push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open OUT,">$output";
-*STDOUT=*OUT;
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0],$x86only = $ARGV[$#ARGV] eq "386");
&static_label("AES_Te");
# Profiler-assisted and platform-specific optimization resulted in 16%
# improvement on Cortex A8 core and ~21.5 cycles per byte.
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$s0="r0";
# cost of 8x increased pressure on L1D. 8x because you'd have
# to interleave both Te and Td tables...
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
($TEA,$TEB)=("A5","B5");
($KPA,$KPB)=("A3","B1");
# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
-#
-$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+$flavour ||= "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
if ($flavour =~ /64|n32/i) {
$PTR_LA="dla";
$big_endian=(`echo MIPSEB | $ENV{CC} -E -`=~/MIPSEB/)?0:1 if ($ENV{CC});
-for (@ARGV) { $output=$_ if (/\w[\w\-]*\.\w+$/); }
-open STDOUT,">$output";
-
if (!defined($big_endian))
{ $big_endian=(unpack('L',pack('N',1))==1); }
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
-
my ($MSB,$LSB)=(0,3); # automatically converted to little-endian
+$output and open STDOUT,">$output";
+
$code.=<<___;
#include "mips_arch.h"
#
# Special thanks to polarhome.com for providing HP-UX account.
-$flavour = shift;
-$output = shift;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
# ppc_AES_encrypt_compact operates at 42 cycles per byte, while
# ppc_AES_decrypt_compact - at 55 (in 64-bit build).
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$FRAME=32*$SIZE_T;
# instructions, which deliver ~70% improvement at 8KB block size over
# vanilla km-based code, 37% - at most like 512-bytes block size.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
$softonly=0; # allow hardware support
# optimal decrypt procedure]. Compared to GNU C generated code both
# procedures are more than 60% faster:-)
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$frame="STACK_FRAME";
$bias="STACK_BIAS";
#
# (*) with hyper-threading off
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$verticalspin=1; # unlike 32-bit version $verticalspin performs
# instructions and improve single-block and short-input performance
# with misaligned data.
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
{
my ($inp,$out,$key,$rounds,$tmp,$mask) = map("%o$_",(0..5));
# (*) Sandy/Ivy Bridge are known to handle high interleave factors
# suboptimally;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$avx = ($2>=3.0) + ($2>3.0);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
# void aesni_multi_cbc_encrypt (
# (**) Execution is fully dominated by integer code sequence and
# SIMD still hardly shows [in single-process benchmark;-]
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$stitched_decrypt=0;
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
# void aesni_cbc_sha1_enc(const void *inp,
# -evp aes-256-cbc-hmac-sha256' will vary by percent or two;
# (***) these are SHAEXT results;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$shaext=$avx; ### set to zero if compiling for 1.0.1
$avx=1 if (!$shaext && $avx);
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$func="aesni_cbc_sha256_enc";
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open OUT,">$output";
-*STDOUT=*OUT;
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# generates drop-in replacement for
# crypto/aes/asm/aes-x86_64.pl:-)
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$movkey = $PREFIX eq "aesni" ? "movups" : "movups";
# POWER9[le] 4.02/0.86 0.84 1.05
# POWER9[be] 3.99/0.78 0.79 0.97
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$FRAME=8*$SIZE_T;
$prefix="aes_p8";
push(@INC,"${dir}","${dir}../../perlasm");
require "sparcv9_modes.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$::evp=1; # if $evp is set to 0, script generates module with
# AES_[en|de]crypt, AES_set_[en|de]crypt_key and AES_cbc_encrypt entry
# (**) numbers after slash are for 32-bit code, which is 3x-
# interleaved;
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$prefix="aes_v8";
