#
# ChaCha20 for ARMv8.
#
+# April 2019
+#
+# Replace 3xNEON+1xIALU code path with 4+1. 4+1 is actually fastest
+# option on most(*), but not all, processors, yet 6+2 is retained.
+# This is because penalties are considered tolerable in comparison to
+# improvement on processors where 6+2 helps. Most notably +37% on
+# ThunderX2. It's server-oriented processor which will have to serve
+# as many requests as possible. While others are mostly clients, when
+# performance doesn't have to be absolute top-notch, just fast enough,
+# as majority of time is spent "entertaining" relatively slow human.
+#
# Performance in cycles per byte out of large buffer.
#
-# IALU/gcc-4.9 3xNEON+1xIALU 6xNEON+2xIALU
+# IALU/gcc-4.9 4xNEON+1xIALU 6xNEON+2xIALU
#
-# Apple A7 5.50/+49% 3.33 1.70
-# Cortex-A53 8.40/+80% 4.72 4.72(*)
-# Cortex-A57 8.06/+43% 4.90 4.43(**)
-# Denver 4.50/+82% 2.63 2.67(*)
-# X-Gene 9.50/+46% 8.82 8.89(*)
-# Mongoose 8.00/+44% 3.64 3.25
-# Kryo 8.17/+50% 4.83 4.65
-# ThunderX2 7.26/+48% 7.91 4.30
+# Apple A7 5.50/+49% 2.72 1.60
+# Cortex-A53 8.40/+80% 4.06 4.45(*)
+# Cortex-A57 8.06/+43% 4.15 4.40(*)
+# Denver 4.50/+82% 2.30 2.70(*)
+# X-Gene 9.50/+46% 8.20 8.90(*)
+# Mongoose 8.00/+44% 2.74 3.12(*)
+# Kryo 8.17/+50% 4.47 4.65(*)
+# ThunderX2 7.22/+48% 5.64 4.10
#
-# (*) it's expected that doubling interleave factor doesn't help
-# all processors, only those with higher NEON latency and
-# higher instruction issue rate;
-# (**) expected improvement was actually higher;
+# (*) slower than 4+1:-(
$flavour=shift;
$output=shift;
}
$code.=<<___;
-#include "arm_arch.h"
+#ifndef __KERNEL__
+# include "arm_arch.h"
+.extern OPENSSL_armcap_P
+#endif
.text
-.extern OPENSSL_armcap_P
-
.align 5
.Lsigma:
.quad 0x3320646e61707865,0x6b20657479622d32 // endian-neutral
.Lone:
-.long 1,0,0,0
-.asciz "ChaCha20 for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+.long 1,2,3,4
+.Lrot24:
+.long 0x02010003,0x06050407,0x0a09080b,0x0e0d0c0f
+.asciz "ChaCha20 for ARMv8, CRYPTOGAMS by \@dot-asm"
.globl ChaCha20_ctr32
.type ChaCha20_ctr32,%function
cmp $len,#192
b.lo .Lshort
+#ifndef __KERNEL__
adrp x17,OPENSSL_armcap_P
ldr w17,[x17,#:lo12:OPENSSL_armcap_P]
tst w17,#ARMV7_NEON
b.ne .LChaCha20_neon
+#endif
.Lshort:
.inst 0xd503233f // paciasp
ldp @d[2],@d[3],[$key] // load key
ldp @d[4],@d[5],[$key,#16]
ldp @d[6],@d[7],[$ctr] // load counter
-#ifdef __ARMEB__
