2 <!DOCTYPE refentry PUBLIC
"-//OASIS//DTD DocBook XML V4.5//EN"
3 "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
4 <!-- SPDX-License-Identifier: LGPL-2.1+ -->
6 <refentry id=
"systemd.network" conditional='ENABLE_NETWORKD'
>
9 <title>systemd.network
</title>
10 <productname>systemd
</productname>
14 <refentrytitle>systemd.network
</refentrytitle>
15 <manvolnum>5</manvolnum>
19 <refname>systemd.network
</refname>
20 <refpurpose>Network configuration
</refpurpose>
24 <para><filename><replaceable>network
</replaceable>.network
</filename></para>
28 <title>Description
</title>
30 <para>Network setup is performed by
31 <citerefentry><refentrytitle>systemd-networkd
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
34 <para>The main network file must have the extension
<filename>.network
</filename>; other
35 extensions are ignored. Networks are applied to links whenever the links appear.
</para>
37 <para>The
<filename>.network
</filename> files are read from the files located in the system network
38 directories
<filename>/usr/lib/systemd/network
</filename> and
39 <filename>/usr/local/lib/systemd/network
</filename>, the volatile runtime network directory
40 <filename>/run/systemd/network
</filename> and the local administration network directory
41 <filename>/etc/systemd/network
</filename>. All configuration files are collectively sorted and processed
42 in lexical order, regardless of the directories in which they live. However, files with identical
43 filenames replace each other. Files in
<filename>/etc
</filename> have the highest priority, files in
44 <filename>/run
</filename> take precedence over files with the same name under
45 <filename>/usr
</filename>. This can be used to override a system-supplied configuration file with a local
46 file if needed. As a special case, an empty file (file size
0) or symlink with the same name pointing to
47 <filename>/dev/null
</filename> disables the configuration file entirely (it is
"masked").
</para>
49 <para>Along with the network file
<filename>foo.network
</filename>, a
"drop-in" directory
50 <filename>foo.network.d/
</filename> may exist. All files with the suffix
51 <literal>.conf
</literal> from this directory will be parsed after the file itself is
52 parsed. This is useful to alter or add configuration settings, without having to modify the main
53 configuration file. Each drop-in file must have appropriate section headers.
</para>
55 <para>In addition to
<filename>/etc/systemd/network
</filename>, drop-in
<literal>.d
</literal>
56 directories can be placed in
<filename>/usr/lib/systemd/network
</filename> or
57 <filename>/run/systemd/network
</filename> directories. Drop-in files in
58 <filename>/etc
</filename> take precedence over those in
<filename>/run
</filename> which in turn
59 take precedence over those in
<filename>/usr/lib
</filename>. Drop-in files under any of these
60 directories take precedence over the main netdev file wherever located.
</para>
62 <para>Note that an interface without any static IPv6 addresses configured, and neither DHCPv6
63 nor IPv6LL enabled, shall be considered to have no IPv6 support. IPv6 will be automatically
64 disabled for that interface by writing
"1" to
65 <filename>/proc/sys/net/ipv6/conf/
<replaceable>ifname
</replaceable>/disable_ipv6
</filename>.
70 <title>[Match] Section Options
</title>
72 <para>The network file contains a
<literal>[Match]
</literal>
73 section, which determines if a given network file may be applied
74 to a given device; and a
<literal>[Network]
</literal> section
75 specifying how the device should be configured. The first (in
76 lexical order) of the network files that matches a given device
77 is applied, all later files are ignored, even if they match as
80 <para>A network file is said to match a network interface if all matches specified by the
81 <literal>[Match]
</literal> section are satisfied. When a network file does not contain valid
82 settings in
<literal>[Match]
</literal> section, then the file will match all interfaces and
83 <command>systemd-networkd
</command> warns about that. Hint: to avoid the warning and to make it
84 clear that all interfaces shall be matched, add the following:
85 <programlisting>Name=*
</programlisting>
86 The following keys are accepted:
</para>
88 <variablelist class='network-directives'
>
90 <term><varname>MACAddress=
</varname></term>
92 <para>A whitespace-separated list of hardware addresses. Use full colon-, hyphen- or dot-delimited hexadecimal. See the example below.
93 This option may appear more than one, in which case the lists are merged. If the empty string is assigned to this option, the list
94 of hardware addresses defined prior to this is reset.
</para>
97 <programlisting>MACAddress=
01:
23:
45:
67:
89:ab
00-
11-
22-
33-
44-
55 AABB.CCDD.EEFF
</programlisting></para>
101 <term><varname>Path=
</varname></term>
103 <para>A whitespace-separated list of shell-style globs
104 matching the persistent path, as exposed by the udev
105 property
<literal>ID_PATH
</literal>. If the list is
106 prefixed with a
"!", the test is inverted; i.e. it is
107 true when
<literal>ID_PATH
</literal> does not match any
108 item in the list.
</para>
112 <term><varname>Driver=
</varname></term>
114 <para>A whitespace-separated list of shell-style globs
115 matching the driver currently bound to the device, as
116 exposed by the udev property
<literal>ID_NET_DRIVER
</literal>
117 of its parent device, or if that is not set the driver
118 as exposed by
<literal>ethtool -i
</literal> of the
119 device itself. If the list is prefixed with a
"!", the
120 test is inverted.
</para>
124 <term><varname>Type=
</varname></term>
126 <para>A whitespace-separated list of shell-style globs
127 matching the device type, as exposed by the udev property
128 <literal>DEVTYPE
</literal>. If the list is prefixed with
129 a
"!", the test is inverted.
</para>
133 <term><varname>Name=
</varname></term>
135 <para>A whitespace-separated list of shell-style globs
136 matching the device name, as exposed by the udev property
137 <literal>INTERFACE
</literal>. If the list is prefixed
138 with a
"!", the test is inverted.
</para>
142 <term><varname>Property=
</varname></term>
144 <para>A whitespace-separated list of udev property name with its value after a equal
145 (
<literal>=
</literal>). If multiple properties are specified, the test results are ANDed.
146 If the list is prefixed with a
"!", the test is inverted. If a value contains white
147 spaces, then please quote whole key and value pair. If a value contains quotation, then
148 please escape the quotation with
<literal>\
</literal>.
</para>
150 <para>Example: if a .network file has the following:
151 <programlisting>Property=ID_MODEL_ID=
9999 "ID_VENDOR_FROM_DATABASE=vendor name" "KEY=with \"quotation\
""</programlisting>
152 then, the .network file matches only when an interface has all the above three properties.
157 <term><varname>Host=
</varname></term>
159 <para>Matches against the hostname or machine ID of the host. See
160 <literal>ConditionHost=
</literal> in
161 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
162 for details. When prefixed with an exclamation mark (
<literal>!
</literal>), the result is negated.
163 If an empty string is assigned, then previously assigned value is cleared.
168 <term><varname>Virtualization=
</varname></term>
170 <para>Checks whether the system is executed in a virtualized environment and optionally test
171 whether it is a specific implementation. See
<literal>ConditionVirtualization=
</literal> in
172 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
173 for details. When prefixed with an exclamation mark (
<literal>!
</literal>), the result is negated.
174 If an empty string is assigned, then previously assigned value is cleared.
179 <term><varname>KernelCommandLine=
</varname></term>
181 <para>Checks whether a specific kernel command line option is set. See
182 <literal>ConditionKernelCommandLine=
</literal> in
183 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
184 for details. When prefixed with an exclamation mark (
<literal>!
</literal>), the result is negated.
185 If an empty string is assigned, then previously assigned value is cleared.
190 <term><varname>KernelVersion=
</varname></term>
192 <para>Checks whether the kernel version (as reported by
<command>uname -r
</command>) matches a
193 certain expression. See
<literal>ConditionKernelVersion=
</literal> in
194 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
195 for details. When prefixed with an exclamation mark (
<literal>!
</literal>), the result is negated.
196 If an empty string is assigned, then previously assigned value is cleared.
201 <term><varname>Architecture=
</varname></term>
203 <para>Checks whether the system is running on a specific architecture. See
204 <literal>ConditionArchitecture=
</literal> in
205 <citerefentry><refentrytitle>systemd.unit
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
206 for details. When prefixed with an exclamation mark (
<literal>!
</literal>), the result is negated.
207 If an empty string is assigned, then previously assigned value is cleared.
216 <title>[Link] Section Options
</title>
218 <para> The
<literal>[Link]
</literal> section accepts the following keys:
</para>
220 <variablelist class='network-directives'
>
222 <term><varname>MACAddress=
</varname></term>
224 <para>The hardware address to set for the device.
</para>
228 <term><varname>MTUBytes=
</varname></term>
230 <para>The maximum transmission unit in bytes to set for the
231 device. The usual suffixes K, M, G, are supported and are
232 understood to the base of
1024.
</para>
233 <para>Note that if IPv6 is enabled on the interface, and the MTU is chosen
234 below
1280 (the minimum MTU for IPv6) it will automatically be increased to this value.
</para>
238 <term><varname>ARP=
</varname></term>
240 <para>Takes a boolean. If set to true, the ARP (low-level Address Resolution Protocol)
241 for this interface is enabled. When unset, the kernel's default will be used.
</para>
242 <para> For example, disabling ARP is useful when creating multiple MACVLAN or VLAN virtual
243 interfaces atop a single lower-level physical interface, which will then only serve as a
244 link/
"bridge" device aggregating traffic to the same physical link and not participate in
245 the network otherwise.
</para>
249 <term><varname>Multicast=
</varname></term>
251 <para>Takes a boolean. If set to true, the multicast flag on the device is enabled.
</para>
255 <term><varname>AllMulticast=
</varname></term>
257 <para>Takes a boolean. If set to true, the driver retrieves all multicast packets from the network.
258 This happens when multicast routing is enabled.
</para>
262 <term><varname>Unmanaged=
</varname></term>
264 <para>Takes a boolean. When
<literal>yes
</literal>, no attempts are
265 made to bring up or configure matching links, equivalent to
266 when there are no matching network files. Defaults to
267 <literal>no
</literal>.
</para>
268 <para>This is useful for preventing later matching network
269 files from interfering with certain interfaces that are fully
270 controlled by other applications.
</para>
274 <term><varname>RequiredForOnline=
</varname></term>
276 <para>Takes a boolean or operational state. Please see
277 <citerefentry><refentrytitle>networkctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry>
278 for possible operational states. When
<literal>yes
</literal>, the network is deemed required when
279 determining whether the system is online when running
280 <command>systemd-networkd-wait-online
</command>. When
<literal>no
</literal>, the network is ignored
281 when checking for online state. When an operational state is set,
<literal>yes
</literal> is implied,
282 and this controls the operational state required for the network interface to be considered online.
283 Defaults to
<literal>yes
</literal>.
</para>
285 <para>The network will be brought up normally in all cases, but in
286 the event that there is no address being assigned by DHCP or the
287 cable is not plugged in, the link will simply remain offline and be
288 skipped automatically by
<command>systemd-networkd-wait-online
</command>
289 if
<literal>RequiredForOnline=no
</literal>.