# April-August 2013
# Add CBC, CTR and XTS subroutines and adapt for kernel use; courtesy of Ard.
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
my ($inp,$out,$len,$key)=("r0","r1","r2","r3");
#
# <appro@openssl.org>
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my ($inp,$out,$len,$key,$ivp)=("%rdi","%rsi","%rdx","%rcx");
# code, but it's constant-time and therefore preferred;
# (***) presented for reference/comparison purposes;
-$flavour = shift;
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$code.=<<___;
# (**) Inadequate POWER6 performance is due to astronomic AltiVec
# latency, 9 cycles per simple logical operation.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ || die "can't call $xlate: $!";
$code.=<<___;
.machine "any"
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open OUT,">$output";
-*STDOUT=*OUT;
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0],$x86only = $ARGV[$#ARGV] eq "386");
#
# <appro@openssl.org>
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$PREFIX="vpaes";
# https://www.openssl.org/source/license.html
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
print <<'___';
.text
# https://www.openssl.org/source/license.html
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$code.=<<___;
# https://www.openssl.org/source/license.html
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$code.=<<___;
require "x86asm.pl";
require "cbc.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
# I.e. if you compare 1GHz 21264 and 2GHz Opteron, you'll observe ~2x
# difference.
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
# int bn_mul_mont(
$rp="a0"; # BN_ULONG *rp,
#
# http://conradoplg.cryptoland.net/files/2010/12/mocrysen13.pdf
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $1";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$code=<<___;
# integer-only on Cortex-A8, ~10-210% on Cortex-A15, ~70-450% on
# Snapdragon S4.
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $1";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$num="r0"; # starts as num argument, but holds &tp[num-1]
# 50-70% improvement for RSA4096 sign. RSA2048 sign is ~25% faster
# on Cortex-A57 and ~60-100% faster on others.
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $1";
*STDOUT=*OUT;
($lo0,$hi0,$aj,$m0,$alo,$ahi,
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# totally unfair, because this module utilizes Galois Field Multiply
# instruction.
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
($rp,$a1,$a0,$b1,$b0)=("A4","B4","A6","B6","A8"); # argument vector
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# hereafter less for longer keys, while verify - by 74-13%.
# DSA performance improves by 115-30%.
-$output=pop;
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
if ($^O eq "hpux") {
$ADDP="addp4";
# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
-#
-$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+# supported flavours are o32,n32,64,nubi32,nubi64, default is o32
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : "o32";
if ($flavour =~ /64|n32/i) {
$PTR_ADD="daddu"; # incidentally works even on n32
#
######################################################################
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
if ($flavour =~ /64|n32/i) {
$LD="ld";
# has to content with 40-85% improvement depending on benchmark and
# key length, more for longer keys.
-$flavour = shift || "o32";
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : "o32";
if ($flavour =~ /64|n32/i) {
$LD="ld";
$code="#if !(defined (__mips_isa_rev) && (__mips_isa_rev >= 6))\n.set mips2\n#endif\n";
}
+$output and open STDOUT,">$output";
+
# Below is N32/64 register layout used in the original module.
#
($zero,$at,$v0,$v1)=map("\$$_",(0..3));
\f
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
# builds. On low-end 32-bit processors performance improvement turned
# to be marginal...
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /32/) {
$BITS= 32;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$sp="r1";
$toc="r2";
# Performance increase of ~60%
# Based on submission from Suresh N. Chari of IBM
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /32/) {
$BITS= 32;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$data=<<EOF;
#--------------------------------------------------------------------
# ppc-mont.pl, but improvement coefficient is not as impressive
# for longer keys...
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /32/) {
$SIZE_T=4;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$FRAME=64; # padded frame header
$TRANSFER=16*8;
# (***) scalar AD*X code is faster than AVX2 and is preferred code
# path for Broadwell;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$addx = ($ver>=3.03);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT = *OUT;
if ($avx>1) {{{
# purposes;
# (**) MULX was attempted, but found to give only marginal improvement;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
# so that improvement coefficients can vary from one specific
# setup to another.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
$stdframe=16*$SIZE_T+4*8;
# On z990 it was measured to perform 2.6-2.2 times better than
# compiler-generated code, less for longer keys...
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
$stdframe=16*$SIZE_T+4*8;
push(@INC,"${dir}","${dir}../../perlasm");
require "sparcv9_modes.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$code.=<<___;
#include "sparc_arch.h"
# ~100-230% faster than gcc-generated code and ~35-90% faster than
# the pure SPARCv9 code path.
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$locals=16*8;