+#ifdef __AARCH64EB__
ror @d[2],@d[2],#32
ror @d[3],@d[3],#32
ror @d[4],@d[4],#32
add @x[14],@x[14],@x[15],lsl#32
ldp @x[13],@x[15],[$inp,#48]
add $inp,$inp,#64
-#ifdef __ARMEB__
+#ifdef __AARCH64EB__
rev @x[0],@x[0]
rev @x[2],@x[2]
rev @x[4],@x[4]
add @x[10],@x[10],@x[11],lsl#32
add @x[12],@x[12],@x[13],lsl#32
add @x[14],@x[14],@x[15],lsl#32
-#ifdef __ARMEB__
+#ifdef __AARCH64EB__
rev @x[0],@x[0]
rev @x[2],@x[2]
rev @x[4],@x[4]
___
{{{
-my ($A0,$B0,$C0,$D0,$A1,$B1,$C1,$D1,$A2,$B2,$C2,$D2,$T0,$T1,$T2,$T3) =
- map("v$_.4s",(0..7,16..23));
-my (@K)=map("v$_.4s",(24..30));
-my $ONE="v31.4s";
+my @K = map("v$_.4s",(0..3));
+my ($xt0,$xt1,$xt2,$xt3, $CTR,$ROT24) = map("v$_.4s",(4..9));
+my @X = map("v$_.4s",(16,20,24,28, 17,21,25,29, 18,22,26,30, 19,23,27,31));
+my ($xa0,$xa1,$xa2,$xa3, $xb0,$xb1,$xb2,$xb3,
+ $xc0,$xc1,$xc2,$xc3, $xd0,$xd1,$xd2,$xd3) = @X;
-sub NEONROUND {
-my $odd = pop;
-my ($a,$b,$c,$d,$t)=@_;
+sub NEON_lane_ROUND {
+my ($a0,$b0,$c0,$d0)=@_;
+my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
+my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
+my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
+my @x=map("'$_'",@X);
(
- "&add ('$a','$a','$b')",
- "&eor ('$d','$d','$a')",
- "&rev32_16 ('$d','$d')", # vrot ($d,16)
-
- "&add ('$c','$c','$d')",
- "&eor ('$t','$b','$c')",
- "&ushr ('$b','$t',20)",
- "&sli ('$b','$t',12)",
-
- "&add ('$a','$a','$b')",
- "&eor ('$t','$d','$a')",
- "&ushr ('$d','$t',24)",
- "&sli ('$d','$t',8)",
-
- "&add ('$c','$c','$d')",
- "&eor ('$t','$b','$c')",
- "&ushr ('$b','$t',25)",
- "&sli ('$b','$t',7)",
-
- "&ext ('$c','$c','$c',8)",
- "&ext ('$d','$d','$d',$odd?4:12)",
- "&ext ('$b','$b','$b',$odd?12:4)"
+ "&add (@x[$a0],@x[$a0],@x[$b0])", # Q1
+ "&add (@x[$a1],@x[$a1],@x[$b1])", # Q2
+ "&add (@x[$a2],@x[$a2],@x[$b2])", # Q3
+ "&add (@x[$a3],@x[$a3],@x[$b3])", # Q4
+ "&eor (@x[$d0],@x[$d0],@x[$a0])",
+ "&eor (@x[$d1],@x[$d1],@x[$a1])",
+ "&eor (@x[$d2],@x[$d2],@x[$a2])",
+ "&eor (@x[$d3],@x[$d3],@x[$a3])",
+ "&rev32_16 (@x[$d0],@x[$d0])",
+ "&rev32_16 (@x[$d1],@x[$d1])",
+ "&rev32_16 (@x[$d2],@x[$d2])",
+ "&rev32_16 (@x[$d3],@x[$d3])",
+
+ "&add (@x[$c0],@x[$c0],@x[$d0])",
+ "&add (@x[$c1],@x[$c1],@x[$d1])",
+ "&add (@x[$c2],@x[$c2],@x[$d2])",
+ "&add (@x[$c3],@x[$c3],@x[$d3])",
+ "&eor ('$xt0',@x[$b0],@x[$c0])",
+ "&eor ('$xt1',@x[$b1],@x[$c1])",
+ "&eor ('$xt2',@x[$b2],@x[$c2])",
