Merge pull request #16678 from poettering/loop-configure
[thirdparty/systemd.git] / TODO
1 Bugfixes:
3 * Many manager configuration settings that are only applicable to user
4 manager or system manager can be always set. It would be better to reject
5 them when parsing config.
7 External:
9 * Fedora: add an rpmlint check that verifies that all unit files in the RPM are listed in %systemd_post macros.
11 Janitorial Clean-ups:
13 * Rearrange tests so that the various test-xyz.c match a specific src/basic/xyz.c again
15 * rework mount.c and swap.c to follow proper state enumeration/deserialization
16 semantics, like we do for device.c now
18 Features:
20 * make use of the new statx mountid and rootmount fields in path_get_mnt_id()
21 and fd_is_mount_point()
23 * nspawn: move "incoming mount" directory to /run/host, move "inaccessible"
24 nodes to /run/host, move notify socket (for sd_notify() between payload and
25 container manager)
27 * make use of new glibc 2.32 APIs sigabbrev_np() and strerrorname_np().
29 * cryptsetup: if keyfile specified in crypttab is AF_UNIX socket, connect to it
30 and read from it (like we do elsewhere with READ_FULL_FILE_CONNECT_SOCKET)
32 * when main nspawn supervisor process gets suspended due to SIGSTOP/SIGTTOU or
33 so, freeze the payload too.
35 * repart: support setting up dm-integrity with HMAC
37 * add /etc/integritytab, to support dm-integrity setups. In particular those
38 with HMAC as hash function, so that we can have a protected /home without
39 encryption (leaving encryption to the individual dirs/homed).
41 * complement root=, rootflags=, rootfstype= with rootsubdir= which allows
42 mounting a subdir of the root fs as actual root. This can be used as
43 fstype-agnostic version of btrfs' rootflags=subvol=foobar.
45 * add --copy-from and --copy-to command to systemd-dissect which copies stuff
46 in and out of a disk image
48 * Support ProtectProc= or so, using:
50 * if /usr/bin/swapoff fails due to OOM, log a friendly explanatory message about it
52 * build short web pages out of each catalog entry, build them along with man
53 pages, and include hyperlinks to them in the journal output
55 * machined: add API to acquire UID range. add API to mount/dissect loopback
56 file. Both protected by PK. Then make nspawn use these APIs to run
57 unprivileged containers. i.e. push the truly privileged bits into machined,
58 so that the client side can remain entirely unprivileged, with SUID or
59 anything like that.
61 * journald: do journal file writing out-of-process, with one writer process per
62 client UID, so that synthetic hash table collisions can slow down a specific
63 user's journal stream down but not the others.
65 * add "throttling" to sd-event event sources: optionally, when we wake up too
66 often for one, let's turn it off entirely for a while. Use that for the
67 /proc/self/mountinfo logic.
69 * move our systemd-user PAM snippet to /usr/, which PAM appears to support
70 these days
72 * nspawn: support time namespaces
74 * systemd-firstboot: make sure to always use chase_symlinks() before
75 reading/writing files
77 * add ConditionSecurity=tpm2
79 * Remove any support for booting without /usr pre-mounted in the initrd entirely.
80 Update accordingly.
82 * pid1: Move to tracking of main pid/control pid of units per pidfd
84 * pid1: support new clone3() fork-into-cgroup feature
86 * pid1: also remove PID files of a service when the service starts, not just
87 when it exits
89 * make us use dynamically fewer deps for containers in general purpose distros:
90 o turn into dlopen() deps:
91 - libpwquality (always) - only relevant for homed, and maybe soon
92 firstboot
93 - elfutils (always)
94 - p11-kit-trust (always)
95 - kmod-libs (only when called from PID 1)
96 - cryptsetup-libs (only in RootImage= handling in PID 1, but not in systemd-cryptsetup)
97 - similar: libblkid
98 - libpam (only when called from PID 1)
99 - bzip2, xz, lz4 (always — gzip and zstd should probably stay static deps the way they are,
100 since they are so basic and our defaults)
101 o move into separate .so
102 - iptables-libs (only used by nspawn + networkd)
104 * seccomp: when SystemCallArchitectures=native is set then don't install any
105 other seccomp filters for any of the other archs, in order to reduce the
106 number of seccomp filters we install needlessly.
108 * seccomp: maybe use seccomp_merge() to merge our filters per-arch if we can.
109 Apparently kernel performance is much better with fewer larger seccomp
110 filters than with more smaller seccomp filters.
112 * systemd-path: add ESP and XBOOTLDR path. Add "private" runtime/state/cache dir enum,
113 mapping to $RUNTIME_DIRECTORY, $STATE_DIRECTORY and such
115 * make "systemd-dissect" an official supported tool, i.e. move to /usr/bin/ and
116 provide man page. Given that we now have a tool that can generate images like
117 this, it's useful to have one that can dump contents of them, too.
119 * All tools that support --root= should also learn --image= so that they can
120 operate on disk images directly. Specifically: bootctl, systemctl,
121 coredumpctl. (Already done: systemd-nspawn, systemd-firstboot,
122 systemd-repart, systemd-tmpfiles, systemd-sysusers, journalctl)
124 * seccomp: by default mask x32 ABI system wide on x86-64. it's on its way out
126 * seccomp: don't install filters for ABIs that are masked anyway for the
127 specific service
129 * seccomp: maybe merge all filters we install into one with that libseccomp API that allows merging.
131 * per-service credential system. Specifically: add LoadCredential= (for loading
132 cred from file), AcquireCredential= (for asking user for cred, via
133 ask-password), PassCredential= (for passing on credential systemd itself
134 got). Then, place credentials in a per-service, immutable ramfs instance (so
135 that it cannot be swapped out), destroy after use. Also pass via keyring
136 (with graceful fallback to cover for containers). Define CredentialPath= for
137 defining subdir of /run/credentials/ where to place it. Set $CREDENTIAL_PATH
138 env var for services to the result. Also pass via fd passing (optionally).
140 * homed: add native recovery key support. use 48 lowercase modhex characters
141 (192bit), show qr code of it, include pattern expression in user record.
143 * homed: introduce "degraded" state for home directories that weren't cleanly
144 unmounted (use xattr we add and remove on the loop back file)
146 * homed: during login resize fs automatically towards size goal. Specifically,
147 resize to diskSize if possible, but leave a certain amount (configured by a
148 new value diskLeaveFreeSize) of space free on the backing fs.
150 * homed: permit multiple user record signing keys to be used locally, and pick
151 the right one for signing records automatically depending on a pre-existing
152 signature
154 * homed: add a way to "adopt" a home directory, i.e. strip foreign signatures
155 and insert a local signature instead.
157 * homed: as an extension to the directory+subvolume backend: if located on
158 especially marked fs, then sync down password into LUKS header of that fs,
159 and always verify passwords against it too. Bootstrapping is a problem
160 though: if no one is logged in (or no other user even exists yet), how do you
161 unlock the volume in order to create the first user and add the first pw.
163 * homed: support new FS_IOC_ADD_ENCRYPTION_KEY ioctl for setting up fscrypt
165 * homed: maybe pre-create ~/.cache as subvol so that it can have separate quota
166 easily?
168 * busctl: maybe expose a verb "ping" for pinging a dbus service to see if it
169 exists and responds.
171 * when systemd-nspawn and suchlike dissect an OS image, and there are multiple
172 root partitions, do an strverscmp() on the partition label and boot
173 first. That is inspired how sd-boot figures out which kernel to boot, and
174 thus allows defining OS images which can be A/B updated and we default to the
175 newest version automatically, both in nspawn and in sd-boot
177 * cryptsetup: support FIDO2 tokens for deriving keys (i.e. do what homed can do
178 also in plain cryptsetup)
180 * systemd-gpt-auto should probably set x-systemd.growfs on the mounts it
181 creates
183 * homed/userdb: distinguish passwords and recovery keys in the records, since
184 we probably want to use different PBKDF algorithms/settings for them:
185 passwords have low entropy but recovery keys should have good entropy key
186 hence we can make them quicker to work.
