shell-completion/zsh/_systemd

   1 #compdef journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl
   2
   3 _ctls()
   4 {
   5     local curcontext="$curcontext" state lstate line
   6     case "$service" in
   7         hostnamectl)
   8             _arguments -s \
   9                 {-h,--help}'[Show this help]' \
  10                 '--version[Show package version]' \
  11                 '--transient[Only set transient hostname]' \
  12                 '--static[Only set static hostname]' \
  13                 '--pretty[Only set pretty hostname]' \
  14                 '--no-ask-password[Do not prompt for password]' \
  15                 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
  16                 '*::hostnamectl commands:_hostnamectl_command'
  17         ;;
  18         journalctl)
  19             _arguments -s \
  20                 '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
  21                 '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
  22                 {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
  23                 '--system[Show system and kernel messages]' \
  24                 '--user[Show messages from user services]' \
  25                 {-b,--this-boot}'[Show data only from current boot]' \
  26                 {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
  27                 '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
  28                 {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
  29                 {-f,--follow}'[Follow journal]' \
  30                 {-n,--lines=}'[Number of journal entries to show]:integer' \
  31                 '--no-tail[Show all lines, even in follow mode]' \
  32                 {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
  33                 {-l,--full}'[Show long fields in full]' \
  34                 {-a,--all}'[Show all fields, including long and unprintable]' \
  35                 {-q,--quiet}"[Don't show privilege warning]" \
  36                 '--no-pager[Do not pipe output into a pager]' \
  37                 {-m,--merge}'[Show entries from all available journals]' \
  38                 {-D,--directory=}'[Show journal files from directory]:directories:_directories' \
  39                 '--interval=[Time interval for changing the FSS sealing key]:time interval' \
  40                 '--verify-key=[Specify FSS verification key]:FSS key' \
  41                 {-h,--help}'[Show this help]' \
  42                 '--version[Show package version]' \
  43                 '--new-id128[Generate a new 128 Bit ID]' \
  44                 '--header[Show journal header information]' \
  45                 '--disk-usage[Show total disk usage]' \
  46                 {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
  47                 '--setup-keys[Generate new FSS key pair]' \
  48                 '--verify[Verify journal file consistency]' \
  49                 '--list-catalog[List messages in catalog]' \
  50                 '--update-catalog[Update binary catalog database]' \
  51                 '*::default: _journal_none'
  52         ;;
  53         localectl)
  54             _arguments \
  55                 {-h,--help}'[Show this help]' \
  56                 '--version[Show package version]' \
  57                 "--no-convert[Don't convert keyboard mappings]" \
  58                 '--no-pager[Do not pipe output into a pager]' \
  59                 '--no-ask-password[Do not prompt for password]' \
  60                 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
  61                 '*::localectl commands:_localectl_command'
  62         ;;
  63         systemd-coredumpctl)
  64             _arguments \
  65                 {-o,--output=}'[Write output to FILE]:output file:_files' \
  66                 '--no-pager[Do not pipe output into a pager]' \
  67                 {-h,--help}'[Show this help]' \
  68                 '--version[Show package version]' \
  69                 '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
  70
  71         ;;
  72         timedatectl)
  73             _arguments -s \
  74                 {-h,--help}'[Show this help]' \
  75                 '--version[Show package version]' \
  76                 '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
  77                 '--no-pager[Do not pipe output into a pager]' \
  78                 '--no-ask-password[Do not prompt for password]' \
  79                 {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
  80                 '*::timedatectl commands:_timedatectl_command'
  81         ;;
  82         udevadm)
  83             _arguments \
  84                 '--debug[Print debug messages to stderr]' \
  85                 '--version[Print version number]' \
  86                 '--help[Print help text]' \
  87                 '*::udevadm commands:_udevadm_command'
  88         ;;
  89         systemd-analyze)
  90             _arguments \
  91                 {-h,--help}'[Show help text.]' \
  92                 '--user[Shows performance data of user sessions instead of the system manager.]' \
  93                 '--order[When generating graph for dot, show only order]' \
  94                 '--require[When generating graph for dot, show only requirement]' \
