]> git.ipfire.org Git - thirdparty/systemd.git/commitdiff
Merge pull request #1934 from martinpitt/master
authorTom Gundersen <teg@jklm.no>
Thu, 3 Dec 2015 17:22:06 +0000 (18:22 +0100)
committerTom Gundersen <teg@jklm.no>
Thu, 3 Dec 2015 17:22:06 +0000 (18:22 +0100)
tests: add networkd integration test

Makefile.am
test/networkd-test.py [new file with mode: 0755]

index 29c7f322ea0ca1f124e3e592843f2539d5670ae7..edae4a309b726e74078f9851730d1262ef1a8803 100644 (file)
@@ -5474,7 +5474,8 @@ endif
 
 EXTRA_DIST += \
        units/systemd-networkd.service.m4.in \
-       units/systemd-networkd-wait-online.service.in
+       units/systemd-networkd-wait-online.service.in \
+       test/networkd-test.py
 
 # ------------------------------------------------------------------------------
 if ENABLE_LOGIND
diff --git a/test/networkd-test.py b/test/networkd-test.py
new file mode 100755 (executable)
index 0000000..d76ab50
--- /dev/null
@@ -0,0 +1,371 @@
+#!/usr/bin/env python3
+#
+# networkd integration test
+# This uses temporary configuration in /run and temporary veth devices, and
+# does not write anything on disk or change any system configuration;
+# but it assumes (and checks at the beginning) that networkd is not currently
+# running.
+# This can be run on a normal installation, in QEMU, nspawn, or LXC.
+# ATTENTION: This uses the *installed* networkd, not the one from the built
+# source tree.
+#
+# (C) 2015 Canonical Ltd.
+# Author: Martin Pitt <martin.pitt@ubuntu.com>
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+
+# systemd is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with systemd; If not, see <http://www.gnu.org/licenses/>.
+
+import os
+import sys
+import time
+import unittest
+import tempfile
+import subprocess
+import shutil
+
+networkd_active = subprocess.call(['systemctl', 'is-active', '--quiet',
+                                   'systemd-networkd']) == 0
+have_dnsmasq = shutil.which('dnsmasq')
+
+
+@unittest.skipIf(networkd_active,
+                 'networkd is already active')
+class ClientTestBase:
+    def setUp(self):
+        self.iface = 'test_eth42'
+        self.if_router = 'router_eth42'
+        self.workdir_obj = tempfile.TemporaryDirectory()
+        self.workdir = self.workdir_obj.name
+        self.config = '/run/systemd/network/test_eth42.network'
+        os.makedirs(os.path.dirname(self.config), exist_ok=True)
+
+        # avoid "Failed to open /dev/tty" errors in containers
+        os.environ['SYSTEMD_LOG_TARGET'] = 'journal'
+
+        # determine path to systemd-networkd-wait-online
+        for p in ['/usr/lib/systemd/systemd-networkd-wait-online',
+                  '/lib/systemd/systemd-networkd-wait-online']:
+            if os.path.exists(p):
+                self.networkd_wait_online = p
+                break
+        else:
+            self.fail('systemd-networkd-wait-online not found')
+
+        # get current journal cursor
+        out = subprocess.check_output(['journalctl', '-b', '--quiet',
+                                       '--no-pager', '-n0', '--show-cursor'],
+                                      universal_newlines=True)
+        self.assertTrue(out.startswith('-- cursor:'))
+        self.journal_cursor = out.split()[-1]
+
+    def tearDown(self):
+        self.shutdown_iface()
+        if os.path.exists(self.config):
+            os.unlink(self.config)
+        subprocess.call(['systemctl', 'stop', 'systemd-networkd'])
+
+    def show_journal(self, unit):
+        '''Show journal of given unit since start of the test'''
+
+        print('---- %s ----' % unit)
+        sys.stdout.flush()
+        subprocess.call(['journalctl', '-b', '--no-pager', '--quiet',
+                         '--cursor', self.journal_cursor, '-u', unit])
+
+    def create_iface(self, ipv6=False):
+        '''Create test interface with DHCP server behind it'''