</para>
296 <title>[Network] Section Options
</title>
298 <para>The
<literal>[Network]
</literal> section accepts the following keys:
</para>
300 <variablelist class='network-directives'
>
302 <term><varname>Description=
</varname></term>
304 <para>A description of the device. This is only used for
305 presentation purposes.
</para>
309 <term><varname>DHCP=
</varname></term>
311 <para>Enables DHCPv4 and/or DHCPv6 client support. Accepts
312 <literal>yes
</literal>,
<literal>no
</literal>,
313 <literal>ipv4
</literal>, or
<literal>ipv6
</literal>. Defaults
314 to
<literal>no
</literal>.
</para>
316 <para>Note that DHCPv6 will by default be triggered by Router
317 Advertisement, if that is enabled, regardless of this parameter.
318 By enabling DHCPv6 support explicitly, the DHCPv6 client will
319 be started regardless of the presence of routers on the link,
320 or what flags the routers pass. See
321 <literal>IPv6AcceptRA=
</literal>.
</para>
323 <para>Furthermore, note that by default the domain name
324 specified through DHCP is not used for name resolution.
325 See option
<option>UseDomains=
</option> below.
</para>
327 <para>See the
<literal>[DHCPv4]
</literal> or
<literal>[DHCPv6]
</literal> section below for
328 further configuration options for the DHCP client support.
</para>
332 <term><varname>DHCPServer=
</varname></term>
334 <para>Takes a boolean. If set to
<literal>yes
</literal>, DHCPv4 server will be started. Defaults
335 to
<literal>no
</literal>. Further settings for the DHCP
336 server may be set in the
<literal>[DHCPServer]
</literal>
337 section described below.
</para>
341 <term><varname>LinkLocalAddressing=
</varname></term>
343 <para>Enables link-local address autoconfiguration. Accepts
<literal>yes
</literal>,
344 <literal>no
</literal>,
<literal>ipv4
</literal>,
<literal>ipv6
</literal>,
345 <literal>fallback
</literal>, or
<literal>ipv4-fallback
</literal>. If
346 <literal>fallback
</literal> or
<literal>ipv4-fallback
</literal> is specified, then an IPv4
347 link-local address is configured only when DHCPv4 fails. If
<literal>fallback
</literal>,
348 an IPv6 link-local address is always configured, and if
<literal>ipv4-fallback
</literal>,
349 the address is not configured. Note that, the fallback mechanism works only when DHCPv4
350 client is enabled, that is, it requires
<literal>DHCP=yes
</literal> or
351 <literal>DHCP=ipv4
</literal>. If
<varname>Bridge=
</varname> is set, defaults to
352 <literal>no
</literal>, and if not, defaults to
<literal>ipv6
</literal>.
357 <term><varname>IPv4LLRoute=
</varname></term>
359 <para>Takes a boolean. If set to true, sets up the route needed for
360 non-IPv4LL hosts to communicate with IPv4LL-only hosts. Defaults
366 <term><varname>DefaultRouteOnDevice=
</varname></term>
368 <para>Takes a boolean. If set to true, sets up the default route bound to the interface.
369 Defaults to false. This is useful when creating routes on point-to-point interfaces.
370 This is equivalent to e.g. the following.
371 <programlisting>ip route add default dev veth99
</programlisting></para>
375 <term><varname>IPv6Token=
</varname></term>
377 <para>An IPv6 address with the top
64 bits unset. When set, indicates the
378 64-bit interface part of SLAAC IPv6 addresses for this link. Note that
379 the token is only ever used for SLAAC, and not for DHCPv6 addresses, even
380 in the case DHCP is requested by router advertisement. By default, the
381 token is autogenerated.
</para>
385 <term><varname>LLMNR=
</varname></term>
387 <para>Takes a boolean or
<literal>resolve
</literal>. When true,
389 url=
"https://tools.ietf.org/html/rfc4795">Link-Local
390 Multicast Name Resolution
</ulink> on the link. When set to
391 <literal>resolve
</literal>, only resolution is enabled,
392 but not host registration and announcement. Defaults to
393 true. This setting is read by
394 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
398 <term><varname>MulticastDNS=
</varname></term>
400 <para>Takes a boolean or
<literal>resolve
</literal>. When true,
402 url=
"https://tools.ietf.org/html/rfc6762">Multicast
403 DNS
</ulink> support on the link. When set to
404 <literal>resolve
</literal>, only resolution is enabled,
405 but not host or service registration and
406 announcement. Defaults to false. This setting is read by
407 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
411 <term><varname>DNSOverTLS=
</varname></term>
413 <para>Takes a boolean or
<literal>opportunistic
</literal>.
416 url=
"https://tools.ietf.org/html/rfc7858">DNS-over-TLS
</ulink>
418 When set to
<literal>opportunistic
</literal>, compatibility with
419 non-DNS-over-TLS servers is increased, by automatically
420 turning off DNS-over-TLS servers in this case.
421 This option defines a per-interface setting for
422 <citerefentry><refentrytitle>resolved.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>'s
423 global
<varname>DNSOverTLS=
</varname> option. Defaults to
424 false. This setting is read by
425 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
429 <term><varname>DNSSEC=
</varname></term>
431 <para>Takes a boolean. or
432 <literal>allow-downgrade
</literal>. When true, enables
434 url=
"https://tools.ietf.org/html/rfc4033">DNSSEC
</ulink>
435 DNS validation support on the link. When set to
436 <literal>allow-downgrade
</literal>, compatibility with
437 non-DNSSEC capable networks is increased, by automatically
438 turning off DNSSEC in this case. This option defines a
439 per-interface setting for
440 <citerefentry><refentrytitle>resolved.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>'s
441 global
<varname>DNSSEC=
</varname> option. Defaults to
442 false. This setting is read by
443 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
447 <term><varname>DNSSECNegativeTrustAnchors=
</varname></term>
448 <listitem><para>A space-separated list of DNSSEC negative
449 trust anchor domains. If specified and DNSSEC is enabled,
450 look-ups done via the interface's DNS server will be subject
451 to the list of negative trust anchors, and not require
452 authentication for the specified domains, or anything below
453 it. Use this to disable DNSSEC authentication for specific
454 private domains, that cannot be proven valid using the
455 Internet DNS hierarchy. Defaults to the empty list. This
457 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
461 <term><varname>LLDP=
</varname></term>
463 <para>Controls support for Ethernet LLDP packet reception. LLDP is a link-layer protocol commonly
464 implemented on professional routers and bridges which announces which physical port a system is connected
465 to, as well as other related data. Accepts a boolean or the special value
466 <literal>routers-only
</literal>. When true, incoming LLDP packets are accepted and a database of all LLDP
467 neighbors maintained. If
<literal>routers-only
</literal> is set only LLDP data of various types of routers
468 is collected and LLDP data about other types of devices ignored (such as stations, telephones and
469 others). If false, LLDP reception is disabled. Defaults to
<literal>routers-only
</literal>. Use
470 <citerefentry><refentrytitle>networkctl
</refentrytitle><manvolnum>1</manvolnum></citerefentry> to query the
471 collected neighbor data. LLDP is only available on Ethernet links. See
<varname>EmitLLDP=
</varname> below
472 for enabling LLDP packet emission from the local system.
477 <term><varname>EmitLLDP=
</varname></term>
479 <para>Controls support for Ethernet LLDP packet emission. Accepts a boolean parameter or the special values
480 <literal>nearest-bridge
</literal>,
<literal>non-tpmr-bridge
</literal> and
481 <literal>customer-bridge
</literal>. Defaults to false, which turns off LLDP packet emission. If not false,
482 a short LLDP packet with information about the local system is sent out in regular intervals on the
483 link. The LLDP packet will contain information about the local host name, the local machine ID (as stored
484 in
<citerefentry><refentrytitle>machine-id
</refentrytitle><manvolnum>5</manvolnum></citerefentry>) and the
485 local interface name, as well as the pretty hostname of the system (as set in
486 <citerefentry><refentrytitle>machine-info
</refentrytitle><manvolnum>5</manvolnum></citerefentry>). LLDP
487 emission is only available on Ethernet links. Note that this setting passes data suitable for
488 identification of host to the network and should thus not be enabled on untrusted networks, where such
489 identification data should not be made available. Use this option to permit other systems to identify on
490 which interfaces they are connected to this system. The three special values control propagation of the
491 LLDP packets. The
<literal>nearest-bridge
</literal> setting permits propagation only to the nearest
492 connected bridge,
<literal>non-tpmr-bridge
</literal> permits propagation across Two-Port MAC Relays, but
493 not any other bridges, and
<literal>customer-bridge
</literal> permits propagation until a customer bridge
494 is reached. For details about these concepts, see
<ulink
495 url=
"https://standards.ieee.org/findstds/standard/802.1AB-2016.html">IEEE
802.1AB-
2016</ulink>. Note that
496 configuring this setting to true is equivalent to
<literal>nearest-bridge
</literal>, the recommended and
497 most restricted level of propagation. See
<varname>LLDP=
</varname> above for an option to enable LLDP
502 <term><varname>BindCarrier=
</varname></term>
504 <para>A link name or a list of link names. When set, controls the behavior of the current
505 link. When all links in the list are in an operational down state, the current link is brought
506 down. When at least one link has carrier, the current interface is brought up.
511 <term><varname>Address=
</varname></term>
513 <para>A static IPv4 or IPv6 address and its prefix length,
514 separated by a
<literal>/
</literal> character. Specify
515 this key more than once to configure several addresses.
516 The format of the address must be as described in
517 <citerefentry project='man-pages'
><refentrytitle>inet_pton
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
518 This is a short-hand for an [Address] section only
519 containing an Address key (see below). This option may be
520 specified more than once.
523 <para>If the specified address is
<literal>0.0.0.0</literal> (for IPv4) or
<literal>::
</literal>
524 (for IPv6), a new address range of the requested size is automatically allocated from a
525 system-wide pool of unused ranges. Note that the prefix length must be equal or larger than
8 for
526 IPv4, and
64 for IPv6. The allocated range is checked against all current network interfaces and
527 all known network configuration files to avoid address range conflicts. The default system-wide
528 pool consists of
192.168.0.0/
16,
172.16.0.0/
12 and
10.0.0.0/
8 for IPv4, and fd00::/
8 for IPv6.
529 This functionality is useful to manage a large number of dynamically created network interfaces
530 with the same network configuration and automatic address range assignment.
</para>
535 <term><varname>Gateway=
</varname></term>
537 <para>The gateway address, which must be in the format
539 <citerefentry project='man-pages'
><refentrytitle>inet_pton
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
540 This is a short-hand for a [Route] section only containing
541 a Gateway key. This option may be specified more than
546 <term><varname>DNS=
</varname></term>
548 <para>A DNS server address, which must be in the format
550 <citerefentry project='man-pages'
><refentrytitle>inet_pton
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
551 This option may be specified more than once. This setting is read by
552 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
556 <term><varname>Domains=
</varname></term>
558 <para>A list of domains which should be resolved using the DNS servers on this link. Each item in the list
559 should be a domain name, optionally prefixed with a tilde (
<literal>~
</literal>). The domains with the
560 prefix are called
"routing-only domains". The domains without the prefix are called
"search domains" and
561 are first used as search suffixes for extending single-label host names (host names containing no dots) to
562 become fully qualified domain names (FQDNs). If a single-label host name is resolved on this interface,
563 each of the specified search domains are appended to it in turn, converting it into a fully qualified
564 domain name, until one of them may be successfully resolved.