  95                 '*::systemd-analyze commands:_systemd_analyze_command'
  96         ;;
  97         systemd-ask-password)
  98             _arguments \
  99                 {-h,--help}'[Show this help]' \
 100                 '--icon=[Icon name]' \
 101                 '--timeout=[Timeout in sec]' \
 102                 '--no-tty[Ask question via agent even on TTY]' \
 103                 '--accept-cached[Accept cached passwords]' \
 104                 '--multiple[List multiple passwords if available]'
 105         ;;
 106         systemd-cat)
 107             _arguments \
 108                 {-h,--help}'[Show this help]' \
 109                 '--version[Show package version.]' \
 110                 {-t,--identifier=}'[Set syslog identifier.]' \
 111                 {-p,--priority=}'[Set priority value.]:value:({0..7})' \
 112                 '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
 113                 ':Message'
 114         ;;
 115         systemd-cgls)
 116             _arguments \
 117                 {-h,--help}'[Show this help]' \
 118                 '--version[Show package version]' \
 119                 '--no-pager[Do not pipe output into a pager]' \
 120                 {-a,--all}'[Show all groups, including empty]' \
 121                 '-k[Include kernel threads in output]' \
 122                 ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
 123         ;;
 124         systemd-cgtop)
 125             _arguments \
 126                 {-h,--help}'[Show this help]' \
 127                 '--version[Print version and exit]' \
 128                 '(-c -m -i -t)-p[Order by path]' \
 129                 '(-c -p -m -i)-t[Order by number of tasks]' \
 130                 '(-m -p -i -t)-c[Order by CPU load]' \
 131                 '(-c -p -i -t)-m[Order by memory load]' \
 132                 '(-c -m -p -t)-i[Order by IO load]' \
 133                 {-d,--delay=}'[Specify delay]' \
 134                 {-n,--iterations=}'[Run for N iterations before exiting]' \
 135                 {-b,--batch}'[Run in batch mode, accepting no input]' \
 136                 '--depth=[Maximum traversal depth]'
 137         ;;
 138         systemd-delta)
 139             _arguments \
 140                 {-h,--help}'[Show this help]' \
 141                 '--version[Show package version]' \
 142                 '--no-pager[Do not pipe output into a pager]' \
 143                 '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
 144                 {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
 145                 ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
 146         ;;
 147         systemd-detect-virt)
 148             _arguments \
 149                 {-h,--help}'[Show this help]' \
 150                 '--version[Show package version]' \
 151                 {-c,--container}'[Only detect whether we are run in a container]' \
 152                 {-v,--vm}'[Only detect whether we are run in a VM]' \
 153                 {-q,--quiet}"[Don't output anything, just set return value]"
 154         ;;
 155         systemd-inhibit)
 156             _arguments \
 157                 {-h,--help}'[Show this help]' \
 158                 '--version[Show package version]' \
 159                 '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
 160                 '--who=[A descriptive string who is inhibiting]' \
 161                 '--why=[A descriptive string why is being inhibited]' \
 162                 '--mode=[One of block or delay]' \
 163                 '--list[List active inhibitors]' \
 164                 '*:commands:_systemd_inhibit_command'
 165         ;;
 166         systemd-machine-id-setup)
 167             _arguments \
 168                 {-h,--help}'[Show this help]' \
 169                 '--version[Show package version]'
 170         ;;
 171         systemd-notify)
 172             _arguments \
 173                 {-h,--help}'[Show this help]' \
 174                 '--version[Show package version]' \
 175                 '--ready[Inform the init system about service start-up completion.]' \
 176                 '--pid=[Inform the init system about the main PID of the daemon]' \
 177                 '--status=[Send a free-form status string for the daemon to the init systemd]' \
 178                 '--booted[Returns 0 if the system was booted up with systemd]' \
 179                 '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
 180         ;;
 181         systemd-nspawn)
 182             _arguments \
 183                 {-h,--help}'[Show this help]' \
 184                 {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
 185                 {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
 186                 {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
 187                 '--uuid=[Set the specified uuid for the container.]' \
 188                 {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
 189                 '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
 190                 '--read-only[Mount the root file system read only for the container.]' \
 191                 '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
 192                 "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
 193                 '-j[Equivalent to --link-journal=guest.]'