# module still have hidden potential [see TODO list there], which is
# estimated to be larger than 20%...
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
# int bn_mul_mont(
$rp="%i0"; # BN_ULONG *rp,
# key length, more for longer keys] on USI&II cores and 30-80% - on
# USIII&IV.
-$output = pop;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+
+$output and open STDOUT,">$output";
$fname="bn_mul_mont_fpu";
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# for reference purposes, because T4 has dedicated Montgomery
# multiplication and squaring *instructions* that deliver even more.
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$frame = "STACK_FRAME";
$bias = "STACK_BIAS";
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0],$x86only = $ARGV[$#ARGV] eq "386");
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# these coefficients are not ones for bn_GF2m_mul_2x2 itself, as not
# all CPU time is burnt in it...
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
($lo,$hi)=("%rax","%rdx"); $a=$lo;
#
# Add MULX/ADOX/ADCX code path.
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
# the np argument is not just modulus value, but one interleaved
# with 0. This is to optimize post-condition...
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
$OPENSSL=1;
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
# EM64T, pre-Core2 Intel x86_64 CPU, is not as impressive, because it
# apparently emulates some of 64-bit operations in [32-bit] microcode.
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
sub hi() { my $r=shift; $r =~ s/%[er]([a-d])x/%\1h/; $r; }
push(@INC,"${dir}","${dir}../../perlasm");
require "sparcv9_modes.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$::evp=1; # if $evp is set to 0, script generates module with
# Camellia_[en|de]crypt, Camellia_set_key and Camellia_cbc_encrypt
require "x86asm.pl";
require "cbc.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
# but then Snapdragon S4 and Cortex-A8 results get
# 20-25% worse;
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour $output"
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
sub AUTOLOAD() # thunk [simplified] x86-style perlasm
#
# (*) slower than 4+1:-(
-$flavour=shift;
-$output=shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
sub AUTOLOAD() # thunk [simplified] x86-style perlasm
# dependent on input length. This module on the other hand is free
# from such limitation.
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
($OUT,$INP,$LEN,$KEYB,$COUNTERA)=("A4","B4","A6","B6","A8");
($KEYA,$COUNTERB,$STEP)=("A7","B7","A3");
# pass runs slower than expected... Overall result is 15.6 cpb, two
# cycles more than theoretical estimate.
-$output = pop;
-open STDOUT, ">$output" if $output;
+$output = pop and open STDOUT, ">$output";
my @k = map("r$_",(16..31));
my @x = map("r$_",(38..53));
# instructions, which is why switch to vector-only code pays
# off that much;
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$LOCALS=6*$SIZE_T;
$FRAME=$LOCALS+64+18*$SIZE_T; # 64 is for local variables
use lib "$Bin/../..";
use perlasm::s390x qw(:DEFAULT :VX :LD AUTOLOAD LABEL INCLUDE);
-my $flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
my ($z,$SIZE_T);
if ($flavour =~ /3[12]/) {
$SIZE_T=8;
}
-my $output;
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-
my $sp="%r15";
my $stdframe=16*$SIZE_T+4*8;
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
# (vi) even though Skylake-X can execute AVX512F code and deliver 0.57
# cpb in single thread, the corresponding capability is suppressed;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$avx = ($2>=3.0) + ($2>3.0);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
# input parameter block
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# format.
#
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
push(@INC,"${dir}","${dir}../../perlasm");
require "sparcv9_modes.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
$code.=<<___;
#include "sparc_arch.h"
# on benchmark. Lower coefficients are for ECDSA sign, server-side
# operation. Keep in mind that +200% means 3x improvement.
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$code.=<<___;
# on benchmark. Lower coefficients are for ECDSA sign, server-side
# operation. Keep in mind that +400% means 5x improvement.
-$flavour = shift;
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
{
# S.Gueron and V.Krasnov, "Fast Prime Field Elliptic Curve Cryptography with
# 256 Bit Primes"
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
# POWER7 +260-530%
# POWER8 +220-340%
-$flavour = shift;
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my $sp="r1";
# on benchmark. Lower coefficients are for ECDSA sign, server-side
# operation. Keep in mind that +200% means 3x improvement.
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$code.=<<___;
#include "sparc_arch.h"
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
# higher - for ECDSA sign, relatively fastest server-side operation.
# Keep in mind that +100% means 2x improvement.
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
# this module delivers more than 2x improvement, and when it does,
# from 12% to 30% improvement was measured...
-$flavour = shift;
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my $sp = "r1";
# C implementation, so that comparison is always against
# 2^51 radix;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+
+$output and open STDOUT,">$output";
&asm_init($ARGV[0]);