</para>
566 <para>Both
"search" and
"routing-only" domains are used for routing of DNS queries: look-ups for host names
567 ending in those domains (hence also single label names, if any
"search domains" are listed), are routed to
568 the DNS servers configured for this interface. The domain routing logic is particularly useful on
569 multi-homed hosts with DNS servers serving particular private DNS zones on each interface.
</para>
571 <para>The
"routing-only" domain
<literal>~.
</literal> (the tilde indicating definition of a routing domain,
572 the dot referring to the DNS root domain which is the implied suffix of all valid DNS names) has special
573 effect. It causes all DNS traffic which does not match another configured domain routing entry to be routed
574 to DNS servers specified for this interface. This setting is useful to prefer a certain set of DNS servers
575 if a link on which they are connected is available.
</para>
577 <para>This setting is read by
578 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
579 "Search domains" correspond to the
<varname>domain
</varname> and
<varname>search
</varname> entries in
580 <citerefentry project='man-pages'
><refentrytitle>resolv.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
581 Domain name routing has no equivalent in the traditional glibc API, which has no concept of domain
582 name servers limited to a specific link.
</para>
586 <term><varname>DNSDefaultRoute=
</varname></term>
588 <para>Takes a boolean argument. If true, this link's configured DNS servers are used for resolving domain
589 names that do not match any link's configured
<varname>Domains=
</varname> setting. If false, this link's
590 configured DNS servers are never used for such domains, and are exclusively used for resolving names that
591 match at least one of the domains configured on this link. If not specified defaults to an automatic mode:
592 queries not matching any link's configured domains will be routed to this link if it has no routing-only
593 domains configured.
</para>
597 <term><varname>NTP=
</varname></term>
599 <para>An NTP server address. This option may be specified more than once. This setting is read by
600 <citerefentry><refentrytitle>systemd-timesyncd.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
604 <term><varname>IPForward=
</varname></term>
605 <listitem><para>Configures IP packet forwarding for the
606 system. If enabled, incoming packets on any network
607 interface will be forwarded to any other interfaces
608 according to the routing table. Takes a boolean,
609 or the values
<literal>ipv4
</literal> or
610 <literal>ipv6
</literal>, which only enable IP packet
611 forwarding for the specified address family. This controls
612 the
<filename>net.ipv4.ip_forward
</filename> and
613 <filename>net.ipv6.conf.all.forwarding
</filename> sysctl
614 options of the network interface (see
<ulink
615 url=
"https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt">ip-sysctl.txt
</ulink>
616 for details about sysctl options). Defaults to
617 <literal>no
</literal>.
</para>
619 <para>Note: this setting controls a global kernel option,
620 and does so one way only: if a network that has this setting
621 enabled is set up the global setting is turned on. However,
622 it is never turned off again, even after all networks with
623 this setting enabled are shut down again.
</para>
625 <para>To allow IP packet forwarding only between specific
626 network interfaces use a firewall.
</para>
630 <term><varname>IPMasquerade=
</varname></term>
631 <listitem><para>Configures IP masquerading for the network
632 interface. If enabled, packets forwarded from the network
633 interface will be appear as coming from the local host.
634 Takes a boolean argument. Implies
635 <varname>IPForward=ipv4
</varname>. Defaults to
636 <literal>no
</literal>.
</para></listitem>
639 <term><varname>IPv6PrivacyExtensions=
</varname></term>
640 <listitem><para>Configures use of stateless temporary
641 addresses that change over time (see
<ulink
642 url=
"https://tools.ietf.org/html/rfc4941">RFC
4941</ulink>,
643 Privacy Extensions for Stateless Address Autoconfiguration
644 in IPv6). Takes a boolean or the special values
645 <literal>prefer-public
</literal> and
646 <literal>kernel
</literal>. When true, enables the privacy
647 extensions and prefers temporary addresses over public
648 addresses. When
<literal>prefer-public
</literal>, enables the
649 privacy extensions, but prefers public addresses over
650 temporary addresses. When false, the privacy extensions
651 remain disabled. When
<literal>kernel
</literal>, the kernel's
652 default setting will be left in place. Defaults to
653 <literal>no
</literal>.
</para></listitem>
656 <term><varname>IPv6AcceptRA=
</varname></term>
657 <listitem><para>Takes a boolean. Controls IPv6 Router Advertisement (RA) reception support
658 for the interface. If true, RAs are accepted; if false, RAs are ignored, independently of the
659 local forwarding state. When RAs are accepted, they may trigger the start of the DHCPv6
660 client if the relevant flags are set in the RA data, or if no routers are found on the link.
</para>
662 <para>Further settings for the IPv6 RA support may be configured in the
663 <literal>[IPv6AcceptRA]
</literal> section, see below.
</para>
665 <para>Also see
<ulink
666 url=
"https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt">ip-sysctl.txt
</ulink> in the kernel
667 documentation regarding
<literal>accept_ra
</literal>, but note that systemd's setting of
668 <constant>1</constant> (i.e. true) corresponds to kernel's setting of
<constant>2</constant>.
</para>
670 <para>Note that kernel's implementation of the IPv6 RA protocol is always disabled,
671 regardless of this setting. If this option is enabled, a userspace implementation of the IPv6
672 RA protocol is used, and the kernel's own implementation remains disabled, since
673 <command>systemd-networkd
</command> needs to know all details supplied in the advertisements,
674 and these are not available from the kernel if the kernel's own implementation is used.
</para>
678 <term><varname>IPv6DuplicateAddressDetection=
</varname></term>
679 <listitem><para>Configures the amount of IPv6 Duplicate
680 Address Detection (DAD) probes to send. When unset, the kernel's default will be used.
684 <term><varname>IPv6HopLimit=
</varname></term>
685 <listitem><para>Configures IPv6 Hop Limit. For each router that
686 forwards the packet, the hop limit is decremented by
1. When the
687 hop limit field reaches zero, the packet is discarded.
688 When unset, the kernel's default will be used.
692 <term><varname>IPv4ProxyARP=
</varname></term>
693 <listitem><para>Takes a boolean. Configures proxy ARP for IPv4. Proxy ARP is the technique in which one host,
694 usually a router, answers ARP requests intended for another machine. By
"faking" its identity,
695 the router accepts responsibility for routing packets to the
"real" destination. (see
<ulink
696 url=
"https://tools.ietf.org/html/rfc1027">RFC
1027</ulink>.
697 When unset, the kernel's default will be used.
701 <term><varname>IPv6ProxyNDP=
</varname></term>
702 <listitem><para>Takes a boolean. Configures proxy NDP for IPv6. Proxy NDP (Neighbor Discovery
703 Protocol) is a technique for IPv6 to allow routing of addresses to a different
704 destination when peers expect them to be present on a certain physical link.
705 In this case a router answers Neighbour Advertisement messages intended for
706 another machine by offering its own MAC address as destination.
707 Unlike proxy ARP for IPv4, it is not enabled globally, but will only send Neighbour
708 Advertisement messages for addresses in the IPv6 neighbor proxy table,
709 which can also be shown by
<command>ip -
6 neighbour show proxy
</command>.
710 systemd-networkd will control the per-interface `proxy_ndp` switch for each configured
711 interface depending on this option.
712 When unset, the kernel's default will be used.
716 <term><varname>IPv6ProxyNDPAddress=
</varname></term>
717 <listitem><para>An IPv6 address, for which Neighbour Advertisement messages will be
718 proxied. This option may be specified more than once. systemd-networkd will add the
719 <option>IPv6ProxyNDPAddress=
</option> entries to the kernel's IPv6 neighbor proxy table.
720 This option implies
<option>IPv6ProxyNDP=yes
</option> but has no effect if
721 <option>IPv6ProxyNDP
</option> has been set to false. When unset, the kernel's default will be used.
725 <term><varname>IPv6PrefixDelegation=
</varname></term>
726 <listitem><para>Whether to enable or disable Router Advertisement sending on a link.
727 Allowed values are
<literal>static
</literal> which distributes prefixes as defined in
728 the
<literal>[IPv6PrefixDelegation]
</literal> and any
<literal>[IPv6Prefix]
</literal>
729 sections,
<literal>dhcpv6
</literal> which requests prefixes using a DHCPv6 client
730 configured for another link and any values configured in the
731 <literal>[IPv6PrefixDelegation]
</literal> section while ignoring all static prefix
732 configuration sections,
<literal>yes
</literal> which uses both static configuration
733 and DHCPv6, and
<literal>false
</literal> which turns off IPv6 prefix delegation
734 altogether. Defaults to
<literal>false
</literal>. See the
735 <literal>[IPv6PrefixDelegation]
</literal> and the
<literal>[IPv6Prefix]
</literal>
736 sections for more configuration options.
740 <term><varname>IPv6MTUBytes=
</varname></term>
741 <listitem><para>Configures IPv6 maximum transmission unit (MTU).
742 An integer greater than or equal to
1280 bytes. When unset, the kernel's default will be used.
746 <term><varname>Bridge=
</varname></term>
748 <para>The name of the bridge to add the link to. See
749 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
754 <term><varname>Bond=
</varname></term>
756 <para>The name of the bond to add the link to. See
757 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
762 <term><varname>VRF=
</varname></term>
764 <para>The name of the VRF to add the link to. See
765 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
770 <term><varname>VLAN=
</varname></term>
772 <para>The name of a VLAN to create on the link. See
773 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
774 This option may be specified more than once.
</para>
778 <term><varname>IPVLAN=
</varname></term>
780 <para>The name of a IPVLAN to create on the link. See
781 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
782 This option may be specified more than once.
</para>
786 <term><varname>MACVLAN=
</varname></term>
788 <para>The name of a MACVLAN to create on the link. See
789 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
790 This option may be specified more than once.
</para>
794 <term><varname>VXLAN=
</varname></term>
796 <para>The name of a VXLAN to create on the link. See
797 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
798 This option may be specified more than once.
</para>
802 <term><varname>Tunnel=
</varname></term>
804 <para>The name of a Tunnel to create on the link. See
805 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
806 This option may be specified more than once.
</para>
810 <term><varname>MACsec=
</varname></term>
812 <para>The name of a MACsec device to create on the link. See
813 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
814 This option may be specified more than once.
</para>
818 <term><varname>ActiveSlave=
</varname></term>
820 <para>Takes a boolean. Specifies the new active slave. The
<literal>ActiveSlave=
</literal>
821 option is only valid for following modes:
822 <literal>active-backup
</literal>,
823 <literal>balance-alb
</literal> and
824 <literal>balance-tlb
</literal>. Defaults to false.