 194         ;;
 195         systemd-tmpfiles)
 196             _arguments \
 197                 '--create[Create, set ownership/permissions based on the config files.]' \
 198                 '--clean[Clean up all files and directories with an age parameter configured.]' \
 199                 '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
 200                 '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
 201                 '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
 202                 '--help[Prints a short help text and exits.]' \
 203                 '*::files:_files'
 204         ;;
 205         systemd-tty-ask-password-agent)
 206             _arguments \
 207                 {-h,--help}'[Prints a short help text and exits.]' \
 208                 '--version[Prints a short version string and exits.]' \
 209                 '--list[Lists all currently pending system password requests.]' \
 210                 '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
 211                 '--watch[Continuously process password requests.]' \
 212                 '--wall[Forward password requests to wall(1).]' \
 213                 '--plymouth[Ask question with plymouth(8).]' \
 214                 '--console[Ask question on /dev/console.]'
 215         ;;
 216         machinectl)
 217             _arguments \
 218                 {-h,--help}'[Prints a short help text and exits.]' \
 219                 '--version[Prints a short version string and exits.]' \
 220                 {-p,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \
 221                 {-a,--all}'[Show all proerties]' \
 222                 (-l,--full)'[Do not ellipsize cgroup members]' \
 223                 '--no-pager[Do not pipe output into a pager]' \
 224                 '--no-ask-password[Do not ask for system passwords]' \
 225                 '--kill-who=[Who to send signal to]:killwho:(leader all)' \
 226                 {-s,--signal=}'[Which signal to send]:signal:_signals' \
 227                 {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
 228                 {-P,--privileged}'[Acquire privileges before execution]' \
 229                 '*::machinectl command:_machinectl_command'
 230         ;;
 231         *) _message 'eh?' ;;
 232     esac
 233 }
 234
 235 _systemd-nspawn(){
 236     local -a _caps
 237     _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
 238             CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
 239             CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
 240             CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
 241             CAP_SYS_RESOURCE CAP_SYS_BOOT )
 242     _values -s , 'capabilities' "$_caps[@]"
 243 }
 244
 245 _systemd_inhibit_command(){
 246     if (( CURRENT == 1 )); then
 247         compset -q
 248         _normal
 249     else
 250         local n=${words[(b:2:i)[^-]*]}
 251         if (( n <= CURRENT )); then
 252             compset -n $n
 253             _alternative \
 254                 'files:file:_files' \
 255                 'commands:command:_normal' && return 0
 256         fi
 257         _default
 258     fi
 259
 260 }
 261
 262 _systemd_analyze_command(){
 263     local -a _systemd_analyze_cmds
 264     # Descriptions taken from systemd-analyze --help.
