Andersen, Tom Gundersen, Torstein Husebø, Umut Tezduyar Lindskog, Vito
Caputo, WaLyong Cho, Yu Watanabe, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2016-02-11
+ — Berlin, 2016-02-11
CHANGES WITH 228:
Tom Gundersen, Torstein Husebø, Vito Caputo, Zbigniew
Jędrzejewski-Szmek
- -- Berlin, 2015-11-18
+ — Berlin, 2015-11-18
CHANGES WITH 227:
Andersen, Tom Gundersen, Tom Lyon, Viktar Vauchkevich,
Zbigniew Jędrzejewski-Szmek, Марко М. Костић
- -- Berlin, 2015-10-07
+ — Berlin, 2015-10-07
CHANGES WITH 226:
Hack, Susant Sahani, Sylvain Pasche, Thomas Hindoe Paaboel
Andersen, Tom Gundersen, Torstein Husebø
- -- Berlin, 2015-09-08
+ — Berlin, 2015-09-08
CHANGES WITH 225:
Paaboel Andersen, Thomas Meyer, Tom Gundersen, Vincent Batts,
WaLyong Cho, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2015-08-27
+ — Berlin, 2015-08-27
CHANGES WITH 224:
Herrmann, Herman Fries, Johannes Nixdorf, Kay Sievers, Lennart
Poettering, Peter Hutterer, Susant Sahani, Tom Gundersen
- -- Berlin, 2015-07-31
+ — Berlin, 2015-07-31
CHANGES WITH 223:
Gundersen, Torstein Husebø, Umut Tezduyar Lindskog, Vito Caputo,
Vivenzio Pagliari, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2015-07-29
+ — Berlin, 2015-07-29
CHANGES WITH 222:
Susant Sahani, Thomas Hindoe Paaboel Andersen, Tom Gundersen, Torstein
Husebø, Vedran Miletić, WaLyong Cho, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2015-07-07
+ — Berlin, 2015-07-07
CHANGES WITH 221:
Husebø, Umut Tezduyar Lindskog, Viktar Vauchkevich, Werner
Fink, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2015-06-19
+ — Berlin, 2015-06-19
CHANGES WITH 220:
Gundersen, Torstein Husebø, Umut Tezduyar Lindskog, Will
Woods, Zachary Cook, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2015-05-22
+ — Berlin, 2015-05-22
CHANGES WITH 219:
Lindskog, Veres Lajos, Vincent Batts, WaLyong Cho, Wieland
Hoffmann, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2015-02-16
+ — Berlin, 2015-02-16
CHANGES WITH 218:
Torstein Husebø, Umut Tezduyar Lindskog, Vicente Olivert
Riera, WaLyong Cho, Wesley Dawson, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2014-12-10
+ — Berlin, 2014-12-10
CHANGES WITH 217:
Husebø, Umut Tezduyar Lindskog, WaLyong Cho, Zbigniew
Jędrzejewski-Szmek
- -- Berlin, 2014-10-28
+ — Berlin, 2014-10-28
CHANGES WITH 216:
Tobias Geerinckx-Rice, Tomasz Torcz, Tom Gundersen, Umut
Tezduyar Lindskog, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2014-08-19
+ — Berlin, 2014-08-19
CHANGES WITH 215:
Paaboel Andersen, Tom Gundersen, Tom Hirst, Umut Tezduyar
Lindskog, Uoti Urpala, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2014-07-03
+ — Berlin, 2014-07-03
CHANGES WITH 214:
Andersen, Tom Gundersen, Umut Tezduyar Lindskog, Zbigniew
Jędrzejewski-Szmek
- -- Berlin, 2014-06-11
+ — Berlin, 2014-06-11
CHANGES WITH 213:
Lindskog, WaLyong Cho, Will Woods, Zbigniew
Jędrzejewski-Szmek
- -- Beijing, 2014-05-28
+ — Beijing, 2014-05-28
CHANGES WITH 212:
Umut Tezduyar Lindskog, Wieland Hoffmann, Zbigniew
Jędrzejewski-Szmek
- -- Berlin, 2014-03-25
+ — Berlin, 2014-03-25
CHANGES WITH 211:
Gundersen, Umut Tezduyar Lindskog, Uoti Urpala, Zachary Cook,
Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2014-03-12
+ — Berlin, 2014-03-12
CHANGES WITH 210:
Paaboel Andersen, Tom Gundersen, Umut Tezduyar Lindskog,
Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2014-02-24
+ — Berlin, 2014-02-24
CHANGES WITH 209:
Pavlín, Vincent Batts, WaLyong Cho, William Giokas, Yang
Zhiyong, Yin Kangkai, Yuxuan Shui, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2014-02-20
+ — Berlin, 2014-02-20
CHANGES WITH 208:
Michael Scherer, Michał Górny, Mike Gilbert, Patrick McCarty,
Sebastian Ott, Tom Gundersen, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2013-10-02
+ — Berlin, 2013-10-02
CHANGES WITH 207:
Paaboel Andersen, Tom Gundersen, Umut Tezduyar, WANG Chao,
William Giokas, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2013-09-13
+ — Berlin, 2013-09-13
CHANGES WITH 206:
Thomas H.P. Andersen, Tom Gundersen, Tomasz Torcz, William
Giokas, Zbigniew Jędrzejewski-Szmek
- -- Berlin, 2013-07-23
+ — Berlin, 2013-07-23
CHANGES WITH 205:
* Two new unit types have been introduced:
Scope units are very similar to service units, however, are
- created out of pre-existing processes -- instead of PID 1
+ created out of pre-existing processes — instead of PID 1
forking off the processes. By using scope units it is
possible for system services and applications to group their
own child processes (worker processes) in a powerful way
* systemd-inhibit: make taking delay locks useful: support sending SIGINT or SIGTERM on PrepareForSleep()
-* remove any syslog support from log.c -- we probably cannot do this before split-off udev is gone for good
+* remove any syslog support from log.c — we probably cannot do this before split-off udev is gone for good
* shutdown logging: store to EFI var, and store to USB stick?
