switch (tag->u.acorn.vram_pages) {
case 512:
vram_size += PAGE_SIZE * 256;
+ /* Fall through - ??? */
case 256:
vram_size += PAGE_SIZE * 256;
default:
case OCTEON_CN78XX & OCTEON_FAMILY_MASK:
if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
return 0x0000000000003CB0ull;
+ /* Else, fall through */
default:
return 0x0000000000023CB0ull;
}
switch (chan->feature & FSL_DMA_IP_MASK) {
case FSL_DMA_IP_85XX:
chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
+ /* Fall through */
case FSL_DMA_IP_83XX:
chan->toggle_ext_start = fsl_chan_toggle_ext_start;
chan->set_src_loop_size = fsl_chan_set_src_loop_size;
/* R and B components are only 5 bits deep */
val |= SUN4I_TCON0_FRM_CTL_MODE_R;
val |= SUN4I_TCON0_FRM_CTL_MODE_B;
+ /* Fall through */
case MEDIA_BUS_FMT_RGB666_1X18:
case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
/* Fall through: enable dithering */
ret = sun6i_dsi_dcs_read(dsi, msg);
break;
}
+ /* Else, fall through */
default:
ret = -EINVAL;
default:
printk(KERN_WARNING "SA1100 flash: unknown base address "
"0x%08lx, assuming CS0\n", phys);
+ /* Fall through */
case SA1100_CS0_PHYS:
subdev->map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
USB_CH_IP_CUR_LVL_1P5;
break;
}
+ /* Else, fall through */
case USB_STAT_HM_IDGND:
dev_err(di->dev, "USB Type - Charging not allowed\n");
di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
/* Fall through */
#endif
+ /* Fall through - only for the #else condition above. */
default:
error = -ENXIO;
pr_err("unhandled device %d\n", dev->dev_type);
case 'M':
case 'm':
size *= 1024;
+ /* Fall through */
case 'K':
case 'k':
size *= 1024;
soft_margin = new_margin;
reload = soft_margin * (mem_fclk_21285 / 256);
watchdog_ping();
- /* Fall */
+ /* Fall through */
case WDIOC_GETTIMEOUT:
ret = put_user(soft_margin, int_arg);
break;