
virtio_test: virtio_ring.o virtio_test.o
vringh_test: vringh_test.o vringh.o virtio_ring.o
-CFLAGS += -g -O2 -Werror -Wall -I. -I../include/ -I ../../usr/include/ -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE
+CFLAGS += -g -O2 -Werror -Wall -I. -I../include/ -I ../../usr/include/ -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE -include ../../include/linux/kconfig.h
vpath %.c ../../drivers/virtio ../../drivers/vhost
mod:
${MAKE} -C `pwd`/../.. M=`pwd`/vhost_test V=${V}
CONFIG_VHOST=m \
CONFIG_VHOST_NET=n \
CONFIG_VHOST_SCSI=n \
- CONFIG_VHOST_VSOCK=n
+ CONFIG_VHOST_VSOCK=n \
+ CONFIG_VHOST_RING=n
OOT_BUILD=KCFLAGS="-I "${OOT_VHOST} ${MAKE} -C ${OOT_KSRC} V=${V}
oot-build:
echo "UNSUPPORTED! Don't use the resulting modules in production!"
/* SPDX-License-Identifier: GPL-2.0 */
+#include <stdlib.h>
#if defined(__i386__) || defined(__x86_64__)
#define barrier() asm volatile("" ::: "memory")
#define virt_mb() __sync_synchronize()
#define READ_ONCE(var) (*((volatile typeof(var) *)(&(var))))
+#define __aligned(x) __attribute((__aligned__(x)))
#endif
# SPDX-License-Identifier: GPL-2.0
# Makefile for vm tools
#
+include ../scripts/Makefile.include
+
TARGETS=page-types slabinfo page_owner_sort
LIB_DIR = ../lib/api
projects / thirdparty / linux.git / commitdiff