829 <term><varname>PrimarySlave=
</varname></term>
831 <para>Takes a boolean. Specifies which slave is the primary device. The specified
832 device will always be the active slave while it is available. Only when the
833 primary is off-line will alternate devices be used. This is useful when
834 one slave is preferred over another, e.g. when one slave has higher throughput
835 than another. The
<literal>PrimarySlave=
</literal> option is only valid for
837 <literal>active-backup
</literal>,
838 <literal>balance-alb
</literal> and
839 <literal>balance-tlb
</literal>. Defaults to false.
844 <term><varname>ConfigureWithoutCarrier=
</varname></term>
846 <para>Takes a boolean. Allows networkd to configure a specific link even if it has no carrier.
852 <term><varname>IgnoreCarrierLoss=
</varname></term>
854 <para>A boolean. Allows networkd to retain both the static and dynamic configuration of the
855 interface even if its carrier is lost. Defaults to false.
860 <term><varname>Xfrm=
</varname></term>
862 <para>The name of the xfrm to create on the link. See
863 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
864 This option may be specified more than once.
</para>
868 <term><varname>KeepConfiguration=
</varname></term>
870 <para>Takes a boolean or one of
<literal>static
</literal>,
<literal>dhcp-on-stop
</literal>,
871 <literal>dhcp
</literal>. When
<literal>static
</literal>,
<command>systemd-networkd
</command>
872 will not drop static addresses and routes on starting up process. When set to
873 <literal>dhcp-on-stop
</literal>,
<command>systemd-networkd
</command> will not drop addresses
874 and routes on stopping the daemon. When
<literal>dhcp
</literal>,
875 the addresses and routes provided by a DHCP server will never be dropped even if the DHCP
876 lease expires. This is contrary to the DHCP specification, but may be the best choice if,
877 e.g., the root filesystem relies on this connection. The setting
<literal>dhcp
</literal>
878 implies
<literal>dhcp-on-stop
</literal>, and
<literal>yes
</literal> implies
879 <literal>dhcp
</literal> and
<literal>static
</literal>. Defaults to
880 <literal>dhcp-on-stop
</literal>.
</para>
889 <title>[Address] Section Options
</title>
891 <para>An
<literal>[Address]
</literal> section accepts the
892 following keys. Specify several
<literal>[Address]
</literal>
893 sections to configure several addresses.
</para>
895 <variablelist class='network-directives'
>
897 <term><varname>Address=
</varname></term>
899 <para>As in the
<literal>[Network]
</literal> section. This key is mandatory. Each
900 <literal>[Address]
</literal> section can contain one
<varname>Address=
</varname> setting.
</para>
904 <term><varname>Peer=
</varname></term>
906 <para>The peer address in a point-to-point connection.
907 Accepts the same format as the
<varname>Address=
</varname>
912 <term><varname>Broadcast=
</varname></term>
914 <para>The broadcast address, which must be in the format
916 <citerefentry project='man-pages'
><refentrytitle>inet_pton
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
917 This key only applies to IPv4 addresses. If it is not
918 given, it is derived from the
<varname>Address=
</varname>
923 <term><varname>Label=
</varname></term>
925 <para>An address label.
</para>
929 <term><varname>PreferredLifetime=
</varname></term>
931 <para>Allows the default
"preferred lifetime" of the address to be overridden.
932 Only three settings are accepted:
<literal>forever
</literal> or
<literal>infinity
</literal>
933 which is the default and means that the address never expires, and
<literal>0</literal> which means
934 that the address is considered immediately
"expired" and will not be used,
935 unless explicitly requested. A setting of PreferredLifetime=
0 is useful for
936 addresses which are added to be used only by a specific application,
937 which is then configured to use them explicitly.
</para>
941 <term><varname>Scope=
</varname></term>
943 <para>The scope of the address, which can be
<literal>global
</literal>,
944 <literal>link
</literal> or
<literal>host
</literal> or an unsigned integer ranges
0 to
255.
945 Defaults to
<literal>global
</literal>.
</para>
949 <term><varname>HomeAddress=
</varname></term>
951 <para>Takes a boolean. Designates this address the
"home address" as defined in
952 <ulink url=
"https://tools.ietf.org/html/rfc6275">RFC
6275</ulink>.
953 Supported only on IPv6. Defaults to false.
</para>
957 <term><varname>DuplicateAddressDetection=
</varname></term>
959 <para>Takes a boolean. Do not perform Duplicate Address Detection
960 <ulink url=
"https://tools.ietf.org/html/rfc4862">RFC
4862</ulink> when adding this address.
961 Supported only on IPv6. Defaults to false.
</para>
965 <term><varname>ManageTemporaryAddress=
</varname></term>
967 <para>Takes a boolean. If true the kernel manage temporary addresses created
968 from this one as template on behalf of Privacy Extensions
969 <ulink url=
"https://tools.ietf.org/html/rfc3041">RFC
3041</ulink>. For this to become
970 active, the use_tempaddr sysctl setting has to be set to a value greater than zero.
971 The given address needs to have a prefix length of
64. This flag allows to use privacy
972 extensions in a manually configured network, just like if stateless auto-configuration
973 was active. Defaults to false.
</para>
977 <term><varname>PrefixRoute=
</varname></term>
979 <para>Takes a boolean. When adding or modifying an IPv6 address, the userspace
980 application needs a way to suppress adding a prefix route. This is for example relevant
981 together with IFA_F_MANAGERTEMPADDR, where userspace creates autoconf generated addresses,
982 but depending on on-link, no route for the prefix should be added. Defaults to false.
</para>
986 <term><varname>AutoJoin=
</varname></term>
988 <para>Takes a boolean. Joining multicast group on ethernet level via
989 <command>ip maddr
</command> command would not work if we have an Ethernet switch that does
990 IGMP snooping since the switch would not replicate multicast packets on ports that did not
991 have IGMP reports for the multicast addresses. Linux vxlan interfaces created via
992 <command>ip link add vxlan
</command> or networkd's netdev kind vxlan have the group option
993 that enables then to do the required join. By extending ip address command with option
994 <literal>autojoin
</literal> we can get similar functionality for openvswitch (OVS) vxlan
995 interfaces as well as other tunneling mechanisms that need to receive multicast traffic.
996 Defaults to
<literal>no
</literal>.
</para>
1003 <title>[Neighbor] Section Options
</title>
1004 <para>A
<literal>[Neighbor]
</literal> section accepts the
1005 following keys. The neighbor section adds a permanent, static
1006 entry to the neighbor table (IPv6) or ARP table (IPv4) for
1007 the given hardware address on the links matched for the network.
1008 Specify several
<literal>[Neighbor]
</literal> sections to configure
1009 several static neighbors.
</para>
1011 <variablelist class='network-directives'
>
1013 <term><varname>Address=
</varname></term>
1015 <para>The IP address of the neighbor.
</para>
1019 <term><varname>LinkLayerAddress=
</varname></term>
1021 <para>The link layer address (MAC address or IP address) of the neighbor.
</para>
1028 <title>[IPv6AddressLabel] Section Options
</title>
1030 <para>An
<literal>[IPv6AddressLabel]
</literal> section accepts the
1031 following keys. Specify several
<literal>[IPv6AddressLabel]
</literal>
1032 sections to configure several address labels. IPv6 address labels are
1033 used for address selection. See
<ulink url=
"https://tools.ietf.org/html/rfc3484">RFC
3484</ulink>.
1034 Precedence is managed by userspace, and only the label itself is stored in the kernel
</para>
1036 <variablelist class='network-directives'
>
1038 <term><varname>Label=
</varname></term>
1040 <para> The label for the prefix (an unsigned integer) ranges
0 to
4294967294.
1041 0xffffffff is reserved. This key is mandatory.
</para>
1045 <term><varname>Prefix=
</varname></term>
1047 <para>IPv6 prefix is an address with a prefix length, separated by a slash
<literal>/
</literal> character.
1048 This key is mandatory.
</para>
1055 <title>[RoutingPolicyRule] Section Options
</title>
1057 <para>An
<literal>[RoutingPolicyRule]
</literal> section accepts the
1058 following keys. Specify several
<literal>[RoutingPolicyRule]
</literal>
1059 sections to configure several rules.
</para>
1061 <variablelist class='network-directives'
>
1063 <term><varname>TypeOfService=
</varname></term>
1065 <para>Specifies the type of service to match a number between
0 to
255.
</para>
1069 <term><varname>From=
</varname></term>
1071 <para>Specifies the source address prefix to match. Possibly followed by a slash and the prefix length.
</para>
1075 <term><varname>To=
</varname></term>
1077 <para>Specifies the destination address prefix to match. Possibly followed by a slash and the prefix length.
</para>
1081 <term><varname>FirewallMark=
</varname></term>
1083 <para>Specifies the iptables firewall mark value to match (a number between
1 and
4294967295).
</para>
1087 <term><varname>Table=
</varname></term>
1089 <para>Specifies the routing table identifier to lookup if the rule selector matches. Takes
1090 one of
<literal>default
</literal>,
<literal>main
</literal>, and
<literal>local
</literal>,
1091 or a number between
1 and
4294967295. Defaults to
<literal>main
</literal>.
</para>
1095 <term><varname>Priority=
</varname></term>
1097 <para>Specifies the priority of this rule.
<varname>Priority=
</varname> is an unsigned
1098 integer. Higher number means lower priority, and rules get processed in order of increasing number.
</para>
1102 <term><varname>IncomingInterface=
</varname></term>
1104 <para>Specifies incoming device to match. If the interface is loopback, the rule only matches packets originating from this host.
</para>
1108 <term><varname>OutgoingInterface=
</varname></term>
1110 <para>Specifies the outgoing device to match. The outgoing interface is only available for packets originating from local sockets that are bound to a device.
</para>
1114 <term><varname>SourcePort=
</varname></term>
1116 <para>Specifies the source IP port or IP port range match in forwarding information base (FIB) rules.
1117 A port range is specified by the lower and upper port separated by a dash. Defaults to unset.
</para>
1121 <term><varname>DestinationPort=
</varname></term>
1123 <para>Specifies the destination IP port or IP port range match in forwarding information base (FIB) rules.
1124 A port range is specified by the lower and upper port separated by a dash. Defaults to unset.
</para>
1128 <term><varname>IPProtocol=
</varname></term>
1130 <para>Specifies the IP protocol to match in forwarding information base (FIB) rules. Takes IP protocol name such as
<literal>tcp
</literal>,
1131 <literal>udp
</literal> or
<literal>sctp
</literal>, or IP protocol number such as
<literal>6</literal> for
<literal>tcp
</literal> or
1132 <literal>17</literal> for
<literal>udp
</literal>.
1133 Defaults to unset.
</para>
1137 <term><varname>InvertRule=
</varname></term>
1139 <para>A boolean. Specifies whether the rule to be inverted. Defaults to false.
</para>
1146 <title>[Route] Section Options
</title>
1147 <para>The
<literal>[Route]
</literal> section accepts the
1148 following keys. Specify several
<literal>[Route]
</literal>
1149 sections to configure several routes.