# single-process result on 8-core processor, or ~11GBps per 2.85GHz
# socket.
-$output=pop;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+
+$output and open STDOUT,">$output";
use integer;
}
no warnings qw(uninitialized);
-my $flavour = shift;
-my $output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
my $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$code .= <<EOF;
# [1] http://rt.openssl.org/Ticket/Display.html?id=2900&user=guest&pass=guest
# [2] http://www.intel.com/content/dam/www/public/us/en/documents/software-support/enabling-high-performance-gcm.pdf
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$avx = ($2>=3.0) + ($2>3.0);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if ($avx>1) {{{
# *native* byte order on current platform. See gcm128.c for working
# example...
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$Xi="r0"; # argument block
# better, because theoretical [though not necessarily achievable]
# estimate for "4-bit" table-driven implementation is ~12 cycles.
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
($Xip,$Htable,$inp,$len)=("A4","B4","A6","B6"); # arguments
#
# Special thanks to polarhome.com for providing HP-UX account.
-$flavour = shift;
-$output = shift;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
# it's actually almost 2 times slower. Which is the reason why
# KIMD-GHASH is not used in gcm_gmult_4bit.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
$softonly=0;
# saturates at ~15.5x single-process result on 8-core processor,
# or ~20.5GBps per 2.85GHz socket.
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
$frame="STACK_FRAME";
$bias="STACK_BIAS";
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$x86only = $ARGV[$#ARGV] eq "386");
#
# [1] http://rt.openssl.org/Ticket/Display.html?id=2900&user=guest&pass=guest
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$avx = ($2>=3.0) + ($2>3.0);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$do4xaggr=1;
# aggregated reduction - by 170% or 2.7x (resulting in 0.55 cpb).
# POWER9 delivers 0.51 cpb.
-$flavour=shift;
-$output =shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T=8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
my ($Xip,$Htbl,$inp,$len)=map("r$_",(3..6)); # argument block
#
# (*) presented for reference/comparison purposes;
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$Xi="x0"; # argument block
# https://www.openssl.org/source/license.html
-$flavour = shift;
-$output = shift;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
# the cost of 15/12% regression on Cortex-A5/A7, it's even possible
# to improve Cortex-A9 result, but then A5/A7 loose more than 20%;
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
($ctx,$inp,$len,$padbit)=map("r$_",(0..3));
# i.e. measured result is worse than expected, presumably binary
# translator is not almighty;
-$flavour=shift;
-$output=shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my ($ctx,$inp,$len,$padbit) = map("x$_",(0..3));
# time dependent on input length. This module on the other hand is free
# from such limitation.
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
($CTXA,$INPB,$LEN,$PADBIT)=("A4","B4","A6","B6");
($H0,$H1,$H2,$H3,$H4,$H4a)=("A8","B8","A10","B10","B2",$LEN);
#
######################################################################
-$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+# supported flavours are o32,n32,64,nubi32,nubi64, default is o32
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : "o32";
die "MIPS64 only" unless ($flavour =~ /64|n32/i);
___
}
-$output=pop and open STDOUT,">$output";
+$output and open STDOUT,">$output";
print $code;
close STDOUT;
# not, not one usable in the context. Improvement is ~40% over -m64
# result above and is ~1.43 on little-endian systems.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$FRAME=24*$SIZE_T;
# POWER7 3.50/+30%
# POWER8 3.75/+10%
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$LOCALS=6*$SIZE_T;
$FRAME=$LOCALS+6*8+18*8;
use lib "$Bin/../..";
use perlasm::s390x qw(:DEFAULT :LD :GE :EI :MI1 :VX AUTOLOAD LABEL INCLUDE);
-my $flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
my ($z,$SIZE_T);
if ($flavour =~ /3[12]/) {
$SIZE_T=8;
}
-my $output;
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-
my $stdframe=16*$SIZE_T+4*8;
my $sp="%r15";