+ "&eor ('$xt3',@x[$b3],@x[$c3])",
+ "&ushr (@x[$b0],'$xt0',20)",
+ "&ushr (@x[$b1],'$xt1',20)",
+ "&ushr (@x[$b2],'$xt2',20)",
+ "&ushr (@x[$b3],'$xt3',20)",
+ "&sli (@x[$b0],'$xt0',12)",
+ "&sli (@x[$b1],'$xt1',12)",
+ "&sli (@x[$b2],'$xt2',12)",
+ "&sli (@x[$b3],'$xt3',12)",
+
+ "&add (@x[$a0],@x[$a0],@x[$b0])",
+ "&add (@x[$a1],@x[$a1],@x[$b1])",
+ "&add (@x[$a2],@x[$a2],@x[$b2])",
+ "&add (@x[$a3],@x[$a3],@x[$b3])",
+ "&eor ('$xt0',@x[$d0],@x[$a0])",
+ "&eor ('$xt1',@x[$d1],@x[$a1])",
+ "&eor ('$xt2',@x[$d2],@x[$a2])",
+ "&eor ('$xt3',@x[$d3],@x[$a3])",
+ "&tbl (@x[$d0],'{$xt0}','$ROT24')",
+ "&tbl (@x[$d1],'{$xt1}','$ROT24')",
+ "&tbl (@x[$d2],'{$xt2}','$ROT24')",
+ "&tbl (@x[$d3],'{$xt3}','$ROT24')",
+
+ "&add (@x[$c0],@x[$c0],@x[$d0])",
+ "&add (@x[$c1],@x[$c1],@x[$d1])",
+ "&add (@x[$c2],@x[$c2],@x[$d2])",
+ "&add (@x[$c3],@x[$c3],@x[$d3])",
+ "&eor ('$xt0',@x[$b0],@x[$c0])",
+ "&eor ('$xt1',@x[$b1],@x[$c1])",
+ "&eor ('$xt2',@x[$b2],@x[$c2])",
+ "&eor ('$xt3',@x[$b3],@x[$c3])",
+ "&ushr (@x[$b0],'$xt0',25)",
+ "&ushr (@x[$b1],'$xt1',25)",
+ "&ushr (@x[$b2],'$xt2',25)",
+ "&ushr (@x[$b3],'$xt3',25)",
+ "&sli (@x[$b0],'$xt0',7)",
+ "&sli (@x[$b1],'$xt1',7)",
+ "&sli (@x[$b2],'$xt2',7)",
+ "&sli (@x[$b3],'$xt3',7)"
);
}
$code.=<<___;
+#ifdef __KERNEL__
+.globl ChaCha20_neon
+#endif
.type ChaCha20_neon,%function
.align 5
ChaCha20_neon:
ld1 {@K[1],@K[2]},[$key]
ldp @d[6],@d[7],[$ctr] // load counter
ld1 {@K[3]},[$ctr]
- ld1 {$ONE},[@x[0]]
-#ifdef __ARMEB__
+ stp d8,d9,[sp] // meet ABI requirements
+ ld1 {$CTR,$ROT24},[@x[0]]
+#ifdef __AARCH64EB__
rev64 @K[0],@K[0]
ror @d[2],@d[2],#32
ror @d[3],@d[3],#32
ror @d[6],@d[6],#32
ror @d[7],@d[7],#32
#endif
- add @K[3],@K[3],$ONE // += 1
- add @K[4],@K[3],$ONE
- add @K[5],@K[4],$ONE
- shl $ONE,$ONE,#2 // 1 -> 4
.Loop_outer_neon:
- mov.32 @x[0],@d[0] // unpack key block
- lsr @x[1],@d[0],#32
- mov $A0,@K[0]
- mov.32 @x[2],@d[1]
- lsr @x[3],@d[1],#32
- mov $A1,@K[0]
- mov.32 @x[4],@d[2]
- lsr @x[5],@d[2],#32
- mov $A2,@K[0]
- mov.32 @x[6],@d[3]
- mov $B0,@K[1]
- lsr @x[7],@d[3],#32
- mov $B1,@K[1]
- mov.32 @x[8],@d[4]
- mov $B2,@K[1]
- lsr @x[9],@d[4],#32
- mov $D0,@K[3]
- mov.32 @x[10],@d[5]
- mov $D1,@K[4]
- lsr @x[11],@d[5],#32
- mov $D2,@K[5]
- mov.32 @x[12],@d[6]
- mov $C0,@K[2]
- lsr @x[13],@d[6],#32
- mov $C1,@K[2]
- mov.32 @x[14],@d[7]
- mov $C2,@K[2]
- lsr @x[15],@d[7],#32