+
+        raise NotImplementedError('must be implemented by a subclass')
+
+    def shutdown_iface(self):
+        '''Remove test interface and stop DHCP server'''
+
+        raise NotImplementedError('must be implemented by a subclass')
+
+    def print_server_log(self):
+        '''Print DHCP server log for debugging failures'''
+
+        raise NotImplementedError('must be implemented by a subclass')
+
+    def do_test(self, coldplug=True, ipv6=False, extra_opts='',
+                online_timeout=10, dhcp_mode='yes'):
+        with open(self.config, 'w') as f:
+            f.write('''[Match]
+Name=%s
+[Network]
+DHCP=%s
+%s''' % (self.iface, dhcp_mode, extra_opts))
+
+        if coldplug:
+            # create interface first, then start networkd
+            self.create_iface(ipv6=ipv6)
+            subprocess.check_call(['systemctl', 'start', 'systemd-networkd'])
+        else:
+            # start networkd first, then create interface
+            subprocess.check_call(['systemctl', 'start', 'systemd-networkd'])
+            self.create_iface(ipv6=ipv6)
+
+        try:
+            subprocess.check_call([self.networkd_wait_online, '--interface',
+                                   self.iface, '--timeout=%i' % online_timeout])
+
+            if ipv6:
+                # check iface state and IP 6 address; FIXME: we need to wait a bit
+                # longer, as the iface is "configured" already with IPv4 *or*
+                # IPv6, but we want to wait for both
+                for timeout in range(10):
+                    out = subprocess.check_output(['ip', 'a', 'show', 'dev', self.iface])
+                    if b'state UP' in out and b'inet6 2600' in out and b'inet 192.168' in out:
+                        break
+                    time.sleep(1)
+                else:
+                    self.fail('timed out waiting for IPv6 configuration')
+
+                self.assertRegex(out, b'inet6 2600::.* scope global .*dynamic')
+                self.assertRegex(out, b'inet6 fe80::.* scope link')
+            else:
+                # should have link-local address on IPv6 only
+                out = subprocess.check_output(['ip', '-6', 'a', 'show', 'dev', self.iface])
+                self.assertRegex(out, b'inet6 fe80::.* scope link')
+                self.assertNotIn(b'scope global', out)
+
+            # should have IPv4 address
+            out = subprocess.check_output(['ip', '-4', 'a', 'show', 'dev', self.iface])
+            self.assertIn(b'state UP', out)
+            self.assertRegex(out, b'inet 192.168.5.\d+/.* scope global dynamic')
+
+            # check networkctl state
+            out = subprocess.check_output(['networkctl'])
+            self.assertRegex(out, ('%s\s+ether\s+routable\s+unmanaged' % self.if_router).encode())
+            self.assertRegex(out, ('%s\s+ether\s+routable\s+configured' % self.iface).encode())
+
+            out = subprocess.check_output(['networkctl', 'status', self.iface])
+            self.assertRegex(out, b'Type:\s+ether')
+            self.assertRegex(out, b'State:\s+routable.*configured')
+            self.assertRegex(out, b'Address:\s+192.168.5.\d+')
+            if ipv6:
+                self.assertRegex(out, b'2600::')
+            else:
+                self.assertNotIn(b'2600::', out)
+            self.assertRegex(out, b'fe80::')
+            self.assertRegex(out, b'Gateway:\s+192.168.5.1')
+            self.assertRegex(out, b'DNS:\s+192.168.5.1')
+        except (AssertionError, subprocess.CalledProcessError):
+            # show networkd status, journal, and DHCP server log on failure
+            with open(self.config) as f:
+                print('\n---- %s ----\n%s' % (self.config, f.read()))
+            print('---- interface status ----')
+            sys.stdout.flush()
+            subprocess.call(['ip', 'a', 'show', 'dev', self.iface])