</para>
1151 <variablelist class='network-directives'
>
1153 <term><varname>Gateway=
</varname></term>
1155 <para>As in the
<literal>[Network]
</literal> section.
</para>
1159 <term><varname>GatewayOnLink=
</varname></term>
1161 <para>Takes a boolean. If set to true, the kernel does not have
1162 to check if the gateway is reachable directly by the current machine (i.e., the kernel does
1163 not need to check if the gateway is attached to the local network), so that we can insert the
1164 route in the kernel table without it being complained about. Defaults to
<literal>no
</literal>.
1169 <term><varname>Destination=
</varname></term>
1171 <para>The destination prefix of the route. Possibly
1172 followed by a slash and the prefix length. If omitted, a
1173 full-length host route is assumed.
</para>
1177 <term><varname>Source=
</varname></term>
1179 <para>The source prefix of the route. Possibly followed by
1180 a slash and the prefix length. If omitted, a full-length
1181 host route is assumed.
</para>
1185 <term><varname>Metric=
</varname></term>
1187 <para>The metric of the route (an unsigned integer).
</para>
1191 <term><varname>IPv6Preference=
</varname></term>
1193 <para>Specifies the route preference as defined in
<ulink
1194 url=
"https://tools.ietf.org/html/rfc4191">RFC4191
</ulink> for Router Discovery messages.
1195 Which can be one of
<literal>low
</literal> the route has a lowest priority,
1196 <literal>medium
</literal> the route has a default priority or
1197 <literal>high
</literal> the route has a highest priority.
</para>
1201 <term><varname>Scope=
</varname></term>
1203 <para>The scope of the route, which can be
<literal>global
</literal>,
1204 <literal>link
</literal> or
<literal>host
</literal>. Defaults to
1205 <literal>global
</literal>.
</para>
1209 <term><varname>PreferredSource=
</varname></term>
1211 <para>The preferred source address of the route. The address
1212 must be in the format described in
1213 <citerefentry project='man-pages'
><refentrytitle>inet_pton
</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
</para>
1217 <term><varname>Table=
<replaceable>num
</replaceable></varname></term>
1219 <para>The table identifier for the route (a number between
1 and
4294967295, or
0 to unset).
1220 The table can be retrieved using
<command>ip route show table
<replaceable>num
</replaceable></command>.
1225 <term><varname>Protocol=
</varname></term>
1227 <para>The protocol identifier for the route. Takes a number between
0 and
255 or the special values
1228 <literal>kernel
</literal>,
<literal>boot
</literal>,
<literal>static
</literal>,
1229 <literal>ra
</literal> and
<literal>dhcp
</literal>. Defaults to
<literal>static
</literal>.
1234 <term><varname>Type=
</varname></term>
1236 <para>Specifies the type for the route. Takes one of
<literal>unicast
</literal>,
1237 <literal>local
</literal>,
<literal>broadcast
</literal>,
<literal>anycast
</literal>,
1238 <literal>multicast
</literal>,
<literal>blackhole
</literal>,
<literal>unreachable
</literal>,
1239 <literal>prohibit
</literal>,
<literal>throw
</literal>,
<literal>nat
</literal>, and
1240 <literal>xresolve
</literal>. If
<literal>unicast
</literal>, a regular route is defined, i.e. a
1241 route indicating the path to take to a destination network address. If
<literal>blackhole
</literal>, packets
1242 to the defined route are discarded silently. If
<literal>unreachable
</literal>, packets to the defined route
1243 are discarded and the ICMP message
"Host Unreachable" is generated. If
<literal>prohibit
</literal>, packets
1244 to the defined route are discarded and the ICMP message
"Communication Administratively Prohibited" is
1245 generated. If
<literal>throw
</literal>, route lookup in the current routing table will fail and the route
1246 selection process will return to Routing Policy Database (RPDB). Defaults to
<literal>unicast
</literal>.
1251 <term><varname>InitialCongestionWindow=
</varname></term>
1253 <para>The TCP initial congestion window is used during the start of a TCP connection. During the start of a TCP
1254 session, when a client requests a resource, the server's initial congestion window determines how many data bytes
1255 will be sent during the initial burst of data. Takes a size in bytes between
1 and
4294967295 (
2^
32 -
1). The usual
1256 suffixes K, M, G are supported and are understood to the base of
1024. When unset, the kernel's default will be used.
1261 <term><varname>InitialAdvertisedReceiveWindow=
</varname></term>
1263 <para>The TCP initial advertised receive window is the amount of receive data (in bytes) that can initially be buffered at one time
1264 on a connection. The sending host can send only that amount of data before waiting for an acknowledgment and window update
1265 from the receiving host. Takes a size in bytes between
1 and
4294967295 (
2^
32 -
1). The usual suffixes K, M, G are supported
1266 and are understood to the base of
1024. When unset, the kernel's default will be used.
1271 <term><varname>QuickAck=
</varname></term>
1273 <para>Takes a boolean. When true enables TCP quick ack mode for the route. When unset, the kernel's default will be used.
1278 <term><varname>FastOpenNoCookie=
</varname></term>
1280 <para>Takes a boolean. When true enables TCP fastopen without a cookie on a per-route basis.
1281 When unset, the kernel's default will be used.
1286 <term><varname>TTLPropagate=
</varname></term>
1288 <para>Takes a boolean. When true enables TTL propagation at Label Switched Path (LSP) egress.
1289 When unset, the kernel's default will be used.
1294 <term><varname>MTUBytes=
</varname></term>
1296 <para>The maximum transmission unit in bytes to set for the
1297 route. The usual suffixes K, M, G, are supported and are
1298 understood to the base of
1024.
</para>
1299 <para>Note that if IPv6 is enabled on the interface, and the MTU is chosen
1300 below
1280 (the minimum MTU for IPv6) it will automatically be increased to this value.
</para>
1307 <title>[DHCPv4] Section Options
</title>
1308 <para>The
<literal>[DHCPv4]
</literal> section configures the
1309 DHCPv4 client, if it is enabled with the
1310 <varname>DHCP=
</varname> setting described above:
</para>
1312 <variablelist class='network-directives'
>
1314 <term><varname>UseDNS=
</varname></term>
1316 <para>When true (the default), the DNS servers received
1317 from the DHCP server will be used and take precedence over
1318 any statically configured ones.
</para>
1320 <para>This corresponds to the
<option>nameserver
</option>
1321 option in
<citerefentry
1322 project='man-pages'
><refentrytitle>resolv.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
1326 <term><varname>RoutesToDNS=
</varname></term>
1328 <para>When true, the routes to the DNS servers received from the DHCP server will be
1329 configured. When
<varname>UseDNS=
</varname> is disabled, this setting is ignored.
1330 Defaults to false.
</para>
1334 <term><varname>UseNTP=
</varname></term>
1336 <para>When true (the default), the NTP servers received
1337 from the DHCP server will be used by systemd-timesyncd
1338 and take precedence over any statically configured ones.
</para>
1342 <term><varname>UseMTU=
</varname></term>
1344 <para>When true, the interface maximum transmission unit
1345 from the DHCP server will be used on the current link.
1346 If
<varname>MTUBytes=
</varname> is set, then this setting is ignored.
1347 Defaults to false.
</para>
1351 <term><varname>Anonymize=
</varname></term>
1353 <para>Takes a boolean. When true, the options sent to the DHCP server will
1354 follow the
<ulink url=
"https://tools.ietf.org/html/rfc7844">RFC
7844</ulink>
1355 (Anonymity Profiles for DHCP Clients) to minimize disclosure of identifying information.
1356 Defaults to false.
</para>
1358 <para>This option should only be set to true when
1359 <varname>MACAddressPolicy=
</varname> is set to
<literal>random
</literal>
1361 project='man-pages'
><refentrytitle>systemd.link
</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
</para>
1363 <para>Note that this configuration will overwrite others.
1364 In concrete, the following variables will be ignored:
1365 <varname>SendHostname=
</varname>,
<varname>ClientIdentifier=
</varname>,
1366 <varname>UseRoutes=
</varname>,
<varname>SendHostname=
</varname>,
1367 <varname>UseMTU=
</varname>,
<varname>VendorClassIdentifier=
</varname>,
1368 <varname>UseTimezone=
</varname>.
</para>
1370 <para>With this option enabled DHCP requests will mimic those generated by Microsoft Windows, in
1371 order to reduce the ability to fingerprint and recognize installations. This means DHCP request
1372 sizes will grow and lease data will be more comprehensive than normally, though most of the
1373 requested data is not actually used.
</para>
1377 <term><varname>SendHostname=
</varname></term>
1379 <para>When true (the default), the machine's hostname will be sent to the DHCP server.
1380 Note that the machine's hostname must consist only of
7-bit ASCII lower-case characters and
1381 no spaces or dots, and be formatted as a valid DNS domain name. Otherwise, the hostname is not
1382 sent even if this is set to true.
</para>
1386 <term><varname>UseHostname=
</varname></term>
1388 <para>When true (the default), the hostname received from
1389 the DHCP server will be set as the transient hostname of the system.
1394 <term><varname>Hostname=
</varname></term>
1396 <para>Use this value for the hostname which is sent to the DHCP server, instead of machine's hostname.
1397 Note that the specified hostname must consist only of
7-bit ASCII lower-case characters and
1398 no spaces or dots, and be formatted as a valid DNS domain name.
</para>
1402 <term><varname>UseDomains=
</varname></term>
1404 <para>Takes a boolean, or the special value
<literal>route
</literal>. When true, the domain name
1405 received from the DHCP server will be used as DNS search domain over this link, similar to the effect of
1406 the
<option>Domains=
</option> setting. If set to
<literal>route
</literal>, the domain name received from
1407 the DHCP server will be used for routing DNS queries only, but not for searching, similar to the effect of
1408 the
<option>Domains=
</option> setting when the argument is prefixed with
<literal>~
</literal>. Defaults to
1411 <para>It is recommended to enable this option only on trusted networks, as setting this affects resolution
1412 of all host names, in particular of single-label names. It is generally safer to use the supplied domain
1413 only as routing domain, rather than as search domain, in order to not have it affect local resolution of
1414 single-label names.
</para>
1416 <para>When set to true, this setting corresponds to the
<option>domain
</option> option in
<citerefentry
1417 project='man-pages'
><refentrytitle>resolv.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
1421 <term><varname>UseRoutes=
</varname></term>
1423 <para>When true (the default), the static routes will be requested from the DHCP server and added to the
1424 routing table with a metric of
1024, and a scope of
"global",
"link" or
"host", depending on the route's
1425 destination and gateway. If the destination is on the local host, e.g.,
127.x.x.x, or the same as the
1426 link's own address, the scope will be set to
"host". Otherwise if the gateway is null (a direct route), a
1427 "link" scope will be used. For anything else, scope defaults to
"global".
</para>
1432 <term><varname>UseTimezone=
</varname></term>
1434 <listitem><para>When true, the timezone received from the
1435 DHCP server will be set as timezone of the local
1436 system. Defaults to
<literal>no
</literal>.