+ dup $xa0,@{K[0]}[0] // unpack key block
+ mov.32 @x[0],@d[0]
+ dup $xa1,@{K[0]}[1]
+ lsr @x[1],@d[0],#32
+ dup $xa2,@{K[0]}[2]
+ mov.32 @x[2],@d[1]
+ dup $xa3,@{K[0]}[3]
+ lsr @x[3],@d[1],#32
+ dup $xb0,@{K[1]}[0]
+ mov.32 @x[4],@d[2]
+ dup $xb1,@{K[1]}[1]
+ lsr @x[5],@d[2],#32
+ dup $xb2,@{K[1]}[2]
+ mov.32 @x[6],@d[3]
+ dup $xb3,@{K[1]}[3]
+ lsr @x[7],@d[3],#32
+ dup $xd0,@{K[3]}[0]
+ mov.32 @x[8],@d[4]
+ dup $xd1,@{K[3]}[1]
+ lsr @x[9],@d[4],#32
+ dup $xd2,@{K[3]}[2]
+ mov.32 @x[10],@d[5]
+ dup $xd3,@{K[3]}[3]
+ lsr @x[11],@d[5],#32
+ add $xd0,$xd0,$CTR
+ mov.32 @x[12],@d[6]
+ dup $xc0,@{K[2]}[0]
+ lsr @x[13],@d[6],#32
+ dup $xc1,@{K[2]}[1]
+ mov.32 @x[14],@d[7]
+ dup $xc2,@{K[2]}[2]
+ lsr @x[15],@d[7],#32
+ dup $xc3,@{K[2]}[3]
mov $ctr,#10
- subs $len,$len,#256
+ subs $len,$len,#320
.Loop_neon:
sub $ctr,$ctr,#1
___
- my @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,0);
- my @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,0);
- my @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,0);
- my @thread3=&ROUND(0,4,8,12);
-
- foreach (@thread0) {
- eval; eval(shift(@thread3));
- eval(shift(@thread1)); eval(shift(@thread3));
- eval(shift(@thread2)); eval(shift(@thread3));
- }
+ my @plus_one=&ROUND(0,4,8,12);
+ foreach (&NEON_lane_ROUND(0,4,8,12)) { eval; eval(shift(@plus_one)); }
- @thread0=&NEONROUND($A0,$B0,$C0,$D0,$T0,1);
- @thread1=&NEONROUND($A1,$B1,$C1,$D1,$T1,1);
- @thread2=&NEONROUND($A2,$B2,$C2,$D2,$T2,1);
- @thread3=&ROUND(0,5,10,15);
-
- foreach (@thread0) {
- eval; eval(shift(@thread3));
- eval(shift(@thread1)); eval(shift(@thread3));
- eval(shift(@thread2)); eval(shift(@thread3));
- }
+ @plus_one=&ROUND(0,5,10,15);
+ foreach (&NEON_lane_ROUND(0,5,10,15)) { eval; eval(shift(@plus_one)); }
$code.=<<___;
cbnz $ctr,.Loop_neon
- add.32 @x[0],@x[0],@d[0] // accumulate key block
- add $A0,$A0,@K[0]
- add @x[1],@x[1],@d[0],lsr#32
- add $A1,$A1,@K[0]
- add.32 @x[2],@x[2],@d[1]
- add $A2,$A2,@K[0]
- add @x[3],@x[3],@d[1],lsr#32
- add $C0,$C0,@K[2]
- add.32 @x[4],@x[4],@d[2]
- add $C1,$C1,@K[2]
- add @x[5],@x[5],@d[2],lsr#32
- add $C2,$C2,@K[2]
- add.32 @x[6],@x[6],@d[3]
- add $D0,$D0,@K[3]
- add @x[7],@x[7],@d[3],lsr#32
- add.32 @x[8],@x[8],@d[4]
- add $D1,$D1,@K[4]
- add @x[9],@x[9],@d[4],lsr#32
- add.32 @x[10],@x[10],@d[5]
- add $D2,$D2,@K[5]
- add @x[11],@x[11],@d[5],lsr#32
- add.32 @x[12],@x[12],@d[6]
- add $B0,$B0,@K[1]
