]>
Commit | Line | Data |
---|---|---|
de17db91 | 1 | #! /usr/bin/env perl |
f4d8f037 | 2 | # -*- mode: perl; -*- |
48e5119a | 3 | # Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved. |
ac3d0e13 RS |
4 | # |
5 | # Licensed under the OpenSSL license (the "License"). You may not use | |
6 | # this file except in compliance with the License. You can obtain a copy | |
7 | # in the file LICENSE in the source distribution or at | |
8 | # https://www.openssl.org/source/license.html | |
de17db91 | 9 | |
a4ed5532 | 10 | ## Configure -- OpenSSL source tree configuration script |
1641cb60 | 11 | |
d83112b7 | 12 | use 5.10.0; |
1641cb60 | 13 | use strict; |
141d7325 | 14 | use Config; |
cb6afcd6 RL |
15 | use FindBin; |
16 | use lib "$FindBin::Bin/util/perl"; | |
f09e7ca9 | 17 | use File::Basename; |
7f73eafe | 18 | use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs splitdir/; |
dca99383 | 19 | use File::Path qw/mkpath/; |
8d2214c0 | 20 | use OpenSSL::Glob; |
1641cb60 | 21 | |
22a4f969 | 22 | # see INSTALL for instructions. |
462ba4f6 | 23 | |
8937a4ed RL |
24 | my $orig_death_handler = $SIG{__DIE__}; |
25 | $SIG{__DIE__} = \&death_handler; | |
26 | ||
e4ef2e25 | 27 | my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-egd] [sctp] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--config=FILE] os/compiler[:flags]\n"; |
462ba4f6 | 28 | |
434c5dd3 | 29 | # Options: |
e5f3045f | 30 | # |
f09e7ca9 RS |
31 | # --config add the given configuration file, which will be read after |
32 | # any "Configurations*" files that are found in the same | |
33 | # directory as this script. | |
d74dfafd RL |
34 | # --prefix prefix for the OpenSSL installation, which includes the |
35 | # directories bin, lib, include, share/man, share/doc/openssl | |
36 | # This becomes the value of INSTALLTOP in Makefile | |
37 | # (Default: /usr/local) | |
38 | # --openssldir OpenSSL data area, such as openssl.cnf, certificates and keys. | |
39 | # If it's a relative directory, it will be added on the directory | |
40 | # given with --prefix. | |
41 | # This becomes the value of OPENSSLDIR in Makefile and in C. | |
42 | # (Default: PREFIX/ssl) | |
e5f3045f | 43 | # |
cbfb39d1 AP |
44 | # --cross-compile-prefix Add specified prefix to binutils components. |
45 | # | |
98186eb4 VD |
46 | # --api One of 0.9.8, 1.0.0 or 1.1.0. Do not compile support for |
47 | # interfaces deprecated as of the specified OpenSSL version. | |
48 | # | |
5270e702 RL |
49 | # no-hw-xxx do not compile support for specific crypto hardware. |
50 | # Generic OpenSSL-style methods relating to this support | |
51 | # are always compiled but return NULL if the hardware | |
52 | # support isn't compiled. | |
53 | # no-hw do not compile support for any crypto hardware. | |
5f8d5c96 BM |
54 | # [no-]threads [don't] try to create a library that is suitable for |
55 | # multithreaded applications (default is "threads" if we | |
56 | # know how to do it) | |
fcc6a1c4 | 57 | # [no-]shared [don't] try to create shared libraries when supported. |
ae48242c | 58 | # [no-]pic [don't] try to build position independent code when supported. |
45b71abe | 59 | # If disabled, it also disables shared and dynamic-engine. |
a723979d | 60 | # no-asm do not use assembler |
bc2aadad GT |
61 | # no-dso do not compile in any native shared-library methods. This |
62 | # will ensure that all methods just return NULL. | |
0423f812 | 63 | # no-egd do not compile support for the entropy-gathering daemon APIs |
e452de9d RL |
64 | # [no-]zlib [don't] compile support for zlib compression. |
65 | # zlib-dynamic Like "zlib", but the zlib library is expected to be a shared | |
66 | # library and will be loaded in run-time by the OpenSSL library. | |
7e159e01 | 67 | # sctp include SCTP support |
8b1a5af3 | 68 | # enable-weak-ssl-ciphers |
edcdf38b | 69 | # Enable weak ciphers that are disabled by default. |
5ae5dc96 AP |
70 | # 386 generate 80386 code in assembly modules |
71 | # no-sse2 disables IA-32 SSE2 code in assembly modules, the above | |
72 | # mentioned '386' option implies this one | |
79df9d62 | 73 | # no-<cipher> build without specified algorithm (rsa, idea, rc5, ...) |
fce0ba5f | 74 | # -<xxx> +<xxx> compiler options are passed through |
047d97af AP |
75 | # -static while -static is also a pass-through compiler option (and |
76 | # as such is limited to environments where it's actually | |
77 | # meaningful), it triggers a number configuration options, | |
78 | # namely no-dso, no-pic, no-shared and no-threads. It is | |
79 | # argued that the only reason to produce statically linked | |
80 | # binaries (and in context it means executables linked with | |
81 | # -static flag, and not just executables linked with static | |
82 | # libcrypto.a) is to eliminate dependency on specific run-time, | |
83 | # a.k.a. libc version. The mentioned config options are meant | |
84 | # to achieve just that. Unfortunately on Linux it's impossible | |
85 | # to eliminate the dependency completely for openssl executable | |
86 | # because of getaddrinfo and gethostbyname calls, which can | |
87 | # invoke dynamically loadable library facility anyway to meet | |
88 | # the lookup requests. For this reason on Linux statically | |
89 | # linked openssl executable has rather debugging value than | |
90 | # production quality. | |
e41c8d6a GT |
91 | # |
92 | # DEBUG_SAFESTACK use type-safe stacks to enforce type-safety on stack items | |
93 | # provided to stack calls. Generates unique stack functions for | |
94 | # each possible stack type. | |
d02b48c6 | 95 | # BN_LLONG use the type 'long long' in crypto/bn/bn.h |
d02b48c6 | 96 | # RC4_CHAR use 'char' instead of 'int' for RC4_INT in crypto/rc4/rc4.h |
d0590fe6 AP |
97 | # Following are set automatically by this script |
98 | # | |
8483a003 F |
99 | # MD5_ASM use some extra md5 assembler, |
100 | # SHA1_ASM use some extra sha1 assembler, must define L_ENDIAN for x86 | |
101 | # RMD160_ASM use some extra ripemd160 assembler, | |
d0590fe6 AP |
102 | # SHA256_ASM sha256_block is implemented in assembler |
103 | # SHA512_ASM sha512_block is implemented in assembler | |
28bd8e94 | 104 | # AES_ASM AES_[en|de]crypt is implemented in assembler |
d02b48c6 | 105 | |
363bd0b4 | 106 | # Minimum warning options... any contributions to OpenSSL should at least get |
fce0ba5f | 107 | # past these. |
363bd0b4 | 108 | |
463a7b8c | 109 | # DEBUG_UNUSED enables __owur (warn unused result) checks. |
77305338 RS |
110 | # -DPEDANTIC complements -pedantic and is meant to mask code that |
111 | # is not strictly standard-compliant and/or implementation-specific, | |
112 | # e.g. inline assembly, disregards to alignment requirements, such | |
113 | # that -pedantic would complain about. Incidentally -DPEDANTIC has | |
114 | # to be used even in sanitized builds, because sanitizer too is | |
115 | # supposed to and does take notice of non-standard behaviour. Then | |
116 | # -pedantic with pre-C9x compiler would also complain about 'long | |
117 | # long' not being supported. As 64-bit algorithms are common now, | |
118 | # it grew impossible to resolve this without sizeable additional | |
119 | # code, so we just tell compiler to be pedantic about everything | |
120 | # but 'long long' type. | |
121 | ||
463a7b8c | 122 | my $gcc_devteam_warn = "-DDEBUG_UNUSED" |
463a7b8c | 123 | . " -DPEDANTIC -pedantic -Wno-long-long" |
8bccbce5 | 124 | . " -Wall" |
560ad13c BK |
125 | . " -Wextra" |
126 | . " -Wno-unused-parameter" | |
127 | . " -Wno-missing-field-initializers" | |
54cf3b98 | 128 | . " -Wswitch" |
8bccbce5 RS |
129 | . " -Wsign-compare" |
130 | . " -Wmissing-prototypes" | |
91860165 | 131 | . " -Wstrict-prototypes" |
8bccbce5 RS |
132 | . " -Wshadow" |
133 | . " -Wformat" | |
134 | . " -Wtype-limits" | |
01b76c2c | 135 | . " -Wundef" |
8bccbce5 RS |
136 | . " -Werror" |
137 | ; | |
363bd0b4 | 138 | |
190c8c60 BL |
139 | # These are used in addition to $gcc_devteam_warn when the compiler is clang. |
140 | # TODO(openssl-team): fix problems and investigate if (at least) the | |
480405e4 | 141 | # following warnings can also be enabled: |
8bccbce5 | 142 | # -Wcast-align |
77305338 | 143 | # -Wunreachable-code -- no, too ugly/compiler-specific |
a773b52a RS |
144 | # -Wlanguage-extension-token -- no, we use asm() |
145 | # -Wunused-macros -- no, too tricky for BN and _XOPEN_SOURCE etc | |
146 | # -Wextended-offsetof -- no, needed in CMS ASN1 code | |
8bccbce5 | 147 | my $clang_devteam_warn = "" |
96db2691 | 148 | . " -Wswitch-default" |
77305338 | 149 | . " -Wno-parentheses-equality" |
8bccbce5 RS |
150 | . " -Wno-language-extension-token" |
151 | . " -Wno-extended-offsetof" | |
152 | . " -Wconditional-uninitialized" | |
153 | . " -Wincompatible-pointer-types-discards-qualifiers" | |
154 | . " -Wmissing-variable-declarations" | |
6d50589c | 155 | . " -Wno-unknown-warning-option" |
8bccbce5 | 156 | ; |
cb2bc054 | 157 | |
ef8ca6bd RL |
158 | # This adds backtrace information to the memory leak info. Is only used |
159 | # when crypto-mdebug-backtrace is enabled. | |
160 | my $memleak_devteam_backtrace = "-rdynamic"; | |
a1d3f3d1 | 161 | |
0c28f277 DSH |
162 | my $strict_warnings = 0; |
163 | ||
b7efa56a | 164 | # As for $BSDthreads. Idea is to maintain "collective" set of flags, |
fce0ba5f | 165 | # which would cover all BSD flavors. -pthread applies to them all, |
b7efa56a AP |
166 | # but is treated differently. OpenBSD expands is as -D_POSIX_THREAD |
167 | # -lc_r, which is sufficient. FreeBSD 4.x expands it as -lc_r, | |
168 | # which has to be accompanied by explicit -D_THREAD_SAFE and | |
169 | # sometimes -D_REENTRANT. FreeBSD 5.x expands it as -lc_r, which | |
170 | # seems to be sufficient? | |
9c62a279 | 171 | our $BSDthreads="-pthread -D_THREAD_SAFE -D_REENTRANT"; |
d02b48c6 | 172 | |
98186eb4 | 173 | # |
f430ba31 | 174 | # API compatibility name to version number mapping. |
98186eb4 VD |
175 | # |
176 | my $maxapi = "1.1.0"; # API for "no-deprecated" builds | |
177 | my $apitable = { | |
178 | "1.1.0" => "0x10100000L", | |
179 | "1.0.0" => "0x10000000L", | |
180 | "0.9.8" => "0x00908000L", | |
181 | }; | |
182 | ||
9e0724a1 | 183 | our %table = (); |
291e94df | 184 | our %config = (); |
98fdbce0 | 185 | our %withargs = (); |
f770d75b AP |
186 | our $now_printing; # set to current entry's name in print_table_entry |
187 | # (todo: right thing would be to encapsulate name | |
188 | # into %target [class] and make print_table_entry | |
189 | # a method) | |
3e83e686 | 190 | |
bd5192b1 | 191 | # Forward declarations ############################################### |
7ead0c89 | 192 | |
bd5192b1 RL |
193 | # read_config(filename) |
194 | # | |
195 | # Reads a configuration file and populates %table with the contents | |
196 | # (which the configuration file places in %targets). | |
197 | sub read_config; | |
7d46b942 | 198 | |
bd5192b1 RL |
199 | # resolve_config(target) |
200 | # | |
8483a003 | 201 | # Resolves all the late evaluations, inheritances and so on for the |
bd5192b1 RL |
202 | # chosen target and any target it inherits from. |
203 | sub resolve_config; | |
7d46b942 | 204 | |
15c7adb0 | 205 | |
107b5792 RL |
206 | # Information collection ############################################# |
207 | ||
9fe2bb77 | 208 | # Unified build supports separate build dir |
ec182ef0 RL |
209 | my $srcdir = catdir(absolutedir(dirname($0))); # catdir ensures local syntax |
210 | my $blddir = catdir(absolutedir(".")); # catdir ensures local syntax | |
9fe2bb77 RL |
211 | my $dofile = abs2rel(catfile($srcdir, "util/dofile.pl")); |
212 | ||
b5293d4c RL |
213 | my $local_config_envname = 'OPENSSL_LOCAL_CONFIG_DIR'; |
214 | ||
9fe2bb77 RL |
215 | $config{sourcedir} = abs2rel($srcdir); |
216 | $config{builddir} = abs2rel($blddir); | |
217 | ||
ee4cdb7f RL |
218 | # Collect reconfiguration information if needed |
219 | my @argvcopy=@ARGV; | |
220 | ||
221 | if (grep /^reconf(igure)?$/, @argvcopy) { | |
99aeeecb RL |
222 | die "reconfiguring with other arguments present isn't supported" |
223 | if scalar @argvcopy > 1; | |
ee4cdb7f RL |
224 | if (-f "./configdata.pm") { |
225 | my $file = "./configdata.pm"; | |
226 | unless (my $return = do $file) { | |
227 | die "couldn't parse $file: $@" if $@; | |
228 | die "couldn't do $file: $!" unless defined $return; | |
229 | die "couldn't run $file" unless $return; | |
230 | } | |
231 | ||
232 | @argvcopy = defined($configdata::config{perlargv}) ? | |
233 | @{$configdata::config{perlargv}} : (); | |
234 | die "Incorrect data to reconfigure, please do a normal configuration\n" | |
235 | if (grep(/^reconf/,@argvcopy)); | |
7ecdf18d | 236 | $config{perlenv} = $configdata::config{perlenv} // {}; |
ee4cdb7f RL |
237 | } else { |
238 | die "Insufficient data to reconfigure, please do a normal configuration\n"; | |
239 | } | |
240 | } | |
241 | ||
242 | $config{perlargv} = [ @argvcopy ]; | |
243 | ||
107b5792 RL |
244 | # Collect version numbers |
245 | $config{version} = "unknown"; | |
246 | $config{version_num} = "unknown"; | |
247 | $config{shlib_version_number} = "unknown"; | |
248 | $config{shlib_version_history} = "unknown"; | |
249 | ||
250 | collect_information( | |
9fe2bb77 | 251 | collect_from_file(catfile($srcdir,'include/openssl/opensslv.h')), |
107b5792 RL |
252 | qr/OPENSSL.VERSION.TEXT.*OpenSSL (\S+) / => sub { $config{version} = $1; }, |
253 | qr/OPENSSL.VERSION.NUMBER.*(0x\S+)/ => sub { $config{version_num}=$1 }, | |
254 | qr/SHLIB_VERSION_NUMBER *"([^"]+)"/ => sub { $config{shlib_version_number}=$1 }, | |
255 | qr/SHLIB_VERSION_HISTORY *"([^"]*)"/ => sub { $config{shlib_version_history}=$1 } | |
256 | ); | |
257 | if ($config{shlib_version_history} ne "") { $config{shlib_version_history} .= ":"; } | |
258 | ||
259 | ($config{major}, $config{minor}) | |
260 | = ($config{version} =~ /^([0-9]+)\.([0-9\.]+)/); | |
261 | ($config{shlib_major}, $config{shlib_minor}) | |
262 | = ($config{shlib_version_number} =~ /^([0-9]+)\.([0-9\.]+)/); | |
263 | die "erroneous version information in opensslv.h: ", | |
264 | "$config{major}, $config{minor}, $config{shlib_major}, $config{shlib_minor}\n" | |
265 | if ($config{major} eq "" || $config{minor} eq "" | |
266 | || $config{shlib_major} eq "" || $config{shlib_minor} eq ""); | |
267 | ||
268 | # Collect target configurations | |
269 | ||
85152ca4 | 270 | my $pattern = catfile(dirname($0), "Configurations", "*.conf"); |
97855556 | 271 | foreach (sort glob($pattern)) { |
f09e7ca9 RS |
272 | &read_config($_); |
273 | } | |
d02b48c6 | 274 | |
7ecdf18d | 275 | if (defined env($local_config_envname)) { |
b5293d4c RL |
276 | if ($^O eq 'VMS') { |
277 | # VMS environment variables are logical names, | |
278 | # which can be used as is | |
279 | $pattern = $local_config_envname . ':' . '*.conf'; | |
280 | } else { | |
7ecdf18d | 281 | $pattern = catfile(env($local_config_envname), '*.conf'); |
b5293d4c RL |
282 | } |
283 | ||
97855556 | 284 | foreach (sort glob($pattern)) { |
b5293d4c RL |
285 | &read_config($_); |
286 | } | |
287 | } | |
288 | ||
d5fa7035 RL |
289 | # Save away perl command information |
290 | $config{perl_cmd} = $^X; | |
291 | $config{perl_version} = $Config{version}; | |
292 | $config{perl_archname} = $Config{archname}; | |
293 | ||
291e94df RL |
294 | $config{prefix}=""; |
295 | $config{openssldir}=""; | |
7d130f68 | 296 | $config{processor}=""; |
107b5792 | 297 | $config{libdir}=""; |
9c62a279 | 298 | my $auto_threads=1; # enable threads automatically? true by default |
0396479d | 299 | my $default_ranlib; |
107b5792 | 300 | |
6b01bed2 | 301 | # Known TLS and DTLS protocols |
84a68336 | 302 | my @tls = qw(ssl3 tls1 tls1_1 tls1_2 tls1_3); |
6b01bed2 VD |
303 | my @dtls = qw(dtls1 dtls1_2); |
304 | ||
8483a003 | 305 | # Explicitly known options that are possible to disable. They can |
8b527be2 RL |
306 | # be regexps, and will be used like this: /^no-${option}$/ |
307 | # For developers: keep it sorted alphabetically | |
308 | ||
309 | my @disablables = ( | |
c91a0a83 | 310 | "afalgeng", |
d42d0a4d | 311 | "aria", |
c38bb727 | 312 | "asan", |
8b527be2 | 313 | "asm", |
52739e40 | 314 | "async", |
b184e3ef | 315 | "autoalginit", |
498abff0 | 316 | "autoerrinit", |
dbabc862 | 317 | "autoload-config", |
8b527be2 | 318 | "bf", |
2d0b4412 | 319 | "blake2", |
8b527be2 RL |
320 | "camellia", |
321 | "capieng", | |
322 | "cast", | |
48f14845 | 323 | "chacha", |
8b527be2 RL |
324 | "cmac", |
325 | "cms", | |
326 | "comp", | |
3e45d393 | 327 | "crypto-mdebug", |
ef8ca6bd | 328 | "crypto-mdebug-backtrace", |
8b527be2 RL |
329 | "ct", |
330 | "deprecated", | |
331 | "des", | |
619eb33a | 332 | "devcryptoeng", |
8b527be2 RL |
333 | "dgram", |
334 | "dh", | |
335 | "dsa", | |
336 | "dso", | |
a5ecdc6a | 337 | "dtls", |
343ec2b0 | 338 | "dynamic-engine", |
8b527be2 RL |
339 | "ec", |
340 | "ec2m", | |
6b01bed2 VD |
341 | "ecdh", |
342 | "ecdsa", | |
8b527be2 | 343 | "ec_nistp_64_gcc_128", |
b31feae6 | 344 | "egd", |
8b527be2 | 345 | "engine", |
1288f26f | 346 | "err", |
ce2596d4 | 347 | "external-tests", |
02f7114a | 348 | "filenames", |
f59d0131 KR |
349 | "fuzz-libfuzzer", |
350 | "fuzz-afl", | |
168c3b73 | 351 | "gost", |
b612799a | 352 | "heartbeats", |
8b527be2 RL |
353 | "hw(-.+)?", |
354 | "idea", | |
09aa263a | 355 | "makedepend", |
8b527be2 RL |
356 | "md2", |
357 | "md4", | |
8b527be2 | 358 | "mdc2", |
29df3061 | 359 | "msan", |
fa22f98f | 360 | "multiblock", |
8b527be2 RL |
361 | "nextprotoneg", |
362 | "ocb", | |
363 | "ocsp", | |
ae48242c | 364 | "pic", |
48f14845 | 365 | "poly1305", |
8b527be2 RL |
366 | "posix-io", |
367 | "psk", | |
368 | "rc2", | |
369 | "rc4", | |
370 | "rc5", | |
371 | "rdrand", | |
372 | "rfc3779", | |
8b527be2 | 373 | "rmd160", |
8b527be2 | 374 | "scrypt", |
8b527be2 RL |
375 | "sctp", |
376 | "seed", | |
8b527be2 | 377 | "shared", |
3f5616d7 | 378 | "siphash", |
1bf2cc23 | 379 | "sm2", |
a0c3e4fa | 380 | "sm3", |
f19a5ff9 | 381 | "sm4", |
8b527be2 RL |
382 | "sock", |
383 | "srp", | |
384 | "srtp", | |
385 | "sse2", | |
386 | "ssl", | |
8b527be2 RL |
387 | "ssl-trace", |
388 | "static-engine", | |
389 | "stdio", | |
93880ce1 | 390 | "tests", |
8b527be2 RL |
391 | "threads", |
392 | "tls", | |
1288f26f | 393 | "ts", |
c38bb727 | 394 | "ubsan", |
48feaceb | 395 | "ui-console", |
8b527be2 RL |
396 | "unit-test", |
397 | "whirlpool", | |
8b1a5af3 | 398 | "weak-ssl-ciphers", |
8b527be2 RL |
399 | "zlib", |
400 | "zlib-dynamic", | |
401 | ); | |
6b01bed2 VD |
402 | foreach my $proto ((@tls, @dtls)) |
403 | { | |
404 | push(@disablables, $proto); | |
d8c66f5e | 405 | push(@disablables, "$proto-method") unless $proto eq "tls1_3"; |
6b01bed2 | 406 | } |
8b527be2 | 407 | |
2b1343b9 MC |
408 | my %deprecated_disablables = ( |
409 | "ssl2" => undef, | |
410 | "buf-freelists" => undef, | |
48feaceb RL |
411 | "ripemd" => "rmd160", |
412 | "ui" => "ui-console", | |
e80381e1 RL |
413 | ); |
414 | ||
094925de | 415 | # All of the following are disabled by default: |
c9a112f5 | 416 | |