</para></listitem>
1440 <term><varname>ClientIdentifier=
</varname></term>
1442 <para>The DHCPv4 client identifier to use. Takes one of
<literal>mac
</literal>,
<literal>duid
</literal> or
<literal>duid-only
</literal>.
1443 If set to
<literal>mac
</literal>, the MAC address of the link is used.
1444 If set to
<literal>duid
</literal>, an RFC4361-compliant Client ID, which is the combination of IAID and DUID (see below), is used.
1445 If set to
<literal>duid-only
</literal>, only DUID is used, this may not be RFC compliant, but some setups may require to use this.
1446 Defaults to
<literal>duid
</literal>.
</para>
1451 <term><varname>VendorClassIdentifier=
</varname></term>
1453 <para>The vendor class identifier used to identify vendor
1454 type and configuration.
</para>
1459 <term><varname>UserClass=
</varname></term>
1461 <para>A DHCPv4 client can use UserClass option to identify the type or category of user or applications
1462 it represents. The information contained in this option is a string that represents the user class of which
1463 the client is a member. Each class sets an identifying string of information to be used by the DHCP
1464 service to classify clients. Takes a whitespace-separated list of strings.
</para>
1469 <term><varname>MaxAttempts=
</varname></term>
1471 <para>Specifies how many times the DHCPv4 client configuration should be attempted. Takes a
1472 number or
<literal>infinity
</literal>. Defaults to
<literal>infinity
</literal>.
1473 Note that the time between retries is increased exponentially, so the network will not be
1474 overloaded even if this number is high.
</para>
1479 <term><varname>DUIDType=
</varname></term>
1481 <para>Override the global
<varname>DUIDType
</varname> setting for this network. See
1482 <citerefentry><refentrytitle>networkd.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
1483 for a description of possible values.
</para>
1488 <term><varname>DUIDRawData=
</varname></term>
1490 <para>Override the global
<varname>DUIDRawData
</varname> setting for this network. See
1491 <citerefentry><refentrytitle>networkd.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>
1492 for a description of possible values.
</para>
1497 <term><varname>IAID=
</varname></term>
1499 <para>The DHCP Identity Association Identifier (IAID) for the interface, a
32-bit unsigned integer.
</para>
1504 <term><varname>RequestBroadcast=
</varname></term>
1506 <para>Request the server to use broadcast messages before
1507 the IP address has been configured. This is necessary for
1508 devices that cannot receive RAW packets, or that cannot
1509 receive packets at all before an IP address has been
1510 configured. On the other hand, this must not be enabled on
1511 networks where broadcasts are filtered out.
</para>
1516 <term><varname>RouteMetric=
</varname></term>
1518 <para>Set the routing metric for routes specified by the
1524 <term><varname>RouteTable=
<replaceable>num
</replaceable></varname></term>
1526 <para>The table identifier for DHCP routes (a number between
1 and
4294967295, or
0 to unset).
1527 The table can be retrieved using
<command>ip route show table
<replaceable>num
</replaceable></command>.
1529 <para>When used in combination with
<varname>VRF=
</varname> the
1530 VRF's routing table is used unless this parameter is specified.
1536 <term><varname>ListenPort=
</varname></term>
1538 <para>Allow setting custom port for the DHCP client to listen on.
</para>
1543 <term><varname>SendRelease=
</varname></term>
1545 <para>When true, the DHCPv4 client sends a DHCP release packet when it stops.
1546 Defaults to false.
</para>
1551 <term><varname>BlackList=
</varname></term>
1553 <para>A whitespace-separated list of IPv4 addresses. DHCP offers from servers in the list are rejected.
</para>
1561 <title>[DHCPv6] Section Options
</title>
1562 <para>The
<literal>[DHCPv6]
</literal> section configures the DHCPv6 client, if it is enabled with the
1563 <varname>DHCP=
</varname> setting described above, or invoked by the IPv6 Router Advertisement:
</para>
1565 <variablelist class='network-directives'
>
1567 <term><varname>UseDNS=
</varname></term>
1568 <term><varname>UseNTP=
</varname></term>
1570 <para>As in the
<literal>[DHCPv4]
</literal> section.
</para>
1575 <term><varname>RapidCommit=
</varname></term>
1577 <para>Takes a boolean. The DHCPv6 client can obtain configuration parameters from a DHCPv6 server through
1578 a rapid two-message exchange (solicit and reply). When the rapid commit option is enabled by both
1579 the DHCPv6 client and the DHCPv6 server, the two-message exchange is used, rather than the default
1580 four-method exchange (solicit, advertise, request, and reply). The two-message exchange provides
1581 faster client configuration and is beneficial in environments in which networks are under a heavy load.
1582 See
<ulink url=
"https://tools.ietf.org/html/rfc3315#section-17.2.1">RFC
3315</ulink> for details.
1583 Defaults to true.
</para>
1588 <term><varname>ForceDHCPv6PDOtherInformation=
</varname></term>
1590 <para>Takes a boolean that enforces DHCPv6 stateful mode when the 'Other information' bit is set in
1591 Router Advertisement messages. By default setting only the 'O' bit in Router Advertisements
1592 makes DHCPv6 request network information in a stateless manner using a two-message Information
1593 Request and Information Reply message exchange.
1594 <ulink url=
"https://tools.ietf.org/html/rfc7084">RFC
7084</ulink>, requirement WPD-
4, updates
1595 this behavior for a Customer Edge router so that stateful DHCPv6 Prefix Delegation is also
1596 requested when only the 'O' bit is set in Router Advertisements. This option enables such a CE
1597 behavior as it is impossible to automatically distinguish the intention of the 'O' bit otherwise.
1598 By default this option is set to 'false', enable it if no prefixes are delegated when the device
1599 should be acting as a CE router.
</para>
1607 <title>[IPv6AcceptRA] Section Options
</title>
1608 <para>The
<literal>[IPv6AcceptRA]
</literal> section configures the IPv6 Router Advertisement
1609 (RA) client, if it is enabled with the
<varname>IPv6AcceptRA=
</varname> setting described
1612 <variablelist class='network-directives'
>
1614 <term><varname>UseDNS=
</varname></term>
1616 <para>When true (the default), the DNS servers received in the Router Advertisement will be used and take
1617 precedence over any statically configured ones.
</para>
1619 <para>This corresponds to the
<option>nameserver
</option> option in
<citerefentry
1620 project='man-pages'
><refentrytitle>resolv.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
1625 <term><varname>UseDomains=
</varname></term>
1627 <para>Takes a boolean, or the special value
<literal>route
</literal>. When true, the domain name
1628 received via IPv6 Router Advertisement (RA) will be used as DNS search domain over this link, similar to
1629 the effect of the
<option>Domains=
</option> setting. If set to
<literal>route
</literal>, the domain name
1630 received via IPv6 RA will be used for routing DNS queries only, but not for searching, similar to the
1631 effect of the
<option>Domains=
</option> setting when the argument is prefixed with
1632 <literal>~
</literal>. Defaults to false.
</para>
1634 <para>It is recommended to enable this option only on trusted networks, as setting this affects resolution
1635 of all host names, in particular of single-label names. It is generally safer to use the supplied domain
1636 only as routing domain, rather than as search domain, in order to not have it affect local resolution of
1637 single-label names.
</para>
1639 <para>When set to true, this setting corresponds to the
<option>domain
</option> option in
<citerefentry
1640 project='man-pages'
><refentrytitle>resolv.conf
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
1645 <term><varname>RouteTable=
<replaceable>num
</replaceable></varname></term>
1647 <para>The table identifier for the routes received in the Router Advertisement
1648 (a number between
1 and
4294967295, or
0 to unset).
1649 The table can be retrieved using
<command>ip route show table
<replaceable>num
</replaceable></command>.
1655 <term><varname>UseAutonomousPrefix=
</varname></term>
1657 <para>When true (the default), the autonomous prefix received in the Router Advertisement will be used and take
1658 precedence over any statically configured ones.
</para>
1663 <term><varname>UseOnLinkPrefix=
</varname></term>
1665 <para>When true (the default), the onlink prefix received in the Router Advertisement will be used and take
1666 precedence over any statically configured ones.
</para>
1671 <term><varname>BlackList=
</varname></term>
1673 <para>A whitespace-separated list of IPv6 prefixes. IPv6 prefixes supplied via router advertisements in the list are ignored.
</para>
1681 <title>[DHCPServer] Section Options
</title>
1682 <para>The
<literal>[DHCPServer]
</literal> section contains
1683 settings for the DHCP server, if enabled via the
1684 <varname>DHCPServer=
</varname> option described above:
</para>
1686 <variablelist class='network-directives'
>
1689 <term><varname>PoolOffset=
</varname></term>
1690 <term><varname>PoolSize=
</varname></term>
1692 <listitem><para>Configures the pool of addresses to hand out. The pool
1693 is a contiguous sequence of IP addresses in the subnet configured for
1694 the server address, which does not include the subnet nor the broadcast
1695 address.
<varname>PoolOffset=
</varname> takes the offset of the pool
1696 from the start of subnet, or zero to use the default value.
1697 <varname>PoolSize=
</varname> takes the number of IP addresses in the
1698 pool or zero to use the default value. By default, the pool starts at
1699 the first address after the subnet address and takes up the rest of
1700 the subnet, excluding the broadcast address. If the pool includes
1701 the server address (the default), this is reserved and not handed
1702 out to clients.
</para></listitem>
1706 <term><varname>DefaultLeaseTimeSec=
</varname></term>
1707 <term><varname>MaxLeaseTimeSec=
</varname></term>
1709 <listitem><para>Control the default and maximum DHCP lease
1710 time to pass to clients. These settings take time values in seconds or
1711 another common time unit, depending on the suffix. The default
1712 lease time is used for clients that did not ask for a specific
1713 lease time. If a client asks for a lease time longer than the
1714 maximum lease time, it is automatically shortened to the
1715 specified time. The default lease time defaults to
1h, the
1716 maximum lease time to
12h. Shorter lease times are beneficial
1717 if the configuration data in DHCP leases changes frequently
1718 and clients shall learn the new settings with shorter
1719 latencies. Longer lease times reduce the generated DHCP
1720 network traffic.
</para></listitem>
1724 <term><varname>EmitDNS=
</varname></term>
1725 <term><varname>DNS=
</varname></term>
1727 <listitem><para>Takes a boolean. Configures whether the DHCP leases handed out
1728 to clients shall contain DNS server information. Defaults to
<literal>yes
</literal>.
1729 The DNS servers to pass to clients may be configured with the
1730 <varname>DNS=
</varname> option, which takes a list of IPv4
1731 addresses. If the
<varname>EmitDNS=
</varname> option is
1732 enabled but no servers configured, the servers are
1733 automatically propagated from an
"uplink" interface that has
1734 appropriate servers set. The
"uplink" interface is determined
1735 by the default route of the system with the highest
1736 priority. Note that this information is acquired at the time
1737 the lease is handed out, and does not take uplink interfaces
1738 into account that acquire DNS or NTP server information at a
1739 later point. DNS server propagation does not take
1740 <filename>/etc/resolv.conf
</filename> into account. Also, note
1741 that the leases are not refreshed if the uplink network
1742 configuration changes. To ensure clients regularly acquire the
1743 most current uplink DNS server information, it is thus
1744 advisable to shorten the DHCP lease time via
1745 <varname>MaxLeaseTimeSec=
</varname> described
1746 above.