- add @x[13],@x[13],@d[6],lsr#32
- add.32 @x[14],@x[14],@d[7]
- add $B1,$B1,@K[1]
- add @x[15],@x[15],@d[7],lsr#32
- add $B2,$B2,@K[1]
+ add $xd0,$xd0,$CTR
+
+ zip1 $xt0,$xa0,$xa1 // transpose data
+ zip1 $xt1,$xa2,$xa3
+ zip2 $xt2,$xa0,$xa1
+ zip2 $xt3,$xa2,$xa3
+ zip1.64 $xa0,$xt0,$xt1
+ zip2.64 $xa1,$xt0,$xt1
+ zip1.64 $xa2,$xt2,$xt3
+ zip2.64 $xa3,$xt2,$xt3
+
+ zip1 $xt0,$xb0,$xb1
+ zip1 $xt1,$xb2,$xb3
+ zip2 $xt2,$xb0,$xb1
+ zip2 $xt3,$xb2,$xb3
+ zip1.64 $xb0,$xt0,$xt1
+ zip2.64 $xb1,$xt0,$xt1
+ zip1.64 $xb2,$xt2,$xt3
+ zip2.64 $xb3,$xt2,$xt3
+
+ zip1 $xt0,$xc0,$xc1
+ add.32 @x[0],@x[0],@d[0] // accumulate key block
+ zip1 $xt1,$xc2,$xc3
+ add @x[1],@x[1],@d[0],lsr#32
+ zip2 $xt2,$xc0,$xc1
+ add.32 @x[2],@x[2],@d[1]
+ zip2 $xt3,$xc2,$xc3
+ add @x[3],@x[3],@d[1],lsr#32
+ zip1.64 $xc0,$xt0,$xt1
+ add.32 @x[4],@x[4],@d[2]
+ zip2.64 $xc1,$xt0,$xt1
+ add @x[5],@x[5],@d[2],lsr#32
+ zip1.64 $xc2,$xt2,$xt3
+ add.32 @x[6],@x[6],@d[3]
+ zip2.64 $xc3,$xt2,$xt3
+ add @x[7],@x[7],@d[3],lsr#32
+
+ zip1 $xt0,$xd0,$xd1
+ add.32 @x[8],@x[8],@d[4]
+ zip1 $xt1,$xd2,$xd3
+ add @x[9],@x[9],@d[4],lsr#32
+ zip2 $xt2,$xd0,$xd1
+ add.32 @x[10],@x[10],@d[5]
+ zip2 $xt3,$xd2,$xd3
+ add @x[11],@x[11],@d[5],lsr#32
+ zip1.64 $xd0,$xt0,$xt1
+ add.32 @x[12],@x[12],@d[6]
+ zip2.64 $xd1,$xt0,$xt1
+ add @x[13],@x[13],@d[6],lsr#32
+ zip1.64 $xd2,$xt2,$xt3
+ add.32 @x[14],@x[14],@d[7]
+ zip2.64 $xd3,$xt2,$xt3
+ add @x[15],@x[15],@d[7],lsr#32
b.lo .Ltail_neon
add @x[0],@x[0],@x[1],lsl#32 // pack
add @x[2],@x[2],@x[3],lsl#32
ldp @x[1],@x[3],[$inp,#0] // load input
+ add $xa0,$xa0,@K[0] // accumulate key block
add @x[4],@x[4],@x[5],lsl#32
add @x[6],@x[6],@x[7],lsl#32
ldp @x[5],@x[7],[$inp,#16]
+ add $xb0,$xb0,@K[1]
add @x[8],@x[8],@x[9],lsl#32
add @x[10],@x[10],@x[11],lsl#32
ldp @x[9],@x[11],[$inp,#32]
+ add $xc0,$xc0,@K[2]
add @x[12],@x[12],@x[13],lsl#32
add @x[14],@x[14],@x[15],lsl#32
ldp @x[13],@x[15],[$inp,#48]
+ add $xd0,$xd0,@K[3]
add $inp,$inp,#64
-#ifdef __ARMEB__
+#ifdef __AARCH64EB__
rev @x[0],@x[0]
rev @x[2],@x[2]
rev @x[4],@x[4]
rev @x[12],@x[12]
rev @x[14],@x[14]
#endif
- ld1.8 {$T0-$T3},[$inp],#64
+ ld1.8 {$xt0-$xt3},[$inp],#64
eor @x[0],@x[0],@x[1]
+ add $xa1,$xa1,@K[0]
eor @x[2],@x[2],@x[3]
+ add $xb1,$xb1,@K[1]
eor @x[4],@x[4],@x[5]
+ add $xc1,$xc1,@K[2]
eor @x[6],@x[6],@x[7]
+ add $xd1,$xd1,@K[3]
eor @x[8],@x[8],@x[9]
- eor $A0,$A0,$T0
+ eor $xa0,$xa0,$xt0