9e04edf2 | 417 | our %disabled = ( # "what" => "comment" |
dbabc862 | 418 | "asan" => "default", |
a9c27fe1 BK |
419 | "crypto-mdebug" => "default", |
420 | "crypto-mdebug-backtrace" => "default", | |
619eb33a | 421 | "devcryptoeng" => "default", |
9e04edf2 | 422 | "ec_nistp_64_gcc_128" => "default", |
8b1a5af3 | 423 | "egd" => "default", |
ce2596d4 | 424 | "external-tests" => "default", |
f59d0131 KR |
425 | "fuzz-libfuzzer" => "default", |
426 | "fuzz-afl" => "default", | |
b612799a | 427 | "heartbeats" => "default", |
8b1a5af3 | 428 | "md2" => "default", |
29df3061 | 429 | "msan" => "default", |
8b1a5af3 MC |
430 | "rc5" => "default", |
431 | "sctp" => "default", | |
8b1a5af3 | 432 | "ssl-trace" => "default", |
9829b5ab KR |
433 | "ssl3" => "default", |
434 | "ssl3-method" => "default", | |
c38bb727 | 435 | "ubsan" => "default", |
8b1a5af3 MC |
436 | "unit-test" => "default", |
437 | "weak-ssl-ciphers" => "default", | |
438 | "zlib" => "default", | |
439 | "zlib-dynamic" => "default", | |
9e04edf2 | 440 | ); |
c9a112f5 | 441 | |
c569e206 RL |
442 | # Note: => pair form used for aesthetics, not to truly make a hash table |
443 | my @disable_cascades = ( | |
444 | # "what" => [ "cascade", ... ] | |
7d130f68 | 445 | sub { $config{processor} eq "386" } |
c569e206 RL |
446 | => [ "sse2" ], |
447 | "ssl" => [ "ssl3" ], | |
448 | "ssl3-method" => [ "ssl3" ], | |
449 | "zlib" => [ "zlib-dynamic" ], | |
c569e206 | 450 | "des" => [ "mdc2" ], |
9e4d6fbf | 451 | "ec" => [ "ecdsa", "ecdh" ], |
c569e206 | 452 | |
3fd4d211 | 453 | "dgram" => [ "dtls", "sctp" ], |
505f74ca | 454 | "sock" => [ "dgram" ], |
c569e206 | 455 | "dtls" => [ @dtls ], |
343a7467 RL |
456 | sub { 0 == scalar grep { !$disabled{$_} } @dtls } |
457 | => [ "dtls" ], | |
c569e206 | 458 | |
c569e206 | 459 | "tls" => [ @tls ], |
343a7467 RL |
460 | sub { 0 == scalar grep { !$disabled{$_} } @tls } |
461 | => [ "tls" ], | |
c569e206 | 462 | |
ef8ca6bd | 463 | "crypto-mdebug" => [ "crypto-mdebug-backtrace" ], |
343ec2b0 RL |
464 | |
465 | # Without DSO, we can't load dynamic engines, so don't build them dynamic | |
466 | "dso" => [ "dynamic-engine" ], | |
ae48242c RL |
467 | |
468 | # Without position independent code, there can be no shared libraries or DSOs | |
00698061 RL |
469 | "pic" => [ "shared" ], |
470 | "shared" => [ "dynamic-engine" ], | |
619eb33a | 471 | "engine" => [ "afalgeng", "devcryptoeng" ], |
d90a6beb MC |
472 | |
473 | # no-autoalginit is only useful when building non-shared | |
474 | "autoalginit" => [ "shared", "apps" ], | |
475 | ||
15a1bd0a | 476 | "stdio" => [ "apps", "capieng", "egd" ], |
d90a6beb | 477 | "apps" => [ "tests" ], |
302eba3f | 478 | "tests" => [ "external-tests" ], |
3cf96e88 | 479 | "comp" => [ "zlib" ], |
dad8c264 | 480 | "ec" => [ "tls1_3", "sm2" ], |
98020023 | 481 | "sm3" => [ "sm2" ], |
b612799a | 482 | sub { !$disabled{"unit-test"} } => [ "heartbeats" ], |
29df3061 EK |
483 | |
484 | sub { !$disabled{"msan"} } => [ "asm" ], | |
c569e206 RL |
485 | ); |
486 | ||
487 | # Avoid protocol support holes. Also disable all versions below N, if version | |
488 | # N is disabled while N+1 is enabled. | |
489 | # | |
490 | my @list = (reverse @tls); | |
491 | while ((my $first, my $second) = (shift @list, shift @list)) { | |
492 | last unless @list; | |
493 | push @disable_cascades, ( sub { !$disabled{$first} && $disabled{$second} } | |
494 | => [ @list ] ); | |
495 | unshift @list, $second; | |
496 | } | |
497 | my @list = (reverse @dtls); | |
498 | while ((my $first, my $second) = (shift @list, shift @list)) { | |
499 | last unless @list; | |
500 | push @disable_cascades, ( sub { !$disabled{$first} && $disabled{$second} } | |
501 | => [ @list ] ); | |
502 | unshift @list, $second; | |
503 | } | |
504 | ||
7a762197 | 505 | # Explicit "no-..." options will be collected in %disabled along with the defaults. |
e4ef2e25 | 506 | # To remove something from %disabled, use "enable-foo". |
7a762197 BM |
507 | # For symmetry, "disable-foo" is a synonym for "no-foo". |
508 | ||
462ba4f6 | 509 | &usage if ($#ARGV < 0); |
d02b48c6 | 510 | |
5b18235a RL |
511 | # For the "make variables" CINCLUDES and CDEFINES, we support lists with |
512 | # platform specific list separators. Users from those platforms should | |
513 | # recognise those separators from how you set up the PATH to find executables. | |
514 | # The default is the Unix like separator, :, but as an exception, we also | |
515 | # support the space as separator. | |
516 | my $list_separator_re = | |
517 | { VMS => qr/(?<!\^),/, | |
518 | MSWin32 => qr/(?<!\\);/ } -> {$^O} // qr/(?<!\\)[:\s]/; | |
519 | # All the "make variables" we support | |
f5846179 RL |
520 | # Some get pre-populated for the sake of backward compatibility |
521 | # (we supported those before the change to "make variable" support. | |
5b18235a | 522 | my %user = ( |
f5846179 | 523 | AR => env('AR'), |
5b18235a RL |
524 | ARFLAGS => [], |
525 | AS => undef, | |
526 | ASFLAGS => [], | |
f5846179 | 527 | CC => env('CC'), |
5b18235a | 528 | CFLAGS => [], |
f5846179 | 529 | CXX => env('CXX'), |
5b18235a RL |
530 | CXXFLAGS => [], |
531 | CPP => undef, | |
532 | CPPFLAGS => [], # -D, -I, -Wp, | |
533 | CPPDEFINES => [], # Alternative for -D | |
534 | CPPINCLUDES => [], # Alternative for -I | |
f5846179 RL |
535 | CROSS_COMPILE => env('CROSS_COMPILE'), |
536 | HASHBANGPERL=> env('HASHBANGPERL') || env('PERL'), | |
5b18235a RL |
537 | LD => undef, |
538 | LDFLAGS => [], # -L, -Wl, | |
539 | LDLIBS => [], # -l | |
540 | MT => undef, | |
541 | MTFLAGS => [], | |
9e265322 | 542 | PERL => env('PERL') || ($^O ne "VMS" ? $^X : "perl"), |
f5846179 RL |
543 | RANLIB => env('RANLIB'), |
544 | RC => env('RC') || env('WINDRES'), | |
5b18235a RL |
545 | RCFLAGS => [], |
546 | RM => undef, | |
547 | ); | |
f729ba55 RL |
548 | # Info about what "make variables" may be prefixed with the cross compiler |
549 | # prefix. This should NEVER mention any such variable with a list for value. | |
550 | my @user_crossable = qw ( AR AS CC CXX CPP LD MT RANLIB RC ); | |
5b18235a RL |
551 | # The same but for flags given as Configure options. These are *additional* |
552 | # input, as opposed to the VAR=string option that override the corresponding | |
553 | # config target attributes | |
554 | my %useradd = ( | |
555 | CPPDEFINES => [], | |
556 | CPPINCLUDES => [], | |
557 | CPPFLAGS => [], | |
558 | CFLAGS => [], | |
559 | CXXFLAGS => [], | |
560 | LDFLAGS => [], | |
561 | LDLIBS => [], | |
562 | ); | |
563 | ||
564 | my %user_synonyms = ( | |
565 | HASHBANGPERL=> 'PERL', | |
566 | RC => 'WINDRES', | |
567 | ); | |
abe256e7 RL |
568 | |
569 | # Some target attributes have been renamed, this is the translation table | |
570 | my %target_attr_translate =( | |
571 | ar => 'AR', | |
572 | as => 'AS', | |
573 | cc => 'CC', | |
574 | cxx => 'CXX', | |
575 | cpp => 'CPP', | |
576 | hashbangperl => 'HASHBANGPERL', | |
577 | ld => 'LD', | |
578 | mt => 'MT', | |
579 | ranlib => 'RANLIB', | |
580 | rc => 'RC', | |
581 | rm => 'RM', | |
5b18235a | 582 | ); |
5b18235a | 583 | |
2ab92ae9 | 584 | # Initialisers coming from 'config' scripts |
ff455d99 AP |
585 | $config{defines} = [ split(/$list_separator_re/, env('__CNF_CPPDEFINES')) ]; |
586 | $config{includes} = [ split(/$list_separator_re/, env('__CNF_CPPINCLUDES')) ]; | |
587 | $config{cppflags} = [ env('__CNF_CPPFLAGS') || () ]; | |
588 | $config{cflags} = [ env('__CNF_CFLAGS') || () ]; | |
589 | $config{cxxflags} = [ env('__CNF_CXXFLAGS') || () ]; | |
590 | $config{lflags} = [ env('__CNF_LDFLAGS') || () ]; | |
591 | $config{ex_libs} = [ env('__CNF_LDLIBS') || () ]; | |
2ab92ae9 | 592 | |
7d130f68 | 593 | $config{openssl_api_defines}=[]; |
7d130f68 | 594 | $config{openssl_sys_defines}=[]; |
e0bf7c01 | 595 | $config{openssl_feature_defines}=[]; |
3fa04f0d | 596 | $config{options}=""; |
8864f0de | 597 | $config{build_type} = "release"; |
5b18235a | 598 | my $target=""; |
c59cb511 | 599 | |
ac6ae8a9 | 600 | my %cmdvars = (); # Stores FOO='blah' type arguments |
fe05264e | 601 | my %unsupported_options = (); |
e80381e1 | 602 | my %deprecated_options = (); |
8389ec4b RS |
603 | # If you change this, update apps/version.c |
604 | my @known_seed_sources = qw(getrandom devrandom os egd none rdcpu librandom); | |
605 | my @seed_sources = (); | |
fad599f7 | 606 | while (@argvcopy) |
16b6081e | 607 | { |
fad599f7 | 608 | $_ = shift @argvcopy; |
89bea083 RL |
609 | |
610 | # Support env variable assignments among the options | |
611 | if (m|^(\w+)=(.+)?$|) | |
612 | { | |
ac6ae8a9 | 613 | $cmdvars{$1} = $2; |
5b18235a RL |
614 | # Every time a variable is given as a configuration argument, |
615 | # it acts as a reset if the variable. | |
616 | if (exists $user{$1}) | |
617 | { | |
618 | $user{$1} = ref $user{$1} eq "ARRAY" ? [] : undef; | |
619 | } | |
b9201360 RL |
620 | #if (exists $useradd{$1}) |
621 | # { | |
622 | # $useradd{$1} = []; | |
623 | # } | |
89bea083 RL |
624 | next; |
625 | } | |
626 | ||
7c55e22c RL |
627 | # VMS is a case insensitive environment, and depending on settings |
628 | # out of our control, we may receive options uppercased. Let's | |
629 | # downcase at least the part before any equal sign. | |
630 | if ($^O eq "VMS") | |
631 | { | |
632 | s/^([^=]*)/lc($1)/e; | |
633 | } | |
6d5e74f3 AP |
634 | |
635 | # some people just can't read the instructions, clang people have to... | |
636 | s/^-no-(?!integrated-as)/no-/; | |
c9a112f5 | 637 | |
fe05264e RL |
638 | # rewrite some options in "enable-..." form |
639 | s /^-?-?shared$/enable-shared/; | |
640 | s /^sctp$/enable-sctp/; | |
641 | s /^threads$/enable-threads/; | |
642 | s /^zlib$/enable-zlib/; | |
643 | s /^zlib-dynamic$/enable-zlib-dynamic/; | |
c9a112f5 | 644 | |
e4ef2e25 | 645 | if (/^(no|disable|enable)-(.+)$/) |
2b1343b9 MC |
646 | { |
647 | my $word = $2; | |
648 | if (!exists $deprecated_disablables{$word} | |
649 | && !grep { $word =~ /^${_}$/ } @disablables) | |
650 | { | |
651 | $unsupported_options{$_} = 1; | |
652 | next; | |
653 | } | |
654 | } | |
655 | if (/^no-(.+)$/ || /^disable-(.+)$/) | |
656 | { | |
e4ef2e25 RS |
657 | foreach my $proto ((@tls, @dtls)) |
658 | { | |
659 | if ($1 eq "$proto-method") | |
660 | { | |
661 | $disabled{"$proto"} = "option($proto-method)"; | |
662 | last; | |
663 | } | |
664 | } | |
665 | if ($1 eq "dtls") | |
666 | { | |
667 | foreach my $proto (@dtls) | |
668 | { | |
669 | $disabled{$proto} = "option(dtls)"; | |
670 | } | |
c5c7700c | 671 | $disabled{"dtls"} = "option(dtls)"; |
e4ef2e25 RS |
672 | } |
673 | elsif ($1 eq "ssl") | |
674 | { | |
675 | # Last one of its kind | |
676 | $disabled{"ssl3"} = "option(ssl)"; | |
677 | } | |
678 | elsif ($1 eq "tls") | |
679 | { | |
680 | # XXX: Tests will fail if all SSL/TLS | |
681 | # protocols are disabled. | |
682 | foreach my $proto (@tls) | |
683 | { | |
684 | $disabled{$proto} = "option(tls)"; | |
685 | } | |
686 | } | |
343ec2b0 RL |
687 | elsif ($1 eq "static-engine") |
688 | { | |
19ab5790 | 689 | delete $disabled{"dynamic-engine"}; |
343ec2b0 RL |
690 | } |
691 | elsif ($1 eq "dynamic-engine") | |
692 | { | |
19ab5790 | 693 | $disabled{"dynamic-engine"} = "option"; |
343ec2b0 | 694 | } |
2b1343b9 MC |
695 | elsif (exists $deprecated_disablables{$1}) |
696 | { | |
697 | $deprecated_options{$_} = 1; | |
698 | if (defined $deprecated_disablables{$1}) | |
699 | { | |
700 | $disabled{$deprecated_disablables{$1}} = "option"; | |
701 | } | |
702 | } | |
e4ef2e25 RS |
703 | else |
704 | { | |
705 | $disabled{$1} = "option"; | |
706 | } | |
9c62a279 RL |
707 | # No longer an automatic choice |
708 | $auto_threads = 0 if ($1 eq "threads"); | |
fe05264e | 709 | } |
e4ef2e25 | 710 | elsif (/^enable-(.+)$/) |
fe05264e | 711 | { |
343ec2b0 RL |
712 | if ($1 eq "static-engine") |
713 | { | |
19ab5790 | 714 | $disabled{"dynamic-engine"} = "option"; |
343ec2b0 RL |
715 | } |
716 | elsif ($1 eq "dynamic-engine") | |
717 | { | |
19ab5790 | 718 | delete $disabled{"dynamic-engine"}; |
343ec2b0 | 719 | } |
25004db7 RL |
720 | elsif ($1 eq "zlib-dynamic") |
721 | { | |
722 | delete $disabled{"zlib"}; | |
723 | } | |
fe05264e | 724 | my $algo = $1; |
fe05264e | 725 | delete $disabled{$algo}; |
c9a112f5 | 726 | |
9c62a279 RL |
727 | # No longer an automatic choice |
728 | $auto_threads = 0 if ($1 eq "threads"); | |
fe05264e RL |
729 | } |
730 | elsif (/^--strict-warnings$/) | |
731 | { | |
732 | $strict_warnings = 1; | |
733 | } | |
734 | elsif (/^--debug$/) | |
735 | { | |
8864f0de | 736 | $config{build_type} = "debug"; |
fe05264e RL |
737 | } |
738 | elsif (/^--release$/) | |
739 | { | |
8864f0de | 740 | $config{build_type} = "release"; |
fe05264e RL |
741 | } |
742 | elsif (/^386$/) | |
7d130f68 | 743 | { $config{processor}=386; } |
fe05264e RL |
744 | elsif (/^fips$/) |
745 | { | |
b53338cb | 746 | die "FIPS mode not supported\n"; |
fe05264e RL |
747 | } |
748 | elsif (/^rsaref$/) | |
749 | { | |
750 | # No RSAref support any more since it's not needed. | |
751 | # The check for the option is there so scripts aren't | |
752 | # broken | |
753 | } | |
754 | elsif (/^nofipscanistercheck$/) | |
755 | { | |
b53338cb | 756 | die "FIPS mode not supported\n"; |
fe05264e RL |
757 | } |
758 | elsif (/^[-+]/) | |
759 | { | |
45c6e23c | 760 | if (/^--prefix=(.*)$/) |
fe05264e | 761 | { |
291e94df | 762 | $config{prefix}=$1; |
5482dac9 RL |
763 | die "Directory given with --prefix MUST be absolute\n" |
764 | unless file_name_is_absolute($config{prefix}); | |
c9a112f5 | 765 | } |
fe05264e | 766 | elsif (/^--api=(.*)$/) |
0c28f277 | 767 | { |
107b5792 | 768 | $config{api}=$1; |
0c28f277 | 769 | } |
fe05264e | 770 | elsif (/^--libdir=(.*)$/) |
9e43c6b5 | 771 | { |
107b5792 | 772 | $config{libdir}=$1; |
9e43c6b5 | 773 | } |
fe05264e | 774 | elsif (/^--openssldir=(.*)$/) |
9e43c6b5 | 775 | { |
291e94df | 776 | $config{openssldir}=$1; |
9e43c6b5 | 777 | } |
fe05264e | 778 | elsif (/^--with-zlib-lib=(.*)$/) |
9fdb2cc5 | 779 | { |
20a5819f | 780 | $withargs{zlib_lib}=$1; |
7d8bb912 | 781 | } |
fe05264e | 782 | elsif (/^--with-zlib-include=(.*)$/) |
3eb0ed6d | 783 | { |
da430a55 | 784 | $withargs{zlib_include}=$1; |
462ba4f6 | 785 | } |
f59d0131 KR |
786 | elsif (/^--with-fuzzer-lib=(.*)$/) |
787 | { | |
788 | $withargs{fuzzer_lib}=$1; | |
789 | } | |
790 | elsif (/^--with-fuzzer-include=(.*)$/) | |
791 | { | |
792 | $withargs{fuzzer_include}=$1; | |
793 | } | |
8389ec4b RS |
794 | elsif (/^--with-rand-seed=(.*)$/) |
795 | { | |
796 | foreach my $x (split(m|,|, $1)) | |
797 | { | |
798 | die "Unknown --with-rand-seed choice $x\n" | |
799 | if ! grep { $x eq $_ } @known_seed_sources; | |
800 | push @seed_sources, $x; | |
801 | } | |
802 | } | |
fe05264e | 803 | elsif (/^--cross-compile-prefix=(.*)$/) |
e5f3045f | 804 | { |
f729ba55 | 805 | $user{CROSS_COMPILE}=$1; |
e5f3045f | 806 | } |
fe05264e | 807 | elsif (/^--config=(.*)$/) |
d02b48c6 | 808 | { |
fe05264e | 809 | read_config $1; |
c59cb511 | 810 | } |
07e4dc34 | 811 | elsif (/^-l(.*)$/) |
c9a112f5 | 812 | { |
5b18235a | 813 | push @{$useradd{LDLIBS}}, $_; |
d02b48c6 | 814 | } |
b7438b43 AP |
815 | elsif (/^-framework$/) |
816 | { | |
5b18235a | 817 | push @{$useradd{LDLIBS}}, $_, shift(@argvcopy); |
b7438b43 | 818 | } |
07e4dc34 AP |
819 | elsif (/^-L(.*)$/ or /^-Wl,/) |
820 | { | |
821 | push @{$useradd{LDFLAGS}}, $_; | |
822 | } | |
fad599f7 RL |
823 | elsif (/^-rpath$/ or /^-R$/) |
824 | # -rpath is the OSF1 rpath flag | |
825 | # -R is the old Solaris rpath flag | |
826 | { | |
827 | my $rpath = shift(@argvcopy) || ""; | |
828 | $rpath .= " " if $rpath ne ""; | |
5b18235a | 829 | push @{$useradd{LDFLAGS}}, $_, $rpath; |
fad599f7 | 830 | } |
9d46752d AP |
831 | elsif (/^-static$/) |
832 | { | |
5b18235a | 833 | push @{$useradd{LDFLAGS}}, $_; |
047d97af | 834 | $disabled{"dso"} = "forced"; |
9d46752d AP |
835 | $disabled{"pic"} = "forced"; |
836 | $disabled{"shared"} = "forced"; | |
837 | $disabled{"threads"} = "forced"; | |
838 | } | |
bcb1977b RL |
839 | elsif (/^-D(.*)$/) |
840 | { | |
5b18235a | 841 | push @{$useradd{CPPDEFINES}}, $1; |
bcb1977b | 842 | } |
8c3bc594 RL |
843 | elsif (/^-I(.*)$/) |
844 | { | |
5b18235a | 845 | push @{$useradd{CPPINCLUDES}}, $1; |
8c3bc594 RL |
846 | } |
847 | elsif (/^-Wp,$/) | |
848 | { | |
5b18235a | 849 | push @{$useradd{CPPFLAGS}}, $1; |
8c3bc594 | 850 | } |
fe05264e RL |
851 | else # common if (/^[-+]/), just pass down... |
852 | { | |
853 | $_ =~ s/%([0-9a-f]{1,2})/chr(hex($1))/gei; | |
5b18235a RL |
854 | push @{$useradd{CFLAGS}}, $_; |
855 | push @{$useradd{CXXFLAGS}}, $_; | |
fe05264e RL |
856 | } |
857 | } | |
fe05264e RL |
858 | else |
859 | { | |
860 | die "target already defined - $target (offending arg: $_)\n" if ($target ne ""); | |
861 | $target=$_; | |
862 | } | |
863 | unless ($_ eq $target || /^no-/ || /^disable-/) | |
864 | { | |
46f4e1be | 865 | # "no-..." follows later after implied deactivations |
8483a003 | 866 | # have been derived. (Don't take this too seriously, |
fe05264e RL |
867 | # we really only write OPTIONS to the Makefile out of |
868 | # nostalgia.) | |
869 | ||
3fa04f0d RL |
870 | if ($config{options} eq "") |
871 | { $config{options} = $_; } | |
fe05264e | 872 | else |
3fa04f0d | 873 | { $config{options} .= " ".$_; } |
fbabb752 | 874 | } |
ddbe700e | 875 | } |
489eb740 | 876 | |
ddbe700e RL |
877 | if (defined($config{api}) && !exists $apitable->{$config{api}}) { |
878 | die "***** Unsupported api compatibility level: $config{api}\n", | |
879 | } | |
98186eb4 | 880 | |
ddbe700e RL |
881 | if (keys %deprecated_options) |
882 | { | |
883 | warn "***** Deprecated options: ", | |
884 | join(", ", keys %deprecated_options), "\n"; | |
885 | } | |
886 | if (keys %unsupported_options) | |
887 | { | |
888 | die "***** Unsupported options: ", | |
889 | join(", ", keys %unsupported_options), "\n"; | |
fbabb752 | 890 | } |
b6e4dac2 | 891 | |
ac6ae8a9 RL |
892 | # If any %useradd entry has been set, we must check that the "make |
893 | # variables" haven't been set. We start by checking of any %useradd entry | |
fb174faa | 894 | # is set. |
b9201360 | 895 | if (grep { scalar @$_ > 0 } values %useradd) { |
fb174faa | 896 | # Hash of env / make variables names. The possible values are: |
ac6ae8a9 | 897 | # 1 - "make vars" |
fb174faa RL |
898 | # 2 - %useradd entry set |
899 | # 3 - both set | |
ac6ae8a9 | 900 | my %detected_vars = |
fb174faa | 901 | map { my $v = 0; |
ac6ae8a9 | 902 | $v += 1 if $cmdvars{$_}; |
fb174faa RL |
903 | $v += 2 if @{$useradd{$_}}; |
904 | $_ => $v } | |
905 | keys %useradd; | |
906 | ||
ac6ae8a9 RL |
907 | # If any of the corresponding "make variables" is set, we error |
908 | if (grep { $_ & 1 } values %detected_vars) { | |
909 | my $names = join(', ', grep { $detected_vars{$_} > 0 } | |
910 | sort keys %detected_vars); | |
b9201360 | 911 | die <<"_____"; |
ac6ae8a9 | 912 | ***** Mixing make variables and additional compiler/linker flags as |
b9201360 | 913 | ***** configure command line option is not permitted. |