</para></listitem>
1750 <term><varname>EmitNTP=
</varname></term>
1751 <term><varname>NTP=
</varname></term>
1753 <listitem><para>Similar to the
<varname>EmitDNS=
</varname> and
1754 <varname>DNS=
</varname> settings described above, these
1755 settings configure whether and what NTP server information
1756 shall be emitted as part of the DHCP lease. The same syntax,
1757 propagation semantics and defaults apply as for
1758 <varname>EmitDNS=
</varname> and
1759 <varname>DNS=
</varname>.
</para></listitem>
1763 <term><varname>EmitRouter=
</varname></term>
1765 <listitem><para>Similar to the
<varname>EmitDNS=
</varname>
1766 setting described above, this setting configures whether the
1767 DHCP lease should contain the router option. The same syntax,
1768 propagation semantics and defaults apply as for
1769 <varname>EmitDNS=
</varname>.
</para></listitem>
1773 <term><varname>EmitTimezone=
</varname></term>
1774 <term><varname>Timezone=
</varname></term>
1776 <listitem><para>Takes a boolean. Configures whether the DHCP leases handed out
1777 to clients shall contain timezone information. Defaults to
<literal>yes
</literal>. The
1778 <varname>Timezone=
</varname> setting takes a timezone string
1779 (such as
<literal>Europe/Berlin
</literal> or
1780 <literal>UTC
</literal>) to pass to clients. If no explicit
1781 timezone is set, the system timezone of the local host is
1782 propagated, as determined by the
1783 <filename>/etc/localtime
</filename> symlink.
</para></listitem>
1790 <title>[IPv6PrefixDelegation] Section Options
</title>
1791 <para>The
<literal>[IPv6PrefixDelegation]
</literal> section contains
1792 settings for sending IPv6 Router Advertisements and whether to act as
1793 a router, if enabled via the
<varname>IPv6PrefixDelegation=
</varname>
1794 option described above. IPv6 network prefixes are defined with one or
1795 more
<literal>[IPv6Prefix]
</literal> sections.
</para>
1797 <variablelist class='network-directives'
>
1800 <term><varname>Managed=
</varname></term>
1801 <term><varname>OtherInformation=
</varname></term>
1803 <listitem><para>Takes a boolean. Controls whether a DHCPv6 server is used to acquire IPv6
1804 addresses on the network link when
<varname>Managed=
</varname>
1805 is set to
<literal>true
</literal> or if only additional network
1806 information can be obtained via DHCPv6 for the network link when
1807 <varname>OtherInformation=
</varname> is set to
1808 <literal>true
</literal>. Both settings default to
1809 <literal>false
</literal>, which means that a DHCPv6 server is not being
1810 used.
</para></listitem>
1814 <term><varname>RouterLifetimeSec=
</varname></term>
1816 <listitem><para>Takes a timespan. Configures the IPv6 router lifetime in seconds. If set,
1817 this host also announces itself in Router Advertisements as an IPv6
1818 router for the network link. When unset, the host is not acting as a router.
</para>
1823 <term><varname>RouterPreference=
</varname></term>
1825 <listitem><para>Configures IPv6 router preference if
1826 <varname>RouterLifetimeSec=
</varname> is non-zero. Valid values are
1827 <literal>high
</literal>,
<literal>medium
</literal> and
1828 <literal>low
</literal>, with
<literal>normal
</literal> and
1829 <literal>default
</literal> added as synonyms for
1830 <literal>medium
</literal> just to make configuration easier. See
1831 <ulink url=
"https://tools.ietf.org/html/rfc4191">RFC
4191</ulink>
1832 for details. Defaults to
<literal>medium
</literal>.
</para></listitem>
1836 <term><varname>EmitDNS=
</varname></term>
1837 <term><varname>DNS=
</varname></term>
1839 <listitem><para><varname>DNS=
</varname> specifies a list of recursive
1840 DNS server IPv6 addresses that distributed via Router Advertisement
1841 messages when
<varname>EmitDNS=
</varname> is true. If
<varname>DNS=
1842 </varname> is empty, DNS servers are read from the
1843 <literal>[Network]
</literal> section. If the
1844 <literal>[Network]
</literal> section does not contain any DNS servers
1845 either, DNS servers from the uplink with the highest priority default
1846 route are used. When
<varname>EmitDNS=
</varname> is false, no DNS server
1847 information is sent in Router Advertisement messages.
1848 <varname>EmitDNS=
</varname> defaults to true.
1853 <term><varname>EmitDomains=
</varname></term>
1854 <term><varname>Domains=
</varname></term>
1856 <listitem><para>A list of DNS search domains distributed via Router
1857 Advertisement messages when
<varname>EmitDomains=
</varname> is true. If
1858 <varname>Domains=
</varname> is empty, DNS search domains are read from the
1859 <literal>[Network]
</literal> section. If the
<literal>[Network]
</literal>
1860 section does not contain any DNS search domains either, DNS search
1861 domains from the uplink with the highest priority default route are
1862 used. When
<varname>EmitDomains=
</varname> is false, no DNS search domain
1863 information is sent in Router Advertisement messages.
1864 <varname>EmitDomains=
</varname> defaults to true.
1869 <term><varname>DNSLifetimeSec=
</varname></term>
1871 <listitem><para>Lifetime in seconds for the DNS server addresses listed
1872 in
<varname>DNS=
</varname> and search domains listed in
1873 <varname>Domains=
</varname>.
</para></listitem>
1880 <title>[IPv6Prefix] Section Options
</title>
1881 <para>One or more
<literal>[IPv6Prefix]
</literal> sections contain the IPv6
1882 prefixes that are announced via Router Advertisements. See
1883 <ulink url=
"https://tools.ietf.org/html/rfc4861">RFC
4861</ulink>
1884 for further details.
</para>
1886 <variablelist class='network-directives'
>
1889 <term><varname>AddressAutoconfiguration=
</varname></term>
1890 <term><varname>OnLink=
</varname></term>
1892 <listitem><para>Takes a boolean to specify whether IPv6 addresses can be
1893 autoconfigured with this prefix and whether the prefix can be used for
1894 onlink determination. Both settings default to
<literal>true
</literal>
1895 in order to ease configuration.
1900 <term><varname>Prefix=
</varname></term>
1902 <listitem><para>The IPv6 prefix that is to be distributed to hosts.
1903 Similarly to configuring static IPv6 addresses, the setting is
1904 configured as an IPv6 prefix and its prefix length, separated by a
1905 <literal>/
</literal> character. Use multiple
1906 <literal>[IPv6Prefix]
</literal> sections to configure multiple IPv6
1907 prefixes since prefix lifetimes, address autoconfiguration and onlink
1908 status may differ from one prefix to another.
</para></listitem>
1912 <term><varname>PreferredLifetimeSec=
</varname></term>
1913 <term><varname>ValidLifetimeSec=
</varname></term>
1915 <listitem><para>Preferred and valid lifetimes for the prefix measured in
1916 seconds.
<varname>PreferredLifetimeSec=
</varname> defaults to
604800
1917 seconds (one week) and
<varname>ValidLifetimeSec=
</varname> defaults
1918 to
2592000 seconds (
30 days).
</para></listitem>
1925 <title>[Bridge] Section Options
</title>
1926 <para>The
<literal>[Bridge]
</literal> section accepts the
1927 following keys.
</para>
1928 <variablelist class='network-directives'
>
1930 <term><varname>UnicastFlood=
</varname></term>
1932 <para>Takes a boolean. Controls whether the bridge should flood
1933 traffic for which an FDB entry is missing and the destination
1934 is unknown through this port. When unset, the kernel's default will be used.
1939 <term><varname>MulticastFlood=
</varname></term>
1941 <para>Takes a boolean. Controls whether the bridge should flood
1942 traffic for which an MDB entry is missing and the destination
1943 is unknown through this port. When unset, the kernel's default will be used.
1948 <term><varname>MulticastToUnicast=
</varname></term>
1950 <para>Takes a boolean. Multicast to unicast works on top of the multicast snooping feature of
1951 the bridge. Which means unicast copies are only delivered to hosts which are interested in it.
1952 When unset, the kernel's default will be used.
1957 <term><varname>NeighborSuppression=
</varname></term>
1959 <para>Takes a boolean. Configures whether ARP and ND neighbor suppression is enabled for
1960 this port. When unset, the kernel's default will be used.
1965 <term><varname>Learning=
</varname></term>
1967 <para>Takes a boolean. Configures whether MAC address learning is enabled for
1968 this port. When unset, the kernel's default will be used.
1973 <term><varname>HairPin=
</varname></term>
1975 <para>Takes a boolean. Configures whether traffic may be sent back
1976 out of the port on which it was received. When this flag is false, and the bridge
1977 will not forward traffic back out of the receiving port.
1978 When unset, the kernel's default will be used.
</para>
1982 <term><varname>UseBPDU=
</varname></term>
1984 <para>Takes a boolean. Configures whether STP Bridge Protocol Data Units will be
1985 processed by the bridge port. When unset, the kernel's default will be used.
</para>
1989 <term><varname>FastLeave=
</varname></term>
1991 <para>Takes a boolean. This flag allows the bridge to immediately stop multicast
1992 traffic on a port that receives an IGMP Leave message. It is only used with
1993 IGMP snooping if enabled on the bridge. When unset, the kernel's default will be used.
</para>
1997 <term><varname>AllowPortToBeRoot=
</varname></term>
1999 <para>Takes a boolean. Configures whether a given port is allowed to
2000 become a root port. Only used when STP is enabled on the bridge.
2001 When unset, the kernel's default will be used.
</para>
2005 <term><varname>ProxyARP=
</varname></term>
2007 <para>Takes a boolean. Configures whether proxy ARP to be enabled on this port.
2008 When unset, the kernel's default will be used.
</para>
2012 <term><varname>ProxyARPWiFi=
</varname></term>
2014 <para>Takes a boolean. Configures whether proxy ARP to be enabled on this port
2015 which meets extended requirements by IEEE
802.11 and Hotspot
2.0 specifications.
2016 When unset, the kernel's default will be used.
</para>
2020 <term><varname>MulticastRouter=
</varname></term>
2022 <para>Configures this port for having multicast routers attached. A port with a multicast
2023 router will receive all multicast traffic. Takes one of
<literal>no
</literal>
2024 to disable multicast routers on this port,
<literal>query
</literal> to let the system detect
2025 the presence of routers,
<literal>permanent
</literal> to permanently enable multicast traffic
2026 forwarding on this port, or
<literal>temporary
</literal> to enable multicast routers temporarily
2027 on this port, not depending on incoming queries. When unset, the kernel's default will be used.
</para>
2031 <term><varname>Cost=
</varname></term>
2033 <para>Sets the
"cost" of sending packets of this interface.