188 * bootctl:
189 - teach it to prepare an ESP wholesale, i.e. with mkfs.vfat invocation
190 - teach it to copy in unified kernel images and maybe type #1 boot loader spec entries from host
191 - make it operate on loopback files, dissecting enough to find ESP to operate on
193 * Maybe add a separate GPT partition type to the discoverable partition spec
194 for "hibernate" partitions, that are exactly like swap partitions but only
195 activated right before hibernation and thus never used for regular swapping.
197 * by default, in systemd --user service bump the OOMAdjust to 100, as privs
198 allow so that systemd survives
200 * cryptsetup: allow encoding key directly in /etc/crypttab, maybe with a
201 "base64:" prefix. Useful in particular for pkcs11 mode.
203 * cryptsetup: reimplement the mkswap/mke2fs in cryptsetup-generator to use
204 systemd-makefs.service instead.
206 * socket units: allow creating a udev monitor socket with ListenDevices= or so,
207 with matches, then activate app through that passing socket over
209 * unify on openssl (as soon as OpenSSL 3.0 is out, and the Debian license
210 confusion is gone)
211 - port sd_id128_get_machine_app_specific() over from khash
212 - port resolved over from libgcrypt (DNSSEC code)
213 - port journald + fsprg over from libgcrypt
214 - port importd over from libgcrypt
215 - when that's done: kill khash.c
216 - when that's done: kill gnutls support in resolved
218 * kill zenata, all hail weblate?
220 * when we resize disks (homed?) always round up to 4K sectors, not 512K
222 * add growvol and makevol options for /etc/crypttab, similar to
223 x-systemd.growfs and x-systemd-makefs.
225 * hook up the TPM to /etc/crypttab, with a new option that is similar to the
226 new PKCS#11 option in crypttab, and allows unlocking a LUKS volume via a key
227 unsealed from the TPM. Optionally, if TPM is not available fall back to
228 TPM-less mode, and set up linear DM mapping instead (inspired by kpartx), so
229 that the device paths stay the same, regardless if crypto is used or not.
231 * systemd-repart: by default generate minimized partition tables (i.e. tables
232 that only cover the space actually used, excluding any free space at the
233 end), in order to maximize dd'ability. Requires libfdisk work, see
236 * systemd-repart: MBR partition table support. Care needs to be taken regarding
237 Type=, so that partition definitions can sanely apply to both the GPT and the
238 MBR case. Idea: accept syntax "Type=gpt:home mbr:0x83" for setting the types
239 for the two partition types explicitly. And provide an internal mapping so
240 that "Type=linux-generic" maps to the right types for both partition tables
241 automatically.
243 * systemd-repart: allow sizing partitions as factor of available RAM, so that
244 we can reasonably size swap partitions for hibernation.
246 * systemd-repart: allow running mkfs before making partitions pop up +
247 encryption via LUKS to allow booting into an empty root with only /usr mounted in
249 * systemd-repart: allow managing the gpt read-only partition flag + auto-mount flag
251 * systemd-repart: allow boolean option that ensures that if existing partition
252 doesn't exist within the configured size bounds the whole command fails. This
253 is useful to implement ESP vs. XBOOTLDR schemes in installers: have one set
254 of repart files for the case where ESP is large enough and one where it isn't
255 and XBOOTLDR is added in instead. Then apply the former first, and if it
256 fails to apply use the latter.
258 * systemd-repart: add per-partition option to never reuse existing partition
259 and always create anew even if matching partition already exists.
261 * systemd-repart: add per-partition option to fail if partition already exist,
262 i.e. is not added new. Similar, add option to fail if partition does not exist yet.
264 * systemd-repart: add --size=auto for generating/resizing images of minimal
265 size, i.e. where the image file is sized exactly as large as necessary taking
266 SizeMin= into account, but not a single byte larger.
268 * systemd-repart: allow disabling growing of specific partitions, or making
269 them (think ESP: we don't ever want to grow it, since we cannot resize vfat)
271 * systemd-repart: make it a static checker during early boot for existence and
272 absence of other partitions for trusted boot environments
274 * userdb: allow username prefix searches in varlink API, allow realname and
275 realname substr searches in varlink API
277 * userdb: allow uid/gid range checks
279 * userdb: allow existence checks
281 * pid1: activation by journal search expression
283 * when switching root from initrd to host, set the machine_id env var so that
284 if the host has no machine ID set yet we continue to use the random one the
285 initrd had set.
287 * sd-event: add native support for P_ALL waitid() watching, then move PID 1 to
288 it fo reaping assigned but unknown children. This needs to some special care
289 to operate somewhat sensibly in light of priorities: P_ALL will return
290 arbitrary processes, regardless of the priority we want to watch them with,
291 hence on each event loop iteration check all processes which we shall watch
292 with higher prio explicitly, and then watch the entire rest with P_ALL.
294 * tweak sd-event's child watching: keep a prioq of children to watch and use
295 waitid() only on the children with the highest priority until one is waitable
296 and ignore all lower-prio ones from that point on
298 * maybe introduce xattrs that can be set on the root dir of the root fs
299 partition that declare the volatility mode to use the image in. Previously I
300 thought marking this via GPT partition flags but that's not ideal since
301 that's outside of the LUKS encryption/verity verification, and we probably
302 shouldn't operate in a volatile mode unless we got told so from a trusted
303 source.
305 * figure out automatic partition discovery when combining writable root dir
306 with immutable /usr
308 * coredump: maybe when coredumping read a new xattr from /proc/$PID/exe that
309 may be used to mark a whole binary as non-coredumpable. Would fix:
312 * teach parse_timestamp() timezones like the calendar spec already knows it
314 * beef up hibernation to optionally do swapon/swapoff immediately before/after
315 the hibernation
317 * beef up s2h to implement a battery watch loop: instead of entering
318 hibernation unconditionally after coming back from resume make a decision
319 based on the battery load level: if battery level is above a specific
320 threshold, go to suspend again, only hibernate if below it. This means we'd
321 stick to suspend usually, but fall back to hibernation only when battery runs
322 empty (well, subject to our sampling interval). Related to this, check if we
323 can make ACPI _BTP (i.e. /sys/class/power_supply/*/alarm) work for us too,
324 i.e. see if it can wake up machines from suspend, so that we could resume
325 automatically when the system is low on power and move automatically to
326 hibernation mode. (see
328 section and
330 at the end).
332 * add an explicit "vertical" mode to format-table, so that "systemctl
333 status"-like outputs (i.e. with a series of field names left and values
334 right) become genuine first class citizens, and we gain automatic, sane JSON
335 output for them.
337 * We should probably replace /var/log/README, /etc/rc.d/README with symlinks
338 that are linked to these places instead of copied. After all they are
339 constant vendor data.
341 * maybe add kernel cmdline params: to force random seed crediting
343 * nspawn: on cgroupsv1 issue cgroup empty handler process based on host events,
344 so that we make cgroup agent logic safe
346 * nspawn/machined: add API to invoke binary in container, then use that as
347 fallback in "machinectl shell"
349 * logind: rework pam_logind to also do a bus call in case of invocation from
350 user@.service, which returns the XDG_RUNTIME_DIR value, and make this
351 behaviour selectable via pam module option.
353 * homed:
354 - when user tries to log into record signed by unrecognized key, automatically add key to our chain after polkit auth
355 - rollback when resize fails mid-operation
356 - GNOME's side for forget key on suspend (requires rework so that lock screen runs outside of uid)
357 - resize on login?