 265     _systemd_analyze_cmds=(
 266         'time:Print time spent in the kernel before reaching userspace'
 267         'blame:Print list of running units ordered by time to init'
 268         'critical-chain:Print a tree of the time critical chain of units'
 269         'plot:Output SVG graphic showing service initialization'
 270         'dot:Dump dependency graph (in dot(1) format)'
 271     )
 272
 273     if (( CURRENT == 1 )); then
 274         _describe "options" _systemd_analyze_cmds
 275     else
 276         _message "no more options"
 277     fi
 278 }
 279
 280 _hosts_or_user_at_host()
 281 {
 282   _alternative \
 283     'users-hosts:: _user_at_host' \
 284     'hosts:: _hosts'
 285 }
 286
 287 _outputmodes() {
 288     local -a _output_opts
 289     _output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
 290     _describe -t output 'output mode' _output_opts || compadd "$@"
 291 }
 292
 293 _list_fields() {
 294     local -a journal_fields
 295     journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
 296                     ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
 297                     _{P,U,G}ID _COMM _EXE _CMDLINE
 298                     _AUDIT_{SESSION,LOGINUID}
 299                     _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
 300                     _SYSTEMD_USER_UNIT
 301                     _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
 302                     _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
 303                     _KERNEL_{DEVICE,SUBSYSTEM}
 304                     _UDEV_{SYSNAME,DEVNODE,DEVLINK}
 305                     __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
 306     _describe 'possible fields' journal_fields
 307 }
 308
 309 _journal_none() {
 310     local -a _commands _files
 311     _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
 312     _alternative : \
 313         'files:/dev files:_files -W /dev -P /dev/' \
 314         "commands:commands:($_commands[@])" \
 315         'fields:fields:_list_fields'
 316 }
 317
 318 _journal_fields() {
 319     local -a _fields cmd
 320     cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
 321     _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
 322     typeset -U _fields
 323     _describe 'possible values' _fields
 324 }
 325
 326 _hostnamectl_command() {
 327     local -a _hostnamectl_cmds
 328     _hostnamectl_cmds=(
 329         "status:Show current hostname settings"
 330         "set-hostname:Set system hostname"
 331         "set-icon-name:Set icon name for host"
 332     )
 333     if (( CURRENT == 1 )); then
 334         _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
 335     else
 336         local curcontext="$curcontext"
 337         cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
 338         if (( $#cmd )); then
 339             [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
 340             _message "$msg"
 341         else
 342             _message "unknown hostnamectl command: $words[1]"
 343         fi
 344     fi
 345 }
 346
 347 _localectl_set-locale() {
 348     local -a _confs _locales
 349     local expl suf
 350     _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
 351     _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
 352     if [[ -prefix 1 *\= ]]; then
 353         local conf=${PREFIX%%\=*}
 354         compset -P1 '*='
 355         _wanted locales expl "locales configs" \
 356             _combination localeconfs  confs=$conf locales "$@" -
 357     else
 358         compadd -S '='  $_confs
 359     fi
 360 }
 361
 362 _localectl_set-keymap() {
 363     local -a _keymaps
 364     _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
 365     if (( CURRENT <= 3 )); then
 366         _describe keymaps _keymaps
 367     else
 368         _message "no more options"
 369     fi
 370 }
 371
 372 _localectl_set-x11-keymap() {
 373     if (( $+commands[pkg-config] )); then
 374         local -a _file _layout _model _variant _options
 375         local _xorg_lst
 376         _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
 377         _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
 378         _layout=( ${${${(M)${(f)_file[1]}:#  *}#  }%% *} )
 379         _model=( ${${${(M)${(f)_file[2]}:#  *}#  }%% *} )
 380         _variant=( ${${${(M)${(f)_file[3]}:#  *}#  }%% *} )
 381         _options=( ${${${(M)${(f)_file[4]}:#  *}#  }%% *} )
 382         #_layout=( ${(f)"$( echo $_file[1] | awk '/^  / {print $1}' )"} )
 383         #_model=( ${(f)"$(echo $_file[2] | awk '/^  / {print $1}')"} )
 384         #_variant=( ${(f)"$(echo $_file[3] | awk '/^  / {print $1}')"} )
 385         #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^  / {print $1}')"} )
 386
 387         case $CURRENT in
 388             2) _describe layouts _layout ;;
 389             3) _describe models _model;;
 390             4) _describe variants _variant;;
 391             5) _describe options _options;;
 392             *) _message "no more options"
 393         esac
 394     fi
 395 }
 396
 397
 398 _localectl_command() {
 399     local -a _localectl_cmds
 400     _localectl_cmds=(
 401         'status:Show current locale settings'