+            print('---- networkctl status %s ----' % self.iface)
+            sys.stdout.flush()
+            subprocess.call(['networkctl', 'status', self.iface])
+            self.show_journal('systemd-networkd.service')
+            self.print_server_log()
+            raise
+
+        # verify resolv.conf if it gets dynamically managed
+        if os.path.islink('/etc/resolv.conf'):
+            for timeout in range(50):
+                with open('/etc/resolv.conf') as f:
+                    contents = f.read()
+                if 'nameserver 192.168.5.1\n' in contents:
+                    break
+                # resolv.conf can have at most three nameservers; if we already
+                # have three different ones, that's also okay
+                if contents.count('nameserver ') >= 3:
+                    break
+                time.sleep(0.1)
+            else:
+                self.fail('nameserver 192.168.5.1 not found in /etc/resolv.conf')
+
+        if not coldplug:
+            # check post-down.d hook
+            self.shutdown_iface()
+
+    def test_coldplug_dhcp_yes_ip4(self):
+        # we have a 12s timeout on RA, so we need to wait longer
+        self.do_test(coldplug=True, ipv6=False, online_timeout=15)
+
+    def test_coldplug_dhcp_yes_ip4_no_ra(self):
+        # with disabling RA explicitly things should be fast
+        self.do_test(coldplug=True, ipv6=False,
+                     extra_opts='IPv6AcceptRouterAdvertisements=False')
+
+    def test_coldplug_dhcp_ip4_only(self):
+        # we have a 12s timeout on RA, so we need to wait longer
+        self.do_test(coldplug=True, ipv6=False, dhcp_mode='ipv4',
+                     online_timeout=15)
+
+    def test_coldplug_dhcp_ip4_only_no_ra(self):
+        # with disabling RA explicitly things should be fast
+        self.do_test(coldplug=True, ipv6=False, dhcp_mode='ipv4',
+                     extra_opts='IPv6AcceptRouterAdvertisements=False')
+
+    def test_coldplug_dhcp_ip6(self):
+        self.do_test(coldplug=True, ipv6=True)
+
+    def test_hotplug_dhcp_ip4(self):
+        # With IPv4 only we have a 12s timeout on RA, so we need to wait longer
+        self.do_test(coldplug=False, ipv6=False, online_timeout=15)
+
+    def test_hotplug_dhcp_ip6(self):
+        self.do_test(coldplug=False, ipv6=True)
+
+
+@unittest.skipUnless(have_dnsmasq, 'dnsmasq not installed')
+class DnsmasqClientTest(ClientTestBase, unittest.TestCase):
+    '''Test networkd client against dnsmasq'''
+
+    def setUp(self):
+        super().setUp()
+        self.dnsmasq = None
+
+    def create_iface(self, ipv6=False):
+        '''Create test interface with DHCP server behind it'''
+
+        # add veth pair
+        subprocess.check_call(['ip', 'link', 'add', 'name', self.iface, 'type',
+                               'veth', 'peer', 'name', self.if_router])
+
+        # give our router an IP
+        subprocess.check_call(['ip', 'a', 'flush', 'dev', self.if_router])
+        subprocess.check_call(['ip', 'a', 'add', '192.168.5.1/24', 'dev', self.if_router])
+        if ipv6:
+            subprocess.check_call(['ip', 'a', 'add', '2600::1/64', 'dev', self.if_router])
+        subprocess.check_call(['ip', 'link', 'set', self.if_router, 'up'])
+
+        # add DHCP server
+        self.dnsmasq_log = os.path.join(self.workdir, 'dnsmasq.log')
+        lease_file = os.path.join(self.workdir, 'dnsmasq.leases')
+        if ipv6:
+            extra_opts = ['--enable-ra', '--dhcp-range=2600::10,2600::20']
+        else:
+            extra_opts = []
+        self.dnsmasq = subprocess.Popen(
+            ['dnsmasq', '--keep-in-foreground', '--log-queries',
+             '--log-facility=' + self.dnsmasq_log, '--conf-file=/dev/null',
+             '--dhcp-leasefile=' + lease_file, '--bind-interfaces',
+             '--interface=' + self.if_router, '--except-interface=lo',
