struct module;
struct device;
-/* Opaque type for a IPMI message user. One of these is needed to
- send and receive messages. */
+/*
+ * Opaque type for a IPMI message user. One of these is needed to
+ * send and receive messages.
+ */
typedef struct ipmi_user *ipmi_user_t;
/*
struct ipmi_recv_msg {
struct list_head link;
- /* The type of message as defined in the "Receive Types"
- defines above. */
+ /*
+ * The type of message as defined in the "Receive Types"
+ * defines above.
+ */
int recv_type;
ipmi_user_t user;
long msgid;
struct kernel_ipmi_msg msg;
- /* The user_msg_data is the data supplied when a message was
- sent, if this is a response to a sent message. If this is
- not a response to a sent message, then user_msg_data will
- be NULL. If the user above is NULL, then this will be the
- intf. */
+ /*
+ * The user_msg_data is the data supplied when a message was
+ * sent, if this is a response to a sent message. If this is
+ * not a response to a sent message, then user_msg_data will
+ * be NULL. If the user above is NULL, then this will be the
+ * intf.
+ */
void *user_msg_data;
- /* Call this when done with the message. It will presumably free
- the message and do any other necessary cleanup. */
+ /*
+ * Call this when done with the message. It will presumably free
+ * the message and do any other necessary cleanup.
+ */
void (*done)(struct ipmi_recv_msg *msg);
- /* Place-holder for the data, don't make any assumptions about
- the size or existence of this, since it may change. */
+ /*
+ * Place-holder for the data, don't make any assumptions about
+ * the size or existence of this, since it may change.
+ */
unsigned char msg_data[IPMI_MAX_MSG_LENGTH];
};
void ipmi_free_recv_msg(struct ipmi_recv_msg *msg);
struct ipmi_user_hndl {
- /* Routine type to call when a message needs to be routed to
- the upper layer. This will be called with some locks held,
- the only IPMI routines that can be called are ipmi_request
- and the alloc/free operations. The handler_data is the
- variable supplied when the receive handler was registered. */
+ /*
+ * Routine type to call when a message needs to be routed to
+ * the upper layer. This will be called with some locks held,
+ * the only IPMI routines that can be called are ipmi_request
+ * and the alloc/free operations. The handler_data is the
+ * variable supplied when the receive handler was registered.
+ */
void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,
void *user_msg_data);
- /* Called when the interface detects a watchdog pre-timeout. If
- this is NULL, it will be ignored for the user. */
+ /*
+ * Called when the interface detects a watchdog pre-timeout. If
+ * this is NULL, it will be ignored for the user.
+ */
void (*ipmi_watchdog_pretimeout)(void *handler_data);
/*
void *handler_data,
ipmi_user_t *user);
-/* Destroy the given user of the IPMI layer. Note that after this
- function returns, the system is guaranteed to not call any
- callbacks for the user. Thus as long as you destroy all the users
- before you unload a module, you will be safe. And if you destroy
- the users before you destroy the callback structures, it should be
- safe, too. */
+/*
+ * Destroy the given user of the IPMI layer. Note that after this
+ * function returns, the system is guaranteed to not call any
+ * callbacks for the user. Thus as long as you destroy all the users
+ * before you unload a module, you will be safe. And if you destroy
+ * the users before you destroy the callback structures, it should be
+ * safe, too.
+ */
int ipmi_destroy_user(ipmi_user_t user);
/* Get the IPMI version of the BMC we are talking to. */
unsigned char *major,
unsigned char *minor);
-/* Set and get the slave address and LUN that we will use for our
- source messages. Note that this affects the interface, not just
- this user, so it will affect all users of this interface. This is
- so some initialization code can come in and do the OEM-specific
- things it takes to determine your address (if not the BMC) and set
- it for everyone else. Note that each channel can have its own address. */
+/*
+ * Set and get the slave address and LUN that we will use for our
+ * source messages. Note that this affects the interface, not just
+ * this user, so it will affect all users of this interface. This is
+ * so some initialization code can come in and do the OEM-specific
+ * things it takes to determine your address (if not the BMC) and set
+ * it for everyone else. Note that each channel can have its own
+ * address.
+ */
int ipmi_set_my_address(ipmi_user_t user,
unsigned int channel,
unsigned char address);
struct ipmi_smi_watcher {
struct list_head link;
- /* You must set the owner to the current module, if you are in
- a module (generally just set it to "THIS_MODULE"). */
+ /*
+ * You must set the owner to the current module, if you are in
+ * a module (generally just set it to "THIS_MODULE").
+ */
struct module *owner;
- /* These two are called with read locks held for the interface
- the watcher list. So you can add and remove users from the
- IPMI interface, send messages, etc., but you cannot add
- or remove SMI watchers or SMI interfaces. */
+ /*
+ * These two are called with read locks held for the interface
+ * the watcher list. So you can add and remove users from the
+ * IPMI interface, send messages, etc., but you cannot add
+ * or remove SMI watchers or SMI interfaces.
+ */
void (*new_smi)(int if_num, struct device *dev);
void (*smi_gone)(int if_num);
};
int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);
int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);
-/* The following are various helper functions for dealing with IPMI
- addresses. */
+/*
+ * The following are various helper functions for dealing with IPMI
+ * addresses.
+ */
/* Return the maximum length of an IPMI address given it's type. */
unsigned int ipmi_addr_length(int addr_type);
struct device;
-/* This files describes the interface for IPMI system management interface
- drivers to bind into the IPMI message handler. */
+/*
+ * This files describes the interface for IPMI system management interface
+ * drivers to bind into the IPMI message handler.