bus-activatable by supplying a D-Bus service activation
configuration file. This has multiple advantages: your daemon
may be started lazily on-demand; it may be started in parallel
- to other daemons requiring it -- which maximizes
+ to other daemons requiring it — which maximizes
parallelization and boot-up speed; your daemon can be
restarted on failure without losing any bus requests, as the
bus queues requests for activatable services. See below for
<constant>SD_EVENT_PRIORITY_IDLE</constant> (100) may be used to
indicate event sources that shall be dispatched early, normally or
late. It is recommended to specify priorities based on these
- definitions, and relative to them -- however, the full 64bit
+ definitions, and relative to them — however, the full 64bit
signed integer range is available for ordering event
sources.</para>
<function>sd_journal_enumerate_unique()</function>. This threshold
is a hint only: it indicates that the client program is interested
only in the initial parts of the data fields, up to the threshold
- in size -- but the library might still return larger data objects.
+ in size — but the library might still return larger data objects.
That means applications should not rely exclusively on this
setting to limit the size of the data fields returned, but need to
apply a explicit size limit on the returned data as well. This
processes.</para>
<para>The purpose of this tool is to query system-wide passwords
- -- that is passwords not attached to a specific user account.
+ — that is passwords not attached to a specific user account.
Examples include: unlocking encrypted hard disks when they are
plugged in or at boot, entering an SSL certificate passphrase for
web and VPN servers.</para>
<term><uri>boot</uri></term>
<listitem><para>Limit events to the current boot of the system
- (like <command>journalctl --this--boot</command>).</para></listitem>
+ (like <command>journalctl --this-boot</command>).</para></listitem>
</varlistentry>
<varlistentry>
host interface name and container interface name. The latter
may be omitted in which case the container and host sides will
be assigned the same name. This switch is independent of
- <option>--network-veth</option>, and -- in contrast -- may be
+ <option>--network-veth</option>, and — in contrast — may be
used multiple times, and allows configuration of the network
interface names. Note that <option>--network-bridge=</option>
has no effect on interfaces created with
defined what that is supposed to mean, with one exception:
at shutdown, a unit that is ordered after
<filename>network.target</filename> will be stopped before
- the network -- to whatever level it might be set up then --
+ the network — to whatever level it might be set up then —
is shut down. It is hence useful when writing service files
that require network access on shutdown, which should order
themselves after this target, but not pull it in. Also see
Copyright 2010 Lennart Poettering
Copyright (C) 2012 Roberto Sassu - Politecnico di Torino, Italy
- TORSEC group -- http://security.polito.it
+ TORSEC group — http://security.polito.it
systemd is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published by
Copyright 2010 Lennart Poettering
Copyright (C) 2012 Roberto Sassu - Politecnico di Torino, Italy
- TORSEC group -- http://security.polito.it
+ TORSEC group — http://security.polito.it
systemd is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published by
* cases. It doesn't work at all in
* containers, and outside of containers it
* can be confused easily by left-over
- * directories in the cgroup -- which however
+ * directories in the cgroup — which however
* should not exist in non-delegated units. On
* the unified hierarchy that's different,
* there we get proper events. Hence rely on
it. Specifically: given that PID 1 might block on
dbus-daemon during IPC, and dbus-daemon is logging to us,
and might hence block on us, we might end up in a deadlock
- if we block on sending PID 1 notification messages -- by
+ if we block on sending PID 1 notification messages — by
generating a full blocking circle. To avoid this, let's
create a non-blocking socket, and connect it to the
notification socket, and then wait for POLLOUT before we