358 - shrink fs on logout?
359 - update LUKS password on login if we find there's a password that unlocks the JSON record but not the LUKS device.
360 - create on activate?
361 - properties: icon url?, preferred session type?, administrator bool (which translates to 'wheel' membership)?, address?, telephone?, vcard?, samba stuff?, parental controls?
362 - communicate clearly when usb stick is safe to remove. probably involves
363 beefing up logind to make pam session close hook synchronous and wait until
364 systemd --user is shut down.
365 - logind: maybe keep a "busy fd" as long as there's a non-released session around or the user@.service
366 - maybe make automatic, read-only, time-based reflink-copies of LUKS disk
367 images (and btrfs snapshots of subvolumes) (think: time machine)
368 - distinguish destroy / remove (i.e. currently we can unregister a user, unregister+remove their home directory, but not just remove their home directory)
369 - in systemd's PAMName= logic: query passwords with ssh-askpassword, so that we can make "loginctl set-linger" mode work
370 - fingerprint authentication, pattern authentication, …
371 - make sure "classic" user records can also be managed by homed
372 - make size of $XDG_RUNTIME_DIR configurable in user record
373 - reuse pwquality magic in firstboot
374 - query password from kernel keyring first
375 - update even if record is "absent"
376 - add a "access mode" + "fstype" field to the "status" section of json identity records reflecting the actually used access mode and fstype, even on non-luks backends
377 - move acct mgmt stuff from pam_systemd_home to pam_systemd?
378 - when "homectl --pkcs11-token-uri=" is used, synthesize ssh-authorized-keys records for all keys we have private keys on the stick for
379 - make slice for users configurable (requires logind rework)
380 - logind: populate auto-login list bus property from PKCS#11 token
381 - when determining state of a LUKS home directory, check DM suspended sysfs file
382 - introduce API for "making room", that grows/shrinks home directory
383 according to elastic parameters, discards blocks, and removes additional snapshots. Call it
384 either from UI when disk space gets low
386 * introduce a new per-process uuid, similar to the boot id, the machine id, the
387 invocation id, that is derived from process creds, specifically a hashed
388 combination of AT_RANDOM + getpid() + the starttime from
389 /proc/self/status. Then add these ids implicitly when logging. Deriving this
390 uuid from these three things has the benefit that it can be derived easily
391 from /proc/$PID/ in a stable, and unique way that changes on both fork() and
392 exec().
394 * let's not GC a unit while its ratelimits are still pending
396 * when killing due to service watchdog timeout maybe detect whether target
397 process is under ptracing and then log loudly and continue instead.
399 * introduce a new group to own TPM devices
401 * make rfkill uaccess controllable by default, i.e. steal rule from
402 gnome-bluetooth and friends
404 * tweak journald context caching. In addition to caching per-process attributes
405 keyed by PID, cache per-cgroup attributes (i.e. the various xattrs we read)
406 keyed by cgroup path, and guarded by ctime changes. This should provide us
407 with a nice speed-up on services that have many processes running in the same
408 cgroup.
410 * make MAINPID= message reception checks even stricter: if service uses User=,
411 then check sending UID and ignore message if it doesn't match the user or
412 root.
414 * maybe trigger a uevent "change" on a device if "systemctl reload xyz.device"
415 is issued.
417 * when importing an fs tree with machined, optionally apply userns-rec-chown
419 * when importing an fs tree with machined, complain if image is not an OS
421 * Maybe introduce a helper safe_exec() or so, which is to execve() which
422 safe_fork() is to fork(). And then make revert the RLIMIT_NOFILE soft limit
423 to 1K implicitly, unless explicitly opted-out.
425 * rework seccomp/nnp logic that even if User= is used in combination with
426 a seccomp option we don't have to set NNP. For that, change uid first whil
427 keeping CAP_SYS_ADMIN, then apply seccomp, the drop cap.
429 * add a concept for automatically loading per-unit secrets off disk and
430 inserting them into the kernel keyring. Maybe SecretsDirectory= similar to
431 ConfigurationDirectory=.
433 * when no locale is configured, default to UEFI's PlatformLang variable
435 * bootctl,sd-boot: actually honour the "architecture" key
437 * add a new syscall group "@esoteric" for more esoteric stuff such as bpf() and
438 usefaultd() and make systemd-analyze check for it.
440 * paranoia: whenever we process passwords, call mlock() on the memory
441 first. i.e. look for all places we use free_and_erasep() and
442 augment them with mlock(). Also use MADV_DONTDUMP.
444 * Move RestrictAddressFamily= to the new cgroup create socket
446 * support the bind/connect/sendmsg cgroup stuff for sandboxing, and possibly
447 patching around
449 * maybe implicitly attach monotonic+realtime timestamps to outgoing messages in
450 log.c and sd-journal-send
452 * optionally: turn on cgroup delegation for per-session scope units
454 * introduce per-unit (i.e. per-slice, per-service) journal log size limits.
456 * sd-boot: automatically load EFI modules from some drop-in dir, so that people
457 can add in file system drivers and such
459 * sd-boot: optionally, show boot menu when previous default boot item has
460 non-zero "tries done" count
462 * introduce an option (or replacement) for "systemctl show" that outputs all
463 properties as JSON, similar to busctl's new JSON output. In contrast to that
464 it should skip the variant type string though.
466 * augment CODE_FILE=, CODE_LINE= with something like CODE_BASE= or so which
467 contains some identifier for the project, which allows us to include
468 clickable links to source files generating these log messages. The identifier
469 could be some abberviated URL prefix or so (taking inspiration from Go
470 imports). For example, for systemd we could use
471 or so which is
472 sufficient to build a link by prefixing "http://" and suffixing the
475 * Augment MESSAGE_ID with MESSAGE_BASE, in a similar fashion so that we can
476 make clickable links from log messages carrying a MESSAGE_ID, that lead to
477 some explanatory text online.
479 * maybe extend .path units to expose fanotify() per-mount change events
481 * Add a "systemctl list-units --by-slice" mode or so, which rearranges the
482 output of "systemctl list-units" slightly by showing the tree structure of
483 the slices, and the units attached to them.
485 * the a-posteriori stopping of units bound to units that disappeared logic
486 should be reworked: there should be a queue of units, and we should only
487 enqueue stop jobs from a defer event that processes queue instead of
488 right-away when we find a unit that is bound to one that doesn't exist
489 anymore. (similar to how the stop-unneeded queue has been reworked the same
490 way)
492 * nspawn: make nspawn suitable for shell pipelines: instead of triggering a
493 hangup when input is finished, send ^D, which synthesizes an EOF. Then wait
494 for hangup or ^D before passing on the EOF.
496 * When reloading configuration PID 1 should reset all its properties to the
497 original defaults before calling parse_config()
499 * nspawn: greater control over selinux label?
501 * hibernate/s2h: make this robust and safe to enable in Fedora by default.
502 Specifically:
504 1. add resume_offset support to the resume code (i.e. support swap files
505 properly)
506 2. check if swap is on weird storage and refuse if so
507 3. add auto-detection of hibernation images
509 * cgroups: use inotify to get notified when somebody else modifies cgroups
510 owned by us, then log a friendly warning.
512 * beef up log.c with support for stripping ANSI sequences from strings, so that
513 it is OK to include them in log strings. This would be particularly useful so
514 that our log messages could contain clickable links for example for unit
515 files and suchlike we operate on.