 402         'set-locale:Set system locale'
 403         'list-locales:Show known locales'
 404         'set-keymap:Set virtual console keyboard mapping'
 405         'list-keymaps:Show known virtual console keyboard mappings'
 406         'set-x11-keymap:Set X11 keyboard mapping'
 407     )
 408     if (( CURRENT == 1 )); then
 409         _describe -t commands 'localectl command' _localectl_cmds
 410     else
 411         local curcontext="$curcontext"
 412         cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
 413         if (( $+functions[_localectl_$cmd] )); then
 414             _localectl_$cmd
 415         else
 416             _message "no more options"
 417         fi
 418     fi
 419 }
 420
 421 _timedatectl_set-timezone(){
 422     local -a _timezones
 423     _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
 424     compadd "$_timezones[@]"
 425 }
 426
 427 _timedatectl_set-time(){
 428     _message "YYYY-MM-DD HH:MM:SS"
 429 }
 430
 431 _timedatectl_set-local-rtc(){
 432     local -a _options
 433     _options=(
 434         '0:Maintain RTC in universal time'
 435         '1:Maintain RTC in local time'
 436     )
 437     _describe options _options
 438 }
 439
 440 _timedatectl_set-ntp(){
 441     local -a _options
 442     _options=(
 443         '0:Disable NTP based network time configuration'
 444         '1:Enable NTP based network time configuration'
 445     )
 446     _describe options _options
 447 }
 448
 449 _timedatectl_command(){
 450     local -a _timedatectl_cmds
 451     _timedatectl_cmds=(
 452         'status:Show current time settings'
 453         'set-time:Set system time'
 454         'set-timezone:Set system timezone'
 455         'list-timezones:Show known timezones'
 456         'set-local-rtc:Control whether RTC is in local time'
 457         'set-ntp:Control whether NTP is enabled'
 458     )
 459     if (( CURRENT == 1 )); then
 460         _describe -t commands 'timedatectl command' _timedatectl_cmds
 461     else
 462         local curcontext="$curcontext"
 463         cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
 464         if (( $#cmd )); then
 465             if (( $+functions[_timedatectl_$cmd] )); then
 466                 _timedatectl_$cmd
 467             else
 468                 _message "no more options"
 469             fi
 470         else
 471             _message "unknown timedatectl command: $words[1]"
 472         fi
 473     fi
 474 }
 475 _systemd-coredumpctl_command(){
 476     local -a _systemd_coredumpctl_cmds
 477     _systemd_coredumpctl_cmds=(
 478             'list:List available coredumps'
 479             'dump:Print coredump to std'
 480     )
 481     if (( CURRENT == 1 )); then
 482         _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
 483     else
 484         local curcontext="$curcontext"
 485         local -a _dumps
 486         cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
 487         if (( $#cmd  )); then
 488                         # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
 489                         _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
 490             if [[ -n "$_dumps" ]]; then
 491                 _describe -t pids 'coredumps' _dumps
 492             else
 493                 _message "no coredumps"
 494             fi
 495         else
 496             _message "no more options"
 497         fi
 498
 499     fi
 500
 501 }
 502
 503 (( $+functions[_machinectl_command] )) || _machinectl_command()
 504 {
 505   local -a _machinectl_cmds
 506   _machinectl_cmds=(
 507     "list:List currently running VMs/containers"
 508     "status:Show VM/container status"
 509     "show:Show properties of one or more VMs/containers"
 510     "terminate:Terminate one or more VMs/containers"
 511     "kill:Send signal to process or a VM/container"
 512   )
 513   if (( CURRENT == 1 )); then
 514     _describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@"
 515   else
 516     local curcontext="$curcontext"
 517     cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}"
 518     if (( $#cmd )); then
 519       case $cmd in
 520         list) msg="no options" ;;
 521         *)
 522           _machines=( "${(foa)$(machinectl list | awk '{print $1}')}" )
 523           if [[ -n "$_machines" ]]; then
 524             _describe 'machines' _machines
 525           else
 526             _message 'no machines'
 527           fi
 528       esac
 529     else
 530       _message "no more options"
 531     fi
 532   fi
 533 }
 534
 535 _udevadm_info(){
 536     _arguments \
 537         '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
 538         '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
 539         '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
 540         '--root[Print absolute paths in name or symlink query.]' \
 541         '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
 542         '--export[Print output as key/value pairs.]' \
 543         '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
 544         '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
 545         '--export-db[Export the content of the udev database.]' \
 546         '--cleanup-db[Cleanup the udev database.]'