# (***) Multi-process benchmark saturates at ~12.5x single-process
# result on 8-core processor, or ~21GBps per 2.85GHz socket.
-my $output = pop;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+
+open STDOUT,">$output" if $output;
my ($ctx,$inp,$len,$padbit,$shl,$shr) = map("%i$_",(0..5));
my ($r0,$r1,$r2,$r3,$s1,$s2,$s3,$h4) = map("%l$_",(0..7));
my ($h0,$h1,$h2,$h3, $t0,$t1,$t2) = map("%o$_",(0..5,7));
my ($d0,$d1,$d2,$d3) = map("%g$_",(1..4));
-my $output = pop;
-open STDOUT,">$stdout";
-
$code.=<<___;
#include "sparc_arch.h"
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
# (***) strangely enough performance seems to vary from core to core,
# listed result is best case;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$avx = ($2>=3.0) + ($2>3.0);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my ($ctx,$inp,$len,$padbit)=("%rdi","%rsi","%rdx","%rcx");
# https://www.openssl.org/source/license.html
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
( $xlate="${dir}perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
if ($flavour=~/64/) {
$CMPLI="cmpldi";
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0],$x86only = $ARGV[$#ARGV] eq "386");
.align 4
___
-$output=pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
print $code;
close STDOUT;
# to be able to use 'openssl speed rc4' for
# benchmarking the stitched subroutine...
-my $flavour = shift;
-my $output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
my $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my ($dat,$in0,$out,$ctx,$inp,$len, $func,$nargs);
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-$flavour = shift;
-$output = shift;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
# remains z/Architecture specific. On z990 it was measured to perform
# 50% better than code generated by gcc 4.3.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
$rp="%r14";
$sp="%r15";
# but more than likely at the cost of the others (see rc4-586.pl
# to get the idea)...
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$dat="%rdi"; # arg1
require "x86asm.pl";
require "cbc.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
$ra="%r14";
$sp="%r15";
# Cortex-Mx, x>=3. Otherwise, non-NEON results for NEON-capable
# processors are presented mostly for reference purposes.
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
my @C = map("r$_",(0..9));
# Cortex-A57 to 25% on Cortex-A53. While in comparison to older
# compiler this code is at least 2x faster...
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my @rhotates = ([ 0, 1, 62, 28, 27 ],
.asciz "Keccak-1600 absorb and squeeze for AVX2, CRYPTOGAMS by <appro\@openssl.org>"
___
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
print $code;
close STDOUT;
.asciz "Keccak-1600 absorb and squeeze for AVX-512F, CRYPTOGAMS by <appro\@openssl.org>"
___
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
print $code;
close STDOUT;
.asciz "Keccak-1600 absorb and squeeze for AVX512VL, CRYPTOGAMS by <appro\@openssl.org>"
___
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
print $code;
close STDOUT;
.align 4
___
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
print $code;
close STDOUT;
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
# much better (but watch out for them generating code specific
# to processor they execute on).
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$FRAME=24*$SIZE_T+6*$SIZE_T+32;
$LOCALS=6*$SIZE_T;
# amount of instruction and assumed instruction issue rate. It's ~2.5x
# faster than compiler-generated code.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
my @A = map([ 8*$_, 8*($_+1), 8*($_+2), 8*($_+3), 8*($_+4) ], (0,5,10,15,20));
# improved by 14% by replacing rotates with double-precision
# shift with same register as source and destination.
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
my @A = map([ 8*$_-100, 8*($_+1)-100, 8*($_+2)-100,
# successor can achieve higher scalar instruction issue rate, then
# this module will loose... And it does on POWER9 with 12.0 vs. 9.4.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$FRAME=6*$SIZE_T+13*16; # 13*16 is for v20-v31 offload
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
#
# Add ARMv8 code path performing at 2.35 cpb on Apple A7.
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$ctx="r0";
# (**) Keep in mind that Denver relies on binary translation, which
# optimizes compiler output at run-time.
-$flavour = shift;
-$output = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
-open OUT,"| \"$^X\" $xlate $flavour $output";
+open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $1";
*STDOUT=*OUT;
($ctx,$inp,$num)=("x0","x1","x2");