517 * add support for "portablectl attach (i.e. importd integration)
519 * add attach --enable and attach --now (for attach+enable+start)
521 * sync dynamic uids/gids between host+portable srvice (i.e. if DynamicUser=1 is set for a service, make sure that the
522 selected user is resolvable in the service even if it ships its own /etc/passwd)
524 * Fix DECIMAL_STR_MAX or DECIMAL_STR_WIDTH. One includes a trailing NUL, the
525 other doesn't. What a disaster. Probably to exclude it. Also
526 DECIMAL_STR_WIDTH should probably add an extra "-" into account for negative
527 numbers.
529 * Check that users of inotify's IN_DELETE_SELF flag are using it properly, as
530 usually IN_ATTRIB is the right way to watch deleted files, as the former only
531 fires when a file is actually removed from disk, i.e. the link count drops to
532 zero and is not open anymore, while the latter happens when a file is
533 unlinked from any dir.
535 * port systemctl, busctl, … over to format-table.[ch]'s table formatters
537 * pid1: lock image configured with RootDirectory=/RootImage= using the usual nspawn semantics while the unit is up
539 * add --vacuum-xyz options to coredumpctl, matching those journalctl already has.
541 * introduce Ephemeral= unit file switch, that creates an ephemeral copy of all
542 files and directories that are left writable for a unit, and which are
543 removed after the unit goes down again. A bit like --ephemeral for
544 systemd-nspawn but for system services. If used together with RootImage= this
545 should reflink the image file itself.
547 Related: add Ephemeral=<path1> <path2> … which would allow marking
548 specific paths only like this.
550 * add CopyFile= or so as unit file setting that may be used to copy files or
551 directory trees from the host to the services RootImage= and RootDirectory=
552 environment. Which we can use for /etc/machine-id and in particular
553 /etc/resolv.conf. Should be smart and do something useful on read-only
554 images, for example fallback to read-only bind mounting the file instead.
556 * show invocation ID in systemd-run output
558 * bypass SIGTERM state in unit files if KillSignal is SIGKILL
560 * add proper dbus APIs for the various sd_notify() commands, such as MAINPID=1
561 and so on, which would mean we could report errors and such.
563 * teach tmpfiles.d q/Q logic something sensible in the context of XFS/ext4
564 project quota
566 * introduce DefaultSlice= or so in system.conf that allows changing where we
567 place our units by default, i.e. change system.slice to something
568 else. Similar, ManagerSlice= should exist so that PID1's own scope unit could
569 be moved somewhere else too. Finally machined and logind should get similar
570 options so that it is possible to move user session scopes and machines to a
571 different slice too by default. Usecase: people who want to put resources on
572 the entire system, with the exception of one specific service. See:
575 * maybe rework get_user_creds() to query the user database if $SHELL is used
576 for root, but only then.
578 * be stricter with fds we receive for the fdstore: close them asynchronously
580 * calenderspec: add support for week numbers and day numbers within a
581 year. This would allow us to define "bi-weekly" triggers safely.
583 * sd-bus: add vtable flag, that may be used to request client creds implicitly
584 and asynchronously before dispatching the operation
586 * make use of ethtool veth peer info in machined, for automatically finding out
587 host-side interface pointing to the container.
589 * add some special mode to LogsDirectory=/StateDirectory=… that allows
590 declaring these directories without necessarily pulling in deps for them, or
591 creating them when starting up. That way, we could declare that
592 systemd-journald writes to /var/log/journal, which could be useful when we
593 doing disk usage calculations and so on.
595 * taint systemd if there are fewer than 65536 users assigned (userns) to the system.
597 * deprecate RootDirectoryStartOnly= in favour of a new ExecStart= prefix char
599 * add a new RuntimeDirectoryPreserve= mode that defines a similar lifecycle for
600 the runtime dir as we maintain for the fdstore: i.e. keep it around as long
601 as the unit is running or has a job queued.
603 * support projid-based quota in machinectl for containers
605 * add a way to lock down cgroup migration: a boolean, which when set for a unit
606 makes sure the processes in it can never migrate out of it
608 * blog about fd store and restartable services
610 * document Environment=SYSTEMD_LOG_LEVEL=debug drop-in in debugging document
612 * rework ExecOutput and ExecInput enums so that EXEC_OUTPUT_NULL loses its
613 magic meaning and is no longer upgraded to something else if set explicitly.
615 * in the long run: permit a system with /etc/machine-id linked to /dev/null, to
616 make it lose its identity, i.e. be anonymous. For this we'd have to patch
617 through the whole tree to make all code deal with the case where no machine
618 ID is available.
620 * optionally, collect cgroup resource data, and store it in per-unit RRD files,
621 suitable for processing with rrdtool. Add bus API to access this data, and
622 possibly implement a CPULoad property based on it.
624 * beef up pam_systemd to take unit file settings such as cgroups properties as
625 parameters
627 * maybe hook of xfs/ext4 quotactl() with services? i.e. automatically manage
628 the quota of a the user indicated in User= via unit file settings, like the
629 other resource management concepts. Would mix nicely with DynamicUser=1. Or
630 alternatively, do this with projids, so that we can also cover services
631 running as root. Quota should probably cover all the special dirs such as
632 StateDirectory=, LogsDirectory=, CacheDirectory=, as well as RootDirectory= if it
633 is set, plus the whole disk space any image configured with RootImage=.
635 * In DynamicUser= mode: before selecting a UID, use disk quota APIs on relevant
636 disks to see if the UID is already in use.
638 * add "systemctl wait" or so, which does what "systemd-run --wait" does, but
639 for all units. It should be both a way to pin units into memory as well as a
640 wait to retrieve their exit data.
642 * expose IO accounting data on the bus, show it in systemd-run --wait and log
643 about it in the resource log message
645 * show whether a service has out-of-date configuration in "systemctl status" by
646 using mtime data of ConfigurationDirectory=.
648 * Add AddUser= setting to unit files, similar to DynamicUser=1 which however
649 creates a static, persistent user rather than a dynamic, transient user. We
650 can leverage code from sysusers.d for this.
652 * add some optional flag to ReadWritePaths= and friends, that has the effect
653 that we create the dir in question when the service is started. Example:
655 ReadWritePaths=:/var/lib/foobar
657 * maybe add call sd_journal_set_block_timeout() or so to set SO_SNDTIMEO for
658 the sd-journal logging socket, and, if the timeout is set to 0, sets
659 O_NONBLOCK on it. That way people can control if and when to block for
660 logging.
662 * hostnamed: populate form factor data from a new hwdb database, so that old
663 yogas can be recognized as "convertible" too, even if they predate the DMI
664 "convertible" form factor
666 * Maybe add PrivatePIDs= as new unit setting, and do minimal PID namespacing
667 after all. Be strict however, only support the equivalent of nspawn's
668 --as-pid2 switch, and sanely proxy sd_notify() messages dropping stuff such
669 as MAINPID.
671 * Add ExecMonitor= setting. May be used multiple times. Forks off a process in
672 the service cgroup, which is supposed to monitor the service, and when it
673 exits the service is considered failed by its monitor.
675 * track the per-service PAM process properly (i.e. as an additional control
676 process), so that it may be queried on the bus and everything.
678 * add a new "debug" job mode, that is propagated to unit_start() and for
679 services results in two things: we raise SIGSTOP right before invoking
680 execve() and turn off watchdog support. Then, use that to implement
681 "systemd-gdb" for attaching to the start-up of any system service in its
682 natural habitat.
684 * gpt-auto logic: related to the above, maybe support a "secondary" root
685 partition, that is mounted to / and is writable, and where the actual root's
686 /usr is mounted into.
688 * gpt-auto logic: support encrypted swap, add kernel cmdline option to force it, and honour a gpt bit about it, plus maybe a configuration file
690 * drop nss-myhostname in favour of nss-resolve?
692 * add a percentage syntax for TimeoutStopSec=, e.g. TimeoutStopSec=150%, and
693 then use that for the setting used in user@.service. It should be understood
694 relative to the configured default value.
