fwSmit [Sat, 7 Nov 2020 11:20:03 +0000 (12:20 +0100)]
hwdb: Add support for HP ZBook Studio G5 keyboard (#17525)
I tested this on my ZBook Studio G5. I'm not sure if this works for other ZBook studio machines.
I have two more notes on this PR:
- some keys send multiple scancodes. I matched only on one of them, because I couldn't figure out how to match
on all of them. This results in the others still being visible:
Event: time 1604520228.146226, -------------- SYN_REPORT ------------
Event: time 1604520228.151533, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.151533, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1
Event: time 1604520228.151533, -------------- SYN_REPORT ------------
Event: time 1604520228.259862, type 4 (EV_MSC), code 4 (MSC_SCAN), value 38
Event: time 1604520228.259862, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 0
Event: time 1604520228.259862, -------------- SYN_REPORT ------------
Event: time 1604520228.259944, type 4 (EV_MSC), code 4 (MSC_SCAN), value 66
Event: time 1604520228.259944, type 1 (EV_KEY), code 218 (KEY_CONNECT), value 0
Event: time 1604520228.259944, -------------- SYN_REPORT ------------
Event: time 1604520228.266513, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.266513, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0
Event: time 1604520228.266513, -------------- SYN_REPORT ------------
I wanted to set the display key to switchvideomode, but another key is already set to that, so I set it to displaytoggle instead.
Michal Sekletár [Fri, 23 Oct 2020 14:30:23 +0000 (16:30 +0200)]
udev: make algorithm that selects highest priority devlink less susceptible to race conditions
Previously it was very likely, when multiple contenders for the symlink
appear in parallel, that algorithm would select wrong symlink (i.e. one
with lower-priority).
Now the algorithm is much more defensive and when we detect change in
set of contenders for the symlink we reevaluate the selection. Same
happens when new symlink replaces already existing symlink that points
to different device node.
basic/stat-util: make mtime check stricter and use entire timestamp
Note that st_mtime member of struct stat is defined as follows,
#define st_mtime st_mtim.tv_sec
Hence we omitted checking nanosecond part of the timestamp (struct
timespec) and possibly would miss modifications that happened within the
same second.
FixedRandomDelay=yes will use
`siphash24(sd_id128_get_machine() || MANAGER_IS_SYSTEM(m) || getuid() || u->id)`,
where || is concatenation, instead of a random number to choose a value between
0 and RandomizedDelaySec= as the timer delay.
This essentially sets up a fixed, but seemingly random, offset for each timer
iteration rather than having a random offset recalculated each time it fires.
selinux: also try the netlink-based fallback and continue on permission error
Fedora Rawhide still has the old policy, so selinux prevents our selinux code
from checking if selinux is enabled. But it seems smart to fall back to the old
API anyway.
Topi Miettinen [Mon, 2 Nov 2020 11:10:24 +0000 (13:10 +0200)]
shared/seccomp-util: move stime() to @obsolete
Quoting the manual page of stime(2): "Starting with glibc 2.31, this function
is no longer available to newly linked applications and is no longer declared
in <time.h>."
If we encounter an RR that has no matching signature, then we don't know
whether it was expanded from a wildcard or not. We need to accept that
and not make the NSEC test fail, just skip over the RR.
resolved: put size limit in DnsAnswer size to UINT16_MAX
The three answer sections can only carry up to UINT16_MAX entries, hence
put a hard upper limit on how far DnsAnswer can grow. The three count
fields in the DNS packet header are 16 bit only, hence the limit.
If code actually tries to add more than 64K RRs it will get ENOSPC with
this new checking.
Rasmus Villemoes [Fri, 30 Oct 2020 09:18:04 +0000 (10:18 +0100)]
string-util: improve overflow checking
The current overflow checking is broken in the corner case of the strings'
combined length being exactly SIZE_MAX: After the loop, l would be SIZE_MAX,
but we're not testing whether the l+1 expression overflows.
Fix it by simply pre-accounting for the final '\0': initialize l to 1 instead
of 0.
Rasmus Villemoes [Fri, 30 Oct 2020 09:13:27 +0000 (10:13 +0100)]
string-util: simplify logic in strjoin_real()
The loops over (x, then all varargs, until a NULL is found) can be written much
simpler with an ordinary for loop. Just initialize the loop variable to x, test
that, and in the increment part, fetch the next va_arg(). That removes a level
of indentation, and avoids doing a separate strlen()/stpcpy() call for x.
While touching this code anyway, change (size_t)-1 to the more readable
SIZE_MAX.
I got various cases wrong:
"usb:v04F3p2B7Cd5912dc00dsc00dp00ic03isc00ip00in00"
"usb:v0627p0001:QEMU USB Tablet"
"input:b0003v0627p0001e0001-e0,1,2,4,k110,111,112,r0,1,8,B,am4,lsfw"
OTOH:
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
is OK. Other parts follow after 'pn'.
-mouse:*:name:*Trackball*:*
-mouse:*:name:*trackball*:*
-mouse:*:name:*TrackBall*:*
+mouse:*:name:*Trackball*:
+mouse:*:name:*trackball*:
+mouse:*:name:*TrackBall*:
... and anything else with :name should be OK too, because our imports always
include ":" at the end:
IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'"
Including '*' at the end makes the pattern work even if we decide to add
something to the match string later.
fileio: beef up READ_FULL_FILE_CONNECT_SOCKET to allow setting sender socket name
This beefs up the READ_FULL_FILE_CONNECT_SOCKET logic of
read_full_file_full() a bit: when used a sender socket name may be
specified. If specified as NULL behaviour is as before: the client
socket name is picked by the kernel. But if specified as non-NULL the
client can pick a socket name to use when connecting. This is useful to
communicate a minimal amount of metainformation from client to server,
outside of the transport payload.