+ movi $xt0,#5
eor @x[10],@x[10],@x[11]
- eor $B0,$B0,$T1
+ eor $xb0,$xb0,$xt1
eor @x[12],@x[12],@x[13]
- eor $C0,$C0,$T2
+ eor $xc0,$xc0,$xt2
eor @x[14],@x[14],@x[15]
- eor $D0,$D0,$T3
- ld1.8 {$T0-$T3},[$inp],#64
+ eor $xd0,$xd0,$xt3
+ add $CTR,$CTR,$xt0 // += 5
+ ld1.8 {$xt0-$xt3},[$inp],#64
stp @x[0],@x[2],[$out,#0] // store output
- add @d[6],@d[6],#4 // increment counter
+ add @d[6],@d[6],#5 // increment counter
stp @x[4],@x[6],[$out,#16]
- add @K[3],@K[3],$ONE // += 4
stp @x[8],@x[10],[$out,#32]
- add @K[4],@K[4],$ONE
stp @x[12],@x[14],[$out,#48]
- add @K[5],@K[5],$ONE
add $out,$out,#64
- st1.8 {$A0-$D0},[$out],#64
- ld1.8 {$A0-$D0},[$inp],#64
-
- eor $A1,$A1,$T0
- eor $B1,$B1,$T1
- eor $C1,$C1,$T2
- eor $D1,$D1,$T3
- st1.8 {$A1-$D1},[$out],#64
-
- eor $A2,$A2,$A0
- eor $B2,$B2,$B0
- eor $C2,$C2,$C0
- eor $D2,$D2,$D0
- st1.8 {$A2-$D2},[$out],#64
+ st1.8 {$xa0-$xd0},[$out],#64
+ add $xa2,$xa2,@K[0]
+ add $xb2,$xb2,@K[1]
+ add $xc2,$xc2,@K[2]
+ add $xd2,$xd2,@K[3]
+ ld1.8 {$xa0-$xd0},[$inp],#64
+
+ eor $xa1,$xa1,$xt0
+ eor $xb1,$xb1,$xt1
+ eor $xc1,$xc1,$xt2
+ eor $xd1,$xd1,$xt3
+ st1.8 {$xa1-$xd1},[$out],#64
+ add $xa3,$xa3,@K[0]
+ add $xb3,$xb3,@K[1]
+ add $xc3,$xc3,@K[2]
+ add $xd3,$xd3,@K[3]
+ ld1.8 {$xa1-$xd1},[$inp],#64
+
+ eor $xa2,$xa2,$xa0
+ eor $xb2,$xb2,$xb0
+ eor $xc2,$xc2,$xc0
+ eor $xd2,$xd2,$xd0
+ st1.8 {$xa2-$xd2},[$out],#64
+
+ eor $xa3,$xa3,$xa1
+ eor $xb3,$xb3,$xb1
+ eor $xc3,$xc3,$xc1
+ eor $xd3,$xd3,$xd1
+ st1.8 {$xa3-$xd3},[$out],#64
b.hi .Loop_outer_neon
+ ldp d8,d9,[sp] // meet ABI requirements
+
ldp x19,x20,[x29,#16]
add sp,sp,#64
ldp x21,x22,[x29,#32]
.inst 0xd50323bf // autiasp
ret
+.align 4
.Ltail_neon:
- add $len,$len,#256
+ add $len,$len,#320
+ ldp d8,d9,[sp] // meet ABI requirements
cmp $len,#64
b.lo .Less_than_64
add @x[14],@x[14],@x[15],lsl#32
ldp @x[13],@x[15],[$inp,#48]
add $inp,$inp,#64
-#ifdef __ARMEB__
+#ifdef __AARCH64EB__
rev @x[0],@x[0]
rev @x[2],@x[2]
rev @x[4],@x[4]
eor @x[14],@x[14],@x[15]
stp @x[0],@x[2],[$out,#0] // store output
- add @d[6],@d[6],#4 // increment counter
+ add $xa0,$xa0,@K[0] // accumulate key block
stp @x[4],@x[6],[$out,#16]
+ add $xb0,$xb0,@K[1]
stp @x[8],@x[10],[$out,#32]
+ add $xc0,$xc0,@K[2]
stp @x[12],@x[14],[$out,#48]
+ add $xd0,$xd0,@K[3]
add $out,$out,#64
b.eq .Ldone_neon
sub $len,$len,#64
cmp $len,#64
- b.lo .Less_than_128
-
- ld1.8 {$T0-$T3},[$inp],#64
- eor $A0,$A0,$T0