ac6ae8a9 | 914 | ***** Affected make variables: $names |
b9201360 RL |
915 | _____ |
916 | } | |
917 | } | |
918 | ||
ac6ae8a9 RL |
919 | # Check through all supported command line variables to see if any of them |
920 | # were set, and canonicalise the values we got. If no compiler or linker | |
921 | # flag or anything else that affects %useradd was set, we also check the | |
922 | # environment for values. | |
923 | my $anyuseradd = | |
924 | grep { defined $_ && (ref $_ ne 'ARRAY' || @$_) } values %useradd; | |
5b18235a | 925 | foreach (keys %user) { |
ac6ae8a9 RL |
926 | my $value = $cmdvars{$_}; |
927 | $value //= env($_) unless $anyuseradd; | |
928 | $value //= | |
929 | defined $user_synonyms{$_} ? $cmdvars{$user_synonyms{$_}} : undef; | |
930 | $value //= defined $user_synonyms{$_} ? env($user_synonyms{$_}) : undef | |
931 | unless $anyuseradd; | |
5b18235a RL |
932 | |
933 | if (defined $value) { | |
934 | if (ref $user{$_} eq 'ARRAY') { | |
935 | $user{$_} = [ split /$list_separator_re/, $value ]; | |
936 | } elsif (!defined $user{$_}) { | |
937 | $user{$_} = $value; | |
938 | } | |
939 | } | |
940 | } | |
941 | ||
07e4dc34 | 942 | if (grep { /-rpath\b/ } ($user{LDFLAGS} ? @{$user{LDFLAGS}} : ()) |
342a1a23 RL |
943 | && !$disabled{shared} |
944 | && !($disabled{asan} && $disabled{msan} && $disabled{ubsan})) { | |
945 | die "***** Cannot simultaneously use -rpath, shared libraries, and\n", | |
946 | "***** any of asan, msan or ubsan\n"; | |
947 | } | |
948 | ||
c569e206 RL |
949 | my @tocheckfor = (keys %disabled); |
950 | while (@tocheckfor) { | |
951 | my %new_tocheckfor = (); | |
952 | my @cascade_copy = (@disable_cascades); | |
953 | while (@cascade_copy) { | |
954 | my ($test, $descendents) = (shift @cascade_copy, shift @cascade_copy); | |
955 | if (ref($test) eq "CODE" ? $test->() : defined($disabled{$test})) { | |
2110febb | 956 | foreach(grep { !defined($disabled{$_}) } @$descendents) { |
01d99976 | 957 | $new_tocheckfor{$_} = 1; $disabled{$_} = "forced"; |
2110febb | 958 | } |
ef236ec3 | 959 | } |
c569e206 RL |
960 | } |
961 | @tocheckfor = (keys %new_tocheckfor); | |
962 | } | |
edc032b5 | 963 | |
d63c12c6 | 964 | our $die = sub { die @_; }; |
436a376b | 965 | if ($target eq "TABLE") { |
d63c12c6 | 966 | local $die = sub { warn @_; }; |
00ae96ca RL |
967 | foreach (sort keys %table) { |
968 | print_table_entry($_, "TABLE"); | |
969 | } | |
970 | exit 0; | |
436a376b BM |
971 | } |
972 | ||
10a926c1 | 973 | if ($target eq "LIST") { |
00ae96ca RL |
974 | foreach (sort keys %table) { |
975 | print $_,"\n" unless $table{$_}->{template}; | |
976 | } | |
977 | exit 0; | |
10a926c1 UM |
978 | } |
979 | ||
aaf878cc | 980 | if ($target eq "HASH") { |
d63c12c6 | 981 | local $die = sub { warn @_; }; |
00ae96ca RL |
982 | print "%table = (\n"; |
983 | foreach (sort keys %table) { | |
984 | print_table_entry($_, "HASH"); | |
985 | } | |
986 | exit 0; | |
aaf878cc RL |
987 | } |
988 | ||
67c836e8 | 989 | print "Configuring OpenSSL version $config{version} ($config{version_num}) "; |
64119271 RL |
990 | print "for $target\n"; |
991 | ||
51cf8e0b RL |
992 | if (scalar(@seed_sources) == 0) { |
993 | print "Using os-specific seed configuration\n"; | |
994 | push @seed_sources, 'os'; | |
995 | } | |
2805ee1e RL |
996 | if (scalar(grep { $_ eq 'none' } @seed_sources) > 0) { |
997 | die "Cannot seed with none and anything else" if scalar(@seed_sources) > 1; | |
998 | warn <<_____ if scalar(@seed_sources) == 1; | |
2805ee1e | 999 | |
caa85952 DMSP |
1000 | ============================== WARNING =============================== |
1001 | You have selected the --with-rand-seed=none option, which effectively | |
1002 | disables automatic reseeding of the OpenSSL random generator. | |
1003 | All operations depending on the random generator such as creating keys | |
1004 | will not work unless the random generator is seeded manually by the | |
1005 | application. | |
1006 | ||
1007 | Please read the 'Note on random number generation' section in the | |
1008 | INSTALL instructions and the RAND_DRBG(7) manual page for more details. | |
1009 | ============================== WARNING =============================== | |
1010 | ||
2805ee1e RL |
1011 | _____ |
1012 | } | |
e0bf7c01 | 1013 | push @{$config{openssl_feature_defines}}, |
51cf8e0b RL |
1014 | map { (my $x = $_) =~ tr|[\-a-z]|[_A-Z]|; "OPENSSL_RAND_SEED_$x" } |
1015 | @seed_sources; | |
1016 | ||
00ae96ca | 1017 | # Backward compatibility? |
49e04548 | 1018 | if ($target =~ m/^CygWin32(-.*)$/) { |
00ae96ca | 1019 | $target = "Cygwin".$1; |
49e04548 RL |
1020 | } |
1021 | ||
906eb3d0 RL |
1022 | # Support for legacy targets having a name starting with 'debug-' |
1023 | my ($d, $t) = $target =~ m/^(debug-)?(.*)$/; | |
1024 | if ($d) { | |
1025 | $config{build_type} = "debug"; | |
1026 | ||
1027 | # If we do not find debug-foo in the table, the target is set to foo. | |
1028 | if (!$table{$target}) { | |
1029 | $target = $t; | |
1030 | } | |
1031 | } | |
4e360445 RL |
1032 | |
1033 | &usage if !$table{$target} || $table{$target}->{template}; | |
1034 | ||
906eb3d0 RL |
1035 | $config{target} = $target; |
1036 | my %target = resolve_config($target); | |
1037 | ||
abe256e7 RL |
1038 | foreach (keys %target_attr_translate) { |
1039 | $target{$target_attr_translate{$_}} = $target{$_} | |
1040 | if $target{$_}; | |
1041 | delete $target{$_}; | |
1042 | } | |
1043 | ||
793077d0 RL |
1044 | %target = ( %{$table{DEFAULTS}}, %target ); |
1045 | ||
1046 | # Make the flags to build DSOs the same as for shared libraries unless they | |
1047 | # are already defined | |
48dcca26 RL |
1048 | $target{module_cflags} = $target{shared_cflag} unless defined $target{module_cflags}; |
1049 | $target{module_cxxflags} = $target{shared_cxxflag} unless defined $target{module_cxxflags}; | |
1050 | $target{module_ldflags} = $target{shared_ldflag} unless defined $target{module_ldflags}; | |
793077d0 RL |
1051 | { |
1052 | my $shared_info_pl = | |
1053 | catfile(dirname($0), "Configurations", "shared-info.pl"); | |
1054 | my %shared_info = read_eval_file($shared_info_pl); | |
1055 | push @{$target{_conf_fname_int}}, $shared_info_pl; | |
1056 | my $si = $target{shared_target}; | |
1057 | while (ref $si ne "HASH") { | |
1058 | last if ! defined $si; | |
1059 | if (ref $si eq "CODE") { | |
1060 | $si = $si->(); | |
1061 | } else { | |
1062 | $si = $shared_info{$si}; | |
1063 | } | |
1064 | } | |
1065 | ||
1066 | # Some of the 'shared_target' values don't have any entried in | |
1067 | # %shared_info. That's perfectly fine, AS LONG AS the build file | |
1068 | # template knows how to handle this. That is currently the case for | |
1069 | # Windows and VMS. | |
1070 | if (defined $si) { | |
1071 | # Just as above, copy certain shared_* attributes to the corresponding | |
48dcca26 RL |
1072 | # module_ attribute unless the latter is already defined |
1073 | $si->{module_cflags} = $si->{shared_cflag} unless defined $si->{module_cflags}; | |
1074 | $si->{module_cxxflags} = $si->{shared_cxxflag} unless defined $si->{module_cxxflags}; | |
1075 | $si->{module_ldflags} = $si->{shared_ldflag} unless defined $si->{module_ldflags}; | |
793077d0 RL |
1076 | foreach (sort keys %$si) { |
1077 | $target{$_} = defined $target{$_} | |
1078 | ? add($si->{$_})->($target{$_}) | |
1079 | : $si->{$_}; | |
1080 | } | |
1081 | } | |
1082 | } | |
1083 | ||
906eb3d0 RL |
1084 | my %conf_files = map { $_ => 1 } (@{$target{_conf_fname_int}}); |
1085 | $config{conf_files} = [ sort keys %conf_files ]; | |
906eb3d0 RL |
1086 | |
1087 | foreach my $feature (@{$target{disable}}) { | |
1088 | if (exists $deprecated_disablables{$feature}) { | |
1089 | warn "***** config $target disables deprecated feature $feature\n"; | |
1090 | } elsif (!grep { $feature eq $_ } @disablables) { | |
1091 | die "***** config $target disables unknown feature $feature\n"; | |
1092 | } | |
1093 | $disabled{$feature} = 'config'; | |
1094 | } | |
1095 | foreach my $feature (@{$target{enable}}) { | |
1096 | if ("default" eq ($disabled{$_} // "")) { | |
1097 | if (exists $deprecated_disablables{$feature}) { | |
1098 | warn "***** config $target enables deprecated feature $feature\n"; | |
1099 | } elsif (!grep { $feature eq $_ } @disablables) { | |
1100 | die "***** config $target enables unknown feature $feature\n"; | |
1101 | } | |
1102 | delete $disabled{$_}; | |
1103 | } | |
1104 | } | |
1105 | ||
abe256e7 RL |
1106 | $target{CXXFLAGS}//=$target{CFLAGS} if $target{CXX}; |
1107 | $target{cxxflags}//=$target{cflags} if $target{CXX}; | |
107b5792 | 1108 | $target{exe_extension}=""; |
f99f91f1 RL |
1109 | $target{exe_extension}=".exe" if ($config{target} eq "DJGPP" |
1110 | || $config{target} =~ /^(?:Cygwin|mingw)/); | |
107b5792 | 1111 | $target{exe_extension}=".pm" if ($config{target} =~ /vos/); |
ef2dfc99 RL |
1112 | $target{def_extension}=".ld"; |
1113 | $target{def_extension}=".def" if $config{target} =~ /^mingw|VC-/; | |
1114 | $target{def_extension}=".opt" if $config{target} =~ /^vms/; | |
e987f9f2 | 1115 | ($target{shared_extension_simple}=$target{shared_extension}) |
b48d4397 AP |
1116 | =~ s|\.\$\(SHLIB_VERSION_NUMBER\)|| |
1117 | unless defined($target{shared_extension_simple}); | |
1118 | $target{dso_extension}//=$target{shared_extension_simple}; | |
e987f9f2 RL |
1119 | ($target{shared_import_extension}=$target{shared_extension_simple}.".a") |
1120 | if ($config{target} =~ /^(?:Cygwin|mingw)/); | |
1121 | ||
9e265322 RL |
1122 | # Fill %config with values from %user, and in case those are undefined or |
1123 | # empty, use values from %target (acting as a default). | |
5b18235a | 1124 | foreach (keys %user) { |
5b18235a RL |
1125 | my $ref_type = ref $user{$_}; |
1126 | ||
1127 | # Temporary function. Takes an intended ref type (empty string or "ARRAY") | |
1128 | # and a value that's to be coerced into that type. | |
1129 | my $mkvalue = sub { | |
1130 | my $type = shift; | |
1131 | my $value = shift; | |
1132 | my $undef_p = shift; | |
1133 | ||
1134 | die "Too many arguments for \$mkvalue" if @_; | |
1135 | ||
1136 | while (ref $value eq 'CODE') { | |
1137 | $value = $value->(); | |
1138 | } | |
1139 | ||
1140 | if ($type eq 'ARRAY') { | |
1141 | return undef unless defined $value; | |
1142 | return undef if ref $value ne 'ARRAY' && !$value; | |
1143 | return undef if ref $value eq 'ARRAY' && !@$value; | |
1144 | return [ $value ] unless ref $value eq 'ARRAY'; | |
1145 | } | |
1146 | return undef unless $value; | |
1147 | return $value; | |
1148 | }; | |
1149 | ||
abe256e7 | 1150 | $config{$_} = |
5b18235a | 1151 | $mkvalue->($ref_type, $user{$_}) |
abe256e7 RL |
1152 | || $mkvalue->($ref_type, $target{$_}); |
1153 | delete $config{$_} unless defined $config{$_}; | |
5b18235a | 1154 | } |
aaf878cc | 1155 | |
8b5156d1 | 1156 | # Allow overriding the build file name |
5b18235a | 1157 | $config{build_file} = env('BUILDFILE') || $target{build_file} || "Makefile"; |
bd5192b1 | 1158 | |
75d47db4 RL |
1159 | ###################################################################### |
1160 | # Build up information for skipping certain directories depending on disabled | |
1161 | # features, as well as setting up macros for disabled features. | |
1162 | ||
1163 | # This is a tentative database of directories to skip. Some entries may not | |
1164 | # correspond to anything real, but that's ok, they will simply be ignored. | |
1165 | # The actual processing of these entries is done in the build.info lookup | |
1166 | # loop further down. | |
1167 | # | |
1168 | # The key is a Unix formated path in the source tree, the value is an index | |
1169 | # into %disabled_info, so any existing path gets added to a corresponding | |
1170 | # 'skipped' entry in there with the list of skipped directories. | |
1171 | my %skipdir = (); | |
ca372414 RL |
1172 | my %disabled_info = (); # For configdata.pm |
1173 | foreach my $what (sort keys %disabled) { | |
1174 | $config{options} .= " no-$what"; | |
1175 | ||
1176 | if (!grep { $what eq $_ } ( 'dso', 'threads', 'shared', 'pic', | |
1177 | 'dynamic-engine', 'makedepend', | |
1178 | 'zlib-dynamic', 'zlib', 'sse2' )) { | |
1179 | (my $WHAT = uc $what) =~ s|-|_|g; | |
75d47db4 | 1180 | my $skipdir = $what; |
ca372414 RL |
1181 | |
1182 | # fix-up crypto/directory name(s) | |
75d47db4 RL |
1183 | $skipdir = "ripemd" if $what eq "rmd160"; |
1184 | $skipdir = "whrlpool" if $what eq "whirlpool"; | |
ca372414 RL |
1185 | |
1186 | my $macro = $disabled_info{$what}->{macro} = "OPENSSL_NO_$WHAT"; | |
75d47db4 | 1187 | push @{$config{openssl_feature_defines}}, $macro; |
ca372414 | 1188 | |
75d47db4 RL |
1189 | $skipdir{engines} = $what if $what eq 'engine'; |
1190 | $skipdir{"crypto/$skipdir"} = $what | |
1191 | unless $what eq 'async' || $what eq 'err'; | |
ca372414 RL |
1192 | } |
1193 | } | |
1194 | ||
291e94df RL |
1195 | # Make sure build_scheme is consistent. |
1196 | $target{build_scheme} = [ $target{build_scheme} ] | |
1197 | if ref($target{build_scheme}) ne "ARRAY"; | |
1198 | ||
ddf1847d RL |
1199 | my ($builder, $builder_platform, @builder_opts) = |
1200 | @{$target{build_scheme}}; | |
1201 | ||
d192a3aa RL |
1202 | foreach my $checker (($builder_platform."-".$target{build_file}."-checker.pm", |
1203 | $builder_platform."-checker.pm")) { | |
1204 | my $checker_path = catfile($srcdir, "Configurations", $checker); | |
1205 | if (-f $checker_path) { | |
1206 | my $fn = $ENV{CONFIGURE_CHECKER_WARN} | |
1207 | ? sub { warn $@; } : sub { die $@; }; | |
1208 | if (! do $checker_path) { | |
1209 | if ($@) { | |
1210 | $fn->($@); | |
1211 | } elsif ($!) { | |
1212 | $fn->($!); | |
1213 | } else { | |
1214 | $fn->("The detected tools didn't match the platform\n"); | |
1215 | } | |
1216 | } | |
1217 | last; | |
1218 | } | |
1219 | } | |
1220 | ||
488e2b0f RL |
1221 | push @{$config{defines}}, "NDEBUG" if $config{build_type} eq "release"; |
1222 | ||
abe256e7 | 1223 | if ($target =~ /^mingw/ && `$config{CC} --target-help 2>&1` =~ m/-mno-cygwin/m) |
cbecd29a | 1224 | { |
5b18235a | 1225 | push @{$config{cflags}}, "-mno-cygwin"; |
abe256e7 | 1226 | push @{$config{cxxflags}}, "-mno-cygwin" if $config{CXX}; |
5b18235a | 1227 | push @{$config{shared_ldflag}}, "-mno-cygwin"; |
cbecd29a AP |
1228 | } |
1229 | ||
5b18235a | 1230 | if ($target =~ /linux.*-mips/ && !$disabled{asm} |
26f0340d | 1231 | && !grep { $_ !~ /-m(ips|arch=)/ } (@{$user{CFLAGS}}, |
9be64336 | 1232 | @{$useradd{CFLAGS}})) { |
63d8834c | 1233 | # minimally required architecture flags for assembly modules |
fa153b57 RL |
1234 | my $value; |
1235 | $value = '-mips2' if ($target =~ /mips32/); | |
1236 | $value = '-mips3' if ($target =~ /mips64/); | |
1237 | unshift @{$config{cflags}}, $value; | |
abe256e7 | 1238 | unshift @{$config{cxxflags}}, $value if $config{CXX}; |
63d8834c AP |
1239 | } |
1240 | ||
9c62a279 RL |
1241 | # If threads aren't disabled, check how possible they are |
1242 | unless ($disabled{threads}) { | |
1243 | if ($auto_threads) { | |
1244 | # Enabled by default, disable it forcibly if unavailable | |
1245 | if ($target{thread_scheme} eq "(unknown)") { | |
1246 | $disabled{threads} = "unavailable"; | |
1247 | } | |
1248 | } else { | |
8483a003 | 1249 | # The user chose to enable threads explicitly, let's see |
9c62a279 RL |
1250 | # if there's a chance that's possible |
1251 | if ($target{thread_scheme} eq "(unknown)") { | |
1252 | # If the user asked for "threads" and we don't have internal | |
1253 | # knowledge how to do it, [s]he is expected to provide any | |
1254 | # system-dependent compiler options that are necessary. We | |
1255 | # can't truly check that the given options are correct, but | |
1256 | # we expect the user to know what [s]He is doing. | |
26f0340d RL |
1257 | if (!@{$user{CFLAGS}} && !@{$useradd{CFLAGS}} |
1258 | && !@{$user{CPPDEFINES}} && !@{$useradd{CPPDEFINES}}) { | |
9c62a279 RL |
1259 | die "You asked for multi-threading support, but didn't\n" |
1260 | ,"provide any system-specific compiler options\n"; | |
1261 | } | |
1262 | } | |
1263 | } | |
1264 | } | |
1265 | ||
1266 | # If threads still aren't disabled, add a C macro to ensure the source | |
1267 | # code knows about it. Any other flag is taken care of by the configs. | |
1268 | unless($disabled{threads}) { | |
e0bf7c01 | 1269 | push @{$config{openssl_feature_defines}}, "OPENSSL_THREADS"; |
9c62a279 | 1270 | } |
e452de9d | 1271 | |
98186eb4 VD |
1272 | # With "deprecated" disable all deprecated features. |
1273 | if (defined($disabled{"deprecated"})) { | |
107b5792 | 1274 | $config{api} = $maxapi; |
98186eb4 | 1275 | } |
07c4c14c | 1276 | |
8c3bc594 | 1277 | my $no_shared_warn=0; |
291e94df | 1278 | if ($target{shared_target} eq "") |
6f7ac8e1 | 1279 | { |
ae48242c | 1280 | $no_shared_warn = 1 |
b53338cb | 1281 | if (!$disabled{shared} || !$disabled{"dynamic-engine"}); |
84af1bae | 1282 | $disabled{shared} = "no-shared-target"; |
ae48242c RL |
1283 | $disabled{pic} = $disabled{shared} = $disabled{"dynamic-engine"} = |
1284 | "no-shared-target"; | |
6f7ac8e1 | 1285 | } |
b436a982 | 1286 | |
19ab5790 | 1287 | if ($disabled{"dynamic-engine"}) { |
e0bf7c01 | 1288 | push @{$config{openssl_feature_defines}}, "OPENSSL_NO_DYNAMIC_ENGINE"; |
343ec2b0 | 1289 | $config{dynamic_engines} = 0; |
19ab5790 | 1290 | } else { |
e0bf7c01 | 1291 | push @{$config{openssl_feature_defines}}, "OPENSSL_NO_STATIC_ENGINE"; |
19ab5790 | 1292 | $config{dynamic_engines} = 1; |
343ec2b0 | 1293 | } |
ecd45314 | 1294 | |
c38bb727 | 1295 | unless ($disabled{asan}) { |
5b18235a | 1296 | push @{$config{cflags}}, "-fsanitize=address"; |
abe256e7 | 1297 | push @{$config{cxxflags}}, "-fsanitize=address" if $config{CXX}; |
c38bb727 BL |
1298 | } |
1299 | ||
1300 | unless ($disabled{ubsan}) { | |
f430ba31 | 1301 | # -DPEDANTIC or -fnosanitize=alignment may also be required on some |
c38bb727 | 1302 | # platforms. |
5b18235a | 1303 | push @{$config{cflags}}, "-fsanitize=undefined", "-fno-sanitize-recover=all"; |
fa153b57 | 1304 | push @{$config{cxxflags}}, "-fsanitize=undefined", "-fno-sanitize-recover=all" |
abe256e7 | 1305 | if $config{CXX}; |
c38bb727 BL |
1306 | } |
1307 | ||
29df3061 | 1308 | unless ($disabled{msan}) { |
5b18235a | 1309 | push @{$config{cflags}}, "-fsanitize=memory"; |
abe256e7 | 1310 | push @{$config{cxxflags}}, "-fsanitize=memory" if $config{CXX}; |
29df3061 EK |
1311 | } |
1312 | ||
65cc6d5c | 1313 | unless ($disabled{"fuzz-libfuzzer"} && $disabled{"fuzz-afl"} |
29df3061 | 1314 | && $disabled{asan} && $disabled{ubsan} && $disabled{msan}) { |
5b18235a | 1315 | push @{$config{cflags}}, "-fno-omit-frame-pointer", "-g"; |
abe256e7 | 1316 | push @{$config{cxxflags}}, "-fno-omit-frame-pointer", "-g" if $config{CXX}; |
c38bb727 | 1317 | } |
c313e32a AP |
1318 | # |
1319 | # Platform fix-ups | |
1320 | # | |
ae48242c RL |
1321 | |
1322 | # This saves the build files from having to check | |
1323 | if ($disabled{pic}) | |
1324 | { | |
8c3bc594 | 1325 | foreach (qw(shared_cflag shared_cxxflag shared_cppflag |
