clock-names:
items:
+ # Tegra clock of the same name
- const: pclk
+ # 32 KHz clock input
- const: clk32k_in
- description:
- Must includes entries pclk and clk32k_in.
- pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
- input to Tegra.
clocks:
maxItems: 2
'#clock-cells':
const: 1
- description:
- Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
- PMC also has blink control which allows 32Khz clock output to
- Tegra blink pad.
- Consumer of PMC clock should specify the desired clock by having
- the clock ID in its "clocks" phandle cell with pmc clock provider.
- See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
- clock IDs.
+ description: |
+ Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. PMC also has blink
+ control which allows 32Khz clock output to Tegra blink pad.
+
+ Consumer of PMC clock should specify the desired clock by having the
+ clock ID in its "clocks" phandle cell with PMC clock provider. See
+ include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC clock IDs.
'#interrupt-cells':
const: 2
- description:
- Specifies number of cells needed to encode an interrupt source.
- The value must be 2.
+ description: Specifies number of cells needed to encode an interrupt
+ source.
interrupt-controller: true
nvidia,invert-interrupt:
$ref: /schemas/types.yaml#/definitions/flag
- description: Inverts the PMU interrupt signal.
- The PMU is an external Power Management Unit, whose interrupt output
- signal is fed into the PMC. This signal is optionally inverted, and
- then fed into the ARM GIC. The PMC is not involved in the detection
- or handling of this interrupt signal, merely its inversion.
+ description: Inverts the PMU interrupt signal. The PMU is an external Power
+ Management Unit, whose interrupt output signal is fed into the PMC. This
+ signal is optionally inverted, and then fed into the ARM GIC. The PMC is
+ not involved in the detection or handling of this interrupt signal,
+ merely its inversion.
nvidia,core-power-req-active-high:
$ref: /schemas/types.yaml#/definitions/flag
- description: Core power request active-high.
+ description: core power request active-high
nvidia,sys-clock-req-active-high:
$ref: /schemas/types.yaml#/definitions/flag
- description: System clock request active-high.
+ description: system clock request active-high
nvidia,combined-power-req:
$ref: /schemas/types.yaml#/definitions/flag
- description: combined power request for CPU and Core.
+ description: combined power request for CPU and core
nvidia,cpu-pwr-good-en:
$ref: /schemas/types.yaml#/definitions/flag
- description:
- CPU power good signal from external PMIC to PMC is enabled.
+ description: CPU power good signal from external PMIC to PMC is enabled
nvidia,suspend-mode:
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
- description:
- The suspend mode that the platform should use.
- Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
- Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
- Mode 2 is for LP2, CPU voltage off
+ description: the suspend mode that the platform should use
+ oneOf:
+ - description: LP0, CPU + Core voltage off and DRAM in self-refresh
+ const: 0
+ - description: LP1, CPU voltage off and DRAM in self-refresh
+ const: 1
+ - description: LP2, CPU voltage off
+ const: 2
nvidia,cpu-pwr-good-time:
$ref: /schemas/types.yaml#/definitions/uint32
- description: CPU power good time in uSec.
+ description: CPU power good time in microseconds
nvidia,cpu-pwr-off-time:
$ref: /schemas/types.yaml#/definitions/uint32
- description: CPU power off time in uSec.
+ description: CPU power off time in microseconds
nvidia,core-pwr-good-time:
$ref: /schemas/types.yaml#/definitions/uint32-array
- description:
- <Oscillator-stable-time Power-stable-time>
- Core power good time in uSec.
+ description: core power good time in microseconds
+ items:
+ - description: oscillator stable time
+ - description: power stable time
nvidia,core-pwr-off-time:
$ref: /schemas/types.yaml#/definitions/uint32
- description: Core power off time in uSec.
+ description: core power off time in microseconds
nvidia,lp0-vec:
$ref: /schemas/types.yaml#/definitions/uint32-array
- description:
- <start length> Starting address and length of LP0 vector.
- The LP0 vector contains the warm boot code that is executed
- by AVP when resuming from the LP0 state.
- The AVP (Audio-Video Processor) is an ARM7 processor and
- always being the first boot processor when chip is power on
- or resume from deep sleep mode. When the system is resumed
- from the deep sleep mode, the warm boot code will restore
- some PLLs, clocks and then brings up CPU0 for resuming the
- system.
+ description: |
+ Starting address and length of LP0 vector. The LP0 vector contains the
+ warm boot code that is executed by AVP when resuming from the LP0 state.
+ The AVP (Audio-Video Processor) is an ARM7 processor and always being
+ the first boot processor when chip is power on or resume from deep sleep
+ mode. When the system is resumed from the deep sleep mode, the warm boot
+ code will restore some PLLs, clocks and then brings up CPU0 for resuming
+ the system.
+ items:
+ - description: starting address of LP0 vector
+ - description: length of LP0 vector
core-supply:
- description:
- Phandle to voltage regulator connected to the SoC Core power rail.
+ description: phandle to voltage regulator connected to the SoC core power
+ rail
core-domain:
type: object
- description: |
- The vast majority of hardware blocks of Tegra SoC belong to a
- Core power domain, which has a dedicated voltage rail that powers
- the blocks.
-
+ description: The vast majority of hardware blocks of Tegra SoC belong to a
+ core power domain, which has a dedicated voltage rail that powers the
+ blocks.
properties:
operating-points-v2:
- description:
- Should contain level, voltages and opp-supported-hw property.
- The supported-hw is a bitfield indicating SoC speedo or process
- ID mask.