- eor $B0,$B0,$T1
- eor $C0,$C0,$T2
- eor $D0,$D0,$T3
- st1.8 {$A0-$D0},[$out],#64
+ b.lo .Last_neon
+
+ ld1.8 {$xt0-$xt3},[$inp],#64
+ eor $xa0,$xa0,$xt0
+ eor $xb0,$xb0,$xt1
+ eor $xc0,$xc0,$xt2
+ eor $xd0,$xd0,$xt3
+ st1.8 {$xa0-$xd0},[$out],#64
b.eq .Ldone_neon
+
+ add $xa0,$xa1,@K[0]
+ add $xb0,$xb1,@K[1]
sub $len,$len,#64
+ add $xc0,$xc1,@K[2]
cmp $len,#64
- b.lo .Less_than_192
-
- ld1.8 {$T0-$T3},[$inp],#64
- eor $A1,$A1,$T0
- eor $B1,$B1,$T1
- eor $C1,$C1,$T2
- eor $D1,$D1,$T3
- st1.8 {$A1-$D1},[$out],#64
+ add $xd0,$xd1,@K[3]
+ b.lo .Last_neon
+
+ ld1.8 {$xt0-$xt3},[$inp],#64
+ eor $xa1,$xa0,$xt0
+ eor $xb1,$xb0,$xt1
+ eor $xc1,$xc0,$xt2
+ eor $xd1,$xd0,$xt3
+ st1.8 {$xa1-$xd1},[$out],#64
b.eq .Ldone_neon
- sub $len,$len,#64
- st1.8 {$A2-$D2},[sp]
- b .Last_neon
+ add $xa0,$xa2,@K[0]
+ add $xb0,$xb2,@K[1]
+ sub $len,$len,#64
+ add $xc0,$xc2,@K[2]
+ cmp $len,#64
+ add $xd0,$xd2,@K[3]
+ b.lo .Last_neon
+
+ ld1.8 {$xt0-$xt3},[$inp],#64
+ eor $xa2,$xa0,$xt0
+ eor $xb2,$xb0,$xt1
+ eor $xc2,$xc0,$xt2
+ eor $xd2,$xd0,$xt3
+ st1.8 {$xa2-$xd2},[$out],#64
+ b.eq .Ldone_neon
-.Less_than_128:
- st1.8 {$A0-$D0},[sp]
- b .Last_neon
-.Less_than_192:
- st1.8 {$A1-$D1},[sp]
- b .Last_neon
+ add $xa0,$xa3,@K[0]
+ add $xb0,$xb3,@K[1]
+ add $xc0,$xc3,@K[2]
+ add $xd0,$xd3,@K[3]
+ sub $len,$len,#64
-.align 4
.Last_neon:
+ st1.8 {$xa0-$xd0},[sp]
+
sub $out,$out,#1
add $inp,$inp,$len
add $out,$out,$len
.size ChaCha20_neon,.-ChaCha20_neon
___
{
+my @K = map("v$_.4s",(0..6));
my ($T0,$T1,$T2,$T3,$T4,$T5)=@K;
my ($A0,$B0,$C0,$D0,$A1,$B1,$C1,$D1,$A2,$B2,$C2,$D2,
- $A3,$B3,$C3,$D3,$A4,$B4,$C4,$D4,$A5,$B5,$C5,$D5) = map("v$_.4s",(0..23));
+ $A3,$B3,$C3,$D3,$A4,$B4,$C4,$D4,$A5,$B5,$C5,$D5) = map("v$_.4s",(8..31));
+my $rot24 = @K[6];
+my $ONE = "v7.4s";
+
+sub NEONROUND {
+my $odd = pop;
+my ($a,$b,$c,$d,$t)=@_;
+
+ (
+ "&add ('$a','$a','$b')",
+ "&eor ('$d','$d','$a')",
+ "&rev32_16 ('$d','$d')", # vrot ($d,16)
+
+ "&add ('$c','$c','$d')",
+ "&eor ('$t','$b','$c')",
+ "&ushr ('$b','$t',20)",
+ "&sli ('$b','$t',12)",
+
+ "&add ('$a','$a','$b')",
+ "&eor ('$d','$d','$a')",
+ "&tbl ('$d','{$d}','$rot24')",
+
+ "&add ('$c','$c','$d')",
+ "&eor ('$t','$b','$c')",
+ "&ushr ('$b','$t',25)",
+ "&sli ('$b','$t',7)",
+
+ "&ext ('$c','$c','$c',8)",
+ "&ext ('$d','$d','$d',$odd?4:12)",
+ "&ext ('$b','$b','$b',$odd?12:4)"
+ );
+}
$code.=<<___;
.type ChaCha20_512_neon,%function