48dcca26 RL |
1326 | shared_defines shared_includes shared_ldflag |
1327 | module_cflags module_cxxflags module_cppflags | |
1328 | module_defines module_includes module_lflags)) | |
793077d0 | 1329 | { |
5b18235a | 1330 | delete $config{$_}; |
793077d0 RL |
1331 | $target{$_} = ""; |
1332 | } | |
ae48242c | 1333 | } |
4f16039e RL |
1334 | else |
1335 | { | |
68b8bcf4 | 1336 | push @{$config{lib_defines}}, "OPENSSL_PIC"; |
4f16039e | 1337 | } |
ae48242c | 1338 | |
291e94df | 1339 | if ($target{sys_id} ne "") |
cf1b7d96 | 1340 | { |
642a6138 | 1341 | push @{$config{openssl_sys_defines}}, "OPENSSL_SYS_$target{sys_id}"; |
cf1b7d96 RL |
1342 | } |
1343 | ||
00b0d663 | 1344 | unless ($disabled{asm}) { |
d2b2221a | 1345 | $target{cpuid_asm_src}=$table{DEFAULTS}->{cpuid_asm_src} if ($config{processor} eq "386"); |
68b8bcf4 | 1346 | push @{$config{lib_defines}}, "OPENSSL_CPUID_OBJ" if ($target{cpuid_asm_src} ne "mem_clr.c"); |
2ad2281a | 1347 | |
9fe2bb77 | 1348 | $target{bn_asm_src} =~ s/\w+-gf2m.c// if (defined($disabled{ec2m})); |
f8c469de | 1349 | |
9e0724a1 | 1350 | # bn-586 is the only one implementing bn_*_part_words |
68b8bcf4 RL |
1351 | push @{$config{lib_defines}}, "OPENSSL_BN_ASM_PART_WORDS" if ($target{bn_asm_src} =~ /bn-586/); |
1352 | push @{$config{lib_defines}}, "OPENSSL_IA32_SSE2" if (!$disabled{sse2} && $target{bn_asm_src} =~ /86/); | |
dfeab068 | 1353 | |
68b8bcf4 RL |
1354 | push @{$config{lib_defines}}, "OPENSSL_BN_ASM_MONT" if ($target{bn_asm_src} =~ /-mont/); |
1355 | push @{$config{lib_defines}}, "OPENSSL_BN_ASM_MONT5" if ($target{bn_asm_src} =~ /-mont5/); | |
1356 | push @{$config{lib_defines}}, "OPENSSL_BN_ASM_GF2m" if ($target{bn_asm_src} =~ /-gf2m/); | |
31703da3 | 1357 | push @{$config{lib_defines}}, "BN_DIV3W" if ($target{bn_asm_src} =~ /-div3w/); |
5ac7bde7 | 1358 | |
9fe2bb77 | 1359 | if ($target{sha1_asm_src}) { |
68b8bcf4 RL |
1360 | push @{$config{lib_defines}}, "SHA1_ASM" if ($target{sha1_asm_src} =~ /sx86/ || $target{sha1_asm_src} =~ /sha1/); |
1361 | push @{$config{lib_defines}}, "SHA256_ASM" if ($target{sha1_asm_src} =~ /sha256/); | |
1362 | push @{$config{lib_defines}}, "SHA512_ASM" if ($target{sha1_asm_src} =~ /sha512/); | |
9e0724a1 | 1363 | } |
e4739e31 AP |
1364 | if ($target{keccak1600_asm_src} ne $table{DEFAULTS}->{keccak1600_asm_src}) { |
1365 | push @{$config{lib_defines}}, "KECCAK1600_ASM"; | |
1366 | } | |
216e8d91 | 1367 | if ($target{rc4_asm_src} ne $table{DEFAULTS}->{rc4_asm_src}) { |
68b8bcf4 | 1368 | push @{$config{lib_defines}}, "RC4_ASM"; |
216e8d91 | 1369 | } |
9fe2bb77 | 1370 | if ($target{md5_asm_src}) { |
68b8bcf4 | 1371 | push @{$config{lib_defines}}, "MD5_ASM"; |
9e0724a1 | 1372 | } |
d2b2221a | 1373 | $target{cast_asm_src}=$table{DEFAULTS}->{cast_asm_src} unless $disabled{pic}; # CAST assembler is not PIC |
9fe2bb77 | 1374 | if ($target{rmd160_asm_src}) { |
68b8bcf4 | 1375 | push @{$config{lib_defines}}, "RMD160_ASM"; |
9e0724a1 | 1376 | } |
9fe2bb77 | 1377 | if ($target{aes_asm_src}) { |
68b8bcf4 | 1378 | push @{$config{lib_defines}}, "AES_ASM" if ($target{aes_asm_src} =~ m/\baes-/);; |
9fe2bb77 | 1379 | # aes-ctr.fake is not a real file, only indication that assembler |
874a3757 | 1380 | # module implements AES_ctr32_encrypt... |
68b8bcf4 | 1381 | push @{$config{lib_defines}}, "AES_CTR_ASM" if ($target{aes_asm_src} =~ s/\s*aes-ctr\.fake//); |
9fe2bb77 | 1382 | # aes-xts.fake indicates presence of AES_xts_[en|de]crypt... |
68b8bcf4 | 1383 | push @{$config{lib_defines}}, "AES_XTS_ASM" if ($target{aes_asm_src} =~ s/\s*aes-xts\.fake//); |
0d59958c | 1384 | $target{aes_asm_src} =~ s/\s*(vpaes|aesni)-x86\.s//g if ($disabled{sse2}); |
68b8bcf4 RL |
1385 | push @{$config{lib_defines}}, "VPAES_ASM" if ($target{aes_asm_src} =~ m/vpaes/); |
1386 | push @{$config{lib_defines}}, "BSAES_ASM" if ($target{aes_asm_src} =~ m/bsaes/); | |
9e0724a1 | 1387 | } |
9fe2bb77 | 1388 | if ($target{wp_asm_src} =~ /mmx/) { |
46d4d865 | 1389 | if ($config{processor} eq "386") { |
d2b2221a | 1390 | $target{wp_asm_src}=$table{DEFAULTS}->{wp_asm_src}; |
46d4d865 | 1391 | } elsif (!$disabled{"whirlpool"}) { |
68b8bcf4 | 1392 | push @{$config{lib_defines}}, "WHIRLPOOL_ASM"; |
46d4d865 | 1393 | } |
9e0724a1 | 1394 | } |
9fe2bb77 | 1395 | if ($target{modes_asm_src} =~ /ghash-/) { |
68b8bcf4 | 1396 | push @{$config{lib_defines}}, "GHASH_ASM"; |
9e0724a1 | 1397 | } |
9fe2bb77 | 1398 | if ($target{ec_asm_src} =~ /ecp_nistz256/) { |
68b8bcf4 | 1399 | push @{$config{lib_defines}}, "ECP_NISTZ256_ASM"; |
9e0724a1 | 1400 | } |
0e5c8d56 | 1401 | if ($target{ec_asm_src} =~ /x25519/) { |
68b8bcf4 | 1402 | push @{$config{lib_defines}}, "X25519_ASM"; |
0e5c8d56 | 1403 | } |
7b176a54 | 1404 | if ($target{padlock_asm_src} ne $table{DEFAULTS}->{padlock_asm_src}) { |
68b8bcf4 | 1405 | push @{$config{lib_defines}}, "PADLOCK_ASM"; |
7b176a54 | 1406 | } |
9fe2bb77 | 1407 | if ($target{poly1305_asm_src} ne "") { |
68b8bcf4 | 1408 | push @{$config{lib_defines}}, "POLY1305_ASM"; |
9e0724a1 RL |
1409 | } |
1410 | } | |
d02b48c6 | 1411 | |
41d6e0f3 | 1412 | my %predefined = compiler_predefined($config{CROSS_COMPILE}.$config{CC}); |
54cf3b98 | 1413 | |
fe191b49 | 1414 | # Check for makedepend capabilities. |
6d75a83c | 1415 | if (!$disabled{makedepend}) { |
fe191b49 RL |
1416 | if ($config{target} =~ /^(VC|vms)-/) { |
1417 | # For VC- and vms- targets, there's nothing more to do here. The | |
1418 | # functionality is hard coded in the corresponding build files for | |
1419 | # cl (Windows) and CC/DECC (VMS). | |
717f308e TS |
1420 | } elsif (($predefined{__GNUC__} // -1) >= 3 |
1421 | && !($predefined{__APPLE_CC__} && !$predefined{__clang__})) { | |
fe191b49 | 1422 | # We know that GNU C version 3 and up as well as all clang |
717f308e TS |
1423 | # versions support dependency generation, but Xcode did not |
1424 | # handle $cc -M before clang support (but claims __GNUC__ = 3) | |
abe256e7 | 1425 | $config{makedepprog} = "\$(CROSS_COMPILE)$config{CC}"; |
6d75a83c | 1426 | } else { |
fe191b49 RL |
1427 | # In all other cases, we look for 'makedepend', and disable the |
1428 | # capability if not found. | |
6d75a83c RL |
1429 | $config{makedepprog} = which('makedepend'); |
1430 | $disabled{makedepend} = "unavailable" unless $config{makedepprog}; | |
54cf3b98 | 1431 | } |
f1f07a23 | 1432 | } |
8ed40b83 | 1433 | |
8e5da579 | 1434 | if (!$disabled{asm} && !$predefined{__MACH__} && $^O ne 'VMS') { |
0ad4078c AP |
1435 | # probe for -Wa,--noexecstack option... |
1436 | if ($predefined{__clang__}) { | |
1437 | # clang has builtin assembler, which doesn't recognize --help, | |
1438 | # but it apparently recognizes the option in question on all | |
1439 | # supported platforms even when it's meaningless. In other words | |
1440 | # probe would fail, but probed option always accepted... | |
1441 | push @{$config{cflags}}, "-Wa,--noexecstack", "-Qunused-arguments"; | |
8e5da579 | 1442 | } else { |
0ad4078c AP |
1443 | my $cc = $config{CROSS_COMPILE}.$config{CC}; |
1444 | open(PIPE, "$cc -Wa,--help -c -o null.$$.o -x assembler /dev/null 2>&1 |"); | |
1445 | while(<PIPE>) { | |
1446 | if (m/--noexecstack/) { | |
1447 | push @{$config{cflags}}, "-Wa,--noexecstack"; | |
1448 | last; | |
1449 | } | |
1450 | } | |
1451 | close(PIPE); | |
1452 | unlink("null.$$.o"); | |
1453 | } | |
1454 | } | |
7d130f68 RL |
1455 | |
1456 | # Deal with bn_ops ################################################### | |
1457 | ||
7d130f68 | 1458 | $config{bn_ll} =0; |
7d130f68 RL |
1459 | $config{export_var_as_fn} =0; |
1460 | my $def_int="unsigned int"; | |
1461 | $config{rc4_int} =$def_int; | |
b4f35e5e | 1462 | ($config{b64l},$config{b64},$config{b32})=(0,0,1); |
7d130f68 | 1463 | |
94af0cd7 | 1464 | my $count = 0; |
7d130f68 | 1465 | foreach (sort split(/\s+/,$target{bn_ops})) { |
94af0cd7 RS |
1466 | $count++ if /SIXTY_FOUR_BIT|SIXTY_FOUR_BIT_LONG|THIRTY_TWO_BIT/; |
1467 | $config{export_var_as_fn}=1 if $_ eq 'EXPORT_VAR_AS_FN'; | |
1468 | $config{bn_ll}=1 if $_ eq 'BN_LLONG'; | |
1469 | $config{rc4_int}="unsigned char" if $_ eq 'RC4_CHAR'; | |
1470 | ($config{b64l},$config{b64},$config{b32}) | |
1471 | =(0,1,0) if $_ eq 'SIXTY_FOUR_BIT'; | |
1472 | ($config{b64l},$config{b64},$config{b32}) | |
1473 | =(1,0,0) if $_ eq 'SIXTY_FOUR_BIT_LONG'; | |
1474 | ($config{b64l},$config{b64},$config{b32}) | |
1475 | =(0,0,1) if $_ eq 'THIRTY_TWO_BIT'; | |
7d130f68 | 1476 | } |
94af0cd7 RS |
1477 | die "Exactly one of SIXTY_FOUR_BIT|SIXTY_FOUR_BIT_LONG|THIRTY_TWO_BIT can be set in bn_ops\n" |
1478 | if $count > 1; | |
7d130f68 RL |
1479 | |
1480 | ||
1481 | # Hack cflags for better warnings (dev option) ####################### | |
1482 | ||
fa153b57 RL |
1483 | # "Stringify" the C and C++ flags string. This permits it to be made part of |
1484 | # a string and works as well on command lines. | |
5b18235a RL |
1485 | $config{cflags} = [ map { (my $x = $_) =~ s/([\\\"])/\\$1/g; $x } |
1486 | @{$config{cflags}} ]; | |
fa153b57 | 1487 | $config{cxxflags} = [ map { (my $x = $_) =~ s/([\\\"])/\\$1/g; $x } |
abe256e7 | 1488 | @{$config{cxxflags}} ] if $config{CXX}; |
b436a982 | 1489 | |
107b5792 RL |
1490 | if (defined($config{api})) { |
1491 | $config{openssl_api_defines} = [ "OPENSSL_MIN_API=".$apitable->{$config{api}} ]; | |
bcb1977b | 1492 | my $apiflag = sprintf("OPENSSL_API_COMPAT=%s", $apitable->{$config{api}}); |
bcb1977b | 1493 | push @{$config{defines}}, $apiflag; |
98186eb4 VD |
1494 | } |
1495 | ||
0c28f277 DSH |
1496 | if ($strict_warnings) |
1497 | { | |
1498 | my $wopt; | |
6d50589c AP |
1499 | my $gccver = $predefined{__GNUC__} // -1; |
1500 | ||
1501 | die "ERROR --strict-warnings requires gcc[>=4] or gcc-alike" | |
1502 | unless $gccver >= 4; | |
0c28f277 DSH |
1503 | foreach $wopt (split /\s+/, $gcc_devteam_warn) |
1504 | { | |
5b18235a RL |
1505 | push @{$config{cflags}}, $wopt |
1506 | unless grep { $_ eq $wopt } @{$config{cflags}}; | |
fa153b57 | 1507 | push @{$config{cxxflags}}, $wopt |
abe256e7 | 1508 | if ($config{CXX} |
fa153b57 | 1509 | && !grep { $_ eq $wopt } @{$config{cxxflags}}); |
0c28f277 | 1510 | } |
54cf3b98 | 1511 | if (defined($predefined{__clang__})) |
190c8c60 BL |
1512 | { |
1513 | foreach $wopt (split /\s+/, $clang_devteam_warn) | |
1514 | { | |
5b18235a RL |
1515 | push @{$config{cflags}}, $wopt |
1516 | unless grep { $_ eq $wopt } @{$config{cflags}}; | |
fa153b57 | 1517 | push @{$config{cxxflags}}, $wopt |
abe256e7 | 1518 | if ($config{CXX} |
fa153b57 | 1519 | && !grep { $_ eq $wopt } @{$config{cxxflags}}); |
190c8c60 BL |
1520 | } |
1521 | } | |
ef8ca6bd RL |
1522 | } |
1523 | ||
1524 | unless ($disabled{"crypto-mdebug-backtrace"}) | |
1525 | { | |
1526 | foreach my $wopt (split /\s+/, $memleak_devteam_backtrace) | |
a1d3f3d1 | 1527 | { |
5b18235a RL |
1528 | push @{$config{cflags}}, $wopt |
1529 | unless grep { $_ eq $wopt } @{$config{cflags}}; | |
fa153b57 | 1530 | push @{$config{cxxflags}}, $wopt |
abe256e7 | 1531 | if ($config{CXX} |
fa153b57 | 1532 | && !grep { $_ eq $wopt } @{$config{cxxflags}}); |
ef8ca6bd RL |
1533 | } |
1534 | if ($target =~ /^BSD-/) | |
1535 | { | |
5b18235a | 1536 | push @{$config{ex_libs}}, "-lexecinfo"; |
291e94df | 1537 | } |
0c28f277 DSH |
1538 | } |
1539 | ||
c91a0a83 EK |
1540 | unless ($disabled{afalgeng}) { |
1541 | $config{afalgeng}=""; | |
9e381e8a | 1542 | if (grep { $_ eq 'afalgeng' } @{$target{enable}}) { |
79fff39d | 1543 | my $minver = 4*10000 + 1*100 + 0; |
abe256e7 | 1544 | if ($config{CROSS_COMPILE} eq "") { |
79fff39d RL |
1545 | my $verstr = `uname -r`; |
1546 | my ($ma, $mi1, $mi2) = split("\\.", $verstr); | |
1547 | ($mi2) = $mi2 =~ /(\d+)/; | |
1548 | my $ver = $ma*10000 + $mi1*100 + $mi2; | |
1549 | if ($ver < $minver) { | |
c91a0a83 | 1550 | $disabled{afalgeng} = "too-old-kernel"; |
79fff39d RL |
1551 | } else { |
1552 | push @{$config{engdirs}}, "afalg"; | |
1553 | } | |
68dc37c1 MC |
1554 | } else { |
1555 | $disabled{afalgeng} = "cross-compiling"; | |
6cba4a66 | 1556 | } |
79fff39d | 1557 | } else { |
c91a0a83 | 1558 | $disabled{afalgeng} = "not-linux"; |
7f458a48 | 1559 | } |
1560 | } | |
8da00a38 | 1561 | |
e0bf7c01 | 1562 | push @{$config{openssl_feature_defines}}, "OPENSSL_NO_AFALGENG" if ($disabled{afalgeng}); |
7f458a48 | 1563 | |
63468812 RL |
1564 | # Finish up %config by appending things the user gave us on the command line |
1565 | # apart from "make variables" | |
1566 | foreach (keys %useradd) { | |
1567 | # The must all be lists, so we assert that here | |
1568 | die "internal error: \$useradd{$_} isn't an ARRAY\n" | |
1569 | unless ref $useradd{$_} eq 'ARRAY'; | |
1570 | ||
abe256e7 RL |
1571 | if (defined $config{$_}) { |
1572 | push @{$config{$_}}, @{$useradd{$_}}; | |
63468812 | 1573 | } else { |
abe256e7 | 1574 | $config{$_} = [ @{$useradd{$_}} ]; |
63468812 RL |
1575 | } |
1576 | } | |
1577 | ||
5b18235a RL |
1578 | # ALL MODIFICATIONS TO %config and %target MUST BE DONE FROM HERE ON |
1579 | ||
9fe2bb77 RL |
1580 | # If we use the unified build, collect information from build.info files |
1581 | my %unified_info = (); | |
1582 | ||
2b6b606c | 1583 | my $buildinfo_debug = defined($ENV{CONFIGURE_DEBUG_BUILDINFO}); |
ddf1847d | 1584 | if ($builder eq "unified") { |
9fe2bb77 RL |
1585 | use with_fallback qw(Text::Template); |
1586 | ||
9fe2bb77 | 1587 | sub cleandir { |
2e963849 | 1588 | my $base = shift; |
9fe2bb77 | 1589 | my $dir = shift; |
2e963849 RL |
1590 | my $relativeto = shift || "."; |
1591 | ||
1592 | $dir = catdir($base,$dir) unless isabsolute($dir); | |
9fe2bb77 | 1593 | |
ec182ef0 RL |
1594 | # Make sure the directories we're building in exists |
1595 | mkpath($dir); | |
1596 | ||
2e963849 | 1597 | my $res = abs2rel(absolutedir($dir), rel2abs($relativeto)); |
9fe2bb77 RL |
1598 | #print STDERR "DEBUG[cleandir]: $dir , $base => $res\n"; |
1599 | return $res; | |
1600 | } | |
1601 | ||
1602 | sub cleanfile { | |
2e963849 | 1603 | my $base = shift; |
9fe2bb77 | 1604 | my $file = shift; |
2e963849 RL |
1605 | my $relativeto = shift || "."; |
1606 | ||
1607 | $file = catfile($base,$file) unless isabsolute($file); | |
1608 | ||
9fe2bb77 RL |
1609 | my $d = dirname($file); |
1610 | my $f = basename($file); | |
1611 | ||
ec182ef0 RL |
1612 | # Make sure the directories we're building in exists |
1613 | mkpath($d); | |
1614 | ||
2e963849 | 1615 | my $res = abs2rel(catfile(absolutedir($d), $f), rel2abs($relativeto)); |
9fe2bb77 RL |
1616 | #print STDERR "DEBUG[cleanfile]: $d , $f => $res\n"; |
1617 | return $res; | |
1618 | } | |
1619 | ||
1967a42e RL |
1620 | # Store the name of the template file we will build the build file from |
1621 | # in %config. This may be useful for the build file itself. | |
1622 | my @build_file_template_names = | |
1623 | ( $builder_platform."-".$target{build_file}.".tmpl", | |
1624 | $target{build_file}.".tmpl" ); | |
1625 | my @build_file_templates = (); | |
1626 | ||
1627 | # First, look in the user provided directory, if given | |
7ecdf18d | 1628 | if (defined env($local_config_envname)) { |
1967a42e RL |
1629 | @build_file_templates = |
1630 | map { | |
1631 | if ($^O eq 'VMS') { | |
1632 | # VMS environment variables are logical names, | |
1633 | # which can be used as is | |
1634 | $local_config_envname . ':' . $_; | |
1635 | } else { | |
7ecdf18d | 1636 | catfile(env($local_config_envname), $_); |
1967a42e RL |
1637 | } |
1638 | } | |
1639 | @build_file_template_names; | |
1640 | } | |
1641 | # Then, look in our standard directory | |
1642 | push @build_file_templates, | |
1643 | ( map { cleanfile($srcdir, catfile("Configurations", $_), $blddir) } | |
1644 | @build_file_template_names ); | |
1645 | ||
1646 | my $build_file_template; | |
1647 | for $_ (@build_file_templates) { | |
1648 | $build_file_template = $_; | |
1649 | last if -f $build_file_template; | |
1650 | ||
1651 | $build_file_template = undef; | |
1652 | } | |
1653 | if (!defined $build_file_template) { | |
1654 | die "*** Couldn't find any of:\n", join("\n", @build_file_templates), "\n"; | |
1655 | } | |
1656 | $config{build_file_templates} | |
8258975c RL |
1657 | = [ cleanfile($srcdir, catfile("Configurations", "common0.tmpl"), |
1658 | $blddir), | |
1659 | $build_file_template, | |
1967a42e RL |
1660 | cleanfile($srcdir, catfile("Configurations", "common.tmpl"), |
1661 | $blddir) ]; | |
1662 | ||
7f73eafe | 1663 | my @build_dirs = ( [ ] ); # current directory |
9fe2bb77 | 1664 | |
2e0956ba RL |
1665 | $config{build_infos} = [ ]; |
1666 | ||
d201dbc9 | 1667 | my %ordinals = (); |
7f73eafe RL |
1668 | while (@build_dirs) { |
1669 | my @curd = @{shift @build_dirs}; | |
1670 | my $sourced = catdir($srcdir, @curd); | |
1671 | my $buildd = catdir($blddir, @curd); | |
9fe2bb77 | 1672 | |
75d47db4 RL |
1673 | my $unixdir = join('/', @curd); |
1674 | if (exists $skipdir{$unixdir}) { | |
1675 | my $what = $skipdir{$unixdir}; | |
1676 | push @{$disabled_info{$what}->{skipped}}, catdir(@curd); | |
1677 | next; | |
1678 | } | |
1679 | ||
dca99383 | 1680 | mkpath($buildd); |
9fe2bb77 | 1681 | |
7f73eafe | 1682 | my $f = 'build.info'; |
9fe2bb77 RL |
1683 | # The basic things we're trying to build |
1684 | my @programs = (); | |
7f5af797 | 1685 | my @programs_install = (); |
9fe2bb77 | 1686 | my @libraries = (); |
7f5af797 | 1687 | my @libraries_install = (); |
9fe2bb77 | 1688 | my @engines = (); |
7f5af797 | 1689 | my @engines_install = (); |
9fe2bb77 | 1690 | my @scripts = (); |
7f5af797 | 1691 | my @scripts_install = (); |
9fe2bb77 | 1692 | my @extra = (); |
8a67946e | 1693 | my @overrides = (); |
9fe2bb77 RL |
1694 | my @intermediates = (); |
1695 | my @rawlines = (); | |
1696 | ||
9fe2bb77 | 1697 | my %sources = (); |
2a08d1a0 | 1698 | my %shared_sources = (); |
9fe2bb77 | 1699 | my %includes = (); |
b96ab5e6 | 1700 | my %defines = (); |
9fe2bb77 RL |
1701 | my %depends = (); |
1702 | my %renames = (); | |
1703 | my %sharednames = (); | |
ae4c7450 | 1704 | my %generate = (); |
9fe2bb77 | 1705 | |
846e4c4d RL |
1706 | # We want to detect configdata.pm in the source tree, so we |
1707 | # don't use it if the build tree is different. | |
1708 | my $src_configdata = cleanfile($srcdir, "configdata.pm", $blddir); | |
1709 | ||
2e0956ba | 1710 | push @{$config{build_infos}}, catfile(abs2rel($sourced, $blddir), $f); |
cb6afcd6 RL |
1711 | my $template = |
1712 | Text::Template->new(TYPE => 'FILE', | |
1713 | SOURCE => catfile($sourced, $f), | |
1714 | PREPEND => qq{use lib "$FindBin::Bin/util/perl";}); | |
9fe2bb77 RL |
1715 | die "Something went wrong with $sourced/$f: $!\n" unless $template; |
1716 | my @text = | |
1717 | split /^/m, | |
1718 | $template->fill_in(HASH => { config => \%config, | |
1719 | target => \%target, | |
9e04edf2 | 1720 | disabled => \%disabled, |
f59d0131 | 1721 | withargs => \%withargs, |
9fe2bb77 RL |
1722 | builddir => abs2rel($buildd, $blddir), |
1723 | sourcedir => abs2rel($sourced, $blddir), | |
1724 | buildtop => abs2rel($blddir, $blddir), | |
1725 | sourcetop => abs2rel($srcdir, $blddir) }, | |