+ */
/* Structure for the low-level drivers. */
typedef struct ipmi_smi *ipmi_smi_t;
struct ipmi_smi_handlers {
struct module *owner;
- /* The low-level interface cannot start sending messages to
- the upper layer until this function is called. This may
- not be NULL, the lower layer must take the interface from
- this call. */
+ /*
+ * The low-level interface cannot start sending messages to
+ * the upper layer until this function is called. This may
+ * not be NULL, the lower layer must take the interface from
+ * this call.
+ */
int (*start_processing)(void *send_info,
ipmi_smi_t new_intf);
*/
int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data);
- /* Called to enqueue an SMI message to be sent. This
- operation is not allowed to fail. If an error occurs, it
- should report back the error in a received message. It may
- do this in the current call context, since no write locks
- are held when this is run. Message are delivered one at
- a time by the message handler, a new message will not be
- delivered until the previous message is returned. */
+ /*
+ * Called to enqueue an SMI message to be sent. This
+ * operation is not allowed to fail. If an error occurs, it
+ * should report back the error in a received message. It may
+ * do this in the current call context, since no write locks
+ * are held when this is run. Message are delivered one at
+ * a time by the message handler, a new message will not be
+ * delivered until the previous message is returned.
+ */
void (*sender)(void *send_info,
struct ipmi_smi_msg *msg);
- /* Called by the upper layer to request that we try to get
- events from the BMC we are attached to. */
+ /*
+ * Called by the upper layer to request that we try to get
+ * events from the BMC we are attached to.
+ */
void (*request_events)(void *send_info);
- /* Called by the upper layer when some user requires that the
- interface watch for events, received messages, watchdog
- pretimeouts, or not. Used by the SMI to know if it should
- watch for these. This may be NULL if the SMI does not
- implement it. */
+ /*
+ * Called by the upper layer when some user requires that the
+ * interface watch for events, received messages, watchdog
+ * pretimeouts, or not. Used by the SMI to know if it should
+ * watch for these. This may be NULL if the SMI does not
+ * implement it.
+ */
void (*set_need_watch)(void *send_info, bool enable);
/*
*/
void (*flush_messages)(void *send_info);
- /* Called when the interface should go into "run to
- completion" mode. If this call sets the value to true, the
- interface should make sure that all messages are flushed
- out and that none are pending, and any new requests are run
- to completion immediately. */
+ /*
+ * Called when the interface should go into "run to
+ * completion" mode. If this call sets the value to true, the
+ * interface should make sure that all messages are flushed
+ * out and that none are pending, and any new requests are run
+ * to completion immediately.
+ */
void (*set_run_to_completion)(void *send_info, bool run_to_completion);
- /* Called to poll for work to do. This is so upper layers can
- poll for operations during things like crash dumps. */
+ /*
+ * Called to poll for work to do. This is so upper layers can
+ * poll for operations during things like crash dumps.
+ */
void (*poll)(void *send_info);
- /* Enable/disable firmware maintenance mode. Note that this
- is *not* the modes defined, this is simply an on/off
- setting. The message handler does the mode handling. Note
- that this is called from interrupt context, so it cannot
- block. */
+ /*
+ * Enable/disable firmware maintenance mode. Note that this
+ * is *not* the modes defined, this is simply an on/off
+ * setting. The message handler does the mode handling. Note
+ * that this is called from interrupt context, so it cannot
+ * block.
+ */
void (*set_maintenance_mode)(void *send_info, bool enable);
- /* Tell the handler that we are using it/not using it. The
- message handler get the modules that this handler belongs
- to; this function lets the SMI claim any modules that it
- uses. These may be NULL if this is not required. */
+ /*
+ * Tell the handler that we are using it/not using it. The
+ * message handler get the modules that this handler belongs
+ * to; this function lets the SMI claim any modules that it
+ * uses. These may be NULL if this is not required.
+ */
int (*inc_usecount)(void *send_info);
void (*dec_usecount)(void *send_info);
};
#define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
#define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
-/* Take a pointer to an IPMI response and extract device id information from
+/*
+ * Take a pointer to an IPMI response and extract device id information from
* it. @netfn is in the IPMI_NETFN_ format, so may need to be shifted from
* a SI response.
*/
return 0;
}
-/* Add a low-level interface to the IPMI driver. Note that if the
- interface doesn't know its slave address, it should pass in zero.
- The low-level interface should not deliver any messages to the
- upper layer until the start_processing() function in the handlers
- is called, and the lower layer must get the interface from that
- call. */
+/*
+ * Add a low-level interface to the IPMI driver. Note that if the
+ * interface doesn't know its slave address, it should pass in zero.
+ * The low-level interface should not deliver any messages to the
+ * upper layer until the start_processing() function in the handlers
+ * is called, and the lower layer must get the interface from that
+ * call.
+ */
int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
void *send_info,
struct device *dev,
}
#ifdef CONFIG_IPMI_PROC_INTERFACE
-/* Allow the lower layer to add things to the proc filesystem
- directory for this interface. Note that the entry will
- automatically be dstroyed when the interface is destroyed. */
+/*
+ * Allow the lower layer to add things to the proc filesystem
+ * directory for this interface. Note that the entry will
+ * automatically be dstroyed when the interface is destroyed.
+ */
int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
const struct file_operations *proc_ops,
void *data);
projects / thirdparty / linux.git / commitdiff
