parse-util: allow '-0' as alternative to '0' and '+0'
Let's allow "-0" as alternative to "+0" and "0" when parsing integers,
unless the new SAFE_ATO_REFUSE_PLUS_MINUS flag is specified.
In cases where allowing the +/- syntax shall not be allowed
SAFE_ATO_REFUSE_PLUS_MINUS is the right flag to use, but this also means
that -0 as only negative integer that fits into an unsigned value should
be acceptable if the flag is not specified.
Michal Sekletár [Thu, 30 Apr 2020 21:22:08 +0000 (23:22 +0200)]
test: add integration test for udev event timeout
Note that run_test() calls coredumpctl in a loop because in certain
environments (1 vCPU unaccelerated QEMU VM) it might take quite a
while to process the coredump.
networkd: start a DBus interface for the DHCP server
Add a "org.freedesktop.network1.DHCPServer" DBus interface that will be
added on a link path where a DHCP server is provided.
Currently, it only exposes a "Leases" property, although there are plans
to expand it further. The property is updated thanks to the
dhcp_server_callback().
This makes the output more predictable. Also, interesting interfaces
are often the low-numbered ones (actual hardware links, not virtual
devices stacked on top), and this makes them more visible.
Those lists are very long and use up a significant chunk of screen real estate.
But the contents are mostly static (usually they just reflect built-in
configuration). Let's just not show them in 'status' output. They can still
be viewed with 'nta' verb.
Instead of reading the mtime off the configuration files after reading,
let's do so before reading, but with the fd we read the data from. This
is not only cleaner (as it allows us to save one stat()), but also has
the benefit that we'll detect changes that happen while we read the
files.
This also reworks unit file drop-ins to use the common code for
determining drop-in mtime, instead of reading system clock for that.
> [kernel uses] msleep_interruptible() and that means when the process receives
> any kind of signal masked or not this will abort with EINTR. systemd-logind
> gets signals from the TTY layer all the time though.
> Here's what might be happening: while logind reads the EFI stuff it gets a
> series of signals from the TTY layer, which causes the read() to be aborted
> with EINTR, which means logind will wait 50ms and retry. Which will be
> aborted again, and so on, until quite some time passed. If we'd not wait for
> the 50ms otoh we wouldn't wait so long, as then on each signal we'd
> immediately retry again.
man: add note that emergency.target inherits mount state
Based on an internal discussion whether emergency.target should remount disks
ro, or maybe remount them rw, or do nothing. In some cases people want to boot
ro, and always remounting rw would break that. In other cases, remounting disks
ro after they have already been mounted rw is mostly pointless and might even
not be possible. So let's just document that we don't change the state.
Also: any→other, since emergency.service *is* pulled in.
Also: just advertise "emergency" as the way to boot into the target.
We are not going to remove this option, and it's way easier to type than
"systemd.unit=emergency.target".
Luca Boccassi [Mon, 1 Jun 2020 11:24:10 +0000 (12:24 +0100)]
test: temporarily block test 48 on Ubuntu's autopkgtest
This test runs fine locally (both on Qemu and nspawn) but sporadically fails on
autopkgtest for some reason.
Disable it while the issue is investigated to reduce noise.
basic/user-util: always use base 10 for user/group numbers
We would parse numbers with base prefixes as user identifiers. For example,
"0x2b3bfa0" would be interpreted as UID==45334432 and "01750" would be
interpreted as UID==1000. This parsing was used also in cases where either a
user/group name or number may be specified. This means that names like
0x2b3bfa0 would be ambiguous: they are a valid user name according to our
documented relaxed rules, but they would also be parsed as numeric uids.
This behaviour is definitely not expected by users, since tools generally only
accept decimal numbers (e.g. id, getent passwd), while other tools only accept
user names and thus will interpret such strings as user names without even
attempting to convert them to numbers (su, ssh). So let's follow suit and only
accept numbers in decimal notation. Effectively this means that we will reject
such strings as a username/uid/groupname/gid where strict mode is used, and try
to look up a user/group with such a name in relaxed mode.
Since the function changed is fairly low-level and fairly widely used, this
affects multiple tools: loginctl show-user/enable-linger/disable-linger foo',
the third argument in sysusers.d, fourth and fifth arguments in tmpfiles.d,
etc.
Luca Boccassi [Thu, 7 May 2020 22:26:53 +0000 (23:26 +0100)]
core: reload cache if it's dirty when starting a UNIT_NOT_FOUND unit
The time-based cache allows starting a new unit without an expensive
daemon-reload, unless there was already a reference to it because of
a dependency or ordering from another unit.
If the cache is out of date, check again if we can load the
fragment.
This is an attempt to clean-up the DHCP lease server type code a bit. We
now strictly use the same enum everywhere, and store server info in an
array. Moreover, we use the same nomenclature everywhere.
This only makes the changes in the sd-dhcp code. The networkd code is
untouched so far (but should be fixed up like this too. But it's more
complicated since this would then touch actual settings in .network
files).
Note that this also changes some field names in serialized lease files.
But given that these field names have not been part of a released
version of systemd yet, such a change should be ok.
This is pure renaming/refactoring, shouldn't actually change any
behaviour.
Susant Sahani [Sat, 30 May 2020 04:35:28 +0000 (06:35 +0200)]
network: L2TP fix crash
```
=220358== Invalid read of size 8
==220358== at 0x452F05: l2tp_session_free (l2tp-tunnel.c:46)
==220358== by 0x456926: l2tp_tunnel_done (l2tp-tunnel.c:725)
==220358== by 0x43CF4D: netdev_free (netdev.c:205)
==220358== by 0x43D045: netdev_unref (netdev.c:210)
==220358== by 0x4198B7: manager_free (networkd-manager.c:1877)
==220358== by 0x40D0B3: manager_freep (networkd-manager.h:105)
==220358== by 0x40DE1C: run (networkd.c:21)
==220358== by 0x40DE75: main (networkd.c:130)
==220358== Address 0x5c035d0 is 0 bytes inside a block of size 40 free'd
==220358== at 0x483A9F5: free (vg_replace_malloc.c:538)
==220358== by 0x452F87: l2tp_session_free (l2tp-tunnel.c:57)
==220358== by 0x456857: netdev_l2tp_tunnel_verify (l2tp-tunnel.c:710)
==220358== by 0x440947: netdev_load_one (netdev.c:738)
==220358== by 0x441222: netdev_load (netdev.c:851)
==220358== by 0x419C50: manager_load_config (networkd-manager.c:1934)
==220358== by 0x40D7BE: run (networkd.c:87)
==220358== by 0x40DE75: main (networkd.c:130)
==220358== Block was alloc'd at
==220358== at 0x4839809: malloc (vg_replace_malloc.c:307)
==220358== by 0x452A76: malloc_multiply (alloc-util.h:96)
==220358== by 0x4531E6: l2tp_session_new_static (l2tp-tunnel.c:82)
==220358== by 0x455C01: config_parse_l2tp_session_id (l2tp-tunnel.c:535)
==220358== by 0x48E6D72: next_assignment (conf-parser.c:133)
==220358== by 0x48E77A3: parse_line (conf-parser.c:271)
==220358== by 0x48E7E4F: config_parse (conf-parser.c:396)
==220358== by 0x48E80E5: config_parse_many_files (conf-parser.c:453)
==220358== by 0x48E8490: config_parse_many (conf-parser.c:512)
==220358== by 0x44089C: netdev_load_one (netdev.c:729)
==220358== by 0x441222: netdev_load (netdev.c:851)
==220358== by 0x419C50: manager_load_config (networkd-manager.c:1934)