1726 | DELIMITERS => [ "{-", "-}" ]); | |
1727 | ||
1728 | # The top item of this stack has the following values | |
1729 | # -2 positive already run and we found ELSE (following ELSIF should fail) | |
1730 | # -1 positive already run (skip until ENDIF) | |
1731 | # 0 negatives so far (if we're at a condition, check it) | |
1732 | # 1 last was positive (don't skip lines until next ELSE, ELSIF or ENDIF) | |
1733 | # 2 positive ELSE (following ELSIF should fail) | |
1734 | my @skip = (); | |
1735 | collect_information( | |
1736 | collect_from_array([ @text ], | |
1737 | qr/\\$/ => sub { my $l1 = shift; my $l2 = shift; | |
1738 | $l1 =~ s/\\$//; $l1.$l2 }), | |
1739 | # Info we're looking for | |
1740 | qr/^\s*IF\[((?:\\.|[^\\\]])*)\]\s*$/ | |
635bd409 | 1741 | => sub { |
c5798e0e | 1742 | if (! @skip || $skip[$#skip] > 0) { |
635bd409 RL |
1743 | push @skip, !! $1; |
1744 | } else { | |
1745 | push @skip, -1; | |
1746 | } | |
1747 | }, | |
9fe2bb77 RL |
1748 | qr/^\s*ELSIF\[((?:\\.|[^\\\]])*)\]\s*$/ |
1749 | => sub { die "ELSIF out of scope" if ! @skip; | |
1750 | die "ELSIF following ELSE" if abs($skip[$#skip]) == 2; | |
1751 | $skip[$#skip] = -1 if $skip[$#skip] != 0; | |
1752 | $skip[$#skip] = !! $1 | |
1753 | if $skip[$#skip] == 0; }, | |
1754 | qr/^\s*ELSE\s*$/ | |
1755 | => sub { die "ELSE out of scope" if ! @skip; | |
1756 | $skip[$#skip] = -2 if $skip[$#skip] != 0; | |
1757 | $skip[$#skip] = 2 if $skip[$#skip] == 0; }, | |
1758 | qr/^\s*ENDIF\s*$/ | |
1759 | => sub { die "ENDIF out of scope" if ! @skip; | |
1760 | pop @skip; }, | |
7f73eafe RL |
1761 | qr/^\s*SUBDIRS\s*=\s*(.*)\s*$/ |
1762 | => sub { | |
1763 | if (!@skip || $skip[$#skip] > 0) { | |
1764 | foreach (tokenize($1)) { | |
1765 | push @build_dirs, [ @curd, splitdir($_, 1) ]; | |
1766 | } | |
1767 | } | |
1768 | }, | |
7f5af797 RL |
1769 | qr/^\s*PROGRAMS(_NO_INST)?\s*=\s*(.*)\s*$/ |
1770 | => sub { | |
1771 | if (!@skip || $skip[$#skip] > 0) { | |
1772 | my $install = $1; | |
1773 | my @x = tokenize($2); | |
1774 | push @programs, @x; | |
1775 | push @programs_install, @x unless $install; | |
1776 | } | |
1777 | }, | |
1778 | qr/^\s*LIBS(_NO_INST)?\s*=\s*(.*)\s*$/ | |
1779 | => sub { | |
1780 | if (!@skip || $skip[$#skip] > 0) { | |
1781 | my $install = $1; | |
1782 | my @x = tokenize($2); | |
1783 | push @libraries, @x; | |
1784 | push @libraries_install, @x unless $install; | |
1785 | } | |
1786 | }, | |
1787 | qr/^\s*ENGINES(_NO_INST)?\s*=\s*(.*)\s*$/ | |
1788 | => sub { | |
1789 | if (!@skip || $skip[$#skip] > 0) { | |
1790 | my $install = $1; | |
1791 | my @x = tokenize($2); | |
1792 | push @engines, @x; | |
1793 | push @engines_install, @x unless $install; | |
1794 | } | |
1795 | }, | |
1796 | qr/^\s*SCRIPTS(_NO_INST)?\s*=\s*(.*)\s*$/ | |
1797 | => sub { | |
1798 | if (!@skip || $skip[$#skip] > 0) { | |
1799 | my $install = $1; | |
1800 | my @x = tokenize($2); | |
1801 | push @scripts, @x; | |
1802 | push @scripts_install, @x unless $install; | |
1803 | } | |
1804 | }, | |
9fe2bb77 | 1805 | qr/^\s*EXTRA\s*=\s*(.*)\s*$/ |
ce959812 | 1806 | => sub { push @extra, tokenize($1) |
9fe2bb77 | 1807 | if !@skip || $skip[$#skip] > 0 }, |
8a67946e | 1808 | qr/^\s*OVERRIDES\s*=\s*(.*)\s*$/ |
ce959812 | 1809 | => sub { push @overrides, tokenize($1) |
8a67946e | 1810 | if !@skip || $skip[$#skip] > 0 }, |
9fe2bb77 RL |
1811 | |
1812 | qr/^\s*ORDINALS\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/, | |
ce959812 | 1813 | => sub { push @{$ordinals{$1}}, tokenize($2) |
9fe2bb77 RL |
1814 | if !@skip || $skip[$#skip] > 0 }, |
1815 | qr/^\s*SOURCE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/ | |
ce959812 | 1816 | => sub { push @{$sources{$1}}, tokenize($2) |
9fe2bb77 | 1817 | if !@skip || $skip[$#skip] > 0 }, |
2a08d1a0 | 1818 | qr/^\s*SHARED_SOURCE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/ |
ce959812 | 1819 | => sub { push @{$shared_sources{$1}}, tokenize($2) |
2a08d1a0 | 1820 | if !@skip || $skip[$#skip] > 0 }, |
9fe2bb77 | 1821 | qr/^\s*INCLUDE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/ |
ce959812 | 1822 | => sub { push @{$includes{$1}}, tokenize($2) |
9fe2bb77 | 1823 | if !@skip || $skip[$#skip] > 0 }, |
b96ab5e6 RL |
1824 | qr/^\s*DEFINE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/ |
1825 | => sub { push @{$defines{$1}}, tokenize($2) | |
1826 | if !@skip || $skip[$#skip] > 0 }, | |
4f858293 | 1827 | qr/^\s*DEPEND\[((?:\\.|[^\\\]])*)\]\s*=\s*(.*)\s*$/ |
ce959812 | 1828 | => sub { push @{$depends{$1}}, tokenize($2) |
9fe2bb77 | 1829 | if !@skip || $skip[$#skip] > 0 }, |
ae4c7450 RL |
1830 | qr/^\s*GENERATE\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/ |
1831 | => sub { push @{$generate{$1}}, $2 | |
1832 | if !@skip || $skip[$#skip] > 0 }, | |
9fe2bb77 | 1833 | qr/^\s*RENAME\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/ |
ce959812 | 1834 | => sub { push @{$renames{$1}}, tokenize($2) |
9fe2bb77 RL |
1835 | if !@skip || $skip[$#skip] > 0 }, |
1836 | qr/^\s*SHARED_NAME\[((?:\\.|[^\\\]])+)\]\s*=\s*(.*)\s*$/ | |
ce959812 | 1837 | => sub { push @{$sharednames{$1}}, tokenize($2) |
9fe2bb77 RL |
1838 | if !@skip || $skip[$#skip] > 0 }, |
1839 | qr/^\s*BEGINRAW\[((?:\\.|[^\\\]])+)\]\s*$/ | |
1840 | => sub { | |
1841 | my $lineiterator = shift; | |
1842 | my $target_kind = $1; | |
1843 | while (defined $lineiterator->()) { | |
04f171c0 | 1844 | s|\R$||; |
9fe2bb77 RL |
1845 | if (/^\s*ENDRAW\[((?:\\.|[^\\\]])+)\]\s*$/) { |
1846 | die "ENDRAW doesn't match BEGINRAW" | |
1847 | if $1 ne $target_kind; | |
1848 | last; | |
1849 | } | |
1850 | next if @skip && $skip[$#skip] <= 0; | |
1851 | push @rawlines, $_ | |
1852 | if ($target_kind eq $target{build_file} | |
ddf1847d | 1853 | || $target_kind eq $target{build_file}."(".$builder_platform.")"); |
9fe2bb77 RL |
1854 | } |
1855 | }, | |
ab6e147c | 1856 | qr/^\s*(?:#.*)?$/ => sub { }, |
2b6b606c RL |
1857 | "OTHERWISE" => sub { die "Something wrong with this line:\n$_\nat $sourced/$f" }, |
1858 | "BEFORE" => sub { | |
1859 | if ($buildinfo_debug) { | |
1860 | print STDERR "DEBUG: Parsing ",join(" ", @_),"\n"; | |
1861 | print STDERR "DEBUG: ... before parsing, skip stack is ",join(" ", map { int($_) } @skip),"\n"; | |
1862 | } | |
1863 | }, | |
1864 | "AFTER" => sub { | |
1865 | if ($buildinfo_debug) { | |
1866 | print STDERR "DEBUG: .... after parsing, skip stack is ",join(" ", map { int($_) } @skip),"\n"; | |
1867 | } | |
1868 | }, | |
9fe2bb77 RL |
1869 | ); |
1870 | die "runaway IF?" if (@skip); | |
1871 | ||
1872 | foreach (keys %renames) { | |
1873 | die "$_ renamed to more than one thing: " | |
1874 | ,join(" ", @{$renames{$_}}),"\n" | |
1875 | if scalar @{$renames{$_}} > 1; | |
2e963849 RL |
1876 | my $dest = cleanfile($buildd, $_, $blddir); |
1877 | my $to = cleanfile($buildd, $renames{$_}->[0], $blddir); | |
9fe2bb77 RL |
1878 | die "$dest renamed to more than one thing: " |
1879 | ,$unified_info{rename}->{$dest}, $to | |
1880 | unless !defined($unified_info{rename}->{$dest}) | |
1881 | or $unified_info{rename}->{$dest} eq $to; | |
1882 | $unified_info{rename}->{$dest} = $to; | |
1883 | } | |
1884 | ||
1885 | foreach (@programs) { | |
2e963849 | 1886 | my $program = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
1887 | if ($unified_info{rename}->{$program}) { |
1888 | $program = $unified_info{rename}->{$program}; | |
1889 | } | |
1890 | $unified_info{programs}->{$program} = 1; | |
1891 | } | |
1892 | ||
7f5af797 RL |
1893 | foreach (@programs_install) { |
1894 | my $program = cleanfile($buildd, $_, $blddir); | |
1895 | if ($unified_info{rename}->{$program}) { | |
1896 | $program = $unified_info{rename}->{$program}; | |
1897 | } | |
1898 | $unified_info{install}->{programs}->{$program} = 1; | |
1899 | } | |
1900 | ||
9fe2bb77 | 1901 | foreach (@libraries) { |
2e963849 | 1902 | my $library = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
1903 | if ($unified_info{rename}->{$library}) { |
1904 | $library = $unified_info{rename}->{$library}; | |
1905 | } | |
1906 | $unified_info{libraries}->{$library} = 1; | |
1907 | } | |
1908 | ||
7f5af797 RL |
1909 | foreach (@libraries_install) { |
1910 | my $library = cleanfile($buildd, $_, $blddir); | |
1911 | if ($unified_info{rename}->{$library}) { | |
1912 | $library = $unified_info{rename}->{$library}; | |
1913 | } | |
1914 | $unified_info{install}->{libraries}->{$library} = 1; | |
1915 | } | |
1916 | ||
343ec2b0 | 1917 | die <<"EOF" if scalar @engines and !$config{dynamic_engines}; |
19ab5790 | 1918 | ENGINES can only be used if configured with 'dynamic-engine'. |
9fe2bb77 RL |
1919 | This is usually a fault in a build.info file. |
1920 | EOF | |
1921 | foreach (@engines) { | |
2e963849 | 1922 | my $library = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
1923 | if ($unified_info{rename}->{$library}) { |
1924 | $library = $unified_info{rename}->{$library}; | |
1925 | } | |
1926 | $unified_info{engines}->{$library} = 1; | |
1927 | } | |
1928 | ||
7f5af797 RL |
1929 | foreach (@engines_install) { |
1930 | my $library = cleanfile($buildd, $_, $blddir); | |
1931 | if ($unified_info{rename}->{$library}) { | |
1932 | $library = $unified_info{rename}->{$library}; | |
1933 | } | |
1934 | $unified_info{install}->{engines}->{$library} = 1; | |
1935 | } | |
1936 | ||
9fe2bb77 | 1937 | foreach (@scripts) { |
2e963849 | 1938 | my $script = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
1939 | if ($unified_info{rename}->{$script}) { |
1940 | $script = $unified_info{rename}->{$script}; | |
1941 | } | |
1942 | $unified_info{scripts}->{$script} = 1; | |
1943 | } | |
1944 | ||
7f5af797 RL |
1945 | foreach (@scripts_install) { |
1946 | my $script = cleanfile($buildd, $_, $blddir); | |
1947 | if ($unified_info{rename}->{$script}) { | |
1948 | $script = $unified_info{rename}->{$script}; | |
1949 | } | |
1950 | $unified_info{install}->{scripts}->{$script} = 1; | |
1951 | } | |
1952 | ||
9fe2bb77 | 1953 | foreach (@extra) { |
2e963849 | 1954 | my $extra = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
1955 | $unified_info{extra}->{$extra} = 1; |
1956 | } | |
1957 | ||
8a67946e RL |
1958 | foreach (@overrides) { |
1959 | my $override = cleanfile($buildd, $_, $blddir); | |
1960 | $unified_info{overrides}->{$override} = 1; | |
1961 | } | |
1962 | ||
9fe2bb77 RL |
1963 | push @{$unified_info{rawlines}}, @rawlines; |
1964 | ||
84af1bae | 1965 | unless ($disabled{shared}) { |
9fe2bb77 RL |
1966 | # Check sharednames. |
1967 | foreach (keys %sharednames) { | |
2e963849 | 1968 | my $dest = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
1969 | if ($unified_info{rename}->{$dest}) { |
1970 | $dest = $unified_info{rename}->{$dest}; | |
1971 | } | |
1972 | die "shared_name for $dest with multiple values: " | |
1973 | ,join(" ", @{$sharednames{$_}}),"\n" | |
1974 | if scalar @{$sharednames{$_}} > 1; | |
2e963849 | 1975 | my $to = cleanfile($buildd, $sharednames{$_}->[0], $blddir); |
9fe2bb77 RL |
1976 | die "shared_name found for a library $dest that isn't defined\n" |
1977 | unless $unified_info{libraries}->{$dest}; | |
1978 | die "shared_name for $dest with multiple values: " | |
1979 | ,$unified_info{sharednames}->{$dest}, ", ", $to | |
1980 | unless !defined($unified_info{sharednames}->{$dest}) | |
1981 | or $unified_info{sharednames}->{$dest} eq $to; | |
1982 | $unified_info{sharednames}->{$dest} = $to; | |
1983 | } | |
1984 | ||
1985 | # Additionally, we set up sharednames for libraries that don't | |
33105818 | 1986 | # have any, as themselves. Only for libraries that aren't |
46f4e1be | 1987 | # explicitly static. |
33105818 | 1988 | foreach (grep !/\.a$/, keys %{$unified_info{libraries}}) { |
9fe2bb77 RL |
1989 | if (!defined $unified_info{sharednames}->{$_}) { |
1990 | $unified_info{sharednames}->{$_} = $_ | |
1991 | } | |
1992 | } | |
33105818 RL |
1993 | |
1994 | # Check that we haven't defined any library as both shared and | |
46f4e1be | 1995 | # explicitly static. That is forbidden. |
33105818 RL |
1996 | my @doubles = (); |
1997 | foreach (grep /\.a$/, keys %{$unified_info{libraries}}) { | |
1998 | (my $l = $_) =~ s/\.a$//; | |
1999 | push @doubles, $l if defined $unified_info{sharednames}->{$l}; | |
2000 | } | |
46f4e1be | 2001 | die "these libraries are both explicitly static and shared:\n ", |
33105818 RL |
2002 | join(" ", @doubles), "\n" |
2003 | if @doubles; | |
9fe2bb77 RL |
2004 | } |
2005 | ||
9fe2bb77 RL |
2006 | foreach (keys %sources) { |
2007 | my $dest = $_; | |
2e963849 | 2008 | my $ddest = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
2009 | if ($unified_info{rename}->{$ddest}) { |
2010 | $ddest = $unified_info{rename}->{$ddest}; | |
2011 | } | |
2012 | foreach (@{$sources{$dest}}) { | |
2e963849 | 2013 | my $s = cleanfile($sourced, $_, $blddir); |
9fe2bb77 RL |
2014 | |
2015 | # If it isn't in the source tree, we assume it's generated | |
2016 | # in the build tree | |
846e4c4d | 2017 | if ($s eq $src_configdata || ! -f $s || $generate{$_}) { |
2e963849 | 2018 | $s = cleanfile($buildd, $_, $blddir); |
9fe2bb77 | 2019 | } |
ea241958 RL |
2020 | # We recognise C++, C and asm files |
2021 | if ($s =~ /\.(cc|cpp|c|s|S)$/) { | |
2022 | my $o = $_; | |
2023 | $o =~ s/\.[csS]$/.o/; # C and assembler | |
2024 | $o =~ s/\.(cc|cpp)$/_cc.o/; # C++ | |
2e963849 | 2025 | $o = cleanfile($buildd, $o, $blddir); |
bec2db18 RL |
2026 | $unified_info{sources}->{$ddest}->{$o} = -1; |
2027 | $unified_info{sources}->{$o}->{$s} = -1; | |
83900628 RS |
2028 | } elsif ($s =~ /\.rc$/) { |
2029 | # We also recognise resource files | |
2030 | my $o = $_; | |
2031 | $o =~ s/\.rc$/.res/; # Resource configuration | |
2032 | my $o = cleanfile($buildd, $o, $blddir); | |
bec2db18 RL |
2033 | $unified_info{sources}->{$ddest}->{$o} = -1; |
2034 | $unified_info{sources}->{$o}->{$s} = -1; | |
9fe2bb77 RL |
2035 | } else { |
2036 | $unified_info{sources}->{$ddest}->{$s} = 1; | |
2037 | } | |
2038 | } | |
2039 | } | |
2040 | ||
2a08d1a0 RL |
2041 | foreach (keys %shared_sources) { |
2042 | my $dest = $_; | |
2043 | my $ddest = cleanfile($buildd, $_, $blddir); | |
2044 | if ($unified_info{rename}->{$ddest}) { | |
2045 | $ddest = $unified_info{rename}->{$ddest}; | |
2046 | } | |
2047 | foreach (@{$shared_sources{$dest}}) { | |
2048 | my $s = cleanfile($sourced, $_, $blddir); | |
2049 | ||
2050 | # If it isn't in the source tree, we assume it's generated | |
2051 | # in the build tree | |
846e4c4d | 2052 | if ($s eq $src_configdata || ! -f $s || $generate{$_}) { |
2a08d1a0 RL |
2053 | $s = cleanfile($buildd, $_, $blddir); |
2054 | } | |
ccce3e1d | 2055 | |
ea241958 | 2056 | if ($s =~ /\.(cc|cpp|c|s|S)$/) { |
ccce3e1d | 2057 | # We recognise C++, C and asm files |
ea241958 RL |
2058 | my $o = $_; |
2059 | $o =~ s/\.[csS]$/.o/; # C and assembler | |
2060 | $o =~ s/\.(cc|cpp)$/_cc.o/; # C++ | |
2a08d1a0 | 2061 | $o = cleanfile($buildd, $o, $blddir); |
bec2db18 RL |
2062 | $unified_info{shared_sources}->{$ddest}->{$o} = -1; |
2063 | $unified_info{sources}->{$o}->{$s} = -1; | |
ccce3e1d RL |
2064 | } elsif ($s =~ /\.rc$/) { |
2065 | # We also recognise resource files | |
2066 | my $o = $_; | |
2067 | $o =~ s/\.rc$/.res/; # Resource configuration | |
2068 | my $o = cleanfile($buildd, $o, $blddir); | |
bec2db18 RL |
2069 | $unified_info{shared_sources}->{$ddest}->{$o} = -1; |
2070 | $unified_info{sources}->{$o}->{$s} = -1; | |
ef2dfc99 RL |
2071 | } elsif ($s =~ /\.ld$/) { |
2072 | # We also recognise linker scripts (or corresponding) | |
ccce3e1d | 2073 | # We know they are generated files |
05a72c28 | 2074 | my $ld = cleanfile($buildd, $_, $blddir); |
ef2dfc99 | 2075 | $unified_info{shared_sources}->{$ddest}->{$ld} = 1; |
2a08d1a0 RL |
2076 | } else { |
2077 | die "unrecognised source file type for shared library: $s\n"; | |
2078 | } | |
2079 | } | |
2080 | } | |
2081 | ||
ae4c7450 RL |
2082 | foreach (keys %generate) { |
2083 | my $dest = $_; | |
2084 | my $ddest = cleanfile($buildd, $_, $blddir); | |
2085 | if ($unified_info{rename}->{$ddest}) { | |
2086 | $ddest = $unified_info{rename}->{$ddest}; | |
2087 | } | |
2088 | die "more than one generator for $dest: " | |
2089 | ,join(" ", @{$generate{$_}}),"\n" | |
2090 | if scalar @{$generate{$_}} > 1; | |
2091 | my @generator = split /\s+/, $generate{$dest}->[0]; | |
2092 | $generator[0] = cleanfile($sourced, $generator[0], $blddir), | |
2093 | $unified_info{generate}->{$ddest} = [ @generator ]; | |
2094 | } | |
2095 | ||
9fe2bb77 RL |
2096 | foreach (keys %depends) { |
2097 | my $dest = $_; | |
4f858293 | 2098 | my $ddest = $dest eq "" ? "" : cleanfile($sourced, $_, $blddir); |
8d34daf0 RL |
2099 | |
2100 | # If the destination doesn't exist in source, it can only be | |
2101 | # a generated file in the build tree. | |
846e4c4d | 2102 | if ($ddest ne "" && ($ddest eq $src_configdata || ! -f $ddest)) { |
8d34daf0 RL |
2103 | $ddest = cleanfile($buildd, $_, $blddir); |
2104 | if ($unified_info{rename}->{$ddest}) { | |
2105 | $ddest = $unified_info{rename}->{$ddest}; | |
2106 | } | |
9fe2bb77 RL |
2107 | } |
2108 | foreach (@{$depends{$dest}}) { | |
2e963849 | 2109 | my $d = cleanfile($sourced, $_, $blddir); |
9fe2bb77 | 2110 | |
e737d7b1 RL |
2111 | # If we know it's generated, or assume it is because we can't |
2112 | # find it in the source tree, we set file we depend on to be | |
2113 | # in the build tree rather than the source tree, and assume | |
2114 | # and that there are lines to build it in a BEGINRAW..ENDRAW | |
2115 | # section or in the Makefile template. | |
846e4c4d RL |
2116 | if ($d eq $src_configdata |
2117 | || ! -f $d | |
da1f2104 RL |
2118 | || (grep { $d eq $_ } |
2119 | map { cleanfile($srcdir, $_, $blddir) } | |
4f858293 | 2120 | grep { /\.h$/ } keys %{$unified_info{generate}})) { |
2e963849 | 2121 | $d = cleanfile($buildd, $_, $blddir); |
9fe2bb77 RL |
2122 | } |
2123 | # Take note if the file to depend on is being renamed | |
186a31e5 RL |
2124 | # Take extra care with files ending with .a, they should |
2125 | # be treated without that extension, and the extension | |
2126 | # should be added back after treatment. | |
2127 | $d =~ /(\.a)?$/; | |
2128 | my $e = $1 // ""; | |
2129 | $d = $`; | |
9fe2bb77 RL |
2130 | if ($unified_info{rename}->{$d}) { |
2131 | $d = $unified_info{rename}->{$d}; | |
2132 | } | |
186a31e5 | 2133 | $d .= $e; |
9fe2bb77 | 2134 | $unified_info{depends}->{$ddest}->{$d} = 1; |
9fe2bb77 RL |
2135 | } |
2136 | } | |
2137 | ||
2138 | foreach (keys %includes) { | |
2139 | my $dest = $_; | |
8d34daf0 RL |
2140 | my $ddest = cleanfile($sourced, $_, $blddir); |
2141 | ||
2142 | # If the destination doesn't exist in source, it can only be | |
2143 | # a generated file in the build tree. | |
846e4c4d | 2144 | if ($ddest eq $src_configdata || ! -f $ddest) { |
8d34daf0 RL |
2145 | $ddest = cleanfile($buildd, $_, $blddir); |
2146 | if ($unified_info{rename}->{$ddest}) { | |
2147 | $ddest = $unified_info{rename}->{$ddest}; | |
2148 | } | |
9fe2bb77 RL |
2149 | } |
2150 | foreach (@{$includes{$dest}}) { | |
4748f890 RL |