+             '--dhcp-range=192.168.5.10,192.168.5.200'] + extra_opts)
+
+    def shutdown_iface(self):
+        '''Remove test interface and stop DHCP server'''
+
+        if self.if_router:
+            subprocess.check_call(['ip', 'link', 'del', 'dev', self.if_router])
+            self.if_router = None
+        if self.dnsmasq:
+            self.dnsmasq.kill()
+            self.dnsmasq.wait()
+            self.dnsmasq = None
+
+    def print_server_log(self):
+        '''Print DHCP server log for debugging failures'''
+
+        with open(self.dnsmasq_log) as f:
+            sys.stdout.write('\n\n---- dnsmasq log ----\n%s\n------\n\n' % f.read())
+
+
+class NetworkdClientTest(ClientTestBase, unittest.TestCase):
+    '''Test networkd client against networkd server'''
+
+    def setUp(self):
+        super().setUp()
+        self.dnsmasq = None
+
+    def create_iface(self, ipv6=False):
+        '''Create test interface with DHCP server behind it'''
+
+        # run "router-side" networkd in own mount namespace to shield it from
+        # "client-side" configuration and networkd
+        (fd, script) = tempfile.mkstemp(prefix='networkd-router.sh')
+        self.addCleanup(os.remove, script)
+        with os.fdopen(fd, 'w+') as f:
+            f.write('''#!/bin/sh -eu
+mkdir -p /run/systemd/network
+mkdir -p /run/systemd/netif
+mount -t tmpfs none /run/systemd/network
+mount -t tmpfs none /run/systemd/netif
+[ ! -e /run/dbus ] || mount -t tmpfs none /run/dbus
+# create router/client veth pair
+cat << EOF > /run/systemd/network/test.netdev
+[NetDev]
+Name=%(ifr)s
+Kind=veth
+
+[Peer]
+Name=%(ifc)s
+EOF
+
+cat << EOF > /run/systemd/network/test.network
+[Match]
+Name=%(ifr)s
+
+[Network]
+Address=192.168.5.1/24
+%(addr6)s
+DHCPServer=yes
+
+[DHCPServer]
+PoolOffset=10
+PoolSize=50
+DNS=192.168.5.1
+EOF
+
+# run networkd as in systemd-networkd.service
+exec $(systemctl cat systemd-networkd.service | sed -n '/^ExecStart=/ { s/^.*=//; p}')
+''' % {'ifr': self.if_router, 'ifc': self.iface, 'addr6': ipv6 and 'Address=2600::1/64' or ''})
+
+            os.fchmod(fd, 0o755)
+
+        subprocess.check_call(['systemd-run', '--unit=networkd-test-router.service',
+                               '-p', 'InaccessibleDirectories=-/etc/systemd/network',
+                               '-p', 'InaccessibleDirectories=-/run/systemd/network',
+                               '-p', 'InaccessibleDirectories=-/run/systemd/netif',
+                               '--service-type=notify', script])
+
+        # wait until devices got created
+        for timeout in range(50):
+            out = subprocess.check_output(['ip', 'a', 'show', 'dev', self.if_router])
+            if b'state UP' in out and b'scope global' in out:
+                break
+            time.sleep(0.1)
+
+    def shutdown_iface(self):
+        '''Remove test interface and stop DHCP server'''
+
+        if self.if_router:
+            subprocess.check_call(['systemctl', 'stop', 'networkd-test-router.service'])
+            # ensure failed transient unit does not stay around
+            subprocess.call(['systemctl', 'reset-failed', 'networkd-test-router.service'])
+            subprocess.call(['ip', 'link', 'del', 'dev', self.if_router])
+            self.if_router = None
+
+    def print_server_log(self):
+        '''Print DHCP server log for debugging failures'''
+
+        self.show_journal('networkd-test-router.service')
+
+    @unittest.skip('networkd does not have DHCPv6 server support')
+    def test_hotplug_dhcp_ip6(self):
+        pass
+
+    @unittest.skip('networkd does not have DHCPv6 server support')
+    def test_coldplug_dhcp_ip6(self):
+        pass
+
+
+if __name__ == '__main__':
+    unittest.main(testRunner=unittest.TextTestRunner(stream=sys.stdout,
+                                                     verbosity=2))