if (major(devnum) > 0) {
assert(subsystem);
- /* use dev_t -- b259:131072, c254:0 */
+ /* use dev_t — b259:131072, c254:0 */
r = asprintf(&id, "%c%u:%u",
streq(subsystem, "block") ? 'b' : 'c',
major(devnum), minor(devnum));
if (r < 0)
return -ENOMEM;
} else if (ifindex > 0) {
- /* use netdev ifindex -- n3 */
+ /* use netdev ifindex — n3 */
r = asprintf(&id, "n%u", ifindex);
if (r < 0)
return -ENOMEM;
} else {
- /* use $subsys:$sysname -- pci:0000:00:1f.2
+ /* use $subsys:$sysname — pci:0000:00:1f.2
* sysname() has '!' translated, get it from devpath
*/
const char *sysname;
return 0;
}
- printf("Host: %s -- Serv: %s\n", strna(host), strna(serv));
+ printf("Host: %s — Serv: %s\n", strna(host), strna(serv));
return 0;
}
int main(int argc, char **argv) {
test_table(bond_mode, NETDEV_BOND_MODE);
- /* test_table(link_state, LINK_STATE); -- not a reversible mapping */
+ /* test_table(link_state, LINK_STATE); — not a reversible mapping */
test_table(link_operstate, LINK_OPERSTATE);
test_table(address_family_boolean, ADDRESS_FAMILY_BOOLEAN);
test_table(netdev_kind, NETDEV_KIND);
}
if (arg_link_journal == LINK_HOST) {
- /* don't create parents here -- if the host doesn't have
+ /* don't create parents here — if the host doesn't have
* permanent journal set up, don't force it here */
if (mkdir(p, 0755) < 0 && errno != EEXIST) {
Y https://tools.ietf.org/html/rfc1034 → DOMAIN NAMES - CONCEPTS AND FACILITIES
Y https://tools.ietf.org/html/rfc1035 → DOMAIN NAMES - IMPLEMENTATION AND SPECIFICATION
? https://tools.ietf.org/html/rfc1101 → DNS Encoding of Network Names and Other Types
-Y https://tools.ietf.org/html/rfc1123 → Requirements for Internet Hosts -- Application and Support
+Y https://tools.ietf.org/html/rfc1123 → Requirements for Internet Hosts — Application and Support
~ https://tools.ietf.org/html/rfc1464 → Using the Domain Name System To Store Arbitrary String Attributes
Y https://tools.ietf.org/html/rfc1536 → Common DNS Implementation Errors and Suggested Fixes
Y https://tools.ietf.org/html/rfc1876 → A Means for Expressing Location Information in the Domain Name System
}
if (r > 0) {
- /* If this link used to be managed, but is now unmanaged, flush all our settings -- but only once. */
+ /* If this link used to be managed, but is now unmanaged, flush all our settings — but only once. */
if (l->is_managed)
link_flush_settings(l);
* http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
*
* Two character prefixes based on the type of interface:
- * en -- Ethernet
- * sl -- serial line IP (slip)
- * wl -- wlan
- * ww -- wwan
+ * en — Ethernet
+ * sl — serial line IP (slip)
+ * wl — wlan
+ * ww — wwan
*
* Type of names:
- * b<number> -- BCMA bus core number
- * c<bus_id> -- CCW bus group name, without leading zeros [s390]
- * o<index>[d<dev_port>] -- on-board device index number
- * s<slot>[f<function>][d<dev_port>] -- hotplug slot index number
- * x<MAC> -- MAC address
+ * b<number> — BCMA bus core number
+ * c<bus_id> — CCW bus group name, without leading zeros [s390]
+ * o<index>[d<dev_port>] — on-board device index number
+ * s<slot>[f<function>][d<dev_port>] — hotplug slot index number
+ * x<MAC> — MAC address
* [P<domain>]p<bus>s<slot>[f<function>][d<dev_port>]
- * -- PCI geographical location
+ * — PCI geographical location
* [P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>]
- * -- USB port number chain
+ * — USB port number chain
*
* All multi-function PCI devices will carry the [f<function>] number in the
* device name, including the function 0 device.
const char *attr;
int idx;
- /* ACPI _DSM -- device specific method for naming a PCI or PCI Express device */
+ /* ACPI _DSM — device specific method for naming a PCI or PCI Express device */
attr = udev_device_get_sysattr_value(names->pcidev, "acpi_index");
- /* SMBIOS type 41 -- Onboard Devices Extended Information */
+ /* SMBIOS type 41 — Onboard Devices Extended Information */
if (!attr)
attr = udev_device_get_sysattr_value(names->pcidev, "index");
if (!attr)
if (l == 0)
names->pci_path[0] = '\0';
- /* ACPI _SUN -- slot user number */
+ /* ACPI _SUN — slot user number */
pci = udev_device_new_from_subsystem_sysname(udev, "subsystem", "pci");
if (!pci) {
err = -ENOENT;
projects / thirdparty / systemd.git / commitdiff