2151 | my $is = cleandir($sourced, $_, $blddir); |
2152 | my $ib = cleandir($buildd, $_, $blddir); | |
2153 | push @{$unified_info{includes}->{$ddest}->{source}}, $is | |
2154 | unless grep { $_ eq $is } @{$unified_info{includes}->{$ddest}->{source}}; | |
2155 | push @{$unified_info{includes}->{$ddest}->{build}}, $ib | |
2156 | unless grep { $_ eq $ib } @{$unified_info{includes}->{$ddest}->{build}}; | |
9fe2bb77 RL |
2157 | } |
2158 | } | |
b96ab5e6 RL |
2159 | |
2160 | foreach (keys %defines) { | |
2161 | my $dest = $_; | |
2162 | my $ddest = cleanfile($sourced, $_, $blddir); | |
2163 | ||
2164 | # If the destination doesn't exist in source, it can only be | |
2165 | # a generated file in the build tree. | |
2166 | if (! -f $ddest) { | |
2167 | $ddest = cleanfile($buildd, $_, $blddir); | |
2168 | if ($unified_info{rename}->{$ddest}) { | |
2169 | $ddest = $unified_info{rename}->{$ddest}; | |
2170 | } | |
2171 | } | |
2172 | foreach (@{$defines{$dest}}) { | |
2173 | m|^([^=]*)(=.*)?$|; | |
2174 | die "0 length macro name not permitted\n" if $1 eq ""; | |
2175 | die "$1 defined more than once\n" | |
2176 | if defined $unified_info{defines}->{$ddest}->{$1}; | |
2177 | $unified_info{defines}->{$ddest}->{$1} = $2; | |
2178 | } | |
2179 | } | |
9fe2bb77 RL |
2180 | } |
2181 | ||
d201dbc9 RL |
2182 | my $ordinals_text = join(', ', sort keys %ordinals); |
2183 | warn <<"EOF" if $ordinals_text; | |
2184 | ||
2185 | WARNING: ORDINALS were specified for $ordinals_text | |
2186 | They are ignored and should be replaced with a combination of GENERATE, | |
2187 | DEPEND and SHARED_SOURCE. | |
2188 | EOF | |
2189 | ||
1b5ad51f RL |
2190 | # Massage the result |
2191 | ||
e431bcfa RL |
2192 | # If we depend on a header file or a perl module, add an inclusion of |
2193 | # its directory to allow smoothe inclusion | |
2194 | foreach my $dest (keys %{$unified_info{depends}}) { | |
2195 | next if $dest eq ""; | |
2196 | foreach my $d (keys %{$unified_info{depends}->{$dest}}) { | |
2197 | next unless $d =~ /\.(h|pm)$/; | |
906032d5 RL |
2198 | my $i = dirname($d); |
2199 | my $spot = | |
2200 | $d eq "configdata.pm" || defined($unified_info{generate}->{$d}) | |
2201 | ? 'build' : 'source'; | |
2202 | push @{$unified_info{includes}->{$dest}->{$spot}}, $i | |
2203 | unless grep { $_ eq $i } @{$unified_info{includes}->{$dest}->{$spot}}; | |
e431bcfa RL |
2204 | } |
2205 | } | |
2206 | ||
ef2dfc99 | 2207 | # Go through all intermediary files and change their names to something that |
bec2db18 RL |
2208 | # reflects what they will be built for. Note that for some source files, |
2209 | # this leads to duplicate object files because they are used multiple times. | |
2210 | # the goal is to rename all object files according to this scheme: | |
2211 | # {productname}-{midfix}-{origobjname}.[o|res] | |
2212 | # the {midfix} is a keyword indicating the type of product, which is mostly | |
2213 | # valuable for libraries since they come in two forms. | |
2214 | # | |
2215 | # This also reorganises the {sources} and {shared_sources} so that the | |
2216 | # former only contains ALL object files that are supposed to end up in | |
2217 | # static libraries and programs, while the latter contains ALL object files | |
2218 | # that are supposed to end up in shared libraries and DSOs. | |
2219 | # The main reason for having two different source structures is to allow | |
2220 | # the same name to be used for the static and the shared variants of a | |
2221 | # library. | |
2222 | { | |
2223 | # Take copies so we don't get interference from added stuff | |
2224 | my %unified_copy = (); | |
2225 | foreach (('sources', 'shared_sources')) { | |
2226 | $unified_copy{$_} = { %{$unified_info{$_}} } | |
2227 | if defined($unified_info{$_}); | |
2228 | delete $unified_info{$_}; | |
2229 | } | |
2230 | foreach my $prodtype (('programs', 'libraries', 'engines', 'scripts')) { | |
2231 | # $intent serves multi purposes: | |
2232 | # - give a prefix for the new object files names | |
2233 | # - in the case of libraries, rearrange the object files so static | |
2234 | # libraries use the 'sources' structure exclusively, while shared | |
2235 | # libraries use the 'shared_sources' structure exclusively. | |
2236 | my $intent = { | |
2237 | programs => { bin => { src => [ 'sources' ], | |
2238 | dst => 'sources' } }, | |
2239 | libraries => { lib => { src => [ 'sources' ], | |
2240 | dst => 'sources' }, | |
2241 | shlib => { prodselect => | |
2242 | sub { grep !/\.a$/, @_ }, | |
2243 | src => [ 'sources', | |
2244 | 'shared_sources' ], | |
2245 | dst => 'shared_sources' } }, | |
2246 | engines => { dso => { src => [ 'sources', | |
2247 | 'shared_sources' ], | |
2248 | dst => 'shared_sources' } }, | |
2249 | scripts => { script => { src => [ 'sources' ], | |
2250 | dst => 'sources' } } | |
2251 | } -> {$prodtype}; | |
2252 | foreach my $kind (keys %$intent) { | |
856b1b65 RL |
2253 | next if ($intent->{$kind}->{dst} eq 'shared_sources' |
2254 | && $disabled{shared}); | |
2255 | ||
bec2db18 RL |
2256 | my @src = @{$intent->{$kind}->{src}}; |
2257 | my $dst = $intent->{$kind}->{dst}; | |
2258 | my $prodselect = $intent->{$kind}->{prodselect} // sub { @_ }; | |
2259 | foreach my $prod ($prodselect->(keys %{$unified_info{$prodtype}})) { | |
2260 | # %prod_sources has all applicable objects as keys, and | |
2261 | # their corresponding sources as values | |
2262 | my %prod_sources = | |
2263 | map { $_ => [ keys %{$unified_copy{sources}->{$_}} ] } | |
2264 | map { keys %{$unified_copy{$_}->{$prod}} } | |
2265 | @src; | |
2266 | foreach (keys %prod_sources) { | |
ef2dfc99 RL |
2267 | # Only affect object files and resource files, |
2268 | # the others simply get a new value | |
2269 | # (+1 instead of -1) | |
bec2db18 RL |
2270 | if ($_ =~ /\.(o|res)$/) { |
2271 | (my $prodname = $prod) =~ s|\.a$||; | |
2272 | my $newobj = | |
2273 | catfile(dirname($_), | |
2274 | basename($prodname) | |
2275 | . '-' . $kind | |
2276 | . '-' . basename($_)); | |
2277 | $unified_info{$dst}->{$prod}->{$newobj} = 1; | |
2278 | foreach my $src (@{$prod_sources{$_}}) { | |
2279 | $unified_info{sources}->{$newobj}->{$src} = 1; | |
2280 | } | |
2281 | # Adjust dependencies | |
2282 | foreach my $deps (keys %{$unified_info{depends}->{$_}}) { | |
2283 | $unified_info{depends}->{$_}->{$deps} = -1; | |
2284 | $unified_info{depends}->{$newobj}->{$deps} = 1; | |
2285 | } | |
2286 | # Adjust includes | |
2287 | foreach my $k (('source', 'build')) { | |
2288 | next unless | |
2289 | defined($unified_info{includes}->{$_}->{$k}); | |
2290 | my @incs = @{$unified_info{includes}->{$_}->{$k}}; | |
2291 | $unified_info{includes}->{$newobj}->{$k} = [ @incs ]; | |
2292 | } | |
2293 | } else { | |
2294 | $unified_info{$dst}->{$prod}->{$_} = 1; | |
2295 | } | |
2296 | } | |
2297 | } | |
2298 | } | |
2299 | } | |
2300 | } | |
2301 | # At this point, we have a number of sources with the value -1. They | |
2302 | # aren't part of the local build and are probably meant for a different | |
2303 | # platform, and can therefore be cleaned away. That happens when making | |
2304 | # %unified_info more efficient below. | |
2305 | ||
9fe2bb77 RL |
2306 | ### Make unified_info a bit more efficient |
2307 | # One level structures | |
8a67946e | 2308 | foreach (("programs", "libraries", "engines", "scripts", "extra", "overrides")) { |
9fe2bb77 RL |
2309 | $unified_info{$_} = [ sort keys %{$unified_info{$_}} ]; |
2310 | } | |
2311 | # Two level structures | |
7f5af797 | 2312 | foreach my $l1 (("install", "sources", "shared_sources", "ldadd", "depends")) { |
9fe2bb77 | 2313 | foreach my $l2 (sort keys %{$unified_info{$l1}}) { |
bec2db18 RL |
2314 | my @items = |
2315 | sort | |
2316 | grep { $unified_info{$l1}->{$l2}->{$_} > 0 } | |
2317 | keys %{$unified_info{$l1}->{$l2}}; | |
2318 | if (@items) { | |
2319 | $unified_info{$l1}->{$l2} = [ @items ]; | |
2320 | } else { | |
2321 | delete $unified_info{$l1}->{$l2}; | |
2322 | } | |
9fe2bb77 RL |
2323 | } |
2324 | } | |
b96ab5e6 RL |
2325 | # Defines |
2326 | foreach my $dest (sort keys %{$unified_info{defines}}) { | |
2327 | $unified_info{defines}->{$dest} | |
2328 | = [ map { $_.$unified_info{defines}->{$dest}->{$_} } | |
2329 | sort keys %{$unified_info{defines}->{$dest}} ]; | |
2330 | } | |
4748f890 RL |
2331 | # Includes |
2332 | foreach my $dest (sort keys %{$unified_info{includes}}) { | |
2333 | if (defined($unified_info{includes}->{$dest}->{build})) { | |
e431bcfa RL |
2334 | my @source_includes = (); |
2335 | @source_includes = ( @{$unified_info{includes}->{$dest}->{source}} ) | |
2336 | if defined($unified_info{includes}->{$dest}->{source}); | |
4748f890 RL |
2337 | $unified_info{includes}->{$dest} = |
2338 | [ @{$unified_info{includes}->{$dest}->{build}} ]; | |
2339 | foreach my $inc (@source_includes) { | |
2340 | push @{$unified_info{includes}->{$dest}}, $inc | |
2341 | unless grep { $_ eq $inc } @{$unified_info{includes}->{$dest}}; | |
2342 | } | |
609e4be8 | 2343 | } elsif (defined($unified_info{includes}->{$dest}->{source})) { |
4748f890 RL |
2344 | $unified_info{includes}->{$dest} = |
2345 | [ @{$unified_info{includes}->{$dest}->{source}} ]; | |
609e4be8 RL |
2346 | } else { |
2347 | delete $unified_info{includes}->{$dest}; | |
4748f890 RL |
2348 | } |
2349 | } | |
b6e66075 RL |
2350 | |
2351 | # For convenience collect information regarding directories where | |
2352 | # files are generated, those generated files and the end product | |
2353 | # they end up in where applicable. Then, add build rules for those | |
2354 | # directories | |
2355 | my %loopinfo = ( "lib" => [ @{$unified_info{libraries}} ], | |
2356 | "dso" => [ @{$unified_info{engines}} ], | |
2357 | "bin" => [ @{$unified_info{programs}} ], | |
2358 | "script" => [ @{$unified_info{scripts}} ] ); | |
2359 | foreach my $type (keys %loopinfo) { | |
2360 | foreach my $product (@{$loopinfo{$type}}) { | |
2361 | my %dirs = (); | |
2362 | my $pd = dirname($product); | |
2363 | ||
3bed01a0 | 2364 | foreach (@{$unified_info{sources}->{$product} // []}, |
b6e66075 RL |
2365 | @{$unified_info{shared_sources}->{$product} // []}) { |
2366 | my $d = dirname($_); | |
2367 | ||
2368 | # We don't want to create targets for source directories | |
2369 | # when building out of source | |
2370 | next if ($config{sourcedir} ne $config{builddir} | |
2371 | && $d =~ m|^\Q$config{sourcedir}\E|); | |
2372 | # We already have a "test" target, and the current directory | |
2373 | # is just silly to make a target for | |
2374 | next if $d eq "test" || $d eq "."; | |
2375 | ||
2376 | $dirs{$d} = 1; | |
2377 | push @{$unified_info{dirinfo}->{$d}->{deps}}, $_ | |
2378 | if $d ne $pd; | |
2379 | } | |
2380 | foreach (keys %dirs) { | |
2381 | push @{$unified_info{dirinfo}->{$_}->{products}->{$type}}, | |
2382 | $product; | |
2383 | } | |
2384 | } | |
2385 | } | |
9fe2bb77 RL |
2386 | } |
2387 | ||
2388 | # For the schemes that need it, we provide the old *_obj configs | |
2389 | # from the *_asm_obj ones | |
3a55c92b | 2390 | foreach (grep /_(asm|aux)_src$/, keys %target) { |
9fe2bb77 | 2391 | my $src = $_; |
3a55c92b | 2392 | (my $obj = $_) =~ s/_(asm|aux)_src$/_obj/; |
ea241958 RL |
2393 | $target{$obj} = $target{$src}; |
2394 | $target{$obj} =~ s/\.[csS]\b/.o/g; # C and assembler | |
2395 | $target{$obj} =~ s/\.(cc|cpp)\b/_cc.o/g; # C++ | |
9fe2bb77 RL |
2396 | } |
2397 | ||
291e94df RL |
2398 | # Write down our configuration where it fits ######################### |
2399 | ||
b1fafff6 | 2400 | print "Creating configdata.pm\n"; |
291e94df RL |
2401 | open(OUT,">configdata.pm") || die "unable to create configdata.pm: $!\n"; |
2402 | print OUT <<"EOF"; | |
abe256e7 | 2403 | #! $config{HASHBANGPERL} |
b1fafff6 | 2404 | |
291e94df RL |
2405 | package configdata; |
2406 | ||
2407 | use strict; | |
2408 | use warnings; | |
2409 | ||
2410 | use Exporter; | |
2411 | #use vars qw(\@ISA \@EXPORT); | |
2412 | our \@ISA = qw(Exporter); | |
3850f8cb | 2413 | our \@EXPORT = qw(\%config \%target \%disabled \%withargs \%unified_info \@disablables); |
291e94df RL |
2414 | |
2415 | EOF | |
2416 | print OUT "our %config = (\n"; | |
2417 | foreach (sort keys %config) { | |
2418 | if (ref($config{$_}) eq "ARRAY") { | |
2419 | print OUT " ", $_, " => [ ", join(", ", | |
2420 | map { quotify("perl", $_) } | |
2421 | @{$config{$_}}), " ],\n"; | |
7ecdf18d RL |
2422 | } elsif (ref($config{$_}) eq "HASH") { |
2423 | print OUT " ", $_, " => {"; | |
2424 | if (scalar keys %{$config{$_}} > 0) { | |
2425 | print OUT "\n"; | |
2426 | foreach my $key (sort keys %{$config{$_}}) { | |
2427 | print OUT " ", | |
2428 | join(" => ", | |
2429 | quotify("perl", $key), | |
2430 | defined $config{$_}->{$key} | |
2431 | ? quotify("perl", $config{$_}->{$key}) | |
2432 | : "undef"); | |
2433 | print OUT ",\n"; | |
2434 | } | |
2435 | print OUT " "; | |
2436 | } | |
2437 | print OUT "},\n"; | |
291e94df RL |
2438 | } else { |
2439 | print OUT " ", $_, " => ", quotify("perl", $config{$_}), ",\n" | |
2440 | } | |
2441 | } | |
2442 | print OUT <<"EOF"; | |
2443 | ); | |
2444 | ||
2445 | EOF | |
2446 | print OUT "our %target = (\n"; | |
2447 | foreach (sort keys %target) { | |
2448 | if (ref($target{$_}) eq "ARRAY") { | |
2449 | print OUT " ", $_, " => [ ", join(", ", | |
2450 | map { quotify("perl", $_) } | |
2451 | @{$target{$_}}), " ],\n"; | |
2452 | } else { | |
2453 | print OUT " ", $_, " => ", quotify("perl", $target{$_}), ",\n" | |
2454 | } | |
2455 | } | |
2456 | print OUT <<"EOF"; | |
2457 | ); | |
2458 | ||
96d2d7bc RL |
2459 | EOF |
2460 | print OUT "our \%available_protocols = (\n"; | |
2461 | print OUT " tls => [ ", join(", ", map { quotify("perl", $_) } @tls), " ],\n"; | |
2462 | print OUT " dtls => [ ", join(", ", map { quotify("perl", $_) } @dtls), " ],\n"; | |
2463 | print OUT <<"EOF"; | |
2464 | ); | |
2465 | ||
3850f8cb RL |
2466 | EOF |
2467 | print OUT "our \@disablables = (\n"; | |
2468 | foreach (@disablables) { | |
2469 | print OUT " ", quotify("perl", $_), ",\n"; | |
2470 | } | |
2471 | print OUT <<"EOF"; | |
2472 | ); | |
2473 | ||
96d2d7bc RL |
2474 | EOF |
2475 | print OUT "our \%disabled = (\n"; | |
2476 | foreach (sort keys %disabled) { | |
2477 | print OUT " ", quotify("perl", $_), " => ", quotify("perl", $disabled{$_}), ",\n"; | |
2478 | } | |
2479 | print OUT <<"EOF"; | |
2480 | ); | |
2481 | ||
291e94df | 2482 | EOF |
107b5792 RL |
2483 | print OUT "our %withargs = (\n"; |
2484 | foreach (sort keys %withargs) { | |
2485 | if (ref($withargs{$_}) eq "ARRAY") { | |
2486 | print OUT " ", $_, " => [ ", join(", ", | |
2487 | map { quotify("perl", $_) } | |
2488 | @{$withargs{$_}}), " ],\n"; | |
2489 | } else { | |
2490 | print OUT " ", $_, " => ", quotify("perl", $withargs{$_}), ",\n" | |
2491 | } | |
2492 | } | |
2493 | print OUT <<"EOF"; | |
2494 | ); | |
edd4d402 | 2495 | |
107b5792 | 2496 | EOF |
ddf1847d | 2497 | if ($builder eq "unified") { |
9fe2bb77 RL |
2498 | my $recurse; |
2499 | $recurse = sub { | |
2500 | my $indent = shift; | |
2501 | foreach (@_) { | |
2502 | if (ref $_ eq "ARRAY") { | |
2503 | print OUT " "x$indent, "[\n"; | |
2504 | foreach (@$_) { | |
2505 | $recurse->($indent + 4, $_); | |
2506 | } | |
2507 | print OUT " "x$indent, "],\n"; | |
2508 | } elsif (ref $_ eq "HASH") { | |
2509 | my %h = %$_; | |
2510 | print OUT " "x$indent, "{\n"; | |
2511 | foreach (sort keys %h) { | |
2512 | if (ref $h{$_} eq "") { | |
2513 | print OUT " "x($indent + 4), quotify("perl", $_), " => ", quotify("perl", $h{$_}), ",\n"; | |
2514 | } else { | |
2515 | print OUT " "x($indent + 4), quotify("perl", $_), " =>\n"; | |
2516 | $recurse->($indent + 8, $h{$_}); | |
2517 | } | |
2518 | } | |
2519 | print OUT " "x$indent, "},\n"; | |
2520 | } else { | |
2521 | print OUT " "x$indent, quotify("perl", $_), ",\n"; | |
2522 | } | |
2523 | } | |
2524 | }; | |
2525 | print OUT "our %unified_info = (\n"; | |
2526 | foreach (sort keys %unified_info) { | |
2527 | if (ref $unified_info{$_} eq "") { | |
2528 | print OUT " "x4, quotify("perl", $_), " => ", quotify("perl", $unified_info{$_}), ",\n"; | |
2529 | } else { | |
2530 | print OUT " "x4, quotify("perl", $_), " =>\n"; | |
2531 | $recurse->(8, $unified_info{$_}); | |
2532 | } | |
2533 | } | |
2534 | print OUT <<"EOF"; | |
2535 | ); | |
2536 | ||
2537 | EOF | |
2538 | } | |
047f0292 RL |
2539 | print OUT |
2540 | "# The following data is only used when this files is use as a script\n"; | |
abe256e7 | 2541 | print OUT "my \@makevars = (\n"; |
b1fafff6 | 2542 | foreach (sort keys %user) { |
abe256e7 | 2543 | print OUT " '",$_,"',\n"; |
b1fafff6 RL |
2544 | } |
2545 | print OUT ");\n"; | |
ca372414 RL |
2546 | print OUT "my \%disabled_info = (\n"; |
2547 | foreach my $what (sort keys %disabled_info) { | |
2548 | print OUT " '$what' => {\n"; | |
2549 | foreach my $info (sort keys %{$disabled_info{$what}}) { | |
2550 | if (ref $disabled_info{$what}->{$info} eq 'ARRAY') { | |
2551 | print OUT " $info => [ ", | |
2552 | join(', ', map { "'$_'" } @{$disabled_info{$what}->{$info}}), | |
2553 | " ],\n"; | |
2554 | } else { | |
2555 | print OUT " $info => '", $disabled_info{$what}->{$info}, | |
2556 | "',\n"; | |
2557 | } | |
2558 | } | |
2559 | print OUT " },\n"; | |
2560 | } | |
2561 | print OUT ");\n"; | |
f729ba55 | 2562 | print OUT 'my @user_crossable = qw( ', join (' ', @user_crossable), " );\n"; |
b1fafff6 | 2563 | print OUT << 'EOF'; |
b1fafff6 RL |
2564 | # If run directly, we can give some answers, and even reconfigure |
2565 | unless (caller) { | |
2566 | use Getopt::Long; | |
2567 | use File::Spec::Functions; | |
2568 | use File::Basename; | |
2569 | use Pod::Usage; | |
2570 | ||
2571 | my $here = dirname($0); | |
2572 | ||
2573 | my $dump = undef; | |
2574 | my $cmdline = undef; | |
ca372414 | 2575 | my $options = undef; |
50ea9d2b | 2576 | my $target = undef; |
b1fafff6 RL |
2577 | my $envvars = undef; |
2578 | my $makevars = undef; | |
2579 | my $buildparams = undef; | |
2580 | my $reconf = undef; | |
2581 | my $verbose = undef; | |
2582 | my $help = undef; | |
2583 | my $man = undef; | |
2584 | GetOptions('dump|d' => \$dump, | |
2585 | 'command-line|c' => \$cmdline, | |
ca372414 | 2586 | 'options|o' => \$options, |
50ea9d2b | 2587 | 'target|t' => \$target, |
b1fafff6 RL |
2588 | 'environment|e' => \$envvars, |
2589 | 'make-variables|m' => \$makevars, | |
2590 | 'build-parameters|b' => \$buildparams, | |
2591 | 'reconfigure|reconf|r' => \$reconf, | |
2592 | 'verbose|v' => \$verbose, | |
2593 | 'help' => \$help, | |
2594 | 'man' => \$man) | |
2595 | or die "Errors in command line arguments\n"; | |
2596 | ||
50ea9d2b | 2597 | unless ($dump || $cmdline || $options || $target || $envvars || $makevars |
ca372414 | 2598 | || $buildparams || $reconf || $verbose || $help || $man) { |
b1fafff6 RL |
2599 | print STDERR <<"_____"; |
2600 | You must give at least one option. | |
2601 | For more information, do '$0 --help' | |
2602 | _____ | |
2603 | exit(2); | |
2604 | } | |
2605 | ||
2606 | if ($help) { | |