 547 }
 548
 549 _udevadm_trigger(){
 550     _arguments \
 551         '--verbose[Print the list of devices which will be triggered.]' \
 552         '--dry-run[Do not actually trigger the event.]' \
 553         '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
 554         '--action=[Type of event to be triggered.]:actions:(add change remove)' \
 555         '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
 556         '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
 557         '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
 558         '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
 559         '--property-match=[Trigger events for devices with a matching property value.]' \
 560         '--tag-match=property[Trigger events for devices with a matching tag.]' \
 561         '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
 562         '--parent-match=[Trigger events for all children of a given device.]'
 563 }
 564
 565 _udevadm_settle(){
 566     _arguments \
 567        '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
 568        '--seq-start=[Wait only for events after the given sequence number.]' \
 569        '--seq-end=[Wait only for events before the given sequence number.]' \
 570        '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
 571        '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
 572        '--help[Print help text.]'
 573 }
 574
 575 _udevadm_control(){
 576     _arguments \
 577         '--exit[Signal and wait for systemd-udevd to exit.]' \
 578         '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
 579         '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
 580         '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
 581         '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
 582         '--property=[Set a global property for all events.]' \
 583         '--children-max=[Set the maximum number of events.]' \
 584         '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
 585         '--help[Print help text.]'
 586 }
 587
 588 _udevadm_monitor(){
 589     _arguments \
 590         '--kernel[Print the kernel uevents.]' \
 591         '--udev[Print the udev event after the rule processing.]' \
 592         '--property[Also print the properties of the event.]' \
 593         '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
 594         '--tag-match=[Filter events by property.]' \
 595         '--help[Print help text.]'
 596 }
 597
 598 _udevadm_test(){
 599     _arguments \
 600         '--action=[The action string.]:actions:(add change remove)' \
 601         '--subsystem=[The subsystem string.]' \
 602         '--help[Print help text.]' \
 603         '*::devpath:_files -P /sys/ -W /sys'
 604 }
 605
 606 _udevadm_test-builtin(){
 607     if (( CURRENT == 2 )); then
 608     _arguments \
 609         '--help[Print help text]' \
 610         '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)'
 611     elif  (( CURRENT == 3 )); then
 612         _arguments \
 613             '--help[Print help text]' \
 614             '*::syspath:_files -P /sys -W /sys'
 615     else
 616         _arguments \
 617             '--help[Print help text]'
 618     fi
 619 }
 620
 621 _udevadm_mounts(){
 622   local dev_tmp dpath_tmp mp_tmp mline
 623
 624     tmp=( "${(@f)$(< /etc/mtab)}" )
 625     dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
 626     mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
 627
 628   local MATCH
 629   mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
 630   dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
 631   dev_tmp=( "${(@q)dev_tmp:#/*}" )
 632
 633   _alternative \
 634     'device-paths: device path:compadd -a dpath_tmp' \
 635     'directories:mount point:compadd -a mp_tmp'
 636 }
 637
 638
 639 _udevadm_command(){
 640     local -a _udevadm_cmds
 641     _udevadm_cmds=(
 642         'info:query sysfs or the udev database'
 643         'trigger:request events from the kernel'
 644         'settle:wait for the event queue to finish'
 645         'control:control the udev daemon'
 646         'monitor:listen to kernel and udev events'
 647         'test:test an event run'
 648         'test-builtin:test a built-in command'
 649     )
 650
 651     if ((CURRENT == 1)); then
 652         _describe -t commands 'udevadm commands' _udevadm_cmds
 653     else
 654         local curcontext="$curcontext"
 655         cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
 656         if (($#cmd)); then
 657             if (( $+functions[_udevadm_$cmd] )); then
 658                 _udevadm_$cmd
 659             else
 660                 _message "no options for $cmd"
 661             fi
 662         else
 663             _message "no more options"
 664         fi
 665     fi
 666 }
 667
 668 _ctls "$@"
 669
 670 #vim: set ft=zsh sw=4 ts=4 et