Specifically, these beefs up the service credential logic to pass an
abstract AF_UNIX socket name as client socket name when connecting via
READ_FULL_FILE_CONNECT_SOCKET, that includes the requesting unit name
and the eventual credential name. This allows servers implementing the
trivial credential socket logic to distinguish clients: via a simple
getpeername() it can be determined which unit is requesting a
credential, and which credential specifically.
Example: with this patch in place, in a unit file "waldo.service" a
configuration line like the following:
LoadCredential=foo:/run/quux/creds.sock
will result in a connection to the AF_UNIX socket /run/quux/creds.sock,
originating from an abstract namespace AF_UNIX socket:
@$RANDOM/unit/waldo.service/foo
(The $RANDOM is replaced by some randomized string. This is included in
the socket name order to avoid namespace squatting issues: the abstract
socket namespace is open to unprivileged users after all, and care needs
to be taken not to use guessable names)
The services listening on the /run/quux/creds.sock socket may thus
easily retrieve the name of the unit the credential is requested for
plus the credential name, via a simpler getpeername(), discarding the
random preifx and the /unit/ string.
This logic uses "/" as separator between the fields, since both unit
names and credential names appear in the file system, and thus are
designed to use "/" as outer separators. Given that it's a good safe
choice to use as separators here, too avoid any conflicts.
This is a minimal patch only: the new logic is used only for the unit
file credential logic. For other places where we use
READ_FULL_FILE_CONNECT_SOCKET it is probably a good idea to use this
scheme too, but this should be done carefully in later patches, since
the socket names become API that way, and we should determine the right
amount of info to pass over.
Martin Wilck [Thu, 26 Apr 2018 11:25:11 +0000 (13:25 +0200)]
test/udev-test.pl: suppress umount error message at startup
umount emits an error message "no mount point specified" if the
tmpfs isn't mounted yet, which is the normal case.
Suppress that by redirecting stderr.
Martin Wilck [Wed, 25 Apr 2018 15:21:49 +0000 (17:21 +0200)]
test/sd-script.py: new helper script for udev testing
Script for generating LOTS of SCSI disk and partition devices in
the fake sysfs we use for udev testing.
This script is supposed to be run after sys-script.py. It uses
code from sys-script.py as template to generate additional SCSI disk data
structures. Together with the "generator" code in udev-test.pl
added in the previous patch, it allows to run udev tests with almost
arbitrarily many devices, and thus to do performance scaling tests.
Martin Wilck [Wed, 25 Apr 2018 07:54:26 +0000 (09:54 +0200)]
test/udev-test.pl: generator for large list of block devices
Manually listing all devices in the test definition becomes cumbersome with
lots of devices. Add a function that scans on all block devices in
the test sysfs and generates a list of devices to test.
Martin Wilck [Tue, 24 Apr 2018 20:04:55 +0000 (22:04 +0200)]
tests/udev-test.pl: add multiple device test
Add 4 new tests using multiple devices. Number 2-4 use many
devices claiming the same symlink, where only one device has
a higher priority thatn the others. They fail sporadically with
the current code, if a race condition causes the symlink to point
to the wrong device. Test 4 is like test 2 with sleeps in between,
it's much less likely to fail.
Martin Wilck [Tue, 24 Apr 2018 16:08:18 +0000 (18:08 +0200)]
test/udev-test.pl: last_rule is unsupported
the "last_rule" option hasn't been supported for some time.
Therefore this test fails if a "not_exp_links" attribute is added,
as it should be. Mark it appropriately.
Martin Wilck [Tue, 24 Apr 2018 08:50:24 +0000 (10:50 +0200)]
test/udev-test.pl: test correctness of symlink targets
Test if symlinks are created correctly by comparing the symlink
targets to the devnode path. This implies (for the symlink) that
major/minor numbers and permissions are correct, as we have tested
that on the devnode already.
Martin Wilck [Mon, 23 Apr 2018 19:59:05 +0000 (21:59 +0200)]
test/udev-test.pl: allow concurrent additions and removals
Allow testing cases where multiple devices are added and removed
simultaneously. Tests are started as synchronously as possible using a
semaphore, in order to test possible race conditions. If this isn't desired,
the test parameter "sleep_us" can be set to the number of microseconds to wait
between udev invocations.
Martin Wilck [Fri, 20 Apr 2018 20:38:30 +0000 (22:38 +0200)]
test/udev-test.pl: allow multiple devices per test
Allow testing cases where multiple devices are added and removed.
This implies a change of the data structure: every test allows
for multiple devices to be added, and "exp_name" etc. are now properties
of the device, not of the test.
Yu, Li-Yu [Tue, 20 Oct 2020 16:38:21 +0000 (00:38 +0800)]
udev: escaped string syntax e"..." in rule files
* Existing valid rule files written with KEY="value" are not affected
* Now, KEY=e"value\n" becomes valid. Where `\n` is a newline character
* Escape sequences supported by src/basic/escape.h:cunescape() is
supported
headers: use custom LicenseRef- spdx tag for various "public domain" files
There is no spdx tag defined for those versions of "public domain", but we can
add a custom tag, see
https://spdx.github.io/spdx-spec/6-other-licensing-information-detected/.
projects / thirdparty / systemd.git / log