696 * in networkd, when matching device types, fix up DEVTYPE rubbish the kernel passes to us
698 * enable LockMLOCK to take a percentage value relative to physical memory
700 * Permit masking specific netlink APIs with RestrictAddressFamily=
702 * nspawn: support that /proc, /sys/, /dev are pre-mounted
704 * define gpt header bits to select volatility mode
706 * ProtectClock= (drops CAP_SYS_TIMES, adds seecomp filters for settimeofday, adjtimex), sets DeviceAllow o /dev/rtc
708 * ProtectTracing= (drops CAP_SYS_PTRACE, blocks ptrace syscall, makes /sys/kernel/tracing go away)
710 * ProtectMount= (drop mount/umount/pivot_root from seccomp, disallow fuse via DeviceAllow, imply Mountflags=slave)
712 * ProtectKeyRing= to take keyring calls away
714 * RemoveKeyRing= to remove all keyring entries of the specified user
716 * ProtectReboot= that masks reboot() and kexec_load() syscalls, prohibits kill
717 on PID 1 with the relevant signals, and makes relevant files in /sys and
718 /proc (such as the sysrq stuff) unavailable
720 * make sure the ratelimit object can deal with USEC_INFINITY as way to turn off things
722 * journalctl: make sure -f ends when the container indicated by -M terminates
724 * mount: automatically search for "main" partition of an image has multiple
725 partitions
727 * in nss-systemd, if we run inside of RootDirectory= with PrivateUsers= set,
728 find a way to map the User=/Group= of the service to the right name. This way
729 a user/group for a service only has to exist on the host for the right
730 mapping to work.
732 * add bus API for creating unit files in /etc, reusing the code for transient units
734 * add bus API to remove unit files from /etc
736 * add bus API to retrieve current unit file contents (i.e. implement "systemctl cat" on the bus only)
738 * rework fopen_temporary() to make use of open_tmpfile_linkable() (problem: the
739 kernel doesn't support linkat() that replaces existing files, currently)
741 * transient units: don't bother with actually setting unit properties, we
742 reload the unit file anyway
744 * journald: sigbus API via a signal-handler safe function that people may call
745 from the SIGBUS handler
747 * optionally, also require WATCHDOG=1 notifications during service start-up and shutdown
749 * delay activation of logind until somebody logs in, or when /dev/tty0 pulls it
750 in or lingering is on (so that containers don't bother with it until PAM is used). also exit-on-idle
752 * cache sd_event_now() result from before the first iteration...
754 * PID1: find a way how we can reload unit file configuration for
755 specific units only, without reloading the whole of systemd
757 * add an explicit parser for LimitRTPRIO= that verifies
758 the specified range and generates sane error messages for incorrect
759 specifications.
761 * when we detect that there are waiting jobs but no running jobs, do something
763 * push CPUAffinity= also into the "cpuset" cgroup controller
765 * PID 1 should send out sd_notify("WATCHDOG=1") messages (for usage in the --user mode, and when run via nspawn)
767 * there's probably something wrong with having user mounts below /sys,
768 as we have for debugfs. for example, src/core/mount.c handles mounts
769 prefixed with /sys generally special.
772 * fstab-generator: default to tmpfs-as-root if only usr= is specified on the kernel cmdline
774 * docs: bring up to date
776 * add a job mode that will fail if a transaction would mean stopping
777 running units. Use this in timedated to manage the NTP service
778 state.
781 * The udev blkid built-in should expose a property that reflects
782 whether media was sensed in USB CF/SD card readers. This should then
783 be used to control SYSTEMD_READY=1/0 so that USB card readers aren't
784 picked up by systemd unless they contain a medium. This would mirror
785 the behaviour we already have for CD drives.
787 * networkd/udev: implement SR_IOV configuration in .link files:
790 * hostnamectl: show root image uuid
792 * Find a solution for SMACK capabilities stuff:
795 * "systemctl preset-all" should probably order the unit files it
796 operates on lexicographically before starting to work, in order to
797 ensure deterministic behaviour if two unit files conflict (like DMs
798 do, for example)
800 * synchronize console access with BSD locks:
803 * as soon as we have sender timestamps, revisit coalescing multiple parallel daemon reloads:
806 * figure out when we can use the coarse timers
808 * add "systemctl start -v foobar.service" that shows logs of a service
809 while the start command runs. This is non-trivial to do without
810 races though, since we should flush out all journal messages before
811 returning from the "systemctl stop".
813 * firstboot: make it useful to be run immediately after yum --installroot to set up a machine. (most specifically, make --copy-root-password work even if /etc/passwd already exists
815 * maybe add support for specifier expansion in user.conf, specifically DefaultEnvironment=
817 * maybe allow timer units with an empty Units= setting, so that they
818 can be used for resuming the system but nothing else.
820 * what to do about udev db binary stability for apps? (raw access is not an option)
822 * systemctl: if some operation fails, show log output?
824 * systemctl edit: use equivalent of cat() to insert existing config as a comment, prepended with #.
825 Upon editor exit, lines with one # are removed, lines with two # are left with one #, etc.
827 * exponential backoff in timesyncd when we cannot reach a server
829 * timesyncd: add ugly bus calls to set NTP servers per-interface, for usage by NM
831 * merge ~/.local/share and ~/.local/lib into one similar /usr/lib and /usr/share....
833 * add systemd.abort_on_kill or some other such flag to send SIGABRT instead of SIGKILL
834 (throughout the codebase, not only PID1)
836 * resolved:
837 - mDNS/DNS-SD
838 - service registration
839 - service/domain/types browsing
840 - avahi compat
841 - DNS-SD service registration from socket units
842 - resolved should optionally register additional per-interface LLMNR
843 names, so that for the container case we can establish the same name
844 (maybe "host") for referencing the server, everywhere.
845 - allow clients to request DNSSEC for a single lookup even if DNSSEC is off (?)
846 - hook up resolved with machined-based address resolution
848 * refcounting in sd-resolve is borked
850 * Add a new verb "systemctl top"
852 * add new gpt type for btrfs volumes
854 * support empty /etc boots nicely:
855 - nspawn/gpt-generator: introduce new gpt partition type for /usr
857 * generator that automatically discovers btrfs subvolumes, identifies their purpose based on some xattr on them.
859 * a way for container managers to turn off getty starting via $container_headless= or so...
861 * figure out a nice way how we can let the admin know what child/sibling unit causes cgroup membership for a specific unit
863 * For timer units: add some mechanisms so that timer units that trigger immediately on boot do not have the services
864 they run added to the initial transaction and thus confuse Type=idle.
866 * add bus api to query unit file's X fields.
868 * gpt-auto-generator:
869 - Define new partition type for encrypted swap? Support probed LUKS for encrypted swap?
870 - Make /home automount rather than mount?
872 * add generator that pulls in systemd-network from containers when
873 CAP_NET_ADMIN is set, more than the loopback device is defined, even
874 when it is otherwise off
876 * MessageQueueMessageSize= (and suchlike) should use parse_iec_size().
878 * implement Distribute= in socket units to allow running multiple
879 service instances processing the listening socket, and open this up
880 for ReusePort=
882 * introduce bus call FreezeUnit(s, b), as well as "systemctl freeze
883 $UNIT" and "systemctl thaw $UNIT" as wrappers around this. The calls
884 should SIGSTOP all unit processes in a loop until all processes of
885 it are fully stopped. This can later be used for app management by
886 desktop UIs such as gnome-shell to freeze apps that are not visible
887 on screen, not unlike how job control works on the shell
889 * cgroups:
890 - implement per-slice CPUFairScheduling=1 switch
891 - introduce high-level settings for RT budget, swappiness
892 - how to reset dynamically changed unit cgroup attributes sanely?