.L512_or_more_neon:
sub sp,sp,#128+64
+ eor $ONE,$ONE,$ONE
ldp @d[0],@d[1],[@x[0]] // load sigma
ld1 {@K[0]},[@x[0]],#16
ldp @d[2],@d[3],[$key] // load key
ld1 {@K[1],@K[2]},[$key]
ldp @d[6],@d[7],[$ctr] // load counter
ld1 {@K[3]},[$ctr]
- ld1 {$ONE},[@x[0]]
-#ifdef __ARMEB__
+ ld1 {$ONE}[0],[@x[0]]
+ add $key,@x[0],#16 // .Lrot24
+#ifdef __AARCH64EB__
rev64 @K[0],@K[0]
ror @d[2],@d[2],#32
ror @d[3],@d[3],#32
mov $C4,@K[2]
stp @K[3],@K[4],[sp,#48] // off-load key block, variable part
mov $C5,@K[2]
- str @K[5],[sp,#80]
+ stp @K[5],@K[6],[sp,#80]
mov $ctr,#5
+ ld1 {$rot24},[$key]
subs $len,$len,#512
.Loop_upper_neon:
sub $ctr,$ctr,#1
add @x[14],@x[14],@x[15],lsl#32
ldp @x[13],@x[15],[$inp,#48]
add $inp,$inp,#64
-#ifdef __ARMEB__
+#ifdef __AARCH64EB__
rev @x[0],@x[0]
rev @x[2],@x[2]
rev @x[4],@x[4]
add.32 @x[2],@x[2],@d[1]
ldp @K[4],@K[5],[sp,#64]
add @x[3],@x[3],@d[1],lsr#32
+ ldr @K[6],[sp,#96]
add $A0,$A0,@K[0]
add.32 @x[4],@x[4],@d[2]
add $A1,$A1,@K[0]
add $inp,$inp,#64
add $B5,$B5,@K[1]
-#ifdef __ARMEB__
+#ifdef __AARCH64EB__
rev @x[0],@x[0]
rev @x[2],@x[2]
rev @x[4],@x[4]
b.hs .Loop_outer_512_neon
adds $len,$len,#512
- ushr $A0,$ONE,#2 // 4 -> 1
+ ushr $ONE,$ONE,#1 // 4 -> 2
ldp d8,d9,[sp,#128+0] // meet ABI requirements
ldp d10,d11,[sp,#128+16]
ldp d12,d13,[sp,#128+32]
ldp d14,d15,[sp,#128+48]
- stp @K[0],$ONE,[sp,#0] // wipe off-load area
- stp @K[0],$ONE,[sp,#32]
- stp @K[0],$ONE,[sp,#64]
+ stp @K[0],@K[0],[sp,#0] // wipe off-load area
+ stp @K[0],@K[0],[sp,#32]
+ stp @K[0],@K[0],[sp,#64]
b.eq .Ldone_512_neon
+ sub $key,$key,#16 // .Lone
cmp $len,#192
- sub @K[3],@K[3],$A0 // -= 1
- sub @K[4],@K[4],$A0
- sub @K[5],@K[5],$A0
add sp,sp,#128
+ sub @K[3],@K[3],$ONE // -= 2
+ ld1 {$CTR,$ROT24},[$key]
b.hs .Loop_outer_neon
eor @K[1],@K[1],@K[1]
s/\`([^\`]*)\`/eval $1/geo;
(s/\b([a-z]+)\.32\b/$1/ and (s/x([0-9]+)/w$1/g or 1)) or
- (m/\b(eor|ext|mov)\b/ and (s/\.4s/\.16b/g or 1)) or
+ (m/\b(eor|ext|mov|tbl)\b/ and (s/\.4s/\.16b/g or 1)) or
(s/\b((?:ld|st)1)\.8\b/$1/ and (s/\.4s/\.16b/g or 1)) or
(m/\b(ld|st)[rp]\b/ and (s/v([0-9]+)\.4s/q$1/g or 1)) or
+ (m/\b(dup|ld1)\b/ and (s/\.4(s}?\[[0-3]\])/.$1/g or 1)) or
+ (s/\b(zip[12])\.64\b/$1/ and (s/\.4s/\.2d/g or 1)) or
(s/\brev32\.16\b/rev32/ and (s/\.4s/\.8h/g or 1));
#s/\bq([0-9]+)#(lo|hi)/sprintf "d%d",2*$1+($2 eq "hi")/geo;
projects / thirdparty / openssl.git / commitdiff