# service routines are expected to preserve it and for own well-being
# zero it upon entry.
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
($CTX,$INP,$NUM) = ("A4","B4","A6"); # arguments
# Performance under big-endian OS such as HP-UX is 179MBps*1GHz, which
# is >50% better than HP C and >2x better than gcc.
-$output = pop;
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
$code=<<___;
.ident \"sha1-ia64.s, version 1.3\"
# in real-life application are somewhat lower, e.g. for 2KB
# fragments they range from 30% to 100% (on Haswell);
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$avx = ($2>=3.0) + ($2>3.0);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
# void sha1_multi_block (
# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
-#
-$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+# supported flavours are o32,n32,64,nubi32,nubi64, default is o32
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : "o32";
if ($flavour =~ /64|n32/i) {
$PTR_ADD="daddu"; # incidentally works even on n32
$big_endian=(`echo MIPSEB | $ENV{CC} -E -`=~/MIPSEB/)?0:1 if ($ENV{CC});
-for (@ARGV) { $output=$_ if (/\w[\w\-]*\.\w+$/); }
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
if (!defined($big_endian))
{ $big_endian=(unpack('L',pack('N',1))==1); }
#
# Special thanks to polarhome.com for providing HP-UX account.
-$flavour = shift;
-$output = shift;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
# PPC970,gcc-4.0.0 +76% +59%
# Power6,xlc-7 +68% +33%
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T =8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
$FRAME=24*$SIZE_T+64;
$LOCALS=6*$SIZE_T;
$kimdfunc=1; # magic function code for kimd instruction
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$g="g";
}
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output and open STDOUT,">$output";
$K_00_39="%r0"; $K=$K_00_39;
$K_40_79="%r1";
# single-process result on 8-core processor, or ~9GBps per 2.85GHz
# socket.
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
@X=("%o0","%o1","%o2","%o3","%o4","%o5","%g1","%o7");
$rot1m="%g2";
if ($bits==64) { $bias=2047; $frame=192; }
else { $bias=0; $frame=112; }
-$output=shift;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
$ctx="%i0";
$inp="%i1";
# by over 40%, while code increases by only 10% or 32 bytes. But once
# again, the goal was to establish _size_ benchmark, not performance.
-$output=shift;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
$inline=0;
#$cheat_on_binutils=1;
# because SSSE3 code is compiled unconditionally;
# (**) SHAEXT result
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$shaext=1; ### set to zero if compiling for 1.0.1
$avx=1 if (!$shaext && $avx);
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$ctx="%rdi"; # 1st arg
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
#
# Add ARMv8 code path performing at 2.0 cpb on Apple A7.
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$ctx="r0"; $t0="r0";
# service routines are expected to preserve it and for own well-being
# zero it upon entry.
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
($CTXA,$INP,$NUM) = ("A4","B4","A6"); # arguments
$K256="A3";
# in real-life application are somewhat lower, e.g. for 2KB
# fragments they range from 75% to 130% (on Haswell);
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$avx = ($2>=3.0) + ($2>3.0);
}
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
# void sha256_multi_block (
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0],$ARGV[$#ARGV] eq "386");
$lo="LO";
# ====================================================================
-$flavour = shift;
-if ($flavour=~/\w[\w\-]*\.\w+$/) { $output=$flavour; undef $flavour; }
-else { while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {} }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open STDOUT,"| \"$^X\" $xlate $flavour $output";
+ open STDOUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
$ctx="r0"; # parameter block
# deliver much less improvement, likely *negative* on Cortex-A5x.
# Which is why NEON support is limited to SHA256.]
-$output=pop;
-$flavour=pop;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour && $flavour ne "void") {
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
die "can't locate arm-xlate.pl";
- open OUT,"| \"$^X\" $xlate $flavour $output";
+ open OUT,"| \"$^X\" $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
} else {
- open STDOUT,">$output";
+ $output and open STDOUT,">$output";
}
if ($output =~ /512/) {
# service routines are expected to preserve it and for own well-being
# zero it upon entry.
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
-open STDOUT,">$output";
+($output = pop) =~ m|\.\w+$| and open STDOUT,">$output";
($CTXA,$INP,$NUM) = ("A4","B4","A6"); # arguments
$K512="A3";
# To generate code, pass the file name with either 256 or 512 in its
# name and compiler flags.
-$output=pop;
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
if ($output =~ /512.*\.[s|asm]/) {
$SZ=8;
$rounds=64;
} else { die "nonsense $output"; }
-open STDOUT,">$output" || die "can't open $output: $!";
+$output and (open STDOUT,">$output" or die "can't open $output: $!");
if ($^O eq "hpux") {
$ADDP="addp4";
# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
#
-$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+# if $output doesn't have an extension, it's not an output file
+# so use it for $flavour.