893 - when reloading configuration, apply new cgroup configuration
894 - when recursively showing the cgroup hierarchy, optionally also show
895 the hierarchies of child processes
897 * transient units:
898 - add field to transient units that indicate whether systemd or somebody else saves/restores its settings, for integration with libvirt
900 * when we detect low battery and no AC on boot, show pretty splash and refuse boot
902 * libsystemd-journal, libsystemd-login, libudev: add calls to easily attach these objects to sd-event event loops
904 * be more careful what we export on the bus as (usec_t) 0 and (usec_t) -1
906 * rfkill,backlight: we probably should run the load tools inside of the udev rules so that the state is properly initialized by the time other software sees it
908 * After coming back from hibernation reset hibernation swap partition using the /dev/snapshot ioctl APIs
910 * If we try to find a unit via a dangling symlink, generate a clean
911 error. Currently, we just ignore it and read the unit from the search
912 path anyway.
914 * refuse boot if /usr/lib/os-release is missing or /etc/machine-id cannot be set up
916 * man: the documentation of Restart= currently is very misleading and suggests the tools from ExecStartPre= might get restarted.
918 * load .d/*.conf dropins for device units
920 * sd-bus:
921 - EBADSLT handling
922 - GetAllProperties() on a non-existing object does not result in a failure currently
923 - port to sd-resolve for connecting to TCP dbus servers
924 - see if we can introduce a new sd_bus_get_owner_machine_id() call to retrieve the machine ID of the machine of the bus itself
925 - see if we can drop more message validation on the sending side
926 - add API to clone sd_bus_message objects
927 - longer term: priority inheritance
928 - dbus spec updates:
929 - NameLost/NameAcquired obsolete
930 - GVariant
931 - path escaping
932 - update systemd.special(7) to mention that dbus.socket is only about the compatibility socket now
934 * sd-event
935 - allow multiple signal handlers per signal?
936 - document chaining of signal handler for SIGCHLD and child handlers
937 - define more intervals where we will shift wakeup intervals around in, 1h, 6h, 24h, ...
938 - maybe support iouring as backend, so that we allow hooking read and write
939 operations instead of IO ready events into event loops. See considerations
940 here:
943 * investigate endianness issues of UUID vs. GUID
945 * dbus: when a unit failed to load (i.e. is in UNIT_ERROR state), we
946 should be able to safely try another attempt when the bus call LoadUnit() is invoked.
948 * add a pam module that passes the hdd passphrase into the PAM stack and then expires it, for usage by gdm auto-login.
950 * add a pam module that on password changes updates any LUKS slot where the password matches
952 * test/:
953 - add unit tests for config_parse_device_allow()
955 * seems that when we follow symlinks to units we prefer the symlink
956 destination path over /etc and /usr. We should not do that. Instead
957 /etc should always override /run+/usr and also any symlink
958 destination.
960 * when isolating, try to figure out a way how we implicitly can order
961 all units we stop before the isolating unit...
963 * teach ConditionKernelCommandLine= globs or regexes (in order to match foobar={no,0,off})
965 * Add ConditionDirectoryNotEmpty= handle non-absoute paths as a search path or add
966 ConditionConfigSearchPathNotEmpty= or different syntax? See the discussion starting at
969 * BootLoaderSpec: Clarify that the kernel has to be in $BOOT. Clarify
970 that the boot loader should be installed to the ESP. Define a way
971 how an installer can figure out whether a BLS compliant boot loader
972 is installed.
974 * think about requeuing jobs when daemon-reload is issued? usecase:
975 the initrd issues a reload after fstab from the host is accessible
976 and we might want to requeue the mounts local-fs acquired through
977 that automatically.
979 * systemd-inhibit: make taking delay locks useful: support sending SIGINT or SIGTERM on PrepareForSleep()
981 * remove any syslog support from log.c — we probably cannot do this before split-off udev is gone for good
983 * shutdown logging: store to EFI var, and store to USB stick?
985 * merge unit_kill_common() and unit_kill_context()
987 * EFI:
988 - honor language efi variables for default language selection (if there are any?)
989 - honor timezone efi variables for default timezone selection (if there are any?)
990 - change bootctl to be backed by systemd-bootd to control temporary and persistent default boot goal plus efi variables
991 * bootctl
992 - recognize the case when not booted on EFI
994 * maybe do not install getty@tty1.service symlink in /etc but in /usr?
996 * print a nicer explanation if people use variable/specifier expansion in ExecStart= for the first word
998 * mount: turn dependency information from /proc/self/mountinfo into dependency information between systemd units.
1000 * logind:
1001 - logind: optionally, ignore idle-hint logic for autosuspend, block suspend as long as a session is around
1002 - logind: wakelock/opportunistic suspend support
1003 - Add pretty name for seats in logind
1004 - logind: allow showing logout dialog from system?
1005 - add Suspend() bus calls which take timestamps to fix double suspend issues when somebody hits suspend and closes laptop quickly.
1006 - if pam_systemd is invoked by su from a process that is outside of a
1007 any session we should probably just become a NOP, since that's
1008 usually not a real user session but just some system code that just
1009 needs setuid().
1010 - logind: make the Suspend()/Hibernate() bus calls wait for the for
1011 the job to be completed. before returning, so that clients can wait
1012 for "systemctl suspend" to finish to know when the suspending is
1013 complete.
1014 - logind: when the power button is pressed short, just popup a
1015 logout dialog. If it is pressed for 1s, do the usual
1016 shutdown. Inspiration are Macs here.
1017 - expose "Locked" property on logind sesison objects
1018 - maybe allow configuration of the StopTimeout for session scopes
1019 - rename session scope so that it includes the UID. THat way
1020 the session scope can be arranged freely in slices and we don't have
1021 make assumptions about their slice anymore.
1022 - follow PropertiesChanged state more closely, to deal with quick logouts and
1023 relogins
1024 - (optionally?) spawn seat-manager@$SEAT.service whenever a seat shows up that as CanGraphical set
1026 * journal:
1027 - consider introducing implicit _TTY= + _PPID= + _EUID= + _EGID= + _FSUID= + _FSGID= fields
1028 - journald: also get thread ID from client, plus thread name
1029 - journal: when waiting for journal additions in the client always sleep at least 1s or so, in order to minimize wakeups
1030 - add API to close/reopen/get fd for journal client fd in libsystemd-journal.
1031 - fallback to /dev/log based logging in libsystemd-journal, if we cannot log natively?
1032 - declare the local journal protocol stable in the wiki interface chart
1033 - sd-journal: speed up sd_journal_get_data() with transparent hash table in bg
1034 - journald: when dropping msgs due to ratelimit make sure to write
1035 "dropped %u messages" not only when we are about to print the next
1036 message that works, but already after a short timeout
1037 - check if we can make journalctl by default use --follow mode inside of less if called without args?
1038 - maybe add API to send pairs of iovecs via sd_journal_send
1039 - journal: add a setgid "systemd-journal" utility to invoke from libsystemd-journal, which passes fds via STDOUT and does PK access
1040 - journactl: support negative filtering, i.e. FOOBAR!="waldo",
1041 and !FOOBAR for events without FOOBAR.
1042 - journal: store timestamp of journal_file_set_offline() in the header,
1043 so it is possible to display when the file was last synced.
1044 - journal-send.c, log.c: when the log socket is clogged, and we drop, count this and write a message about this when it gets unclogged again.
1045 - journal: find a way to allow dropping history early, based on priority, other rules
1046 - journal: When used on NFS, check payload hashes
1047 - journald: add kernel cmdline option to disable ratelimiting for debug purposes
1048 - refuse taking lower-case variable names in sd_journal_send() and friends.