2607 | pod2usage(-exitval => 0, | |
2608 | -verbose => 1); | |
2609 | } | |
2610 | if ($man) { | |
2611 | pod2usage(-exitval => 0, | |
2612 | -verbose => 2); | |
2613 | } | |
2614 | if ($dump || $cmdline) { | |
d5fa7035 | 2615 | print "\nCommand line (with current working directory = $here):\n\n"; |
b1fafff6 | 2616 | print ' ',join(' ', |
9e265322 | 2617 | $config{PERL}, |
b1fafff6 RL |
2618 | catfile($config{sourcedir}, 'Configure'), |
2619 | @{$config{perlargv}}), "\n"; | |
d5fa7035 RL |
2620 | print "\nPerl information:\n\n"; |
2621 | print ' ',$config{perl_cmd},"\n"; | |
2622 | print ' ',$config{perl_version},' for ',$config{perl_archname},"\n"; | |
b1fafff6 | 2623 | } |
ca372414 RL |
2624 | if ($dump || $options) { |
2625 | my $longest = 0; | |
0b80103b | 2626 | my $longest2 = 0; |
ca372414 RL |
2627 | foreach my $what (@disablables) { |
2628 | $longest = length($what) if $longest < length($what); | |
1d2c6b7d RL |
2629 | $longest2 = length($disabled{$what}) |
2630 | if $disabled{$what} && $longest2 < length($disabled{$what}); | |
ca372414 RL |
2631 | } |
2632 | print "\nEnabled features:\n\n"; | |
2633 | foreach my $what (@disablables) { | |
2634 | print " $what\n" unless $disabled{$what}; | |
2635 | } | |
2636 | print "\nDisabled features:\n\n"; | |
2637 | foreach my $what (@disablables) { | |
2638 | if ($disabled{$what}) { | |
2639 | print " $what", ' ' x ($longest - length($what) + 1), | |
0b80103b | 2640 | "[$disabled{$what}]", ' ' x ($longest2 - length($disabled{$what}) + 1); |
ca372414 RL |
2641 | print $disabled_info{$what}->{macro} |
2642 | if $disabled_info{$what}->{macro}; | |
2643 | print ' (skip ', | |
2644 | join(', ', @{$disabled_info{$what}->{skipped}}), | |
2645 | ')' | |
2646 | if $disabled_info{$what}->{skipped}; | |
2647 | print "\n"; | |
2648 | } | |
2649 | } | |
2650 | } | |
50ea9d2b RL |
2651 | if ($dump || $target) { |
2652 | print "\nConfig target attributes:\n\n"; | |
2653 | foreach (sort keys %target) { | |
2654 | next if $_ =~ m|^_| || $_ eq 'template'; | |
2655 | my $quotify = sub { | |
2656 | map { (my $x = $_) =~ s|([\\\$\@"])|\\$1|g; "\"$x\""} @_; | |
2657 | }; | |
2658 | print ' ', $_, ' => '; | |
2659 | if (ref($target{$_}) eq "ARRAY") { | |
2660 | print '[ ', join(', ', $quotify->(@{$target{$_}})), " ],\n"; | |
2661 | } else { | |
2662 | print $quotify->($target{$_}), ",\n" | |
2663 | } | |
2664 | } | |
2665 | } | |
b1fafff6 RL |
2666 | if ($dump || $envvars) { |
2667 | print "\nRecorded environment:\n\n"; | |
2668 | foreach (sort keys %{$config{perlenv}}) { | |
2669 | print ' ',$_,' = ',($config{perlenv}->{$_} || ''),"\n"; | |
2670 | } | |
2671 | } | |
2672 | if ($dump || $makevars) { | |
2673 | print "\nMakevars:\n\n"; | |
abe256e7 | 2674 | foreach my $var (@makevars) { |
f729ba55 | 2675 | my $prefix = ''; |
abe256e7 | 2676 | $prefix = $config{CROSS_COMPILE} |
f729ba55 | 2677 | if grep { $var eq $_ } @user_crossable; |
b700bc59 | 2678 | $prefix //= ''; |
f729ba55 | 2679 | print ' ',$var,' ' x (16 - length $var),'= ', |
abe256e7 RL |
2680 | (ref $config{$var} eq 'ARRAY' |
2681 | ? join(' ', @{$config{$var}}) | |
2682 | : $prefix.$config{$var}), | |
b1fafff6 | 2683 | "\n" |
abe256e7 | 2684 | if defined $config{$var}; |
b1fafff6 RL |
2685 | } |
2686 | ||
2687 | my @buildfile = ($config{builddir}, $config{build_file}); | |
2688 | unshift @buildfile, $here | |
2689 | unless file_name_is_absolute($config{builddir}); | |
2690 | my $buildfile = canonpath(catdir(@buildfile)); | |
2691 | print <<"_____"; | |
2692 | ||
2693 | NOTE: These variables only represent the configuration view. The build file | |
2694 | template may have processed these variables further, please have a look at the | |
2695 | build file for more exact data: | |
2696 | $buildfile | |
2697 | _____ | |
2698 | } | |
2699 | if ($dump || $buildparams) { | |
2700 | my @buildfile = ($config{builddir}, $config{build_file}); | |
2701 | unshift @buildfile, $here | |
2702 | unless file_name_is_absolute($config{builddir}); | |
2703 | print "\nbuild file:\n\n"; | |
2704 | print " ", canonpath(catfile(@buildfile)),"\n"; | |
2705 | ||
2706 | print "\nbuild file templates:\n\n"; | |
2707 | foreach (@{$config{build_file_templates}}) { | |
2708 | my @tmpl = ($_); | |
2709 | unshift @tmpl, $here | |
2710 | unless file_name_is_absolute($config{sourcedir}); | |
2711 | print ' ',canonpath(catfile(@tmpl)),"\n"; | |
2712 | } | |
2713 | } | |
2714 | if ($reconf) { | |
2715 | if ($verbose) { | |
2716 | print 'Reconfiguring with: ', join(' ',@{$config{perlargv}}), "\n"; | |
2717 | foreach (sort keys %{$config{perlenv}}) { | |
2718 | print ' ',$_,' = ',($config{perlenv}->{$_} || ""),"\n"; | |
2719 | } | |
2720 | } | |
2721 | ||
2722 | chdir $here; | |
2723 | exec $^X,catfile($config{sourcedir}, 'Configure'),'reconf'; | |
2724 | } | |
2725 | } | |
2726 | ||
2727 | 1; | |
2728 | ||
2729 | __END__ | |
2730 | ||
2731 | =head1 NAME | |
2732 | ||
2733 | configdata.pm - configuration data for OpenSSL builds | |
2734 | ||
2735 | =head1 SYNOPSIS | |
2736 | ||
2737 | Interactive: | |
2738 | ||
2739 | perl configdata.pm [options] | |
2740 | ||
2741 | As data bank module: | |
2742 | ||
2743 | use configdata; | |
f2d4be3b | 2744 | |
b1fafff6 RL |
2745 | =head1 DESCRIPTION |
2746 | ||
2747 | This module can be used in two modes, interactively and as a module containing | |
2748 | all the data recorded by OpenSSL's Configure script. | |
2749 | ||
2750 | When used interactively, simply run it as any perl script, with at least one | |
2751 | option, and you will get the information you ask for. See L</OPTIONS> below. | |
2752 | ||
2753 | When loaded as a module, you get a few databanks with useful information to | |
2754 | perform build related tasks. The databanks are: | |
2755 | ||
2756 | %config Configured things. | |
2757 | %target The OpenSSL config target with all inheritances | |
2758 | resolved. | |
2759 | %disabled The features that are disabled. | |
2760 | @disablables The list of features that can be disabled. | |
2761 | %withargs All data given through --with-THING options. | |
2762 | %unified_info All information that was computed from the build.info | |
2763 | files. | |
2764 | ||
2765 | =head1 OPTIONS | |
2766 | ||
2767 | =over 4 | |
2768 | ||
2769 | =item B<--help> | |
2770 | ||
2771 | Print a brief help message and exit. | |
2772 | ||
2773 | =item B<--man> | |
2774 | ||
2775 | Print the manual page and exit. | |
2776 | ||
85d6ad34 | 2777 | =item B<--dump> | B<-d> |
b1fafff6 RL |
2778 | |
2779 | Print all relevant configuration data. This is equivalent to B<--command-line> | |
50ea9d2b RL |
2780 | B<--options> B<--target> B<--environment> B<--make-variables> |
2781 | B<--build-parameters>. | |
b1fafff6 RL |
2782 | |
2783 | =item B<--command-line> | B<-c> | |
2784 | ||
2785 | Print the current configuration command line. | |
2786 | ||
ca372414 RL |
2787 | =item B<--options> | B<-o> |
2788 | ||
2789 | Print the features, both enabled and disabled, and display defined macro and | |
2790 | skipped directories where applicable. | |
2791 | ||
50ea9d2b RL |
2792 | =item B<--target> | B<-t> |
2793 | ||
2794 | Print the config attributes for this config target. | |
2795 | ||
b1fafff6 RL |
2796 | =item B<--environment> | B<-e> |
2797 | ||
2798 | Print the environment variables and their values at the time of configuration. | |
2799 | ||
2800 | =item B<--make-variables> | B<-m> | |
2801 | ||
2802 | Print the main make variables generated in the current configuration | |
2803 | ||
2804 | =item B<--build-parameters> | B<-b> | |
2805 | ||
2806 | Print the build parameters, i.e. build file and build file templates. | |
2807 | ||
2808 | =item B<--reconfigure> | B<--reconf> | B<-r> | |
2809 | ||
2810 | Redo the configuration. | |
2811 | ||
2812 | =item B<--verbose> | B<-v> | |
2813 | ||
2814 | Verbose output. | |
2815 | ||
2816 | =back | |
2817 | ||
2818 | =cut | |
2819 | ||
2820 | EOF | |
2821 | close(OUT); | |
2822 | if ($builder_platform eq 'unix') { | |
2823 | my $mode = (0755 & ~umask); | |
2824 | chmod $mode, 'configdata.pm' | |
2825 | or warn sprintf("WARNING: Couldn't change mode for 'configdata.pm' to 0%03o: %s\n",$mode,$!); | |
2826 | } | |
cba5068d | 2827 | |
88087414 | 2828 | my %builders = ( |
9fe2bb77 | 2829 | unified => sub { |
b1fafff6 | 2830 | print 'Creating ',$target{build_file},"\n"; |
ddf1847d | 2831 | run_dofile(catfile($blddir, $target{build_file}), |
1967a42e | 2832 | @{$config{build_file_templates}}); |
9fe2bb77 | 2833 | }, |
88087414 RL |
2834 | ); |
2835 | ||
ddf1847d | 2836 | $builders{$builder}->($builder_platform, @builder_opts); |
fce0ba5f | 2837 | |
8937a4ed RL |
2838 | $SIG{__DIE__} = $orig_death_handler; |
2839 | ||
9c62a279 | 2840 | print <<"EOF" if ($disabled{threads} eq "unavailable"); |
5f8d5c96 BM |
2841 | |
2842 | The library could not be configured for supporting multi-threaded | |
2843 | applications as the compiler options required on this system are not known. | |
ff1b7e09 | 2844 | See file INSTALL for details if you need multi-threading. |
ec577822 BM |
2845 | EOF |
2846 | ||
76ffb43d | 2847 | print <<"EOF" if ($no_shared_warn); |
2964ba8c | 2848 | |
ae48242c RL |
2849 | The options 'shared', 'pic' and 'dynamic-engine' aren't supported on this |
2850 | platform, so we will pretend you gave the option 'no-pic', which also disables | |
2851 | 'shared' and 'dynamic-engine'. If you know how to implement shared libraries | |
2852 | or position independent code, please let us know (but please first make sure | |
2853 | you have tried with a current version of OpenSSL). | |
2e31ef03 RS |
2854 | EOF |
2855 | ||
820e414d RL |
2856 | print <<"EOF"; |
2857 | ||
2858 | ********************************************************************** | |
2859 | *** *** | |
41349b5e | 2860 | *** OpenSSL has been successfully configured *** |
820e414d | 2861 | *** *** |
41349b5e DMSP |
2862 | *** If you encounter a problem while building, please open an *** |
2863 | *** issue on GitHub <https://github.com/openssl/openssl/issues> *** | |
2864 | *** and include the output from the following command: *** | |
2865 | *** *** | |
2866 | *** perl configdata.pm --dump *** | |
2867 | *** *** | |
2868 | *** (If you are new to OpenSSL, you might want to consult the *** | |
2869 | *** 'Troubleshooting' section in the INSTALL file first) *** | |
820e414d RL |
2870 | *** *** |
2871 | ********************************************************************** | |
2872 | EOF | |
2873 | ||
d02b48c6 RE |
2874 | exit(0); |
2875 | ||
bd5192b1 RL |
2876 | ###################################################################### |
2877 | # | |
2878 | # Helpers and utility functions | |
2879 | # | |
2880 | ||
8937a4ed RL |
2881 | # Death handler, to print a helpful message in case of failure ####### |
2882 | # | |
2883 | sub death_handler { | |
eb807d53 | 2884 | die @_ if $^S; # To prevent the added message in eval blocks |
8937a4ed | 2885 | my $build_file = $target{build_file} // "build file"; |
eb807d53 | 2886 | my @message = ( <<"_____", @_ ); |
8937a4ed RL |
2887 | |
2888 | Failure! $build_file wasn't produced. | |
2889 | Please read INSTALL and associated NOTES files. You may also have to look over | |
2890 | your available compiler tool chain or change your configuration. | |
2891 | ||
2892 | _____ | |
eb807d53 RL |
2893 | |
2894 | # Dying is terminal, so it's ok to reset the signal handler here. | |
2895 | $SIG{__DIE__} = $orig_death_handler; | |
2896 | die @message; | |
8937a4ed RL |
2897 | } |
2898 | ||
bd5192b1 RL |
2899 | # Configuration file reading ######################################### |
2900 | ||
1f2e1cd5 RL |
2901 | # Note: All of the helper functions are for lazy evaluation. They all |
2902 | # return a CODE ref, which will return the intended value when evaluated. | |
2903 | # Thus, whenever there's mention of a returned value, it's about that | |
2904 | # intended value. | |
2905 | ||
bd5192b1 | 2906 | # Helper function to implement conditional inheritance depending on the |
00b0d663 | 2907 | # value of $disabled{asm}. Used in inherit_from values as follows: |
bd5192b1 RL |
2908 | # |
2909 | # inherit_from => [ "template", asm("asm_tmpl") ] | |
2910 | # | |
2911 | sub asm { | |
2912 | my @x = @_; | |
2913 | sub { | |
00b0d663 | 2914 | $disabled{asm} ? () : @x; |
bd5192b1 RL |
2915 | } |
2916 | } | |
2917 | ||
1f2e1cd5 RL |
2918 | # Helper function to implement conditional value variants, with a default |
2919 | # plus additional values based on the value of $config{build_type}. | |
2920 | # Arguments are given in hash table form: | |
2921 | # | |
2922 | # picker(default => "Basic string: ", | |
2923 | # debug => "debug", | |
2924 | # release => "release") | |
2925 | # | |
2926 | # When configuring with --debug, the resulting string will be | |
2927 | # "Basic string: debug", and when not, it will be "Basic string: release" | |
2928 | # | |
2929 | # This can be used to create variants of sets of flags according to the | |
2930 | # build type: | |
2931 | # | |
2932 | # cflags => picker(default => "-Wall", | |
2933 | # debug => "-g -O0", | |
2934 | # release => "-O3") | |
2935 | # | |
2936 | sub picker { | |
2937 | my %opts = @_; | |
2938 | return sub { add($opts{default} || (), | |
2939 | $opts{$config{build_type}} || ())->(); } | |
2940 | } | |
2941 | ||
2942 | # Helper function to combine several values of different types into one. | |
2943 | # This is useful if you want to combine a string with the result of a | |
2944 | # lazy function, such as: | |
2945 | # | |
2946 | # cflags => combine("-Wall", sub { $disabled{zlib} ? () : "-DZLIB" }) | |
2947 | # | |
2948 | sub combine { | |
2949 | my @stuff = @_; | |
2950 | return sub { add(@stuff)->(); } | |
2951 | } | |
2952 | ||
2953 | # Helper function to implement conditional values depending on the value | |
2954 | # of $disabled{threads}. Can be used as follows: | |
2955 | # | |
2956 | # cflags => combine("-Wall", threads("-pthread")) | |
2957 | # | |
2958 | sub threads { | |
2959 | my @flags = @_; | |
2960 | return sub { add($disabled{threads} ? () : @flags)->(); } | |
2961 | } | |
2962 | ||
60aa6c1a AP |
2963 | sub shared { |
2964 | my @flags = @_; | |
2965 | return sub { add($disabled{shared} ? () : @flags)->(); } | |
2966 | } | |
1f2e1cd5 | 2967 | |
9c62a279 | 2968 | our $add_called = 0; |
88087414 RL |
2969 | # Helper function to implement adding values to already existing configuration |
2970 | # values. It handles elements that are ARRAYs, CODEs and scalars | |
2971 | sub _add { | |
2972 | my $separator = shift; | |
2973 | ||
bcb1977b RL |
2974 | # If there's any ARRAY in the collection of values OR the separator |
2975 | # is undef, we will return an ARRAY of combined values, otherwise a | |
2976 | # string of joined values with $separator as the separator. | |
2977 | my $found_array = !defined($separator); | |
88087414 RL |
2978 | |
2979 | my @values = | |
2980 | map { | |
b0b92a5b RL |
2981 | my $res = $_; |
2982 | while (ref($res) eq "CODE") { | |
2983 | $res = $res->(); | |
2984 | } | |
2985 | if (defined($res)) { | |
2986 | if (ref($res) eq "ARRAY") { | |
2987 | $found_array = 1; | |
2988 | @$res; | |
2989 | } else { | |
2990 | $res; | |
2991 | } | |
88087414 | 2992 | } else { |
b0b92a5b | 2993 | (); |
88087414 RL |
2994 | } |
2995 | } (@_); | |
2996 | ||
9c62a279 RL |
2997 | $add_called = 1; |
2998 | ||
88087414 RL |
2999 | if ($found_array) { |
3000 | [ @values ]; | |
3001 | } else { | |
b0b92a5b | 3002 | join($separator, grep { defined($_) && $_ ne "" } @values); |
88087414 RL |
3003 | } |
3004 | } | |
3005 | sub add_before { | |
bdcd83e1 RL |
3006 | my $separator = " "; |
3007 | if (ref($_[$#_]) eq "HASH") { | |
3008 | my $opts = pop; | |
3009 | $separator = $opts->{separator}; | |
3010 | } | |
88087414 RL |
3011 | my @x = @_; |
3012 | sub { _add($separator, @x, @_) }; | |
3013 | } | |
3014 | sub add { | |
bdcd83e1 RL |
3015 | my $separator = " "; |
3016 | if (ref($_[$#_]) eq "HASH") { | |
3017 | my $opts = pop; | |
3018 | $separator = $opts->{separator}; | |
3019 | } | |
88087414 RL |
3020 | my @x = @_; |
3021 | sub { _add($separator, @_, @x) }; | |
3022 | } | |
3023 | ||
3b6c4b07 RL |
3024 | sub read_eval_file { |
3025 | my $fname = shift; | |
3026 | my $content; | |
3027 | my @result; | |
3028 | ||
3029 | open F, "< $fname" or die "Can't open '$fname': $!\n"; | |
3030 | { | |
3031 | undef local $/; | |
3032 | $content = <F>; | |
3033 | } | |
3034 | close F; | |
3035 | { | |
3036 | local $@; | |
3037 | ||
3038 | @result = ( eval $content ); | |
3039 | warn $@ if $@; | |
3040 | } | |
3041 | return wantarray ? @result : $result[0]; | |
3042 | } | |
3043 | ||
bd5192b1 RL |
3044 | # configuration reader, evaluates the input file as a perl script and expects |
3045 | # it to fill %targets with target configurations. Those are then added to | |
3046 | # %table. | |
3047 | sub read_config { | |
3048 | my $fname = shift; | |
3b6c4b07 RL |
3049 | my %targets; |
3050 | ||
bd5192b1 | 3051 | { |
ee9b0bbb | 3052 | # Protect certain tables from tampering |
3b6c4b07 | 3053 | local %table = (); |
bd5192b1 | 3054 | |
3b6c4b07 | 3055 | %targets = read_eval_file($fname); |
bd5192b1 | 3056 | } |
225f980d RL |
3057 | my %preexisting = (); |
3058 | foreach (sort keys %targets) { | |
3059 | $preexisting{$_} = 1 if $table{$_}; | |
3060 | } | |
3061 | die <<"EOF", | |
3062 | The following config targets from $fname | |
3063 | shadow pre-existing config targets with the same name: | |
3064 | EOF | |
3065 | map { " $_\n" } sort keys %preexisting | |
3066 | if %preexisting; | |
3067 | ||
bd5192b1 RL |
3068 | |
3069 | # For each target, check that it's configured with a hash table. | |
3070 | foreach (keys %targets) { | |
3071 | if (ref($targets{$_}) ne "HASH") { | |
3072 | if (ref($targets{$_}) eq "") { | |
3073 | warn "Deprecated target configuration for $_, ignoring...\n"; | |
3074 | } else { | |
3075 | warn "Misconfigured target configuration for $_ (should be a hash table), ignoring...\n"; | |
3076 | } | |
3077 | delete $targets{$_}; | |
ee9b0bbb RL |
3078 | } else { |
3079 | $targets{$_}->{_conf_fname_int} = add([ $fname ]); | |
3080 | } | |
bd5192b1 RL |
3081 | } |
3082 | ||
3083 | %table = (%table, %targets); | |
3084 | ||
3085 | } | |
3086 | ||
8483a003 F |
3087 | # configuration resolver. Will only resolve all the lazy evaluation |
3088 | # codeblocks for the chosen target and all those it inherits from, | |
bd5192b1 RL |
3089 | # recursively |
3090 | sub resolve_config { | |
3091 | my $target = shift; | |
3092 | my @breadcrumbs = @_; | |
3093 | ||
c4718849 | 3094 | # my $extra_checks = defined($ENV{CONFIGURE_EXTRA_CHECKS}); |
9c62a279 | 3095 | |
bd5192b1 RL |
3096 | if (grep { $_ eq $target } @breadcrumbs) { |
3097 | die "inherit_from loop! target backtrace:\n " | |
3098 | ,$target,"\n ",join("\n ", @breadcrumbs),"\n"; | |
3099 | } | |
3100 | ||
3101 | if (!defined($table{$target})) { | |
3102 | warn "Warning! target $target doesn't exist!\n"; | |
3103 | return (); | |
3104 | } | |