2034 Each port in a bridge may have a different speed and the cost
2035 is used to decide which link to use. Faster interfaces
2036 should have lower costs. It is an integer value between
1 and
2041 <term><varname>Priority=
</varname></term>
2043 <para>Sets the
"priority" of sending packets on this interface.
2044 Each port in a bridge may have a different priority which is used
2045 to decide which link to use. Lower value means higher priority.
2046 It is an integer value between
0 to
63. Networkd does not set any
2047 default, meaning the kernel default value of
32 is used.
</para>
2053 <title>[BridgeFDB] Section Options
</title>
2054 <para>The
<literal>[BridgeFDB]
</literal> section manages the
2055 forwarding database table of a port and accepts the following
2056 keys. Specify several
<literal>[BridgeFDB]
</literal> sections to
2057 configure several static MAC table entries.
</para>
2059 <variablelist class='network-directives'
>
2061 <term><varname>MACAddress=
</varname></term>
2063 <para>As in the
<literal>[Network]
</literal> section. This
2064 key is mandatory.
</para>
2068 <term><varname>Destination=
</varname></term>
2070 <para>Takes an IP address of the destination VXLAN tunnel endpoint.
</para>
2074 <term><varname>VLANId=
</varname></term>
2076 <para>The VLAN ID for the new static MAC table entry. If
2077 omitted, no VLAN ID information is appended to the new static MAC
2082 <term><varname>VNI=
</varname></term>
2084 <para>The VXLAN Network Identifier (or VXLAN Segment ID) to use to connect to
2085 the remote VXLAN tunnel endpoint. Takes a number in the range
1-
16777215.
2086 Defaults to unset.
</para>
2090 <term><varname>AssociatedWith=
</varname></term>
2092 <para>Specifies where the address is associated with. Takes one of
<literal>use
</literal>,
2093 <literal>self
</literal>,
<literal>master
</literal> or
<literal>router
</literal>.
2094 <literal>use
</literal> means the address is in use. User space can use this option to
2095 indicate to the kernel that the fdb entry is in use.
<literal>self
</literal> means
2096 the address is associated with the port drivers fdb. Usually hardware.
<literal>master
</literal>
2097 means the address is associated with master devices fdb.
<literal>router
</literal> means
2098 the destination address is associated with a router. Note that it's valid if the referenced
2099 device is a VXLAN type device and has route shortcircuit enabled. Defaults to
<literal>self
</literal>.
</para>
2106 <title>[CAN] Section Options
</title>
2107 <para>The
<literal>[CAN]
</literal> section manages the Controller Area Network (CAN bus) and accepts the
2108 following keys.
</para>
2109 <variablelist class='network-directives'
>
2111 <term><varname>BitRate=
</varname></term>
2113 <para>The bitrate of CAN device in bits per second. The usual SI prefixes (K, M) with the base of
1000 can
2114 be used here.
</para>
2118 <term><varname>SamplePoint=
</varname></term>
2120 <para>Optional sample point in percent with one decimal (e.g.
<literal>75%
</literal>,
2121 <literal>87.5%
</literal>) or permille (e.g.
<literal>875‰
</literal>).
</para>
2125 <term><varname>RestartSec=
</varname></term>
2127 <para>Automatic restart delay time. If set to a non-zero value, a restart of the CAN controller will be
2128 triggered automatically in case of a bus-off condition after the specified delay time. Subsecond delays can
2129 be specified using decimals (e.g.
<literal>0.1s
</literal>) or a
<literal>ms
</literal> or
2130 <literal>us
</literal> postfix. Using
<literal>infinity
</literal> or
<literal>0</literal> will turn the
2131 automatic restart off. By default automatic restart is disabled.
</para>
2135 <term><varname>TripleSampling=
</varname></term>
2137 <para>Takes a boolean. When
<literal>yes
</literal>, three samples (instead of one) are used to determine
2138 the value of a received bit by majority rule. When unset, the kernel's default will be used.
</para>
2145 <title>[BridgeVLAN] Section Options
</title>
2146 <para>The
<literal>[BridgeVLAN]
</literal> section manages the VLAN ID configuration of a bridge port and accepts
2147 the following keys. Specify several
<literal>[BridgeVLAN]
</literal> sections to configure several VLAN entries.
2148 The
<varname>VLANFiltering=
</varname> option has to be enabled, see
<literal>[Bridge]
</literal> section in
2149 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
2151 <variablelist class='network-directives'
>
2153 <term><varname>VLAN=
</varname></term>
2155 <para>The VLAN ID allowed on the port. This can be either a single ID or a range M-N. VLAN IDs are valid
2156 from
1 to
4094.
</para>
2160 <term><varname>EgressUntagged=
</varname></term>
2162 <para>The VLAN ID specified here will be used to untag frames on egress. Configuring
2163 <varname>EgressUntagged=
</varname> implicates the use of
<varname>VLAN=
</varname> above and will enable the
2164 VLAN ID for ingress as well. This can be either a single ID or a range M-N.
</para>
2168 <term><varname>PVID=
</varname></term>
2170 <para>The Port VLAN ID specified here is assigned to all untagged frames at ingress.
2171 <varname>PVID=
</varname> can be used only once. Configuring
<varname>PVID=
</varname> implicates the use of
2172 <varname>VLAN=
</varname> above and will enable the VLAN ID for ingress as well.
</para>
2179 <title>Examples
</title>
2181 <title>Static network configuration
</title>
2183 <programlisting># /etc/systemd/network/
50-static.network
2188 Address=
192.168.0.15/
24
2189 Gateway=
192.168.0.1</programlisting>
2191 <para>This brings interface
<literal>enp2s0
</literal> up with a static address. The
2192 specified gateway will be used for a default route.
</para>
2196 <title>DHCP on ethernet links
</title>
2198 <programlisting># /etc/systemd/network/
80-dhcp.network
2203 DHCP=yes
</programlisting>
2205 <para>This will enable DHCPv4 and DHCPv6 on all interfaces with names starting with
2206 <literal>en
</literal> (i.e. ethernet interfaces).
</para>
2210 <title>IPv6 Prefix Delegation
</title>
2212 <programlisting># /etc/systemd/network/
55-ipv6-pd-upstream.network
2217 DHCP=ipv6
</programlisting>
2219 <programlisting># /etc/systemd/network/
56-ipv6-pd-downstream.network
2224 IPv6PrefixDelegation=dhcpv6
</programlisting>
2226 <para>This will enable IPv6 PD on the interface enp1s0 as an upstream interface where the
2227 DHCPv6 client is running and enp2s0 as a downstream interface where the prefix is delegated to.
</para>
2231 <title>A bridge with two enslaved links
</title>
2233 <programlisting># /etc/systemd/network/
25-bridge-static.network
2238 Address=
192.168.0.15/
24
2240 DNS=
192.168.0.1</programlisting>
2242 <programlisting># /etc/systemd/network/
25-bridge-slave-interface-
1.network
2247 Bridge=bridge0
</programlisting>
2249 <programlisting># /etc/systemd/network/
25-bridge-slave-interface-
2.network
2254 Bridge=bridge0
</programlisting>
2256 <para>This creates a bridge and attaches devices
<literal>enp2s0
</literal> and
2257 <literal>wlp3s0
</literal> to it. The bridge will have the specified static address
2258 and network assigned, and a default route via the specified gateway will be
2259 added. The specified DNS server will be added to the global list of DNS resolvers.
2267 # /etc/systemd/network/
20-bridge-slave-interface-vlan.network
2283 EgressUntagged=
300-
400</programlisting>
2285 <para>This overrides the configuration specified in the previous example for the
2286 interface
<literal>enp2s0
</literal>, and enables VLAN on that bridge port. VLAN IDs
2287 1-
32,
42,
100-
400 will be allowed. Packets tagged with VLAN IDs
42,
300-
400 will be
2288 untagged when they leave on this interface. Untagged packets which arrive on this
2289 interface will be assigned VLAN ID
42.
</para>
2293 <title>Various tunnels
</title>
2295 <programlisting>/etc/systemd/network/
25-tunnels.network
2306 <programlisting>/etc/systemd/network/
25-tunnel-ipip.netdev
2312 <programlisting>/etc/systemd/network/
25-tunnel-sit.netdev
2318 <programlisting>/etc/systemd/network/
25-tunnel-gre.netdev
2324 <programlisting>/etc/systemd/network/
25-tunnel-vti.netdev
2330 <para>This will bring interface
<literal>ens1
</literal> up and create an IPIP tunnel,
2331 a SIT tunnel, a GRE tunnel, and a VTI tunnel using it.
</para>
2335 <title>A bond device
</title>
2337 <programlisting># /etc/systemd/network/
30-bond1.network
2345 <programlisting># /etc/systemd/network/
30-bond1.netdev
2351 <programlisting># /etc/systemd/network/
30-bond1-dev1.network
2353 MACAddress=
52:
54:
00:e9:
64:
41
2359 <programlisting># /etc/systemd/network/
30-bond1-dev2.network
2361 MACAddress=
52:
54:
00:e9:
64:
42
2367 <para>This will create a bond device
<literal>bond1
</literal> and enslave the two
2368 devices with MAC addresses
52:
54:
00:e9:
64:
41 and
52:
54:
00:e9:
64:
42 to it. IPv6 DHCP
2369 will be used to acquire an address.
</para>
2373 <title>Virtual Routing and Forwarding (VRF)
</title>
2374 <para>Add the
<literal>bond1
</literal> interface to the VRF master interface
2375 <literal>vrf1
</literal>. This will redirect routes generated on this interface to be
2376 within the routing table defined during VRF creation. For kernels before
4.8 traffic
2377 won't be redirected towards the VRFs routing table unless specific ip-rules are added.
2379 <programlisting># /etc/systemd/network/
25-vrf.network
2389 <title>MacVTap
</title>
2390 <para>This brings up a network interface
<literal>macvtap-test
</literal>
2391 and attaches it to
<literal>enp0s25
</literal>.
</para>
2392 <programlisting># /usr/lib/systemd/network/
25-macvtap.network
2397 MACVTAP=macvtap-test
2402 <title>A Xfrm interface with physical underlying device.
</title>
2404 <programlisting># /etc/systemd/network/
27-xfrm.netdev
2409 InterfaceId=
7</programlisting>
2411 <programlisting># /etc/systemd/network/
27-eth0.network
2416 Xfrm=xfrm0
</programlisting>
2418 <para>This creates a
<literal>xfrm0
</literal> interface and binds it to the
<literal>eth0
</literal> device.
2419 This allows hardware based ipsec offloading to the
<literal>eth0
</literal> nic.
2420 If offloading is not needed, xfrm interfaces can be assigned to the
<literal>lo
</literal> device.
2426 <title>See Also
</title>
2428 <citerefentry><refentrytitle>systemd
</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
2429 <citerefentry><refentrytitle>systemd-networkd.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
2430 <citerefentry><refentrytitle>systemd.link
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
2431 <citerefentry><refentrytitle>systemd.netdev
</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
2432 <citerefentry><refentrytitle>systemd-resolved.service
</refentrytitle><manvolnum>8</manvolnum></citerefentry>