1049 - journald: we currently rotate only after MaxUse+MaxFilesize has been reached.
1050 - journal: deal nicely with byte-by-byte copied files, especially regards header
1051 - journal: sanely deal with entries which are larger than the individual file size, but where the components would fit
1052 - Replace utmp, wtmp, btmp, and lastlog completely with journal
1053 - journalctl: instead --after-cursor= maybe have a --cursor=XYZ+1 syntax?
1054 - when a kernel driver logs in a tight loop, we should ratelimit that too.
1055 - journald: optionally, log debug messages to /run but everything else to /var
1056 - journald: when we drop syslog messages because the syslog socket is
1057 full, make sure to write how many messages are lost as first thing
1058 to syslog when it works again.
1059 - journald: allow per-priority and per-service retention times when rotating/vacuuming
1060 - journald: make use of uid-range.h to managed uid ranges to split
1061 journals in.
1062 - journalctl: add the ability to look for the most recent process of a binary. journalctl /usr/bin/X11 --pid=-1 or so...
1063 - improve journalctl performance by loading journal files
1064 lazily. Encode just enough information in the file name, so that we
1065 do not have to open it to know that it is not interesting for us, for
1066 the most common operations.
1067 - man: document that corrupted journal files is nothing to act on
1068 - rework journald sigbus stuff to use mutex
1069 - Set RLIMIT_NPROC for systemd-journal-xyz, and all other of our
1070 services that run under their own user ids, and use User= (but only
1071 in a world where userns is ubiquitous since otherwise we cannot
1072 invoke those daemons on the host AND in a container anymore). Also,
1073 if LimitNPROC= is used without User= we should warn and refuse
1074 operation.
1075 - journalctl --verify: don't show files that are currently being
1076 written to as FAIL, but instead show that their are being written to.
1077 - add journalctl -H that talks via ssh to a remote peer and passes through
1078 binary logs data
1079 - add a version of --merge which also merges /var/log/journal/remote
1080 - journalctl: -m should access container journals directly by enumerating
1081 them via machined, and also watch containers coming and going.
1082 Benefit: nspawn --ephemeral would start working nicely with the journal.
1083 - assign MESSAGE_ID to log messages about failed services
1084 - check if loop in decompress_blob_xz() is necessary
1086 * add a test if all entries in the catalog are properly formatted.
1087 (Adding dashes in a catalog entry currently results in the catalog entry
1088 being silently skipped. journalctl --update-catalog must warn about this,
1089 and we should also have a unit test to check that all our message are OK.)
1091 * document:
1092 - document that deps in [Unit] sections ignore Alias= fields in
1093 [Install] units of other units, unless those units are disabled
1094 - man: clarify that is not only sysv compat but also useful otherwise. Same for similar targets
1095 - document that service reload may be implemented as service reexec
1096 - add a man page containing packaging guidelines and recommending usage of things like Documentation=, PrivateTmp=, PrivateNetwork= and ReadOnlyDirectories=/etc /usr.
1097 - document systemd-journal-flush.service properly
1098 - documentation: recommend to connect the timer units of a service to the service via Also= in [Install]
1099 - man: document the very specific env the shutdown drop-in tools live in
1100 - man: add more examples to man pages,
1101 - in particular an example how to do the equivalent of switching runlevels
1102 - man: maybe sort directives in man pages, and take sections from --help and apply them to man too
1103 - document root=gpt-auto properly
1105 * systemctl:
1106 - add systemctl switch to dump transaction without executing it
1107 - Add a verbose mode to "systemctl start" and friends that explains what is being done or not done
1108 - "systemctl disable" on a static unit prints no message and does
1109 nothing. "systemctl enable" does nothing, and gives a bad message
1110 about it. Should fix both to print nice actionable messages.
1111 - print nice message from systemctl --failed if there are no entries shown, and hook that into ExecStartPre of rescue.service/emergency.service
1112 - add new command to systemctl: "systemctl system-reexec" which reexecs as many daemons as virtually possible
1113 - systemctl enable: fail if target to alias into does not exist? maybe show how many units are enabled afterwards?
1114 - systemctl: "Journal has been rotated since unit was started." message is misleading
1115 - systemctl status output should include list of triggering units and their status
1117 * unit install:
1118 - "systemctl mask" should find all names by which a unit is accessible
1119 (i.e. by scanning for symlinks to it) and link them all to /dev/null
1121 * timer units:
1122 - timer units should get the ability to trigger when:
1123 o DST changes
1124 - Modulate timer frequency based on battery state
1126 * add libsystemd-password or so to query passwords during boot using the password agent logic
1128 * clean up date formatting and parsing so that all absolute/relative timestamps we format can also be parsed
1130 * on shutdown: move utmp, wall, audit logic all into PID 1 (or logind?), get rid of systemd-update-utmp-runlevel
1132 * make repeated alt-ctrl-del presses printing a dump
1134 * hostnamed: before returning information from /etc/machine-info.conf check the modification data and reread. Similar for localed, ...
1136 * currently x-systemd.timeout is lost in the initrd, since crypttab is copied into dracut, but fstab is not
1138 * nspawn:
1139 - emulate /dev/kmsg using CUSE and turn off the syslog syscall
1140 with seccomp. That should provide us with a useful log buffer that
1141 systemd can log to during early boot, and disconnect container logs
1142 from the kernel's logs.
1143 - as soon as networkd has a bus interface, hook up --network-interface=,
1144 --network-bridge= with networkd, to trigger netdev creation should an
1145 interface be missing
1146 - a nice way to boot up without machine id set, so that it is set at boot
1147 automatically for supporting --ephemeral. Maybe hash the host machine id
1148 together with the machine name to generate the machine id for the container
1149 - fix logic always print a final newline on output.
1151 - should optionally support receiving WATCHDOG=1 messages from its payload
1152 PID 1...
1153 - optionally automatically add FORWARD rules to iptables whenever nspawn is
1154 running, remove them when shut down.
1156 * dissect
1157 - refuse mounting over a mount point
1158 - automatically discover .roothash files in dissect, similarly to nspawn
1160 * machined:
1161 - add an API so that libvirt-lxc can inform us about network interfaces being
1162 removed or added to an existing machine
1163 - "machinectl migrate" or similar to copy a container from or to a
1164 difference host, via ssh
1165 - introduce systemd-nspawn-ephemeral@.service, and hook it into
1166 "machinectl start" with a new --ephemeral switch
1167 - "machinectl status" should also show internal logs of the container in
1168 question
1169 - "machinectl history"
1170 - "machinectl diff"
1171 - "machinectl commit" that takes a writable snapshot of a tree, invokes a
1172 shell in it, and marks it read-only after use
1174 * cryptsetup:
1175 - cryptsetup-generator: allow specification of passwords in crypttab itself
1176 - support rd.luks.allow-discards= kernel cmdline params in cryptsetup generator
1178 * hw watchdog: optionally try to use the preset watchdog timeout instead of always overriding it
1181 * add a dependency on standard-conf.xml and other included files to man pages
1183 * MountFlags=shared acts as MountFlags=slave right now.
1185 * properly handle loop back mounts via fstab, especially regards to fsck/passno
1187 * initialize the hostname from the fs label of /, if /etc/hostname does not exist?
1189 * udev:
1190 - move to LGPL
1191 - kill scsi_id
1192 - add trigger --subsystem-match=usb/usb_device device
1193 - reimport udev db after MOVE events for devices without dev_t
1195 * There's currently no way to cancel fsck (used to be possible via C-c or c on the console)
1197 * add option to sockets to avoid activation. Instead just drop packets/connections, see
1199 * coredump:
1200 - save coredump in Windows/Mozilla minidump format
1201 - when truncating coredumps, also log the full size that the process had, and make a metadata field so we can report truncated coredumps
1203 * support crash reporting operation modes (
1205 * be able to specify a forced restart of service A where service B depends on, in case B
1206 needs to be auto-respawned?