3105 | # Recurse through all inheritances. They will be resolved on the | |
3106 | # fly, so when this operation is done, they will all just be a | |
3107 | # bunch of attributes with string values. | |
3108 | # What we get here, though, are keys with references to lists of | |
3109 | # the combined values of them all. We will deal with lists after | |
3110 | # this stage is done. | |
3111 | my %combined_inheritance = (); | |
3112 | if ($table{$target}->{inherit_from}) { | |
3113 | my @inherit_from = | |
3114 | map { ref($_) eq "CODE" ? $_->() : $_ } @{$table{$target}->{inherit_from}}; | |
3115 | foreach (@inherit_from) { | |
3116 | my %inherited_config = resolve_config($_, $target, @breadcrumbs); | |
3117 | ||
3118 | # 'template' is a marker that's considered private to | |
3119 | # the config that had it. | |
3120 | delete $inherited_config{template}; | |
3121 | ||
2110febb | 3122 | foreach (keys %inherited_config) { |
bd5192b1 RL |
3123 | if (!$combined_inheritance{$_}) { |
3124 | $combined_inheritance{$_} = []; | |
3125 | } | |
3126 | push @{$combined_inheritance{$_}}, $inherited_config{$_}; | |
2110febb | 3127 | } |
bd5192b1 RL |
3128 | } |
3129 | } | |
3130 | ||
3131 | # We won't need inherit_from in this target any more, since we've | |
3132 | # resolved all the inheritances that lead to this | |
3133 | delete $table{$target}->{inherit_from}; | |
3134 | ||
3135 | # Now is the time to deal with those lists. Here's the place to | |
3136 | # decide what shall be done with those lists, all based on the | |
3137 | # values of the target we're currently dealing with. | |
3138 | # - If a value is a coderef, it will be executed with the list of | |
3139 | # inherited values as arguments. | |
3140 | # - If the corresponding key doesn't have a value at all or is the | |
8483a003 | 3141 | # empty string, the inherited value list will be run through the |
bd5192b1 RL |
3142 | # default combiner (below), and the result becomes this target's |
3143 | # value. | |
3144 | # - Otherwise, this target's value is assumed to be a string that | |
3145 | # will simply override the inherited list of values. | |
a26d8be9 | 3146 | my $default_combiner = add(); |
bd5192b1 RL |
3147 | |
3148 | my %all_keys = | |
3149 | map { $_ => 1 } (keys %combined_inheritance, | |
3150 | keys %{$table{$target}}); | |
b0b92a5b RL |
3151 | |
3152 | sub process_values { | |
3153 | my $object = shift; | |
3154 | my $inherited = shift; # Always a [ list ] | |
3155 | my $target = shift; | |
3156 | my $entry = shift; | |
3157 | ||
9c62a279 RL |
3158 | $add_called = 0; |
3159 | ||
b0b92a5b RL |
3160 | while(ref($object) eq "CODE") { |
3161 | $object = $object->(@$inherited); | |
3162 | } | |
3163 | if (!defined($object)) { | |
3164 | return (); | |
3165 | } | |
3166 | elsif (ref($object) eq "ARRAY") { | |
9c62a279 | 3167 | local $add_called; # To make sure recursive calls don't affect it |
b0b92a5b RL |
3168 | return [ map { process_values($_, $inherited, $target, $entry) } |
3169 | @$object ]; | |
3170 | } elsif (ref($object) eq "") { | |
3171 | return $object; | |
3172 | } else { | |
3173 | die "cannot handle reference type ",ref($object) | |
3174 | ," found in target ",$target," -> ",$entry,"\n"; | |
3175 | } | |
3176 | } | |
3177 | ||
bd5192b1 | 3178 | foreach (sort keys %all_keys) { |
9c62a279 | 3179 | my $previous = $combined_inheritance{$_}; |
bd5192b1 RL |
3180 | |
3181 | # Current target doesn't have a value for the current key? | |
3182 | # Assign it the default combiner, the rest of this loop body | |
3183 | # will handle it just like any other coderef. | |
3184 | if (!exists $table{$target}->{$_}) { | |
3185 | $table{$target}->{$_} = $default_combiner; | |
3186 | } | |
3187 | ||
b0b92a5b RL |
3188 | $table{$target}->{$_} = process_values($table{$target}->{$_}, |
3189 | $combined_inheritance{$_}, | |
3190 | $target, $_); | |
3191 | unless(defined($table{$target}->{$_})) { | |
3192 | delete $table{$target}->{$_}; | |
3193 | } | |
c4718849 RL |
3194 | # if ($extra_checks && |
3195 | # $previous && !($add_called || $previous ~~ $table{$target}->{$_})) { | |
3196 | # warn "$_ got replaced in $target\n"; | |
3197 | # } | |
bd5192b1 RL |
3198 | } |
3199 | ||
3200 | # Finally done, return the result. | |
3201 | return %{$table{$target}}; | |
3202 | } | |
3203 | ||
462ba4f6 | 3204 | sub usage |
d02b48c6 | 3205 | { |
462ba4f6 | 3206 | print STDERR $usage; |
10a926c1 | 3207 | print STDERR "\npick os/compiler from:\n"; |
1641cb60 | 3208 | my $j=0; |
6457ad15 | 3209 | my $i; |
10a926c1 | 3210 | my $k=0; |
6457ad15 | 3211 | foreach $i (sort keys %table) |
d02b48c6 | 3212 | { |
bd5192b1 | 3213 | next if $table{$i}->{template}; |
462ba4f6 | 3214 | next if $i =~ /^debug/; |
10a926c1 UM |
3215 | $k += length($i) + 1; |
3216 | if ($k > 78) | |
3217 | { | |
3218 | print STDERR "\n"; | |
3219 | $k=length($i); | |
3220 | } | |
3221 | print STDERR $i . " "; | |
462ba4f6 UM |
3222 | } |
3223 | foreach $i (sort keys %table) | |
3224 | { | |
bd5192b1 | 3225 | next if $table{$i}->{template}; |
462ba4f6 | 3226 | next if $i !~ /^debug/; |
10a926c1 UM |
3227 | $k += length($i) + 1; |
3228 | if ($k > 78) | |
3229 | { | |
3230 | print STDERR "\n"; | |
3231 | $k=length($i); | |
3232 | } | |
3233 | print STDERR $i . " "; | |
d02b48c6 | 3234 | } |
10a926c1 | 3235 | print STDERR "\n\nNOTE: If in doubt, on Unix-ish systems use './config'.\n"; |
462ba4f6 | 3236 | exit(1); |
d02b48c6 RE |
3237 | } |
3238 | ||
01d99976 | 3239 | sub run_dofile |
107b5792 | 3240 | { |
107b5792 | 3241 | my $out = shift; |
9fe2bb77 | 3242 | my @templates = @_; |
107b5792 | 3243 | |
ced2c2c5 RS |
3244 | unlink $out || warn "Can't remove $out, $!" |
3245 | if -f $out; | |
9fe2bb77 RL |
3246 | foreach (@templates) { |
3247 | die "Can't open $_, $!" unless -f $_; | |
3248 | } | |
9e265322 | 3249 | my $perlcmd = (quotify("maybeshell", $config{PERL}))[0]; |
f879d5ff | 3250 | my $cmd = "$perlcmd \"-I.\" \"-Mconfigdata\" \"$dofile\" -o\"Configure\" \"".join("\" \"",@templates)."\" > \"$out.new\""; |
9fe2bb77 RL |
3251 | #print STDERR "DEBUG[run_dofile]: \$cmd = $cmd\n"; |
3252 | system($cmd); | |
107b5792 RL |
3253 | exit 1 if $? != 0; |
3254 | rename("$out.new", $out) || die "Can't rename $out.new, $!"; | |
3255 | } | |
3256 | ||
6d75a83c RL |
3257 | sub compiler_predefined { |
3258 | state %predefined; | |
41d6e0f3 | 3259 | my $cc = shift; |
6d75a83c RL |
3260 | |
3261 | return () if $^O eq 'VMS'; | |
3262 | ||
41d6e0f3 AP |
3263 | die 'compiler_predefined called without a compiler command' |
3264 | unless $cc; | |
6d75a83c | 3265 | |
41d6e0f3 | 3266 | if (! $predefined{$cc}) { |
6d75a83c | 3267 | |
41d6e0f3 | 3268 | $predefined{$cc} = {}; |
6d75a83c RL |
3269 | |
3270 | # collect compiler pre-defines from gcc or gcc-alike... | |
3271 | open(PIPE, "$cc -dM -E -x c /dev/null 2>&1 |"); | |
3272 | while (my $l = <PIPE>) { | |
3273 | $l =~ m/^#define\s+(\w+(?:\(\w+\))?)(?:\s+(.+))?/ or last; | |
41d6e0f3 | 3274 | $predefined{$cc}->{$1} = $2 // ''; |
6d75a83c RL |
3275 | } |
3276 | close(PIPE); | |
3277 | } | |
3278 | ||
41d6e0f3 | 3279 | return %{$predefined{$cc}}; |
6d75a83c RL |
3280 | } |
3281 | ||
656bbdc6 AP |
3282 | sub which |
3283 | { | |
3284 | my ($name)=@_; | |
3285 | ||
3286 | if (eval { require IPC::Cmd; 1; }) { | |
3287 | IPC::Cmd->import(); | |
3288 | return scalar IPC::Cmd::can_run($name); | |
3289 | } else { | |
3290 | # if there is $directories component in splitpath, | |
3291 | # then it's not something to test with $PATH... | |
3292 | return $name if (File::Spec->splitpath($name))[1]; | |
3293 | ||
3294 | foreach (File::Spec->path()) { | |
3295 | my $fullpath = catfile($_, "$name$target{exe_extension}"); | |
3296 | if (-f $fullpath and -x $fullpath) { | |
3297 | return $fullpath; | |
3298 | } | |
3299 | } | |
3300 | } | |
3301 | } | |
3302 | ||
7ecdf18d RL |
3303 | sub env |
3304 | { | |
3305 | my $name = shift; | |
ac6ae8a9 | 3306 | my %opts = @_; |
7ecdf18d | 3307 | |
ac6ae8a9 RL |
3308 | unless ($opts{cacheonly}) { |
3309 | # Note that if $ENV{$name} doesn't exist or is undefined, | |
3310 | # $config{perlenv}->{$name} will be created with the value | |
3311 | # undef. This is intentional. | |
89bea083 | 3312 | |
ac6ae8a9 RL |
3313 | $config{perlenv}->{$name} = $ENV{$name} |
3314 | if ! exists $config{perlenv}->{$name}; | |
3315 | } | |
7ecdf18d RL |
3316 | return $config{perlenv}->{$name}; |
3317 | } | |
3318 | ||
00ae96ca RL |
3319 | # Configuration printer ############################################## |
3320 | ||
3321 | sub print_table_entry | |
3322 | { | |
f770d75b AP |
3323 | local $now_printing = shift; |
3324 | my %target = resolve_config($now_printing); | |
00ae96ca RL |
3325 | my $type = shift; |
3326 | ||
3327 | # Don't print the templates | |
3328 | return if $target{template}; | |
3329 | ||
3330 | my @sequence = ( | |
f0bd4686 | 3331 | "sys_id", |
8c3bc594 RL |
3332 | "cpp", |
3333 | "cppflags", | |
3334 | "defines", | |
3335 | "includes", | |
00ae96ca RL |
3336 | "cc", |
3337 | "cflags", | |
f0bd4686 RL |
3338 | "unistd", |
3339 | "ld", | |
00ae96ca | 3340 | "lflags", |
0c0d78b8 | 3341 | "loutflag", |
1740c162 | 3342 | "ex_libs", |
00ae96ca | 3343 | "bn_ops", |
0c0d78b8 RL |
3344 | "apps_aux_src", |
3345 | "cpuid_asm_src", | |
3346 | "uplink_aux_src", | |
3347 | "bn_asm_src", | |
3348 | "ec_asm_src", | |
3349 | "des_asm_src", | |
3350 | "aes_asm_src", | |
3351 | "bf_asm_src", | |
3352 | "md5_asm_src", | |
3353 | "cast_asm_src", | |
3354 | "sha1_asm_src", | |
3355 | "rc4_asm_src", | |
3356 | "rmd160_asm_src", | |
3357 | "rc5_asm_src", | |
3358 | "wp_asm_src", | |
3359 | "cmll_asm_src", | |
3360 | "modes_asm_src", | |
3361 | "padlock_asm_src", | |
3362 | "chacha_asm_src", | |
3363 | "poly1035_asm_src", | |
9c62a279 | 3364 | "thread_scheme", |
00ae96ca RL |
3365 | "perlasm_scheme", |
3366 | "dso_scheme", | |
3367 | "shared_target", | |
3368 | "shared_cflag", | |
0c0d78b8 | 3369 | "shared_defines", |
00ae96ca | 3370 | "shared_ldflag", |
64c443e3 | 3371 | "shared_rcflag", |
00ae96ca | 3372 | "shared_extension", |
e987f9f2 | 3373 | "dso_extension", |
f0bd4686 RL |
3374 | "obj_extension", |
3375 | "exe_extension", | |
00ae96ca | 3376 | "ranlib", |
f0bd4686 | 3377 | "ar", |
00ae96ca | 3378 | "arflags", |
0c0d78b8 RL |
3379 | "aroutflag", |
3380 | "rc", | |
3381 | "rcflags", | |
3382 | "rcoutflag", | |
3383 | "mt", | |
3384 | "mtflags", | |
3385 | "mtinflag", | |
3386 | "mtoutflag", | |
00ae96ca | 3387 | "multilib", |
f0bd4686 | 3388 | "build_scheme", |
00ae96ca RL |
3389 | ); |
3390 | ||
3391 | if ($type eq "TABLE") { | |
3392 | print "\n"; | |
f770d75b | 3393 | print "*** $now_printing\n"; |
cb212f23 RL |
3394 | foreach (@sequence) { |
3395 | if (ref($target{$_}) eq "ARRAY") { | |
3396 | printf "\$%-12s = %s\n", $_, join(" ", @{$target{$_}}); | |
3397 | } else { | |
3398 | printf "\$%-12s = %s\n", $_, $target{$_}; | |
3399 | } | |
3400 | } | |
00ae96ca RL |
3401 | } elsif ($type eq "HASH") { |
3402 | my $largest = | |
3403 | length((sort { length($a) <=> length($b) } @sequence)[-1]); | |
f770d75b | 3404 | print " '$now_printing' => {\n"; |
00ae96ca RL |
3405 | foreach (@sequence) { |
3406 | if ($target{$_}) { | |
cb212f23 RL |
3407 | if (ref($target{$_}) eq "ARRAY") { |
3408 | print " '",$_,"'"," " x ($largest - length($_))," => [ ",join(", ", map { "'$_'" } @{$target{$_}})," ],\n"; | |
3409 | } else { | |
3410 | print " '",$_,"'"," " x ($largest - length($_))," => '",$target{$_},"',\n"; | |
3411 | } | |
00ae96ca RL |
3412 | } |
3413 | } | |
3414 | print " },\n"; | |
3415 | } | |
3416 | } | |
3417 | ||
3418 | # Utility routines ################################################### | |
3419 | ||
2e963849 RL |
3420 | # On VMS, if the given file is a logical name, File::Spec::Functions |
3421 | # will consider it an absolute path. There are cases when we want a | |
3422 | # purely syntactic check without checking the environment. | |
3423 | sub isabsolute { | |
3424 | my $file = shift; | |
3425 | ||
3426 | # On non-platforms, we just use file_name_is_absolute(). | |
3427 | return file_name_is_absolute($file) unless $^O eq "VMS"; | |
3428 | ||
69687aa8 | 3429 | # If the file spec includes a device or a directory spec, |
2e963849 RL |
3430 | # file_name_is_absolute() is perfectly safe. |
3431 | return file_name_is_absolute($file) if $file =~ m|[:\[]|; | |
3432 | ||
3433 | # Here, we know the given file spec isn't absolute | |
3434 | return 0; | |
3435 | } | |
3436 | ||
ec182ef0 RL |
3437 | # Makes a directory absolute and cleans out /../ in paths like foo/../bar |
3438 | # On some platforms, this uses rel2abs(), while on others, realpath() is used. | |
3439 | # realpath() requires that at least all path components except the last is an | |
3440 | # existing directory. On VMS, the last component of the directory spec must | |
3441 | # exist. | |
3442 | sub absolutedir { | |
3443 | my $dir = shift; | |
3444 | ||
3445 | # realpath() is quite buggy on VMS. It uses LIB$FID_TO_NAME, which | |
3446 | # will return the volume name for the device, no matter what. Also, | |
3447 | # it will return an incorrect directory spec if the argument is a | |
3448 | # directory that doesn't exist. | |
3449 | if ($^O eq "VMS") { | |
3450 | return rel2abs($dir); | |
3451 | } | |
3452 | ||
3453 | # We use realpath() on Unix, since no other will properly clean out | |
3454 | # a directory spec. | |
3455 | use Cwd qw/realpath/; | |
3456 | ||
3457 | return realpath($dir); | |
3458 | } | |
3459 | ||
fe05264e RL |
3460 | sub quotify { |
3461 | my %processors = ( | |
3462 | perl => sub { my $x = shift; | |
3463 | $x =~ s/([\\\$\@"])/\\$1/g; | |
3464 | return '"'.$x.'"'; }, | |
f879d5ff RL |
3465 | maybeshell => sub { my $x = shift; |
3466 | (my $y = $x) =~ s/([\\\"])/\\$1/g; | |
3467 | if ($x ne $y || $x =~ m|\s|) { | |
3468 | return '"'.$y.'"'; | |
3469 | } else { | |
3470 | return $x; | |
3471 | } | |
3472 | }, | |
fe05264e RL |
3473 | ); |
3474 | my $for = shift; | |
3475 | my $processor = | |
3476 | defined($processors{$for}) ? $processors{$for} : sub { shift; }; | |
3477 | ||
2110febb | 3478 | return map { $processor->($_); } @_; |
fe05264e | 3479 | } |
107b5792 | 3480 | |
9fe2bb77 RL |
3481 | # collect_from_file($filename, $line_concat_cond_re, $line_concat) |
3482 | # $filename is a file name to read from | |
3483 | # $line_concat_cond_re is a regexp detecting a line continuation ending | |
3484 | # $line_concat is a CODEref that takes care of concatenating two lines | |
3485 | sub collect_from_file { | |
3486 | my $filename = shift; | |
3487 | my $line_concat_cond_re = shift; | |
3488 | my $line_concat = shift; | |
3489 | ||
3490 | open my $fh, $filename || die "unable to read $filename: $!\n"; | |
3491 | return sub { | |
3492 | my $saved_line = ""; | |
3493 | $_ = ""; | |
3494 | while (<$fh>) { | |
04f171c0 | 3495 | s|\R$||; |
9fe2bb77 RL |
3496 | if (defined $line_concat) { |
3497 | $_ = $line_concat->($saved_line, $_); | |
3498 | $saved_line = ""; | |
3499 | } | |
3500 | if (defined $line_concat_cond_re && /$line_concat_cond_re/) { | |
3501 | $saved_line = $_; | |
3502 | next; | |
3503 | } | |
3504 | return $_; | |
3505 | } | |
3506 | die "$filename ending with continuation line\n" if $_; | |
3507 | close $fh; | |
3508 | return undef; | |
3509 | } | |
3510 | } | |
3511 | ||
3512 | # collect_from_array($array, $line_concat_cond_re, $line_concat) | |
3513 | # $array is an ARRAYref of lines | |
3514 | # $line_concat_cond_re is a regexp detecting a line continuation ending | |
3515 | # $line_concat is a CODEref that takes care of concatenating two lines | |
3516 | sub collect_from_array { | |
3517 | my $array = shift; | |
3518 | my $line_concat_cond_re = shift; | |
3519 | my $line_concat = shift; | |
3520 | my @array = (@$array); | |
3521 | ||
3522 | return sub { | |
3523 | my $saved_line = ""; | |
3524 | $_ = ""; | |
3525 | while (defined($_ = shift @array)) { | |
04f171c0 | 3526 | s|\R$||; |
9fe2bb77 RL |
3527 | if (defined $line_concat) { |
3528 | $_ = $line_concat->($saved_line, $_); | |
3529 | $saved_line = ""; | |
3530 | } | |
3531 | if (defined $line_concat_cond_re && /$line_concat_cond_re/) { | |
3532 | $saved_line = $_; | |
3533 | next; | |
3534 | } | |
3535 | return $_; | |
3536 | } | |
3537 | die "input text ending with continuation line\n" if $_; | |
3538 | return undef; | |
3539 | } | |
3540 | } | |
3541 | ||
3542 | # collect_information($lineiterator, $line_continue, $regexp => $CODEref, ...) | |
3543 | # $lineiterator is a CODEref that delivers one line at a time. | |
107b5792 RL |
3544 | # All following arguments are regex/CODEref pairs, where the regexp detects a |
3545 | # line and the CODEref does something with the result of the regexp. | |
3546 | sub collect_information { | |
9fe2bb77 | 3547 | my $lineiterator = shift; |
107b5792 RL |
3548 | my %collectors = @_; |
3549 | ||
9fe2bb77 | 3550 | while(defined($_ = $lineiterator->())) { |
04f171c0 | 3551 | s|\R$||; |
9fe2bb77 | 3552 | my $found = 0; |
2b6b606c RL |
3553 | if ($collectors{"BEFORE"}) { |
3554 | $collectors{"BEFORE"}->($_); | |
3555 | } | |
9fe2bb77 | 3556 | foreach my $re (keys %collectors) { |
2b6b606c | 3557 | if ($re !~ /^OTHERWISE|BEFORE|AFTER$/ && /$re/) { |
9fe2bb77 RL |
3558 | $collectors{$re}->($lineiterator); |
3559 | $found = 1; | |
3560 | }; | |
3561 | } | |
3562 | if ($collectors{"OTHERWISE"}) { | |
3563 | $collectors{"OTHERWISE"}->($lineiterator, $_) | |
3564 | unless $found || !defined $collectors{"OTHERWISE"}; | |
3565 | } | |
2b6b606c RL |
3566 | if ($collectors{"AFTER"}) { |
3567 | $collectors{"AFTER"}->($_); | |
3568 | } | |
107b5792 | 3569 | } |
107b5792 | 3570 | } |
ce959812 RL |
3571 | |
3572 | # tokenize($line) | |
3573 | # $line is a line of text to split up into tokens | |
3574 | # returns a list of tokens | |
3575 | # | |
3576 | # Tokens are divided by spaces. If the tokens include spaces, they | |
3577 | # have to be quoted with single or double quotes. Double quotes | |
3578 | # inside a double quoted token must be escaped. Escaping is done | |
3579 | # with backslash. | |
3580 | # Basically, the same quoting rules apply for " and ' as in any | |
3581 | # Unix shell. | |
3582 | sub tokenize { | |
3583 | my $line = my $debug_line = shift; | |
3584 | my @result = (); | |
3585 | ||
3586 | while ($line =~ s|^\s+||, $line ne "") { | |
3587 | my $token = ""; | |
3588 | while ($line ne "" && $line !~ m|^\s|) { | |
3589 | if ($line =~ m/^"((?:[^"\\]+|\\.)*)"/) { | |
3590 | $token .= $1; | |
3591 | $line = $'; | |
3592 | } elsif ($line =~ m/^'([^']*)'/) { | |
3593 | $token .= $1; | |
3594 | $line = $'; | |
3595 | } elsif ($line =~ m/^(\S+)/) { | |
3596 | $token .= $1; | |
3597 | $line = $'; | |
3598 | } | |
3599 | } | |
3600 | push @result, $token; | |
3601 | } | |
3602 | ||
3603 | if ($ENV{CONFIGURE_DEBUG_TOKENIZE}) { | |
3604 | print STDERR "DEBUG[tokenize]: Parsed '$debug_line' into:\n"; | |
3605 | print STDERR "DEBUG[tokenize]: ('", join("', '", @result), "')\n"; | |
3606 | } | |
3607 | return @result; | |
3608 | } |