+
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+# supported flavours are o32,n32,64,nubi32,nubi64, default is o32
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : "o32";
if ($flavour =~ /64|n32/i) {
$PTR_LA="dla";
$big_endian=(`echo MIPSEB | $ENV{CC} -E -`=~/MIPSEB/)?0:1 if ($ENV{CC});
-for (@ARGV) { $output=$_ if (/\w[\w\-]*\.\w+$/); }
open STDOUT,">$output";
if (!defined($big_endian)) { $big_endian=(unpack('L',pack('N',1))==1); }
#
# Special thanks to polarhome.com for providing HP-UX account.
-$flavour = shift;
-$output = shift;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
if ($flavour =~ /64/) {
$LEVEL ="2.0W";
# block signals prior calling this routine. For the record, in 32-bit
# context R2 serves as TLS pointer, while in 64-bit context - R13.
-$flavour=shift;
-$output =shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T=8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
if ($output =~ /512/) {
$func="sha512_block_ppc";
# remains z/Architecture specific. On z990 SHA256 was measured to
# perform 2.4x and SHA512 - 13x better than code generated by gcc 4.3.
-$flavour = shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /3[12]/) {
$SIZE_T=4;
$T1="%r14";
$sp="%r15";
-while (($output=shift) && ($output!~/\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
if ($output =~ /512/) {
# saturates at 11.5x single-process result on 8-core processor, or
# ~11/16GBps per 2.85GHz socket.
-$output=pop;
-open STDOUT,">$output";
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+
+$output and open STDOUT,">$output";
if ($output =~ /512/) {
$label="512";
# below certain limit makes no difference/sense; to conserve
# space SHA256 XOP code path is therefore omitted;
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$shaext=1; ### set to zero if compiling for 1.0.1
$avx=1 if (!$shaext && $avx);
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
if ($output =~ /512/) {
# SHA256 9.7 [15.8] 11.2 [12.5]
# SHA512 6.1 [10.3] 7.0 [7.9]
-$flavour=shift;
-$output =shift;
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
if ($flavour =~ /64/) {
$SIZE_T=8;
( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
die "can't locate ppc-xlate.pl";
-open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
+open STDOUT,"| $^X $xlate $flavour \"$output\""
+ or die "can't call $xlate: $!";
if ($output =~ /512/) {
$bits=512;
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# 3 on Opteron] and which is *unacceptably* slow with 64-bit
# operand.
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
sub L() { $code.=".byte ".join(',',@_)."\n"; }
# https://www.openssl.org/source/license.html
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
($arg1,$arg2,$arg3,$arg4)=$win64?("%rcx","%rdx","%r8", "%r9") : # Win64 order
push(@INC, "${dir}perlasm", "perlasm");
require "x86asm.pl";
-$output = pop;
-open OUT,">$output";
-*STDOUT=*OUT;
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
push(@INC,"${dir}","${dir}../../crypto/perlasm");
require "x86asm.pl";
-$output=pop;
-open STDOUT,">$output";
+$output=pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# Assembler helpers for Padlock engine. See even e_padlock-x86.pl for
# details.
-$flavour = shift;
-$output = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+$flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
( $xlate="${dir}../../crypto/perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
-open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\"";
+open OUT,"| \"$^X\" \"$xlate\" $flavour \"$output\""
+ or die "can't call $xlate: $!";
*STDOUT=*OUT;
$code=".text\n";
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
push(@INC,"${dir}.");
require "uplink-common.pl";
-$output = pop;
-open STDOUT,">$output";
+$output = pop and open STDOUT,">$output";
&asm_init($ARGV[0]);
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
-$output=pop;
+# $output is the last argument if it looks like a file (it has an extension)
+$output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-open OUT,"| \"$^X\" \"${dir}../crypto/perlasm/x86_64-xlate.pl\" \"$output\"";
+open OUT,"| \"$^X\" \"${dir}../crypto/perlasm/x86_64-xlate.pl\" \"$output\""
+ or die "can't call ${dir}../crypto/perlasm/x86_64-xlate.pl: $!";
*STDOUT=*OUT;
push(@INC,"${dir}.");
projects / thirdparty / openssl.git / commitdiff