+ description: Should contain level, voltages and opp-supported-hw
+ property. The supported-hw is a bitfield indicating SoC speedo or
+ process ID mask.
"#power-domain-cells":
const: 0
i2c-thermtrip:
type: object
- description:
- On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
- hardware-triggered thermal reset will be enabled.
-
+ description: On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode
+ exists, hardware-triggered thermal reset will be enabled.
properties:
nvidia,i2c-controller-id:
$ref: /schemas/types.yaml#/definitions/uint32
- description:
- ID of I2C controller to send poweroff command to PMU.
- Valid values are described in section 9.2.148
- "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
- Manual.
+ description: ID of I2C controller to send poweroff command to PMU.
+ Valid values are described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0"
+ of the Tegra K1 Technical Reference Manual.
nvidia,bus-addr:
$ref: /schemas/types.yaml#/definitions/uint32
- description: Bus address of the PMU on the I2C bus.
+ description: bus address of the PMU on the I2C bus
nvidia,reg-addr:
$ref: /schemas/types.yaml#/definitions/uint32
- description: PMU I2C register address to issue poweroff command.
+ description: PMU I2C register address to issue poweroff command
nvidia,reg-data:
$ref: /schemas/types.yaml#/definitions/uint32
- description: Poweroff command to write to PMU.
+ description: power-off command to write to PMU
nvidia,pinmux-id:
$ref: /schemas/types.yaml#/definitions/uint32
- description:
- Pinmux used by the hardware when issuing Poweroff command.
- Defaults to 0. Valid values are described in section 12.5.2
- "Pinmux Support" of the Tegra4 Technical Reference Manual.
+ description: Pinmux used by the hardware when issuing power-off command.
+ Defaults to 0. Valid values are described in section 12.5.2 "Pinmux
+ Support" of the Tegra4 Technical Reference Manual.
required:
- nvidia,i2c-controller-id
powergates:
type: object
description: |
- This node contains a hierarchy of power domain nodes, which should
- match the powergates on the Tegra SoC. Each powergate node
- represents a power-domain on the Tegra SoC that can be power-gated
- by the Tegra PMC.
- Hardware blocks belonging to a power domain should contain
- "power-domains" property that is a phandle pointing to corresponding
- powergate node.
- The name of the powergate node should be one of the below. Note that
- not every powergate is applicable to all Tegra devices and the following
- list shows which powergates are applicable to which devices.
- Please refer to Tegra TRM for mode details on the powergate nodes to
- use for each power-gate block inside Tegra.
- Name Description Devices Applicable
- 3d 3D Graphics Tegra20/114/124/210
- 3d0 3D Graphics 0 Tegra30
- 3d1 3D Graphics 1 Tegra30
- aud Audio Tegra210
- dfd Debug Tegra210
- dis Display A Tegra114/124/210
- disb Display B Tegra114/124/210
- heg 2D Graphics Tegra30/114/124/210
- iram Internal RAM Tegra124/210
- mpe MPEG Encode All
- nvdec NVIDIA Video Decode Engine Tegra210
- nvjpg NVIDIA JPEG Engine Tegra210
- pcie PCIE Tegra20/30/124/210
- sata SATA Tegra30/124/210
- sor Display interfaces Tegra124/210
- ve2 Video Encode Engine 2 Tegra210
- venc Video Encode Engine All
- vdec Video Decode Engine Tegra20/30/114/124
- vic Video Imaging Compositor Tegra124/210
- xusba USB Partition A Tegra114/124/210
- xusbb USB Partition B Tegra114/124/210
- xusbc USB Partition C Tegra114/124/210
+ This node contains a hierarchy of power domain nodes, which should match
+ the powergates on the Tegra SoC. Each powergate node represents a power-
+ domain on the Tegra SoC that can be power-gated by the Tegra PMC.
+
+ Hardware blocks belonging to a power domain should contain "power-domains"
+ property that is a phandle pointing to corresponding powergate node.
+
+ The name of the powergate node should be one of the below. Note that not
+ every powergate is applicable to all Tegra devices and the following list
+ shows which powergates are applicable to which devices.
+
+ Please refer to Tegra TRM for mode details on the powergate nodes to use
+ for each power-gate block inside Tegra.
+
+ Name Description Devices Applicable
+ --------------------------------------------------------------
+ 3d 3D Graphics Tegra20/114/124/210
+ 3d0 3D Graphics 0 Tegra30
+ 3d1 3D Graphics 1 Tegra30
+ aud Audio Tegra210
+ dfd Debug Tegra210
+ dis Display A Tegra114/124/210
+ disb Display B Tegra114/124/210
+ heg 2D Graphics Tegra30/114/124/210
+ iram Internal RAM Tegra124/210
+ mpe MPEG Encode All
+ nvdec NVIDIA Video Decode Engine Tegra210
+ nvjpg NVIDIA JPEG Engine Tegra210
+ pcie PCIE Tegra20/30/124/210
+ sata SATA Tegra30/124/210
+ sor Display interfaces Tegra124/210
+ ve2 Video Encode Engine 2 Tegra210
+ venc Video Encode Engine All
+ vdec Video Decode Engine Tegra20/30/114/124
+ vic Video Imaging Compositor Tegra124/210
+ xusba USB Partition A Tegra114/124/210
+ xusbb USB Partition B Tegra114/124/210
+ xusbc USB Partition C Tegra114/124/210
patternProperties:
"^[a-z0-9]+$":
projects / thirdparty / linux.git / commitdiff