1208 * tmpfiles:
1209 - apply "x" on "D" too (see patch from William Douglas)
1210 - instead of ignoring unknown fields, reject them.
1211 - creating new directories/subvolumes/fifos/device nodes
1212 should not follow symlinks. None of the other adjustment or creation
1213 calls follow symlinks.
1215 * make sure systemd-ask-password-wall does not shutdown systemd-ask-password-console too early
1217 * verify that the AF_UNIX sockets of a service in the fs still exist
1218 when we start a service in order to avoid confusion when a user
1219 assumes starting a service is enough to make it accessible
1221 * Make it possible to set the keymap independently from the font on
1222 the kernel cmdline. Right now setting one resets also the other.
1224 * and a dbus call to generate target from current state
1226 * write blog stories about:
1227 - hwdb: what belongs into it, lsusb
1228 - enabling dbus services
1229 - how to make changes to sysctl and sysfs attributes
1230 - remote access
1231 - how to pass throw-away units to systemd, or dynamically change properties of existing units
1232 - testing with Harald's awesome test kit
1233 - auto-restart
1234 - how to develop against journal browsing APIs
1235 - the journal HTTP iface
1236 - non-cgroup resource management
1237 - dynamic resource management with cgroups
1238 - refreshed, longer missions statement
1239 - calendar time events
1240 - init=/bin/sh vs. "emergency" mode, vs. "rescue" mode, vs. "multi-user" mode, vs. "graphical" mode, and the debug shell
1241 - how to create your own target
1242 - instantiated apache, dovecot and so on
1243 - hooking a script into various stages of shutdown/rearly booot
1245 * investigate whether the gnome pty helper should be moved into systemd, to provide cgroup support.
1247 * dot output for --test showing the 'initial transaction'
1249 * pid1:
1250 - When logging about multiple units (stopping BoundTo units, conflicts, etc.),
1251 log both units as UNIT=, so that journalctl -u triggers on both.
1252 - generate better errors when people try to set transient properties
1253 that are not supported...
1255 - maybe introduce WantsMountsFor=? Usecase:
1257 - recreate systemd's D-Bus private socket file on SIGUSR2
1258 - move PAM code into its own binary
1259 - when we automatically restart a service, ensure we restart its rdeps, too.
1260 - hide PAM options in fragment parser when compile time disabled
1261 - Support --test based on current system state
1262 - If we show an error about a unit (such as not showing up) and it has no Description string, then show a description string generated form the reverse of unit_name_mangle().
1263 - after deserializing sockets in socket.c we should reapply sockopts and things
1264 - drop PID 1 reloading, only do reexecing (difficult: Reload()
1265 currently is properly synchronous, Reexec() is weird, because we
1266 cannot delay the response properly until we are back, so instead of
1267 being properly synchronous we just keep open the fd and close it
1268 when done. That means clients do not get a successful method reply,
1269 but much rather a disconnect on success.
1270 - when breaking cycles drop sysv services first, then services from /run, then from /etc, then from /usr
1271 - when a bus name of a service disappears from the bus make sure to queue further activation requests
1273 * unit files:
1274 - allow port=0 in .socket units
1275 - maybe introduce ExecRestartPre=
1276 - add ReloadSignal= for configuring a reload signal to use
1277 - implement Register= switch in .socket units to enable registration
1278 in Avahi, RPC and other socket registration services.
1279 - allow Type=simple with PIDFile=
1281 - allow writing multiple conditions in unit files on one line
1282 - introduce Type=pid-file
1283 - introduce mix of BindTo and Requisite
1284 - add a concept of RemainAfterExit= to scope units
1285 - Allow multiple ExecStart= for all Type= settings, so that we can cover rescue.service nicely
1286 - add verification of [Install] section to systemd-analyze verify
1288 * udev-link-config:
1289 - Make sure ID_PATH is always exported and complete for
1290 network devices where possible, so we can safely rely
1291 on Path= matching
1293 * sd-rtnl:
1294 - add support for more attribute types
1295 - inbuilt piping support (essentially degenerate async)? see loopback-setup.c and other places
1297 * networkd:
1298 - add more keys to [Route] and [Address] sections
1299 - add support for more DHCPv4 options (and, longer term, other kinds of dynamic config)
1300 - add reduced [Link] support to .network files
1301 - properly handle routerless dhcp leases
1302 - work with non-Ethernet devices
1303 - dhcp: do we allow configuring dhcp routes on interfaces that are not the one we got the dhcp info from?
1304 - the DHCP lease data (such as NTP/DNS) is still made available when
1305 a carrier is lost on a link. It should be removed instantly.
1306 - expose in the API the following bits:
1307 - option 15, domain name
1308 - option 12, hostname and/or option 81, fqdn
1309 - option 123, 144, geolocation
1310 - option 252, configure http proxy (PAC/wpad)
1311 - provide a way to define a per-network interface default metric value
1312 for all routes to it. possibly a second default for DHCP routes.
1313 - allow Name= to be specified repeatedly in the [Match] section. Maybe also
1314 support Name=foo*|bar*|baz ?
1315 - duplicate address check for static IPs (like ARPCHECK in network-scripts)
1316 - whenever uplink info changes, make DHCP server send out FORCERENEW
1318 * Figure out how to do unittests of networkd's state serialization
1320 * dhcp:
1321 - figure out how much we can increase Maximum Message Size
1323 * dhcp6:
1324 - add functions to set previously stored IPv6 addresses on startup and get
1325 them at shutdown; store them in client->ia_na
1326 - write more test cases
1327 - implement reconfigure support, see 5.3., 15.11. and 22.20.
1328 - implement support for temporary adressess (IA_TA)
1329 - implement dhcpv6 authentication
1330 - investigate the usefulness of Confirm messages; i.e. are there any
1331 situations where the link changes without any loss in carrier detection
1332 or interface down
1333 - some servers don't do rapid commit without a filled in IA_NA, verify
1334 this behavior
1335 - RouteTable= ?
1337 External:
1339 * dbus:
1340 - natively watch for dbus-*.service symlinks (PENDING)
1341 - teach dbus to activate all services it finds in /etc/systemd/services/org-*.service
1343 * make cryptsetup lower --iter-time
1345 * kernel: add device_type = "fb", "fbcon" to class "graphics"
1347 * /usr/bin/service should actually show the new command line
1349 * fedora: suggest auto-restart on failure, but not on success and not on coredump. also, ask people to think about changing the start limit logic. Also point people to RestartPreventExitStatus=, SuccessExitStatus=
1351 * neither pkexec nor sudo initialize environ[] from the PAM environment?
1353 * fedora: update policy to declare access mode and ownership of unit files to root:root 0644, and add an rpmlint check for it
1355 * register catalog database signature as file magic
1357 * zsh shell completion:
1358 - <command> <verb> -<TAB> should complete options, but currently does not
1359 - systemctl add-wants,add-requires
1361 * systemctl status should know about 'systemd-analyze calendar ... --iterations='
1362 * If timer has just OnInactiveSec=..., it should fire after a specified time
1363 after being started.
1365 Regularly:
1367 * look for close() vs. close_nointr() vs. close_nointr_nofail()
1369 * check for strerror(r) instead of strerror(-r)
1371 * pahole
1373 * set_put(), hashmap_put() return values check. i.e. == 0 does not free()!
1375 * use secure_getenv() instead of getenv() where appropriate
1377 * link up selected blog stories from man pages and unit files Documentation= fields
1378 String is not UTF-8 clean, ignoring assignment